I was a little annoyed when I rooted my P600 and lost the ability to use screen mirroring. A bit of searching gave me http://forum.xda-developers.com/showthread.php?t=2421642 showing how to patch libWFD_ENGINE.so. Thanks to everyone on this thread and I have attached a working libWFD_ENGINE.so for my P600 on MK1 / ML1 firmware. Tested using an Actiontec Screenbeam Pro.
Installation:
Using a root-enabled file explorer, like Root Explorer, make a backup of /system/lib/libWFD_ENGINE.so
Download the file below, unzip the zip file, and copy the so file to /system/lib, replacing the one already there (again, make a backup).
Set permissions to 644 / -rw-r--r-- and reboot.
Not tested if it will work on other versions / variants / firmwares
Update, flashed ML1 a couple of days ago and applied the fix again OK.
Excellent work! Did you build this from source? Mind sharing the kernel base?
Worked great thank you.
dasmoover said:
Excellent work! Did you build this from source? Mind sharing the kernel base?
Click to expand...
Click to collapse
No, I just patched the code using Winhex after decompiling with IDA as in the thread I have linked to
apparently it doesn't work on the wifi version because now I'm just stuck at the SAMSUNG screen....I did make a copy of the original file but I'm not sure how I can get it back to where it needs to be because I cannot get ADB to recognize my tablet.
OhioDroid80 said:
apparently it doesn't work on the wifi version because now I'm just stuck at the SAMSUNG screen....I did make a copy of the original file but I'm not sure how I can get it back to where it needs to be because I cannot get ADB to recognize my tablet.
Click to expand...
Click to collapse
I am using this on the P600 wifi, are you using the MK1 firmware ?? Did you setup permissions correctly and did the filesize of the one you backed up look the same ??
TWRP can get you adb, plus the file manager can copy from microsd into your lib directory if needed then setup the correct permissions or use fix permissions from the advanced menu. Be sure to use the 2.6.3.0 version from http://www.techerrata.com/browse/twrp2/lt03wifiue, I used Odin 3.09 to flash the .tar
P600 Wifi Version
MK1 firmware
Just ODIN'd the correct .tar, I used a different TWRP the first time.
---------- Post added at 08:09 PM ---------- Previous post was at 07:27 PM ----------
OhioDroid80 said:
P600 Wifi Version
MK1 firmware
Just ODIN'd the correct .tar, I used a different TWRP the first time.
Click to expand...
Click to collapse
Well I got as far as android is updating but it would not go any further. Testing continues.
Sent from my LG-D801 using Tapatalk
---------- Post added at 08:40 PM ---------- Previous post was at 08:09 PM ----------
My laptop will not recognize my tablet so that I can put that file in a folder so that I can move it with the file manager....hmm.
Still no luck. I even downloaded the zip from the computer and transferred it to a SD card and moved it to the system folder that way and it still will not go past the SAMSUNG screen. I wouldn't care to just flash back to stock with ODIN but I cannot find the firmware without having to pay for the ability to download the file. Does anyone have a download they could share with me? It doesn't really matter which one, I just want my Note back.
OhioDroid80 said:
Still no luck. I even downloaded the zip from the computer and transferred it to a SD card and moved it to the system folder that way and it still will not go past the SAMSUNG screen. I wouldn't care to just flash back to stock with ODIN but I cannot find the firmware without having to pay for the ability to download the file. Does anyone have a download they could share with me? It doesn't really matter which one, I just want my Note back.
Click to expand...
Click to collapse
You didn't look very hard From http://forum.xda-developers.com/showthread.php?t=2516013 gives http://www.samsungis.com/download/XAR-P600UEUBMK1
When you flash this over the top you won't lose any settings etc., just root / recovery
His dropbox is flagged for traffic and the other links to Sammimobile are for paid downloads. Give me the benefit of the doubt for the ability to use Google search and XDA search lol.
