[ROM] OMEGA V19 [SS][4.3TW][FAST-STABLE][MULTIC][MK2/MJ7/MKF][gogoliePORT][STOCK] - Verizon Samsung Galaxy S 4

OMEGA v19
FIGURED WITH INDIE RELEASING HIS 4.4 LEAKED ROM I had better let you guys enjoy it a bit before the v20 4.4 and an unloked bootloader port heh, joking probably wont see her for a bit boys and girls so enjoy what you can while you have it. btw thats 4.4 that triggers knox but ima try it later since I've triggered it messing with SS trying to get zips working for people over last cpl weeks... im sure well see 4.4 tw soon enough til then enjoy.
This is a follow up to my v18 ROM any problems or issues try first searching that thread for info then post issue or problem herein v19's thread please.. http://forum.xda-developers.com/showthread.php?t=2591648
thanks testers of my original port v18. of course ...indie... genius and the rest of the omega crew. thx ppls
like all my new roms this is multicarrier friendly meaning you might have to flash your modules and possibly modem and apns to get full service but its very easy to do and nearly all files possibly needed for this conversion are available at http://www.androidfilehost.com/?w=devices&uid=23269279319201630 along with various other mods and rom ports.
Installing is straight forward: zip is for slots 1-420 and the restorable install is for any slot including STOCK!!!
And this wont hurt your phone or leave incompatability issues like other SS roms may have done. Plz post problems issues here not on indies or any other omega forum. Thanks must be given to indie and anyone he says I just ported this one was the easiest one I've done and has been 100% successful for everyone I personally installed for. Be sure to +thank me or indie or Download another rom.
Install by running zip from Safestrap or TWRP. Untested on CWM. After installing if not a MK2 VZW user you will have to flash your Safestrap modules and modem and apn if all else fails. This installs the best on a fresh rom slot ie newly created / blank.
Zip DL:
http://www.androidfilehost.com/?fid=23311191640114279
SS RESTORE DL:
http://www.androidfilehost.com/?fid=23269279319202601
Install: unzip the backup files in the zip to a folder like /TWRP/backupsi/141fa3db/ndie-Omega19bygogolie no matter where the files need to be one level in a directory named something and your TWRP/SS backup directory needs to read from that location if you cant figure this out you probably should not be installing a custom anything. Once files are where you want them pop into SS/TWRP and restore these to any slots butt even STOCK. yay ok bed time ill update and make pretty maybe later.
I HIGHLY RECOMMEND USING THE RESTORE VERSION OVER THE ZIP. PERSONALLY I THINK ITS SAFER MORE COMPATIBLE WITH ALL PHONES WITH 3.7+
hi haters.
thx wip testers and omega crew clans. thx again hashc0de and surge ur my heroes your works been a godsend
Omega v19 Opening Post
Changelog:
Based on firmware XXUEML6 Android 4.3 (Date: 19/12/2013)
Kernel talexop v1.3
New:
Notification Manager by RYO Software - Omega Rom users can monitor 3 apps instead of 1, thanks and credits to bartito for this gift to us
Added:
Google Drive
18 new csc to Omegas Multi csc
Updated:
Kernel talexop v1.3 with MKF ramdisk
Accounts Sync Profiler
ChatON
Dolphin Browser
Flipboard
Tripadvisor
Rom is Deodexed + Rooted + Zipaligned
Rom is No Full Wipe

I'm gonna give this a try tonight. Thanks!
Sent from my SCH-I545 using XDA Premium 4 mobile app

Awesome work! already running the SS restore version and its excellent! I'll give the zip install version a whirl and see how she looks.

new vers
Gator Brah this is the V19 are u the 1 download i saw that SS restore was sitting idle on ah for a cpl weeks. if the zip doesnt work or give you a nice looking version try the new SS restore v19 just posted link here for it. thanks guys!

gigilie said:
Gator Brah this is the V19 are u the 1 download i saw that SS restore was sitting idle on ah for a cpl weeks. if the zip doesnt work or give you a nice looking version try the new SS restore v19 just posted link here for it. thanks guys!
Click to expand...
Click to collapse
Hey man one thing i've noticed with this rom (both SS and zip options) as well as your other rom M1A3, Wifi seems to have trouble maintaining a stable connection. It tends to drop off and i find myself having to toggle it every so often.
The other issue is also with wifi, when i try to connect to an access point using 2 phase authentication (WAP + PEAP) it will accept the credentials, pass verification but never receive the IP address. It then just bounces back and forth between scanning for wifi networks and trying to obtain an IP address from the access point....which kills the battery.
I can connect to the very same access point from the stock rom.
I've tried flashing the modules, replacing the modules with the ones from the stock rom, as well as replacing the wap_config.conf file from the working rom slot. no go
Hopefully you can clue me into a fix. Im on MJ7, I have seen this problem come back after i re-flashed my image with Odin. its definitely related to these roms in particular
Other than that i really like both of these roms. the gold theme on M1A3 is pretty cool too

+1 using foxhound. I love that ROM but am having the same problems as above. Won't connect to work network and keeps searching and obtaining IP address but never connects and kills battery. Used data on way home for maps and signal said 4g but Google said not connected had to switch back to stock and all was fine...shame cause I love foxhound.... Using ss 3.71 on MK2

Gator Brah said:
Hey man one thing i've noticed with this rom (both SS and zip options) as well as your other rom M1A3, Wifi seems to have trouble maintaining a stable connection. It tends to drop off and i find myself having to toggle it every so often.
The other issue is also with wifi, when i try to connect to an access point using 2 phase authentication (WAP + PEAP) it will accept the credentials, pass verification but never receive the IP address. It then just bounces back and forth between scanning for wifi networks and trying to obtain an IP address from the access point....which kills the battery.
I can connect to the very same access point from the stock rom.
I've tried flashing the modules, replacing the modules with the ones from the stock rom, as well as replacing the wap_config.conf file from the working rom slot. no goHopefully you can clue me into a fix. Im on MJ7, I have seen this problem come back after i re-flashed my image with Odin. its definitely related to these roms in particular
Other than that i really like both of these roms. the gold theme on M1A3 is pretty cool too
Click to expand...
Click to collapse
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this

gigilie said:
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
Click to expand...
Click to collapse
sure i'll do testing on that. I wont be back at work until monday to test out the wifi though.

Loaded this rom via safe strap restore with no issues. Working on getting everything setup. No issues encountered to this point

No issues with wifi...
Sent from my SCH-I545 using XDA Premium 4 mobile app, but battery life is horrible. Sitting overnight went from 70% to 12% this morning.

gigilie said:
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
Click to expand...
Click to collapse
So the first fix didnt change anything unfortunately. Flashed the second zip and on reboot had a ton of FC errors and couldn't even unlock the screen. Restarted again and it was pretty much soft bricked...had to restore from backup.

