We are not responsible for bricked devices, dead SD cards, thermonuclear
war, or the current economic crisis caused by you following these directions.
YOU are choosing to make these modificiations, and if you point the finger at
us for messing up your device, we will laugh at you.
In a serious Note,Kernel level flashing and development is pretty serious.Only brave at heart should try flashing this down.Remember to make TWRP/CWM backups and even Keep ODIN and Stock firmwares ready,it can be necessary to flash the device full due to bootloops or any such issues.My Request Please don't try to flash this if you don't know what you are doing or what this is. Neither Samsung Nor Me will take resoonsibility,if anything happens to your device.
Click to expand...
Click to collapse
Hi this is the discussion thread for a kernel for Crater.
I have been working on the kernel for 2days. its just a test build.
Need testers to tell me if its working, if it does, i will close this thread down and make an official original-development thread.
Sources :-
Sources at https://github.com/RittikBhowmik/Project-Crater-Kernel-GT-i9152
Simply clone all to a directory and run build.
Click to expand...
Click to collapse
The Development Thread Can Be Found Here--Link
Click to expand...
Click to collapse
All Questions Will be answered here, it is not possible for me to go throw every reply,but most probably it will be answered by our helpful community here.
Click to expand...
Click to collapse
Reserve 1.
I still need a stock boot.img or kernel.img from any i9152 rom. If anyone has it please post it here or PM me ASAP.
make a great kernel for our mega I9152
Rittik said:
Reserve 1.
I still need a stock boot.img or kernel.img from any i9152 rom. If anyone has it please post it here or PM me ASAP.
Click to expand...
Click to collapse
here boot.img from stock rom I9152XWUAMJ2
can u make feature like this tread...
http://forum.xda-developers.com/showthread.php?t=2390831
Thank you. I needed this. I will release new build tomorrow.
Features will be added. No ETA
Sent from my GT-I9152 using Tapatalk 4
Rittik said:
Thank you. I needed this. I will release new build tomorrow.
Features will be added. No ETA
Sent from my GT-I9152 using Tapatalk 4
Click to expand...
Click to collapse
Sounds great... recently inherited this handset but was stunned to find nothing in the way of custom rom support so this is great news
Can you you please as to any known issues so I have better idea of what to expect before flashing? It's still a casual toy at this stage (running Carbon nightlies on the S2 which is my primary device) but just like to go in educated.
Cheers
Linaro Shouldnt Break any modules. But I am posting new build soon. With probably a new governor. Should work just fine
Sent from my GT-I9152 using Tapatalk 4
There is an issue reported about the battery depletes suddenly upon reaching below 20% HERE.
Maybe this function can be enabled in the kernel to solve this problem ? "ro.ril.disable.power.collapse=1"
bongski55 said:
There is an issue reported about the battery depletes suddenly upon reaching below 20% HERE.
Maybe this function can be enabled in the kernel to solve this problem ? "ro.ril.disable.power.collapse=1"
Click to expand...
Click to collapse
i have already patched the battery.
Someone should test it out,if it works,i will open a development thread.
Added new builds.
i wiill be releasing new builds everyday. Please list some of the governors or I/O schedulers you would like to see included in this. This is a community project. I am working on overclocking, but its the first time for me to be working on Broadcom SOC,its a bit confusing inside. It would be helpful if some of you guys could provide maybe some screenshots of the "about Phone" area after flashing this.
Rittik said:
i have already patched the battery.
Someone should test it out,if it works,i will open a development thread.
Added new builds.
Click to expand...
Click to collapse
ODIN 3.07 gives an invalid file error on the tar.md5 file.
Uploaded .tar now, enough with the .tar.md5 sh**
Just Remember folks,never rename the files after downloading them. else the file will break and odin wont flash it.
Sent from my GT-I9152 using Tapatalk 4
New Test Build!
24th December 2013
Changelog-
Code:
-[i]Hopefully[/i] fixed the odin errors.
-Added a bit of overclock till 1.5Ghz thanks to k2wl
-Edited Defconfig a bit
-lulzactive Governer as the starting governer.
-Tweaked Sio I/O a bit.
Downloads- PLEASE DO NO RENAME AFTER DOWNLOAD,DOING SO WILL BREAK THE FILES
Odin .tar.md5 ---- http://www.androidfilehost.com/?fid=23269279319198688 md5:- c5b1fb23f0756feb7dc9afa62819a345
boot.img ----http://www.androidfilehost.com/?fid=23269279319198689 md5:- 87df869c9104a7ee241a06d61a33f399
Click to expand...
