I really need a option to root this and I have searched high and low, I can find anything besides Kingo and that failed to root. Can someone please help me? I appreciate any help.
Geek
GeekTechMedia said:
I really need a option to root this and I have searched high and low, I can find anything besides Kingo and that failed to root. Can someone please help me? I appreciate any help.
Geek
Click to expand...
Click to collapse
I'm on the same way, and just got kingo. For now, I think, there's no other way to root it. The SPHL600 is not listed in the Kingo root web site as tested.
Sent from my SPH-L600 using XDA Premium 4 mobile app
Anything on this? Just got my phone today. Not sure I want to try kingo if the l600 isnt listed on supported devices.
Sent from my SPH-L600 using xda premium
Tried this
moosiemooses said:
Anything on this? Just got my phone today. Not sure I want to try kingo if the l600 isnt listed on supported devices.
Sent from my SPH-L600 using xda premium
Click to expand...
Click to collapse
They told me to try this:
http://forum.xda-developers.com/showthread.php?t=2527473
no luck, If you do let me know what you did.
Geek
Kingo works fine, just remember to make sure to do a nandroid backup
cray4phones said:
Kingo works fine, just remember to make sure to do a nandroid backup
Click to expand...
Click to collapse
Before or after rooting?
Sent from my SPH-L600 using xda premium
---------- Post added at 12:35 AM ---------- Previous post was at 12:00 AM ----------
GeekTechMedia said:
They told me to try this:
http://forum.xda-developers.com/showthread.php?t=2527473
no luck, If you do let me know what you did.
Geek
Click to expand...
Click to collapse
How long did it take kingo to install the drivers?
Sent from my SPH-L600 using xda premium
moosiemooses said:
Before or after rooting?
Sent from my SPH-L600 using xda premium
---------- Post added at 12:35 AM ---------- Previous post was at 12:00 AM ----------
How long did it take kingo to install the drivers?
Sent from my SPH-L600 using xda premium
Click to expand...
Click to collapse
Yes AFTER you will be heartbroken if you dont and something goes wrong. Theres not alot of love for this device yet
cray4phones said:
Yes AFTER you will be heartbroken if you dont and something goes wrong. Theres not alot of love for this device yet
Click to expand...
Click to collapse
Ive tried but that method fails. Goes straight to odin mode. The stock recovery doesnt work either.
Sent from my SPH-L600 using xda premium
moosiemooses said:
Ive tried but that method fails. Goes straight to odin mode. The stock recovery doesnt work either.
Sent from my SPH-L600 using xda premium
Click to expand...
Click to collapse
Plug your phone into the computer using the usb and let windows find your drivers. Then make sure (above all) that you have enabled USB degugging. It will always fail if you don't. I use kingo and I have a Sprint Mega as well and it took about 2-3 mins for kingo to root it. I kept it stock because I haven't seen any roms or recovery that I'm sure will work right now but I was able to remove all the crappy bloatware off.
professorfoxx said:
Plug your phone into the computer using the usb and let windows find your drivers. Then make sure (above all) that you have enabled USB degugging. It will always fail if you don't. I use kingo and I have a Sprint Mega as well and it took about 2-3 mins for kingo to root it. I kept it stock because I haven't seen any roms or recovery that I'm sure will work right now but I was able to remove all the crappy bloatware off.
Click to expand...
Click to collapse
Thank you. Ive rooted awhile ago. I just redid the twrp recovery method and it worked. I see there are roms out for other variants of the 6.3. Just wonder if any will work for ours.
Sent from my SPH-L600 using xda premium
moosiemooses said:
Thank you. Ive rooted awhile ago. I just redid the twrp recovery method and it worked. I see there are roms out for other variants of the 6.3. Just wonder if any will work for ours.
Sent from my SPH-L600 using xda premium
Click to expand...
