Hello I got this tablet Prestigio - PMP7280C3G V4.2.2 back in November, December time and I am wanting to Root it.
From a post I did back then on another website a user replied that he got it working and rooted using a method on a website into which here's the Instructions translated into English below....
-
Testing the current model PMP7280C3G_DUO with FW 1.0.05 and 1.0.07
Installing CWM :
First Tablet Do NOT let it lie somewhere near you will need it .
Second Download and unzip the file . PMP7280C3G_QUAD-recovery-flash.zip | Ulo?.to password : 7280
3rd Open Device Manager on the computer to turn off the tablet and connect the cable to the PC for a while, the new device
( MT65xx preloader ) right click update driver (if 2x click left to open the info on the device and select Update Driver )
and manually install the driver " MediaTek preloader USB VCOM Port " from the Drivers folder depending on your version of
Windows (tested on XP and Win7 32bit and 64bit ) - If does not happen the first time you just disconnect and reconnect
tablet , again captured the moment on the device.
4th Unplug the tablet and start Flash_tool.exe
5th Right click on a scatter - loading and set the path to the directory / PMP7280C3G Recovery
CWM/MT6589_Android_scatter_emmc.txt and let Open.
6th Up in a menu icon you click on a download in the following confirm with YES you want to continue .
7th Connect the tablet off - starts by itself recovery download to your tablet . Can now be two situations ; endings Will
a download window with a green circle . A second variant or passes first the download and install the computer starts by
itself another driver " MediaTek DA USB VCOM Port" and flash program throws an error . Not to worry if you just unplug the
tablet itself on off it and click again to download again, click YES to connect off tablet . Ted would arrive melo
successful recovery in tablet and confirmation will be green ring in a new window.
8.Odpojte cable from the tablet and hold the VOL + and Power 3 seconds and you are in CWM recovery .
ROOT :
First In the ROOT folder is a file Supers - v1.65.zip and upload the memory card or tablet.
Second Run the recovery and select "install zip from sdcard" then select a location where you want the file to install
depends by location " choose zip from sdcard " and " choose zip from internal sdcard " you will find include file and
press power.
3rd select reboot system
That's all .
Way back in the state with Origami recovery without root if required :
Approach, as well as with CWM just place ingredients into CWM Recovery Route to Recovery folder Origo . The rest is the
same. In the tablet to run the application supers and remove root data settings .
THNX :
XDA for Supers - v1.65.zip
-
-
-
Now from the above I have downloaded the files Turned off the Tablet gone into device manager and plugged in the cable from the Tablet to the USB-Port of my laptop. It says in the steps above in step 3 that a new device ( MT65xx preloader ) should show up but it doesn't not in device manager not even on my computer now is that because the tablet is turned off also when its off and plugged in it's just charging.
Also when I got this Tablet I already hooked it up to my laptop to put music onto the tablet and photos so does that mean I need to turn the tablet on and uninstall anything that is to do with the Tablet in device manager then go from step 3 again - Does anyone know if that sounds about right since the new device ( MT65xx preloader ) in device manager doesn't show up yet with it's turned off and plugged in.
Any help will be Massively Appreciated.
Related
Hi Everyone,
I know there are stupid people out there like myself that bought a crapy chineese tablet with model msm7227 shown that would like to know how to root the phone. Installing the Gingerbreak apk file and running it seems to do the trick.
I tried to take it a step further and upgrade the android version from 2.2.2 to 2.3.3 following instructions from a russian site that I translated.
Russian site link:
ublaze.ru/forum/ftopic1158.html
I translated the instructions in the website below. Refer to pdf attachment for instruction and pics:
Unfortunately I only managed to go as far as Step 3 G. Click Start to update ARM9.
Your tablet will automatically reboot after the upgrade.
For me after I click start the status changes indicating that it is Changing the Phone to Download Mode
It then switches off the unit and loses the com connection to the phone and the status changes to "Attempting to run Flash Programmer"
It fails then with the status "Software Download Aborted" Error "Could Not Communicate with Flash Programmer". I try an restablish the connection during the status "Attempting to run Flash Programmer" but it makes no difference.
So I have pretty much left it there. If any one else is game to give it a go and have better luck good luck. My unit still works after I reset it but its still on Android 2.2.2.