Click to collapse
Test Em' Out
Attached screenshot of error I get ev en on latest file.....
bongski55 said:
Attached screenshot of error I get ev en on latest file.....
Click to expand...
Click to collapse
buddy its a windows error you are getting..try this fixing proccedure.http://youtu.be/cEkoK3EHOlU
or try any other odin versions from here..LINK.
My friend had this same error, he solved it by using different odin version.
Rittik said:
buddy its a windows error you are getting..try this fixing proccedure.http://youtu.be/cEkoK3EHOlU
or try any other odin versions from here..LINK.
My friend had this same error, he solved it by using different odin version.
Click to expand...
Click to collapse
I tried ALL your suggestions(DEP cannot be disabled on odin so fixing video not applicable) but I still get the ODIN download error on windows 7. Another error type shows on XP.
Because of this error I am not able to test your files as odin stops working,Sorry.
Whether it is a windows error or something else I don't know but one thing is sure for me....it DEFINITELY has something to do with your kernel file.Seems that there is something on the kernel file triggering this errors.
ODIN is working without any error using stock firmware also on the "sammy kernel" found on the development section..
MERRY CHRISTMAS TO YOU AND YOUR FAMILY!
Same errors,,,,rittik, like before....
Sent from my GT-I9152 using xda app-developers app
Related
This kernel will be kept simple and inline with stock and free from buzzfree stuff..as the aim is a stable day-to-day use kernel..this kernel is NOT for those who want to break records..as i do not believe and rely on benchmarks..(its me..)
Disclaimer:
i nor xda would be at fault if something weird beyond my test results happen to your phone..also this is not a benchmark kernel..if you like crunching numbers and breaking records go use another kernel..this is meant to save juice and be efficient and stable as a daily driver for Samsung based ROMS..
Features:
- Based on i9205/i9195 source from Samsung OSRC(Thanks for the borked source)
- Fixed a few things left by Samsung to be broken
- Simple and no fancy stuff thats gonna bork your phones..more stuff does not guarantee it's better..
- User voltage control from faux123 for Krait CPU's..
- EXFat support(by Samsung OSRC..)
- OC(if already stable)
- will populate more as things get stable
- Selinux permission is set from enforcing to permissive via ramdisk
- insecure boot image
- Disabled Rooting security measures implemented by Samsung..
Pre-requisites
- Install busybox via CWM or via Playstore before installing my kernel..this is to make sure init.d and also some scripts work properly..
Downloads here: Test build 5(ML1 Ramdisk)
My git: source
Credits:
- noone in particular but thanks to ALL the wonderful devs here in XDA..
If you like the builds please help me get a Soda/pay bills..or the least is just hit the Thanks Button..
one more in case..
uploading..
please report/feedback on any issue you might encounter..please do provide logs(last_kmsg, logcats, dmesg...etc..) so that i can shoot things out..i do not own the device yet and surely things can go wacky along the way..
TIA
kindly someone report if the build boots up..
What do you mean with those features?
- Fixed a few things left by Samsung to be broken
- Removed most of the crappy and buggy stuff..
- GPU Idling fix..
Click to expand...
Click to collapse
I cannot see them on your sources
Grarak said:
What do you mean with those features?
I cannot see them on your sources
Click to expand...
Click to collapse
will push them tomorrow(just have to know if the build boots or not)..samsung left an issue on the video drivers for ebook mode(scenario mode)..which can hinder compilation..why so curious?? you're the idol..
kairi_zeroblade said:
will push them tomorrow(just have to know if the build boots or not)..samsung left an issue on the video drivers for ebook mode(scenario mode)..which can hinder compilation..why so curious?? you're the idol..
Click to expand...
Click to collapse
I was curious how you described these features. If it's only an e book reader issue, you cannot call it remove crappy stuff by samsung.
Sent from my Galaxy Nexus using xda app-developers app
Grarak said:
I was curious how you described these features. If it's only an e book reader issue, you cannot call it remove crappy stuff by samsung.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
ok so if it bothers you then i will ninja edit it then..its just a general template i used on my previous OP..dont be so harsh on me..
update: edited it to "fit" your standards.. (what a way to welcome me here........now i can go to bed..and get my beauty sleep.. )
update: good morning guys!! any reports or comments if it boots up?? need feedbacks so i can start pushing more stuff..
I tried it on a I9200.