Sent from my LG-D801 using Tapatalk
OhioDroid80 said:
His dropbox is flagged for traffic and the other links to Sammimobile are for paid downloads. Give me the benefit of the doubt for the ability to use Google search and XDA search lol.
Click to expand...
Click to collapse
No worries, but you did scroll down through that thread and find the other alternative places to download it ?? !!
I do believe the other options require you to pay for downloading the file. I'm not that desperate yet.
Sent from my LG-D801 using Tapatalk
OhioDroid80 said:
I do believe the other options require you to pay for downloading the file. I'm not that desperate yet.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
This is from the last link I mentioned http://uploaded.net/file/95sl3ijv
Edit, OK, I have Uploaded Premium so can download big files, now I get it !
Paid the 4.99. Hopefully I will be up and running soon. The download speed isn't blazing fast from that website. I have a dedicated line where I work and I'm only seeing max download speeds of 800Kbs. Lesson learned about not making a backup first. I never would have thought that little file could cause so many problems.
Will this work on lte P605?
Sent from my SM-N9005
rcsiccion said:
Will this work on lte P605?
Sent from my SM-N9005
Click to expand...
Click to collapse
It's worth comparing the file sizes 1st to see, I noticed that on the other thread the modification was used across several versions / firmwares of the same device. But make a backup and have a fresh copy of the firmware just incase !
I have P605. I rooted uaing twrp and screen mirror is working perfectly without using this
Sent from my SM-P605 using Tapatalk
Are You using the built in screescreen Mirror app
jpearn said:
I was a little annoyed when I rooted my P600 and lost the ability to use screen mirroring. A bit of searching gave me http://forum.xda-developers.com/showthread.php?t=2421642 showing how to patch libWFD_ENGINE.so. Thanks to everyone on this thread and I have attached a working libWFD_ENGINE.so for my P600 on MK1 firmware. Tested using an Actiontec Screenbeam Pro.
Installation:
Using a root-enabled file explorer, like Root Explorer, make a backup of /system/lib/libWFD_ENGINE.so
Download the file below, unzip the zip file, and copy the so file to /system/lib, replacing the one already there (again, make a backup).
Set permissions to 644 / -rw-r--r-- and reboot.
Not tested if it will work on other versions / variants / firmwares
Click to expand...
Click to collapse
When you use the screen mirror do you just select it from the settings? Or do you use another app? I am thinking about getting an actiontec screen beam pro and would like to know how the setup goes?
Duly.noted said:
When you use the screen mirror do you just select it from the settings? Or do you use another app? I am thinking about getting an actiontec screen beam pro and would like to know how the setup goes?
Click to expand...
Click to collapse
You access it from settings or the toggle in the notifications.
can someone please explain why root breaks screen mirroring? very curious to know...
Related
Hi,
Earlier today I installed CM10 on my phone and so far it's been absolutely fantastic! Very happy with it
One small problem I have is that I've downloaded some themes which go to storage/emulated/0/download (along with all of my downloads when I was on stock) - but I cannot access them? It says my download folder is empty - any ideas please?
Thanks
Read the 4.2 sdcard info link in my signature
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Read the 4.2 sdcard info link in my signature
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks! I've just tried that using ES and couldn't find anything, so plugged it into my PC
Computer\GT-I9300\Internal storage\data\media does not exist
Computer\GT-I9300\Internal storage\Downloads is full of my downloads
So that looks kinda correct. However under settings, then Internal Storage, then Downloads... it's empty
blizeH said:
Thanks! I've just tried that using ES and couldn't find anything, so plugged it into my PC
Computer\GT-I9300\Internal storage\data\media does not exist
Computer\GT-I9300\Internal storage\Downloads is full of my downloads
So that looks kinda correct. However under settings, then Internal Storage, then Downloads... it's empty
Click to expand...
Click to collapse
You can take a look at /mnt/shell/emulated.
blizeH said:
Computer\GT-I9300\Internal storage\data\media does not exist
Click to expand...
Click to collapse
it's not supposed to. your internal storage IS /data/media. and it won't work from the PC
blizeH said:
Thanks! I've just tried that using ES and couldn't find anything
Click to expand...