Flashed zip in twrp, loaded great no serious problems. Only issue is that it keeps trying to encrypt my SD card. I am concerned about losing data. Please advise how to stop encr. I have been rebooting and took out card. Any suggestions? Thanks.
Sent from my SCH-I545 using Tapatalk

Alxoom33 said:
Flashed zip in twrp, loaded great no serious problems. Only issue is that it keeps trying to encrypt my SD card. I am concerned about losing data. Please advise how to stop encr. I have been rebooting and took out card. Any suggestions? Thanks.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Edit: reflashed. Note wifi does not work, reflashed latest 1/17 Ktoonsz kernel, wifi works but now starts trying to encrypt SD card again...?
Sent from my Xoom Wifi using Tapatalk

Alxoom33 said:
Edit: reflashed. Note wifi does not work, reflashed latest 1/17 Ktoonsz kernel, wifi works but now starts trying to encrypt SD card again...?
Sent from my Xoom Wifi using Tapatalk
Click to expand...
Click to collapse
it shouldnt do anything to an SD card

Thanks, re flashed and fixed issue.
Sent from my SCH-I545 using Tapatalk

I thought it would be helpful to share my post from the Foxhound thread on installation of Omega on MDK http://forum.xda-developers.com/showthread.php?p=49744674
[ROM]Foxhound Diamond Dogs 3.6 TW-4.3-MK2/AnyCarrier-SS-KNOXfree-CLEAN-FAST-THEMED
Gigilie, I would be happy to walk through Omega instillation on MDK. It's very easy.
Before you start make sure you downloaded Omega. v. 19. I used the .zip version and reccomend flashing .zip for all MDK recovery based installs. Also dl the most current ktoonsz 4.3 tw kernel. The version in Omega did not work well and a fresh install is best. Also dl any mods you like, such as those you might use with HD or other 4.3 TW roms.
1. Using recovery, I use TWRP 2.6.3, be sure to make a back up nandroid of your current rom.
2. Wipe. A full factory wipe is best.
3. Flash Omega v. 19 and the new ktz kernel and wipe cache and Calvin for good measure (not absolutely necessary).
4. Reboot, set up and give the rom some time to set up and load your backuped apps from the playstore.
5. Go back to recovery and flash your mods.
If you are brave or foolish, restore only the data from your 4.3 or 4.2 TW Nandroid.
If you start getting fc's then wipe data, and reload your data and apps manually from the playstore and or from Ti backup. I found that data from my HD 12 Nandroid was compatible with Omega. I was using the S4 UI in HD v. 12, not the Note 3 UI; and data from other setups may not play well with Omega v.19.
That's it. Easy peasy. Have fun!
Sent from my Xoom Wifi using Tapatalk

Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings

lazepr said:
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
Click to expand...
Click to collapse
Actually it was with MDK. For MJ7 you need Safestrap.
Sent from my Xoom Wifi using Tapatalk

lazepr said:
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
Click to expand...
Click to collapse
they should be there... if not grab the apk from the play store
i chek in on this bad boy everyday or every few at least and with over 550 downloads (thousand views) and only 2 pages for a thread this rom must be pretty damn stable otherwise thered be floods of ppl i think? anyway thanks for trying it guys please post some ant benchmarks with pics in here or any of my roms i'd appreciate it the whole Unmatched quote in HD bugs me as all my roms score higher and are faster and work just as well on battery so i dont know what their talking about just want confirmation of this plz guys

gigilie said:
OMEGA v19
FIGURED WITH INDIE RELEASING HIS 4.4 LEAKED ROM I had better let you guys enjoy it a bit before the v20 4.4 and an unloked bootloader port heh, joking probably wont see her for a bit boys and girls so enjoy what you can while you have it. btw thats 4.4 that triggers knox but ima try it later since I've triggered it messing with SS trying to get zips working for people over last cpl weeks... im sure well see 4.4 tw soon enough til then enjoy.
This is a follow up to my v18 ROM any problems or issues try first searching that thread for info then post issue or problem herein v19's thread please.. http://forum.xda-developers.com/showthread.php?t=2591648
thanks testers of my original port v18. of course ...indie... genius and the rest of the omega crew. thx ppls
like all my new roms this is multicarrier friendly meaning you might have to flash your modules and possibly modem and apns to get full service but its very easy to do and nearly all files possibly needed for this conversion are available at http://www.androidfilehost.com/?w=devices&uid=23269279319201630 along with various other mods and rom ports.
Installing is straight forward: zip is for slots 1-420 and the restorable install is for any slot including STOCK!!!
And this wont hurt your phone or leave incompatability issues like other SS roms may have done. Plz post problems issues here not on indies or any other omega forum. Thanks must be given to indie and anyone he says I just ported this one was the easiest one I've done and has been 100% successful for everyone I personally installed for. Be sure to +thank me or indie or Download another rom.
Install by running zip from Safestrap or TWRP. Untested on CWM. After installing if not a MK2 VZW user you will have to flash your Safestrap modules and modem and apn if all else fails. This installs the best on a fresh rom slot ie newly created / blank.
Zip DL:
http://www.androidfilehost.com/?fid=23311191640114279
SS RESTORE DL:
http://www.androidfilehost.com/?fid=23269279319202601
Install: unzip the backup files in the zip to a folder like /TWRP/backupsi/141fa3db/ndie-Omega19bygogolie no matter where the files need to be one level in a directory named something and your TWRP/SS backup directory needs to read from that location if you cant figure this out you probably should not be installing a custom anything. Once files are where you want them pop into SS/TWRP and restore these to any slots butt even STOCK. yay ok bed time ill update and make pretty maybe later.
I HIGHLY RECOMMEND USING THE RESTORE VERSION OVER THE ZIP. PERSONALLY I THINK ITS SAFER MORE COMPATIBLE WITH ALL PHONES WITH 3.7+
hi haters.
thx wip testers and omega crew clans. thx again hashc0de and surge ur my heroes your works been a godsend
Omega v19 Opening Post
Changelog:
Based on firmware XXUEML6 Android 4.3 (Date: 19/12/2013)
Kernel talexop v1.3
New:
Notification Manager by RYO Software - Omega Rom users can monitor 3 apps instead of 1, thanks and credits to bartito for this gift to us
Added:
Google Drive
18 new csc to Omegas Multi csc
Updated:
Kernel talexop v1.3 with MKF ramdisk
Accounts Sync Profiler
ChatON
Dolphin Browser
Flipboard
Tripadvisor
Rom is Deodexed + Rooted + Zipaligned
Rom is No Full Wipe
Click to expand...
Click to collapse
Failed due to "no partition selected." I noticed on second try that the usual check box partition options was blank. I tried mounting all the partitions to no avail. Please help--thanks
Edit: I forgot to mention it is the Restore version.