Device boots
No wifi
Lost root
For some reason, Google+ stopped working
Logcat attached.
Silesh.Nair said:
I tried it on a I9200.
Device boots
No wifi
Lost root
For some reason, Google+ stopped working
Logcat attached.
Click to expand...
Click to collapse
thanks will invetigate the logs provided..can you upload a stock image of the i9200 btw??so i can check if there are specific differences from the ramdisk of the i9200 from i9205..afaik aside from the LTE there should be other differences from them..
re: root it might have been because of the ramdisk i used..can you shift to Koush's superuser??chainfire's supersu has been finicky with my HTC 4.3 update but Koush's never had a glitch..
Thank you very much for the feedback!!
edit: get the SuperUser by Koush here
Stock MJ1 I9200 boot image attached. I'll let you know if I succeed to root.
Silesh.Nair said:
Stock MJ1 I9200 boot image attached. I'll let you know if I succeed to root.
Click to expand...
Click to collapse
can you pull me a last_kmsg from my kernel??it seems there is a hardware initialization issue..TIA
kairi_zeroblade said:
can you pull me a last_kmsg from my kernel??it seems there is a hardware initialization issue..TIA
Click to expand...
Click to collapse
Attached.
Silesh.Nair said:
Attached.
Click to expand...
Click to collapse
ok nailed down the culprit..will release a new test build in a few minutes thanks Silesh..it seems i was missing a few stuff..
kairi_zeroblade said:
update: new test build here OP updated as well
kindly test and provide feedback so i can push more stuff in..i have to do alot more maintaining also to my git..
Click to expand...
Click to collapse
I am testing my slimkat build. Will flash and let you know in an hour.
Silesh.Nair said:
I am testing my slimkat build. Will flash and let you know in an hour.
Click to expand...
Click to collapse
thank you it seems i made a minor derp..will fix it now..and upload a new kernel.
OK. When you upload, mention me so that I get a noification. Else I need to check the thread often.
Silesh.Nair said:
OK. When you upload, mention me so that I get a noification. Else I need to check the thread often.
Click to expand...
Click to collapse
update: get test build 3 here
kairi_zeroblade said:
update: get test build 3 here
Click to expand...
Click to collapse
Still no wifi. Root works, both SuperSU and Koush. Logs attached.
Silesh.Nair said:
Still no wifi. Root works, both SuperSU and Koush. Logs attached.
Click to expand...
Click to collapse
ok got it..will switch to the ML1 ramdisk you gave me..will post a new build in a few minutes..
edit: it seems i was messing with the UCNA2 update with SELINUX..thats why i was borking things..i am now using the ML1 ramdisk..
@silesh
new build up..here
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.2.2 JB, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Latest Build:
2/9/14
Link Removed
Gapps - Not needed until build is completely fixed.
Installation
- First time flashing CM-10.1 ROM?
Download Rom to sdcard.
Reboot into Recovery
WIPE: (wipe data/factory reset + wipe cache + dalvik cache partition)
Install the ROM
Working
Gralloc is currently crashing surfaceflinger
Not working
Almost everything due to force closes.
Changelog:
20140209
Updated device tree.
Built hwcomposer and gralloc from source code based on comoyo device tree.
20140208
Initial release with significant changes.
Previous builds:
Taking a logcat on these builds:
As soon as the bootanimation begins to play execute below command via terminal
or command prompt with adb installed for Windows. Upload the file it makes which is logcat.txt
Code:
adb logcat -d > logcat.txt
Special Thanks
Comoyo https://github.com/comoyo for commits for spreadtrum
batman38102 , sambathpkr , and Archit
This is a test build thanks to everyone for helping me
Source (Branch cm-10.1)
https://github.com/CM-SPRD
https://github.com/CyanogenMod
Dude i will help u as much i can. Currently i even didnt own this device Feel free to ask for any support.
Sent from my GT-9505i using Tapatalk
Building now hopefully it boots with more working things after some massive changes I've did a lot of research about this stuff
https://github.com/TeamRegular/android_device_samsung_mint/commits/cm-10.1
Unjustified Dev said:
Building now hopefully it boots with more working things after some massive changes I've did a lot of research about this stuff
https://github.com/TeamRegular/android_device_samsung_mint/commits/cm-10.1
Click to expand...
Click to collapse
Hoping For a Stable Build......:good:
yup we are with u
just keep up the work we really need a cm for our phones by now
let us know for any help ofcourse:laugh::good:
And it's off to building again build had failed previously and now I am able to produce a working cwm as well .
