Hello all,
I've encountered a problem with my Straight Talk Galaxy S II S959G after flashing the CWM from this thread:
http://forum.xda-developers.com/showthread.php?t=2559694
I was running 6.0.1.2 or something along those lines. And I was running the 4.2.2 SuperNexus ROM. I can only get to the Samsung Galaxy S II screen and then it goes blank, but does not shut off, as my computer recognizes as being on. However, I cannot DO anything with it even though it can be connected to my computer. Odin v1.85 does not seem to recognize it either.
If someone could help, it would be much appreciated.
It sounds like you just have a soft brick if you're still getting the Samsung logo.
ODIN is intended to be used in download mode. Are you able to get into download mode (hold vol +/vol -, then plug in the USB cable)? If so, you should be able to reflash the kernel, assuming that's what broke. I like to keep an ODIN flashable full stock ROM (minus bootloaders) handy in the event that I mess things up badly.
I don't have experience with the specific ROM you are trying to flash (I was actually planning on playing around with that one soon).
jpasher said:
It sounds like you just have a soft brick if you're still getting the Samsung logo.
ODIN is intended to be used in download mode. Are you able to get into download mode (hold vol +/vol -, then plug in the USB cable)? If so, you should be able to reflash the kernel, assuming that's what broke. I like to keep an ODIN flashable full stock ROM (minus bootloaders) handy in the event that I mess things up badly.
I don't have experience with the specific ROM you are trying to flash (I was actually planning on playing around with that one soon).
Click to expand...
Click to collapse
I'm not very experienced with all of this, but, I have tried Odin mode. My computer does not recognize my phone when it is plugged in.
I do have the stock rom that my phone came with too, but I do not have a Samsung official USB cable to use with it, which, supposedly, is required for this to work. And I do not know if my Odin version on my computer is outdated either.
Epications said:
I'm not very experienced with all of this, but, I have tried Odin mode. My computer does not recognize my phone when it is plugged in.
I do have the stock rom that my phone came with too, but I do not have a Samsung official USB cable to use with it, which, supposedly, is required for this to work. And I do not know if my Odin version on my computer is outdated either.
Click to expand...
Click to collapse
Many usb cables will work just fine. The original cables are known to be of good quality. Odin3 v1.85 is recommended for this phone, although any version of Odin should work.
Did you open Odin on the desktop before putting the phone into download mode? Sometimes the problem is as simple as wrong sequence.
If you have a USB jig, use that to put the phone into download mode. Then connect it to the computer while Odin is open on the desktop.
Make sure you have the correct driver installed. You should have "SAMSUNG USB driver for mobile phones" in your add/remove programs dialog in windows. If not, install it. If so, uninstall it, reboot, reinstall it.
Try different cables, different usb ports, even different pc's.
I'll try not to butt in too much, since creepyncrawly obviously has a lot of experience.
(at this point, I'm assuming you're on Windows)
Like he said, it's sounds like it's most likely a driver issue. When you first plugged in the phone, did you get a Windows balloon notification saying "Installing drivers"? If you open up device manager, do you have any devices with an exclamation point next to them, indicate a device that failed to start? If so, make sure the Samsung drivers are installed.
A USB jig is definitely nice to have handy. I use this one (as long as you can wait a few weeks on shipping). If you can get into download mode, your bootloaders are probably safe (meaning you should be able to recover easily).
I actually installed that CM11 ROM yesterday on my SGH-I777 (I can't say anything specific about your model and how it may differ, but it seems to basically be the same phone as the I777). I was running stock non-rooted JB 4.1 with stock recovery, so I had to take a little more of a convoluted route to get there.
In the end, here's the thread for you. Once you can get ODIN download mode working again, you should be well on your way to fixing it (flash CWM 6.0.4.5 from ODIN, boot into recovery, then try the ROM install again).
Well, I've tried flashing CWM again using Odin. While I actually can USE Odin this time, it just isn't working... My phone still only turns on and goes blank after the Galaxy S II screen.
I had something similar happen the other night when I flashed a kernel that was apparently incompatible with my Captivate (although it should have been fine). The phone would get stuck on the Galaxy S boot screen. I had to reflash a known good kernel to get it working again.
If you can get into the recovery, you can try a wipe/factory reset + wipe cache.
Is ODIN detecting the phone but just failing to flash the files? What error is it getting?
If ODIN is flashing the files properly, but still preventing full boot up, it's probably easiest at this point to flash back to a stock ROM. The previous thread link has the instructions and flash files (I personally have an S2, not an S959G, so it's a slightly different process).
Hi - I don't know if it is a completely outdated method, but this worked on my father's SII skyrocket yesterday when I was encountering a similar softbrick issue:
Get zadig (http://zadig.akeo.ie/), start zadig, get the phone in download mode, hit Options -> List All Devices, select the Samsung or similar device from the dropdown and replace the default USB driver.
Then use heimdall (http://forum.xda-developers.com/showthread.php?t=755265) to flash in a replacement recovery.