INSTRUCTIONS
Характеристики QUALCOMM MSM7227 FFA 3g
Код: Выделить всё
QUALCOMM MSM7227-1 Tablet PC with Mobile Phone function
Android 2.3 OS
512MB RAM +4GB Flash Memory
7 inch capacitive multi-touch screen
Built in 3G module and WiFi and bluetoothBuilt in GPS navigation
Built in 2.0MP/0.3 CMOS dual cameras
Support phone call and flash10.1 playing
ID устройства:
USB\Vid_05c6&Pid_9018&Rev_0226&MI_00
USB\Vid_05c6&Pid_9018&Rev_0226&MI_01
USB\Vid_05c6&Pid_9018&Rev_0226&MI_02
The firmware consists of 4 steps.
Step 1. Zhelateono have a PC running Windows XP, but I probyval and Windows 7 32-bit also works.
Step 2. Installing the USB driver
рис. 1
If the popup window does not appear automatically, go to the Device Manager> Other Devices
and click the right mouse button on the label Qualcomm HSUSB Device and select> Update Driver
pointing the way to the drivers for each Qualcomm HSUSB Device (see Fig. 2) as follows (see Fig. 1)
рис. 2
Step 3. update ARM9
A. Turn the tablet and connect it to your computer.
B. Go to Device Manager and check that, if the operating system your computer has defined the tablet (see Figure 3.)
рис. 3
C. Installing the program QPST.
рис. 4
D. Click Start, and then click the QPST Configuration. Add all the ports that are able to find (see Fig. 5)
рис. 5
Navigate to the Software Download tab and remove the check mark from C Auto Backup/Restore
рис. 6
рис. 7
Click Start clients and select Software Download, and then click Multi-image.
Click Browse and specify the correct path to the image (image).
Код: Выделить всё
...\Reflash Software\ARM9\image
Click Advanced, select the AMSS Apps Boot Ldr Hearder and AMMS Apps Boot Loader, then click OK
рис. 8
The tab Multi-image, uncheck Auto Backup / Restore
рис. 9
G. Click Start to update ARM9.
Your tablet will automatically reboot after the upgrade.
Step 4. update ARM11
A. Make sure your tablet is connected to your computer via USB-cable.
B. Open ... \ Reflash Software \ Android_Download_tools \ Arm11 V1.7_20110418 \ Android_download.exe
C. Click Connect and verify that the displayed fastboot device
D. Press the volume (Volume) and the power button, and then click the Reset button (Reset)
E. Hold down the volume (Volume) and the (what exactly, the instructions are not written - most likely the trigger) and then, in the program, click Connect again.
And then start flashing.
F. Click Run and wait for as long as see the word Done!!!
рис. 10
G. In this update is completed.
Note. If your tablet does not flash, as I have, in some cases, do the following:
1. Take the sd card and dump the sd card to the root of the archive here: update.zip
2. Insert the sd card into the tablet.
3. Hold the power button and press vol -.
4. Without releasing the two buttons we press on reset clip (located just below the buttons vol -)
Next tablet should enter into recovery mode, that's how it looks:
5. Next, we need to press the Home button (Home)
6. C Use the "vol +" and "Vol -" go to the inscription:
code: Выделить всё
apply sdcard:update.zip
and press the touch button with the four squares (just below the button home)
7. Upgrade process will start. At the end of reset the unit.
Download the firmware for Ipad QUALCOMM MSM7227 FFA 3g
Скачать прошивку для Ipad QUALCOMM MSM7227 FFA 3g
Use this tool to root it : http://www.only4download.com/2012/05/download-superoneclick-android-software.html
Don't forget the THANKS button
You Biscuit!!!!
Thanks guys for helping me to flash my device!!! Running 2.3 with full marketplace. WOO HOO!!!
Ok I had managed to root it before finding your post. ( I think it was UnversalAndroot if memory serves me right - tried so many! )
Used Chrome to translate the original Russian page to English. The USB drivers and the quickboot drivers are all in the file listed on that site. (2.3 software ) I used a Windows XP workstation to connect the device and load the drivers.
To get the device into fastboot:
turn on while holding the Volume UP + button. You should see the android robot.