Here's a little surprise same instructions from DOC thread
cm-10.1
http://goo.gl/ZoIYcr
Unjustified Dev said:
And it's off to building again build had failed previously and now I am able to produce a working cwm as well .
Here's a little surprise same instructions from DOC thread
cm-10.1
http://goo.gl/ZoIYcr
Click to expand...
Click to collapse
So for which version of cwm u r porting for s5282
Sent from my GT-9505i using Tapatalk
rahulsinghal said:
So for which version of cwm u r porting for s5282
Sent from my GT-9505i using Tapatalk
Click to expand...
Click to collapse
Same one. My issue was my kernel . I did not want to release a build that would get stuck on bootlogo I had batman test recovery to make sure it worked we got it working by pulling defconfig from the device.
https://github.com/TeamRegular/andr...mmit/e8bb5520806d9028a50acf03daf3a1a29a1de8f5
Now I am actually porting twrp since they added a new 240 theme
Unjustified Dev said:
Same one. My issue was my kernel . I did not want to release a build that would get stuck on bootlogo I had batman test recovery to make sure it worked we got it working by pulling defconfig from the device.
https://github.com/TeamRegular/andr...mmit/e8bb5520806d9028a50acf03daf3a1a29a1de8f5
Now I am actually porting twrp since they added a new 240 theme
Click to expand...
Click to collapse
Nice work. Keep it up
Sent from my GT-9505i using Tapatalk
rahulsinghal said:
Nice work. Keep it up
Sent from my GT-9505i using Tapatalk
Click to expand...
Click to collapse
No ones going to test my cm build?
Unjustified Dev said:
No ones going to test my cm build?
Click to expand...
Click to collapse
Dude i will surely test your cm build but i cant bcoz i dont own this device now. Let me ask from @batman38102
Sent from my GT-9505i using Tapatalk
Unjustified Dev said:
No ones going to test my cm build?
Click to expand...
Click to collapse
Hey i'm going to test it.but downloading is not working.it says some 509 error
sambathpkr said:
Hey i'm going to test it.but downloading is not working.it says some 509 error
Click to expand...
Click to collapse
Go for it dude. Hope it works better than previous one
Sent from my GT-9505i using Tapatalk
rahulsinghal said:
Go for it dude. Hope it works better than previous one
Sent from my GT-9505i using Tapatalk
Click to expand...
Click to collapse
DONT FLASH IT. It boots but everything force closing so PLEASE DO NOT FLASH IT
problem
I tested it.it booted successfully.but it has issues
1. systemui unfortunately stopped.
2. Unfortunately cyanogenmod cannot be created.
it does not even goes to launcher.:crying:
Unjustified Dev said:
Hi , I am developer I do not own this device. I will attempt at my best to provide a working build on cm-10.1 and maybe we can go even further. If you are able to donate a phone that will speed up the process if not it's ok . I will only work on this on weekends. I ask that anyone interested in helping me please PM me and get on hangouts. I will not be able to chat much nor always answer post. I am not the best developer , but i should be able to fix some things even without the device.
Device source same as the one used to build booting cm-10.1 soon to be rewritten
https://github.com/TeamRegular/android_device_samsung_mint
Kernel source
https://github.com/TeamRegular/android_kernel_samsung_mint
vendor
https://github.com/TeamRegular/android_vendor_samsung_mint
Click to expand...
Click to collapse
Dude note that only deodexed rom seems to work fine on this device
Sent from my GT-9505i using Tapatalk
rahulsinghal said:
Dude note that only deodexed rom seems to work fine on this device
Sent from my GT-9505i using Tapatalk
Click to expand...
Click to collapse
I am using odexed like DOC. Look at my commit. I am not using software rendering. I have the actual egl and gpu blobs working. I added audio blobs and more. Doc had no proprietary files and it had no reason to force close.
https://github.com/TeamRegular/android_device_samsung_mint/blob/cm-10.1/BoardConfig.mk#L111
Unjustified Dev said:
I am using odexed like DOC. Look at my commit. I am not using software rendering. I have the actual egl and gpu blobs working. I added audio blobs and more. Doc had no proprietary files and it had no reason to force close.
https://github.com/TeamRegular/android_device_samsung_mint/blob/cm-10.1/BoardConfig.mk#L111
Click to expand...
