HTC Desire 601/HTC Zara - room,root,mods - HTC Desire 601

somebody got root?
CWMRecovery or TWRP no more?
so soon compile)

I also would like to know

Does anyone have stock recovery?

hello
I too am interested

standak14 said:
Does anyone have stock recovery?
Click to expand...
Click to collapse
https://docs.google.com/folder/d/0B6WBFlAKqe30YnFxVHVHMFo1X0k/edit

SPSPaWn said:
https://docs.google.com/folder/d/0B6WBFlAKqe30YnFxVHVHMFo1X0k/edit
Click to expand...
Click to collapse
Thanks. Currently there are no recovery does not work? Thank you for your work

ТAMPERED - shows that the guarantee came off ( as in the last boot from SGS4 - WARANTY BIT 1)
But in our case, it can be cured, only writes RELOCKED - and thus guarantee in place) (handed over to RELOCKED than one device )
1. Set the boot (unsecured) - fastboot flash boot boot_init.img
2 . Boot and enable developer mode ( repeatedly click on the " Version - > Advanced- > Build Number " )
3 . Download the revone: http://revolutionary.io/revone
4 . Load on the device - adb push revone /data/local/tmp/
5 . We go in the shell - adb shell (c boot unsecured all root- s commands work without root )
6. In shell :
cd /data/local/tmp
chmod 755 revone
./revone -t - TAMPERED disappear before your next intervention
7. Being in shell reboot into fastboot - reboot bootloader
8. Flash stock boot and recovery
fastboot flash boot boot_stock.img
fastboot flash recovery recovery_stock.img
9. Lock bootloader
fastboot oem lock
10 . EVERYTHING in the loader will only write RELOCKED
P.S. For those who have unlocked the bootloader and who writes TAMPERED
development HTC Desire 601/ZARA in my drive

+1 Owner of Zara looking for SU...

Make us a sectiooon, please xda!
And SPSPaWn, have you rooted your zara yet?

Hello! I am searching for su too. Any help is welcome.

Root is. But without CWMRecovery description will be. Difficult)
Dumps did everything. Even deodex did too) stuck on recover
p.s. Compiled pieces 20 neither went. Maybe put the protection (

Concerning CMWRecovery or TWRPRecovery thoughts ran!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Who is strong in linux all thoughts are welcome, the development environment and source CM - 10.1, 10.2, Jellybean ready for compilation .......
all recovery - it is not possible to get there, go into overdrive (fastboot erase cache - does not help ((((
repository development HTC Zara - http://goo.gl/PpKL8T - who can continue in tandem?)
p.s. no custom recovery obtaining root (safely) is not possible)

SPSPaWn said:
Concerning CMWRecovery or TWRPRecovery thoughts ran!
View attachment 2401666
Who is strong in linux all thoughts are welcome, the development environment and source CM - 10.1, 10.2, Jellybean ready for compilation .......
all recovery - it is not possible to get there, go into overdrive (fastboot erase cache - does not help ((((
repository development HTC Zara - http://goo.gl/PpKL8T - who can continue in tandem?)
p.s. no custom recovery obtaining root (safely) is not possible)
Click to expand...
Click to collapse
Regarding the screenshot, did you succesfully obtain root access?

djtinxo said:
Regarding the screenshot, did you succesfully obtain root access?
Click to expand...
Click to collapse
Yes, but root it is temporary

SPSPaWn said:
Yes, but root it is temporary
Click to expand...
Click to collapse
Instructions, please

standak14 said:
Instructions, please
Click to expand...
Click to collapse
instructions will not be
not yet compile recovery

SPSPaWn said:
instructions will not be
not yet compile recovery
Click to expand...
Click to collapse
Maybe someone in this thread
http://forum.xda-developers.com/showthread.php?t=2456795&page=2
Click to expand...
Click to collapse
could help you to make custom recovery for this device
I'm looking forward for custom ROM on this device cause I'm planning to buy one

Guys who are nice enough and have spare time, please do a clean system dump for me for some sort of dev purpose, I mean in factory reset status. Use cwm and do a backup, zip/7zip it and upload it to google drive or dropbox. Thanks.