Connect to PC and install the ADB driver.
Run the Android_download.exe and let it do it's magic. The device will reboot twice and will show a new logo on rebooting. ( at this point I installed the standard USB drivers )
The device will default to Chinese language. Find the settings icon ( blue rings on black ) and look for the icon with an "A" on it.
The network does not work - I assume its because of my region ( South Africa GSM 900 / 1800 / 2100 ) and something is missing in the drivers. It no longer detects a SIM or network.
At least I have a device that resembles a proper Android device now! Time will tell if it's any more stable than the brickware it came with.
Please don't ask me too many technical questions - I'm not a pro by any means!
Thanks
Finally
Finally found the time to get around to trying the flashing to Android 2.3.3 again.
It all worked great this time round. The issue I was having with installing the ARM 9 update was that everytime it changed the unit to download mode and rebooted it, the COM port would change and lose connecitvity after the reboot. But once I used the browse button in the QPST Configuration application and changed the port to match the new port allocated after the reboot it successfuly transfered the software across without the error.
Its so great now that the unit has Android 2.3.3 as now all the following things have been fixed and verified working
1) 3G data works properly now with Telstra
2) Phone and messaging works with Telsta
3) I dont get face book error in the news read section
Theres still a few android apps that are not compatible with the device like, Adobe Flash player but there are suitable alternatives.
But now its a nice workable unit. Very Happy :>
Some error has been solved
saintlypaul said:
Finally found the time to get around to trying the flashing to Android 2.3.3 again.
It all worked great this time round. The issue I was having with installing the ARM 9 update was that everytime it changed the unit to download mode and rebooted it, the COM port would change and lose connecitvity after the reboot. But once I used the browse button in the QPST Configuration application and changed the port to match the new port allocated after the reboot it successfuly transfered the software across without the error.
Its so great now that the unit has Android 2.3.3 as now all the following things have been fixed and verified working
1) 3G data works properly now with Telstra
2) Phone and messaging works with Telsta
3) I dont get face book error in the news read section
Theres still a few android apps that are not compatible with the device like, Adobe Flash player but there are suitable alternatives.
But now its a nice workable unit. Very Happy :>
Click to expand...
Click to collapse
I have solved some error when update rom for it. I attached it from file word
HELP ERROR update ARM9
Hi, I have a problem when star the process appear in red NAK: Invalid Address
I have read the manual 6 times and nothing, please how I can fix this error
Same Error
Hi
I am getting the same error as yours.
Where you able to move ahead an upgrade the tablet to 2.3 ?
Hey,
I have been years just reading these forums but never made any posts, so thats why I cannot post to development section anyways. I happened to totally brick my phone by flashing wrong preloader into it. However this morning i succesfully reflashed it and now I have somehow working phone (just need to find new rom now) but anyways. This thread is to help other people who has semi bricked their phones as well.
Current situation.
-Phone doesn't charge,
-Phone doesn't turn on (nothing happens)
-Computer sees phone for few secs, so you have "META mode" access. If your computer doesn't see your phone at all make modified USB connect the 4pin to ground. This is what I did actually. If that doesn't work you can google for test points.
My device:
MTK6575 (Fake mt6589)
512MT RAM (fake 2GB)
800x460 resolution (fake 1920x1080)
4GB internal memory (fake 8gb)
5" screen
2200mah battery (fake 3000mah)
OK this is the prodecure that got my phone back to live!
Install windows XP (Yes, windows 8 didn't work for me. most likely drivers are not ready for it. I will not write steps how to install windows xp)
Install USB deview
-Google it, download it, extract package and run it
-Remove all drivers related to Mediatek, android, usb vcom etc.
Download and install VCOM USB Drivers
-Download these drivers http://www.mediafire.com/download/31nddwqdot5ajp2/MT6575+USB+VCOM+drivers.zip
-Put your phone battery in (50% charge) required. wait 10s. Take battery off and connect your phone to PC as meta mode ( modified USB cable, VOL+/- while connecting, you can read more about this from here: http://forum.xda-developers.com/showthread.php?t=1943442
-When your phone is connected it will disconnect after ~3-5seconds. Now you have to wait in device manager connect the phone right click the device when it shows up. Install driver from the location where you unpacked your VCOM USB drivers/2K_XP_COM/ dont automaticly install them but manually. After windows have found drivers UNTICK show compatible devices. And MANUALLY select preloader driver. Now it will install it the next time the device connects. OK now we have Preloader driver in place. Notice that we will install one more driver later needed in flashing procedure. Disconnect phone.