Double check that your phone is detected in download mode: heimdall detect
Then flash the recovery: heimdall flash --RECOVERY recovery.img (try CWM for your phone version)
(some places will have you add --no-reboot. that didn't work for me. let it auto reboot)
After it powers down, quickly disconnect the USB cable and put your fingers on the +/- buttons to get into recovery mode. From there push over whichever ROM via adb, etc. etc.
jpasher said:
I had something similar happen the other night when I flashed a kernel that was apparently incompatible with my Captivate (although it should have been fine). The phone would get stuck on the Galaxy S boot screen. I had to reflash a known good kernel to get it working again.
If you can get into the recovery, you can try a wipe/factory reset + wipe cache.
Is ODIN detecting the phone but just failing to flash the files? What error is it getting?
If ODIN is flashing the files properly, but still preventing full boot up, it's probably easiest at this point to flash back to a stock ROM. The previous thread link has the instructions and flash files (I personally have an S2, not an S959G, so it's a slightly different process).
Click to expand...
Click to collapse
It says Odin is successful, but still nothing happens. And I cannot get into recovery no matter how many times I try.
It seems flashing the stock ROM with Odin has worked now, but, now my phone has the tracfone start up animation just looping over and over.
Epications said:
It seems flashing the stock ROM with Odin has worked now, but, now my phone has the tracfone start up animation just looping over and over.
Click to expand...
Click to collapse
Boot into recovery and wipe caches; sometimes you have to do an extra wipe to get out of this type of bootloop.
SteveMurphy said:
Boot into recovery and wipe caches; sometimes you have to do an extra wipe to get out of this type of bootloop.
Click to expand...
Click to collapse
I'm having difficulties booting into recovery.
Epications said:
I'm having difficulties booting into recovery.
Click to expand...
Click to collapse
If you have the stock boot animation you should have recovery. Take the battery out, then put it back in and hold power+volume +/- until you get recovery. I have sometimes had to do this extra step after restoring stock.
Make sure your phone isn't plugged in while you're trying this, btw.
grand quattro CWM TRAPPED
Epications said:
Hello all,
I've encountered a problem with my Straight Talk Galaxy S II S959G after flashing the CWM from this thread:
http://forum.xda-developers.com/showthread.php?t=2559694
I was running 6.0.1.2 or something along those lines. And I was running the 4.2.2 SuperNexus ROM. I can only get to the Samsung Galaxy S II screen and then it goes blank, but does not shut off, as my computer recognizes as being on. However, I cannot DO anything with it even though it can be connected to my computer. Odin v1.85 does not seem to recognize it either.
If someone could help, it would be much appreciated.
Click to expand...
Click to collapse
HI BROOOO I M A GRAND QUATTRO USER EVERYTIME I SWITCH ON MY CELL MY CELL DIRECTLY GOES IN CWM MOD M WORRIED ALOT HELPPPPPPPPPPP ME
Related
I installed the latest nightly build (cm_galaxys2_full-88.zip) on my phone yesterday night and restored the all the apps through Titanium Backup. Everything was working fine until this morning I tried to create a backup using CWM recovery in Rom Manager. The phone shut down and has since been stuck on the initial boot screen (one with the Samasung galaxy S2 logo). It does not boot into recovery mode using the button combinations. I can only get it into download mode but Odin does not recognize it as I thing i forgot to enable USB debugging.
I have tried removing the battery and rebooting and also tried to access it through odin a number of times. But nothing seems to work.
What am I missing here ?
This might help?
mjondj said:
I cannot boot into recovery, but I can boot into download. However, odin is no longer recognizing my GS2 when I plug it into my PC.
The bootloop began when I was attempting to flash the cyanogen7 with the google apps.
I read every post in this thread, and have seen a number of people who cant boot into recovery, but can boot to download. I haven't seen anyone else mention that their phone is no longer recognized by odin on their pc.
Please help.
edit:
Perhaps odin doesn't see my phone because I didn't have USB debugging enabled? if that's the case, what can I do?
------------------------------------------------------------------------------------------------------------------
solved:
heimdall overwrites a driver and stops odin from seeing your phone. i attempted to remove it, unsuccesfully. but loaded odin onto a different computer (that had never seen heimdall).
i booted into download, connected to 2nd pc w/ odin, and ran CF-Root-SGS2_XW_NEE_KI8-v4.3-CWM4.tar (search forum) in PDA. this made my phone bootable again.
Click to expand...
Click to collapse
also check that you dont have kies running on your pc
icecreampop3 said:
This might help?
also check that you dont have kies running on your pc
Click to expand...
Click to collapse
Thanks. Although that did not do what I expected it to (due to some license issues), but it got me into recovery mode from where I could restore a Nandroid backup. Am back on RevolutionROM for now. Looks like CyanogenMod will have to wait for me.
I experienced the very same thing for the first time today. Had checkrom revolution and ran rom manager to backup and am now unable to boot into recovery/download. Will try to hook it to odin then
I was in the process of flashing back to GB in ODIN when it froze on flashing the Modem. Now the phone does nothing. Black screen. Plug USB in and computer doesn't know its there, Download mode will not work, nothing works.
