Related
Hi guys I could really do with some help.
I recently purchased 4 Haipai Noble i9220s. 3 of them I have 'upgraded' to the latest firmware found on this thread. However (and luckily), before flashing the last device I noticed that with the firmware from that thread, the SIM functionality is missing - pretty important for a phone! I need then to retrieve the firmware from the one un-flashed phone.
I have tried following the instructions here (I know that's for 65x3 devices, but that's all I could find) to dump the rom but I get stuck. The first file I tried to dump was DSP_BL (assuming, rightly or wrongly, this is the bootloader for the second 'core', ie the one that runs the GSM radio) however the start address is 0x04000 and end address is 0x046023. I make the length, therefore 0x042023. However when putting these figures into the flash tool I get the message "[WARNING] Read back length is adjusted to 512-Bytes alignment" and I am unable to proceed.
I would really appreciate help with this; I need to get the other three devices back into a working state!
Thanks in advance
OK... I managed to find a version of MTK Tools here, which I gather is needed to dump the ROM. I have successfully performed the dump, but when I load the scatter into Flash Tool I get the following error message on both the PRELOADER and the DSP_BL:
BROM ERROR: S_DL_PC_BL_INVALID_GFH_FILE_INFO (5066)
All the other files load fine, but after flashing the dumped firmware to another phone the radio doesn't come back (in fact the phone simply loads up on what appears to be an 'enter your recovery password' screen, but it's in chinese so I can't verify that.
Here's the scatter file, if it's any help...
PRELOADER 0x0
{
}
DSP_BL 0x40000
{
}
MBR 0x600000
{
}
EBR1 0x604000
{
}
__NODL_PMT 0x660000
{
}
__NODL_NVRAM 0xa60000
{
}
__NODL_SECCFG 0xd60000
{
}
UBOOT 0xd80000
{
}
BOOTIMG 0xde0000
{
}
RECOVERY 0x13e0000
{
}
SEC_RO 0x19e0000
{
}
__NODL_MISC 0x1fe0000
{
}
LOGO 0x2040000
{
}
__NODL_EXPDB 0x2340000
{
}
EBR2 0x23e0000
{
}
ANDROID 0x23e4000
{
}
CACHE 0x224e4000
{
}
USRDATA 0x425e4000
{
}
__NODL_FAT 0x626e4000
{
}
__NODL_BMTPOOL 0xffff0050
{
}
Click to expand...
Click to collapse
I just found out that Root & Tools has a button "To prepare blocks for flash tool". Pressing this prepares a flashable firmware which includes the Preloader and DSP_BL. However, reflashing the devices with this firmware does not re-enable the GSM Radio. I noted the following error message when attempting "To prepare blocks for flash tool"
-- preloader_and_dsp: md5 OK; ... it is copied ... cut OK- The signature isn't found! ... File Size Too Small!
-- DSP_BL: md5 OK; ... it is copied ... cut OK
-- MBR: md5 OK; ... it is copied
......
Click to expand...
Click to collapse
any ideas, anybody?
You phone is rooted?
I don't know that phone, but you can look in the build.prop. There is a line that specifies the rild module. Look that the file exists. If is there, try using the one from the original rom.
http://www.kandroid.org/online-pdk/guide/telephony.html
Hi thanks for that but it hasn't worked.
I didn't think it would have, As I say, the firmware, including system image is flash-able to the device, so all the correct files appear to be in place in the file system. I'm guessing it must be something to do with those Preloader and BL images which caused errors when backing up. I'm just at a loss as to what I can do to fix the issue :s
Try this steps to enable GSM Radio
Phone must be rooted.
1. Open Es File Explorer.
2. Go to Setting>Root Setting> and tick all.
3. Go to data/nvram/md/ and delete NVRAM folder. You must successful delete NVRAM folder.
4. Then reboot.
5. Open ZOPO_IMEI then write new imei.
6. Shutdown device, insert SIM and turn on device.
7. Done.
If not successful, repeat again but at step number 3 go to data/ and delete nvram folder.
mtk 6575 rom backup
LairdPleng said:
Hi guys I could really do with some help.
I recently purchased 4 Haipai Noble i9220s. 3 of them I have 'upgraded' to the latest firmware found on this thread. However (and luckily), before flashing the last device I noticed that with the firmware from that thread, the SIM functionality is missing - pretty important for a phone! I need then to retrieve the firmware from the one un-flashed phone.
I have tried following the instructions here (I know that's for 65x3 devices, but that's all I could find) to dump the rom but I get stuck. The first file I tried to dump was DSP_BL (assuming, rightly or wrongly, this is the bootloader for the second 'core', ie the one that runs the GSM radio) however the start address is 0x04000 and end address is 0x046023. I make the length, therefore 0x042023. However when putting these figures into the flash tool I get the message "[WARNING] Read back length is adjusted to 512-Bytes alignment" and I am unable to proceed.
I would really appreciate help with this; I need to get the other three devices back into a working state!