Click to collapse
so r we at a dead end??
hey and i checked the link you sent me
and m not a develpoer so i dint understand a thing:silly:
but some data as i understand it is probably wrong
for eg the device resolution is 240x320
u mite have written it for a reason but i thot i should point out
again i am no developer i just want to help
@rchit said:
so r we at a dead end??
hey and i checked the link you sent me
and m not a develpoer so i dint understand a thing:silly:
but some data as i understand it is probably wrong
for eg the device resolution is 240x320
u mite have written it for a reason but i thot i should point out
again i am no developer i just want to help
Click to expand...
Click to collapse
That's correct unless you were looking at twrp they don't have a 240x320 theme yet. I am not working on this as it's a school day I will only work on free days and weekends.
Sent from my SPH-D710 using Tapatalk
Unjustified Dev said:
That's correct unless you were looking at twrp they don't have a 240x320 theme yet. I am not working on this as it's a school day I will only work on free days and weekends.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
ok cool do u think u can build us a stable recovery and cm
and i know you might be getting a lot of msgs but can u give us an estimate time for a stable build??
thanks a lot for ur help really appreciate it
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
This Support of the CyanogenMod is Unofficial and the sources are up at Androidarmv7.
STRICTLY FOR DEVELOPERS ONLY, NOOBS PLEASE DONT INSTALL IT NOW.
Don't know when Samsung will officially announce Kitkat update for our Galaxy Grand 2, so thought to create own CM-11 (Kitkat 4.4.4).
The ROM zip file is ready to test but at present it is giving Error 7 while flashing in Recoveries (TWRP, CWM and Philz). I have tried many times to get success in all recoveries but still no luck, so thought to share with other developers to check and find the error. At present it is not on github so please dont ask for link, will upload it soon. I have just compiled it from CyanogenMod source in my pc only.
I've got this idea to share with other developers from past experience with LG-P500. It is almost 4 years old phone and still running with KITKAT (see my signature). Developer AndroidMeda from Jenkins initially developed that rom for LG-P500 users without any success for almost 2 weeks from its release date and all lg-p500 developers/users tried their luck to get success. Luckly I was the first one to taste yummy KitKat on LG-P500 and after that it all went smooth.
So I am hopeful and looking forward to developers to get success soon for Grand 2 too.
Sharing ROM Link and my unsuccessful recovery logcat for reference.
Link : REMOVED BY VECTUS
reserved for future
one more reserved
is this official CM?
Sent from my SM-G7102 using XDA Premium 4 mobile app
Thanx for creating cm. And will you be making cm official ? I aint the best but.....
As I can see, theres a lot of mount and selinux failing problems.
And are you using first or second build of twrp ? As the second one has some fix for seLinux
mobihack said:
Thanx for creating cm. And will you be making cm official ? I aint the best but.....
As I can see, theres a lot of mount and selinux failing problems.
And are you using first or second build of twrp ? As the second one has some fix for seLinux
Click to expand...
Click to collapse
Ohhh thanks... I was using first built of TWRP, can you guys check on twrp built 2?
mukulsoni said:
Ohhh thanks... I was using first built of TWRP, can you guys check on twrp built 2?
Click to expand...
Click to collapse
Try use Philz ... I have problem with backup with twrp... So i use philz.... Just use philz... And @mukulsoni see my pm . maybe that can make the rom success in recovery
Glad i could help. And if I had the bandwidth I would download it for sure but I am on a limited plan.
Pl publish ur sources i.e device tree,kernel tree and vendor files .....
EDIT: did u add selinux support to the kernel source? thats the error
rutvikrvr said:
Pl publish ur sources i.e device tree,kernel tree and vendor files .....
EDIT: did u add selinux support to the kernel source? thats the error
Click to expand...
Click to collapse
Right..I think I told him to modify the kernel sources. @mukulsoni, enable the selinux settings in the kernel source. And also please mention the sources. If you don't you will violate GPL.
Sent from my GT-I9082 using Tapatalk
INFO
First of all thanks to the deve, Has anyone tested this, is it working please let me know.
vandroid699 said:
First of all thanks to the deve, Has anyone tested this, is it working please let me know.
Click to expand...
Click to collapse
you can try yourself.. and because you a dev for our grand 2, maybe you can fix the problem
mukulsoni said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Sharing ROM Link and my unsuccessful recovery logcat for reference.
Click to expand...
Click to collapse
Bro I got the problem......... i will be see it if it fix it then ...... i will let u know...............
aapav01 said:
Bro I got the problem......... i will be see it if it fix it then ...... i will let u know...............