Related

[ROM][VIEW]CleverNameHere Rom RLS 1 - Updated 11/1/11

CONTRADUDE PRESENTS
CleverNameHere Rom Release 1​
This rom is discontinued as I have moved on to the Nexus 7. God Bless, everyone!
This ROM is based off of the Evo View 4G's 2nd OTA (security update) and was created with DSIXDA's rom kitchen. Special thanks to pardonmyfreedom for figuring out the view's mount points.
Features
Rooted
Busybox
Deodexed
Zipaligned on boot
Ad Free Hosts file added
Bash shell & nano installed along with sysro/sysrw scripts
Added custom boot animation (found about 4th hand, will give credit when I can find original owner) and switched the shutdown animation to the stock HTC one
Hardware Accelerated UI
Dalvik heap increased
Filesystem Tweaks
SD card speed tweak
Juwe11's ram optimization script
New Market
Removed most of the bloatware (including teeter, which i'd forgotten before), and left blockbuster, qik, polaris office and sprint nav in data/app so that it can be easily removed if you prefer to do so
Disabled HTC update checking
baked in facebook, google+, es file explorer, Titanium Backup & Mybackup Root, Onlive Viewer, Dolphin Browser HD
Skype for chat included, along with enabling bluetooth headsets
Features in optional theming zip (coming soon, need to rebase off of OTA2)
Crysis Battery Mod
running test icon set
Changed off green (HTC Color) into actually green on loading circle and download bar
Green Overscroll
Please help me test this rom for a couple of days while I'm continuing to add features as well as offer suggestions for improvements. I already have a few in mind as well, just need to continue working through them. I'm also looking for anyone who has theming experience since I'm an IT guy and not a graphics designer ;-)
Downloads
RLS 1 @ Goo.im
Older Releases
Removed until alternate hosting is arranged
Screenshots
waiting on screenshots here until the rom has theming built in.
Benchmarks
The results speak for themselves
Quadrant Scores for Beta 2:
1882,2181,2093
Quadrant Scores for Beta 3:
2407, 2528, 2515
Pre-Installation Instructions
Make sure your HTC Evo View 4G is S-off and has a recovery installed, the best way to do that is to follow this guide by Globatron. You also need to have an SD Card in your view in order to be able to flash things through Clockwork Mod.
Installation Instructions
The betas of this ROM will wipe data, so I recommend backing up important information in MyBackup Root and Titanium Backup. The Full Releases (RLS 1, RLS 2, etc.) and Release Candidates (RC1, Etc.) will not wipe data, but if you're coming from stock or just want to make sure your devices is clean, do a factory reset from within clockworkmod recovery between steps 3 and 4 of the guide below.
Copy the Rom .zip file to the base of your SD Card, not the internal storage of your View
Boot into your tablet's bootloader by holding volume down & power while unit is powered off
select recovery by using the volume arrows and hit power to select
you should now be looking at a black screen with blue text, if not make sure you followed the S-off guide. using the volume keys to navigate and power button to select, select install zip from sd card using power
select choose zip from sdcard
select the clevernamehere .zip file on your sdcard
navigate down to the option that says 'Yes - Install clevernamehere*.zip' where * is the name of the version of the rom (eg. beta1)
Rom will now install and run it's course. The script will be more verbose then it is now by the final version
select the +++++Go Back+++++ option
now select reboot system now and the view will reboot. this will take a while, just like it did when you took it out of the box.
Rom is now installed and working! let me know if you find any bugs or have feature requests.
Removing all user data before installing a new rom (Factory Data Reset)
Boot into your tablet's bootloader by holding volume down & power while unit is powered off
select recovery by using the volume arrows and hit power to select
you should now be looking at a black screen with blue text, if not make sure you followed the S-off guide. using the volume keys to navigate and power button to select, select wipe data/factory reset.
navigate down to the option that says 'Yes -- delete all user data' and select it. This will wipe ALL of your data and the data will be unrecoverable after this unless you have backed it up using Titanium Backup and Mybackup Root.
device will now wipe itself and take you back to the main clockworkmod menu. continue on from step 4 of the above guide to flash the rom if you already have the .zip on your device.
Uninstallation Instructions (going back to stock)
Download the shipped rom RUU from here. This was posted by Football on the Flyer Shipped ROMs list here
with your tablet powered on, plugged into your computer via USB, run the RUU. It will take over after you confirm you want to 'update' and format you back to almost completely stock (I was still s-off but I had lost root of course)
go ahead and update your tablet back to the latest OTA (the first OTA) using software update on your tablet.
now go to this thread by attn1 about getting clockworkmod back as well as root. don't forget the view is named the express and DO NOT download anything from this link that has flyer in the name
you are now ready to flash another rom or reflash mine
im giving this a try ill report back....
Thanks! Let me know what you think. I have a few ideas for speed improvements and I will for sure have a more descriptive flashing script
Sent from my SPH-D700 using XDA App
so far so good
a few questions though
Can you turn 4g service on automatically
is this going to be a sense or senseless rom or both?
any plans on removing the default sprint crap bundled with the phone?
rom name recommendation ContraView Rom
burry said:
so far so good
a few questions though
Can you turn 4g service on automatically
is this going to be a sense or senseless rom or both?
any plans on removing the default sprint crap bundled with the phone?
rom name recommendation ContraView Rom
Click to expand...
Click to collapse
Removing sense is always a large undertaking. I'll tackle that at a later time, so sense for now. Beta 2 is going to remove as much as possible and put it into a zip for the few users who might actually want it. I'll look into having 4g autostart as an option. Thanks for the name suggestion.
Sent from my SPH-D700 using XDA App
Beta 2 is now uploaded. I have been working on theming and it is quite a bit harder on sense based roms than it is on touchwiz. I'll also upload the removed apks as a zip file tomorrow.
Since there are currently only 2 roms specific to the View I thought I would give yours a try as well as the XPRS rom. I really dig that boot screen. So far everything seems to be smooth without any issues. I am running it with the ADW Ex launcher and all of my primary apps work well including netflix..
contradude said:
Beta 2 is now uploaded. I have been working on theming and it is quite a bit harder on sense based roms than it is on touchwiz. I'll also upload the removed apks as a zip file tomorrow.
Click to expand...
Click to collapse
If you need some help let me know, im almost done skinning all of i00 rom. Im not sure if its the same for the View but fusion.apk and rosie.apk wont compile with m10 editor, just fyi.
Sent from my HTC Flyer.
great start to roms
Scabes24 said:
If you need some help let me know, im almost done skinning all of i00 rom. Im not sure if its the same for the View but fusion.apk and rosie.apk wont compile with m10 editor, just fyi.
Sent from my HTC Flyer.
Click to expand...
Click to collapse
I like the unlock for the view just need come custom themes now thanks
Where is the download link.
Sent from my PG41200 using Tapatalk
Scabes24 said:
If you need some help let me know, im almost done skinning all of i00 rom. Im not sure if its the same for the View but fusion.apk and rosie.apk wont compile with m10 editor, just fyi.
Sent from my HTC Flyer.
Click to expand...
Click to collapse
I'd actually love some help skinning once I hit feature complete right before the RC. I'm headed there pretty quick, just have a few tweaks that i'd like to get implemented first
Sent from my SPH-D700 using XDA App
fcoco32 said:
Where is the download link.
Sent from my PG41200 using Tapatalk
Click to expand...
Click to collapse
It's the link listed as beta 2 @ multiupload under downloads... I'm uploading beta 3 tonight as well. Just need to finish working on it
Sent from my SPH-D700 using XDA App
contradude said:
It's the link listed as beta 2 @ multiupload under downloads... I'm uploading beta 3 tonight as well. Just need to finish working on it
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Aye c-dude any chance of a change log for those of us wondering? Thanks for the ROM. We need more View chefs and your contribution is DEFINETLY appreciated!!!
Why the hate for stock?
Do you have a completely stock updated rooted ver? What base are you using?
Edit: This was not meant to as disrespect to you. Thanks for all the hard work. The talented devs are the only reason we have this community today.
ContraDude thanks for all the hard work on this rom as its really the only rom we have on the view that is currently being worked on, once they have the kernel source released I know some devs who are willing to make some kernels for our tab. However, one request that I have which you may be able to figure out, as I could not, is how to get the android market to install apps it says arent compatible. I originally thought that changing the fingerprint would fix the issue however I have changed the fingerprint to several different devices and currently have the fingerprint showing the tab as an EVO 3d to the android market. Unfortunately this still doesnt get apps like facebook, go sms, or other apps to show up. I have attached a screenshot that shows my tab showing up as an evo3d. Also I believe that it may have something to do with other lines in the build.prop that show that the device is not a phone, not sure where those are. However I did completely take out an reference of the model number, product, and brand to mirror those from the build.prop of my evo 3d, so I changed more than just the fingerprint and it still doesn't work.
CrippleB said:
No one is willing to do their own dirty work anymore. What happened to if you don't want it uninstall it now that you have root. Do you have a completely stock rooted updated ver? I cannot find a 2.3.4 stock rooted rom for my wife's view.I saw you removed teeter which my kids love, kept in blockbuster, polaris, and telenav(no good without premium gps fee) which I don't use. I cannot take any Ota's without causing problems so I am still 2.3.3. But every rom maker out there is all about remove this and remove that. I for one have no problem removing stuff I don't use, and on the other hand do use some of the bloat apps everyone is so "remove happy" over. Sorry for the rant but it used to be the user removed what they didn't want. I thought that is what root was for. Thanks for your time.
Click to expand...
Click to collapse
Thanks for being a sterling example of everything that's wrong with XDA. You complain that people don't do their own work, then complain when you have to do your own work?
If you wanted a rooted stock rom, why are your looking at custom rom's? Run the s-off tool then flash the zip that gives you root. At that point you have a rooted stock rom.
pardonmyfreedom said:
Thanks for being a sterling example of everything that's wrong with XDA. You complain that people don't do their own work, then complain when you have to do your own work?
Click to expand...
Click to collapse
Thanks for being an example of the majority of XDA users, quick to flame and not help. Yes the rant could have been left out but that was my opinion on removing apps. No one can say what the next guy will or will not use, just pointing out somewhere it was agreed that stock apps were bad. I learned with the 3d that some bloat apps are system and will not install correctly with the normal installation of apk's(reader being one of them). I can put these back into system myself as I have done it many times already. No disrespect was aimed at anybody but it seems you are ready to fire back at a moments notice.
ElAguila said:
If you wanted a rooted stock rom, why are your looking at custom rom's? Run the s-off tool then flash the zip that gives you root. At that point you have a rooted stock rom.
Click to expand...
Click to collapse
Custom roms can still be custom without removing stuff. It's the added tweaks that make them custom. And I am currently Stock rooted.