Will a usb jig get it back into download mode so I can try flashing again or is this thing straight gone?
Thanks.
Yes, a USB jig will work.
MultipleMonomials said:
Yes, a USB jig will work.
Click to expand...
Click to collapse
Well I built one and tried it... No go. Nothing happened. Blank screen.
BTW the battery was fully charged right before it bricked so I know the battery isnt dead.
Was the phone on when you plugged it in?
I fixed it. Had to do the Unbrickable Mod. Was a pain in the butt getting the contact pads jumped. Once I got it I was able to get into download mode with the supplied programs and flash back to stock.
Nicely done.
Well I jinxed myself. I went to flash a new ROM and now im stuck on the Samsung Logo. Using the previous method does no good. Just stuck on Sammy logo. I found a different Heimdall One-Click now but it fails to flash Modem and now it vibrates 3 times when the sammy logo is shown.. over and over... so its in a boot loop I take it? If I 3 finger it it shows the stock recovery but I am unable to move up or down in recovery. It just stays on the reboot device selection.. im able to select that with the menu softkey thats it. The vol up and down and power buttons do not respond in recover. Updating the Modem is what started this whole mess for me. When I originally was flashing this the other day ODIN froze on flashing Modem, that put me in a hard brick state requiring me to do the Unbrickable Mod. I got it out of that with ED05 Heimdall Once-Click but since then I have not been able to get it out of this soft brick. My galaxy just wont let me win. :-(
Have you tried using One-Click Resurrector?
MultipleMonomials said:
Have you tried using One-Click Resurrector?
Click to expand...
Click to collapse
Ya, thats how I get it into Download Mode... its the Only way I can get it into download mode actually.
Both Odin and Heimdall are having trouble flashing the phone in windows. Both recognize the phone and connect but will not flash anything. They just sit at uploading PIT/Setting Partitions.
The ED05 Heimdall One-Click in linux flashes the phone with success's accross the board but the phone just sits there on the samsung logo... no vibrating, no recovery, and unable to charge the battery. If I use the EH03 Heimdall One-Click in linux it will flash all the way til it gets to flashing Modem but then fails and the phone is stuck in bootloop on the samsung logo vibrating 3 times over and over. It can also get into the stock recovery but im unable to move up or down the menu. Volume buttons have no effect. The phone will now charge though. Full battery as of right now.
I tried using Odin and Heimdall on another windows computer and they will not move past setting Partitons/uploading PIT either. SO I know there isnt a conflict with my computer.
I would like to try a manual flash in Heimdall Front-End in linux but I have no clue how to install it in Linux. I hate that command line stuff. I guess I have to figure it out though if Im going to try it.
OK, success!
I am now back to stock. I was able to run Heimdall in linux and flash CWM recovery. I was able to get into the recovery and make selections in recovery with the volume buttons. I selected reboot in download. I went to Odin and tried flashing a stock EH03 rom and it worked.... I think the reason I couldnt do that before was because i was holding the power button down to keep it in download mode since that is what is required when in download mode via the unbrickable mod.
The windows based programs must not have liked me holding that power button. Weird. Anyways its working.. now on to getting this thing updated.
im having a similar issue, i can get into cwm, can use download, but when i try using Odin for the stock eh03 it instantly says all threads completed succeeded 0 failed 0. when i reboot in cwm it just takes me to samsung logo wont go any further
Try heimdall.
Ya Heimdall in linux will surely give you a win.
EDIT: As I've now gotten Odin to flash again, and my device still won't boot, I'm really starting to think Andromeda's recovery has wiped something vital that isn't restored with a "regular" stock ROM image. PIT? EFS? Partitioning? Something like that? Odin successfully flashes the whole image tar (which I've previously used successfully), and the boot splash now correctly changes to the default Samsung one without triangle, but still the phone won't boot (as described in msg #3). So I'm now wondering if there's any way to a more aggressive restore (whence the topic title change)? Or am I barking up the wrong tree here?
----------
Hi
Okay, so I was testing out different kernels with Paranoid Android. I had the Dorimanx kernel installed at first, but had some volume issues, so I shifted to the Dream kernel, wouldn't boot. Then then the Andromeda kernel, and it still wouldn't boot, so I thought I might try doing a factory wipe in Andromeda's recovery. It then froze, and after about 20 minutes I gave up waiting for it and reset the device.
I then tried using the recovery to reinstall the Dorimanx kernel that worked, but it would fail, too. Just hang. After some attempts, also at just mounting the storage via USB, everything would fail, a couple of times with a message about emmc not mounting IIRC.
I then got a response on PA's forum about which kernel was suggested, and the answer was the stock kernel, so I thought I'd just use Odin to flash a CF kernel.
I think I had to do two attempts, or maybe just one, but it succeeded in installing the kernel, and the device rebooted. Except it didn't really. I can't get a "regular" boot screen (the one with the triangle), and so I can't get into recovery. Also, when the charger is plugged in, instead of showing first the grey battery icon with the spinner in it (which I seem to remember would spin before) and the going to the battery with green, it just show the grey icon with a spinner that doesn't spin. It never goes to the green battery screen.
