Signal drop out issues - Please help - Sony Xperia Z Ultra

Good day all!
I've been experiencing some issues since I got my C6806 3 weeks ago. I live in Toronto and my provider is Rogers. The phone itself is unlocked and is just running the stock software which is 4.2.2, build # 14.1.B.2.257
Ever since I got the phone I've had a periodic issue where the phone signal strength will just completely die out to 0 bars, then it'll come back to full bars about 30 seconds later. It happens whether I'm home or out on the road. It happens if I'm using LTE bands or 3G or HSPA. It also happens whether I've got wifi on or off.
Any troubleshooting steps you could suggest?
Thanks in advance!

vivftp said:
Good day all!
I've been experiencing some issues since I got my C6806 3 weeks ago. I live in Toronto and my provider is Rogers. The phone itself is unlocked and is just running the stock software which is 4.2.2, build # 14.1.B.2.257
Ever since I got the phone I've had a periodic issue where the phone signal strength will just completely die out to 0 bars, then it'll come back to full bars about 30 seconds later. It happens whether I'm home or out on the road. It happens if I'm using LTE bands or 3G or HSPA. It also happens whether I've got wifi on or off.
Any troubleshooting steps you could suggest?
Thanks in advance!
Click to expand...
Click to collapse
has it always happened?
Have you got stamina mode on? Turn stamina mode off and see if it stops..

hamdogg said:
has it always happened?
Have you got stamina mode on? Turn stamina mode off and see if it stops..
Click to expand...
Click to collapse
It seems to happen on a frequent basis. At least a couple of times a day when I happen to be paying attention to my phone.
I've never actually used stamina mode, and it's always been off.

How's LTE and HSPA where you are? If the signal is poor it'll switch over to the next thing on ladder. If you have a poor LTE signal it'll jump down to HSPA, and if you have a poor signal on that one it'll jump down to EDGE. It's the same dance if you walk into an area where there is good LTE coverage. It jump up from EDGE or HSPA to LTE, and iin all cases when it switches, you'll notice a couple of seconds where it connects to the new frequency (by having zero signal). That's why I disable LTE when I know I'm going to be in an area with poor LTE signal for a long period of time.
Not saying that this is your problem, but try only using EDGE for a couple of hours and see if it happens again.
Sent from my C6833 using Tapatalk

LordManhattan said:
How's LTE and HSPA where you are? If the signal is poor it'll switch over to the next thing on ladder. If you have a poor LTE signal it'll jump down to HSPA, and if you have a poor signal on that one it'll jump down to EDGE. It's the same dance if you walk into an area where there is good LTE coverage. It jump up from EDGE or HSPA to LTE, and iin all cases when it switches, you'll notice a couple of seconds where it connects to the new frequency (by having zero signal). That's why I disable LTE when I know I'm going to be in an area with poor LTE signal for a long period of time.
Not saying that this is your problem, but try only using EDGE for a couple of hours and see if it happens again.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
LTE and HSPA coverage by Rogers in Toronto is great overall. I don't really use the LTE APN because it seems to suck up battery life immensely. I just keep it in the normal APN that seems to switch randomly between HSPA and 3G. The issue can occur if I'm just sitting still in a spot. I'm using it, and all of a sudden the signal just cuts out for about 30 seconds and comes back. Both before and after the incident I am usually at full bars.
I'm unsure of what EDGE is. The only things I control are the APNs I obtained from Rogers - one is just the standard one that gives me 3G and HSPA, and the other is LTE.
Dunno what else I can really do. I doubt it's my provider so it's gotta be the phone. Any other real troubleshooting steps to try, or should I just get this to Sony?

:good:
vivftp said:
LTE and HSPA coverage by Rogers in Toronto is great overall. I don't really use the LTE APN because it seems to suck up battery life immensely. I just keep it in the normal APN that seems to switch randomly between HSPA and 3G. The issue can occur if I'm just sitting still in a spot. I'm using it, and all of a sudden the signal just cuts out for about 30 seconds and comes back. Both before and after the incident I am usually at full bars.
I'm unsure of what EDGE is. The only things I control are the APNs I obtained from Rogers - one is just the standard one that gives me 3G and HSPA, and the other is LTE.
Dunno what else I can really do. I doubt it's my provider so it's gotta be the phone. Any other real troubleshooting steps to try, or should I just get this to Sony?
Click to expand...
Click to collapse
EDGE is 2G. so turn off LTE and HSPA+ and see if it does it.
I don't have the LTE equipped phone so I'm not sure if these hardware functions will switch on and off randomly.
It sounds like your hardware is switching between 4g and 3g. problem is that both wont work simultaneously, so you would get this drop off. solution is that build prop edit i gave you.
But then you'd have 4g on all the time. so if you don't want that then turn it off manually.
Try these.
Edit your build.prop file.
(do you know how to do this??)
and insert these.
___________
ro.ril.hsxpa=3
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=20
ro.ril.hsupa.category=7
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
______________
that will stop hardware switching between 2g/3g/4g
as well as make it faster.

Settings->More...->Mobile Networks->Network Mode->GSM Only
You'll still have mobile data, but it will be SLOW. I think the top speed is around 400KB/sec, but you'll only use this to check if your signal is more stable without 3G/4G.
Tip: If you want to save battery and you aren't the type that uses a lot of mobile data, use EDGE (the thing i'm currently writing about). 4G uses a lot of juice.