Click to expand...
Click to collapse
Great, if you've got the error. Now I am able to flash it successfully in all 3 recoveries and when I click to reboot system its return back to download mode. So we have to work on kernel part now. lets hope for your success. :fingers-crossed:
Bro See the SS after fix the Flashing issuse ....................... but it boot to Odin MOde saying.. Couldnt do normal boot
mukulsoni said:
Great, if you've got the error. Now I am able to flash it successfully in all 3 recoveries and when I click to reboot system its return back to download mode. So we have to work on kernel part now. lets hope for your success. :fingers-crossed:
Click to expand...
Click to collapse
Yes It do boot to Downloading mode
aapav01 said:
Bro See the SS after fix the Flashing issuse ....................... but it boot to Odin MOde saying.. Couldnt do normal boot
Click to expand...
Click to collapse
As I said above, its get into Download mode, need to work on kernel part. Can you or any developer extract the kernel from this rom and work on it, at present I am busy in some other work.
mukulsoni said:
As I said above, its get into Download mode, need to work on kernel part. Can you or any developer extract the kernel from this rom and work on it, at present I am busy in some other work.
Click to expand...
Click to collapse
Im not to gud in Kernel bro
------------------------------------------------------------------------------
i Hve change the the following thing:
> update-binary
> path of system from " /dev/block/mmcblk0p22 " to " /dev/block/platform/msm_sdcc.1/by-name/system "
> path of boot.img to " /dev/block/mmcblk0p14 " to " /dev/block/platform/msm_sdcc.1/by-name/boot "
Just this MUCH... :angel:
modified file in Below
aapav01 said:
Im not to gud in Kernel bro
------------------------------------------------------------------------------
i Hve change the the following thing:
> update-binary
> path of system from " /dev/block/mmcblk0p22 " to " /dev/block/platform/msm_sdcc.1/by-name/system "
> path of boot.img to " /dev/block/mmcblk0p14 " to " /dev/block/platform/msm_sdcc.1/by-name/boot "
Just this MUCH... :angel:
modified file in Below
Click to expand...
Click to collapse
Can we try using CM with Stock Kernel??
white7561 said:
Can we try using CM with Stock Kernel??
Click to expand...
Click to collapse
nope
What is NamelessROM?
NamelessROM Gerrit Review
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
ANNOUNCEMENT: We are looking for Device Maintainers to expand our support, please visit our IRC channel or PM @Evisceration, or @jumoog @dhiru1602 for information.
Disclaimer
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
Working:
Everything (including hardware composer)
Click to expand...
Click to collapse
Got a bug report? Want to request a feature? Need extended support?
https://nameless-rom.org/
https://plus.google.com/communities/111682533298374492637
https://jira.nameless-rom.org/
Click to expand...
Click to collapse
Installation Instructions
FROM OTHER ROMS
Factory Reset/Wipe Data
Format System
Format Dalvik Cache
Install ROM
Install Gapps
Reboot
Profit
UPDATE FROM NamelessROM TO NEWER RELEASE
Just download the zip and flash it. You will NOT need to wipe anything.
Optionally you can also use our own OTA Updater
Click to expand...
Click to collapse
Contributions and Credit
Android/Google/AOSP
AOKP
AOSPA
CyanogenMod
OmniROM
SlimROMs
ALL OF OUR AWESOME TESTERS
Click to expand...
Click to collapse
Downloads
Rom:
https://mega.co.nz/#!Mc0U0ShL!uF6i1NsYJbthAROkZeE0GmLcx8waHdLAtI3UHitdag0
Gapps for 5.0:
https://s.basketbuild.com/gapps
Gapps mirror:
https://mega.co.nz/#!5R0D1B4L!1zP2aiDzlBAQ05I4UkgTNaVVLQME9Yjj1Fl7nwAPzs0
Click to expand...
Click to collapse
Reserved. Just in case...
wow cool,,, im trying to compile cm12, not booting, stays on cm bootanimation, maybe we could work together with @infrag too to get this awesome device up-to-date
Can you get me a logcat? Then I'll try to fix it in the evening
Edit: now I think you are talking about your build for i9305, not mine. Please clarify
im trying to do adb shell cat /proc/last_kmsg > kmsg.txt
but it says device not autherised,, im acutally building for both devices
Any particular gapps package we need to install?
i think PA has a gapps package for 5.0...... somewhere lol
---------- Post added at 09:41 PM ---------- Previous post was at 09:38 PM ----------
sawdoctor said:
Any particular gapps package we need to install?