clarification on installing Omega Rom

Hi Guys
I have decided my first Rom will be Omega.. hoping I an keep it for ages as I dont relish jumping from ROM to ROM.
I have read lots of posts about Omega and the official thread but I still cant seem to find a complete step by step installation guide.
is the newest version v28? it says on the thread (Indies thread)
Please read the following before flashing v28:
1. Make sure to make and keep in a safe place an efs backup, in case you need to restore it.
Uderstood
2. If you want to flash theme or kernel, please make sure first they are compatible with Jelly Bean Omega
Understood
3. Please update Omega Files to v1.03 from Play Store More additions to v1.03 will be added soon.
I have to download the Omega Files app BEFORE flashing the ROM?
4. Get New Play Store from here: Play Store v3.9.16 - install via CWM Recovery
Fine but when do I flash this? before or after flashing the ROM
5. Contacts mod with Greek index, download from here and flash it with CWM Recovery.
Dont know what this is about?
Ok clicked the link in the sig to be taken to where the Omege Roms are, there is JB and one for ICS. i assum its the JB one i go for if i want JB
do I flash using Odin or do I boot to recover and install from SD?
currently just running stock rom..all i have done do far is rooted phone installed CWM and Titanium and busybox oh and Rom Manger
GT-I9300
Android 4.0.4
Kernel Version 3.0.15-928452 - user
Build IMM76D.I9300XXBLH3
Hi
Dl the omega .zip file, then flash it via the recovery.
The kitchen app must be updated after the flash. For the playstore, it's the same flash it after.
I don't know about the contacts. Maybe someone else can help you.
Don't worry, it's very simple with this rom, moreover you got AROMA so you will be able to choose some option at the installation.
Send us a message when you succeed
Envoyé depuis mon grand tapatalk !
Kobrax said:
Hi Guys
I have decided my first Rom will be Omega.. hoping I an keep it for ages as I dont relish jumping from ROM to ROM.
I have read lots of posts about Omega and the official thread but I still cant seem to find a complete step by step installation guide.
is the newest version v28? it says on the thread (Indies thread)
Please read the following before flashing v28:
1. Make sure to make and keep in a safe place an efs backup, in case you need to restore it.
Uderstood
2. If you want to flash theme or kernel, please make sure first they are compatible with Jelly Bean Omega
Understood
3. Please update Omega Files to v1.03 from Play Store More additions to v1.03 will be added soon.
I have to download the Omega Files app BEFORE flashing the ROM?
4. Get New Play Store from here: Play Store v3.9.16 - install via CWM Recovery
Fine but when do I flash this? before or after flashing the ROM
5. Contacts mod with Greek index, download from here and flash it with CWM Recovery.
Dont know what this is about?
Ok clicked the link in the sig to be taken to where the Omege Roms are, there is JB and one for ICS. i assum its the JB one i go for if i want JB
do I flash using Odin or do I boot to recover and install from SD?
currently just running stock rom..all i have done do far is rooted phone installed CWM and Titanium and busybox oh and Rom Manger
GT-I9300
Android 4.0.4
Kernel Version 3.0.15-928452 - user
Build IMM76D.I9300XXBLH3
Click to expand...
Click to collapse
3. If this is your first Omega install, then simply update the Omega Files App through playstore once your Omega install has been complete.
4. You can flash the playstore at any point before or after. I would suggest after you have installed Omega Rom.
5. If you dont know, prolly dont need it so dont worry about it. Sorry I personally have no clue what it is.
Reboot and flash zip via SD, Very easy to install with the Aroma Installer.
thanks done now with no prolems.. i think
however even though i went for the Bloatware removal installation and i did a factory reset through cwm recovery, then wiped cache then delvik cache, under storage it says i just have 6.5gb remaining even though the list above adds up to nothing really due to bloatware removal. seems the storage for my phone prior to flashing rom is still stored somehow?
Any thoughts on why and how i can fix this?
edit just installed es file explorer and under SD card all my apps are there prior to flashing ROM, although not showing in dock
I just deleted everything manually of the SF card
is Omega v28 supposed to be only have 11GB total space even wIth the bloat ware removed.mine shows 11GB free now thought it would be n more though
I am really looking the ROM though, quite slick.
Sent from my GT-I9300 using xda app-developers app
11gb sounds about right. It doesn't sound like the factory reset worked 100%.
Sounds like you got it sorted now.
Now enjoy adding themes and mods!
Sent from my Jelly Omega SIII using XDA App
I am indeed
Just flashed Siyah Kernal, 15 toggles (love it), and Blue theme..
I need to just get my head around the Stweaks now so I can sensibly try some overclocking.. saw a guy on youtube who has this overclocking pull down notification with a nifty little schedule that could overclock/underclock depending on the situation. I'd love to know if that is something available through the Omega ROM?
Haven't heard of that app personally. ...
I have undervoted my phone to -50v and very impressed with battery life. Generally get 5+ hrs of screen time and 2 days on 1 charge.
Haven't tried overclocking as it runs smooth as is
Not sure which blue theme but give motomoto blue a go if your not using that 1
Sent from my Jelly Omega SIII using XDA App
Yes its Mottomoto I haev installed. love it.
the overclock app I saw that lets you set profiles is called Android Overclock from Playstore. Its not free though its £1.49. looks like the one i saw though.. havent bought it. i'll see what I can do from the Stweaks first once I figure out how to use it
Once problem and it seems the only problem I see is that the battery life has depleted to 60 % since 7am. thats just a bit of browsing and installing the Siyah Kernal and Mottomoto theme and 15 toggles.
Normally I play resource intensive games on a 40 minute commute, plus calls, internet and streaming to spotify and on stock I would have close to 80% by the 9am.. and maybe 75% by now. so seems to be depleting rather fast. All connections off, sync off and auto brightness set to minimum..
any thoughts?.. I am using the Siyah Kernel from the Omege Kitchen.