Now download compatible rom. for me My backup was not working, but this rom worked out perfectly:
http://search.4shared.com/postDownload/wILsUT7J/MTK6575_S4_FLASH_TOOLS_YEDEK.html
Download SP Flash Tool v3.1222.00, extract it.
Ok lets recap what we have now:
-preloader drivers
-phone disconnected
-SP Flash Tool v3.1222.00
-back up we can use to flash
Open flash tool, enter scatter file and go to Format
-Select Format whole flash except bootloader and nvram bin region. -> connect phone -> succeed
-Select Format NVRAM bin region ONLY -> connect phone -> succeed
-Select Format whole flash -> connect phone -> succeed
Ok. Next we need to flash compatible rom this part is tricky. Read before doing anything.
-Disconnect your phone, enter battery (50% charge required)
-wait atlaest 15seconds, and remove battery
-(I dont know why those steps were required, but didn't work without it)
-Open SP Flash tool select scatter file and select all checkboxes
-press download
-connect your phone in META mode with Preloader drivers we installed before.
-Now red prograss bar will start going and phone will disconnect After it reconnect We want ANOTHER drivers are located in the same place but now we need to select Mediatek DA Vcom USB drivers. If everything went fine you get yellow progress bar and it will reflash your phone! :victory:
In the last part if you got Error 5054, This is good. It means your phone is still alive! but your current preloader does not match the data you are going to flash. So you need to go back to google and download other rom try flashing everything (thats what I did, before hitting jack pot, eventually you will find compatible rom)
If you got ERROR 3002 switch back to SP Flash Tool v3.1222.00 newer one doesn't work!
I got some other errors as well when flashing and I solved them but didn't write down the errors so I cant remember them sorry
Remember before connect phone as META mode. Plug in battery with atlaest 50% power wait 15s. remove it. and connect the phone to PC. This was the mysterious step I was missing when struggling with this 5 days!
By the time of writing this article I got my phone working rom, everything works.
GOOD LUCK
ps. Sorry for typos.
:angel: kthxbai
thanks!
AND THANKS FOR yuweng and rui1 who made this all possible!
anyway now I'm back to porting CM to our device. hopefully this helped somebody (and yes, I will be more careful this time)
Hi, it worked for me and i could unbrick my mtk6575
Hi, there
rom given in post worked for me
and i could finally unbrick my phone, but now it asks for the password to decrypt storage after boot. I don't know what to do.
please provide password or any solution to it.
my device is stuck on boot?
Havunen said:
Hey,
I have been years just reading these forums but never made any posts, so thats why I cannot post to development section anyways. I happened to totally brick my phone by flashing wrong preloader into it. However this morning i succesfully reflashed it and now I have somehow working phone (just need to find new rom now) but anyways. This thread is to help other people who has semi bricked their phones as well.
Current situation.
-Phone doesn't charge,
-Phone doesn't turn on (nothing happens)
-Computer sees phone for few secs, so you have "META mode" access. If your computer doesn't see your phone at all make modified USB connect the 4pin to ground. This is what I did actually. If that doesn't work you can google for test points.
My device:
MTK6575 (Fake mt6589)
512MT RAM (fake 2GB)
800x460 resolution (fake 1920x1080)
4GB internal memory (fake 8gb)
5" screen
2200mah battery (fake 3000mah)
OK this is the prodecure that got my phone back to live!
Install windows XP (Yes, windows 8 didn't work for me. most likely drivers are not ready for it. I will not write steps how to install windows xp)
Install USB deview
-Google it, download it, extract package and run it
-Remove all drivers related to Mediatek, android, usb vcom etc.