I could (and can) still get to download mode, so I thought I'd do a back to stock routine. I downloaded a full stock ROM and tried to flash it with Odin. It would then freeze at the setup connection step. I tried a different image, same result. I tried reflashing the CF kernel (which worked just minutes before with Odin), again with the same result. I tried different USB ports and cables (even though I just used Odin successfully before), rebooting, unplugging at the frozen step and plugging back in, but to no avail. Odin won't flash any .tar.md5 anymore AFAICT. At least not with the regular no-frills one-click approach.
I'm fearing a hardbrick here. Except I still have access to download mode, and Odin sees the device. Could the recovery in Andromeda have destroyed the partition table perhaps? Or overwritten something it wasn't supposed to?
Is there a different approach to recovery that I could try out? Or does any one of you have any tips I might try out? Anything would be most welcome and appreciated
Thank you,
Daniel
PS: Oh, I just tried starting it up after it's been without battery and unplugged overnight and all day. I tried starting it into recovery mode, and now I have a different screen altogether: It says, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Well, that sounds tempting! Except - I've never used Kies on this device in the first place, and Kies does not having any clue what I've been doing with this thing... Would it be safe to try out? I'm hesitant...
Daniel Smedegaard Buus said:
Hi
Okay, so I was testing out different kernels with Paranoid Android. I had the Dorimanx kernel installed at first, but had some volume issues, so I shifted to the Dream kernel, wouldn't boot. Then then the Andromeda kernel, and it still wouldn't boot, so I thought I might try doing a factory wipe in Andromeda's recovery. It then froze, and after about 20 minutes I gave up waiting for it and reset the device.
I then tried using the recovery to reinstall the Dorimanx kernel that worked, but it would fail, too. Just hang. After some attempts, also at just mounting the storage via USB, everything would fail, a couple of times with a message about emmc not mounting IIRC.
I then got a response on PA's forum about which kernel was suggested, and the answer was the stock kernel, so I thought I'd just use Odin to flash a CF kernel.
I think I had to do two attempts, or maybe just one, but it succeeded in installing the kernel, and the device rebooted. Except it didn't really. I can't get a "regular" boot screen (the one with the triangle), and so I can't get into recovery. Also, when the charger is plugged in, instead of showing first the grey battery icon with the spinner in it (which I seem to remember would spin before) and the going to the battery with green, it just show the grey icon with a spinner that doesn't spin. It never goes to the green battery screen.
I could (and can) still get to download mode, so I thought I'd do a back to stock routine. I downloaded a full stock ROM and tried to flash it with Odin. It would then freeze at the setup connection step. I tried a different image, same result. I tried reflashing the CF kernel (which worked just minutes before with Odin), again with the same result. I tried different USB ports and cables (even though I just used Odin successfully before), rebooting, unplugging at the frozen step and plugging back in, but to no avail. Odin won't flash any .tar.md5 anymore AFAICT. At least not with the regular no-frills one-click approach.
I'm fearing a hardbrick here. Except I still have access to download mode, and Odin sees the device. Could the recovery in Andromeda have destroyed the partition table perhaps? Or overwritten something it wasn't supposed to?
Is there a different approach to recovery that I could try out? Or does any one of you have any tips I might try out? Anything would be most welcome and appreciated
Thank you,
Daniel
PS: Oh, I just tried starting it up after it's been without battery and unplugged overnight and all day. I tried starting it into recovery mode, and now I have a different screen altogether: It says, "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Well, that sounds tempting! Except - I've never used Kies on this device in the first place, and Kies does not having any clue what I've been doing with this thing... Would it be safe to try out? I'm hesitant...
Click to expand...
Click to collapse
the reason for Dream and Andromeda not booting ur phone is that, if ur paranoid rom version was latest, then it comes with the new JB mali drivers for which only Dori v7.4 and siyah v5.0 are compatible
since u have already messed up too much with ur phone, u can try the 'KIES' option as the last resort to restore it back, since odin flash is not wrk'ng for u
Okay, so I tried installing Kies and connecting it. A variety of connection attempts, but it just won't connect to the device.
But, I'm making some progress! I've found that when I can get the phone to boot into the "Firmware upgrade encountered an issue." screen, I can get Odin to flash the stock Gingerbread image (still won't in download mode). And I then get a reboot with the regular Samsung boot splash (no yellow triangle) - except it never gets past it. After about a minute, it'll go black and then boot back up to the same splash screen and the same problem.
This is the exact same image I've used previously to revert the device to stock. So I was kinda hoping to see a normal clean. But unfortunately no donut. It reminds me of a computer I once bricked by screwing with its BIOS - it never got beyond POST and so I couldn't reflash it.
Is there something like a BIOS in this thing that could've gotten damaged in some way? And if so, is there any way to use Odin or another tool to fix that?
Cheers,
Daniel
Tried flashing a couple of matching CF kernels. I now get the green battery after the grey one, but still no boot.
