Related
To start off with, I'm just wondering, do you ALWAYS have to enter a CAPTCHA when posting to this forum. That will drive me nuts!
Anyhow, I am looking to install Cyanogenmod on my Samsung Galaxy Mega 6.3 (GT-I9205) and I haven't been in the business of modding an Android phone in a LONG long while. The videos on YouTube are extremely lackluster in walking you step-by-step if you haven't been in it for a while. I don't just want to install the ROM and call it a day, I want to understand what the process is first, create a full image of my phone first in case anything goes wrong and AFTER that point I want to install a Cyanogenmod.
So, from what little bits and pieces I have gleaned from the Internets, I have come across three main themes when modding.
1. Root
2. ClockworkMod
3. Cyanogenmod
I don't want to brick my phone so I'd like some help in getting started with this.
Please move this thread if it's not in the right spot.
Question 1: As far as rooting your phone, is the process similar on the Android platform as a whole or is there specific steps for each "line" of phones. It feels like rooting is pretty cut-and-dry. I have rooted before, I just don't remember exactly what the most efficient way of doing it was.
Question 2: It seems like installing ClockworkMod requires that you select an option that's specifically for your phone (i.e. picking an option that applies to a differing phone will brick your phone). Am I correct in this assumption.
Question 3: To my understanding from what I've seen, it is recommended that you white your phone and clear the cache (a very good suggestion) when installing a new ROM. Should this be done after you install ClockworkMod? At what point should this be done and what is the correct steps to do this?
I'm a developer & programmer by nature, but this Android stuff really has me feeling unfamiliar so I need everyones help to understand how this beast ticks.
GreenLED said:
To start off with, I'm just wondering, do you ALWAYS have to enter a CAPTCHA when posting to this forum. That will drive me nuts!
Anyhow, I am looking to install Cyanogenmod on my Samsung Galaxy Mega 6.3 (GT-I9205) and I haven't been in the business of modding an Android phone in a LONG long while. The videos on YouTube are extremely lackluster in walking you step-by-step if you haven't been in it for a while. I don't just want to install the ROM and call it a day, I want to understand what the process is first, create a full image of my phone first in case anything goes wrong and AFTER that point I want to install a Cyanogenmod.
So, from what little bits and pieces I have gleaned from the Internets, I have come across three main themes when modding.
1. Root
2. ClockworkMod
3. Cyanogenmod
I don't want to brick my phone so I'd like some help in getting started with this.
Please move this thread if it's not in the right spot.
Question 1: As far as rooting your phone, is the process similar on the Android platform as a whole or is there specific steps for each "line" of phones. It feels like rooting is pretty cut-and-dry. I have rooted before, I just don't remember exactly what the most efficient way of doing it was.
Question 2: It seems like installing ClockworkMod requires that you select an option that's specifically for your phone (i.e. picking an option that applies to a differing phone will brick your phone). Am I correct in this assumption.
Question 3: To my understanding from what I've seen, it is recommended that you white your phone and clear the cache (a very good suggestion) when installing a new ROM. Should this be done after you install ClockworkMod? At what point should this be done and what is the correct steps to do this?
I'm a developer & programmer by nature, but this Android stuff really has me feeling unfamiliar so I need everyones help to understand how this beast ticks.
Click to expand...
Click to collapse
Hi..check this thread out http://forum.xda-developers.com/showthread.php?t=2566642 as it has all you need to get the CM11 rom on your device which works on your version..all what you need is in Silesh.Nair signature (links) at the bottom of his posts, and just download odin 3.07 as you will need one of the recoveries CWM or TWRP with kitkat support to install the CM11 rom, but they are available in Silesh.Nair signature in his posts.
starmaster10 said:
Hi..check this thread out http://forum.xda-developers.com/showthread.php?t=2566642 as it has all you need to get the CM11 rom on your device which works on your version..all what you need is in Silesh.Nair signature (links) at the bottom of his posts, and just download odin 3.07 as you will need one of the recoveries CWM or TWRP with kitkat support to install the CM11 rom, but they are available in Silesh.Nair signature in his posts.
Click to expand...
Click to collapse
I am unable to post in the dev forum yet as I am new to forums however I have i527m device and I have read that it works with this phone however everytime I try and install through TWRP it says zip verification failed and when I try through CWM it aborts and says "status 7" any idea why?
shadow1179 said:
I am unable to post in the dev forum yet as I am new to forums however I have i527m device and I have read that it works with this phone however everytime I try and install through TWRP it says zip verification failed and when I try through CWM it aborts and says "status 7" any idea why?
Click to expand...
Click to collapse
Did you install the latest recovery ( twrp/cwm )? It will only work with the recoveries available in my signature. First flash the recovery using Odin, then flash the ROM zip using recovery.
Silesh.Nair said:
Did you install the latest recovery ( twrp/cwm )? It will only work with the recoveries available in my signature. First flash the recovery using Odin, then flash the ROM zip using recovery.
Click to expand...
Click to collapse
Yes I used the files in your signature and installed TWRP as follows
- Opened ODIN
- Put Phone into Stock Recovery
- Plugged into comptuer
- Loaded TWRP tar file under PDA in ODIN
- Clicked Start
No errors popped up
To Flash Rom
- Restarted phone and held Volume Up button to load TWRP
- Full Backup before Flashing
- Touched Install
- Selected zip file downloaded from your status
It starts updating and has the following on the screen
"Updating partition details...
Running boot script...
Finished running boot scrip.
Installing '/external_sd/cm-11-20131216-UNOFFICI (text goes off screen at this point)
Checking for MD5 file
Skipping MD5 check: no MD5 file found
Verifying zip signature...
E:Zip signature verification failed: 1
Error flashing zip '/external_sd/cm-11-20131216- (Text goes off screen again)
Updating partition details...
Failed (in red letters)"
Then gives me option of Home, Wipe cache/dalvik(which I also tried) or reboot system
Do you have the rom file on your external sd card..if so I would put the rom zip file on the internal sd and see if it works then..unless you have the rom file on your internal sd already..then disregard this..but it should work.
Sent from my SGH-I527M Mega 6.3
Silesh.Nair said:
Did you install the latest recovery ( twrp/cwm )? It will only work with the recoveries available in my signature. First flash the recovery using Odin, then flash the ROM zip using recovery.
Click to expand...
Click to collapse
Thank you for Paranoid, I get my mega Tuesday eager to try Paranoid.
starmaster10 said:
Do you have the rom file on your external sd card..if so I would put the rom zip file on the internal sd and see if it works then..unless you have the rom file on your internal sd already..then disregard this..but it should work.
Sent from my SGH-I527M Mega 6.3
Click to expand...
Click to collapse
I tried moving to internal SD and then attempted flashing using TWRP v 2.6.3.0 from this thread and got the following
"Updating partition details...
Running boot script...
Finished runnigng boot script.
Installing '/sdcard/cm-...blah blah blah file
CHecking for MD5 file...
Skipping MD5 check: no MD5 file found
Verifying zip signature....
E:Zip signature vcerification failed: 1
Error flashing zip *enter file name here*
Updating partition details..."