Download and install VCOM USB Drivers
-Download these drivers http://www.mediafire.com/download/31nddwqdot5ajp2/MT6575+USB+VCOM+drivers.zip
-Put your phone battery in (50% charge) required. wait 10s. Take battery off and connect your phone to PC as meta mode ( modified USB cable, VOL+/- while connecting, you can read more about this from here: http://forum.xda-developers.com/showthread.php?t=1943442
-When your phone is connected it will disconnect after ~3-5seconds. Now you have to wait in device manager connect the phone right click the device when it shows up. Install driver from the location where you unpacked your VCOM USB drivers/2K_XP_COM/ dont automaticly install them but manually. After windows have found drivers UNTICK show compatible devices. And MANUALLY select preloader driver. Now it will install it the next time the device connects. OK now we have Preloader driver in place. Notice that we will install one more driver later needed in flashing procedure. Disconnect phone.
Now download compatible rom. for me My backup was not working, but this rom worked out perfectly:
http://search.4shared.com/postDownload/wILsUT7J/MTK6575_S4_FLASH_TOOLS_YEDEK.html
Download SP Flash Tool v3.1222.00, extract it.
Ok lets recap what we have now:
-preloader drivers
-phone disconnected
-SP Flash Tool v3.1222.00
-back up we can use to flash
Open flash tool, enter scatter file and go to Format
-Select Format whole flash except bootloader and nvram bin region. -> connect phone -> succeed
-Select Format NVRAM bin region ONLY -> connect phone -> succeed
-Select Format whole flash -> connect phone -> succeed
Ok. Next we need to flash compatible rom this part is tricky. Read before doing anything.
-Disconnect your phone, enter battery (50% charge required)
-wait atlaest 15seconds, and remove battery
-(I dont know why those steps were required, but didn't work without it)
-Open SP Flash tool select scatter file and select all checkboxes
-press download
-connect your phone in META mode with Preloader drivers we installed before.
-Now red prograss bar will start going and phone will disconnect After it reconnect We want ANOTHER drivers are located in the same place but now we need to select Mediatek DA Vcom USB drivers. If everything went fine you get yellow progress bar and it will reflash your phone! :victory:
In the last part if you got Error 5054, This is good. It means your phone is still alive! but your current preloader does not match the data you are going to flash. So you need to go back to google and download other rom try flashing everything (thats what I did, before hitting jack pot, eventually you will find compatible rom)
If you got ERROR 3002 switch back to SP Flash Tool v3.1222.00 newer one doesn't work!
I got some other errors as well when flashing and I solved them but didn't write down the errors so I cant remember them sorry
Remember before connect phone as META mode. Plug in battery with atlaest 50% power wait 15s. remove it. and connect the phone to PC. This was the mysterious step I was missing when struggling with this 5 days!
By the time of writing this article I got my phone working rom, everything works.
GOOD LUCK
ps. Sorry for typos.
:angel: kthxbai
Click to expand...
Click to collapse
my rooted mt6575(spice mi-315) device stuck on boot logo. i also tried clar cache and wipe all data bt still same boot logo appear . i am going to ur theard when i format whole flash except bootloader and navram. and connect my device to pc and error occured.....
does some know where to find a latest rom for my mtk 6575(samsung glx,y grand duo hard copy) plz i really need 1
google play service was not working so i uninstalled it to intall a proper vrsion but when i try install it from google play store it says imcompatible with same shared id what can i do plz hlp me coz some of my apps and game r not working...
gapps and cwm problems
soulindub said:
google play service was not working so i uninstalled it to intall a proper vrsion but when i try install it from google play store it says imcompatible with same shared id what can i do plz hlp me coz some of my apps and game r not working...
Click to expand...
Click to collapse
Quote:
Originally Posted by Snekhers
I need this informations roms!
Screen : 540x960
BB Chip : MT6577
Ms Board : Glaxy S3
IMEI1 : XXXXXX
IMEI2: XXXXXX
Modem Ver. : MAUI.11AMD.W11.50.SP.V12. 2012/09/20 18:56
Bar code : 030801050804260123456788.81_20390210
Build Time : 2012 10 17 15:02:47 CST
UBoot Ver. : 2010.06
Kernel Ver. : 4.1.1
SW Ver. : ALPS.ICS.MP.V2.6
Custom Build Verno. : 005121017
hi, a have same phone and is it possible update new rom? Why? Because thşs rom very stable but one except, google contacts cant sync.