**

TheEndHK said:
Guys who are nice enough and have spare time, please do a clean system dump for me for some sort of dev purpose, I mean in factory reset status. Use cwm and do a backup, zip/7zip it and upload it to google drive or dropbox. Thanks.
Click to expand...
Click to collapse
Is it possible to use CWM, because Desire 601 is not yet fully rooted as mentioned by SPSPaWn?
He said he could only obtain temporary root, is it possible/safe to install CWM?

Related

[RECOVERY] Rooting HTC One X+ | ClockworkMod Recovery 0.3 [16.11.2012]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recovery
Download
Don't use it if you have HTC One X+ from AT&T​
Version 0.3
- Fixed mounting SD card inside recovery
Issues:
- None found yet
How to flash:
- unlock your bootloader via htcdev site
- rename the file to "recovery.img"
- go to bootloader ---> fastboot
- type "fastboot flash recovery recovery.img"
Rooting Tools
Download​
How to flash:
- from inside recovery
You flash it all at your own risk!
Thanks to olhel, konsti23 & orb3000 for help in tests​
Cool! Thanx!! Go flashing )) Done. Seems everything looks good))
Hmm, cant mount /sdcard
Atze001 said:
Hmm, cant mount /sdcard
Click to expand...
Click to collapse
Yes, I'm working on it.
Does it mean at this stage we cant flash SU?
Thanks Mike,
great that you are working on a custom recovery so that we can flash your custom rom Go ahead...
Atze001 said:
Does it mean at this stage we cant flash SU?
Click to expand...
Click to collapse
Correct. I know where the issue is and I will fix it as soon as possible Without the device it might take bit longer, but I will surely fix it
mike1986. said:
Correct. I know where the issue is and I will fix it as soon as possible Without the device it might take bit longer, but I will surely fix it
Click to expand...
Click to collapse
No Hurry. Great Work :good:
Thanks Mike!
As I am already rooted just to flash recovery and ready to test a custom ROM right?
orb3000 said:
Thanks Mike!
As I am already rooted just to flash recovery and ready to test a custom ROM right?
Click to expand...
Click to collapse
Not yet mate, mounting internal sd card doesnt work yet.
Sent from my HTC One X
Thanks mate, all clear now.
Great work!
Cheers,
Same problem as the other recovery.
Sent from my HTC One V using Tapatalk 2
shubhamchamaria said:
Same problem as the other recovery.
Sent from my HTC One V using Tapatalk 2
Click to expand...
Click to collapse
HTC used different method to manage internal sdcard in the device then one x thats why we have problems.
Sent from my HTC One X
Someone with rooted hox+ can join my IRC channel for few minutes?
Recovery fixed, have fun
Confirmed working!!!!
Doing nandroidbackup to flash custom ROM after!!
Thanks Mike1986 and Lloir!!
building my toolkit now. Thanks Mike and Lloir!
Yeah...so I tried it on the AT&T version of the One X+. CWM installs OK, but when you reboot into recovery you get the following error:
E:Can't mount /sdcard/
Of course now, the phone will no-longer boot into anything other than recovery or bootloader. Any ideas?
orb3000 said:
Confirmed working!!!!
Doing nandroidbackup to flash custom ROM after!!
Thanks Mike1986 and Lloir!!
Click to expand...
Click to collapse
sorry for the dumb question but how to "fashboot" flash recovery?
jimok82 said:
Yeah...so I tried it on the AT&T version of the One X+. CWM installs OK, but when you reboot into recovery you get the following error:
E:Can't mount /sdcard/
Of course now, the phone will no-longer boot into anything other than recovery or bootloader. Any ideas?
Click to expand...
Click to collapse
Flash RUU. I dont think this recovery will work on att variant.
Sent from my HTC One X