So I have finally managed to get this installed by basically going back to square one, fresh downloads and fresh factory restore for the 5th time lol and it finally worked. Got a couple questions tho. Is there a way to have the notification LED pulse rotate if theres more than one? like say i get a text and a email waiting for me at same time is there a way to have it switch colours between text and email every 5 seconds or whatever? Also is there a way to make the icons in app drawer smaller?
Not trying to be pushy about getting these added just wanna make sure that its not just a case of ia am missing something
Thanks
SHadow
Anyway you can help me out I'm stuck like you were. I can't get it to install it says install aborted.
shadow1179 said:
So I have finally managed to get this installed by basically going back to square one, fresh downloads and fresh factory restore for the 5th time lol and it finally worked. Got a couple questions tho. Is there a way to have the notification LED pulse rotate if theres more than one? like say i get a text and a email waiting for me at same time is there a way to have it switch colours between text and email every 5 seconds or whatever? Also is there a way to make the icons in app drawer smaller?
Not trying to be pushy about getting these added just wanna make sure that its not just a case of ia am missing something
Thanks
SHadow
Click to expand...
Click to collapse
Use philz recovery instead of twrp.
Sent from my Nexus 5 using xda premium
shadow1179 said:
So I have finally managed to get this installed by basically going back to square one, fresh downloads and fresh factory restore for the 5th time lol and it finally worked. Got a couple questions tho. Is there a way to have the notification LED pulse rotate if theres more than one? like say i get a text and a email waiting for me at same time is there a way to have it switch colours between text and email every 5 seconds or whatever? Also is there a way to make the icons in app drawer smaller?
Not trying to be pushy about getting these added just wanna make sure that its not just a case of ia am missing something
Thanks
SHadow
Click to expand...
Click to collapse
I have the same problem, how did you fixed it ?
---------- Post added at 08:04 PM ---------- Previous post was at 07:37 PM ----------
shadow1179 said:
So I have finally managed to get this installed by basically going back to square one, fresh downloads and fresh factory restore for the 5th time lol and it finally worked. Got a couple questions tho. Is there a way to have the notification LED pulse rotate if theres more than one? like say i get a text and a email waiting for me at same time is there a way to have it switch colours between text and email every 5 seconds or whatever? Also is there a way to make the icons in app drawer smaller?
Not trying to be pushy about getting these added just wanna make sure that its not just a case of ia am missing something
Thanks
SHadow
Click to expand...
Click to collapse
Im stuck on that MD5 File Problemmmmmm Im soo frustrated help
jcar6245 said:
I have the same problem, how did you fixed it ?
---------- Post added at 08:04 PM ---------- Previous post was at 07:37 PM ----------
Im stuck on that MD5 File Problemmmmmm Im soo frustrated help
Click to expand...
Click to collapse
If you want any help then you can create your question in Q&A section > Help thread..
U will find your answer better there..
Q&A for [APOLLO/RECOVERY LOCKED] Safestrap Recovery v3.72/v3.75 [B02 2014-07-03]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [APOLLO/RECOVERY LOCKED] Safestrap Recovery v3.72/v3.75 [B02 2014-07-03]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Fire HDX 8.9 vs Kindle Fire HDX 8.9
Okay, so I have noticed that Hashcode built this for both the 7" and 8.9" versions of the Kindle Fire HDX, but does the 8.9" version here: http://forum.xda-developers.com/showthread.php?t=2612772
Does this support the 3rd generation Fire HDX 8.9" version? I noticed that the download links say it supports systems earlier than 14.3.2.1 and later than 14.3.2.1, but does it support the newer Fire HDX 8.9" system 4.1.1? Judging from what I have researched, I believe that there isn't much difference between 14.3.2.1 and 4.1.1. Has anyone tried to root or install CM on this newest version of the HDX 8.9 yet?
Thanks in advance.
WickdWzrd said:
Okay, so I have noticed that Hashcode built this for both the 7" and 8.9" versions of the Kindle Fire HDX, but does the 8.9" version here: http://forum.xda-developers.com/showthread.php?t=2612772
Does this support the 3rd generation Fire HDX 8.9" version? I noticed that the download links say it supports systems earlier than 14.3.2.1 and later than 14.3.2.1, but does it support the newer Fire HDX 8.9" system 4.1.1? Judging from what I have researched, I believe that there isn't much difference between 14.3.2.1 and 4.1.1. Has anyone tried to root or install CM on this newest version of the HDX 8.9 yet?
Thanks in advance.
Click to expand...
Click to collapse
No, it's not possible to mod FireOS 4 in any way.
Safestrap apk for Kindle Fire HDX 14.3.2.3.2
Hi I'm trying to install safestrap on my kfhdx, but all the links in the forums seem to be broken. Any suggestions on where I can find this download? Thanks a lot
j1mbo83 said:
Hi I'm trying to install safestrap on my kfhdx, but all the links in the forums seem to be broken. Any suggestions on where I can find this download? Thanks a lot
Click to expand...
Click to collapse
Available here.
Although I'm not sure why you want to install safestrap as the firmware version you are running (self reported as 14.3.2.3.2) permits flashing 'native' twrp which is far more robust. From there you can flash CM11 or Nexus 2.0.5. With a bit of work you can also unlock your bootloader which opens the door to CM12 and Nexus 4.x. None of these roms work with safestrap.
Safestrap is a primary used by those who cannot flash 'native' twrp (most newer Kindles) and/or if you wish to toggle between Fire OS and Nexus 1.01. Those are the only roms that work with safestrap. Also note you must take steps to block OTA while using Safestrap or risk bricking your device. At present the only method that works reliably is HDX toolkit.
Thanks for the reply, I'm obviously new to this but I've rooted my Kindle, installed Google play, but recently Google has been forcing updates of play services and I'm afraid to mess with anything else until I can either unlock bootloader it install custom recovery, if you could point me in the right direction on how to do this I'd appreciate it. Didn't know I could install twrp. Any directions in layman's terms would help, thanks.
j1mbo83 said:
Thanks for the reply, I'm obviously new to this but I've rooted my Kindle, installed Google play, but recently Google has been forcing updates of play services and I'm afraid to mess with anything else until I can either unlock bootloader it install custom recovery, if you could point me in the right direction on how to do this I'd appreciate it. Didn't know I could install twrp. Any directions in layman's terms would help, thanks.
Click to expand...
Click to collapse
Installing a custom recovery (twrp) is straight forward given your version of Fire OS. Please confirm you really are on v14.3.2.3.2 and OTA (over-the-air) updates have been blocked and if so, via which method. Did you roll your device back from a higher firmware version? Sorry for all the questions - want to make sure the foundation is solid before taking next steps.
Outline to install custom recovery:
- side load Flashify (here). You can also find/install this from Play Store if working on your device.
- download custom twrp (here); you want Apollo v2.8.6.0
- use Flashify to backup your current recovery (don't skip this step)
- use Flashify to flash (install) the twrp recovery image previously downloaded. You must use this image; don't go downloading/flashing a generic version!
When complete you device will reboot back into Fire OS as if nothing changed. You can verify twrp was correctly installed by powering down and then restarting by pressing power + vol-up. Release the power button when the grey Kindle logo appears; release the vol-up button a few seconds alter. After a few moments a blue logo should appear and you will enter twrp recovery. Have a look around but don't change anything. Reboot you device and post back for further instructions (actually information on next steps; where the fun begins!) .