LordManhattan said:
Settings->More...->Mobile Networks->Network Mode->GSM Only
You'll still have mobile data, but it will be SLOW. I think the top speed is around 400KB/sec, but you'll only use this to check if your signal is more stable without 3G/4G.
Tip: If you want to save battery and you aren't the type that uses a lot of mobile data, use EDGE (the thing i'm currently writing about). 4G uses a lot of juice.
Click to expand...
Click to collapse
Thanks. Just made the change and will keep an eye on it over the next day or two.

Just gotta say holy crap this Edge thing is SO slow. Even just loading icons on Google Plus or Youtube searches takes forever. A mobile speed test is showing about 133 kbps...
Damn... gotta come up with a better solution that doesn't require having slow as shyte data access
I'm trying WCDMA only to see how this might work. At least the speeds are more tolerable there.

vivftp said:
Just gotta say holy crap this Edge thing is SO slow. Even just loading icons on Google Plus or Youtube searches takes forever. A mobile speed test is showing about 133 kbps...
Damn... gotta come up with a better solution that doesn't require having slow as shyte data access
I'm trying WCDMA only to see how this might work. At least the speeds are more tolerable there.
Click to expand...
Click to collapse
Yeah, but keep using it for now. You're only checking if the signal drops while your on it, so I'm not saying that you should keep using it. It's only for a couple of hours. You can do it!
Sent from my C6833 using Tapatalk

LordManhattan said:
Yeah, but keep using it for now. You're only checking if the signal drops while your on it, so I'm not saying that you should keep using it. It's only for a couple of hours. You can do it!
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
*sigh* I'll try
lol
EDIT. Nevermind the part below. I just kept trying more SMS apps until I settled upon GO SMS and it seems to finally be able to load photos. Damned weird the default one wouldn't do it
On another note, can anyone explain why the built in Messaging app has issues both sending and recieving photos? Plus there're a few instances where it says I've got a message, but I've viewed them all. I've even tried downloading a few other messaging apps from the Play store, and they can't seem to view or send photos either. Damned weird if you ask me.

vivftp said:
*sigh* I'll try
lol
EDIT. Nevermind the part below. I just kept trying more SMS apps until I settled upon GO SMS and it seems to finally be able to load photos. Damned weird the default one wouldn't do it
On another note, can anyone explain why the built in Messaging app has issues both sending and recieving photos? Plus there're a few instances where it says I've got a message, but I've viewed them all. I've even tried downloading a few other messaging apps from the Play store, and they can't seem to view or send photos either. Damned weird if you ask me.
Click to expand...
Click to collapse
I'm not using the stock messaging app. I'm using Hangouts as my main SMS app, but I didn't have any issues with it when I used it. The Android 4.3 update is released now, so you can update to it through PC Companion? Note that this will remove root and stuff like if you're rooted. If not, go ahead.
Sent from my C6833 using Tapatalk

LordManhattan said:
I'm not using the stock messaging app. I'm using Hangouts as my main SMS app, but I didn't have any issues with it when I used it. The Android 4.3 update is released now, so you can update to it through PC Companion? Note that this will remove root and stuff like if you're rooted. If not, go ahead.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Sorry to bump an old thread, but I just want to say that I'm having the exact same issue. I thought it might have occurred after I installed a custom room but I'm now back on stock and still experiencing 4 bars immediately dropping to no service and then going back to 3 or 4 bars before slowly dropping back to zero. I figured it could be LTE, so I experimented with all settings under mobile networks to no avail. I try the same Sim in my note 2 in the same location and I have no issues. I believe this is an issue with the antenna or a general hardware fault. My phone is the c6806, originally on Bell but being used on Telus. I have already contacted Sony but they are giving me the runaround
Anyone know how the warranty is handled in Canada? Anyone else have this problem?

Signal issues
Sorry I'm restarting this thread one more time.. But anyone figure out a fix? I'm having the same problem on a brand new phone... I had the same phone before I lost it. Got it again but these signal dropping issues now . Never had these on my previous cc6806