★ [Rom][N5110-CMG2][4.2.2] Stock Root Deodex [07/17/13]★

This is a Deodexed Version Of the newest JellyBean 4.2.2 Leak N5110XXCMG2
Features:
Rooted
insecure boot.img
BusyBox
Zipaligned
Deodexed
Init.d support
adb as root
Bash
Nano
Download: http://www.androidfilehost.com/?fid=23050663588004205
md5: 0386dd0afe5fd788ae2486b7820cfddd
Disclaimer: nothing has been edited this is a full stock rom that you would expect to get from samsung just rooted and deodexed for easy modability,themability
Thanks to:
SamMobile - for the basefirmware package
Dsixda - for the kitchen used to deodex
ChainFire - for superSU
FYI- i will be making me JellyBeans Rom with this base
Welcome back .
Is there much difference between this version and civato other than his has Aroma installer?
2swizzle said:
Welcome back .
Is there much difference between this version and civato other than his has Aroma installer?
Click to expand...
Click to collapse
this is pure stock deodexed nothing removed, and has adb as root. also doesnt have any mods
thank you for posting this here! :good:
Many thanks!
Thanks for this! Works great, feels more fluid... Except doesn't seem to fix the touchscreen deadzones that occur intermittently (but of course that's for Samsung to take care of)
How this update should be installed? Adb?
Edit. Sorry, never mind, this is for N5100 but I have N5100. Waiting for new version for my device.
I am interested in loading this rom on my wife's tablet. I have been flashing rom's on my Motorola Phones for years now and am very comfortable doing so, but a real Novice when it comes to Samsung.
I am on 4.1.2, insecure loader. I have tried both CWM and TWRP recoveries and can use either. I have also used Odin as well.
Question, do I need to wipe data first, and how do I load this rom onto a Samsung Device.
Sorry for the trouble, but I am a fast learner and will be on board soon (I hope)
BobC43 said:
I am interested in loading this rom on my wife's tablet. I have been flashing rom's on my Motorola Phones for years now and am very comfortable doing so, but a real Novice when it comes to Samsung.
I am on 4.1.2, insecure loader. I have tried both CWM and TWRP recoveries and can use either. I have also used Odin as well.
Question, do I need to wipe data first, and how do I load this rom onto a Samsung Device.
Sorry for the trouble, but I am a fast learner and will be on board soon (I hope)
Click to expand...
Click to collapse
Since this is an OS upgrade (4.1.2 to 4.2.2) a data wipe is highly suggested. Frankly, I would suggest wiping system, data, cache and dalvik just for good measure. If she wants to keep a lot of the apps' progress/settings she has, I would install Titanium Backup and back up all user apps first before doing anything. She may have everything synced with her Google account as I believe you can sync apps and their data through Google now, but I haven't tested it yet.
To install the ROM, you'd just need to put it somewhere locally on your tablet, I have a '000Flash' folder on the root of my internal SD storage for any ROMs/kernels/modems (on my phone), etc. Place it in there, then get yourself into recovery. Once in recovery, wipe everything I mentioned above, then go back to the install/flash option of whatever recovery you're using. Flash the .zip file you just downloaded and put locally on your tab. Wait a few minutes and boot her up!
Just make sure you have the right software for the right version tablet you have, N5110 vs N5100.
hayzooos said:
Since this is an OS upgrade (4.1.2 to 4.2.2) a data wipe is highly suggested. Frankly, I would suggest wiping system, data, cache and dalvik just for good measure. If she wants to keep a lot of the apps' progress/settings she has, I would install Titanium Backup and back up all user apps first before doing anything. She may have everything synced with her Google account as I believe you can sync apps and their data through Google now, but I haven't tested it yet.
To install the ROM, you'd just need to put it somewhere locally on your tablet, I have a '000Flash' folder on the root of my internal SD storage for any ROMs/kernels/modems (on my phone), etc. Place it in there, then get yourself into recovery. Once in recovery, wipe everything I mentioned above, then go back to the install/flash option of whatever recovery you're using. Flash the .zip file you just downloaded and put locally on your tab. Wait a few minutes and boot her up!
Just make sure you have the right software for the right version tablet you have, N5110 vs N5100.
Click to expand...
Click to collapse
Thank you very much, the same as I am use to really. I do have my system backed up, as well as Titanium Back UP for apps and data. So should be fine. I do have the N5110
BobC43 said:
Thank you very much, the same as I am use to really. I do have my system backed up, as well as Titanium Back UP for apps and data. So should be fine. I do have the N5110
Click to expand...
Click to collapse
No problem, shouldn't be too different than what you're already used to, but I can understand the need for clarification when it comes to different devices as they're all a little bit different.
OK, on 4.2.2, no problems at all after I found how to turn debugging mode on. THAT IS STRANGE
BobC43 said:
OK, on 4.2.2, no problems at all after I found how to turn debugging mode on. THAT IS STRANGE
Click to expand...
Click to collapse
Hello!
Can you please share how to turn on debugging mode? Thank you in avdavauce!
Sent from my GT-N5110 using xda premium
gqinside said:
Hello!
Can you please share how to turn on debugging mode? Thank you in avdavauce!
Sent from my GT-N5110 using xda premium
Click to expand...
Click to collapse
Settings / About Device /
Then tap the build number 7 times. As you are getting close to 7 taps, the screen will tell you how many more till you are in development.
BobC43 said:
Thank you very much, the same as I am use to really. I do have my system backed up, as well as Titanium Back UP for apps and data. So should be fine. I do have the N5110
Click to expand...
Click to collapse
Also you will need to have CWM or TWRP installed as a custom recovery for it to work. There are plenty of options for installing and the new versions that are non touch should fix any issues uyou had previously. Happy flashing!
Sent from my GT-N5110 using XDA Premium HD app
Yo Nate Dogg!!!!
I am Here!
Now we can get Jammin on this one too!!!!
I will be Flashing this on Friday, Looking around the hood now just seeing what is what on this Note 8!
Get some of that fly a$$ **** from the Note 2 over here! lol
Piece my brotha!
See you soon!
~B
@beanstown106
I'm all rooted and running the ROM...
This ROM definitely needs a little TLC...
How about putting a list of requests together so maybe we have an Idea of what we can expect?
Here is a thread for customizing this ROM!!!​
Here is a link to the Google Edition 4.3 Camera
This works I have it installed. and it is pretty sweet. (even on a 5mp Camera)
I installed xposed framework today and it works well on this ROM. Has anyone else tried this?
You can go here for other mods to add to it...
After you have the Xposed frame work installed you can install the app_settings see attachments, to modify the per app DPI settings.
example, you open up app settings go to gmail, set the dpi to 160 & screen (dp): 1000x1600
I did this for System settings as well and they look nice.
Play around with it and we can build on it...
You can find other mods that you can see if they work and build a list in a new thread. REMEMBER TO BACK UP FIRST!
Ge the disabler in attachments to flash in case you get into a boot loop. These work well since this is a stock ROM.
NottachXposed works very nicely for this ROM... You just have to play with it a little bit, but you can tweak it out nicely...
Don't forget to grab the Multi-Window Manager over in the Themes and app section. It works Great Without any flaws so far...!
If you need a 3-way reboot menu, here is an excellent app here for that...
Knock it Off Please
OK, please stop with all the "bad-mouthing" and "trolling" and... the "Off-Topic" posts. You know the rules, especially in the Dev Forum.
You wanna post garbage or talk about who's gonna do what, then go to the main Android "Off Topic" forum.
Thread cleaned. (please don't make me come back in here again)
MD
Thanks for the deodexed, recovery flashable rom. I just flashed it and got everything set up. So far everything is running great.
Sent from my GT-N5110 using Xparent Green Tapatalk 2