Thanks in advance
Click to expand...
Click to collapse
:good:
Hi,
I successfully rooted and backed up my mtk 6575 hd7 phone with mtk droid tools. Also I made another stock rom back up with rom dump2. Only you need to do the things that install adb and vcom drivers of the phone to your computer.
MT6575 custpack partition (ALCATEL One Touch 5020A/5020E)
Hi everyone!!!
I got my ALCATEL One Touch 5020A and its cool even powered of a single core cpu only. Like other android device user I'd like to use a custom ROM on it but the problem is SP Flash Tool can't Readback the custpack partition. How could I port a ROM on it if this problem occurs?
Please help me guys.... What Flash Tool version should I use to carry out custpack partition? Or any Tool you know to solve my problem.
Your help will highly appreciated.
Thanks.
Hello everybody in XDA!
I created this thread to talk about that phone (which nobody has )
What about rooting?
Does somebody know if bootloader is locked, or unlocked? I tried lots of methods:
DoomLord, SuperOneClick, via Official Recovery... But I couldn't do anything...
I'd like to develop a CM7,CM9 or CM10 for this device, I'm learning how to, but without root I can't get boot.img to get kernel and foundamental stuff to build recovery...
I found out that hardware is really similar (if not equal) to Sony Xperia Tipo and Miro, that have CM10 by FXP...
I discovered that you can acces recovery with volume up and power and FTM mode (IDK what it is) with volume down, home and power
Upppp
Inviato dal mio Smart Chat con Talktapa
Root method working 100% proof on screens :
http://forum.xda-developers.com/showthread.php?t=1714299
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Dumps :
I've dumped what I could from this phone (recovery.img is broken due to my noob failure flashing some other recovery.img from other device) Hope that some of u guys can make something nice with this :
- dump by romdump v82b: http://www.sendspace.com/file/dp3ol4
- dump by dd: boot.img http://www.sendspace.com/file/ehhf3r
Oh and btw if some of u guys have this phone already rooted, be so kind and post here original recovery.img. I'll be more than thankful I've screwed mine ...
j3zzoo said:
Root method working 100% proof on screens :
http://forum.xda-developers.com/showthread.php?t=1714299
Dumps :
I've dumped what I could from this phone (recovery.img is broken due to my noob failure flashing some other recovery.img from other device) Hope that some of u guys can make something nice with this :
- dump by romdump v82b: http://www.sendspace.com/file/dp3ol4
- dump by dd: boot.img http://www.sendspace.com/file/ehhf3r
Oh and btw if some of u guys have this phone already rooted, be so kind and post here original recovery.img. I'll be more than thankful I've screwed mine ...
Click to expand...
Click to collapse
Great! When I have time I'll root and dump recovery.img
Inviato dal mio Smart Chat con Talktapa
... so, any chances that someone can upload original recovery.img here ?
Stock Rom
Hi, i have the ZTE P752D, i have rooted the phone, and i do something wrong with some app (tools apps from the market) and my phone its not starting from android logo.
I don´t have the stock rom, what can i do?
Thanks in advance, an sorry about my poor english.
My history ...
In Steps:
1.-I rooted by ADB with terminal in OSX
2.-Install SU and some utilities...
3.-Unbrand the phone: erasing bootanimation and vodafone apps,
4.-Optimizate: erasing Dalvik cache and others.
5.-And last... i installed "ROM Toolbox" and try to change the icons & theme, but all the apps shutdown and phone too... next my phone don´t start from android logo.
Thats all i do.
But now i have downloaded romdump.zip from this post in this forum, and i believe that i have to create a rom with that... am not sure..
Sorry about my english.
Can somebody help with this?
Edit 1: i tryed Fastboot or adb - but can´t detect any devices..
Kernel 2.3.6...
I found the P752D Kernel 2.3.6... Can use for something?
Have a folder named firmware, but i don´t know how to use it to repair my phone, please, somebody to helpme?
update.zip
Hi Guys, at this point i see nobody interested in help me to solve this, so.. i´ll try to make a new rom from romdump.zip if its posible, in this .zip i have the nexts folders:
-checksum.md5
-config.gz
-system.info.gz
-system.tar
In system.tar i see the root partition system..
How can i use that to create update.zip to use in system recovery?
Changing the update.zip content???
Hey guys,
I have the same problem.
I erased by mistake the file "filer.odex" from the system/app folder.
Deleting this file I pratically erased all the system apps, and now the vodafone bootanimation keep going in loop!
Few days ago I've started preparing all necessary for having an update.zip with Titanium Backup, just in case, but it doesn't work with the stock recovery (ASR 3e), and now i'm looking for an update.zip or some others suggested methods.
I've found this method to create a custom "update.zip" for this mobile in the thread "[TUTORIAL] Create your own UPDATE.ZIP"
so hope that someone can reply me for any suggestions!:fingers-crossed:
Now I have the solution!
For rooting your ZTE9752D , follow my steps . No risk, no computer required .