Related

losing data when data switches between LTE and 3G

I've been having this problem probably once a day since I've gotten the phone where my phone will lose data signal while switching between 3G and LTE and the only way to get data back is to restart the phone. Turning airplane mode on and off won't work either.
Ive had that issue too..but most of the time it switches back n forth no problem
bik2101 said:
I've been having this problem probably once a day since I've gotten the phone where my phone will lose data signal while switching between 3G and LTE and the only way to get data back is to restart the phone. Turning airplane mode on and off won't work either.
Click to expand...
Click to collapse
Sent from my ADR6425LVW using XDA App
I haven't noticed any data problems until today. I am unable to connect to 3G. We do not have 4G in my area.
These problems are probably bugs in the LTE System.
Sent from my Galaxy Tab 10.1
jbh00jh said:
These problems are probably bugs in the LTE System.
Sent from my Galaxy Tab 10.1
Click to expand...
Click to collapse
why should bugs in the LTE system affect 3G?
the 3G our phones use is not exactly the same as standard 3G unless you force your phone into EVDO 3G via the ##778 menu. which if you are not in a 4g zone I would recommend simply for stability. The 3G our phones use is basically a layer between 3G and LTE as I've had it explained to me.. I really don't know much else about it though, sorry. I'm sure someone else here can shine more light on it however.
racingtiger03 said:
the 3G our phones use is not exactly the same as standard 3G unless you force your phone into EVDO 3G via the ##778 menu. which if you are not in a 4g zone I would recommend simply for stability. The 3G our phones use is basically a layer between 3G and LTE as I've had it explained to me.. I really don't know much else about it though, sorry. I'm sure someone else here can shine more light on it however.
Click to expand...
Click to collapse
oh that's really interesting. thanks for that little bit of info. had no idea.
Same problem with it dropping data signal and never coming back without restart. At least now i know its not a hardware issue
I've had the same problem lately
~John
damn.. i was actually hoping this was a small problem with a simple solution... everything else about the phone is perfect except for this one problem.
Having the same issue here....when switching to cdma I get no 3G just 1X.....hope they find a fix soon
Sent from my HTC Rezound
same here guys. call Verizon and let them know. I think it helps if a bunch of us make them aware.
I've had a ton of weird data issues with the Rezound. I get 1x where i should get 3g, i get 3g where i should get 4g and i get nothing way too often.
I've only had this happen once with the rezound. Shows nothing but bars, no data can be used. Sometimes switching to 3g or 4g in lte on/off helps.
Had this problem intermittently on both my wife's and my bolts, completely agree its just a lte being a new tech issue.
I've listened to a podcast on how the handoff works and its definitely not fool proof.
racingtiger03 said:
the 3G our phones use is not exactly the same as standard 3G unless you force your phone into EVDO 3G via the ##778 menu. which if you are not in a 4g zone I would recommend simply for stability. The 3G our phones use is basically a layer between 3G and LTE as I've had it explained to me.. I really don't know much else about it though, sorry. I'm sure someone else here can shine more light on it however.
Click to expand...
Click to collapse
Im in Lawton Oklahoma and I'm not gonna c 4G till 2013 and I'll be pcs before that.
Now I access the ##778 menu in edit mode and what do I do to force EVDO 3G?
Rocking and Loving My Unbelievable Crazy ReZound
Dial ##778#, call
edit mode
password is 000000
modem settings
Rev. A
select "enable"
menu > commit
phone will reboot and you should get 3G back
This changes your network from eHRPD back to EVDO Rev.A. For LTE phone owners, eHRPD causes 3G to die (most of the time anyway) when the LTE network has problems. Get back on normal EVDO and you're good to go.
^ from Jntdroid on another forum (not sure if we're allowed to post to other forums here) I'm not positive on where he got it from, but this is a capability of all HTC 4G phones
I've had occasional issues with being down to 1X, but even that was only during nationwide 4G network issues, definitely get in touch with VZW about that... not that they have enough sense to fix anything *sigh*
Data Connection slow to Acquire (3G/LTE)
If I'm on the subway, or somewhere with no service, then come above ground, I get voice (full bars) but no data -- it could take upwards of 3 minutes+ for data to come back up. Any thoughts?
I've been losing my 3G service throughout my city, being restricted to 1x so many times lately where I SHOULD be getting 3G!(4G isnt available in my area yet). It's really annoying...perhaps nexus isnt theeee only one...
^should I try calling and programing what the user implied? Again, I am not in a 4G area...
not2gutta said:
I've been losing my 3G service throughout my city, being restricted to 1x so many times lately where I SHOULD be getting 3G!(4G isnt available in my area yet). It's really annoying...perhaps nexus isnt theeee only one...
^should I try calling and programing what the user implied? Again, I am not in a 4G area...
Click to expand...
Click to collapse
Same issue as you. I live in a 3G area only and my 3G drops out a lot. Even a reboot doesn't get it back. Not sure what to do :/

Why is Edge faster than 3G or H+ (see edit)?

