Anyone figured out how
This was the old method, but since wimax is gone it doesnt work, and i cant find a similar setting...
http://forum.xda-developers.com/showthread.php?t=1270687
greggin91 said:
Anyone figured out how
This was the old method, but since wimax is gone it doesnt work, and i cant find a similar setting...
http://forum.xda-developers.com/showthread.php?t=1270687
Click to expand...
Click to collapse
I'm looking to change the LTE settings as well.
sprint tells me I'm in a saturated LTE area, so im assuming that its there, just slightly too weak cuz it only drops in certain areas... if someone could figure this out my life at work would be so much better
anyone figure this out yet?
greggin91 said:
Anyone figured out how
This was the old method, but since wimax is gone it doesnt work, and i cant find a similar setting...
http://forum.xda-developers.com/showthread.php?t=1270687
Click to expand...
Click to collapse
Call Sprint Tech support 888-211-4727 and tell them you need your MSL for your Note 3 and if they question you just tell them you are a developer.
Dial ##3282#
Choose "Edit" and enter your MSL
Go to Edit and to LTE
You can make changes if they are available to change but I am currently on the 4.4.2 KitKat leak and there are no options other than LTE on or off
Not sure if there were options on 4.3 cause I never needed to edit them.
This is what I found and messed with
Sent from my SM-N900P using XDA Premium 4 mobile app
I tried to make this with one post sorry
Sent from my SM-N900P using XDA Premium 4 mobile app
Timer menu, im not sure if this is what yiu were to trying to get to?
Sent from my SM-N900P using XDA Premium 4 mobile app
Related
Flashing Prl is easy...but I need nv items
3G is not working only talk and text
Can anyone point me in the right direction
Sent from my PG06100 using XDA App
I never even heard of these carriers. If I was you, get a phone that works on them, get CDMA master...read the setting in the software once you get it set up and reading the phone. From the other phones setting...put into evo 3d...this will take care of your question
I was thinking about that. Ntelos runs on sprint's. Network ..wonder if ha and AAA password is needed...
Sent from my PG06100 using XDA App
I'm going to maybe get a cheap phone with them today.
If anyone else have info getting 3g, mms working on EVO
Please post or PM. Thank all for the help
Sent from my PG06100 using XDA App
dirtysausage said:
I was thinking about that. Ntelos runs on sprint's. Network ..wonder if ha and AAA password is needed...
Sent from my PG06100 using XDA App
Click to expand...
Click to collapse
Really don't know this one..
life64x said:
Really don't know this one..
Click to expand...
Click to collapse
No Problem. I'm still searching for the answers
there's a small shop around me that flashed my evo 4g from sprint to ntelos. still had the problem with mms( APNs) , a post on here solved that. One day i'll fully understand how to, small reads at a time.
Every time I try to make a call I get that, and my signal shows no bars with a X is there a setting I have to change to get my network back? using Cm7
*#*#4636#*#*
Change your setting to CDMA auto in the phone information menu.
Sent from my MoPho. All typos are the phones fault.
Jo_795 said:
Every time I try to make a call I get that, and my signal shows no bars with a X is there a setting I have to change to get my network back? using Cm7
Click to expand...
Click to collapse
If your rooted use roam control.
I have two bars intill I answer the phone. Then Click. Great signal roaming.
Sent from my MB855 using xda premium
Do you think that the APN settings might have something to do with it? Maybe you will wana look into that
rbeavers said:
If your rooted use roam control.
I have two bars intill I answer the phone. Then Click. Great signal roaming.
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Can you post a link to this? I looked on the market and can't find it
Sent from my MB855 using XDA App
I have read people saying to use the minimalistic text trick to access these menus but not familiar with the app or trick well enough to do it and threads are blowing up too fast for me to keep up with. Anyone kind enough to share how to? Thanks
Sent from my PG86100 using XDA
Ugh sorry everyone. I didn't realize there was already a guide in cdma. I just woke up and this was on my mind. You may delete this.
Sent from my PG86100 using XDA
Can you please include a link where you found it? It'll save time for those people that are reading.