1. Download poot - debug.apk and Minister
Poot = dropbox.com/s/odgbq448eova7ag/Poot-debug.apk
Click to expand...
Click to collapse
Ministro = play.google.com/store/apps/details?id=org.kde.necessitas.ministro
Click to expand...
Click to collapse
2 . Bookmark in phone settings and enable USB debugging installation of unknown apps.
3 . Minister is already installed , since it was downloaded from the Play Store. So Poot -debug install and open the application.
4 . We say (probably in Spanish , but you may ) that needs some libraries . We give OK ( accept or similar button on the left, so there are no messes . )
5. Once you have downloaded the libraries , click on "Press here to poot " .
6. Then, just click on Get Superuser , and see if you have root.
7. If you are not root , reboot your phone , because sometimes it fails.
This I have found myself, and I 've tried my ZTEP752D Fully rooting. And sorry for my Inglés , but i was using the Google Translate .
JAVI10210 said:
For rooting your ZTE9752D , follow my steps . No risk, no computer required .
1. Download poot - debug.apk and Minister
2 . Bookmark in phone settings and enable USB debugging installation of unknown apps.
3 . Minister is already installed , since it was downloaded from the Play Store. So Poot -debug install and open the application.
4 . We say (probably in Spanish , but you may ) that needs some libraries . We give OK ( accept or similar button on the left, so there are no messes . )
5. Once you have downloaded the libraries , click on "Press here to poot " .
6. Then, just click on Get Superuser , and see if you have root.
7. If you are not root , reboot your phone , because sometimes it fails.
This I have found myself, and I 've tried my ZTEP752D Fully rooting. And sorry for my Inglés , but i was using the Google Translate .
Click to expand...
Click to collapse
Can we unroot with poot?
Inviato dal mio Vodafone Smart Chat con Tapatalk 2
I do not know, but I think so.
JAVI10210 said:
I do not know, but I think so.
Click to expand...
Click to collapse
I did it... No superuser app can update Su and the only one usable in Superuser, from which we can't unroot...
Edit: I managed to install SuperSu.
How I did it? Before I installed Superuser, I updated Su from it, then (without uninstalling Superuser) install Super Su. Open it. You will be asked to update Su binaries. Touch ok, give superuser authorizations to SuperSu, leti it finish. Then, uninstall Superuser.
From SuperSu you can do a complete unroot.
Inviato dal mio Vodafone Smart Chat con Tapatalk 2
vodafone smart chat root
NGENYOKA said:
Hello everybody in XDA!
I created this thread to talk about that phone (which nobody has )
What about rooting?
Does somebody know if bootloader is locked, or unlocked? I tried lots of methods:
DoomLord, SuperOneClick, via Official Recovery... But I couldn't do anything...
I'd like to develop a CM7,CM9 or CM10 for this device, I'm learning how to, but without root I can't get boot.img to get kernel and foundamental stuff to build recovery...
I found out that hardware is really similar (if not equal) to Sony Xperia Tipo and Miro, that have CM10 by FXP...
I discovered that you can acces recovery with volume up and power and FTM mode (IDK what it is) with volume down, home and power
Click to expand...
Click to collapse
hy i root my phone with kingo root wich you can google it and download.
I just bought one of these devices - it is the successor to the ZTE Tureis and ZTE also has the kernel sources available on their website:
http://support.zte.com.cn/support/news/NewsDetail.aspx?newsId=1002222
I already made a successful port of Cyanogenmod 10.2 to the original Tureis and I will start porting this one, as soon as it arrives.
The system.img and recovery.img are in this thread, but the boot.img is not available anymore.
I want to dig through the files to prepare myself while I wait for that thing (have to import it from the UK). Can anyone dump their boot.img and upload it here?
A quick look in the kernel files revealed, that ZTE still calls it Tureis internally. But the boardfile for the device has changed drastically. It looks like they used another display and touchscreen for the Smart Chat and some sensors have changed. But apart from that, the kernel should be recent enough to get it working with Android 4. If not with the stock kernel, maybe after some patches from the ics_chocolate branch on codeaurora.
It will take some time, but I'll do it!
I've successfully ported ClockworkMod 6.0.3.7 to the ZTE P752D. You can check out a tutorial how to flash it here. Now I can seriously start porting Android 4.3.1 over to the device.
Just a quick update:
I'm finally able to get into the Cyanogenmod bootscreen now!
I'm in the process of updating the outdated Gingerbread kernel with KGSL and msm_fb patches (and a lot more things in the process).
I can already start up Cyanogenmod, at least until the Wifi driver crashes and locks up the whole system.
And it only boots if I disable genlock (for now), which is a horrible and whacky solution.
I'm confident that I can give you an alpha version of CM10.2 in the next weeks. If you want to follow my process on github, feel free to do so:
https://github.com/schmatzler/zte-kernel-smartchat
Edit: I was able to stabilize the KGSL core of the kernel. Jellybean drivers for the ZTE N880 work without any crashes now.