Click to collapse
I see a lot out there too but I'm leery on trying any out only because I use this phone as my daily driver and can't mess it up right now. I might dedicate some time this weekend to trying out CM11. I'll let you know if it works.
professorfoxx said:
I see a lot out there too but I'm leery on trying any out only because I use this phone as my daily driver and can't mess it up right now. I might dedicate some time this weekend to trying out CM11. I'll let you know if it works.
Click to expand...
Click to collapse
Just tried slimkat. Failed... I think they all will. If you have any luck let me know.
Sent from my SPH-L600 using xda premium
Cm11 failed as well as aokp. Think we're boned until someone or us ports for our device.
Sent from my SPH-L600 using xda premium
Kingo Root SUCKS....does nothing but an endless cycle of checking root status and rebooting my phone. There HAS to be a better solution!
waltm78 said:
Kingo Root SUCKS....does nothing but an endless cycle of checking root status and rebooting my phone. There HAS to be a better solution!
Click to expand...
Click to collapse
Is your version MK1?
Sent from my SPH-L600 using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SPH-L600 using Tapatalk
waltm78 said:
Sent from my SPH-L600 using Tapatalk
Click to expand...
Click to collapse
I tried Kingo on the update as well. Didn't work. I Odin back to MK1 then rerooted.
Sent from my SPH-L600 using xda premium
Is there an Odin root method?
Sent from my SPH-L600 using Tapatalk
waltm78 said:
Is there an Odin root method?
Sent from my SPH-L600 using Tapatalk
Click to expand...
Click to collapse
I'm not aware of one for that version. Kingo updates pretty often so I'm waiting.
Sent from my SPH-L600 using xda premium
Ok so I have to Odin back to MK1. Is there a rooted tar file for it or just the two step process
Sent from my SPH-L600 using Tapatalk
Related
Bricked my phone. I tried to put the stock att kernal on while ics was running. stupid thing to do. I can get it into download mode and odin recognizes it. Need help thanks.
Just flash the odin one click ICS .exe file again.
Should work?
Sent from my SAMSUNG-SGH-I717 using XDA
corey_r said:
Bricked my phone. I tried to put the stock att kernal on while ics was running. stupid thing to do. I can get it into download mode and odin recognizes it. Need help thanks.
Click to expand...
Click to collapse
maybe you can try to flash back to stock odin. hope it helps
http://forum.xda-developers.com/showthread.php?t=1506330
I am curious what exactly happened here... did you install the ICS leaked odin one click .exe or just a ROM from the dev section?
What did you do to brick it? What stock kernel did you try to flash exactly?
Thanks!
I think he was trying to flash the GB kernel on the ICS build.
Why do people use the term brick so loosely? Just reflash back using the Odin one click or flash another rom using cwm.
Sent via tapatalk using the Samsung Galaxy Note
HarmonyFlame said:
Why do people use the term brick so loosely? Just reflash back using the Odin one click or flash another rom using cwm.
Sent via tapatalk using the Samsung Galaxy Note
Click to expand...
Click to collapse
I think soft brick should just be boot loop and hard brick is no life or boot error.
Sent from my SAMSUNG-SGH-I717 using xda premium
slowpc said:
I think he was trying to flash the GB kernel on the ICS build.
Click to expand...
Click to collapse
Yes that's exactly what happened. How can i get off ics? Its nice but way to laggy.
Sent from my SAMSUNG-SGH-I717 using XDA
corey_r said:
Yes that's exactly what happened. How can i get off ics? Its nice but way to laggy.
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
You have to flash a stock gingerbread ROM, not just the kernel. Or you could use a nandroid backup if you have one in clockwork mod.
Were do i find one?
Sent from my SAMSUNG-SGH-I717 using XDA
http://forum.xda-developers.com/showthread.php?t=1506330
get download.rar file
unzip it, it has .tar file, flash it via odin.
it will take you back to stock.
HarmonyFlame said:
Why do people use the term brick so loosely? Just reflash back using the Odin one click or flash another rom using cwm.
Sent via tapatalk using the Samsung Galaxy Note
Click to expand...
