I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
[UPDATE] 2/22/2013 11:00pm gmt
I'm able to boot it only if I have it plugged in. I can only use Power + Volume controllers + Reset buttons. I can enter Recovery Mode but I cannot confirm/click on any selection.
Tablet does not get recognized by the computer in "Flashing Mode".
I forced to install the driver for the "Flashing mode" when the tablet is in recovery mode but programs like MSIFlashtool, RKBatchTool, RKAdnroid. (not sure if i correcly used the last 2... but whatever)
spilot said:
I've got an MSI Windpad Enjoy 10" Plus (http://www.msi.com/product/windpad/Enjoy-10-Plus.html) and I tried to flash it this ROM (http://forum.xda-developers.com/showthread.php?t=1540616).
The rom is for MSI Windpad Enjoy 10", while mine is called Enjoy 10" Plus. So GG, I think I got owned. So retarded you don't even have to tell me.
Now whenever I try to turn on the tablet, it would simply vibrate, show the logo and then turns off. PC doesn't detect it.
However, I tried holding Power button + Reset button together, the PC detects it, but it's unknown and it can't identify it (even though I have MSI's drivers installed and all).
...Any ideas on how to overcome it?
I'm going to sleep now, and will check tomorrow. Thanks in advance.
Click to expand...
Click to collapse
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Jack Jake said:
i dont think that that is called brick
anyways go download Odin and the stock image for your phone (in tar format)(just search on XDA)
put phone into download mode nd open odin
select PDA and select the tar file u downloaded
click start and it should take u back to stock
forgot if this unroots ur phone or not so u might have to root again.
Click to expand...
Click to collapse
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Sent from my ARCHOS 80G9 using Tapatalk HD
Quinny899 said:
This is not Samsung or a phone. Read what you are told
If you have a splash screen, you are not bricked. Does adb recognise your tablet? Can you access any recovery/download mode?
Click to expand...
Click to collapse
ADB doesn't recognize it. I tried holding Power + Reset button and did 'adb devices' on Ubuntu and it didn't show anything. On Windows, if I held these 2 buttons, it would show an unknown device in Device Manager. (Mind you, I don't have the Android SDK on Windows, just Linux.)
I can't access any recovery/download mode. Any combination of buttons (Power+VolDown, Power+VolUp/VolDown, Power+VolUP, Power+Home, Power+Back, Power+Settings) would do nothing.
-----------------------------------------------------------------------------------------------------
This what it does when I press Power + Reset Button with a needle. It boots up, splash screen, and stays on black screen (Btw, in this stage, it's Unknown Device in Windows Manager).Once I let go of Reset or Power button, it shuts down.
Turning it on without holding Reset, it would show splash screen, black screen and turns off in about 2 seconds.
Bump.
I've tried playing with it for some time. I can't get it to stay working without pressing power+reset buttons, it always shuts off...
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Sent from my Enjoy 10 Plus using xda app-developers app
mramzi said:
Go to the device website, and download section, get the latest firmware and forget to download the flash driver.
Follow the steps that in firmware folder after unzip it, and you'll get your tablet on
Click to expand...
Click to collapse
... I was trying all the time to get it work on the PC without plugging the charger. Anyways~
(Tablet's turned off), I plugged charger, I plugged USB, I turned on the tablet and viola it actually worked and booted into OS. However, no buttons work AT ALL, and touch input doesn't work as well.
I tried to get into Recovery Mode and it worked, but I can go up/down using VolUp/VolDow buttons but I cannot click on any thing because the home button don't work nor any other.
Only Power + VolUp + VolDown + Reset buttons work... What to do now?
TL;DR I want to click on 'Update from SD Card' from the Android Recovery but I couldn't get the 'home' button to click enter on the selection. So what's the solution?
bump.
updates:
I tried to place the firmware from the official website as update.img on an SD Card and placed it in the tablet and went into the recovery mode and selected the 'update from sd card' but i couldn't click it. I tried to tap power, home, search, settings and back and nothing worked.
what I've got up until now:
I can boot into the ROM / RecoveryMod as long as I have the charger plugged in the tablet.
For Ubuntu, when I use the command $ tail -f /var/log/syslog and plug in my tablet, it shows this log http://pastebin.com/pBpBUA2Q (it identifies the tablet) [note, the tablet is booted into the ROM]
Also, if I'm in the recovery mode and I plug in the tablet, it would enumerate the USB... ~,~
Bump
bump
spilot said:
bump
Click to expand...
Click to collapse
Please don't bump your thread more than once in 24 hours, it's against the rules
Sent from my Galaxy Nexus using Tapatalk HD
bump
Hello,
I know it has been long since this thread stopped.
I'm currently in his shoes and for the life of me cannot find anything on the web to help me solve my problem.
My MSI Enjoy 10" Plus was flashed with the wrong MSI Enjoy 10" update. Now the tablet only turns on when in "Recovery Mode", but selecting in that mode is not possible using 10" Plus' buttons. Is there anyone from you good people that can help? Please? Thanks.
Uhm...bump?
Bump? Need help from the experts here. Please. I'm desperate.
Thank you very much in advance.
Hi,
my Pipo M6 per wifi hangs itself while starting, i.e. he gets stuck with the loading picture. Indeed, with the Reset he restarts, however, gets stuck also again. After he gets stuck, he can be also switched off no more, except by Reset.
And I also do not come to the Recovery mode, I thought, maybe helps a new firmware. However, sometimes he registers if I hold the keys while starting low-spirited, that Android little manes with open belly and warning sign. see below.
If I hang him by USB on my Win7 pc, a wrong driver's file is installed constantly, either Samsung or HTC, so that the Flashtools register that no suitable device is connected. With the USB driver of Pipo the pc says that that is no suitable driver's file.