The touchscreen doesn't work yet, I have to do some work there now
I made a lot of progress, but now I am stuck So far I managed to get everything working, except Wifi, Camera and Mobile Data.
I can actually connect to a 3G network and I can also make calls and send SMS. But I can't get any APN's to work
I think I narrowed it down to a point in libril where a response with the network parameters gets truncated like this:
Code:
D/use-Rlog/RLOG-RILC( 105): sending RIL_UNSOL_DATA_CALL_LIST_CHANGED
D/use-Rlog/RLOG-RILC( 105): UI <--- RIL_UNSOL_DATA_CALL_LIST_CHANGED (1010) --- RIL [RID 0, Len 640, (null)]
D/use-Rlog/RLOG-RILC( 105): [UNSL]< UNSOL_DATA_CALL_LIST_CHANGED {[status=0,cid=0,up,rmnet0,10.203.58.126,212.23.115.150 212.23.115.132,10.203.58.125],[status=0,cid=1,up,rmnet0,10.203.58.126,212.23.115.150 212.23.115.132,10.203.58.125],[status=0,cid=2,up,rmnet0,10.203.58.126,212.23.115.150 212.23.115.132,10.203.58.125],[status=0,cid=3,down,(null),(null),(null),(null)],[status=0,cid=4,down,(null),(null),(null),(null)],[status=0,cid=5,down,(null),(null),(null),(null)],[status=0,cid=6,down,(null),(null),(null),(null)],[status=0,cid=7,down,(null),(null),(null),(null)],[status=0,cid=8,down,(null),(null),(null),(null)],[status=0,cid=9,down,(null),(null),(null),(null)],[status=0,cid=10,down,(null),(null),(null),(null)],[status=0,cid=11,down,(null),(null),(null),(null)],[status=0,cid=12,down,(null),(null),(null),(null)],[status=0,cid=13,down,(null),(null),(null),(null)],[status=0,cid=14,down,(null),(null),(null),(null)],[status=0,cid=15,down,(null),(null),(null),(null)],[status=0,cid=16,down,(null),(null),(null),(null)],[status=0,cid=17,down,(
D/use-Rlog/RLOG-RILC( 105): qcril_data_unsol_call_list_changed: EXIT with succ
D/use-Rlog/RLOG-RILC( 105): qcril_data_event_hdlr: EXIT with suc
D/use-Rlog/RLOG-RILC( 105): qcril_event_main(): Waiting...
V/use-Rlog/RLOG-RILC( 105): processWakeupCallback
D/RILJ ( 665): [0160]< SETUP_DATA_CALL DataCallResponse: {version=6 status=0 retry=2 cid=2 active=0 type=' ifname='null' addresses=[] dnses=[] gateways=[]}
D/RILJ ( 665): responseDataCallList ver=6 num=20
E/RILJ ( 665): Exception processing unsol response: 1010Exception:java.lang.RuntimeException: getDataCallResponse, no ifname
I think the list in UNSOL_DATA_CALL_LIST_CHANGED is so long that it's not closed properly at the end and cannot be parsed by RILJ. That causes RILJ to believe that the network interface is null instead of rmnet0 and breaks the data connection.
My head burns, I have to get some rest, leave it for the time being and get back at it later...
Hi all,
a little late to the party, but I' ve released CM10.2 for the device. You can find it here:
http://schmatzler.de/en/2015/07/10/...3-1-fuer-das-zte-p752dvodafone-smartchat-865/
Hi everyone, i'm from Brazil, and i need a liitle help.
This week, i bought a chinese tab, Foston FS-M787S, but it comes with a lot of chinese apps and without root, with this tutorial: http://forum.xda-developers.com/showthread.php?t=2343531&highlight=gt811+inverted i installed Cyanogenmod 10 in it. But the touchscreen don't work, when i applied the patch, the touchscreen is inverted. Searching in the web, i found a app called "Android Tablet Touch Solution - by RTO-TEAM", and i tried options from 1 to 5, to found the right option, the display driver of this tablet is gt811. when i run the option 6, all scripts don't work, but the last script "updating boot image" is ok. after this, the tablet don't pass from foston screen (the first screen that appears when it start up), don't enter in recovery, just stop in this screen. Please help me!!!! The only option that work (to recognize in pc, not as removable storage or debug) is when i press 'home' button and reset button (not power). But nothing happens! Help me please!!!
OBS: I make a backup of the factory rom with clockworkmod, but is in internal storage of tablet
Help me to found a way to reinstall the factory system and unbrick the tablet!!!! Please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tablet Specs:
Chipset: Allwinner A13
CPU: ARM Cortex-A8 1.2GHz
GPU: ARM Mali-400MP
Screen: 854x480 7.0" LCD with 5 point Multitouch
Camera: VGA Camera, 5.0MPx Camera with VGA Recording
Factory Operating System Android 4.0.4
Cyanogenmod patches used, and listed in 'lsmod' on factory rom
Touchscreen: GT811
G-sensor: mma7660
Camera: sp0838
platinumlayer said:
Hi everyone, i'm from Brazil, and i need a liitle help.
