[ROM][03/10][4.4.4][HOVER]Paranoid Android 4.6 BETA 3 {AOSPA} Unofficial - Galaxy S Advance I9070 Original Android Developmen

» Installation:
CWM:-
If you are on JellyBean ROM then :-
Download ROM
Download Gapps
Select the Reboot into recovery option
Format System (under Mounts and Storage section)
Wipe data/Factory reset
Flash ROM
Flash Google Apps (Gapps)
Reboot
If you are on any other Kitkat ROM then,
Download ROM
Download Gapps
Reboot into recovery
Format System (under Mounts and Storage section)
Wipe data/Factory reset
Flash ROM
Flash Google Apps (Gapps)
Reboot
If updating then,
Download NEW ROM
Download NEW Gapps (If updated)
Reboot into recovery
Wipe Cache
Wipe Dalvik Cache
Flash ROM
Flash Google Apps (Gapps) (I recommend doing this because AOSPA Gapps are regularly updated.)
Reboot
NOTE:- If u face problems like apps crashing and various force-stops after updating by the above method then I would recommend clean install mentioned just above the UPDATING STEPS.
Paranoid Android Official Changelog:- http://forum.xda-developers.com/showthread.php?t=2583582
S Advance Changelog:-
Code:
16/07/14
[LIST]
[*]4.8 Toolchains
[*]Device tree updated
[*]Kernel updated.
[*]Squashed some bugs by AOSPA
[/LIST]
[LIST]
[*]Device Changelog:
[*]Device tree updated
[*]Kernel updated.
[*]Squashed some bugs by AOSPA
[/LIST]
10/07/14
[LIST]
[*]Kernel Updated
[*]U8500 Hardware sources updated.
[*]Experimental Commit to adjust the size of clock in status bar, to avoid half visible icons. (Need feedback for the same)
[*]Legacy Parts added in all AOSPA-Legacy ROMs.
[/LIST]
02/07/14
[LIST]
[*]Fix Documents UI crashing
[*]Full battery meter theming from CM
[*]Other upstream theme engine fixes
[*]Translations updated
[*]Other miscellaneous bugfixes
[/LIST]
26/06/14
[LIST]
[*]SD Card issue fixed
[*]Camera Fixed.
[*]Janice Device Tree updated.
[*]Kernel updated. (3.0.101)
[*]Common Device u8500 tree updated.
[*]AOSPA Source updated.
[*]HOVER fixes.
[/LIST]
18/06/14
[LIST]
[*]FINALLY OTA ADDED. :D
[*]Janice Device Tree updated.
[*]Kernel updated. (3.0.101)
[*]Common Device u8500 tree updated.
[*]AOSPA Source updated.
[*]HOVER fixes.
[/LIST]
13/06/14
[LIST]
[*]Camera fixed.
[*]Torch Fixed. (Issues in earlier build)
[*]Janice Device Tree updated.
[*]Kernel updated. (3.0.101)
[*]Common Device tree updated.
[*]AOSPA Source updated.
[*]HOVER added.
[/LIST]
08/06/14
[LIST]
[*]Android version 4.4.3
[*]Camera fixed. (Was a 4.4.3 Issue)
[*]Bluetooth fixed.
[*]i9070 Device tree updated.
[*]Updated Kernel. - 3.0.101
[*]Updated common device tree- u8500
[/LIST]
05/06/14
[LIST]
[*]AOSPA Source updated
[*]Janice Device tree updated
[*]u8500 Device tree updated
[*]Kernel updated
[/LIST]30/05/14
[LIST]
[*]Janice Device tree updated
[*]u8500 Device tree updated
[*]Kernel updated
[*]AOSPA Source updated
[/LIST]
22/05/14
[LIST]
[*]Janice Device tree updated
[*]u8500 Device tree updated
[*]Kernel updated
[*]Many features added
[*]Minor Bug fixes
[*]Battery Optimized
[*]AOSPA Source updated
[/LIST]
03/04/14
[LIST]
[*]Janice Device tree updated
[*]u8500 Device tree updated
[*]Kernel updated
[*]Many Bug fixes
[*]Battery Optimized
[*]AOSPA Source updated
[/LIST]
05/03/14
[LIST]
[*]PA Version updated. Now it is 4.1 :D
[*]Experimental Wifi Fix
[*]PA source code updated
[/LIST]
23/02/14[LIST]
[*]Recovery works
[*]Root works
[*]PA source code updated
[/LIST]
09/02/14[LIST]
[*]OMX FIXED
[*]Camera Works
[*]PA source code updated
[/LIST]25/01/14
[LIST]
[*]AOSPA source updated
[/LIST]
Note:-
[LIST]
[*]NO OMX
[*]No HALO
[/LIST]
17/01/14[LIST]
[*]AOSPA Source updated
[/LIST]
01/01/14[LIST]
[*]Initial Release
[/LIST]
XDA:DevDB Information
Paranoid Android {AOSPA} 4.6 , ROM for the Samsung Galaxy S Advance I9070
Contributors
Chirag_Galani
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: 4.1.2 JellyBean
Version Information
Status: Stable
Created 2014-01-01
Last Updated 2014-10-03