Click to collapse
+1 on that. A bricked phone means dead, no more, buh bye!
Sent from my Galaxy Note (SGH-i717) using XDA Premium.
gotshoaib said:
http://forum.xda-developers.com/showthread.php?t=1506330
get download.rar file
unzip it, it has .tar file, flash it via odin.
it will take you back to stock.
Click to expand...
Click to collapse
That's what caused my problem in the first place
Sent from my SAMSUNG-SGH-I717 using XDA
HarmonyFlame said:
Why do people use the term brick so loosely? Just reflash back using the Odin one click or flash another rom using cwm.
Sent via tapatalk using the Samsung Galaxy Note
Click to expand...
Click to collapse
PeartFan40 said:
+1 on that. A bricked phone means dead, no more, buh bye!
Sent from my Galaxy Note (SGH-i717) using XDA Premium.
Click to expand...
Click to collapse
Sorry to hear of your trouble, but +1 on the term..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No such thing as a soft brick... A Brick is a Brick
gotshoaib said:
http://forum.xda-developers.com/showthread.php?t=1506330
get download.rar file
unzip it, it has .tar file, flash it via odin.
it will take you back to stock.
Click to expand...
Click to collapse
how do i unzip it?
corey_r said:
Were do i find one?
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1504999
Download the tar file and flash with Odin.
Sent from my SAMSUNG-SGH-I717 using XDA
Still stuck in ics
Sent from my SAMSUNG-SGH-I717 using XDA
Just had to...
-Once you go NOTE, you'd say 4 inches a Joke
soft brick
Sent from my SAMSUNG-SGH-I717 using XDA
If Odin can recognize it, then its not bricked!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To: Install IML74K.UCLD3 for SGH-I717
Warning: This will wipe your data entirely. BriefMobile is not liable for your actions. This is for the SGH-I717 only!
Download SGH-I717UCLD3-1FB30D08F1D2B2AAAECF49D262E8E707.exe
Install the Galaxy Note drivers
Run the "SGH-I717UCLD3-1FB30D08F1D2B2AAAECF49D262E8E707.exe" on a Windows PC
Power off the Galaxy Note
Put the Galaxy Note into "Download Mode" by holding both Volume Down and the Power Button
Connect the Galaxy Note to your computer. Ensure Odin recognizes it. You should see "0:[COM#]" fill in the first box.
Click "Start"
After it is finished, the Galaxy Note will reboot and it will be running Android 4.0.3 IML74K.UCLD3. Congratulations!
This doesn't belong in the Development section.
Korey_Nicholson said:
Warning: This will wipe your data entirely. BriefMobile is not liable for your actions. This is for the SGH-I717 only!
Download SGH-I717UCLD3-1FB30D08F1D2B2AAAECF49D262E8E707.exe
Install the Galaxy Note drivers
Run the "SGH-I717UCLD3-1FB30D08F1D2B2AAAECF49D262E8E707.exe"
Power off the Galaxy Note
Put the Galaxy Note into "Download Mode" by holding both Volume Down and the Power Button
Connect the Galaxy Note to your computer. Ensure Odin recognizes it. You should see "0:[COM#]" fill in the first box.
Click "Start"
After it is finished, the Galaxy Note will reboot and it will be running Android 4.0.3 IML74K.UCLD3. Congratulations!
Click to expand...
Click to collapse
What do u mean by run it? On phone or PC?
Sent from the TermiNOTEr!
borijess said:
What do u mean by run it? On phone or PC?
Sent from the TermiNOTEr!
Click to expand...
Click to collapse
Ftfy
Korey_Nicholson said:
Ftfy
Click to expand...
Click to collapse
Wtf?
Sent from the TermiNOTEr!
Anybody try this out yet? And, is this Note-specific software present and functional?