All turned out the be the Shun Andromeda kernel re-introducing the hard brick bug. If you have the same issue, see my reply here for links to where you can get the custom PIT trick up and running.
I rooted my device with superoneclick, got the 3e recovery, then got the CWM recovery for galaxyS i9000 through ROM manager(working fine), and then rebooted into recovery and flashed carbonROM for 4.2.2 (the .zip file), along with Gapps for 4.2.2. Now it's stuck at the samsung screen, I can't boot into recovery, taking out the battery doesn't help, and the power button is NOT jammed. I can't restore the backup that I made because I can't go into recovery and my computer is not detecting the device (with all the proper drivers installed). I don't know what to do. Does anybody know how to resolve this issue?
I don't care about the user data (including contacts, messages, etc) that much, if it needs to be wiped. I only want my phone back, with or without the ROM.
SirKurry said:
I rooted my device with superoneclick, got the 3e recovery, then got the CWM recovery for galaxyS i9000 through ROM manager(working fine), and then rebooted into recovery and flashed carbonROM for 4.2.2 (the .zip file), along with Gapps for 4.2.2. Now it's stuck at the samsung screen, I can't boot into recovery, taking out the battery doesn't help, and the power button is NOT jammed. I can't restore the backup that I made because I can't go into recovery and my computer is not detecting the device (with all the proper drivers installed). I don't know what to do. Does anybody know how to resolve this issue?
I don't care about the user data (including contacts, messages, etc) that much, if it needs to be wiped. I only want my phone back, with or without the ROM.
Click to expand...
Click to collapse
Are you still able to get into Download mode? If so then you can use Odin to re-flash the stock factory ROM that came with your phone. I would recommend taking a look at this guide here as well as this video guide here.
shimp208 said:
Are you still able to get into Download mode? If so then you can use Odin to re-flash the stock factory ROM that came with your phone. I would recommend taking a look at this guide here as well as this video guide here.
Click to expand...
Click to collapse
the .zip file in the first link is "unavailable in [my] geographical area. I can't use the youtube guide because i can't get into download mode. After not having touched it in several hours, I think the battery ran out, and if I plug it back in, it shows a loading icon that's stuck.
EDIT: I got it to get into download mode, but Odin won't detect it with the COM## thing. I can add the infuse.pit and the PDA md5 thing, but when I start it, it doesn't do anything.
SirKurry said:
the .zip file in the first link is "unavailable in [my] geographical area. I can't use the youtube guide because i can't get into download mode. After not having touched it in several hours, I think the battery ran out, and if I plug it back in, it shows a loading icon that's stuck.
EDIT: I got it to get into download mode, but Odin won't detect it with the COM## thing. I can add the infuse.pit and the PDA md5 thing, but when I start it, it doesn't do anything.
Click to expand...
Click to collapse
Make sure you have the USB drivers for your phone installed, you can download the drivers for your phone from here. Also before you flash anything to your phone it is essential that is has enough battery charge (70%+ to be on the safe side).
Thanks for all the help! I finally got it to detect my device in Odin. Turns out my drivers weren't working properly, so I re-installed them. It's in the process of reverting to stock now. You are a lifesaver!
help
SirKurry said:
the .zip file in the first link is "unavailable in [my] geographical area. I can't use the youtube guide because i can't get into download mode. After not having touched it in several hours, I think the battery ran out, and if I plug it back in, it shows a loading icon that's stuck.
EDIT: I got it to get into download mode, but Odin won't detect it with the COM## thing. I can add the infuse.pit and the PDA md5 thing, but when I start it, it doesn't do anything.
Click to expand...
Click to collapse
can you please tell me how you got it to go into odin. I am stuck at the very same spot.
I know there has been other treads about this before but none of the suggestions seemed to work for me. I searched and searched and I'm just not finding a fix. I hate to do these posts when an easy answer is right there but I just can't figure it out and it's killing me. So here it is:
I just got this Verizon Galaxy Tab that would not come on - only showed the battery charging icon. I just charged it over night and it came on once. However, processes kept shutting down. For instance, when I went into settings and tried to connect to my wifi network, the whole process would just close down. So I let it get to about 40% and reboot it to download mode (there was no recovery). I found the correct .tar file for it and flashed it with ODIN3 v1.85. It completed successfully but now it won't boot past the Samsung splash screen. Once the splash screen comes up, it will just go back to the large battery charging icon in the middle of the screen.
Then I tried the other option where you get into recovery and nothing happens at all. The screen is backlit black (you can just see light around the edges of the screen) and nothing ever happens.
So now, it's just charging but it seems to charge very slowly. I was wondering if this is a battery issue or some strange sequence that needs to be done. It seems to be at about 40% again. Any other suggestions would be appreciated.
These are other things I've tried:
hold the power button down for 30 seconds
Hold the power button down while touching the screen
More suggestions would be appreciated.