This week, i bought a chinese tab, Foston FS-M787S, but it comes with a lot of chinese apps and without root, with this tutorial: http://forum.xda-developers.com/showthread.php?t=2343531&highlight=gt811+inverted i installed Cyanogenmod 10 in it. But the touchscreen don't work, when i applied the patch, the touchscreen is inverted. Searching in the web, i found a app called "Android Tablet Touch Solution - by RTO-TEAM", and i tried options from 1 to 5, to found the right option, the display driver of this tablet is gt811. when i run the option 6, all scripts don't work, but the last script "updating boot image" is ok. after this, the tablet don't pass from foston screen (the first screen that appears when it start up), don't enter in recovery, just stop in this screen. Please help me!!!! The only option that work (to recognize in pc, not as removable storage or debug) is when i press 'home' button and reset button (not power). But nothing happens! Help me please!!!
OBS: I make a backup of the factory rom with clockworkmod, but is in internal storage of tablet
Help me to found a way to reinstall the factory system and unbrick the tablet!!!! Please
Tablet Specs:
Chipset: Allwinner A13
CPU: ARM Cortex-A8 1.2GHz
GPU: ARM Mali-400MP
Screen: 854x480 7.0" LCD with 5 point Multitouch
Camera: VGA Camera, 5.0MPx Camera with VGA Recording
Factory Operating System Android 4.0.4
Cyanogenmod patches used, and listed in 'lsmod' on factory rom
Touchscreen: GT811
G-sensor: mma7660
Camera: sp0838
Click to expand...
Click to collapse
Friends .
First I would like to congratulate you for the initiative to install the rom in JLB foston FS - M787S .
Well I had problems with my FS - M787s , I needed to install your rom , because by the firmware of my problems , I could not do a backup .
Acquire another FS - M787S , with original Rom working perfectly , plus the accelerometer chip is different . Is mma 7660 and standing with his rom is DMAR06 .
Good not see the problem , unfortunately most of the battery which is with Rom Jely BEAN 4.1.1 , warms the A13 chip and drains the battery very fast .
I made a backup of the original rom FS - M787S which is working perfectly , via ClockworkMod .
More to try to make the recovery of this backup original rom in Rom FS - M787S with JB , the finalikzar the restore and boot , it boots up more FOSTON lock the screen after the video of the car on the highway .
I opened the two FSM- 787s . The only difference is the chip accelerometer that in FS - M787 rom with original model MMA7660 , and the other is DMAR06 .
I would love to be able to leave the two with the original rom foston .
Are there other ways to make an image or backup that can actually restore the Tablet ?
thank you
Wilton said:
Friends .
First I would like to congratulate you for the initiative to install the rom in JLB foston FS - M787S .
Well I had problems with my FS - M787s , I needed to install your rom , because by the firmware of my problems , I could not do a backup .
Acquire another FS - M787S , with original Rom working perfectly , plus the accelerometer chip is different . Is mma 7660 and standing with his rom is DMAR06 .
Good not see the problem , unfortunately most of the battery which is with Rom Jely BEAN 4.1.1 , warms the A13 chip and drains the battery very fast .
I made a backup of the original rom FS - M787S which is working perfectly , via ClockworkMod .
More to try to make the recovery of this backup original rom in Rom FS - M787S with JB , the finalikzar the restore and boot , it boots up more FOSTON lock the screen after the video of the car on the highway .
I opened the two FSM- 787s . The only difference is the chip accelerometer that in FS - M787 rom with original model MMA7660 , and the other is DMAR06 .
I would love to be able to leave the two with the original rom foston .
Are there other ways to make an image or backup that can actually restore the Tablet ?
thank you
Click to expand...
Click to collapse
Hey buddy, i am from brazil too
Did you solved this problem?
I have one tablet of this in my home and i would try to change its rom
Hi all, I have a D101 10.1in phablet that I bricked.
I do have a backup for SP flash Tool but when I try to boot, I get to the splash screen with Decrypt failed, Boot Error!!!
I bricked by using files from another tablet files same model because get error after busy box installation and try a clean installation
I have tried formatting it... and put my old backup just to fix the problem but after the 1 situation get "Decrypt failed, Boot Error!!!"
When I format it. It seems to work because there is nothing at all when I try to boot it.
When I flash the backup I get the splash screen again... (So it's alive... well barely)
here are the details of the phablet:
- MODEL : d101
- MANUFACTURER : alps
- VERSION : 4.2.2 > JELLYBEAN
- PRODUCT NAME : d101
- DISPLAY ID : ALPS.JB3.MP.V1
- BOARD : d101
- MTK PLATFORM : MT6572
- BUILD ID : JDQ39
- BUILD VERSION : vCC01C
- PDA : vCC01C
- UDISK LABEL : vCC01C
- SERIAL NO. : 0123456789ABCDEF
In the Attach Files i give you guys the boot.img lk.bin logo.bin preloader.bin recovery.img secro.bin uboot.img and MT6572_Android_scatter.txt
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
oficial info
pecifications:
General
Operating System - Android 4.2
CPU - MT Cortex A7 Dual-Core
Processor Speed - 1.2GHz
RAM - 1G
Hard Drive Capacity - 8GB
Extended Memory - Support external TF card extend up to 32GB
Gravity Sensor - Yes, 4-dimensional G-sensor
Flash Player - Yes, Support Flash Player 11.0
Click to expand...