I hope you got permission to put it here! By the way if you don't wanna get flamed u should request mod to put ur thread in General! Or else
Is it ganna move the root on my galaxy note ?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
up and rooted! Very nice!!!!
just flash it via Odin as this is a one click. After that use Odin to flash CWM and then run the counter clear zip and SU zip for ICS - good to go!!
borijess said:
Wtf?
Sent from the TermiNOTEr!
Click to expand...
Click to collapse
Fixed that for you.
Sent from my SPH-D710 using xda premium
khajah said:
Is it ganna move the root on my galaxy note ?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Yes it will but you can easily reroot by flashing cwm
Sent from my SPH-D710 using xda premium
Is this rom stable?
Sent from my SAMSUNG-SGH-I717 using XDA
hegemytouch said:
Is this rom stable?
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
From the link page:
"The previously leak was version UCLC5. The following build is UCLD3. This is a major bug fix build, so there are no new features. Those who are testing this build out say it’s smoother than ever, although Instagram still doesn’t work. Without further ado, use the guide below to flash the new leak onto your SGH-I717."
Cool.. new leak :-D getting closer to official... then kernel sources and we even have init.d injection from another member... things are getting juicy personally waiting on a CWM version/ROM by a known dev using this base before I test drive it. Neat none the less and glad cwm/root are attainable without modification after Odin.
Sent from my SAMSUNG-SGH-I717 using xda premium
Whosdaman said:
Yes it will but you can easily reroot by flashing cwm
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Doesn't one need to be rooted to flash cwm?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Nice...one more thing does the spen work? And if im running a custom rom to i have to go back to stock then flash this rom?
Sent from my SAMSUNG-SGH-I717 using XDA
tdamocles said:
Doesn't one need to be rooted to flash cwm?
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Flash cwm through Odin then flash su and super user through cwm
Sent from my SPH-D710 using xda premium
hegemytouch said:
Nice...one more thing does the spen work? And if im running a custom rom to i have to go back to stock then flash this rom?
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Yes and no
Sent from my SPH-D710 using xda premium
I got cwm installed through odin but having a hard time finding a zip for su and super user
jdphilly said:
I got cwm installed through odin but having a hard time finding a zip for su and super user
Click to expand...
Click to collapse
http://androidsu.com/superuser/
Hello, i have tried to reset binary count with triangle away and it didnt work. Tried with siyah 1.5.3, cf kernels and didnt reset. After i reset with triangle away it shows that binary count is 0 but after reboot it goes always for 1. Also i have reached binary count-3, have reset, after reboot it shows still 1. Also i got little red note of exclamation while s3 is booting up. So wtf could it be? thx for any help
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wow red exclamation? Never heard of that. Btw did you tried the latest version. The the latest is 1.9.5 afaik
《swagged from aokp》
Why are you trying to reset it?? Only reset it if you're planning on sending your phone for repair, if not don't play around with it because you can brick your device, I've not seen it happen but it is possible!
Sent from my GT-I9300 using xda premium
speedyjay said:
Why are you trying to reset it?? Only reset it if you're planning on sending your phone for repair, if not don't play around with it because you can brick your device, I've not seen it happen but it is possible!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i wanted to reset not because of playing within, just to be safe. Here picture
speedyjay said:
Why are you trying to reset it?? Only reset it if you're planning on sending your phone for repair, if not don't play around with it because you can brick your device, I've not seen it happen but it is possible!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I don't think it's possible and also haven't heard any brick stories so far.
@edin
Try the same from a fresh stock rom
《swagged from aokp》
bala_gamer said:
I don't think it's possible and also haven't heard any brick stories so far.
@edin
Try the same from a fresh stock rom
《swagged from aokp》
Click to expand...
Click to collapse
Course its possible bud, that's why it gives you warnings before you continue, so obviously chainfire has experienced it lol
Sent from my GT-I9300 using xda premium
---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ----------
EdgaBimbam said:
i wanted to reset not because of playing within, just to be safe. Here picture
Click to expand...
Click to collapse
Does your phone boot??