Now the tablet is fully charged but it still gets stuck on the splash screen when trying to boot up. Still have no recovery. Also, I'm not able to find a PIT file to re-partition. Can someone tell me how to get the stock recovery back at least? I've been looking but I can't find a file to flash for the recovery.
Same problem
Hi, I have the same issue basically. I have the Galaxy Tab SGH i957D 8.9 (TELUS) and flashed it to root last night, now I have the same problem. Except I have CWM installed, I was able to install that AFTER I locked it up. Help from one of the GURUs here would be great. It's obviously a problem caused by flashing it.
So try flashing with CWM, at least you'll have a good recovery on it. If we work together, we may be able to come up with a solution for our dilemma. I don't believe it;s a major problem, I had the same issue with my captivate phone when trying to CWM and Cyanogenmod, and I got it working perfectly, so there is hope.
I have tried the stock rom, rooted rom, and a couple of others, but still can;t get past the splash screens. Left it overnight trying to boot, and all it did was kill the battery. I can;t even turn it off, it just reboots every time I try shutting down. I CAN get to download and recovery mode though, and flash it all I want with Odin 3.7 and 1.83, just never boots past the splash screens.
DermagraFX said:
Hi, I have the same issue basically. I have the Galaxy Tab SGH i957D 8.9 (TELUS) and flashed it to root last night, now I have the same problem. Except I have CWM installed, I was able to install that AFTER I locked it up. Help from one of the GURUs here would be great. It's obviously a problem caused by flashing it.
So try flashing with CWM, at least you'll have a good recovery on it. If we work together, we may be able to come up with a solution for our dilemma. I don't believe it;s a major problem, I had the same issue with my captivate phone when trying to CWM and Cyanogenmod, and I got it working perfectly, so there is hope.
I have tried the stock rom, rooted rom, and a couple of others, but still can;t get past the splash screens. Left it overnight trying to boot, and all it did was kill the battery. I can;t even turn it off, it just reboots every time I try shutting down. I CAN get to download and recovery mode though, and flash it all I want with Odin 3.7 and 1.83, just never boots past the splash screens.
Click to expand...
Click to collapse
Thanx for the reply. As you can see, I've been around these forums for a long time and usually I'm able to work it out but this one has got me stumped. Just wanted to ask you if you have tried to flash a custom ROM in Clockwork? Also, did you go through unlocking the boot loader befor you flashed it? I did not because I received the tablet in this condition. I tried to flash clockwork mod but I get an "invalid file" error in Odin. Once I flashed the stock recovery and it worked fine. But after reflashing the stock rom, the stock recovery is gone now. Do you have a link to the files you used? I'm thinking that the stock recovery is messed up but I can only find that one file.
no I haven't tried flashing through CWM, as I wasn't trying to flash originally, I was just rooting and going easy on it, then it wouldn't boot, so I wasn't prepared and now can't add files to my SD drive.
I didn't unlock the boot, as none of the instructions I read mentioned it (rooting was all I was trying to do).
I don't even have a stock recovery either, all I have is CWM and TWRP.
I'm going to try mounting it in Linux and see if that makes any difference to put roms on my SD drive, as windows doesn't like it anymore, except through Odin, where luckily it seems to work fine... For now.. lol
Fixed!!!
shawndh said:
Thanx for the reply. As you can see, I've been around these forums for a long time and usually I'm able to work it out but this one has got me stumped. Just wanted to ask you if you have tried to flash a custom ROM in Clockwork? Also, did you go through unlocking the boot loader befor you flashed it? I did not because I received the tablet in this condition. I tried to flash clockwork mod but I get an "invalid file" error in Odin. Once I flashed the stock recovery and it worked fine. But after reflashing the stock rom, the stock recovery is gone now. Do you have a link to the files you used? I'm thinking that the stock recovery is messed up but I can only find that one file.
Click to expand...
Click to collapse
ok.. I have mine fixed and running again.
http://samsung-updates.com/device/?id=SGH-I957D
This is the stock flash/rom for Telus on the SGH i957D LTE 4G 8.9 model. Try samsung-updates.com and search for your exact model and carrier.
-Download correct stock image for your tablet.
-Unpack the file you downloaded
-Put your device in DOWNLOAD mode
-Connect it to Computer
-Start ODIN and wait for the COMM status to show as connected
-In PDA box navigate to your file and add it to the box.
-Press start
-Sit back and relax.
-Enjoy the fireworks as your tablet comes back to life..
-YEAH!!!
Life is good again...
DermagraFX said:
ok.. I have mine fixed and running again.
http://samsung-updates.com/device/?id=SGH-I957D
This is the stock flash/rom for Telus on the SGH i957D LTE 4G 8.9 model. Try samsung-updates.com and search for your exact model and carrier.
-Download correct stock image for your tablet.
-Unpack the file you downloaded
-Put your device in DOWNLOAD mode
-Connect it to Computer
-Start ODIN and wait for the COMM status to show as connected
-In PDA box navigate to your file and add it to the box.
-Press start
-Sit back and relax.
-Enjoy the fireworks as your tablet comes back to life..
-YEAH!!!
Life is good again...