---

Download links:-
ROM:-
Download Link: http://forum.xda-developers.com/devdb/project/dl/?id=8918&task=get
PA Gapps:- http://forum.xda-developers.com/showthread.php?t=2397942
Add Ons:
Official AOSPA Boot Animation : http://forum.xda-developers.com/devdb/project/dl/?id=7196
Place it in /system/media
Older versions:-
ROMS:-
Check Downloads Section of this thread.
http://goo.im/devs/Chirag_Galani/Janice/PA_4.4
01/01/14
ROM:- http://www.mediafire.com/download/ahvbq218m158yym/pa_janice-4.0-BETA-20131231.zip
1st Boot takes time to boot 5-10 mins
Screenshots:-

---

Reserved
Bugs:-
1)Same as CM11
Note:- If you use any other Gapps except AOSPA Gapps then PA OTA will force-close as it fails to detect and give updated version of the PA Gapps.

---

credits
Credits ->
@ ParanoidAndroid Team for this ROM
@ Team Canjica
@frapeti for helping me.
@KINGbabasula for helpeing me
@shut_down for supporting me
@Koulis2000 for supporting me
@joehanh88 for supporting me
@mykimouse for helping me
@diego-ch for debugging a severe error.
***DISCLAIMER***​I CLAIM NO RESPONSIBILITY FOR ANY DAMAGES THAT MAY OCCUR​

---

this rom is missing the "settings pac" or am I wrong?

---

zamurai x said:
this rom is missing the "settings pac" or am I wrong?
Click to expand...
Click to collapse
This is paranoid android rom so the possibility of PAC STUFF is not possible...
PAC 4.4 ROM will be built by @KINGbabasula
Sent from my GT-P3100 using Tapatalk

---

khalldeveloper said:
Good work... but A lot of bugs,
Click to expand...
Click to collapse
Ya this ROM is still in Alpha Stage
kralkral said:
good work but u can use Macław-Team cm11 as base so we will not have bugs
Click to expand...
Click to collapse
That's against the spirit of Open Source nature of Android.
Tesla-MADAL93 said:
This ROM is compiled from sources, and we don't have Maclaw sources/patches. Using the libraries from another ROM, mixing up Canjica's source based components/libraries with Maclaws's makes this not fully "clean" (not for "Original Android Development")
Inviato dal mio GT-I9070
Click to expand...
Click to collapse
Thanks man.

---

Mod Edit
Thread cleaned.
Can we please get onto the topic of this ROM,and leave all the other chat to a thread in General or something.
Thank you
malybru
Forum Moderator

---

where is boot animation ? Oo
false alarm .. xD
edit 2 , i got bootloop

---

iiD4x said:
where is boot animation ? Oo
false alarm .. xD
edit 2 , i got bootloop
Click to expand...
Click to collapse
It takes very long to boot.
Have patience bro...

---

Chirag_Galani said:
It takes very long to boot.
Have patience bro...
Click to expand...
Click to collapse
30 min -.-
i get back to carbon .
why it takes so long ?

---

iiD4x said:
30 min -.-
i get back to carbon .
why it takes so long ?
Click to expand...
Click to collapse
Did you follow the procedure exactly as mentioned in OP?
Sent from my GT-P3100 using Tapatalk

---

Chirag_Galani said:
Did you follow the procedure exactly as mentioned in OP?
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
yes , twice
but i cant use UKF , it says unsupported device , im in Carbon 4.4.2

---

iiD4x said:
yes , twice
but i cant use UKF , it says unsupported device , im in Carbon 4.4.2
Click to expand...
Click to collapse
So you didn't use ukf..??
Therefore no boot.img was flashed then you will get bootloop only.
Then too I'll try once again tomorrow

---

Chirag_Galani said:
So you didn't use ukf..??
Therefore no boot.img was flashed then you will get bootloop only.
Then too I'll try once again tomorrow
Click to expand...
Click to collapse
so i can flash it on CM11 based roms ?
UKF wont work on CM11 roms , it says unsupported device .
and i tried with stock , i go back to stock and use UKF . same result .

---

iiD4x said:
so i can flash it on CM11 based roms ?
UKF wont work on CM11 roms , it says unsupported device .
and i tried with stock , i go back to stock and use UKF . same result .
Click to expand...
Click to collapse
I am planning to update very soon and if not then too I'll flash rom as per the instructions and report back tomorrow
Sent from my GT-P3100 using Tapatalk

---

iiD4x said:
so i can flash it on CM11 based roms ?
UKF wont work on CM11 roms , it says unsupported device .
and i tried with stock , i go back to stock and use UKF . same result .
Click to expand...
Click to collapse
As i told u, the rom boots u didn't follow the procedure.. -_-
Uploading screenshot as a proof in 5 mins
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

---

Chirag_Galani said:
As i told u, the rom boots u didn't follow the procedure.. -_-
Uploading screenshot as a proof in 5 mins
Click to expand...
Click to collapse
so , im on Carbon 4.4.2 what exactly i need to do ?

---

iiD4x said:
so , im on Carbon 4.4.2 what exactly i need to do ?
Click to expand...
Click to collapse
I flashed on CM 10.2 So try that way. and report back.
Sent from my GT-P3100 using Tapatalk

---

Chirag_Galani said:
I flashed on CM 10.2 So try that way. and report back.
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
after Samsung logo , i got black screen ! -.-