Click to expand...
Click to collapse
does it bootup @sawdoctor
sawdoctor said:
Any particular gapps package we need to install?
Click to expand...
Click to collapse
I used these on my HTC http://forum.xda-developers.com/showthread.php?p=56810851
Sent from my GT-N7105 using XDA Free mobile app
winxuser said:
im trying to do adb shell cat /proc/last_kmsg > kmsg.txt
but it says device not autherised,, im acutally building for both devices
Click to expand...
Click to collapse
I still don't know if you are talking about mine build, or yours.
If you are talking about yours, try replacing adb binary with insecure one
DerTeufel1980 said:
I still don't know if you are talking about mine build, or yours.
If you are talking about yours, try replacing adb binary with insecure one
Click to expand...
Click to collapse
sorry yeah im talking about mine lol,
winxuser said:
i think PA has a gapps package for 5.0...... somewhere lol
---------- Post added at 09:41 PM ---------- Previous post was at 09:38 PM ----------
does it bootup @sawdoctor
Click to expand...
Click to collapse
Flashed it without gaps to see if it boots and stuck on the devil splash screen. Going to try a battery pull see if it helps
sawdoctor said:
Flashed it without gaps to see if it boots and stuck on the devil splash screen. Going to try a battery pull see if it helps
Click to expand...
Click to collapse
doesnt help i tried with my s3 lte with my compiled cm12 and it didnt do anything
sawdoctor said:
Flashed it without gaps to see if it boots and stuck on the devil splash screen. Going to try a battery pull see if it helps
Click to expand...
Click to collapse
Still not booting but when you press the screen the soft keys light up so there is some life there
sawdoctor said:
Flashed it without gaps to see if it boots and stuck on the devil splash screen. Going to try a battery pull see if it helps
Click to expand...
Click to collapse
Thanks. It's just sitting on devil logo forever?
I guess adb isn't working?
DerTeufel1980 said:
Thanks. It's just sitting on devil logo forever?
I guess adb isn't working?
Click to expand...
Click to collapse
i have the same with cm12 on i9305
I think I probably didn't disable selinux in kernel.... I'll upload a new build in about 6 to 7 ours.
DerTeufel1980 said:
I think I probably didn't disable selinux in kernel.... I'll upload a new build in about 6 to 7 ours.
Click to expand...
Click to collapse
haha just my thoughts just then,, i just changed the i9305 defconfig to disable selinux
mine might take a little longer to compile lol, ,i only use 4 cores out of 6 to compile,,
edit: btw which kernel sources are you using,, im using JustArchi's kernel sources, has lots of kernel fixes
DerTeufel1980 said:
Thanks. It's just sitting on devil logo forever?
I guess adb isn't working?
Click to expand...
Click to collapse
Didn't try adb sorry I wasn't at home to connect pc. I'll be home from work at 5pm UK time I'll glady test anything you want this evening and pull any logs you need
DerTeufel1980 said:
I think I probably didn't disable selinux in kernel.... I'll upload a new build in about 6 to 7 ours.
Click to expand...
Click to collapse
when you upload new build? thanks.
winxuser said:
haha just my thoughts just then,, i just changed the i9305 defconfig to disable selinux
mine might take a little longer to compile lol, ,i only use 4 cores out of 6 to compile,,
edit: btw which kernel sources are you using,, im using JustArchi's kernel sources, has lots of kernel fixes
Click to expand...
Click to collapse
I am using my kernel for building i9300, N7100 and t0lte. Never ported it to i9305 though.
sawdoctor said:
Didn't try adb sorry I wasn't at home to connect pc. I'll be home from work at 5pm UK time I'll glady test anything you want this evening and pull any logs you need
Click to expand...
Click to collapse
Thanks. If you'd have some time to try adb would be great. I'll start working on it again at about 6 pm German time [emoji1]
ODEX + DEODEX ROM made from D620R .kdz firmware
HTML:
* your warranty is now void.
*
* i am not responsible for bricked devices, dead sd cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this rom
* before flashing it! You are choosing to make these modifications, and if
* you point the finger at me for messing up your device, i will laugh at you.