Click to collapse
Its just you don't know how to use ES perhaps. I updated the post with instructions to use ES
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Its just you don't know how to use ES perhaps. I updated the post with instructions to use ES
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thank you... I'm really sorry but I can't find the ES instructions?
When there is a star next to something* in the middle of a sentence
*you have to match the star at the end of the page
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 10:15 PM ---------- Previous post was at 10:14 PM ----------
Oh bugger. Tapatalk didn't save it this morning. I have to write it again!!!
Edit. OK I added it again and put in some screenshots too.
Sent from my GT-I9300 using Tapatalk 2
Thank you, I've followed the instructions for ES and found my files, I also have them in /sdcard/downloads
The problem is, if I go to downloads (or downloads via the storage menu) it just says "No downloads"
Any ideas what I could be doing wrong please?
Its not screwed.
Download app only records new downloads afaik? It wont pick up old ones that it didn't download itself.
Would need specific error logs from /cache/recovery to even start to troubleshoot recovery issues but its nothing to do with this anyway
Sent from my GT-I9300 using Tapatalk 2
Your downloaded files are sometimes stored in the "Files" folder. Once there, open the "Downloads" folder and it should be there
Emulated/0 is the "new" way to access the internal storage. It was added for an extra layer of permission protection. It stops apps misbehaving behind your back.
Beamed in by telepathy.
Go to the My Files folder. Click All. Click Download folder. There are all the files downloaded from emails.
Hi,
Earlier today I installed CM10 on my phone and so far it's been absolutely fantastic! Very happy with it
One small problem I have is that I've downloaded some themes which go to storage/emulated/0/download (along with all of my downloads when I was on stock) - but I cannot access them? It says my download folder is empty - any ideas please?
nasghosh3 said:
Hi,
Earlier today I installed CM10 on my phone and so far it's been absolutely fantastic! Very happy with it
One small problem I have is that I've downloaded some themes which go to storage/emulated/0/download (along with all of my downloads when I was on stock) - but I cannot access them? It says my download folder is empty - any ideas please?
Click to expand...
Click to collapse
Have you enabled the permissions for storage in app manager?.
Have you encrypted the folder?.
Have you tried developer settings and enabling root?.
I have no idea why you've changed from stock to a custom rom. That's like trading money for dust..
Beamed in by telepathy.
Just rooted my Verizon galaxy S4. Pain in the ars compared to the Droids that I've had for the past 6 years. Maybe just different.Not really interested in changing out Rom, but really need to have tether. I have unlimited and use about 16 gbs per month for business. I know that there's a thread on xda for tehter, but its somewhat old and can't see anyone that's used it or applied it for the MK2 build. Have tried numerous WiFi apps on market and none work. Also the.the thread on xda is somewhat over my head. Anything else out there. Hows this, since I don't do this for a living and don't have the patience to do the tether package ...theres 50.00 bucks to help me get tether and to understand it a little better. Use to change the entitlement on the droids and had tether, but the process on the galaxy is stumping me. let me know
http://forum.xda-developers.com/showthread.php?t=2512981
This thread is updated for MK2. Relatively simple as the primary method is to simply copy and paste in a root explorer.
MK2 tether
AdelosMeansUnknown said:
http://forum.xda-developers.com/showthread.php?t=2512981
This thread is updated for MK2. Relatively simple as the primary method is to simply copy and paste in a root explorer.
Click to expand...
Click to collapse
This is the part that's beyond me. I know it must be frustrating to deal with us out here, but any and all help is very much appreciated.
1.Download the modded framework-res.apk from here for MJ7 or here for MK2 then copy it to /system first then change framework-res.apk's permissions to rw-r--r-- (chmod 644) and then MOVE it to /system/framework and overwrite framework-res.apk. Then reboot and you should have tethering!