Be aware that any type of flashing can render your device unusable. The steps outlined above are relatively safe if you follow directions carefully and double check each action before executing. Ask questions in advance; don't panic and start doing unscripted stuff if something goes wrong.
I am running v14.3.2.3.2, I rooted the kindle and blocked OTA updates using hdx toolkit. I did this maybe about 7 months ago and never rolled back. Will these directions still work for me?
j1mbo83 said:
I am running v14.3.2.3.2, I rooted the kindle and blocked OTA updates using hdx toolkit. I did this maybe about 7 months ago and never rolled back. Will these directions still work for me?
Click to expand...
Click to collapse
Looks good. Just go slow and double check each step. Once twrp is installed and confirmed working you can then flash either the Nexus or CM11 rom which will give you unfettered access to the Play store and all the goodness of a 'generic' android device. Effectively your Kindle looses its identity as an Amazon tablet. Nexus (what I use) has proven rock solid but is getting a bit long in the tooth. CM11 is based on KitKat and only has a minor issues with bluetooth, LTE and occasionally wifi. Most users of this rom are quite happy and can easily work around the issues.
Prior to flashing a new rom you should make a complete backup of your current system in twrp and then store that image on another device. Also keep in mind that once you flash twrp it is very difficult to restore your device to full 'stock'. Assume a one way trip.
Edit: Forgot to mention LTE. At present none of the roms support LTE but that will likely change in the near future. If you have an LTE enabled tablet you'll have to decide if that or play store access is more important.
Thanks. Ok I installed flashify, then followed your link to download and install twrp and it has a note at the top that says to unlock boot loader. I don't think it is unlocked. How do I check this? And if it isn't, how would I go about unlocking it?
---------- Post added at 09:00 PM ---------- Previous post was at 08:11 PM ----------
Ok I successfully installed twrp, created a backup, and saved it to another device. Ready for the next step. Thanks for all your help.
Congrats. If you are asking how to know if you are unlocked, chances are good it is locked. You do not need to unlock the bootloader, but it is highly recommended as once successfully unlocked it is another failsafe, and opens up other roms (like cm 12). To unlock it, I suggest grabbing Draxie's automated (slightly) script from the original dev section. Know that the act of unlocking the bootloader is difficult, and will require you to learn more about your device, but it does pay off in the end.
j1mbo83 said:
Thanks. Ok I installed flashify, then followed your link to download and install twrp and it has a note at the top that says to unlock boot loader. I don't think it is unlocked. How do I check this? And if it isn't, how would I go about unlocking it?
---------- Post added at 09:00 PM ---------- Previous post was at 08:11 PM ----------
Ok I successfully installed twrp, created a backup, and saved it to another device. Ready for the next step. Thanks for all your help.
Click to expand...
Click to collapse
Congrats!! See post from lekofraggle (here) which I fully agree with. However, I think you can defer the bootloader unlock for a little while recognizing that it provides an important failsafe should you bork your device and is a prerequisite for some roms (eg: CM12).
Next step involves flashing a rom of your choice. Recognize all aps/data will be wiped; you'll be starting clean. However, anything previously purchased in the play store can be downloaded again assuming you use the same credentials when setting up accounts on the 'new' rom.
Choices:
- Nexus 2.0.5: JellyBean based, rock solid, near AOSP (unmodified Android). Info/links here.
- CM11: KitKat based, popular across numerous Android devices with useful extensions baked in. Some minor BT/WiFi flakiness on HDX devices. Info/links here.
Both roms can also be downloaded using the ROMs tab at the top of this page. Don't go trying anything else. You want HDX Nexus or CM11-Apollo. Magic Beans will also work but carries no significant advantage over the other two and hasn't see much development in recent months.
All ROMs can be flashed from twrp. Be sure to make a backup of your current environment first. Use caution in twrp if you are new to the tool; it's easy to mess things up including a full brick of your device.
I recommend you start with Nexus. It's a great rom that will serve you well; an upgrade (KitKat) is in the works and should be released in the not-too-distant future. CM11 is also a fine choice and offers greater compatibility with some of the more recent app releases. Both are further customizable via Xposed Framework but that's another discussion.
Ok thanks, I downloaded the zips, now I have just one more question (I know, I have a lot...). Do I need to wipe my system before installing new Rom?
j1mbo83 said:
Ok thanks, I downloaded the zips, now I have just one more question (I know, I have a lot...). Do I need to wipe my system before installing new Rom?
Click to expand...
Click to collapse
Keep asking! Lots of devices have died in the hands of ignorant users (not intended to be an insult...were are all ignorant until educated).
In theory you do not need to wipe the device but there have been scattered reports of strange behaviors after performing a 'dirty' flash. My recommendation is to perform a factory reset (under wipe) from within twrp. This will clear data, cache and dalvik while leaving system and internal storage intact. If you opt for an "advanced wipe" select the previous 3 plus system; leave internal storage alone. Do not format or repair; just asking for trouble.
As always make a backup before proceeding and store a copy of that off-device. Short term keep a copy on the device along with the rom image just in case you have to redo something and can't connect via tether. Rare but it does happen.
Hello,
I'm hoping that someone can help me out with this.
Last December i bought a Fire HDX 7 (Thor). I immediatley followed the procedure to install Safestrap and the Thor Nexus ROM v2.0.1. Shortly after that my device got lost. Just last week I found it because my parents moved. After this I started looking around the internet to check if there are any 5.0 or 5.1 ROMs available. I found out they are indeed available.
What I want to do now is get rid of Safestrap, unlock the bootloader and install TWRP to be able to flash new ROMs. I want to start using TWRP because I'm used to working with TWRP.
The problem is that I can't seem to find a way to get this done, despite searching for it on this page for several hours. Can anyone help me on the right track? Would be very much appreciated.
Timmetjuh said:
Hello,
I'm hoping that someone can help me out with this.
Last December i bought a Fire HDX 7 (Thor). I immediatley followed the procedure to install Safestrap and the Thor Nexus ROM v2.0.1. Shortly after that my device got lost. Just last week I found it because my parents moved. After this I started looking around the internet to check if there are any 5.0 or 5.1 ROMs available. I found out they are indeed available.
What I want to do now is get rid of Safestrap, unlock the bootloader and install TWRP to be able to flash new ROMs. I want to start using TWRP because I'm used to working with TWRP.
The problem is that I can't seem to find a way to get this done, despite searching for it on this page for several hours. Can anyone help me on the right track? Would be very much appreciated.
Click to expand...
Click to collapse
Your options are determined by the current version of Amazon firmware installed on your device. I assume you retained Fire OS in the base slot. Boot into that and poke around settings until you find the version number (should be 13.x.x plus some other gibberish). Post what you find and we'll go from there.
Caution: You should disable wifi immediately after booting into Fire OS to prevent an automatic update from Amazon from spoiling your day. At minimum an update will limit future options. I can also brick your device depending on firmware level and other previous mods (including safestrap). Disabling wifi in Nexus is not sufficient as the two roms operate independently.