For those looking for how:
http://forum.xda-developers.com/showthread.php?t=1637280
Sent from my PG86100 using XDA
Have you figured out how to access roam settings?
I got power settings, but unless I can figure out how to get my phone to give me data while roaming, this is going to suck. lol
I found the booster port by chubbzlou has access to roaming
Roaming is actually under phone instead of settings
Sent from my PG86100 using XDA
gk1984 said:
Roaming is actually under phone instead of settings
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
Maybe I'm looking over something, but I'm pretty sure I've gone through every menu in settings, and the limited settings under the phone "app" and I still don't see roam settings... You were able to find them in the phone app?
EDIT: For clarification, I'm not running the Booster ROM.
Is there any way to disable LTE yet on the S3 from AT&T? Widget, APN Add, etc??
Thanks!
I need that too for a better battery life.
Have you tried going to dialer and entering*#2263#. On Canadian model you can do this.
Sent from my SGH-I747M using xda premium
pterry30 said:
Have you tried going to dialer and entering*#2263#. On Canadian model you can do this.
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
AT&T removed it for reasons I listed in a past post if I am not mistaken. I can rewrite the post later, just in a rush to head off to work
Puts me into service mode, but no options in there - Just says "RAT Selection option is restricted."
My Sprint S3 ran for 20+ hours on 3G without any issues, but since their data is so aweful we went to AT&T and on 4G lte we get 8 hours if we are lucky.
I guess the only other option is to flash a Canadian modem .
Sent from my SGH-I747M using xda premium
My wife is going to kill me I cant blame here, 7-8 hours on a charge is insane if you dont need that speed ....
PensFan66 said:
My wife is going to kill me I cant blame here, 7-8 hours on a charge is insane if you dont need that speed ....
Click to expand...
Click to collapse
or if the nearest LTE tower is hundreds of miles away...
Yes waiting for s Canadian midrm to be avail to test. Aldo waiting for a copy off the att modem in case it fails.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
I will post the telus modem.on weekend. I have to root it and I want to do some backups first before rooting. I have to root so I can pull modem through adb. Will make into a cwm flash .
Sent from my SGH-I747M using xda premium
I could, go into mobile network settings, then you can choose your network mode, Either gsm/evdo auto, or gsm/evdo/lte auto...
thats on the bell version in canada
So apparently there is a problem with using data abroad with another provider's sim. The Acces Point setting is unable to be changed. I was told the S4 had the same problem which just recently was fixed by Samsung in a firmware update.
Nice.... Was really counting on this feature sitting here in Barbados and next week in Spain..
Any gurus here who can fix this?
Sent from my SM-N900P using XDA Premium 4 mobile app
Never mind. Found the fix for the S4 and same applied for our Notes. You do have to be rooted and not afraid to add a snipped of text to the build . prop file..
Sent from my SM-N900P using XDA Premium 4 mobile app
Here is the fix. Only need he build.prop file fixed.
http://www.rimweb.in/forums/topic/3...hing-between-cdma-gsm-in-1sec-without-reboot/
The APN setting screen is still accessible by searching in the settings page.
Sent from my SM-N900P using XDA Premium 4 mobile app
dutchman71 said:
Here is the fix. Only need he build.prop file fixed.
http://www.rimweb.in/forums/topic/3...hing-between-cdma-gsm-in-1sec-without-reboot/
The APN setting screen is still accessible by searching in the settings page.
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I got the success on flash note 3 with the other cdma carrier , without SPC code.
but without spc cant possible to unlock it for GSM carrier.
anyone pl help me to get SPC/MSL code?
dutchman71 said:
Here is the fix. Only need he build.prop file fixed.
http://www.rimweb.in/forums/topic/3...hing-between-cdma-gsm-in-1sec-without-reboot/
The APN setting screen is still accessible by searching in the settings page.
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did not realise someone is gonna use my post ( http://www.rimweb.in/forums/topic/3...hing-between-cdma-gsm-in-1sec-without-reboot/ ) here on XDA, hope it helped.
Most of my gurus are from XDA.
Sent from my SPH-L720 using Tapatalk
Instead of going through all that trouble, In the coming days I'll just post up my modded Phone apk.
Great! Can't wait.