Click to collapse
Display
Display Size - 10.1 Inch
Display Technology - Capacitive Touch Screen
Multi-Touch - Yes, 5 points
Display Resolution - 1024 x 600 pixels
Click to expand...
Click to collapse
Camera
Front Camera - 0.3MP
Rear Camera - 2.0MP
Click to expand...
Click to collapse
Connections
Wi-Fi - Yes, Wi-Fi 802.11 b/g/n
3G - Yes, Support external USB 3G modem
GPS - Yes
Bluetooth - Yes, Bluetooth 4.0
Click to expand...
Click to collapse
Telephone - Yes,
2G:GSM850/900/1800/1900MHz
3G:WCDMA850/2100MHz
Click to expand...
Click to collapse
Input/Output Connectors
Ports
1 x Micro USB Interface
1 x Earphone Jack
1 x TF Card Slot
2 x SIM Card Slot
Audio/Video - 3.5mm headphone jack
Built-in stereo loud speaker
Built-in microphone
Battery
Battery Capacity - 4200mAh
Power Adapter
Input 100-240V~50/60HZ / Output 5V 2A
Color - White
Dimensions(L x W x H) - 243 x 165.8 x 10mm
Net Weight - 513g
Accessories
1 x Power Adapter, 1 x OTG Cable
Click to expand...
Click to collapse
You solved this problem? I have the same
Sadly no fix yet
Rebelation said:
Sadly no fix yet
Click to expand...
Click to collapse
I stubbornly looking for a solution to this problem
same problem here
i face the same problem in my XTOUCH PF81 tablet .
lets check some conditions :
what the type of flashing tool you used ?
is the boot file used extension .mpn or .img ??
did you used the correct project number ? (incase of wiselink tool)
1. SP_Flash_Tool_v3.1344.0.212 or SP_Flash_Tool_v3.1316.0.150
2. img
3 How to understand the project number?
Try the wiselink flash tool 4.1 , i think your tablet project number is td710
Where we can Check that project number
check this
Rebelation said:
Where we can Check that project number
Click to expand...
Click to collapse
https://docs.google.com/document/d/1XEl6O7RNls4TzVYieq0ut6IbP19BTEHewvMGaFofw8U/edit?usp=sharing
at the opening of writes (incorrect scatter file format)
Probably need another scatter
muhammad sadiq said:
https://docs.google.com/document/d/1XEl6O7RNls4TzVYieq0ut6IbP19BTEHewvMGaFofw8U/edit?usp=sharing
Click to expand...
Click to collapse
neoxlam said:
at the opening of writes (incorrect scatter file format)
Probably need another scatter
Click to expand...
Click to collapse
just change it from scatter.txt to scatter.sca , and remeber to remove the tick from force high speed , duel core need the full speed option .
wiselink update necessary?
neoxlam said:
wiselink update necessary?
Click to expand...
Click to collapse
no , for me the new version not work , i used 4.1 and didnt accept update , after install its will ask to install drivers update , i think you are already have the preloader drivers so disregard it .
Well that make flash but still the problem did you fix your tab with that flash tool?
Tried in different ways, the error persists
is a great tool but is just to flash nothing more
dont fix the Decrypt failed, Boot Error!!!
I suggested that the need to find a test point on the board. With its aid, you can unlock preloader, but I do not know how to find a test point
Rebelation said:
is a great tool but is just to flash nothing more
dont fix the Decrypt failed, Boot Error!!!
Click to expand...
Click to collapse
im try to flash the boot.img by fastboot command , and its flashed , but when im try the : fastboot erase userdata , its fail due to security reason , i do think this is our problem , system need to be wiped to get boot !!!
muhammad sadiq said:
im try to flash the boot.img by fastboot command , and its flashed , but when im try the : fastboot erase userdata , its fail due to security reason , i do think this is our problem , system need to be wiped to get boot !!!
Click to expand...