What can I do?
And over again for stupid ones: I come to the Recovery fashion, nevertheless, dur volume press ESC and power at the same time, or?
Please, can anybody help me?
Nobody can help?
Is the tablet an fall for garantie?
Anybody any idea?
Please help.
Try one of the 2 methodes
gnom68 said:
Is the tablet an fall for garantie?
Anybody any idea?
Please help.
Click to expand...
Click to collapse
A This is the easiest way: Do a HARDRESET
Recovery Mode (for Factory Reset):
-----------------------------------------------------------
1. [Reset] (on the backside)
2. [Power] + [Vol-]
3. green Android shows up
4. press [Vol-] + [Vol+] + [ESC] together till Menu shows up (if it's not showing up try to press it a few once more)
OR
B For advanced users: Flash the original Firmware (download from here it is a very slow download )
and use the howto which is delivered within the downoad.
Maybe you can find some usefull information here
Hope i could help u. For me it was working fine.....
I really ****ed up my phone, it was giving me problems so i kept messing with it until i reached the TWRP menu and formatted everything on the phone, when i went to the reboot section of the TWRP menu it said i had no os installed now every time i turn my phone on only the LG logo shows up and i cant get back into the TWRP menu and my phone is virtually useless, can someone please help me fix it :crying:
AwayV2 said:
I really ****ed up my phone, it was giving me problems so i kept messing with it until i reached the TWRP menu and formatted everything on the phone, when i went to the reboot section of the TWRP menu it said i had no os installed now every time i turn my phone on only the LG logo shows up and i cant get back into the TWRP menu and my phone is virtually useless, can someone please help me fix it :crying:
Click to expand...
Click to collapse
if you boot with power button + vol up + home button, enter the recovery menu?
if yes
Download one rom in your sd card and flash it
marciofornari said:
if you boot with power button + vol up + home button, enter the recovery menu?
if yes
Download one rom in your sd card and flash it
Click to expand...
Click to collapse
it doesn't let me boot into Recovery or the TWRP menu when i turn my phone on it gets stuck the LG Logo and when i try to press Home + Down after power the android man comes on the screen with the blue gear then the phone reboots and stays at the LG logo
Hypothetical question: say that I erased every single piece of data on the phone drivers system files operating system etc.. How would I put all the drivers and need information back onto the phone with access to only the SW upgrading mode?
AwayV2 said:
Hypothetical question: say that I erased every single piece of data on the phone drivers system files operating system etc.. How would I put all the drivers and need information back onto the phone with access to only the SW upgrading mode?
Click to expand...
Click to collapse
Power off phone, press volume up (hold it) and connect phone by usb to pc. SW mode should appear and you will be able to flash stock rom by official lg program
Rammar515 said:
Power off phone, press volume up (hold it) and connect phone by usb to pc. SW mode should appear and you will be able to flash stock rom by official lg program
Click to expand...
Click to collapse
Uhm, and maby some idea what to do if phone not going into s/w mode? Just booting to logo, with batery and do nothing without batery
Maby you can help me here: http://forum.xda-developers.com/optimus-l9/help/q-brick-kdz-usb-error-t3027895#post58795671
I have one of these tabs, which will no longer boot up.
I flashed a ROM which clearly will not work on this device..... It switches on and I am now stuck on a screen that looks like the Android man playing in a shower........
I cannot get it to go past this, and I cant get it into bootloader/download mode..... If I hold the Vol button and press and hold power it simply loads to this screen...... I have tried any and every button combination with the same result...
ADB sees the pad when connected to the PC but I am stuck where to go from here. I don't know enough about ADB to try and fix this, if its even possible. The fact I cannot get into recovery means I cannot even put a zip file on the sdcard...... Is there a way to force a flash using only ADB?
Can anyone help me please........
Hi ,
So I got a pendopad 7 from dodo car insurance promotion and while I was trying to remove kingroot and replace with supersu , I think something went wrong and now tablet is in a weird state. It boots up to show nothing but if press and hold power button I can see option to turn off the tablet. I am assuming its something to do with systemui.apk , I was wondering if there is a way to fix it without rom install as I dont have any backup or the image to restore this tablet.
Its A-33 Quadcore Pendopad 7 PNDP51M7BLK
Ram 1 gb
Android 5.1.1
1024 x 600 px
http://www.pendo.com.au/pendopad-7-q...k-pndp51m7blk/
If anyone has this tablet or rom or any method to bring it back to life. Any help is appreciated.
I can acces the normal recovery on the tablet and have tried resetting it but doesnt help .I cant find the factory image for this device
Thanks
any help please ????????????
max414 said:
any help please ????????????
Click to expand...
Click to collapse
You may need more knowledge about this but here is what you can do
DON'T PLUG IN THE DEVICE INTO THE PC YET
Install Phoenix Suit and click the firmware button
Find a firmware image for your tablet. (most likely at chinagadgetsreviews.blogspot.com )
Hold down the power button for 10 seconds and let the tablet sit for 10-20 seconds to insure it is completely off.
ON THE DEVICE:
1: Hold ANY button that is not the power button
2: while still holding the other button, plug in the device to the computer
KEEP HOLDING IT DOWN
3: RIGHT after you plugged the microusb press the power button really quickly around 4 or 8 times and on the computer Phoenix Suite will ask you this:
Tip: Does Mandatory Format?
Click Yes
Click Yes again
It will install the new firmware, if it shows no progress for more than 6 minutes you don't have the right firmware image.
HOPE THIS HELPS
Oh yeah, you will need to re-root the device with KingoRoot PC, and Wifi, or Bluetooth may not work anymore. Sorry about that.