Davey126 said:
Your options are determined by the current version of Amazon firmware installed on your device. I assume you retained Fire OS in the base slot. Boot into that and poke around settings until you find the version number (should be 13.x.x plus some other gibberish). Post what you find and we'll go from there.
Caution: You should disable wifi immediately after booting into Fire OS to prevent an automatic update from Amazon from spoiling your day. At minimum an update will limit future options. I can also brick your device depending on firmware level and other previous mods (including safestrap). Disabling wifi in Nexus is not sufficient as the two roms operate independently.
Click to expand...
Click to collapse
Could it be that I somehow deleted the Fire OS back then? Don't really remeber what I did exactly..
Timmetjuh said:
Could it be that I somehow deleted the Fire OS back then? Don't really remeber what I did exactly..
Click to expand...
Click to collapse
Quite possibly. Enjoy Nexus; it's a good rom. Alternatively, follow the directions to see if you still have Fire OS installed. If at/below v3.2.6 then Lollipop is possible albeit with a lot of work and significant risk to your device. Otherwise you are limited to Fire OS and Nexus.
Seriously, if you don't recall what you did and can't figure out how start Safestrap in recovery mode be happy with what you have. There are no step-by-step guides. You have to read (a lot) and be prepared for numerous setbacks including an unrecoverable brick of your now working Kindle.
Davey126 said:
Quite possibly. Enjoy Nexus; it's a good rom. Alternatively, follow the directions to see if you still have Fire OS installed. If at/below v3.2.6 then Lollipop is possible albeit with a lot of work and significant risk to your device. Otherwise you are limited to Fire OS and Nexus.
Seriously, if you don't recall what you did and can't figure out how start Safestrap in recovery mode be happy with what you have. There are no step-by-step guides. You have to read (a lot) and be prepared for numerous setbacks including an unrecoverable brick of your now working Kindle.
Click to expand...
Click to collapse
Sorry for my late response.. I just started Safestrap and can only find 1 ROM slot, the Stock ROM slot which probably means that I deleted the original OS.
I did find some files on my laptop that brought some memories back. What I did back then is downgrade the original software to version 13.3.2.6 and than to 13.3.1.0. Does this create any new possibilities?
I just managed to create a new ROM slot and succesfully installed stock 13.3.2.6 on it, so now running on Nexus ROM and stock 13.3.2.6.
Timmetjuh said:
Sorry for my late response.. I just started Safestrap and can only find 1 ROM slot, the Stock ROM slot which probably means that I deleted the original OS.
I did find some files on my laptop that brought some memories back. What I did back then is downgrade the original software to version 13.3.2.6 and than to 13.3.1.0. Does this create any new possibilities?
Click to expand...
Click to collapse
Timmetjuh said:
I just managed to create a new ROM slot and succesfully installed stock 13.3.2.6 on it, so now running on Nexus ROM and stock 13.3.2.6.
Click to expand...
Click to collapse
Warning: Do NOT allow Fire OS to auto-update. Doing so will likely brick your device. Short term the best way to prevent this is to only boot into Nexus. If necessary I can walk you through blocking OTA. Seriously - stay out of Fire OS for now.
I am no Safestrap expert but I believe the rom in the 'base' slot becomes the default when you uninstall Safestrap. So you may have some shuffling to do. Another concern is whether removing/reinstalling Fire OS will impact the ability to recognize the OS once Safetrap is gone. You need a functioning version of Fire OS (and recovery) to follow the 'standard' rollback/update/flash procedures.
However, there may be a shortcut. If 13.3.1.0 was the base rom just prior to installing Nexus and wiping out Fire OS you then should be able to flash twrp without further prep. That would give you access to both Nexus variants and CM11. Unfortunately, there is no easy way to determine the bootloader version which is the component that really matters. It should match the last version of Fire OS that was natively installed before you overwrite it with Nexus.
Unfortunately, the recent install of 13.3.2.6 into a safestrap slot complicates matters. I believe installs within Safestrap leaves the bootloader untouched. But I can't be sure. A misstep can leave your device in an unrecoverable condition; don't go experimenting.
Let's see which recovery you have installed. Power down the device then restart holding power + vol-up. When the grey Kindle logo appears release the power key; vol-up can be released a few seconds later. What happens after the grey logo disappears?
Davey126 said:
Warning: Do NOT allow Fire OS to auto-update. Doing so will likely brick your device. Short term the best way to prevent this is to only boot into Nexus. If necessary I can walk you through blocking OTA. Seriously - stay out of Fire OS for now.
I am no Safestrap expert but I believe the rom in the 'base' slot becomes the default when you uninstall Safestrap. So you may have some shuffling to do. Another concern is whether removing/reinstalling Fire OS will impact the ability to recognize the OS once Safetrap is gone. You need a functioning version of Fire OS (and recovery) to follow the 'standard' rollback/update/flash procedures.
However, there may be a shortcut. If 13.3.1.0 was the base rom just prior to installing Nexus and wiping out Fire OS you then should be able to flash twrp without further prep. That would give you access to both Nexus variants and CM11. Unfortunately, there is no easy way to determine the bootloader version which is the component that really matters. It should match the last version of Fire OS that was natively installed before you overwrite it with Nexus.
Unfortunately, the recent install of 13.3.2.6 into a safestrap slot complicates matters. I believe installs within Safestrap leaves the bootloader untouched. But I can't be sure. A misstep can leave your device in an unrecoverable condition; don't go experimenting.
Let's see which recovery you have installed. Power down the device then restart holding power + vol-up. When the grey Kindle logo appears release the power key; vol-up can be released a few seconds later. What happens after the grey logo disappears?
Click to expand...
Click to collapse
I see the following:
Kindle Fire System Recovery
Your Kindle doesn't seem to be able to boot. Resetting your device to Factory defaults may help you to fix this issue.
Then I get the options to Reboot or to reset to Factory Default.
Oh, the Fire OS is not connected to any networks so it won't be able to update.
Timmetjuh said:
I see the following:
Kindle Fire System Recovery
Your Kindle doesn't seem to be able to boot. Resetting your device to Factory defaults may help you to fix this issue.
Then I get the options to Reboot or to reset to Factory Default.
Oh, the Fire OS is not connected to any networks so it won't be able to update.
Click to expand...
Click to collapse
Ok - a working stock recovery. That's good.
I am conflicted on next steps. The scripted approach would have you uninstall Safestrap (assuming Fire OS had remained in slot 0), rollback to 3.1.0 and then install twrp. However, since slot 0 now contains Nexus I do not feel removing Safestrap is wise. Nor to I think reinstalling Fire OS in the base slow will yield a functioning system once Safestrap is gone.
The 'shortcut' would have you flash twrp recovery (via adb or Flashify) since your bootloader *should*_be at the right level due to a previous 3.1.0 rollback. However, if that is not correct you will end up with a borked recovery which is difficult to rectify.
In your shoes I would probably do nothing given the device is fully functional. The developer of the Nexus rom is working on a KitKat 'upgrade' which is close to being released; a Safestrap variant will hopefully follow. There's no shame in running Nexus. Upgrade to v4.4, add a few Xposed modules and you have fully supported, near AOSP environment that's only lacking a few eye candy elements from Lollipop.