[toolbox] OnePlus One Toolbox

How to use by TK
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Whats new in V6
Updated TWRP to 2.8.6.0
Updated SuperSu to 2.46
Easily copy SuperSu to your Device with “Prepare”
This version don’t come with CM. You can download CM12S and flash with Recovery. Click here for more details
Features
Lock/Unlock Bootloader
Install Custom Recovery (CWM, TWRP & Philz)
Install Stock Recovery
Root Device (Manual)
Note
Please download V6 if you are going to Unlock bootloader, Root, Change Recovery. Because others include CM11S installation files which is huge.
Download Link:
Click Here
Hints (Manual)
Enter fastboot mode: Turn the phone off. Hold volume up + power until the "fastboot" screen appears.
Make sure you have drivers installed.
Looks good!!! Can i do a feature request? Can you add "flash stock img" in newer versions? Thanks in advance.
acuicultor said:
Looks good!!! Can i do a feature request? Can you add "flash stock img" in newer versions? Thanks in advance.
Click to expand...
Click to collapse
You mean latest CM11s?
alex.inthi said:
You mean latest CM11s?
Click to expand...
Click to collapse
I mean full stock rom cm11s no matter which version, i think only XNPH22Q. Is available for flash using fastboot commands.
http://forum.xda-developers.com/showthread.php?t=2765455
acuicultor said:
I mean full stock rom cm11s no matter which version, i think only XNPH22Q. Is available for flash using fastboot commands.
http://forum.xda-developers.com/showthread.php?t=2765455
Click to expand...
Click to collapse
Now you can install CM11S. v2 is up.
alex.inthi said:
Now you can install CM11S. v2 is up.
Click to expand...
Click to collapse
Thanks, you are so fast!!!!
I did not understand if the phone goes offline when it is still turned off and then turn it on in fastboot mode manually.
pablomoreno said:
I did not understand if the phone goes offline when it is still turned off and then turn it on in fastboot mode manually.
Click to expand...
Click to collapse
Turn off the device, then enter fastboot mode (bootloader), connect usb, profit.
Hello
Hello;
i have a Oneplus 64Go.
I have donwload your toolbox.
When i click in Boot Fastboot
The Phone reboot.
and i ask a question in chinese , i click left and then the phone reboot and my phone is whip
Best regard.
Toufic
toufic48 said:
Hello;
i have a Oneplus 64Go.
I have donwload your toolbox.
When i click in Boot Fastboot
The Phone reboot.
and i ask a question in chinese , i click left and then the phone reboot and my phone is whip
Best regard.
Toufic
Click to expand...
Click to collapse
Looks like you just unlocked your bootloader... It's standard procedure is to wipe the phone after that.
Hi! When I start this tooblox and check if the device is attached, I see that it is. But when in fastboot mode, it's not. Help please.
Regards
SWEEEEET NICE :good:
Might be a dumb question, but can this also add support to install color os?
Windows only? It seems to be nohting more than tool that executes adb and fastboot commads, but should be useful for newbies
I can't use Google Play after rooted the phone.
Recovery: CWM
Any help?
Thanks.
Why is the file over 400MB big?
Linux4ever85 said:
Why is the file over 400MB big?
Click to expand...
Click to collapse
App, tools, system image (cm ROM), I think...
Sent from my Sony Xperia™ Z using Tapatalk 4
Would routing wipe my phone and is there any advantages in unlocking the boot loader... Sorry I'm coming an S3 rooting was very simple on it!
Great job OP! It only took me 10 minutes from downloading, to unlocking the bootloader and flashing a Custom Recovery. Thanks
jojohnson250 said:
Would routing wipe my phone and is there any advantages in unlocking the boot loader... Sorry I'm coming an S3 rooting was very simple on it!
Click to expand...
Click to collapse
Yes, unlocking the bootloader then rooting the device will wipe it. You can perform a back up first though. The advantages of rooting are many, to numerous to list here but put simply it allows you to change just about every facet of the phone.