[ROM]FOXHOUND DIAMONDDOGS 3.65UPDATED4MDKtoMK2&AnyCarrier-SS-NOKNOX-CLEAN-FAST-THEMED

[ROM]FOXHOUND DIAMONDDOGS 3.65UPDATED4MDKtoMK2&AnyCarrier-SS-NOKNOX-CLEAN-FAST-THEMED
Gogolie'sROM Port: Foxhound Diamond Dogs 3.6 MDK THRU MK2 COMPATIBLE & ANY CARRIER COMPATIBLE = VZW - AT&T - TMO - SPR THERE IS NO FORCED KERNEL OR MODULE INSTALL! (NECESSARY FOR SAFESTRAP PLEASE MODERATORS DON'T MAKE ME INCLUDE ONE ITS NOT NECESSARY FOR OUR PHONES!)
This very quick little TW rom is awesome its my daily. New update allows for zip install to any slot on SafeStrap or through any custom recovery. AT&T and other carriers may need to flash your MK2 modules or add in TMO APN/ AT&T APN / SPRINT APN settings to get this beast working 100%. If that didn't fix your problem then you need to install the GSM / LTE carrier modem (just guessing that your GSM if you can't get this going as thats been only complaint of lost data and he was able to fix it with proper carrier modem). If these options are too difficult I'll be posting my own comp packs for major carriers below in download sections zip install immediately after installing ROM.
Known issues/Not Working (only for select users):
No known issues exist, if you find a reoccurring bug that has not been addressed here or in the Int section please post.
Issues with not having "stockish on stock slot" may occur by having a heavily modified/themed ROM in stock slot using SafeStrap.
If it doesnt work for you I'm sorry your best bet if your on VZW is SS but with thousands of downloads and hardly any issues across the board with the 1st release I think that speaks for itself... ALL My ROMs rock and are fixed ports or originals and bug free for me or I wouldn't release them. Otherwise this thread would be a mile long like some other Roms that need constant support! Enjoy took me some time to put together so if it works thank me or better yet donate so you can see updates and more roms!
This is a port of the Foxhound Diamond Dog Team's v3.6 w/ ML6 base using a essential only install w a lot of mods and a clean diamond boot animation, included 4.4 apps and a sound/volume mod with the ultra sharp Foxhound theme. Updated all parts of ROM like Xposed / Play Store ect that were giving users some issues before.
Remember I myself nor XDA is responsible for any actions or mistakes or decisions you make with your phone. Installing a custom ROM is a personal decision I say flash it all but thats my decision. However a bit of insight would tell you there is no kernel forced installed like most ROMs try to do so there is much less chance of any errors or issues or bricking because of this. I recommend installing MK2 stock or your favorite kernel and trying and experimenting with this yourself.
Lil about me: I'm a now broke, technically I'm disabled (w/ 4 crushed discs in spine the gov says I'm too young to get disability and shouldn't admit that MMJ medicine works for me they=heartless pricks)I'm a full time single parent of a 1 yr old so Idon't get a lot of time for my passions anymore. ex award winning programmer (lost the love for it, be sure to copyright anything you intellectually own especially when it comes to working with G or MS. they'll steal your everything claim you signed it over and hang you out to dry) now i'm just a fellow android lover with a knack for making things work when they normally won't, experimenting, coding,scripting, anything I feel like doing so if this or any of my other creations or additions to your phone helped you in any way help keep my kid in fresh diapers or put a beer in my hand please. Anything is better than nothing I have spent countless hours learning testing and everything in between to bring you cool stuff like this. Thanks!
PS Sorry to all the fans of my ROM ports I had promised updates and made them but wasn't able to post on here because I didn't offer support or own a sprint phone (even though I fix/root and install my roms for customers of my home business on all national carriers without issues:!) Let em hate eh if I suddenly vanish and stop responding or supporting my threads (give me a few days to respond to PMs and questions) or my accounts not active find me at Infamous Forums. Thanks again for all the donations and support. I do this for the users that like their phones to have options. Not for the money or fame (LOL get treal i love the accusations they funny but come on play nice other devs lying about my stuff)
NEW DOWNLOADS: (Install .zip in any Custom Recovery. Tested on Philz and TWRP.)
UPDATED ZIP FOR "GOGOLIE'S UNOFFICIAL SLIM" VERSION 3.65: LINK(Ignore the .zip header info it says Phoenix 7.3 I forgot to modify its not it is Foxhound DD 3.65 too much work being done to update)
NEW WALLPAPERS TO TRY:
#1, #2, [URL="http://feb.imghost.us/G7oG.jpg"]#3[/URL], #4, #5
ALTERNATIVE LOCKSCREENS:
#1
OPTIONAL GPS FIX INTL: LINK (thx poeypresents/thedoman/jrkruse)
MORE DLs SOON LIKE COMP PACKS FOR SPRINT, TMOBILE AND AT&T **THESE ARENT NEEDED TO INSTALL IF OP IS FOLLOWED
OLD VERSION Download SS/TWRP Install by Restores:
https://docs.google.com/uc?id=0BwL6-n3ZMcedTzY1WFJ4N1dEQ2s&export=download
or
https://docs.google.com/file/d/0BwL6-n3ZMcedTzY1WFJ4N1dEQ2s/
Install:
Unzip into your new SS backup dir into your backup Safestrap folder in a folder like gogolies-Foxhound3.6 make sure all files are simply in 1 folder and that folder is in your backup directory and restore to a ***blank/newly created or STOCK*** rom slot. I went super small as small as SS would allow for slot creation. If your getting an error on restoring be sure to try deleting the slot and re-adding it then restoring the system files. If your WiFi doesn't work try flashing MJ7 or MK2 SS modules but only flash modules after 1st booting up rom and knowing wifi isnt working. 1st boot takes time plz allow a minute after loading up 1st time after 1st boot. Startup time is fastest SS rom I've seen. FH Apps and Settings contain xposed and modules for it and can help u customize and tweak it a bit but are installed as system files and don't let you update easily but it can be done I suggest just leaving it until another release or read down in the thread for details on how to update if you must..
Special thanks to: you fools that downloaded this to help test and found little to no actual issues... or specific user issues... THCX boys!
Surge1223, Hashcode, rarffaele88, snakes, jrkruse, ktoonsez,open1your1eyes, sbreen94, k1mu, old&slow, beanstown106, Dubbsy, invisiblek, nitroglycerine33, jovy23, andybones and anyone else contributing anything toward development!
-gogolie
Screens from VZW:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Below is a copy of what raffaele88 said in his original thread please thank him and anyone associated.
raffaele88 said:
Based on last firmware
Deodexed & Rooted
Unlimited SMS recipient list
Disabled scrolling cache
Removed bloatwares (Available on zip)
Large APN list
Insert Xposed Framework
Battery 1% mod
Insert module for Xposed