Do I do a direct download to the phone? or or to desktop and than to system. and so on. again any help is appreciated This is why I go to YouTube and have a 8th grader show me how to do it. Kind of embarrassing for a guy that's in his fifties. But than again my work and what I do for a living is beyond allot of people...Thanks
truckerd said:
Just rooted my Verizon galaxy S4. Pain in the ars compared to the Droids that I've had for the past 6 years. Maybe just different.Not really interested in changing out Rom, but really need to have tether. I have unlimited and use about 16 gbs per month for business. I know that there's a thread on xda for tehter, but its somewhat old and can't see anyone that's used it or applied it for the MK2 build. Have tried numerous WiFi apps on market and none work. Also the.the thread on xda is somewhat over my head. Anything else out there. Hows this, since I don't do this for a living and don't have the patience to do the tether package ...theres 50.00 bucks to help me get tether and to understand it a little better. Use to change the entitlement on the droids and had tether, but the process on the galaxy is stumping me. let me know
Click to expand...
Click to collapse
I also have unlimited. Have you tried using PDAnet+? When I upgraded from 4.2.2 MKD to 4.3 MK2 my Foxfi app quit working and then I tried PDAnet+ and it works like a charm.
Sent from my SCH-I545 using Tapatalk
tether pdanet
Terri M said:
I also have unlimited. Have you tried using PDAnet+? When I upgraded from 4.2.2 MKD to 4.3 MK2 my Foxfi app quit working and then I tried PDAnet+ and it works like a charm.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Have used PdaNet in the past. Cant get it to work on this build...Weird
I'm on MK2 with Surge's tether. I found it much easier to unpack the zip on my desktop and move the files to the root of my external SdCard. Once you have all four files in the folder on your external SdCard, download Terminal Emulator to your phone from the play store, open it and type in the commands letter for letter (double check your spelling and spacing). The script runs, the phone reboots, and voila tether works through the hotspot app no problem.
---------- Post added at 05:47 PM ---------- Previous post was at 05:07 PM ----------
In addition if you use the script through Terminal Emulator you have a nice way to return to stock - just type in the commands for the untether script.
I had to undo the tether to accept the OTA from MJ7 to MK2. However, the next OTA should be kitkat, so who knows if this will even be an issue or if we'll still be able to tether this way.
Question on the root on the sd card..Do I make a file, no file on in E'S file mgr.
Sent from my SCH-I545 using xda app-developers app
truckerd said:
This is the part that's beyond me. I know it must be frustrating to deal with us out here, but any and all help is very much appreciated.
1.Download the modded framework-res.apk from here for MJ7 or here for MK2 then copy it to /system first then change framework-res.apk's permissions to rw-r--r-- (chmod 644) and then MOVE it to /system/framework and overwrite framework-res.apk. Then reboot and you should have tethering!
Do I do a direct download to the phone? or or to desktop and than to system. and so on. again any help is appreciated This is why I go to YouTube and have a 8th grader show me how to do it. Kind of embarrassing for a guy that's in his fifties. But than again my work and what I do for a living is beyond allot of people...Thanks
Click to expand...
Click to collapse
I'd say it doesn't really matter how the file (frameworks-res.apk) gets to the root of your SD card. From there, using a file manager (I usually use File Manager, be sure to check root explorer and system write in the settings) locate where ever you placed the file, highlight it by pressing and holding, there should be an option to copy the file. Select that. Press home (which brings you to the root of your SD card), then press the "Up" button (which essentially begins accessing system files) until you can see the system folder. Paste here. Press and hold the file again and select "Permissions." Check The read and write of the first row, and read only of the next two rows. Move the file. Navigate to the framework folder and drop and overwrite. Reboot.
I use wanam xposed and xposed. There's an option to turn off tethering provisioning their.
Sent from my Nexus 7 using Tapatalk
AdelosMeansUnknown said:
I'd say it doesn't really matter how the file (frameworks-res.apk) gets to the root of your SD card. From there, using a file manager (I usually use File Manager, be sure to check root explorer and system write in the settings) locate where ever you placed the file, highlight it by pressing and holding, there should be an option to copy the file. Select that. Press home (which brings you to the root of your SD card), then press the "Up" button (which essentially begins accessing system files) until you can see the system folder. Paste here. Press and hold the file again and select "Permissions." Check The read and write of the first row, and read only of the next two rows. Move the file. Navigate to the framework folder and drop and overwrite. Reboot.