Click to expand...
Click to collapse
I'm glad you got the right firmware and fixed your tab! But this site does not list a firmware for the SCH–i905 anywhere. Unless the Verizon Galaxy tab has an alternate model# there is no firmware on the site for my device. Oh well, at least one of us got tablets fixed. Congrats!
Download mode issue.
What recommendations do you guys have for a tablet that will not recognize in download mode?
I accidently flashed a bootloader and had auto reboot on - couldnt flash kernel and modem in time.
My tablet fully boots up, (rom manager says cwm is installed) as well as when i boot into recovery its completely black.
My main concern is that download mode is not recognized. it was previously working prior to installing the bootloader.
What can i do to fix this issue?
younggunner said:
What recommendations do you guys have for a tablet that will not recognize in download mode?
I accidently flashed a bootloader and had auto reboot on - couldnt flash kernel and modem in time.
My tablet fully boots up, (rom manager says cwm is installed) as well as when i boot into recovery its completely black.
My main concern is that download mode is not recognized. it was previously working prior to installing the bootloader.
What can i do to fix this issue?
Click to expand...
Click to collapse
Can you start by giving as much info as possible about your tab, make model# etc.
can you actually get into download mode? Power button and Volume down button till it boots then release pwr.
you may have bad drivers on your pc. I had this problem with my phone when I installed CM.
get into DL mode and then start Odin and hopefully you will see the Com port attached.
then in PDA load the stock rom for your tab.
hopefully at this point youll be all set.
if your tab is fully functional, then try just flashing CWM or TWPR to your tab. I found with mine that CWM works best. I like TWP better for looks and the touchscreen functionality, but I found it gets a bit flaky after a few flashes, where CWM seems more stable.
SHAWNDH...
give me all your info for your tab, make, model.. carrier etc. as much as you can, and I will see if I can find any stock roms while doing my searches. 2 sets of eyes are better than one...
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
younggunner said:
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
Click to expand...
Click to collapse
I don't get it. First, you can't flash a kernel using Odin. Second, your tab won't even be able to boot without the kernel.
Sent from my GT-P7500 using Tapatalk HD
younggunner said:
So i have a sch-i905, 4.0.4 - I CAN boot into normal android
I flashed a bootloader last night and had auto reboot ticked. was not able to install the modem or the kernel.
I can get into download mode without any issues,but now download mode says "waiting for cable" and is not recognized by pc as it once was prior to the flash.
I can also get into recovery but its completely black ( assuming due to no kernel flashed )
I can get into android normally, but cant fix firmware through download mode, and recovery.
Please help :X
side note: rom manager says twmp and cwm is installed, though i get no display in recovery only blackness
if i can get download mode to work again or get cwm to show up i can fix it, but dont know where to go from here.
Click to expand...
Click to collapse
If you can get into DL mode, then its probably just an issue of drivers on your pc. Download the samsung drivers and reinstall.
Then put your tab in dl mode. Then connect to the pc with cable, try a different usb port than before.
Then start odin, if you get the Com port showing up in the status box, then flash CWM recovery to the tab. Then start over with what you are trying to do. But I can almost garantee its an issue with drivers on your pc. I had the exact same problem with my phone when I did it,
and fixing drivers was the issue. I wss stumped for a long time on that issue. If that doesnt work, look into Heimdall flash utility or Kies and go from there.
Hope this helps. Or at least gets you on the right track.
update
DermagraFX said:
If you can get into DL mode, then its probably just an issue of drivers on your pc. Download the samsung drivers and reinstall.
Then put your tab in dl mode. Then connect to the pc with cable, try a different usb port than before.
Then start odin, if you get the Com port showing up in the status box, then flash CWM recovery to the tab. Then start over with what you are trying to do. But I can almost garantee its an issue with drivers on your pc. I had the exact same problem with my phone when I did it,
and fixing drivers was the issue. I wss stumped for a long time on that issue. If that doesnt work, look into Heimdall flash utility or Kies and go from there.
Hope this helps. Or at least gets you on the right track.
Click to expand...
Click to collapse
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
younggunner said:
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
Click to expand...
Click to collapse
Ive tried another pc as well. I dont believe its a driver issue as there is 0 interaction in download mode with device manager. but prior it easily was detected in odin no issues.
younggunner said:
dont think its a driver issue.
it was working fine in download mode prior to me flashing a bootloader.bin, and yes you can flash a kernel.bin through odin, as well as a modem.bin.
I was in the process of installing cwm this way when it happened.
I can get into the os, i can get adb working fine, recovery is just a black screen though it goes into it. and i can get into download mode still, just stuck at "waiting for cable" no interaction with device manager
---------- Post added at 12:24 AM ---------- Previous post was at 12:22 AM ----------
Ive tried another pc as well. I dont believe its a driver issue as there is 0 interaction in download mode with device manager. but prior it easily was detected in odin no issues.
Click to expand...
Click to collapse
Ok... Im getting confused here... You Can still flash with Odin? Then you can install a new recovery on it. If device manager on the pc is not working, then you probably have a corrupt install, or the wrong rom file for your particular tab, and the usb drivers arent correct for your tablet.