DPI Changer
Market multi DPI inverted
Rom are Themed and costumizable with Xposed
Insert Rom Control in Settings
Enabled Call recording
4 Way reboot (Recovery,Download…
Hacked Stock Email App
Latest SuperSu update
Ota Update
Enabled all supported languages
Enabled call button on Contacts list
Auto wipe cache & dalvik-cache before flashing
Insert back button in Browser
Removed boot sound
MultiCSC
Busybox
More...
Installation
Full wipe or without wipe
Essential Rom or Normal
Theme
Foxhound Black theme
Samsung
Keyboard*
Google
Samsung
Camera*
Samsung
Google
Kernel
Stock
faux
Launchers
Nova launcher
Apex
Touch Wiz
Performance Mod
SQlite
EXT4
GPU
Boot Animation
FoxHound Diamond Dogs
Google edition
Font
Foxhound (smaller)
Stock
Google Edition AOSP 4.4 Kitkat
Calculator
MMS
Calendar
Clock
Sound Mod
Viper4Android
Boost Audio
* Both application can be installed
1.Downalod Rom
2.Put in your Phone memory
3.Reboot in Recovery
4.Wipe data in you came from other rom (optional)
5.Select Zip and install
6.Reboot enjoy
LINK
Donate Rya Engel: Link
Donate Denny: Link
Rixsta for theme base link
Nottach for module link
Wanam for kernel
Rovo89 for Xposed framework link
Vertmus for Domination theme
Click to expand...
Click to collapse
Dude you are awesome!
Sent from my SCH-I545 using XDA Premium HD app
looks absolutely amazing man! I will be hitting this up on my next day off, thank you for this!
im confused where to place the folder once i download the zip. i dl'd the zip. extracted it to my phone. made slot 2. went to restore in SS but cant find the folder to restore? how do i go about this?
chrismyu said:
im confused where to place the folder once i download the zip. i dl'd the zip. extracted it to my phone. made slot 2. went to restore in SS but cant find the folder to restore? how do i go about this?
Click to expand...
Click to collapse
unzip the file you just downloaded into the folder where your backups are saved. for me its TWRP>BACKUPS>6056c852.Then you select rom slot 2(or make a slot 2).In the main menu select restore and you should see the file you unzipped with the rest of your backups if you have any. I just did it and this maybe my new favorite! Hope this helps you out
Downloading!
Sent from my SCH-I545 using xda app-developers app
This looks very nice. Looks like I may be updating to mk2 if /when I find the time. Thanks
Sent from my SCH-I545 using XDA Premium 4 mobile app
Working great on MK2 SS AT&T S4!!!!!!!
Is there a possibility of a version for those of us still running mdk/lokid?
Sent from my SCH-I545 using Tapatalk
Mine keeps failing, says no partition selected.
The rom is great but it keeps screwing with my hangouts. One minute it'll work then the next it won't show
Sent from my SCH-I545 using XDA Premium HD app
How do I increase the system partition, when I hit the + sign nothing happens.
Looking forward to another choice!
It looks like a very slim and smooth rom but still packed with features we need. But may i ask why rom slot 2? What, your roms too good for slot 1? , Also, how many ppl on MJ7 have tested it without updating? (Just curious). Thanks again for the new toy!
Got this one up and running and I suppose the others I had tried in the past would work now to.
After some input in various threads by @Surge1223 , it came to my attention that I should try ODIN back to MJ7 and stick there instead of updating to the MK2 bootloader if wanting to run HD RLS12 in stock side which is my preference.
After I did that and restored my Nandroid of HD RLS12 to stock side then had to apply the MJ7 module, all was well.
Created a slot, and this time was able to get this up and running via restore to slot. 1st time of success with that with any ROM whether via Nandroid Restore or flashing to.
Monkeying around with it now, so far so good. One thing I notice is with Xposed Installer, In the settings under 'update' , there is an update available for it but it won't install - says something about package with that name and different signature found.
---------- Post added at 08:43 AM ---------- Previous post was at 08:23 AM ----------
Update: Root Explorer shows nothing as in will not load up directories just black screen?
Update #3: Nevermind about Root Explorer. User error. I mistakenly restored app & data from it via TIBU. I uninstalled and restored App only and all is well now!
shindiggity said:
How do I increase the system partition, when I hit the + sign nothing happens.
Click to expand...
Click to collapse
The system partition size is pre-set in the app code. To my knowledge you can't resize it. Maybe if you rewrote the script but im not there yet. Ppl tend to forget safestrap 3.7x is still beta.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
seems like a sweet rom. I havent had time to restore my apps and what not but im looking forward to a test drive. On MJ7 btw...
Restoring this ROM to my slot failed. I'm rooted on MK2 with SS 3.71 installed. Was able to load the Omega ROM, but not this one.
Sent from my SCH-I545 using xda app-developers app
This ROM is awesome! Super slick and good looking.
You may want to put this in your instructions.
If you can't find where the backup folder is go into safestrap and make a backup of the cache on stock ROM.
Then extract the .zip file to the folder with the cache backup and has allot of numbers and letters on it.
Sent from my SCH-I545 using XDA Premium 4 mobile app
rslu2 said:
Restoring this ROM to my slot failed. I'm rooted on MK2 with SS 3.71 installed. Was able to load the Omega ROM, but not this one.
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
I know I said I wouldnt be offering support on this one but since you were kind enough to try my first omega version that and I really really like this rom over any others and I've ported a good 10 new ones to the phone now
have you tried deleting the slot and then remaking it? not sure why but that seems to work if its failing restore. then just restore system files I actually just had to do this earlier after finishing up omega v19 sorry I am not able to see whats the issue I believe its something with the way safestrap is "formatting" or something. hope that helps no Idea if that doesnt work you might be in the restoring boat like lazer9 had to do that method will work for those unable to install this as is. odin mj7 reroot then ss then whatever. Oh and you don't have to put this on Slot 2 I just included it incase it still mattered in safestrap whether or not you restored to same slot but it does not matter apparently. So install to any slot should work fine probably even stock if someone dared try? same with MJ7 users just flash modules if it doesn't boot up first try. obviously theres some different issues with various parts of the rom plz continue to post your findings guys. I promise nothing but I'll help if I can.
I found the first problem,
For me you can't download apps from play store, any tips?
Sent from my SCH-I545 using XDA Premium 4 mobile app