Click to expand...
Click to collapse
Just to double check where Im putting this file.. Theirs one[ sys file] and one[ system] in Devise, I did check the root explorer but couldn't find system write in the settings.
truckerd said:
Just to double check where Im putting this file.. Theirs one[ sys file] and one[ system] in Devise, I did check the root explorer but couldn't find system write in the settings.
Click to expand...
Click to collapse
The system file. If there is one (depends on file manager used) it should be the option below the root explorer option.
Which file mgr. do you suggest?
Sent from my SCH-I545 using xda app-developers app
AdelosMeansUnknown said:
I'd say it doesn't really matter how the file (frameworks-res.apk) gets to the root of your SD card. From there, using a file manager (I usually use File Manager, be sure to check root explorer and system write in the settings) locate where ever you placed the file, highlight it by pressing and holding, there should be an option to copy the file. Select that. Press home (which brings you to the root of your SD card), then press the "Up" button (which essentially begins accessing system files) until you can see the system folder. Paste here. Press and hold the file again and select "Permissions." Check The read and write of the first row, and read only of the next two rows. Move the file. Navigate to the framework folder and drop and overwrite. Reboot.
Click to expand...
Click to collapse
That's a great explanation.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Here is a .zip where you can flash all your apps in one fell swoop.
This is not my work but something Silesh made for me. I don't think he will mind me sharing it.
I use it all the time and it saves me tons of time not having to install my apps manually.
All you need is WinZip
Just put all your apk files into the data/app folder
and flash away.
What I do is flash the rom and fully boot it first,
then I go back into recovery and flash this .zip.
Boom, all my apps installed. Very nice!
I put just one apk in there. Clean Brower, just so it will work and I can post it here.
Another trick is, using Root Explorer on you phone, just copy your data/app folder from your rom
Then replace that app folder in this .zip and all your apps will be in there.
The advantage to doing this is even when you update or add new apps your apps from the playstore or other, the updated apks will end up in this flashable .zip.
Just make sure when using WinZip when you "add files" and add the app folder you drag it into the data folder. (first delete the app folder that is already in there.)
Again all credit goes to Silesh
Just thought I'd share this.
..
Thanks :good:
Nice to have. Thanks for sharing.
Very good!
Thanks for you. It really works.
Please, can you show, how I can use your zip for another devices? May be for I9000?
faorekh said:
Thanks for you. It really works.
Please, can you show, how I can use your zip for another devices? May be for I9000?
Click to expand...
Click to collapse
It should work on other devices the same.
It flashes all your apps to data/app folder which is used on any Android device.
Obviously not for windows or apple.
Sent from my GT-I9205 using Tapatalk 2
Hi,
zcink said:
It should work on other devices the same.
It flashes all your apps to data/app folder which is used on any Android device.
Obviously not for windows or apple.
Sent from my GT-I9205 using Tapatalk 2
Click to expand...
Click to collapse
zicnk, maybe you are interested in this app too:
https://play.google.com/store/apps/details?id=zip.me&hl=en
treare said:
Hi,
zicnk, maybe you are interested in this app too:
https://play.google.com/store/apps/details?id=zip.me&hl=en
Click to expand...
Click to collapse
Yes thanks.
I have a couple other apps that create flashable zips
But none work as good as the script Silesh has made.
One has an aroma installer but it also has alot of bugs.
Copying my data/app folder into Silesh's .zip works flawless for me.
Sent from Smoke Signals
Aroma Installer
Here is an apk that basically does the same thing.
You can use it to backup and reflash all your apks in recovery at the same time.
This one uses an aroma installer which is nice because you can check or uncheck only the apps you want to install.
It will also do system apps.