Ever since I've transferred to AT&T I've had laggy data issues. I finally rooted/flashed to AOKP, and while trying to address the issues of no APNs appearing or saving and no signal status in the status bar, I've come to find both AT&T and T-Mobile as Available Networks under some network setting. Am I chasing ghosts here, or is there something actually up?
EDIT: So I really need help troubleshooting the issue. I'll logcat, dump, or whatever necessary. I've been in many cities/areas and this problem persists: if I haven't used data or the phone hasn't been backgrounding traffic, it'll take anywhere from 5 to 30 seconds before a connection is made when I try to access an internet-related function on my phone (even though 3G/H is displayed in the status bar). Out of shear frustration (this has been happening since I got the phone, under stock ROMs and now under AOKP), I tried messing with *#*#info#*#*. I changed WCDMA-preferred to WCDMA-only -- no improvement. Oddly, I also tried GSM-only. Well, great improvement! Even though I only have E, there is absolutely no latency in waiting for a connection -- so pages and other data end up loading faster on Edge than 3G !
I have absolutely no idea why my phone takes forever to make a connection. Under 3G, I see only but a few upstream network activity blips (even under full bars) for as much as 30 seconds, before there is any downstream activity (and when it comes, it comes). Can anyone help???
P.S.: I'm going to try using a friend's SIM later for comparison.
joebobjoe said:
Ever since I've transferred to AT&T I've had laggy data issues. I finally rooted/flashed to AOKP, and while trying to address the issues of no APNs appearing or saving and no signal status in the status bar, I've come to find both AT&T and T-Mobile as Available Networks under some network setting. Am I chasing ghosts here, or is there something actually up?
Click to expand...
Click to collapse
Because they both share the 1900MHz band I believe.
Red5 said:
Because they both share the 1900MHz band I believe.
Click to expand...
Click to collapse
I'd like to know if it shows up for anyone else?
joebobjoe said:
I'd like to know if it shows up for anyone else?
Click to expand...
Click to collapse
On AOKP it does for me too. Just ignore it.
Red5 said:
On AOKP it does for me too. Just ignore it.
Click to expand...
Click to collapse
An aside: does your phone stay on 3G and switch to H only under moderate network traffic?
joebobjoe said:
An aside: does your phone stay on 3G and switch to H only under moderate network traffic?
Click to expand...
Click to collapse
The phone displays 3G because thats what it is... then when data is being processed, it shows H because its using the "what AT&T calls 4G but its really HSPA" side of the network. For just standby time with no data, its going to show 3G because HSDPA is traffic, not standby.
Red5 said:
The phone displays 3G because thats what it is... then when data is being processed, it shows H because its using the "what AT&T calls 4G but its really HSPA" side of the network. For just standby time with no data, its going to show 3G because HSDPA is traffic, not standby.
Click to expand...
Click to collapse
Well that's strange. I'm used to phones displaying what network-level they are capable of. So why would it not just display H for HSPA+ when HSPA+ service is available, instead of only displaying under traffic.
I'm going to go ahead an edit this thread to help troubleshoot what I think to be the main issue.
After some trials I see that the network indicator switches back and forth between 3G and H a few tines before making the connection and transmitting data. Hmmm...
Basically, "4G" will eat your battery alive so the phone idles at 3G and jumps to H+ only when you use data. If you were on a "stock" ATT rom it would always read H+, but this is technically false since when its idle the phone sits in 3G. CM9 and AOKP accurately display it which is why you see the switch.
Sent from my SGH-I777 using Tapatalk
I have a HTC Amaze for a phone and the Galaxy S2 is my media player. Sometimes, when I don't feel like carrying around two devices, I put my T-Mobile SIM in the galaxy and use it as my phone. I must say, Edge is not as slow as I remember it being. Maybe speed is contingent on network traffic. If thats the case, instead of using crowded "faux G" networks, I may defer to Edge to save battery life and get good dl/ul rates.
My phone does the same thing. I noticed it sometime ago. When idle 3g. Internet I get H+. This is with both Shostock2 and Phone Bricker. I was curious to know too but just blew it off because it really doesnt make any difference to me as long as Im getting decent speeds. Im not even with ATT anymore. Went with Straight Talk. Which uses ATT towers. Cant beat the price!!
They don't have the correct apns, but that symbol problem is because the phone doesn't use hspa+ passively, only actively. It causes some lag when downloading, but it is faster fit large data. But your problem is due to a supposed imei range with bad modems. Rehash stick, fix the triangle, and return it.
Sent from my GT-I777 using xda premium