Click to collapse
the problem of wipe or not comes when the system start and this is not the problem of "Decrypt failed, Boot Error!!!"
when you have that problem of wipe you get stuck on logo loop and this is not the problem
this is before system starts because he don't recognize charging nothing because dont recognize the nothing
this problem is about decryption system tree is like lost key to decrypt the files and participation´s
imagine like Linux if you encrypt the files of the system with key and if your system loses that key don't recognize so the system you need put key again or format and install again new fresh
all d101 tablets are the same no mather what seller or logo comes on the tab all are the sam matherboard all are fake mtk6582 some come with android 4.4 but also a fake is just clone rom of 4.2 this tablet are great tablets for normal users for us we like root and install all **** and make or own system this tab is s **** because the system comes encrypet when we try do something broken the encrypt system
we have just 4 options
1 Find the point of the encryption point on the bootloaders and make skip that verification
2 find away to get the encryption key and place it again
3 make a new and fresh undecrypt android system installation
4 put this tablet on the trash and buy new one
i agree with the last option
4 put this tablet on the trash and buy new one
hahahahaha:good:
Phone information:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hardware : MT6580
Model : SM-N9500
Build number : MMB29K.G950FXXU1APFO
Build date UTC : 20170831-103530
Android v : 7.0
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Kernel v : 3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Thu Aug 31 18:37:56 CST 2017
Uboot build v : -----
LCD Driver IC : 1-mtk6580_jd9369_v3_dsi_vdo_hsd599_hd1080
Down load
User MtkDroidTools_v253 to get your phone info ------> Download
Use SP Flash Tool v5.1516 -------> Download to Flash new recovery.img
Dowdload TWRP_v3.1.1-0_For_MT6580 for Note 8 mt6580 ----> Download
HOW TO INSTALL:
1. Download recovery
2. Turn off the phone
3. Use Flash Tool v5.1516 and MT6580_Android_scatter.txt chose Download only
4. put capble in to the phone
5. Finish
6. Reboot into recover
Now you can backup and install custom new Rom
7. If you want root use Kingroot
Any one have backup or stock this rom pl post to this toppic.
need you help to flash rom Note8 clone
i am looking for help my to flash rom note8 clone i try to do with your post is not working for me pls i need help
Hi i need help!!!!
i brought a clone (KK concept) has excellent full screen display quality and its a perfect clone. but I tried to flash TWRP and got it bricked, status> Dosent turn on, if I plug in battery dosent show any red light, but if I connect it to computer= I hear connecting...4 seconds...and disconnecting SOUNDS ONLY...can I get a stock rom of this model...in cpu z it shows processor as Quad and mt6595.
*Before flashing TWRP*
when I dial *#*#789789#*#* a menu pops up with a list of options one is showing >>' processor hide/show '
if I select hide, in CPUz it shows processor as snapdragon 8xx
if I select show, in CPUz it shows processor as mt6595
can I get the stock rom? if anyone can find out..... its been dead for days... literally I paid 5k for it but its as real as the real deal..
if any one knows pls tell me where can I get rom...no negative coments please..
tammyone said:
i am looking for help my to flash rom note8 clone i try to do with your post is not working for me pls i need help
Click to expand...
Click to collapse
can u post backup of your rom please. it would help a ton for me
hi
get it from here
https://izforum.com/firmware/note-n8-sm-n9500-mt6580-s305_n8_hdp_en/
if any one buys this rom
kindly share with us
Good day, IV eu fortunately been a victim of some meone selling a clone as a genuine Note 8. After paying R6k for the fake, I tried to factory reset the phone and it's where everything went wrong. I eventually had to install a rom. Nothing is working and the screen is blank. Can anybody please help me.
Drivers are installed and pick up the phone in SP tools. It continually gives a Dram error. Please help
Opps
Komersaris said:
Good day, IV eu fortunately been a victim of some meone selling a clone as a genuine Note 8. After paying R6k for the fake, I tried to factory reset the phone and it's where everything went wrong. I eventually had to install a rom. Nothing is working and the screen is blank. Can anybody please help me.
Drivers are installed and pick up the phone in SP tools. It continually gives a Dram error. Please help
Click to expand...
Click to collapse
Have you had any luck with this problem yet?
datt37 said:
Phone information:
Hardware : MT6580
Model : SM-N9500
Build number : MMB29K.G950FXXU1APFO
Build date UTC : 20170831-103530
Android v : 7.0
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Kernel v : 3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Thu Aug 31 18:37:56 CST 2017
Uboot build v : -----
LCD Driver IC : 1-mtk6580_jd9369_v3_dsi_vdo_hsd599_hd1080
Down load
User MtkDroidTools_v253 to get your phone info ------> Download
Use SP Flash Tool v5.1516 -------> Download to Flash new recovery.img
Dowdload TWRP_v3.1.1-0_For_MT6580 for Note 8 mt6580 ----> Download
HOW TO INSTALL:
1. Download recovery
2. Turn off the phone
3. Use Flash Tool v5.1516 and MT6580_Android_scatter.txt chose Download only
4. put capble in to the phone
5. Finish
6. Reboot into recover
Now you can backup and install custom new Rom
7. If you want root use Kingroot
Any one have backup or stock this rom pl post to this toppic.
Click to expand...