[Q] Rom with Working 3d and gallary

I am on Virgin Mobile CDMA and looking for a new rom to install. I have been running NegaLite BlueROM,an old rev of it, and its nice but like everyone want more. I use the 3d camera frequently, wifi tethering, and obviously text message and phone calls. What's the best or recommended ROM where all the stock features along with wifi tethering work? I want to be able to view the 3d photos in the gallery as well. What's stable and would be an upgrade to what I am running? If the ROM you suggest has bugs please let me know what they are. Also if the ROM has added features, definitely mention those! Thanks!!
mortimerjd said:
I am on Virgin Mobile CDMA and looking for a new rom to install. I have been running NegaLite BlueROM,an old rev of it, and its nice but like everyone want more. I use the 3d camera frequently, wifi tethering, and obviously text message and phone calls. What's the best or recommended ROM where all the stock features along with wifi tethering work? I want to be able to view the 3d photos in the gallery as well. What's stable and would be an upgrade to what I am running? If the ROM you suggest has bugs please let me know what they are. Also if the ROM has added features, definitely mention those! Thanks!!
Click to expand...
Click to collapse
Here's a modified stock Rom called Midnightrom, I've tweaked it some, along with the kernel. Everything works, follow directions carefully from my posts if you want all to work. I'll help you if you need it. Can download from my drop box, please only download once if your interested. Here's post you can get it all from
http://forum.xda-developers.com/showthread.php?p=53139398
Sent from above using Xparent Tapatalk
Did you tried MIUI rom? You can change themes and also use 3D camera. I'm using it now for 3months beacuse I'm s-on.
PiggyFlooper said:
Here's a modified stock Rom called Midnightrom, I've tweaked it some, along with the kernel. Everything works, follow directions carefully from my posts if you want all to work. I'll help you if you need it. Can download from my drop box, please only download once if your interested. Here's post you can get it all from
http://forum.xda-developers.com/showthread.php?p=53139398
Sent from above using Xparent Tapatalk
Click to expand...
Click to collapse
I just installed the rom using the directions in the link you included. For some reason the goodies and themes failed to load but the music mods installed fine. the goodies said there was an error in one of the files in the zip. the themes said unable to mount sd card after it gave an error code I didn't write down. I still wiped dalvik and installed everything mods. I am re-downloading the 2 failed installs in case they were corrupt. Any suggestions? the unlock ring is missing but can still unlock like its hidden. I have backups so no big deal if I need to wipe again or do something else.
mortimerjd said:
I just installed the rom using the directions in the link you included. For some reason the goodies and themes failed to load but the music mods installed fine. the goodies said there was an error in one of the files in the zip. the themes said unable to mount sd card after it gave an error code I didn't write down. I still wiped dalvik and installed everything mods. I am re-downloading the 2 failed installs in case they were corrupt. Any suggestions? the unlock ring is missing but can still unlock like its hidden. I have backups so no big deal if I need to wipe again or do something else.
Click to expand...
Click to collapse
Okay, I'm going to test. I'll get back to ya soon. Fusion.apk is in the systemUInThemes zip, that'll give you the lock ring, and FrameworkGoodies is other one giving trouble? Have you tried re downloading yet?
Edit- Framework zip was only one not working, this one will-
https://db.tt/Liai0ei4
Don't forget to flash other nicities on that thread
Sent from above using Xparent Tapatalk
I finally got around to trying this again, got super busy with other things. I re-downloaded the original files and used your new link in this post for that file. I am still getting errors on both the goodies and the themes zip files but music mods installed fine. The same error for both files and failed install on both. The error I am getting is "error in /tmp/sideload/package.zip (status 6)) any suggestions? I flashed the midnight rom, rebooted the device all the way to the lock screen and unlocked then rebooted into recovery. Still no lock ring either.

Categories

Resources