Verizon LTE

Does anyone else have problems with mobile data dropping frequently?
My thunderbolt and rezound act the same. At work, the signal strength reported in the about phone screen fluctuates between -63 & - 73dbm. Ill lose mobile data countless times daily. If you go to the settings to try and toggle mobile data, it's greyed out and says turning on...
So frustrated with this behavior
Ehh I have this problem to a certain extent with the nexus but its not too bad
brucekr said:
Does anyone else have problems with mobile data dropping frequently?
My thunderbolt and rezound act the same. At work, the signal strength reported in the about phone screen fluctuates between -63 & - 73dbm. Ill lose mobile data countless times daily. If you go to the settings to try and toggle mobile data, it's greyed out and says turning on...
So frustrated with this behavior
Click to expand...
Click to collapse
Verizon probably have a weak signal in your work place.
This happens. Also, LTE is known to stop allowing traffic (at random) and require a turning off/on of Mobile Data (especially when using constant data for long periods of time).
It's annoying.
Different places - happens more than others.
I have also been experiencing issue with Verizon data connections as of late. I have a hard time even locking onto 3G with my Rez. But my other phones no issues, I am now on my 4th Rezound in over a month since having this issue.
Jimi Mack said:
I have also been experiencing issue with Verizon data connections as of late. I have a hard time even locking onto 3G with my Rez. But my other phones no issues, I am now on my 4th Rezound in over a month since having this issue.
Click to expand...
Click to collapse
what other phones gets better signal? just wondering?
I have this same issue... What is the problem? Should I get a new rezound?
Its pointless to have LTE if I cant use it......
Its like when it works it works well, but most of the time, it just sits there the data arrows unlit, when i try to use data..
I powercycle, turn mobile data off and on, and sometimes it works, but most of the time Im stuck to using Wi-Fi...
So why should i pay verizon all this money for Wifi?
Ugh.. Im gonna return this pos.
Damasterjj said:
what other phones gets better signal? just wondering?
Click to expand...
Click to collapse
Compared to my unfortunate experience with 4G devices, any of my other 3G phones hold onto and got better locks on 3G than compared to the past Rezounds. Now the latest rezound finally does get a data lock the prior 4 did not.
I've got no 4g issues. Almost never drops. I'm in southern California.
Sent from my rezound
This issue has been addressed a lot in many forums for the rezound, tbolt, gnex, and pretty much every 4g phone out. For some phones its not that bad. I think its software based cause once I rooted and s-off I've never had it happen to me again. The gnex I think they narrowed down to combination of software and hardware issues. I've been running ice roms since I rooted. I've been through 3 replacements, all did it, all had new Sims all new phones (not refurbished).
Here's a post I followed when it was happening to me. I've done lots of research on this and I truley do think its software based (mostly because Verizon won't admit its their network)
Sent from my ADR6425LVW using Tapatalk 2
It's a network. If you have -65 -75 dbm on 1xrtt that doesn't mean you have the same signal strength on lte. LTE signal is different from 1xrtt or evdo. The reason that you lose date quite often is because the LTE signal is very poor in your location especially if you are indoor. to improve LTE signal wilson electronics has very good amplifier, that calls sleek 4g-v get it. It may improve the signal by 20 dbm.
There is a few threads on this and no resolutions. There is some kinda of problem with the network that Verizon isn't owning up to. There is a bunch of forums posting the problem as well, where the 4g just drops off and then comes back on. Prior to the begining of June if my 4g dropped out it would go to 3g. Now the places I had solid 4g I am getting it on and off every minute or so. I went down to verizon and the girl said she is having problems with her Tbolt. We changed out the sim and she said she could get me a new phone but to me it sounds like the network if so many people across all phones are having problems. I am going to call Verizon probably this weekend or monday cause I am tired of being on 3g all the time and not being able to use the 4g is driving me nuts. Things are so slow. Arg.
brucekr said:
Does anyone else have problems with mobile data dropping frequently?
My thunderbolt and rezound act the same. At work, the signal strength reported in the about phone screen fluctuates between -63 & - 73dbm. Ill lose mobile data countless times daily. If you go to the settings to try and toggle mobile data, it's greyed out and says turning on...
So frustrated with this behavior
Click to expand...
Click to collapse
once in a blue moon my signal bar would drop a couple bars even though its been in the same spot for about 5 minutes. but thats about it.
Im stuck on 1x since last night -_-
Try using *#*#4636#*#* and toggle lte on and off. If you absolutely need lte only set to only allow it. I have a good lte signal at work, but it dies quickly once in the building.
Sent from my ADR6425LVW using Tapatalk 2
Took out sim n put it back in...fixed lol. I use that lte on off app to switch to just lte. Thank you though
No drops for me in the Detroit, MI area.
Sent from my ADR6425LVW using xda app-developers app
Gorilla* said:
I have this same issue... What is the problem? Should I get a new rezound?
Its pointless to have LTE if I cant use it......
Its like when it works it works well, but most of the time, it just sits there the data arrows unlit, when i try to use data..
I powercycle, turn mobile data off and on, and sometimes it works, but most of the time Im stuck to using Wi-Fi...
So why should i pay verizon all this money for Wifi?
Ugh.. Im gonna return this pos.
Click to expand...
Click to collapse
Sent from my ADR6425LVW using xda premium
Damasterjj said:
what other phones gets better signal? just wondering?
Click to expand...
Click to collapse
From all the responses, Galaxy S3 is the best signal people are getting to date. Better than the one xxx and the Motorola Razor Maxx. And HTC and Motorola have been known to have the best reception. Go figure.
I won't have my GS3 until July 9th so I can't say first hand.
Sent from my ADR6425LVW using xda premium
drbveb88 said:
From all the responses, Galaxy S3 is the best signal people are getting to date. Better than the one xxx and the Motorola Razor Maxx. And HTC and Motorola have been known to have the best reception. Go figure.
I won't have my GS3 until July 9th so I can't say first hand.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
great I just pre order GS3, r u sure its data signal not gps? cause I found a couple of review that says GS3 has better gps than one X thats all I could find.