Davey126 said:
Ok - a working stock recovery. That's good.
I am conflicted on next steps. The scripted approach would have you uninstall Safestrap (assuming Fire OS had remained in slot 0), rollback to 3.1.0 and then install twrp. However, since slot 0 now contains Nexus I do not feel removing Safestrap is wise. Nor to I think reinstalling Fire OS in the base slow will yield a functioning system once Safestrap is gone.
The 'shortcut' would have you flash twrp recovery (via adb or Flashify) since your bootloader *should*_be at the right level due to a previous 3.1.0 rollback. However, if that is not correct you will end up with a borked recovery which is difficult to rectify.
In your shoes I would probably do nothing given the device is fully functional. The developer of the Nexus rom is working on a KitKat 'upgrade' which is close to being released; a Safestrap variant will hopefully follow. There's no shame in running Nexus. Upgrade to v4.4, add a few Xposed modules and you have fully supported, near AOSP environment that's only lacking a few eye candy elements from Lollipop.
Click to expand...
Click to collapse
It's not that I don't like the Nexus ROM, I just like to experiment with these things..
So I just installed TWRP with Flashify (started Flashify from NEXUS) and now I seem stuck at the grey Kindle fire logo. I'm just going to leave it alone for a few hours, hopefully it boots later today.
Davey126 said:
Ok - a working stock recovery. That's good.
I am conflicted on next steps. The scripted approach would have you uninstall Safestrap (assuming Fire OS had remained in slot 0), rollback to 3.1.0 and then install twrp. However, since slot 0 now contains Nexus I do not feel removing Safestrap is wise. Nor to I think reinstalling Fire OS in the base slow will yield a functioning system once Safestrap is gone.
The 'shortcut' would have you flash twrp recovery (via adb or Flashify) since your bootloader *should*_be at the right level due to a previous 3.1.0 rollback. However, if that is not correct you will end up with a borked recovery which is difficult to rectify.
In your shoes I would probably do nothing given the device is fully functional. The developer of the Nexus rom is working on a KitKat 'upgrade' which is close to being released; a Safestrap variant will hopefully follow. There's no shame in running Nexus. Upgrade to v4.4, add a few Xposed modules and you have fully supported, near AOSP environment that's only lacking a few eye candy elements from Lollipop.
Click to expand...
Click to collapse
It still boots after a very long time, however I don't know if I get the possibility to enter recovery because it takes several hours to boot. Any more ideas?
Timmetjuh said:
It still boots after a very long time, however I don't know if I get the possibility to enter recovery because it takes several hours to boot. Any more ideas?
Click to expand...
Click to collapse
Power down device and attempt to enter recovery by pressing power + vol-up. Release the power button after the grey logo appears; vol-up can be released after a few seconds. What happens next? Likely one of the following (good -> bad):
- blue screen followed by twrp recovery
- stock recovery with only two options: factory reset and reboot
- continuation of grey kindle logo
Davey126 said:
Power down device and attempt to enter recovery by pressing power + vol-up. Release the power button after the grey logo appears; vol-up can be released after a few seconds. What happens next? Likely one of the following (good -> bad):
- blue screen followed by twrp recovery
- stock recovery with only two options: factory reset and reboot
- continuation of grey kindle logo
Click to expand...
Click to collapse
I'm stuck at the grey Kindle logo..
Did it! Managed to flash the stock bootloader, rollback and install TWRP. Now ready to flash CM11. Thanks for you help!
Timmetjuh said:
Did it! Managed to flash the stock bootloader, rollback and install TWRP. Now ready to flash CM11. Thanks for you help!
Click to expand...
Click to collapse
Congrats! Had a bad feeling after your earlier post; glad that was misplaced. Enjoy CM11 and all the goodness that comes from a liberated HDX.
At some point you should consider unlocking the bootloader. That will provide an important fail safe should things go wrong and opens the door to newer roms. Unlike previous flashes there is little/no risk in unlocking. It will either work or not with no adverse consequences. Unlocking can be a frustrating ride as the process involves multiple steps in unfamiliar territory but ultimately the benefits outweigh the effort IMO. Nothing that needs to be tackled right away but keep it on your radar ... especially if you plan to experiment with other roms.
Unlock bootloader
Hello davey,
I am also interested in getting from safestrap v4 to an unlocked bootloader in order to use a lollipop ROM. My 3rd gen hdx 7 started on 4.5.5 so I did OTA rollback to 3.2.8, upgraded to 4.5.2, then rooted and safestrapped. Unfortunately I lost my stock ROM, but I current have both CM11 and HDZ nexus v4 on 2 different ROM slots. What would be my best way to proceed? From my research so far, it would appear I need to flash hdx nexus 2.0, then flash rollback image to get to modified 3.2.4, and from there 3.1.0 stock update with will allow me to use python method to unlock BL. Is this all correct?
Thanks in advance for your guidance
slothdabski said:
Hello davey,
I am also interested in getting from safestrap v4 to an unlocked bootloader in order to use a lollipop ROM. My 3rd gen hdx 7 started on 4.5.5 so I did OTA rollback to 3.2.8, upgraded to 4.5.2, then rooted and safestrapped. Unfortunately I lost my stock ROM, but I current have both CM11 and HDZ nexus v4 on 2 different ROM slots. What would be my best way to proceed? From my research so far, it would appear I need to flash hdx nexus 2.0, then flash rollback image to get to modified 3.2.4, and from there 3.1.0 stock update with will allow me to use python method to unlock BL. Is this all correct?
Thanks in advance for your guidance
Click to expand...
Click to collapse
No. You can NOT unlock the bootloader! You can NOT downgrade to 3.2.4 and then further to 3.1.0/3.2.3.2! DON'T attempt to do so, you will brick your HDX!
Your only available option is to stay on 4.5.2 and use Safestrap v4 with either Nexus and/or CM11.
slothdabski said:
Hello davey,
I am also interested in getting from safestrap v4 to an unlocked bootloader in order to use a lollipop ROM. My 3rd gen hdx 7 started on 4.5.5 so I did OTA rollback to 3.2.8, upgraded to 4.5.2, then rooted and safestrapped. Unfortunately I lost my stock ROM, but I current have both CM11 and HDZ nexus v4 on 2 different ROM slots. What would be my best way to proceed? From my research so far, it would appear I need to flash hdx nexus 2.0, then flash rollback image to get to modified 3.2.4, and from there 3.1.0 stock update with will allow me to use python method to unlock BL. Is this all correct?
Thanks in advance for your guidance
Click to expand...
Click to collapse
Unfortunately, you can not unlock your bootloader. Amazon introduced anti-rollback protection that will hard brick the device if rolled back below 3.2.8. Sorry, mate.
Davey126 said:
Unfortunately, you can not unlock your bootloader. Amazon introduced anti-rollback protection that will hard brick the device if rolled back below 3.2.8. Sorry, mate.
Click to expand...