Lollipop OTA Update: Download and How-To (Root Required)

I've never done one of these before so I'll give it my best shot. It assumes you know how to get ADB working on your watch.
Go here for adb help.
**This only works on bootloader unlocked, rooted devices. The tool at the link above can help you achieve this requirement.** -thanks 7dk
Download Link: Here
MD5 Checksum: AC0F2B4AA2C1B5199789F2770CDA5B06
Directions:
0) YOU MUST BE ON ANDROID WEAR VERSION 4.4W2 (BUILD KNX01Q) IN ORDER TO FLASH THIS OTA
1) Install ADB and successfully connect to your watch over ADB.
2) Rename the install ZIP to 'update.zip' if not already done so.
3) Move the ZIP to your ADB directory.
4) Open a command prompt in your ADB directory and follow these commands:
adb push update.zip /sdcard/update.zip
adb shell
su
cp /sdcard/update.zip /cache/update.zip
echo 'boot-recovery ' > /cache/recovery/command
echo '--update_package=/cache/update.zip' >> /cache/recovery/command
reboot recovery
Your watch should now reboot and begin updating.
Thanks to reddit users z0mbiexx and TjPhysicist for getting the link and install working.
Thank You sir.
crazyeats said:
Thank You sir.
Click to expand...
Click to collapse
No problem. Let me know if it works for you.
works only on rooted device, so bootloader must be unlocked, and watch must be pre-rooted.
Works with out any problem! thnx! :good:
I keep getting /system/bin/sh: su: not found
127:[email protected]:/ $
I assume I need the device rooted?
EDIT: post above me clarifies that
jackie_jagger said:
I keep getting /system/bin/sh: su: not found
127:[email protected]:/ $
I assume I need the device rooted?
EDIT: post above me clarifies that
Click to expand...
Click to collapse
Thanks for letting me know! I updated the post to include this requirement.
cmdoptesc47 said:
Thanks for letting me know! I updated the post to include this requirement.
Click to expand...
Click to collapse
Nah mate, thank YOU for all the effort for this post. My watch just completed flashing the update and now I'm on the bootscreen waiting for boot. Shouldn't be long now.
EDIT: Android is upgrading screen. <3
cmdoptesc47 said:
No problem. Let me know if it works for you.
Click to expand...
Click to collapse
Worked great sir! I was unlocked and rooted. I did have to flash stock recovery before I could continue of course. Great stuff. Much appreciated!
KGW42Q --> LWX48P
My G Watch is going in fastboot mode but is stuck at <waiting for device> when trying to unlock bootloader. Any help ?
Hi, I´m in Gohma 1.2 rom, can I upgrade from this Rom directly?
Thanks in advance for you effort.
Ashutos1997 said:
My G Watch is going in fastboot mode but is stuck at <waiting for device> when trying to unlock bootloader. Any help ?
Click to expand...
Click to collapse
It sounds like your computer isn't recognizing your watch as an ADB device when it's in fastboot mode. Usually just monkey around in device manager when this happens, but I'm not great at fixing this issue. I'd look through the comments in that thread for more help.
juansur66 said:
Hi, I´m in Gohma 1.2 rom, can I upgrade from this Rom directly?
Thanks in advance for you effort.
Click to expand...
Click to collapse
I used the tool in the post to restore to stock before I updated just to be safe. It might work without a restore, but I've never tried it before. I'd probably recommend a restore, but you're welcome to give it a shot.
Nice
cmdoptesc47 said:
It sounds like your computer isn't recognizing your watch as an ADB device when it's in fastboot mode. Usually just monkey around in device manager when this happens, but I'm not great at fixing this issue. I'd look through the comments in that thread for more help.
Click to expand...
Click to collapse
The device gets recognized in adb devices but not in fastboot.
cmdoptesc47 said:
I used the tool in the post to restore to stock before I updated just to be safe. It might work without a restore, but I've never tried it before. I'd probably recommend a restore, but you're welcome to give it a shot.
Click to expand...
Click to collapse
Thanks for quick reply, I will wait cause I´m little nob.
juansur66 said:
Thanks for quick reply, I will wait cause I´m little nob.
Click to expand...
Click to collapse
I just used the tool and chose option 6 (I think. The the one that says restore)
Ashutos1997 said:
My G Watch is going in fastboot mode but is stuck at <waiting for device> when trying to unlock bootloader. Any help ?
Click to expand...
Click to collapse
If you are using Linux try switching to root user, if Windows right click cmd and run as administrator
good job
very good!!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Paulo_Diablo said:
If you are using Linux try switching to root user, if Windows right click cmd and run as administrator
Click to expand...
Click to collapse
Still same prob