Sent from my GT-I9300 using xda premium
speedyjay said:
Course its possible bud, that's why it gives you warnings before you continue, so obviously chainfire has experienced it lol
Sent from my GT-I9300 using xda premium
---------- Post added at 01:53 PM ---------- Previous post was at 01:52 PM ----------
Does your phone boot??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
lol yeh, flashing everyday roms, doing restores, flashed stock firmware, still that red **** note.
EdgaBimbam said:
lol yeh, flashing everyday roms, doing restores, flashed stock firmware, still that red **** note.
Click to expand...
Click to collapse
Well resetting the flash counter flashes the bootloader so I can only assume its something to do with that
Sent from my GT-I9300 using xda premium
speedyjay said:
Well resetting the flash counter flashes the bootloader so I can only assume its something to do with that
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
maybe i have locked bootloader? or is it impossible?
EdgaBimbam said:
maybe i have locked bootloader? or is it impossible?
Click to expand...
Click to collapse
ERM....try flashing a different ROM, if you can then your bootloader is still unlocked, if you can't get to recovery then you've locked your bootloader....let me know buddy
Sent from my GT-I9300 using xda premium
speedyjay said:
ERM....try flashing a different ROM, if you can then your bootloader is still unlocked, if you can't get to recovery then you've locked your bootloader....let me know buddy
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
flashed stock odexed 2 times, criskelo, omega, wanam roms and still that red exlamation mark. I can access cwm without any problems,all functions are working, but binary count is always 1, i can reach 5 or more, reset with triangle away but still it will show 1
You may want to consult Chainfire, but i have an idea, flash stock ROM via Odin and check update bootloader, but double check with a senior developer first as I don't want to be responsible for a bricked device. Have you tried flashing with Odin?? Without bootloader update?? And starting again??
Sent from my GT-I9300 using xda premium
speedyjay said:
You may want to consult Chainfire, but i have an idea, flash stock ROM via Odin and check update bootloader, but double check with a senior developer first as I don't want to be responsible for a bricked device. Have you tried flashing with Odin?? Without bootloader update?? And starting again??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
i flash stock firmwares only via pc odin. I download .tar file from sammobile, download mode, put .tar file at pda and then flashing. But it cant be locked bootloader, i couldnt be able to use cwm i think.
EdgaBimbam said:
i flash stock firmwares only via pc odin. I download .tar file from sammobile, download mode, put .tar file at pda and then flashing. But it cant be locked bootloader, i couldnt be able to use cwm i think.
Click to expand...
Click to collapse
That's true, and its only been their since using TriangleAway??
Sent from my GT-I9300 using xda premium
speedyjay said:
That's true, and its only been their since using TriangleAway??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
like i remember, i tried to flash this version firmware I9300ZNBLH3, got error at pc odin then flashed lh1 and i think that red mark appeared. Cant say exactly. But before was reseting binary count with triangle away without problems
EdgaBimbam said:
like i remember, i tried to flash this version firmware I9300ZNBLH3, got error at pc odin then flashed lh1 and i think that red mark appeared. Cant say exactly. But before was reseting binary count with triangle away without problems
Click to expand...
Click to collapse
OK and have you tried flashing stock ICS, and returning the phone to an 'out of the box' state?? I think most S3's came with LG8 so try that
Sent from my GT-I9300 using xda premium
speedyjay said:
OK and have you tried flashing stock ICS, and returning the phone to an 'out of the box' state?? I think most S3's came with LG8 so try that
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yeh, i have flashed stock ics by my region, still that issue persisted. I will try to pm chainfire for this strange issue.
I think you've done something quite bad!! Just done a bit of digging....ZNBLH3 is for china (dual core model) presuming you have the quad core right??
Sent from my GT-I9300 using xda premium
speedyjay said:
I think you've done something quite bad!! Just done a bit of digging....ZNBLH3 is for china (dual core model) presuming you have the quad core right??