How to increase consistency/strength of the phone signal

My phone - I have ICS - S-OFF Amaze with Energy ROM and I had tried to apply blas0id tweaks.
The problem - In certain areas I don't have phone signal for a few minutes, then suddenly it will show 4 bars for a few minutes. In general the signal seems fickle.
Before ICS upgrade, when I had GB, I always had 4 bars in the same places. I *think* I had good signal with ICS before I did blat0id tweaks, but I am not certain of that. (ICS and the tweaks were within a few days)
My wife's Iphone still has excellent signal in those places. Tmobile Mytouch also has excellent signal in the same places. So something has changed on my amaze and not the cell towers.
What I have done so far -
1. went back to stock ICS by flashing the img file. That did not improve the signal. So then got back to energy
2. Tried another ROM - speedrom. No improvement in signal
3. Tried few apps like fresh network. They did not help
Please help me
What can/should I do? I love my amaze, but if I dont get consistent signal, I will have to replace it
Are there any tweaks that I can try?
How about the custom kernels that have been made for ICS recently, would those help?
Is there a way to increase the power to look for and catch on better signal? I can trade battery life for better signal
Thanks
I have same issue but with WiFi only. I never had GB I hope there is a work around
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Found a workaround
This was dumb luck, but when I was trying to play around the app opensignal, it wanted me to set 2G for some of its functionality, since that functionality does not work over 3g. So I went to setup and set Network mode to "GSM Only" from "GSM/WCDMA Auto"
And walla! right after that my signal jumped from 1 bar to 4 bars and has stayed there. I went back to WCDMA and signal dropped, so now I change the network mode only when I need 4G. Its a pain, but at least, the signal is good when I need it.
So with that information, can someone help how I can tweak something to get my 4G and also good signal?
Thanks
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
I would like to kno also but let kno what radio u flash from the ruu
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
I checked the version of my software and I think I already have R2
Build number
2.14.531.3_R2 CL373265 release-keys
So not sure if that would change anything
I have always had this problem as well sometimes I have 4 bars of signal then it drops to the X as in no signal,can't make calls or sends texts until it picks up again, happens totally random don't think it has to do anything with tmobile coverage since I live in the center of Miami. Also most of the time I have 2 bars of signal in most places, I believe it's faulty hardware
Sent from my HTC_Amaze_4G using Tapatalk 2
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
Krazex2005 said:
I have always had this problem as well sometimes I have 4 bars of signal then it drops to the X as in no signal,can't make calls or sends texts until it picks up again, happens totally random don't think it has to do anything with tmobile coverage since I live in the center of Miami. Also most of the time I have 2 bars of signal in most places, I believe it's faulty hardware
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
Krazex .. did you try to set your network mode and see if that helps your signal stick around longer and get better signal? That is working well for me.
I've tried setting my network to GSA and my data speed dropped to 2G.
Sent from my HTC_Amaze_4G using xda premium
soundping said:
I've tried setting my network to GSA and my data speed dropped to 2G.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
yup, that's what this setting is supposed to do, but it increased the quality of my phone signal, that is what I am trying to make better/consistent. Because even after all the bells and whistles, calling someone/receiving the calls is the primary purpose of the phone for me and if that doesn't work, the phone doesn't work for me
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
My amaze won't get 4g in my house whatsoever, only switches to 2g when it feels like it.
Sent from my HTC_Amaze_4G using xda app-developers app
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
A new sim card is a good idea.. so is removing the back cover and cleaning off the contacts with a q-tip and some rubbing alcohol. Taking something and SLIGHTLY bending out each of the gold contacts so they make better contact with the case, making sure there is no debris.
Another thing to look into- there is a TON of hacks for cellphone signal that can be done in build.prop.. playing with those settings is probably a good idea.
The last idea- the signal is actually NOT different. The number of bars it shows you is now just more ACCURATE. You still lose signal in ONLY the exact places you would have before.. but now when your phone would show you as having 1 or 2 bars(on gingerbread) right before you lose all signal, on ICS it shows you as having NO bars because you truly have almost lost the signal. It is VERY accurate, now that I am in an area with bad signal.. I have actually flashed gingerbread again and things did NOT get better, there was just fewer bars that weren't as accurate. But I lost signal in the same spots, and would lost 4g in the same exact spots..
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
RZJZA80 said:
My amaze won't get 4g in my house whatsoever, only switches to 2g when it feels like it.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Guys, OP here. This question/workaround is not about getting 4G. I am getting 4G just fine. Its about the phone signal (the bars). My amaze does not get good phone signal in some areas and when I set the network mode to GSM only (2G), phone signal strength and stability increases. and now I want to figure out how I can keep the setting to 4G and get a good phone signal
Silentbtdeadly said:
A new sim card is a good idea.. so is removing the back cover and cleaning off the contacts with a q-tip and some rubbing alcohol. Taking something and SLIGHTLY bending out each of the gold contacts so they make better contact with the case, making sure there is no debris.