-- This is my first rom, that I build from scratch using several guides on xda I hope that it will jump start development for our lovely phone and provide more data and useful files to ongoing custom roms. You can use this rom to make CUSTOM STOCK ROM's, and it would be nice if you mentioned me as source for your rom
-- I didn't test it since my phone is not rotted yet and I didn't unlock bootloader I hope that you will test this rom, since I didn't change anything from stock and I just extracted it and made odex and deodexed version.
Next thing I plan is to root and unlock bootloader on my phone and to try to use G3 theme and apps from G2 stock roms I will keep you updated as times goes bye, but you are free to do it on your own since I don't know when will I have time since holidays are coming
Steps of extracting rom:
1. I have used first 8 steps from this thread:
http://forum.xda-developers.com/showpost.php?p=50743197&postcount=1
2. After that I have made flashable zip using step 3 from:
http://forum.xda-developers.com/showpost.php?p=54935317&postcount=1
3. system.img is in ext2 format, so I used Ext2Explore to extract all the folders
http://forum.xda-developers.com/showpost.php?p=41818037&postcount=1
4. Rom is now in ODEX form, so I needed to DEODEX it:
http://forum.xda-developers.com/showpost.php?p=53004485&postcount=1
Click to expand...
Click to collapse
FEATURES:
- Based on D620R10E_00.kdz
- Without Root
- Odex and Deodex versions
Click to expand...
Click to collapse
I HAVE REMOVED DOWNLOAD LINKS UNTIL I RESOLVE /SYSTEM error
-------------------------------------------------------------------------------------------------------------
Please test it and report back, every bit of help is appreciated And I hope we can start making new ROM's for our phone
Thank you wall
@somboons .kdz to system.img extracting tutorial
@k2wl .kdz to system.img extracting tutorial
@GethPrime EXT2 explorer
@umair928 KK DEODEX
Click to expand...
Click to collapse
reserved
gonna try It this afternoon
download speed is too slow. maybe i try it tomorrow
can i ask? how can i deodexed my stock rom D618? thanks
System_F said:
gonna try It this afternoon
download speed is too slow. maybe i try it tomorrow
Click to expand...
Click to collapse
I tried to download it from work and from home, and I had maximum download speed (1mb and 4mb ), I will try to upload it to faster server today/tomorow.
restuesaputra said:
can i ask? how can i deodexed my stock rom D618? thanks
Click to expand...
Click to collapse
All the steps are in the first post
This is for flash in cwm for example?
doloresmiska said:
This is for flash in cwm for example?
Click to expand...
Click to collapse
Yes it is
Next week I will root and unlock bootloader on my phone, and then try to make stock rom with G3 apps
I have problem. I wanted flash this ROM but in twrp i was an error "Can't mount /system". After this, my system came bootloop... i dont know what i doing wrong. (I flash this from Crystal PA rom).
Since author dont test it dont flash this rom. I dont see any point to publish the untested rom.
doloresmiska said:
I have problem. I wanted flash this ROM but in twrp i was an error "Can't mount /system". After this, my system came bootloop... i dont know what i doing wrong. (I flash this from Crystal PA rom).
Click to expand...
Click to collapse
Sorry to hear that, I hoped that it ould work from the start, since I didn't do any modification. I will try it myself next week and report if I succeed in making it work without problem
partyzant_x said:
Since author dont test it dont flash this rom. I dont see any point to publish the untested rom.
Click to expand...
Click to collapse
I have published it as my first try of making ROM, and as potential source of drivers and modules for other developers
I have found out that my update script in METAINF folder was missing, that is why /system was not mounted. I have fixed it, and I will test it in 1-2 days. So if everything works we will have flashable stock ROM
test it first pls
doloresmiska said:
test it first pls
Click to expand...
Click to collapse
I will there will not be any links until I test it
i have a working build... what i need to do?
Post it here or create a new thread?
System_F said:
i have a working build... what i need to do?
Post it here or create a new thread?
Click to expand...
Click to collapse
Since you made working build, it is better to make your on thread.... It is your work
I made build that probably works, but I didn't have time to test it.
I will close my thread
predragiPredrag said:
Since you made working build, it is better to make your on thread.... It is your work
I made build that probably works, but I didn't have time to test it.
I will close my thread
Click to expand...
Click to collapse
Ok, thanks for info!
woks with g2 mini d625?
sergio2801 said:
woks with g2 mini d625?
Click to expand...
Click to collapse
No it does not work. There is still no ROMs for D625
sergio2801 said:
woks with g2 mini d625?
Click to expand...
Click to collapse
This is only stock ROM ...
Got any further with fixing the system error?