Click to collapse
Sir can you port a recovery for my mtk6580 Nougat 7.1 version ice phone i555 device? my recovery partition is showing 10mb in Diskinfo but my stock recovery in only 7.15mb. I'm a noob on this. I tried porting and flash many different custom recovery but non of them worked I'm attaching my boot.img, recovery.img, and the scatter file for you to have a look. I'll be really grateful if you do it for me. I was trying to unlock my bootloader with all the method i found on the internet but every time i do so my phone unlocks but when it restarts i go to developer option by tapping 7 times my oem unlocking shows unticked. Can you please help me with that?
datt37 said:
Phone information:
Hardware : MT6580
Model : SM-N9500
Build number : MMB29K.G950FXXU1APFO
Build date UTC : 20170831-103530
Android v : 7.0
Baseband v: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Kernel v : 3.10.0-2828982 ([email protected]) (gcc version 4.8 (GCC) ) #1 SMP Thu Aug 31 18:37:56 CST 2017
Uboot build v : -----
LCD Driver IC : 1-mtk6580_jd9369_v3_dsi_vdo_hsd599_hd1080
Down load
User MtkDroidTools_v253 to get your phone info ------> Download
Use SP Flash Tool v5.1516 -------> Download to Flash new recovery.img
Dowdload TWRP_v3.1.1-0_For_MT6580 for Note 8 mt6580 ----> Download
HOW TO INSTALL:
1. Download recovery
2. Turn off the phone
3. Use Flash Tool v5.1516 and MT6580_Android_scatter.txt chose Download only
4. put capble in to the phone
5. Finish
6. Reboot into recover
Now you can backup and install custom new Rom
7. If you want root use Kingroot
Any one have backup or stock this rom pl post to this toppic.
Click to expand...
Click to collapse
Sir can you port a recovery for my mtk6580 Nougat 7.1 version ice phone i555 device? my recovery partition is showing 10mb in Diskinfo but my stock recovery in only 7.15mb. I'm a noob on this. I tried porting and flash many different custom recovery but non of them worked I'm attaching my boot.img, recovery.img, and the scatter file for you to have a look. I'll be really grateful if you do it for me. I was trying to unlock my bootloader with all the method i found on the internet but every time i do so my phone unlocks but when it restarts i go to developer option by tapping 7 times my oem unlocking shows unticked. Can you please help me with that?
every time i try to flash recovery it gives me an error: PMT changed for the ROM; it must be downloaded. how can i fix it?
---------- Post added at 02:18 PM ---------- Previous post was at 01:22 PM ----------
there is a rom that can be flashed with SPFT?
i'm looking for a i8100_MB_V1.1 Firmware, i can't find anithing about it
---------- Post added at 03:23 PM ---------- Previous post was at 03:21 PM ----------
if anybody can upload his rom it would be very appreciated, even stock, i need my phone to boot up
---------- Post added at 04:13 PM ---------- Previous post was at 03:23 PM ----------
LegendSteve said:
Have you had any luck with this problem yet?
Click to expand...
Click to collapse
same problem here, anybody can help?
Kushal G said:
i brought a clone (KK concept) has excellent full screen display quality and its a perfect clone. but I tried to flash TWRP and got it bricked, status> Dosent turn on, if I plug in battery dosent show any red light, but if I connect it to computer= I hear connecting...4 seconds...and disconnecting SOUNDS ONLY...can I get a stock rom of this model...in cpu z it shows processor as Quad and mt6595.
*Before flashing TWRP*
when I dial *#*#789789#*#* a menu pops up with a list of options one is showing >>' processor hide/show '
if I select hide, in CPUz it shows processor as snapdragon 8xx
if I select show, in CPUz it shows processor as mt6595
can I get the stock rom? if anyone can find out..... its been dead for days... literally I paid 5k for it but its as real as the real deal..
if any one knows pls tell me where can I get rom...no negative coments please..
Click to expand...
Click to collapse
same thing, please help
the only rom that i found is this :
MT6580__samsung__SM-N9500__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55 ( https://www.gsm1x.xyz/2018/07/rom-samsung-sm-n9500-mt6580.html )
but it says "not enough storage". if i remove the userdata thick it flashes but the screen stays gray i'm literally desperate xD
Edit: apparently the gray screen is due to a display driver failure, i need a "ILI9881D-2" compatible rom
Edit2: the phone boots but the screen stays gray. touch works (i hear sound of touches)
i made a thread, please reply https://forum.xda-developers.com/android/help/galaxy-note-8-clone-problem-t3841461
use the attached scatter file, save the attached preloader_hct6580_weg_a_l.bin and recovery.img to the same folder as your rom folder.
I see no scatter file attached :/
Kushal G said:
can u post backup of your rom please. it would help a ton for me
Click to expand...
Click to collapse
Do you still need help or find a way out....???
Any one knows how to update the kernel on this Device ?
does this root method work? i wanted to try but seems like everyone having problems.
Please can this recovery be used for ths clone device?
SM_G950 hero2qltezc. device is rooted.
model: SM-G950
device version: 7.0
device CPU: MT6580
Kernel version: 3.10.0.2828982
Thesame baseband with yours also
Thanks