Root, How do adb fastboot commands work? need help

Hello, I am student at my university studying Computer Science. I work in tech support at my school. This is the first time I have modified the android os. The community on xda has been really helpful and knowledgeable. I have created an account to see if anyone else has done the same thing I have. Anyway read below for my post.
I am trying to change the recovery on my phone to twrp. Let me start out by saying I rooted my phone before on build number 130 (KIW-L24,Android 5.1,EMUI 3.1,C567B130,United States, Channel-Others). I used the instructions here and it worked http://forum.xda-developers.com/honor-5x/development/root-kiw-l24-usa-kiwi-t3305190.
I then decided to update through the huawei updater to build number 151 (KIW-L24, Android 5.1, EMUI 3.1, C567B151, United States, Channel-Others). It eventually got to a black EMUI menu with installing 0%. So I powered it off even though it warned against it. So my phone was bricked so I followed instructions at http://forum.xda-developers.com/honor-5x/help/bricked-honor-5x-t3328308 and my phone worked again.
Okay so now I want to root my phone so I follow the instructions for rooting. Problem is that I can not replace the EMUI recovery with twrp recovery. I am guessing that it may be because 151 is a security update.
I use these commands on adb with the twrp_kiwi.img in my adb folder(named .android by default)
adb reboot bootloader
fastboot flash recovery twrp_kiwi.img
fastboot reboot
adb reboot recovery
So I wanted to see if I could put the old firmware back so I followed the instructions for bricked device. But the fastboot commands don't seem to do anything with the .img files.
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
fastboot reboot
Yea so I am lost as to why fastboot commands arent working as it says finished and any advice would be appreciated.
Also is it possible to format the phone similar to a pc and use adb to flash the firmware back on.
I want to eventually backup my phone and put cyanogenmod on it.
... I am guessing that it may be because 151 is a security update
Click to expand...
Click to collapse
If your bootloader is unlocked, you should be able to flash what you want.
Have you tried reinstalling the Android device drivers on your PC?
JT-on said:
If your bootloader is unlocked, you should be able to flash what you want.
Have you tried reinstalling the Android device drivers on your PC?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Arobase40 said:
Is this really for a private use unless you are trying to ask us to do your university exercises for you ? LOL
And as you felt need to mention "I am student at my university studying Computer Science. I work in tech support at my school.", you should know first University mission is to teach you to search and exercise by yourself, to do things step by step and to guess by yourself what was wrong. ^^
Just one tip and advice : read up your own post carefully and you should find out what you've done wrong...
Click to expand...
Click to collapse
That was just background information unrelated to my post. I am currently trying to see if I can put the old firmware back to see if it fixes the problem.
honor5x_student said:
That was just background information unrelated to my post. I am currently trying to see if I can put the old firmware back to see if it fixes the problem.
Click to expand...
Click to collapse
TWRP works just fine on B151
plug in usb / Shut down the phone
boot to the bootloader (power + vol down)
open command prompt on PC
fastboot flash recovery twrp_kiwi.img
hold volume up + volume down + power till you see TWRP (about 14 seconds)
In TWRP choose reboot / recovery
Say yes to Root
recovery will reload / flash your rom
If you want to return to Stock use this >> https://www.androidfilehost.com/?fid=24459283995315154
instructions are in the zip

Development Prototype ABL binaries from Nokia 3.4 and 5.4, for bootloader unlock purpose.