And i m trying cwm install with MTKdroid tools its runing but ONLY ONE TAKE. After the reboot in CWM menu coming orginal factory recovery(yellow simple screen and only have test etc. menus) why? ((
Hi all.
I received my prestigio pmp 5297c with 4.2 preinstalled. I tried to find a way to root it but without any success.
Any idea would be valuable.
Thanks.
Sent from my PMP5297C_QUAD using xda app-developers app
Rooting problem PMP 5297C QUAD SOLVED
Hi,
I found a solution thanks to this web site:
http://androidforum.cz/viewtopic.php?f=815&t=48237
Translate it with google translate to english. I had some problems installing the right driver on my windows 7 x64 machine but I succeeded.
Basically it goes like this:
1. Download the zip from the link on the web page and unpack it.
2. Start the RKAndroidTool.exe (in the status bar it will say "No found RKAndroid rock usb")
3. Shut down your tablet and disconect the usb cable from the tablet that is connected to your pc.
4. Press the volume up button and hold it for 6 - 7 secconds.
5. Still holding the volume up button plug in the usb cable that is connected to You pc. (At this point in my case nothing happened)
6. (If nothing happens) Go to control panel - device manager and there You will see an unknown device.
7. Right click on the unknown device and select update driver. Point to the folder where You unpacked the downloaded zip / Drivers folder and select the search in subfolders checkbox. press OK button. Windows will install the drivers. After that if the tablet didn't start automatically boot it up by pressing the power button.
8. The RKAndroidTool.exe now will recognize the device.
9. Set the checkbox next to rom/recovery.img and press "RUN"
10. The tool will do what it has to do.
From here on just follow the instructions for rooting the tablet from the website.
Hope it will work for You as it worked for me.
Regards
Just use King root from Play Store
Hi,
I have received a Lenovo P 780 from Amazon after a long wait which was I guess a Chinese made phone. When I go to Google play I get only Chinese apps & also all system software from Lenovo are in Chinese language I cannot use whats app since it does not recognize my number and also it does detect my current city to show weather update.. I dont want to return this phone as it takes many days to return and get a new phone some one please assist me thanks in advance
Syed Moin said:
Hi,
I have received a Lenovo P 780 from Amazon after a long wait which was I guess a Chinese made phone. When I go to Google play I get only Chinese apps & also all system software from Lenovo are in Chinese language I cannot use whats app since it does not recognize my number and also it does detect my current city to show weather update.. I dont want to return this phone as it takes many days to return and get a new phone some one please assist me thanks in advance
Click to expand...
Click to collapse
Flash a ROW(rest of the world) ROM forom this forum. Your phone will be more understandable.
Sent from my Lenovo P780
stympy said:
Flash a ROW(rest of the world) ROM forom this forum. Your phone will be more understandable.
Sent from my Lenovo P780
Click to expand...
Click to collapse
Perfect can you please give me the steps that I should follow flash the phone with ROW apologies I'm new to these things..
Syed Moin said:
Perfect can you please give me the steps that I should follow flash the phone with ROW apologies I'm new to these things..
Click to expand...
Click to collapse
Ok here it is:
1. download in your computer the drivers
2. install drivers
3. restart your computer (just to be sure) (skip steps 1.2.3 iff you have allready installed drivers)
4. now... turn off your phone
5. plug your USB cable in your computer
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart start flash tool
10. load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL)
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON)
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. iff the firmware is not starting remove the case of your phone and hold pressed the little red button for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
17. disconect your phone and power on your phone
18. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
19 Good luck.
stympy said:
Ok here it is:
1. download in your computer the drivers
2. install drivers
3. restart your computer (just to be sure) (skip steps 1.2.3 iff you have allready installed drivers)
4. now... turn off your phone
5. plug your USB cable in your computer
6. plug your USB cable in your phone
7. new hardware detected should appear... and should install drivers automaticaly
8. after the drivers are installed unplug your cable from the phone and restart your computer (just to be sure)
9. after restart start flash tool
10. load scatter file from ROM directory(should be target_bin directory)
11. check DA,DL WITH CHECKSUM (NOT OPTIONAL)
12. press Firmware Upgrade button (NOT DOWNLOAD BUTTON)
13. now just now plug usb cable to your phone.