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
nah, it was for i9300 model and i didnt success in flashing it. Got error at pc odin, and flashed stock LH1 firmware.
atleast i'm able to flash everything, sucks that if i will need to take phone to samsung service, it will be without warranty
All models are I9300 mate (American, far east, Asian and European) all the same model, as Lithuania is in Europe, you should be flashing i9300XXLH3 not ZNBLH3, that's for china! Download I9300XXLH3 and try flashing that!
Sent from my GT-I9300 using xda premium
Code:
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
By using the rom you agree with the above terms!
Instructions:
Download firmware
Download Odin 3.07
Boot into download. (either hold power and volume down or do adb reboot download)
Click on PDA and then find Pre_Rooted_P5210XXUAMG6_P5210OXXAMG3.tar.md5
MAKE SURE RE-PARTITION IS NOT CHECKED!!! You will have an instant brick! You have been warned.
Click start and wait.
once done it will reboot into (stock) recovery and finish installing.
Once done and booted just open SuperSU and update the binary. Not by CWM but the other.
Done!!
I do not have a Tab 3 10.1, so let me know if this works please. I'll post a untouched copy of the firmware also.
Odin 3.07 - http://www.androidfilehost.com/?fid=23060877490002273
Pre_Rooted_P5210XXUAMG6_P5210OXXAMG3.tar.md5 - Still In Testing
Original Firmware - http://www.androidfilehost.com/?fid=23060877490002437 Or you can go to http://www.sammobile.com/firmwares/ and search for your firmware there.
Have Fun!!!
Wooohoooo finally! Thanks alot!
Sent from my GT-P5210 using xda app-developers app
imagelost said:
Wooohoooo finally! Thanks alot!
Sent from my GT-P5210 using xda app-developers app
Click to expand...
Click to collapse
So does that mean that you flashed it and it works??? I hope!!! Woot!!
Not yet! Downloading now. Im on DSL, so it wont be till the a.m till I am able to try. Its 930pm here. I WILL let you know! Thanks again!
Sent from my GT-P5210 using xda app-developers app
imagelost said:
Not yet! Downloading now. Im on DSL, so it wont be till the a.m till I am able to try. Its 930pm here. I WILL let you know! Thanks again!
Sent from my GT-P5210 using xda app-developers app
Click to expand...
Click to collapse
Kewl man.......I'll patently wait The SM-T211 worked first shot :Fingers Crossed: Thanks!!!
Zidkijah said:
Kewl man.......I'll patently wait The SM-T211 worked first shot :Fingers Crossed: Thanks!!!
Click to expand...
Click to collapse
Sorry the inform you but Super user binary update installation failed I reboot the device and try again no luck
Thanks for try my friend
:silly:
I wonder if I missed setting the permissions correctly........ I'll roll up another.......
Sent from my SM-T210R using XDA Premium 4 mobile app
Zidkijah said:
I wonder if I missed setting the permissions correctly........ I'll roll up another.......
Sent from my SM-T210R using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanx I guess I will try tomarrow
:good:
I'll download tonight and give a look. Great work man :thumbup:
Sent from my GT-P5210 using xda app-developers app
Zidkijah said:
I wonder if I missed setting the permissions correctly........ I'll roll up another.......
Sent from my SM-T210R using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Looks like it's still not working SU is in xbin but I'm not able to get super user access at all. Just thinking out loud here and I'm not sure if this is a possibililty or not but was the SU you used an updated version with x86 support? The reason I'm thinking that may be the problem is that when I try to run SU in Terminal I'm getting a Segmentation fault error.
I'm also thinking that when I ./simg2img system.img newsys.img there was an issue...... because the new image blew up to 2.5Gigs.......... Might try a different firmware this time................ I also just downloaded the updated su package. There are some other files in this tarball that has something to do with the update....... still digging
------------------------------------------------------ Update---------------------------------------------------------------------
I found /lib/arm digging around......... That leads me to believe that the su and Superuser.apk need to be built by the android arm tool-chain, I downloaded the most up to date binary and apk ....... Post a test link once uploaded.....