Another thing to look into- there is a TON of hacks for cellphone signal that can be done in build.prop.. playing with those settings is probably a good idea.
The last idea- the signal is actually NOT different. The number of bars it shows you is now just more ACCURATE. You still lose signal in ONLY the exact places you would have before.. but now when your phone would show you as having 1 or 2 bars(on gingerbread) right before you lose all signal, on ICS it shows you as having NO bars because you truly have almost lost the signal. It is VERY accurate, now that I am in an area with bad signal.. I have actually flashed gingerbread again and things did NOT get better, there was just fewer bars that weren't as accurate. But I lost signal in the same spots, and would lost 4g in the same exact spots..
Click to expand...
Click to collapse
Hi SBD, thanks for coming in. I will look into build.prop (ro.ril properties I think) I will also clean any dust inside the phone, may be that will help. The sim card was new when I got my amaze .. but no harm in trying. So I will ask for a new sim card too.
However, in my case, I have a different experience. This is what I did in a weak signal spot.
Have 4G on. I get 0 signal. Can't make a call
go to 2G at the same spot, I get 2-3 bars. I can make a call
I used opensignal app to check signal strength in both cases. with 4G it showed 0. With 2G it showed 42%
Another test. On my route to drop kids off for their day camp, I was on a call (with 4G on) and dropped the call twice (bad reception areas) while going. I switched it to 2G and while coming back did not drop the call.
Before I found this workaround .. people called me and complained that it directly went to voicemail and I never got the call. (no signal). Since I found the workaround, I haven't heard that from anyone.
So I am convinced that there are some real issues in catching the signal with 4G on that get resolved in "2G only" mode. (may be it has to do with the kind of cell towers we have in our area and nothing to do with the phone)
will update if I find more
tnkrer said:
Hi SBD, thanks for coming in. I will look into build.prop (ro.ril properties I think) I will also clean any dust inside the phone, may be that will help.
However, in my case, I have a different experience. This is what I did in a weak signal spot.
Have 4G on. I get 0 signal. Can't make a call
go to 2G at the same spot, I get 2-3 bars. I can make a call
I used opensignal app to check signal strength in both cases. with 4G it showed 0. With 2G it showed 42%
Another test. On my route to drop kids off for their day camp, I was on a call (with 4G on) and dropped the call twice (bad reception areas) while going. I switched it to 2G and while coming back did not drop the call.
Before I found this workaround .. people called me and complained that it directly went to voicemail and I never got the call. (no signal). Since I found the workaround, I haven't heard that from anyone.
So I am convinced that there are some real issues in catching the signal with 4G on that get resolved in "2G only" mode. (may be it has to do with the kind of cell towers we have in our area and nothing to do with the phone)
will update if I find more
Click to expand...
Click to collapse
Yea, it should be lines that have ro.ril that youd eant to change.. and fortunately one of those that you can add(it isn't included by default) will do exactly what you need, default to 2g signal when 4g is too weak. I actually need the same thing, in Jacksonville we have great signal.. except in this new place I moved into. It drains my battery by trying to stay with 4g.. but I don't have time before work to find it.
Look for a tthread by "master&slave" titled something like "super build.prop tweaks" in the vibrant forums, I THINK they had that line.. otherwise google around for something like "build.prop signal tweak" as if it isisn't in that thread, there's a really good one on some other forum.
Also, I remember there being some app that requires root that allows you to toggle between GSM preferred and 2g only.. it changes it at system level, and I don't think it was on the play store, I think it was on Xda.
But yea, I understand your dilemma, and until we get an alternative radio to flash(which I don't forsee), that is the kind of workarounds you need. If you find a reasonable solution make sure to post as it will help me too!
Sent from my nook color until my broke college students azz can afford the new nexus 7 tablet.. if my post from my nook color helped you, you COULD consider a donation..
Found that thread
http://forum.xda-developers.com/showthread.php?t=1151608
and a few others
http://forum.xda-developers.com/showthread.php?t=1227269
http://androinica.com/2009/12/hack-for-rooted-phones-promises-faster-2g3g-speeds/
http://forum.cyanogenmod.com/topic/9781-buildprop-roril-meanings/
I will try to figure out what these different ril properties control and which one to modify .. will report after my experimentation. I haven't found a good comprehensive explanation of all those properties yet.
Glad I'm not the only one...
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
I have had this problem ever since I got my phone in October (right after launch). Updating to ICS didn't help. i've been planning to root and try another ROM, but so far have been skittish as this is my only phone. hasoon, you say it's the SIM card? I am trying the switch to GSM only to see if it makes a difference. My problem is at home - I have terrible service and I live on a mountain with cell phone towers everywhere. My daughter's AT&T and my old AT&T Nokia E71x had excellent service there. I'll let you know if this helps. Maybe a trip to my local t-Mobile store is in order.
It's not the sim card. I noticed on google a lot of people have this problem with htc phones. It's just a bad radio.
Sent from my HTC_Amaze_4G using xda premium
soundping said:
It's not the sim card. I noticed on google a lot of people have this problem with htc phones. It's just a bad radio.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
We know. If you wanna help read my post number 16 or try some of the links he posted in 17.. we just need a decent workaround.