Personally, I would start by downloading a stock rom file and return the tab to factory before starting anything, so you have it working as it should before continuing further.
If you DO HAVE a stock rom, maybe you could pass it along, i believe shawndh who started this thread is in need of one for the same tablet.
confusion fixed
DermagraFX said:
Ok... Im getting confused here... You Can still flash with Odin? Then you can install a new recovery on it. If device manager on the pc is not working, then you probably have a corrupt install, or the wrong rom file for your particular tab, and the usb drivers arent correct for your tablet.
Personally, I would start by downloading a stock rom file and return the tab to factory before starting anything, so you have it working as it should before continuing further.
Click to expand...
Click to collapse
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
younggunner said:
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
Click to expand...
Click to collapse
Oh... Well then it is beyond the scope of any problem I have encountered, or seen a solution to. I thought you could still connect in download mode.
Can you change usb debugging mode in tablet settings, that may enable you to connect? If not I dont think I personally can help, as your posts read like you could still use Odin.
On my phone, (galaxy S) nothing would connect after I messed up, but could do things with Heimdalls utility. See if you can connect with that. Worth a try, it does the same as Odin, but connects differently somehow.
DermagraFX said:
Oh... Well then it is beyond the scope of any problem I have encountered, or seen a solution to. I thought you could still connect in download mode.
Can you change usb debugging mode in tablet settings, that may enable you to connect? If not I dont think I personally can help, as your posts read like you could still use Odin.
On my phone, (galaxy S) nothing would connect after I messed up, but could do things with Heimdalls utility. See if you can connect with that. Worth a try, it does the same as Odin, but connects differently somehow.
Click to expand...
Click to collapse
i even went as far as getting a brand new cable to see if it was my cable still same thing. No response in download mode for either pc's ive tried.
little stumped....
possible clues: when tablet boots up, it boots up to a bright black screen, only once it completely boots up am i able to see my display properly.
DermagraFX said:
Can you start by giving as much info as possible about your tab, make model# etc.
can you actually get into download mode? Power button and Volume down button till it boots then release pwr.
you may have bad drivers on your pc. I had this problem with my phone when I installed CM.
get into DL mode and then start Odin and hopefully you will see the Com port attached.
then in PDA load the stock rom for your tab.
hopefully at this point youll be all set.
if your tab is fully functional, then try just flashing CWM or TWPR to your tab. I found with mine that CWM works best. I like TWP better for looks and the touchscreen functionality, but I found it gets a bit flaky after a few flashes, where CWM seems more stable.
SHAWNDH...
give me all your info for your tab, make, model.. carrier etc. as much as you can, and I will see if I can find any stock roms while doing my searches. 2 sets of eyes are better than one...
Click to expand...
Click to collapse
Thanx for the reply. I have the SCH-i905 32gb Galaxy 10.1 tab. The carrier is Verizon. I've spent days looking for another download source but I can only find one - there's a link from this site. Others have posted that it did restore their devices so I'm thinking that there are some bad clusters that need to be quarantined but I can't even find a tool for the Galaxy Tab that will do or check for that. I'd appreciate it if you could take a look though. Thanx.
younggunner said:
I cannot currently get download mode to recognize anything. just keeps saying "waiting for cable" thats why i cant do anything in download mode. It was currently working prior to flashing the bootloader through odin with the "auto reboot" accidentally clicked.
Click to expand...
Click to collapse
Are you connecting to a USB port that is on the motherboard of your computer? Mine will only recognize my tablet with one port. The other ports are not recognized at all by ODIN.
shawndh said:
Thanx for the reply. I have the SCH-i905 32gb Galaxy 10.1 tab. The carrier is Verizon. I've spent days looking another download source but I can only find one - there's a link from this site. Others have posted that it did restore their devices so I'm thinking that there are some bad clusters that need to be quarantined but I can't even find a tool for the Galaxy Tab that will do or check for that. I'd appreciate it if you could take a look though. Thanx.
Click to expand...
Click to collapse
I don't think its a cluster issue, just a bad flash previously. But you'll see from the link, yours is also known as the P4vzw. Well check the link and make sure that's your tab that I found. Then have a look at ALL the files for that tab.
Have you seen/tried this one... here's the thread STOCK ROM FOR YOUR TAB...
forum.xda-developers.com/showthread.php?t=1342995
Here's just the file.
http://goo.gl/XPMXv
Try flashing CWM recovery to your tab, and try a file from cyanogenmod
http://wiki.cyanogenmod.org/w/P4vzw_Info
Or just try the CM ROM first maybe and see what happens. I don't remember what you have for recovery. There are a bunch on there, but all nightly that I saw, but even that would be better than nothing for now if it works.
I'm still looking, but I know what you're saying about few and far between. I think they all are for the tabs. Let you know if I find anything else.
Another mod ROM. http://www.teamandroid.com/2012/08/...tab-101-sch-i905-android-411-aosp-jelly-bean/