Not my work. Had this kicking around from a older phone.
Seems to work fine on the Mega.
Just sharing.
Sent from Smoke Signals
YOU HOLD MYSELF AND XDA FREE FROM ANY LIABILITY. WE ARE NOT RESPONSIBLE FOR YOUR DEVICE. FLASH AT YOUR OWN RISK.
This will enable Native Tether for Build 21.11.21. Shout out goes to @iKrYpToNiTe for his work with this.
Prerequisites:
Droid Maxx/Ultra Rooted w/WP off
METHOD 1: TWRP INSTALL
1) Download the package below labeled "21.11.21tether_twrpinstall".
2) Reboot Into TWRP recovery and navigate to the file for flashing.
3) Reboot
4) Verify tether works
5) Profit.
METHOD 2: MANUAL INSTALL
1) Download the package below labeled "21.11.21tether".
2) Download root browser by Jrummy from the play store
3) Navigate to System/Priv-App and rename VZWEntitlementservice.apk to VzwEntitlementservice.apk.bak.
4) Navigate to System and rename the build.prop to build.prop.bak
5) Place the package on the root of your sd card and extract the build.prop file within the folder.
6) Navigate to system and Copy and paste the new file.
7) Set permissions for the file to
Owner: Read/Write
Group: Read
Others: Read
This should show (rw-r--r--)
8) Reboot. Verify tether works
9) Profit.
REVERTING
METHOD 1:
If installed in twrp, download the package below labeled 21.11.21tether_revert. Flash in Twrp, reboot, verify subscription check re-enabled.
METHOD 2:
If manually installed, simply delete the build.prop you installed, remove the .bak extension from the original build.prop, verify permissions, reboot.
there is nothing in the .zip folder?
Kickbut101 said:
there is nothing in the .zip folder?
Click to expand...
Click to collapse
Are you asking or stating? If you are stating, then you may have gotten a bad download. I just re-verified the download and all is well. The file is very small.
Works perfectly. Thanks!
After reboot, original build.prop is back and the vzw files dropped the .bak. I am rooted, but not unlocked so wp is on, and I guess native tether is not gonna work. Didn't try it before reboot though.
Sent from my XT1080 using XDA Free mobile app
socobandit said:
After reboot, original build.prop is back and the vzw files dropped the .bak. I am rooted, but not unlocked so wp is on, and I guess native tether is not gonna work. Didn't try it before reboot though.
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
Product of wp being on. You can try to open my build.prop and copy and paste the entire prop into your file effectively replacing the contents. See if that takes.
What is a native tether exploit used for?
Sent from my XT1080 using XDA Free mobile app
johnny567 said:
What is a native tether exploit used for?
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
To enable native tether, obviously. Search is your friend.
---------- Post added at 06:04 PM ---------- Previous post was at 05:56 PM ----------
@Topsnake, is it possible to rig your previous MOD ([MOD][ROOT]Native Wireless Tether for build 19.6.3) for 4.4.4?
It appears that having a modded VZWEntitlementServices.apk which takes care of the native tether and only that is a cleaner solution than modifying the build.prop as the latter is referenced a lot by many processes which, consequently, could lead to far reaching side effects.
BTW, do you know if anyone tried your VZWEntitlementServices.apk on 4.4.4?
CrazyRussianXDA said:
To enable native tether, obviously. Search is your friend.
---------- Post added at 06:04 PM ---------- Previous post was at 05:56 PM ----------
@Topsnake, is it possible to rig your previous MOD ([MOD][ROOT]Native Wireless Tether for build 19.6.3) for 4.4.4?
It appears that having a modded VZWEntitlementServices.apk which takes care of the native tether and only that is a cleaner solution than modifying the build.prop as the latter is referenced a lot by many processes which, consequently, could lead to far reaching side effects.
BTW, do you know if anyone tried your VZWEntitlementServices.apk on 4.4.4?
Click to expand...
Click to collapse
Thought I replied to this.
The 19.5.3 would probably work for 4.4.4 but I haven't tried it.