Click to collapse
Thanks Davey, you have been very helpful replying to me in another thread also. My reason for seeking a ROM other, than Nexus v4 or CM11, is the kitkat bluetooth tether/VPN bug documented at code.google.com/p/android/issues/detail?id=62714 (sorry for no direct link, xda won't let me post them yet). A "work around" is to establish a wifi connection, even if it doesnt have internet access. This, for whatever reason, allows kitkat to forward the packets to apps on the kindle. I probably could get away with plugging in an old access point at work to enable the sharing sharing of my phones data connection with my safestrap kitkit kindle, but this isn't practical outside of my workplace.
FYI, I cant share my phone's connection via wifi because its an ATT note 4 with lollipop, a locked bootloader, and no permaroot available. I doubt there's a way to tether between 2 android devices via microUSB; but i'd be open to that too!
Thanks again for your wisdom and expertise!
slothdabski said:
Thanks Davey, you have been very helpful replying to me in another thread also. My reason for seeking a ROM other, than Nexus v4 or CM11, is the kitkat bluetooth tether/VPN bug documented at code.google.com/p/android/issues/detail?id=62714 (sorry for no direct link, xda won't let me post them yet). A "work around" is to establish a wifi connection, even if it doesnt have internet access. This, for whatever reason, allows kitkat to forward the packets to apps on the kindle. I probably could get away with plugging in an old access point at work to enable the sharing sharing of my phones data connection with my safestrap kitkit kindle, but this isn't practical outside of my workplace.
FYI, I cant share my phone's connection via wifi because its an ATT note 4 with lollipop, a locked bootloader, and no permaroot available. I doubt there's a way to tether between 2 android devices via microUSB; but i'd be open to that too!
Thanks again for your wisdom and expertise!
Click to expand...
Click to collapse
I actually just got it working by running the following as SU in terminal emaulator
# ip route add default dev tun0 scope link
Not sure yet if I have to do this every time I tether, but if so, i think i can just make a script to execute automatically?
Hey everyone I recently bricked my kindle fire because I was not careful enough about loading a custom ROM. Long story short I followed the instructions for a kindle fire HD7 instead of HDX7. Luckily, Amazon's customer service is WAY better than their operating systems because I was able to return my bricked device and get a new one within 3 days!
That being said, I was wondering if anyone here could provide a good, clear guide, or at least overview of the steps I need to take to install cyanogenmod 11 or some other custom ROM on my kindle fire hdx 7. I have been searching for a decent guide, but haven't been able to find one. Links to actual resources would be even better. I don't mind searching on my own, but I need at least enough information to not screw up my device again. Any help anyone could give me would be very appreciated! Thank you!
and just for reference my device is Kindle Fire HDX 7" THOR currently running FireOS 4.5.5
tropicallazerbeams said:
Hey everyone I recently bricked my kindle fire because I was not careful enough about loading a custom ROM. Long story short I followed the instructions for a kindle fire HD7 instead of HDX7. Luckily, Amazon's customer service is WAY better than their operating systems because I was able to return my bricked device and get a new one within 3 days!
That being said, I was wondering if anyone here could provide a good, clear guide, or at least overview of the steps I need to take to install cyanogenmod 11 or some other custom ROM on my kindle fire hdx 7. I have been searching for a decent guide, but haven't been able to find one. Links to actual resources would be even better. I don't mind searching on my own, but I need at least enough information to not screw up my device again. Any help anyone could give me would be very appreciated! Thank you!
and just for reference my device is Kindle Fire HDX 7" THOR currently running FireOS 4.5.5
Click to expand...
Click to collapse
Amazon support is usually quite responsive. Be aware device replacement for software issues under warranty is a one-time courtesy. You own the replacement (actually a refurb).
High level steps required to prep your device for CM11 (or Nexus v4):
- rollback to FireOS 3.2.8
- upgrade to FireOS 4.5.2
- root with Kingroot or other method
- block OTA (over-the-air updates) - step #1
- install Safestrap v4
- flash a Safestrap v4 compatible rom (currently CM11 or Nexus v4)
The above links are NOT click and execute! There are no step-by-step guides, helpful videos, comprehensive tutorials (despite titles suggesting otherwise), etc. You have to dive into the forums and wade through hundreds of posts (many off-topic/extraneous) to get feel for the detailed procedures. There are some outstanding posts but you'll need to find them. Be aware some steps carry significant risks including a full-on brick from which there is no recovery. Read instructions carefully and be sure to ask questions before taking action.
A few tips:
- download everything you need in advance storing them in uniquely named folders. Some steps mandate your HDX be isolated from any networks. While most items can be retrieved via USB tether it is much easier to simply head for the folder on your HDX when the file is needed.
- understand what USB debug means and know how to enable in FireOS
- install minimal adb + fastboot and learn basic adb commands such as 'install' and 'push'
- ES File Explorer is your friend; alway keep a copy of the apk on your device for installation when needed.
- never perform a 'factory reset' unless specifically advised to do so by someone experienced with HDX devices; many sad tales begin with 'I did a factor reset ...'
Good luck.
Wow, awesome, this was exactly what I was looking for. I just finished installing CM11, the whole process took me about an hour now that I understand what to do. Thanks for the guide, I have a feeling this will help more people than just me. I would add one more step for anyone else looking: When installing your custom ROM, go ahead and install gapps (https://wiki.cyanogenmod.org/w/Google_Apps) so that you can access the google play store from your new ROM.
Here are some decent video guides on how to use Safestrap in case anyone needed help with that:
(https://www.youtube.com/watch?v=K6fPF5UZsWw) General Safestrap usage
(https://www.youtube.com/watch?v=xR0WXCITq2Q) Specifically how to install a custom ROM
So I have just a few more questions now, CM11 can only access about 8 out of the 16GB on the device. Is there a way to expand that memory to the entire 16GB? I should probably just be satisfied with my progress so far, but I honestly would not miss the stock fireOS if it would give me more space.
When/if I need to update CM, do I need to flash each and every update via recovery?
Thanks for all the help so far, you da man!
tropicallazerbeams said:
Wow, awesome, this was exactly what I was looking for. I just finished installing CM11, the whole process took me about an hour now that I understand what to do. Thanks for the guide, I have a feeling this will help more people than just me. I would add one more step for anyone else looking: When installing your custom ROM, go ahead and install gapps (https://wiki.cyanogenmod.org/w/Google_Apps) so that you can access the google play store from your new ROM.
Here are some decent video guides on how to use Safestrap in case anyone needed help with that:
(https://www.youtube.com/watch?v=K6fPF5UZsWw) General Safestrap usage
(https://www.youtube.com/watch?v=xR0WXCITq2Q) Specifically how to install a custom ROM
So I have just a few more questions now, CM11 can only access about 8 out of the 16GB on the device. Is there a way to expand that memory to the entire 16GB? I should probably just be satisfied with my progress so far, but I honestly would not miss the stock fireOS if it would give me more space.
When/if I need to update CM, do I need to flash each and every update via recovery?
Thanks for all the help so far, you da man!
Click to expand...
Click to collapse
Based on a few reports CM11 works best in the stock slot. Seems WiFi won't enter a low power state in secondary slots resulting in excessive battery drain. Thoughts:
- backup up stock slot in SS recovery. Save archive off-device.
- backup cm11 slot, switch to slot slot and restore
- after stock slot w/cm11 confirmed ok delete secondary slot(s)
You'll have access to the full 16GB with ability to restore FireOS if needed.