Zidkijah said:
I'm also thinking that when I ./simg2img system.img newsys.img there was an issue...... because the new image blew up to 2.5Gigs.......... Might try a different firmware this time................ I also just downloaded the updated su package. There are some other files in this tarball that has something to do with the update....... still digging
------------------------------------------------------ Update---------------------------------------------------------------------
I found /lib/arm digging around......... That leads me to believe that the su and Superuser.apk need to be built by the android arm tool-chain, I downloaded the most up to date binary and apk ....... Post a test link once uploaded.....
Click to expand...
Click to collapse
I tried to inject 4 different types of SU binary, but no luck - all programs telling that device rooted, but no write access to system folder. Simg2img works without any errors for me.
If anyone need, i can upload unpacked original GalaxyTab 3 10.1 recovery image for more experiments.
Crap, I hope it doesn't have anything to do with that permission folder I came across........ I think it was all java.
Test pack - http://www.androidfilehost.com/?fid=23060877490002706
Sent from my SM-T210R using XDA Premium 4 mobile app
Zidkijah said:
Crap, I hope it doesn't have anything to do with that permission folder I came across........ I think it was all java.
Test pack - http://www.androidfilehost.com/?fid=23060877490002706
Sent from my SM-T210R using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Looks like there's something wrong with the test pack it fails just after flashing system.img.
Zidkijah said:
Crap, I hope it doesn't have anything to do with that permission folder I came across........ I think it was all java.
Test pack - http://www.androidfilehost.com/?fid=23060877490002706
Sent from my SM-T210R using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, If I reinstall Official Firmware will Tab go back to store returnable state? On the download mode screen says
current binary: samsung official
system status: official
bespecter said:
Hi, If I reinstall Official Firmware will Tab go back to store returnable state? On the download mode screen says
current binary: samsung official
system status: official
Click to expand...
Click to collapse
Yes and no..... if they dont look to far into the tab (which they usualy dont then you will be ok) if you happen to have a techie smart guy checking it and he takes it into download mode he will notice the flash counter has 1 trigger meaning you played around with the system.. but thats less then 1% chance of happening.
Sent from my GT-P5210 using XDA Premium 4 mobile app
ShadowDice9100 said:
Yes and no..... if they dont look to far into the tab (which they usualy dont then you will be ok) if you happen to have a techie smart guy checking it and he takes it into download mode he will notice the flash counter has 1 trigger meaning you played around with the system.. but thats less then 1% chance of happening.
Sent from my GT-P5210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Where can I see flash counter? There is no flash counter I see in download mode.
Thank you for help
bespecter said:
Where can I see flash counter? There is no flash counter I see in download mode.
Thank you for help
Click to expand...
Click to collapse
This is to give you an example..... if u dont have a flash counter trigger your good to go
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-P5210 using XDA Premium 4 mobile app
ShadowDice9100 said:
This is to give you an example..... if u dont have a flash counter trigger your good to go
View attachment 2226391
Sent from my GT-P5210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank You
:good:
I have a new system image I'm working on packing up. I'm hoping this one will show some good results. I feel good about it
New Test Link - http://www.androidfilehost.com/?fid=23060877490004481
FINALLY PRE ROOTED FIRMWARE MADE BY BALLIBOXER:victory:.. THNX TO HIM:highfive:..
HERE IS THE THREAD LINK.. DOWNLOAD IT, LEAVE FEEDBACK AND ALSO LEAVE THNX FOR HIM FOR HIS HARD WORK
Lastest Prerooted Firmware Thred Link Click Here to Goo
Method
Rakesh251 said:
Dear xda member and devloper.. Please any one provide me how to root grand 2 sm-g7102 ... I searching in google but didnt find any working process.. I am happy if some one help me waiting
Click to expand...
Click to collapse
To do so, you need to keep all the precautions in mind! First of all, you'll have to take a FULL BACKUP of your device using CWM so that if you happen to brick it, you can retrieve it back!!
