[Q] Galactus Mod V4.2 : stuck on Samsung Logo - Android Q&A, Help & Troubleshooting

Hello Guys/Girls, with my N7000 (Samsing Note 1) I was coming from CM9.1 (ICS) and was trying to flash Galactus Mod v4.2. Followed all the instructions, wiped system/predoad/cache/dalvic but my device keeps stuck on the Samsung Logo... tried it again and again, but without better results.. Any suggestions how to fix this?

Maybe the problem is in the recovery mode?
What recovery mode do you use?
Sent from my GT-N7000 using XDA Premium 4 mobile app

Related

Firmware upgrade issue

I rooted my galaxy s2 the other day and also installed a jelly bean rom called ShoStock 3 on it. I wanted to install a siyah kernal as well so i tried going into clockworkmod recovery but it failed and my phone wouldn't boot. So i fixed it by using download mode and just installing a stock rom but now it says firmware upgrade encoutered an issue because i accidently pulled the usb plug out. Please help it wont work now.
Flash stock again from that screen
Sent from my SGH-I777 using xda premium
Did you use ROM manager?
Sent from my GT-I9100 using Tapatalk 2

[Q] Ace-i-Sure ROM Brick

Hello guys:
I have flashed Ace-i-Sure from CWM and how to say the author, but I have waited 10 minuts and It stop in Samsung Galaxy Logo. Plaease helpme, I don't know what i do.
Regards
AW: [Q] Ace-i-Sure ROM Brick
Search before posting...
http://forum.xda-developers.com/showthread.php?t=1551156
Gesendet von meinem GT-S5830i mit Tapatalk 2
I have unbricked phone with CWM Restore. Do you recomend some ROM for me?
Yunito53 said:
I have unbricked phone with CWM Restore. Do you recomend some ROM for me?
Click to expand...
Click to collapse
Try going to Development section and check features of some ROMs and then try what you like
Why would you want our choice on your phone?
It's your phone and your choice
im using a mincr 2,8 an is estable and secure to flash
Sent from my GT-S5830i using xda app-developers app
Fix
I know this is an old thread but we had the same issue installing this ROM onto a device with STOCK firmware GINGERBREAD 3.2.6
Flashing using CWM the phone got stuck on the Samsung galaxy logo
ROM install without CWM in recovery bricked the device and it got stuck in boot-loop
The solution: After installing the stock ROM using Odin, make sure you have a clean install! (This is important) then wipe the data, cache and dalvik cache and proceed to flash ace-I-sure
As always before you do any of this make sure you use CWM to backup your phone to SD so you can roll back!
IF YOUR DEVICE IS BRICKED - USE THIS VIDEO TO RESTORE STOCK!
Cant post the link because I'm a new member - but search "Unbrick Ace 5830i via ODIN" the uploader is by Amritpal Singh
Cynosure Studios said:
I know this is an old thread but we had the same issue installing this ROM onto a device with STOCK firmware GINGERBREAD 3.2.6
Flashing using CWM the phone got stuck on the Samsung galaxy logo
ROM install without CWM in recovery bricked the device and it got stuck in boot-loop
The solution: After installing the stock ROM using Odin, make sure you have a clean install! (This is important) then wipe the data, cache and dalvik cache and proceed to flash ace-I-sure
As always before you do any of this make sure you use CWM to backup your phone to SD so you can roll back!
IF YOUR DEVICE IS BRICKED - USE THIS VIDEO TO RESTORE STOCK!
Cant post the link because I'm a new member - but search "Unbrick Ace 5830i via ODIN" the uploader is by Amritpal Singh
Click to expand...
Click to collapse
We all know that dude
It's from one of the stickies in Development Section
Hay guys I am noob here but I got same problem, is this rom
Need xxl2 firmware cause I have XXLI1 firmware? Something like that??
Sent from my GT-S5830i using xda premium
Its your phone its your choice.......heh heh heh.......class.:laugh:
Yunito53 said:
Hello guys:
I have flashed Ace-i-Sure from CWM and how to say the author, but I have waited 10 minuts and It stop in Samsung Galaxy Logo. Plaease helpme, I don't know what i do.
Click to expand...
Click to collapse
Switching between roms may softbrick your phone. If you are stuck at bootscreen while flashing, the solution may already specified in respected threads. There are 3 links specified in Ace-i-Sure ROM thread for solving stuck at boot logo.
Sent from my GT-S5830i using xda app-developers app
brijeshep said:
Switching between roms may softbrick your phone. If you are stuck at bootscreen while flashing, the solution may already specified in respected threads. There are 3 links specified in Ace-i-Sure ROM thread for solving stuck at boot logo.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Ah thanks! I have solved that problem. I have flashed with Ace-i-sure 10.0. But... One Question... This ROM drain very fast the battery. How can i solve it?
Yunito53 said:
Ah thanks! I have solved that problem. I have flashed with Ace-i-sure 10.0. But... One Question... This ROM drain very fast the battery. How can i solve it?
Click to expand...
Click to collapse
It's not the problem of rom.
Freeze Some apps like maps, YouTube... those are working as background apps.
Turnoff wifi, GPS, packet data when not in use.
Selecting 2G only will improve battery backup.
Set Screen brightness to minimum level.
Sent from my GT-S5830i using xda app-developers app

How to make custom rom compatible with baseband. Pl help

I have Samsung galaxy i5503. Initially i have changed my stock Rom to cynogenmod 7. But it started boot loop on Samsung logo. Then i have updated baseband to LUYJPEI5500 and it solved my problem.
But i am having connection problem in 3G mode.
My question is how to make i5503 baseband compatible with cynogenmod 7.
Or
Any solution for connectivity issue?
Sent from my GT-I5500 using xda app-developers app

[q] pls help. Phone not booting

I WAS HAVING GALAXY S2 JB 4.2 FOR GALAXY ACE.
I UNROOTED WID ODIN by the package S5830JPKS2_S5830OJPKS2_S5830XWKS2_HOME.tar.md5
the operation wass succes.
but it is not booting. the samsung logo comes
(the second animated logo) and continues. but the ui is not loading plas help
Go back to stock or install cmw and install new custom rom, its not bricked when bootlogo shows up
Sent from my LT26i using xda premium
thanks
milad407 said:
Go back to stock or install cmw and install new custom rom, its not bricked when bootlogo shows up
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
but i have done it simply and worked. b4 u posted the comment. but anyway thanks

[Q] Galaxy S Duos GT-S7562 stuck at boot logo

Hello!I bought a Galaxy s Duos S7562 and i installed rom cosmic V1.It was working .But after that, i find out about pmp ultra light rom.I tried to install it but it remains stuck at boot logo, I mean it is restarting at infinite.I tried a lot of basebands, kernels but the same thing happened.Now i tried to install Cosmic rom V2 and before that, I installed Fat.bin with ODin 3.04 but the problem persists.I used the baseband :Bmj1 ; Amd; Bmd but with no ressult!Do you know how to fix it?
I think you have to flash the stock rom....
Sent from my GT-S7562 using XDA Premium 4 mobile app
Yes, before installing the custom rom.

Categories

Resources