---------- Post added at 08:00 AM ---------- Previous post was at 07:55 AM ----------
tropicallazerbeams said:
Here are some decent video guides on how to use Safestrap in case anyone needed help with that:
(https://www.youtube.com/watch?v=K6fPF5UZsWw) General Safestrap usage
(https://www.youtube.com/watch?v=xR0WXCITq2Q) Specifically how to install a custom ROM
Click to expand...
Click to collapse
Thanks - nice find.
@ggow - possible add to SS v4 OP or separate thread for newbies.
tropicallazerbeams said:
Wow, awesome, this was exactly what I was looking for. I just finished installing CM11, the whole process took me about an hour now that I understand what to do. Thanks for the guide, I have a feeling this will help more people than just me. I would add one more step for anyone else looking: When installing your custom ROM, go ahead and install gapps (https://wiki.cyanogenmod.org/w/Google_Apps) so that you can access the google play store from your new ROM.
Here are some decent video guides on how to use Safestrap in case anyone needed help with that:
(https://www.youtube.com/watch?v=K6fPF5UZsWw) General Safestrap usage
(https://www.youtube.com/watch?v=xR0WXCITq2Q) Specifically how to install a custom ROM
So I have just a few more questions now, CM11 can only access about 8 out of the 16GB on the device. Is there a way to expand that memory to the entire 16GB? I should probably just be satisfied with my progress so far, but I honestly would not miss the stock fireOS if it would give me more space.
When/if I need to update CM, do I need to flash each and every update via recovery?
Thanks for all the help so far, you da man!
Click to expand...
Click to collapse
Davey126 said:
Based on a few reports CM11 works best in the stock slot. Seems WiFi won't enter a low power state in secondary slots resulting in excessive battery drain. Thoughts:
- backup up stock slot in SS recovery. Save archive off-device.
- backup cm11 slot, switch to slot slot and restore
- after stock slot w/cm11 confirmed ok delete secondary slot(s)
You'll have access to the full 16GB with ability to restore FireOS if needed.
---------- Post added at 08:00 AM ---------- Previous post was at 07:55 AM ----------
Thanks - nice find.
@ggow - possible add to SS v4 OP or separate thread for newbies.
Click to expand...
Click to collapse
- Added links to the OP of Safestrap 4.0.1 thread
Okay I ran into one more problem. I followed your instructions on switching ROM-1 to ROM-STOCK, but when I was restoring the contents of ROM-1 to ROM-STOCK, the procedure failed. It didn't say why, it just showed up in red text saying "failed". So it rebooted, but since ROM-STOCK was selected and a restoration had just failed on it, nothing happens when I boot up. It is stuck on the grey kindle fire logo. Is there a way that I can get into safestrap?
tropicallazerbeams said:
Okay I ran into one more problem. I followed your instructions on switching ROM-1 to ROM-STOCK, but when I was restoring the contents of ROM-1 to ROM-STOCK, the procedure failed. It didn't say why, it just showed up in red text saying "failed". So it rebooted, but since ROM-STOCK was selected and a restoration had just failed on it, nothing happens when I boot up. It is stuck on the grey kindle fire logo. Is there a way that I can get into safestrap?
Click to expand...
Click to collapse
Well crap - that's not good. The symptoms suggest Safestrap v4 may have been damaged. I assume you tried waiting, rebooted multiple times, powered off/on, etc. Is there any indication Safestrap (or any environment beyond the grey boot screen) is present?
hehe, looks like I may have bricked my 2nd Fire....Tried waiting, rebooting and everything, still broke..... So Safestrap never really appeared to be damaged when it was rebooting after the installation failure. If I had to guess, I would say that ROM-1 and safestrap are totally fine, the only problem is that I can't access them because ROM-STOCK is selected. So what if I got my hands on one of those factory fastboot cables, do you think I could boot straight into fastboot, change my boot options to boot into recovery or my ROM-1?
tropicallazerbeams said:
hehe, looks like I may have bricked my 2nd Fire....Tried waiting, rebooting and everything, still broke..... So Safestrap never really appeared to be damaged when it was rebooting after the installation failure. If I had to guess, I would say that ROM-1 and safestrap are totally fine, the only problem is that I can't access them because ROM-STOCK is selected. So what if I got my hands on one of those factory fastboot cables, do you think I could boot straight into fastboot, change my boot options to boot into recovery or my ROM-1?
Click to expand...
Click to collapse
Sorry, with locked bootloader fastboot mode on HDX is practically useless, factory cable won't help you. Did you by any chance when you created ROM-1 slot changed data partition to bigger size? That would explain why restoration to STOCK slot failed. If you can't enter safestrap recovery at boot time, that means it IS damaged.
Yeah I did change the partition size when I created ROM-1. Thanks for all the help fellas, but it looks like I am right back where I started. Good thing my tablet was a gift
Im going to follow the process since I have at 4.5.2 rooted before.
How do I create the rom-1 to later install on stock without brick?
Or I should install directly to stock without doing rom-1?
alberto1414 said:
Im going to follow the process since I have at 4.5.2 rooted before.
How do I create the rom-1 to later install on stock without brick?
Or I should install directly to stock without doing rom-1?
Click to expand...
Click to collapse
Review the video in the Safestrap v4 OP for general usage info. For a variety of reasons I recommend only using the stock slot in SS v4. You should create a backup of the stock slot containing FireOS before flashing a new rom. Keep a copy off-device.
http://forum.xda-developers.com/showthread.php?p=61410598
Davey126 said:
Review the video in the Safestrap v4 OP for general usage info. For a variety of reasons I recommend only using the stock slot in SS v4. You should create a backup of the stock slot containing FireOS before flashing a new rom. Keep a copy off-device.
http://forum.xda-developers.com/showthread.php?p=61410598
Click to expand...
Click to collapse
When being on safestrap after back up the stock slot.
do I have to do anything before flashing the new rom? like some wipes os what?
Can help with steps?
1. wipe? what to wipe?
2. flash?
3. factory reset?
I saw the instructions on the hdx nexus v4. but it doesnt say anything before flash. I think they talk about a new rom slot. but mine has the fire os.
alberto1414 said:
When being on safestrap after back up the stock slot.
do I have to do anything before flashing the new rom? like some wipes os what?
Can help with steps?
1. wipe? what to wipe?
2. flash?
3. factory reset?
I saw the instructions on the hdx nexus v4. but it doesnt say anything before flash. I think they talk about a new rom slot. but mine has the fire os.
Click to expand...
Click to collapse
I suggest you do some additional reading to gain confidence in the process. Briefly:
- backup the stock rom slot before taking any other action (use backup option within Safestrap v4)
- nothing needs to be done before flashing a new rom (Nexus v4 or CM11 only)
- each rom has its own requirements but in general performing a factory reset from within Safestrap is recommended. This is NOT the same thing as doing a factory reset from the Kindle recovery menu. Never to that unless instructed by an experienced member of the community.
While others may be willing to do so I will not provide a 'step-by-step' as all the information you need is one of the following threads. Reading and gaining confidence the the best way to avoid a mistake that could cripple your device. Community members are happy to answer specific questions as you become familiar with the details.