14. firmware flash should start.(some red and other color lines should appear)
15. iff the firmware is not starting remove the case of your phone and hold pressed the little red button for about 20 seconds then release. All this must be done with cable pluged in to your phone.
16. after flash is done a green circle should appear
17. disconect your phone and power on your phone
18. lenovo logo should appear. then you should be pacient because it will took some time before android boots for the first time.
19 Good luck.
Click to expand...
Click to collapse
Hi,
Thank you so much for your help I tried doing that and step 15 does not complete. The phone is not getting detected I believe I installing MTK drivers but no luck when phone is connected to system in Device manager it show other devices and MTK driver with an ! mark but with in few seconds it goes off. I tried with many times but enabling all USB options from my phone. I will really appreciate your assistance thanks in advance.
Syed Moin said:
Hi,
Thank you so much for your help I tried doing that and step 15 does not complete. The phone is not getting detected I believe I installing MTK drivers but no luck when phone is connected to system in Device manager it show other devices and MTK driver with an ! mark but with in few seconds it goes off. I tried with many times but enabling all USB options from my phone. I will really appreciate your assistance thanks in advance.
Click to expand...
Click to collapse
I did it thanks to full updating the steps in details:victory:
Syed Moin said:
I did it thanks to full updating the steps in details:victory:
Click to expand...
Click to collapse
Sooo... it is working then..
Glad to help. :laugh:
For all of you out there having Iconia B1-710 in boot loop or hard bricked, this is the way to fix it.
I'm not responsible to any damage you got when following the instructions.
!!!YOUR WARRANTY WILL VOID!!!
This will fix SPFT errors 2004, 6010, 1010.
At this moment I'm not able to upload files so contact me over email: [email protected]
First of all, read this entire post and make sure that you have MediaTek DA USB VCOM drivers installed.
If not do this:
1. Extract all files from the archive and run every program as administrator.
2. Disconnect the tablet from the PC, remove the back cover and pull off the battery connector.
3. Open device manager and expand Ports (COM&LPT) selection
4. Connect the tablet to the PC and right click on any new shown device. If it's reconnecting don't worry, you just need to be fast and right click it and select Update Driver Software.
5. Click on Browse my computer for driver software and click Let me pick from a list of device drivers on my computer.
6. Uncheck Show compatible hardware and from the shown list find and select only MediaTek DA USB VCOM. If MediaTek DA USB VCOM is not shown you didn't installed the drivers correctly.
DISCONNECT THE TABLET FROM THE PC AND DO NOT PUT BACK THE BATTERY CONNECTOR
1. Now open SPFT and select the scatter file.
2. Click on window and then Write memory
3. In memory settings select EMMC.
4. Click Open Raw Data and select secuoff.img
5. In Begin address write 0x1F88000 and in Container Length write 0x427100
6. Click Write memory and connect the tablet. Green circle should appear.
7. Now go back to download selection and make sure that everything is selected (including preloader and dsp_bl).
8. Press download. If everything was good you should see a green circle.
9. Remove the USB cable and put the battery connector back and back cover to place.
DO NOT TURN IT ON. CONNECT IT TO CHARGER AND LEAVE IT ABOUT 15 MINUTES TO CHARGE.
how to fix tab
i have acer b1-710 tablet that keeps restaring can i use this guide to fix it ?
Hi Daniel !! First of all, THANK YOU !!
I've used this guide to revive my HARD BRICKED tablet Acer Iconia B1-A71 and it worked like a charm !!!
I followed step by step your guide using B1-A71 original stock firmware's files.
So I came back to your post just to say THANK YOU VERY MUCH SIR !!!
I know this is an old thread, but you saved my life and it's never late to say thank you
Greetings,
Seba
hey....the firmware i downloaded does not contain scuofff.img file...can u give a link of a firmware that has one ??
I have Iconia B1-711 in boot loop (I think hard bricked) .
I think i have the corect drivers and the "SP_Flash_Tool_v5.1628"
Dose anyone have the scatter , the secuoff.img and the other files ?
Can Anybody give the required files please
secuoff file
Hi, I trying to follow your instructions but where can I find that secuoff.img file.
hello, could someone pass me the necessary files for the B1-710, thanks