The build.prop is a much cleaner install when done correctly.
Topsnake said:
Thought I replied to this.
The 19.5.3 would probably work for 4.4.4 but I haven't tried it.
The build.prop is a much cleaner install when done correctly.
Click to expand...
Click to collapse
@Topsnake can you please elaborate on the changes you made to the stock buiuld.prop file?
I know you've mentioned in another thread that your method and the one using EntitlementBypass-v1.2.apk (from Moto X forum) are using the same commends. Would I be correct assuming that you've:
1. Added net.tethering.noprovisioning=true
and
2. Changed ro.mot.tether_dun_required to 0
Are those are the only difference between your build.prop and the stock one?
The reason I ask, is that, as I said earlier in this thread, build.prop is pretty significant file (from what I understand) and sets a lot of variables and settings. I'm hesitant to modify it in fears that by enabling native tether other unwanted side effects would arise.
Thanks
CrazyRussianXDA said:
@Topsnake can you please elaborate on the changes you made to the stock buiuld.prop file?
I know you've mentioned in another thread that your method and the one using EntitlementBypass-v1.2.apk (from Moto X forum) are using the same commends. Would I be correct assuming that you've:
1. Added net.tethering.noprovisioning=true
and
2. Changed ro.mot.tether_dun_required to 0
Are those are the only difference between your build.prop and the stock one?
The reason I ask, is that, as I said earlier in this thread, build.prop is pretty significant file (from what I understand) and sets a lot of variables and settings. I'm hesitant to modify it in fears that by enabling native tether other unwanted side effects would arise.
Thanks
Click to expand...
Click to collapse
I can guarantee you that this mod will not give any effects other than enabling tether. 110% positive
Topsnake said:
I can guarantee you that this mod will not give any effects other than enabling tether. 110% positive
Click to expand...
Click to collapse
line 259 net.tethering.noprovisioning=true appears to be the only addition to the original build.prop
Should the result should be the same if we just edit the prop.buld right on the device and add that line?
Are you unlocked bl?
Topsnake said:
Are you unlocked bl?
Click to expand...
Click to collapse
yes
CrazyRussianXDA said:
yes
Click to expand...
Click to collapse
So then copy the contents of the build prop into yours or replace it all together. It takes of all about 3 seconds.
It will be the same.
Whelp that's it's for me @NWKENT @Jaocagomez @Caseyk621 @bigv5150 @rmjones2006 i'm done helping this community and dealing with all these people who feel like something is owed to them. It's been fun.
Topsnake, thank you! For all you have done in the past and now.
Sent from my XT1080 using XDA Premium 4 mobile app
rekids said:
Topsnake, thank you! For all you have done in the past and now.
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I appreciate that buddy. Thanks.
CrazyRussianXDA said:
"I'm not required to disclose the details of any mod to you" - this might or might not be true as I'm not familiar with Open Source Licensing and you might be required to disclose. Regardless, you did not, that's part why you came across as not completely honest.
The fact that most developers (Jcase, Faux123, beaups, iKrYpToNiTe, just to name a few) DO disclose everything makes me thank that you might be required to do full disclosure.
"Either apply it, or don't." - I did not. I applied command provided by iKrYpToNiTe
Click to expand...
Click to collapse
If you are really that concerned about the build.prop being altered in a way that you feel the need to be worried, then simply compare your current build.prop to the modified one that topsnake has provided. It's that simple. No need to start arguments about what one person feels is better or safer or whatever else you think; I personally research anything that I do to my phone by tearing down apk's or batch files or whatever it might be that I'm applying to my phone to see what is being done. By doing this it also helps you learn how these exploits work and helps you learn more about your phone in general.
If you're not comfortable with changing files then don't do it. It's that simple.
Not calling any one particular person out in general, but there is so much of the same information continually being repeated that it is extremely frustrating. I'm to the point where I don't even try and help because I'm just repeating what I said a page or two back, or the post directly below.