Sprint Data 3g drops

Anyone having issues with 3g data dropping or network always disconnecting, takes a while to connect
Sent from my 0PJA2 using XDA Free mobile app
I had that problem with my sprint m9. Had it for a week with no problem then suddenly no data connect. No 3g or LTE for a couple days. Just Wi-Fi. I took it to a local corporate store and the best tech there eventually swapped out the sim and it's been connecting since. She told me sometimes the cards are bad from the start. Of all the phone's I've had that was a first for me.
Hmmm, mine seemed spotty today. A couple times I showed good 3G or LTE signal, but couldn't get data through.
Toggling airplane mode seemed to help.
mingo2120 said:
Anyone having issues with 3g data dropping or network always disconnecting, takes a while to connect
Sent from my 0PJA2 using XDA Free mobile app
Click to expand...
Click to collapse
so i had the same issue and when i got the new OTA the other day which has a new radio I think the data issues are even worse..
Try a profile update. I activated my phone in a non-sprint area and got really terrible 3g and NO 4g in known LTE saturated areas. Once I returned to my hometown I updated the profile and PRL and I instantly got LTE and the spark logo.
ccs86 said:
Hmmm, mine seemed spotty today. A couple times I showed good 3G or LTE signal, but couldn't get data through.
Toggling airplane mode seemed to help.
Click to expand...
Click to collapse
Yep I've had those issues since day 1. Occasionally the mobile data will disconnect, yet is switched on. Only toggling airplane will fix it.
m03sizlak said:
Yep I've had those issues since day 1. Occasionally the mobile data will disconnect, yet is switched on. Only toggling airplane will fix it.
Click to expand...
Click to collapse
I'm having similar issues.
So far, I tracked it down to this...
If I am on WiFi and then switch off, it will connect to LTE. At that time, some items such as Mail, Facebook, talking to Google, etc. quit working. It just times out. However, I can still browse the web and perform other functions. It will work if I switch back to WiFi or 3G, but so far it appears that I have to restart the phone to get everything working under LTE at that point.
Can others confirm this?
ReproOne said:
I'm having similar issues.
So far, I tracked it down to this...
If I am on WiFi and then switch off, it will connect to LTE. At that time, some items such as Mail, Facebook, talking to Google, etc. quit working. It just times out. However, I can still browse the web and perform other functions. It will work if I switch back to WiFi or 3G, but so far it appears that I have to restart the phone to get everything working under LTE at that point.
Can others confirm this?
Click to expand...
Click to collapse
im having some similar issues. ill lose connectivity on LTE but it wont be disconnected from the LTE network, but switching to 3g or wifi works...ive narrowed it down to when I have a weak LTE signal. My house has always had a weak signal and thats where i notice it the most, I compared with my m8 and the signal levels are the same and connected to the same tower yet the m8 will work while the m9 acts like theres no connection at all, If i go outside and get a slightly better signal the m9 will work great.
2k4mach said:
im having some similar issues. ill lose connectivity on LTE but it wont be disconnected from the LTE network, but switching to 3g or wifi works...ive narrowed it down to when I have a weak LTE signal. My house has always had a weak signal and thats where i notice it the most, I compared with my m8 and the signal levels are the same and connected to the same tower yet the m8 will work while the m9 acts like theres no connection at all, If i go outside and get a slightly better signal the m9 will work great.
Click to expand...
Click to collapse
There is also a discussion about the same issue over on the Sprint Community forum: https://community.sprint.com/baw/thread/204027
I have come across this as well, it's usually when I use more than 4 GB of data over sprints network. I sent a message to sprint telling them their service is shotty at times, never heard anything back yet but haven't run into data connect issues (since then). Also I've heard you can complain about signal strength and if you put in the time (going to supervisor to supervisor) they will send you a device to boost your signal. Or you can just pay for the signal booster device. This is just my opinion and what I have heard, don't quote Bubba
2k4mach said:
im having some similar issues. ill lose connectivity on LTE but it wont be disconnected from the LTE network, but switching to 3g or wifi works...ive narrowed it down to when I have a weak LTE signal. My house has always had a weak signal and thats where i notice it the most, I compared with my m8 and the signal levels are the same and connected to the same tower yet the m8 will work while the m9 acts like theres no connection at all, If i go outside and get a slightly better signal the m9 will work great.
Click to expand...
Click to collapse
my data drops numours times a day and its getting pretty annoying, the phone constantly tells me i have lte but nothing works, browser, facebook, pandora, snapchat. Toggling airplane mode does nothing same with turning mobile data off and back on, sometimes updating the profile will work but man its driving me crazy!
Definitely a radio issue. We need a radio update bc this is killing the battery as well.
BUBBA DUB'S said:
I have come across this as well, it's usually when I use more than 4 GB of data over sprints network. I sent a message to sprint telling them their service is shotty at times, never heard anything back yet but haven't run into data connect issues (since then). Also I've heard you can complain about signal strength and if you put in the time (going to supervisor to supervisor) they will send you a device to boost your signal. Or you can just pay for the signal booster device. This is just my opinion and what I have heard, don't quote Bubba
Click to expand...
Click to collapse
The airave signal booster is 3G and voice, had 1 for 4 years, hasn't worked reliably for the past 2 years and with these issues its not gonna help when the phone is able to get and hold the lte signal.
2k4mach said:
The airave signal booster is 3G and voice, had 1 for 4 years, hasn't worked reliably for the past 2 years and with these issues its not gonna help when the phone is able to get and hold the lte signal.
Click to expand...
Click to collapse
The issue is either hardware related, or possibly a radio handoff issue.
Has anyone swapped phones yet with a newer batch to see if it still occurs?
ReproOne said:
The issue is either hardware related, or possibly a radio handoff issue.
Has anyone swapped phones yet with a newer batch to see if it still occurs?
Click to expand...
Click to collapse
Yup doesn't matter, had a 1st day release and also a 1st day store release. Both have the issue for me.
2k4mach said:
Yup doesn't matter, had a 1st day release and also a 1st day store release. Both have the issue for me.
Click to expand...
Click to collapse
I'm constantly having the issue, and I've been advised to swap for a later release. My local stores are sold out, so I will advise once I have it swapped.
Any other possible solutions?
I did a swap myself and is not a hardware issues, I believe is the radio. I downloaded this signal check app to see what type of network connection is always on. I notice when connected on LTE, I have no problem. When it connects to 3g is where I have the issues especially indoors. It kinda tells me is connected in notification bar, but the network connection is stuck on 1xrtt.
Sent from my 0PJA2 using XDA Free mobile app
mingo2120 said:
I did a swap myself and is not a hardware issues, I believe is the radio. I downloaded this signal check app to see what type of network connection is always on. I notice when connected on LTE, I have no problem. When it connects to 3g is where I have the issues especially indoors. It kinda tells me is connected in notification bar, but the network connection is stuck on 1xrtt.
Sent from my 0PJA2 using XDA Free mobile app
Click to expand...
Click to collapse
My problem, and what I have read from most others is on LTE. It works on 3G and WiFi.
Would this affect Hangouts messages from not coming through? If I'm not on WiFi, I'm on LTE, and message notifications won't come through when off of WiFi. They of course come in fine on WiFi....
It's weird...I was sitting at my desk and my phone was jumping back and forth between Sprint 25 and 41 every few seconds...I did the profile update and now I'm solidly on 25 steady.
I've also seen jumps to Verizon LTE which is sort of my blowing.
Hoping this also solves the issue in a spot near my house that I was dropping data completely where before I at least had a useable 3G signal.

Categories

Resources