Safestrap v4
Nexus v4
CM11 for HDX (Safestrap build)
Read through posts now, thanks for the help
m1kemyer5 said:
Read through posts now, thanks for the help
Click to expand...
Click to collapse
Just one note: if it says factory reset in the installation notes it's the standard wipe only, i.e. you open the wipe menu, and swipe to wipe - do NOT go into advanced wipe!
Now it so happens @ggow implemented a System-wipe-protection in Safestrap v4 to prevent more bricked devices, but usually you should NOT have any reason to open the advanced wipe menu. Wiping System in Safestrap v3.7x is lethal (doesn't concern Safestrap v4 users, but can't be mentioned often enough).
Hi to all looking to have a custom rom, I recommend CM11 because it gives you a safe try and the wifi works.
Many new people trying nexus v4 are stuck.
If you like me, new to these things go with CM11.
I started with fire os 4.5.5 and downgrade to 3.2.8 to later upgrade to 4.5.2 , root and safestrap 4. create a new rom slot with default(no modification on size). to later install there the CM11 and everything without touching the stock slot of fire os 4.5.2.
If any one wants my personal experience, simple PM I'll be glad to help. just in this particular situation I just explained.
Thanks to the dev that made this posible.
alberto1414 said:
Hi to all looking to have a custom rom, I recommend CM11 because it gives you a safe try and the wifi works.
Many new people trying nexus v4 are stuck.
If you like me, new to these things go with CM11.
I started with fire os 4.5.5 and downgrade to 3.2.8 to later upgrade to 4.5.2 , root and safestrap 4. create a new rom slot with default(no modification on size). to later install there the CM11 and everything without touching the stock slot of fire os 4.5.2.
If any one wants my personal experience, simple PM I'll be glad to help. just in this particular situation I just explained.
Thanks to the dev that made this posible.
Click to expand...
Click to collapse
Quick clarifications to @alberto1414's comments:
- both Nexus v4 and CM11 run equally well in the stock (default) slot of Safestrap v4. There is no significant difference in stability or performance.
- creating one or more secondary slots allows multiple roms to reside on the device at the same time; a reboot is required to switch between roms.
- CM11 can function in a secondary slot; Nexus v4 and FireOS v4 can not as WiFi only works in the stock slot.
- flashing either Nexus v4 or CM11 to the stock slot overwrites FireOS; however this is not a problem as FireOS v4.5.2 can be restored at a later time either from a backup created by the user or as a 'fresh' install using a custom version available here.
- individuals who flashed Nexus v4 to the stock slot are not "stuck"; they can restore or reinstall FireOS 4.5.2 as outlined above.
- creating/using a secondary slot in Safestrap v4 significantly increases battery consumption. Root cause has yet to be identified but it appears the device never enters 'deep sleep' when secondary slots are in use.
- permanent device storage is shared across slots. This can become a problem on 16GB or 32GB devices. In contrast, all available storage is available to the stock slot if secondary slots are not created.
- Safestrap compatible roms are created/tested in the stock slot. Functionality and stability in secondary slots is not assured.
tldr;
So Optimal solution would be to get Gapps working on Stock 13.3.0.5, and from there I'll install and android launcher. But to do this, the Xposed problem will need to be fixed.
Has anyone else had a problem with Xposed where every menu leads to just a blank white screen?
Not-so-optimal would be to do all the upgrading, OTA blocking, flashing, and backing up to get it on like CM11 or something.
Hey all,
I just made my XDA account, I've been kinda lurking on the forums for a little while though.
I won a Kindle Fire HDX 7" (idk What gen or how to determine what gen it is. Its got 2gb RAM and 32gb Internal) that says its running 13.3.0.5 and so I decided to do a little research about custom roms and rooting and found this wonderful forum. I've had a bit of experience with custom roms, I loaded CM9 onto an LG Thrive (look that one up, its a bit of a pain to flash as well) And I'd love to see about flashing this brand new FHDX.
Now, I didn't purchase this tablet, so it is of no expense to me, however, I would rather not be reckless in my attempts to mess with it.
What I want:
Google Apps -- Play/Music/Gmail/Calendar/etc
Root
Android JB or KK OS or Android-like Launcher or Ubuntu Touch (idk about this one, it seems really cool, I've heard about it for a long time and never got the chance to play with it)
I'd love to stay away from bricks, but I'm not afraid of them enough to not flash it. I'm a computer engineer and kinda have some experience with android and flashing.
Now, as to my progress so far:
I've rooted it with towelroot and installed ES FileManager, SuperSU, and I've tried to install Xposed/HDXposed multiple times but it simply will not work correctly. Xposed gives me a white screen when I go into any of the menus and doesn't allow me to install after clicking "Framework". I've tried many different renditions of Gapps packages, but almost all of them result in a process failing or stopping.
Thanks and if you need more information or I've left something out, feel free to ask away!
b1nary
UPDATE:
I turned wifi on for a little bit and my Kindle decided it wanted to update, so now its running 13.3.2.5 :/
I've put it in airplane mode, and I'm thinking about doing this to downgrade it.
b1nary.v01d said:
UPDATE:
I turned wifi on for a little bit and my Kindle decided it wanted to update, so now its running 13.3.2.5 :/
I've put it in airplane mode, and I'm thinking about doing this to downgrade it.
Click to expand...
Click to collapse
I'm not sure what you're up to, but I'd suggest to downgrade to 3.1.0 using the procedure in the thread you linked to (be sure to scroll down for the procedure for 3.2.5/3.2.6 because you can NOT use the edited build number anymore!), then install TWRP, unlock the bootloader and flash a ROM of your choice.
You're up to that? Or what's on your mind?
Yea, sounds great! I'll post my progress as I get things going.
btw I love your name if its a play on Tom Clancy. Love those books and the games inspired by them!
b1nary.v01d said:
Yea, sounds great! I'll post my progress as I get things going.
btw I love your name if its a play on Tom Clancy. Love those books and the games inspired by them!
Click to expand...
Click to collapse
Alright, basic approach is here. Lots of info to read, so any questions just ask, before you brick your HDX.
I'm now Rooted running on 13.3.1.0
I've disabled OTA updates as well. From here I'll pick the rom I want to d/l, get TWRP installed, unlock bootloader with python/.unlock file, and flash the rom.
(I'll edit this post as I finish things)
Thanks!
b1nary.v01d said:
I'm now Rooted running on 13.3.1.0
I've disabled OTA updates as well. From here I'll pick the rom I want to d/l, get TWRP installed, unlock bootloader with python/.unlock file, and flash the rom.
(I'll edit this post as I finish things)
Thanks!
Click to expand...
Click to collapse
OK, don't forget to make a backup of Fire OS in TWRP (and move it to your PC) before you flash any custom ROM. Might be useful one day.
Alright!!
I'm backed up, unlocked, custom recovery'd, and flashed to the new Nexus KitKat 4.4.4!
Thanks so much for the help Cl4ncy both in this thread and all the others.
And thanks to the XDA community for hosting all these awesome tools!
Now to have some fun with my new psuedo-nexus 7" tablet >
b1nary