Topsnake said:
Whelp that's it's for me @NWKENT @Jaocagomez @Caseyk621 @bigv5150 @rmjones2006 i'm done helping this community and dealing with all these people who feel like something is owed to them. It's been fun.
Click to expand...
Click to collapse
Please don't leave us! We appreciate everything you do!
Hey everyone, so i never really post mods or anything, and I'm not sure if this truly constitutes a mod, because it's just a simple copy paste job, but here are all of the files to copy to your V20 in order to have a silent camera and video camera.
**MUST BE ROOTED**
Every noise that's associated with the camera apk will be gone with no flashing of any kind! All you're doing is simply replacing all of the files on your device with the ones in the attached zip file! Your camera will now be completely silent without having to use a modded camera apk or flashing any sort of files in twrp.
(New Method provided by stangdriver. can flash his file Silent_Camera.zip in twrp if you'd rather flash than manually copy/paste!)
Instructions:
1.) Download the attached zip file
2.) Extract and copy all 15 files to system/media/audio/ui. Make sure permissions are set to rw-r-r correctly
3.) Reboot
Alternate Instructions (thanks to stangdriver!)
1.) download Silent_Camera.zip
2.) Flash in TWRP
3.) Reboot to system
done!
Now you've got a completely silent V20 camera! Instructions 1:http://cloud.tapatalk.com/s/593c8892b4fad/V20SilentCameraFiles.zip
Instructions 2:
http://cloud.tapatalk.com/s/593e74f74646c/Silent_Camera.zip
Sent from my LG-US996 using Tapatalk
Not sure if you or maybe users viewing this thread are interested, but I made a zip installer that replaces the files and sets permissions by just flashing in recovery.
These are not my files, just used the donwload from the OP and made a flashable zip.
So users can either use the instructions from above or flash the attachment from below.
If you do the manual way as posted above, make sure and set permissions for the new files to 644 (rw-r--r--)
Good luck and enjoy the silent camera!
good tip, stang! I'll post your file in the op as well!
Sent from my LG-US996 using Tapatalk
so.... anyone try it out? lol
Sent from my LG-US996 using Tapatalk
jayochs said:
so.... anyone try it out? lol
Sent from my LG-US996 using Tapatalk
Click to expand...
Click to collapse
That's right. I am waitng for someone to be first and test it out. Im not good with that and would be not possible to fix it.
netgar said:
That's right. I am waitng for someone to be first and test it out. Im not good with that and would be not possible to fix it.
Click to expand...
Click to collapse
jayochs said:
so.... anyone try it out? lol
Sent from my LG-US996 using Tapatalk
Click to expand...
Click to collapse
Silent zip flashed fine for me, works great. VS995 running latest build of WETA.
Sent from my VS995 using XDA-Developers Legacy app
great to hear!
Sent from my LG-US996 using Tapatalk
It works too in a H990ds. Used the instructions #1
Used Stang's zip file.
Working flawlessly in H990ds.
Thank you.
Zip works great on my h910. Thanks for this.
Mod works great!
Do you know if there is a way to keep music playing while using camera app? (Like Google Camera)
Thank you very much
This also, works for the LG V30. Thanks.
Delete
Works well. Instead of flashing zip, I extact into the ui folder and overwrite all the files. Make copies of original if you want to backup.
Hello what root browser do you use ? i have solid explorer and i have issues
Hello what root browser do you use ? i have solid explorer and i have issues settings the permits i want change the power on, shut down sounds but the solid explorer is not working even with root allowed, so maybe is just my explorer ? or how i set the chmod permission?
stangdriver44 said:
Not sure if you or maybe users viewing this thread are interested, but I made a zip installer that replaces the files and sets permissions by just flashing in recovery.
These are not my files, just used the donwload from the OP and made a flashable zip.
So users can either use the instructions from above or flash the attachment from below.
If you do the manual way as posted above, make sure and set permissions for the new files to 644 (rw-r--r--)
Good luck and enjoy the silent camera!
Click to expand...
Click to collapse