Read this detailed webpage and do EXACTLY as shown dude!
http://androidxda.com/root-galaxy-grand-2-sm-g7102
All the best for that!
Adnan 1O1 said:
To do so, you need to keep all the precautions in mind! First of all, you'll have to take a FULL BACKUP of your device using CWM so that if you happen to brick it, you can retrieve it back!!
Read this detailed webpage and do EXACTLY as shown dude!
http://androidxda.com/root-galaxy-grand-2-sm-g7102
All the best for that!
Click to expand...
Click to collapse
bro that is not working i already tired that process
please any developer help me.. I am requst you all of bczz of there are not a single root or cwm recovery thread made in xda or any other forum.. I just want to root my device
soon will have cwm recovery for grand 2
Sent from my SM-G7102 using Tapatalk
balliboxer said:
soon will have cwm recovery for grand 2
Sent from my SM-G7102 using Tapatalk
Click to expand...
Click to collapse
Yaa bro I know.. but I just want root my grand 2 should be rooted.. I tried 3-4 rooting process but didn't get succeeded. .. please you have grand 2 root process then tell me
i bought grand 2 a day before. Soon will sync cwm with source and make a root soon
Sent from my SM-G7102 using Tapatalk
kingo android root
use KINGO ANDROID ROOT search it on google you will find it in a sec
jimkarageo said:
use KINGO ANDROID ROOT search it on google you will find it in a sec
Click to expand...
Click to collapse
already tried this process of root today.. but its not working. means didnt get root after the process.. any universal root process which working any almost all device? ? oneclick root app also not working
did
did you enable usb debbuging?
I see.. The galaxy grand 2 is a new release in the market, so absolutely it'll take a few months for the WORKING root method to show up! Also ensure you have ALL the drivers installed and have ENABLED USB debugging in the developer menu in the settings!
Reply if this helps... Looking for more methods!
Sent from my Micromax A116 using xda app-developers app
Adnan 1O1 said:
I see.. The galaxy grand 2 is a new release in the market, so absolutely it'll take a few months for the WORKING root method to show up! Also ensure you have ALL the drivers installed and have ENABLED USB debugging in the developer menu in the settings!
Reply if this helps... Looking for more methods!
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
Yes bro Driver already installed. . and usb debugging already selected from the developer option...
Seems like a problem. Does Odin detect your device?
Sent from my Micromax A116 using xda app-developers app
Adnan 1O1 said:
Seems like a problem. Does Odin detect your device?
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
Yes odin detect.. its get yellow and the x-0005 showing.. plss help me dev for rooting
At what stage is the rooting process failing?
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 05:40 PM ---------- Previous post was at 05:25 PM ----------
Check that you have downloaded the file fully and is a valid .tar file! Connect your device in download mode.
Sent from my Micromax A116 using xda app-developers app
Adnan 1O1 said:
At what stage is the rooting process failing?
Sent from my Micromax A116 using xda app-developers app
---------- Post added at 05:40 PM ---------- Previous post was at 05:25 PM ----------
Check that you have downloaded the file fully and is a valid .tar file! Connect your device in download mode.
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
Tomorrow I add exactly ss for the problem
Rakesh251 said:
Tomorrow I add exactly ss for the problem
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
here is the ss. which i facing problem.. now please tell me exactly wht i do for rooting..the super user getting installed after this process but its get error ( " THERE IS NO SU BINARY INSTALLED. IF YOU JUST UPGRADE TO ANDROID 4.3 YOU NEED TO MANUALLY RE ROOT CONSULT YOUR DEVICE) :crying: now tell exactly
Why aren't you using Odin?
Do EXACTLY as it says, it will SURELY work bro!
Sent from my Micromax A116 using xda app-developers app
Adnan 1O1 said:
Why aren't you using Odin?
Do EXACTLY as it says, it will SURELY work bro!
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
the odin rooting process not working. i tried cf auto rooting process.. u have any other working process via odin then please please share with me here