You should've already figured out where are these binaries from. I can't help further for these 2 models.
WARNING: This is not a guide! Prototype ABL binaries are provided as-is, flashing them can be risky!
I'm not responsible for potentially permanent brick!
Nokia 3.4 prototype ABL image has been proved functional.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To use it:
1. Enable flashing permission with HDK (an internal flash tool used by triple-color company, sorry can't disclose more details about that). Please search for related service online, we don't provide or promote such service.
2. Download Prototype ABL from following URL:
Click here for NOKIA 3.4 (DoctorStrange ZQL1838)
Click here for NOKIA 5.4 (DoctorDoom ZQL1849)
3. Flash prototype ABL and OEM unlock enabled frp partition manually, then you can confirm bootloader unlock:
Code:
(for Nokia 3.4) fastboot flash abl DRS-abl.elf
(for Nokia 5.4) fastboot flash abl DRD-abl.elf
(IMPORTANT, DO NOT SKIP) fastboot flash frp frp_oemunlock.img
fastboot reboot-bootloader
fastboot flashing unlock_critical
fastboot oem unlock-go
4. Once bootloader unlock completed, please reinstall stock OS to restore ABL back to normal.
SHA256 checksum of ABL images:
Code:
Nokia 3.4: 79d49737009b1c87f452d814ba6cf5669ccd35a2983f4413f817a7595cb67cfc
Nokia 5.4: 333b221671ed9abe6bd471f29d3c0b14cfeaeebcdc587f882097740f244b93a9
Root Key Hash of ABL images - technically they may interchangable due to same RKH.
Code:
Nokia 3.4: 35631A56E4F0D69967853A758FEF4FF742CF7C6A71B84CE863FE3FCBC70CC394
Nokia 5.4: 35631A56E4F0D69967853A758FEF4FF742CF7C6A71B84CE863FE3FCBC70CC394
This procedure requires specific version of Android? The HDK tool is provided only by the manufacturer?
Rierei said:
This procedure requires specific version of Android? The HDK tool is provided only by the manufacturer?
Click to expand...
Click to collapse
Specific Android version is not required.
HDK access is required to allow you flash any bootloader partitions.
where can i get frp_oemunlock.img and stock os?
are they available with HDK?
Hi guys, I have bootloader unlocked and rooted my Nokia 5.4! however when I tend to delete apps from the system as usual there is always some error! Android 12 February Security Patch!
if anyone wants a recovery image to do a TWRP I can give it!
Someone made it for 3.4?
thimemoria said:
Hi guys, I have bootloader unlocked and rooted my Nokia 5.4! however when I tend to delete apps from the system as usual there is always some error! Android 12 February Security Patch!
Click to expand...
Click to collapse
May you describe how did you manage to unlock the bootloader? Do you have HDK access?
false96 said:
May you describe how did you manage to unlock the bootloader? Do you have HDK access?
Click to expand...
Click to collapse
I got in touch via Telegram with the guy who does the unlocking via TeamViewer or Anydesk and he unlocked it, since the Root process is a little different I had to flash a different boot .img
As I probably can't post links here, whoever wants it I'll send it by PV
Guys, I made a port of TWRP from A3 to Nokia 5.4! Normal boot but need to edit fstab I'll do that and study how it works anything I'll let you know or create a topic!
thimemoria said:
Guys, I made a port of TWRP from A3 to Nokia 5.4! Normal boot but need to edit fstab I'll do that and study how it works anything I'll let you know or create a topic!
Click to expand...
Click to collapse
Great work! Thanks for your efforts. I hope one day we'll have some custom roms.
thimemoria said:
if anyone wants a recovery image to do a TWRP I can give it!
Click to expand...
Click to collapse
could you let me get a copy for the Nokia 5.4
thimemoria said:
As I probably can't post links here, whoever wants it I'll send it by PV
Click to expand...
Click to collapse
hey, I also want one for my Nokia X10!
I´m also interestet in the TWRP for Nokia 5.4 - could you send it to me by PV? Thanks on behalf
thimemoria said:
Hi guys, I have bootloader unlocked and rooted my Nokia 5.4! however when I tend to delete apps from the system as usual there is always some error! Android 12 February Security Patch!
Click to expand...
Click to collapse
That's likely because the system is only mounted as r/o. You can't write there. But maybe I am wrong?
thimemoria said:
if anyone wants a recovery image to do a TWRP I can give it!
Click to expand...
Click to collapse
I never received a message from you about the twrp for Nokia 5.4
does anyone have the twrp for Nokia 5.4
[email protected] said:
does anyone have the twrp for Nokia 5.4
Click to expand...
Click to collapse
eh, no one does. The phone has just had its ABL for bootloader unlocking released, so, of course, there are no TWRP ports for it.
However, you can learn how to port TWRP into the phone (though, really, it'll require you to learn programming and whatnot).
I was going by this post further up the thread.
thimemoria said:
if anyone wants a recovery image to do a TWRP I can give it!

Categories

Resources