Sent from my SM-N900P using XDA Premium 4 mobile app
freeza said:
Instead of going through all that trouble, In the coming days I'll just post up my modded Phone apk.
Click to expand...
Click to collapse
is this for APN only ? i am facing two issues 1st unable to unlock GSM & 2nd is CDMA flashing done buy unable to flash A-KEY (call dropp issue)
how to get SPC/MSL any idea or app for this?
pl help if you have any solution.
Thanks..
javed91214 said:
is this for APN only ? i am facing two issues 1st unable to unlock GSM & 2nd is CDMA flashing done buy unable to flash A-KEY (call dropp issue)
how to get SPC/MSL any idea or app for this?
pl help if you have any solution.
Thanks..
Click to expand...
Click to collapse
i got mine by asking Sprint.com/chat
they even unlocked my phone.
drewiskee said:
i got mine by asking Sprint.com/chat
they even unlocked my phone.
Click to expand...
Click to collapse
Hi how did they do it with chat? They says can't unlock within 90 days. Did they created case for u? Ot they unlocked right at chat.?
gotojanoo said:
Hi how did they do it with chat? They says can't unlock within 90 days. Did they created case for u? Ot they unlocked right at chat.?
Click to expand...
Click to collapse
Since I've been with them for years they opened a case. And next day they called me and did it..
drewiskee said:
Since I've been with them for years they opened a case. And next day they called me and did it..
Click to expand...
Click to collapse
same here i been with them 10 years. they opened case for me.
gotojanoo said:
same here i been with them 10 years. they opened case for me.
Click to expand...
Click to collapse
you get it?
The 90 day thing is for the phone. If it hasn't been active for 90 days they open a case and call you in 24-48 hours depending on their work load. I had mine unlocked the day after release. It can be done from the international chat. It's different than the regular chat.
Sent from my SM-N900P using XDA Premium 4 mobile app
---------- Post added at 06:01 PM ---------- Previous post was at 05:52 PM ----------
http://sprintworldwide.custhelp.com/app/chat/chat_launch go there to have the sim unlocked.
Sent from my SM-N900P using XDA Premium 4 mobile app
Sent from my SM-N900P using XDA Premium 4 mobile app
drewiskee said:
you get it?
Click to expand...
Click to collapse
Yes I got the instruction from sprint for unlock. It was easy
javed91214 said:
I got the success on flash note 3 with the other cdma carrier , without SPC code.
but without spc cant possible to unlock it for GSM carrier.
anyone pl help me to get SPC/MSL code?
Click to expand...
Click to collapse
How can we use other cdma carrier,plaease help me
heixiuyo said:
How can we use other cdma carrier,plaease help me
Click to expand...
Click to collapse
This describes how you can Flash Sprint Note 3 to Reliance/Cricket/Metro
http://forum.xda-developers.com/showthread.php?t=2521369
Getting MSL is really easy using application SPCUtility.apk
http://tools.flashingtools.com/SPCUtility.apk
Now have anyone tried to take note 3 with GSM SIM unlock code outside of the US and use it with a foreign SIM?
Do you need to mod the build.prop? Why do you need to if you can access APN menu without it?
also someone above said: "but without spc cant possible to unlock it for GSM carrier."
How can you unlock GSM with SPC? just for international use of for US carriers as well?
You can acces the APN menu but you can't change anything without the build.prop change...
Sent from my SM-N900P using XDA Premium 4 mobile app
dutchman71 said:
You can acces the APN menu but you can't change anything without the build.prop change...
Sent from my SM-N900P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok, I see the "+" button goes to the "add APN" but everything is grayed out so it can only be used to switch between existing APNs but not adding a new one.
However I've just tried to use APN manager Pro and I was able to add an APN without modding the build.prop
https://play.google.com/store/apps/details?id=ale.android.apnmanagerwithanimation&hl=en
Also from my experience with traveling with modded Sprint's Note 2, it is easier to download xml file with huge database of APNs and inject it with APN manager pro. Some lists are here:
http://forum.xda-developers.com/showpost.php?p=35753093&postcount=3
I've attached my backup that can be restored with APN manager pro
This way when you insert a SIM card it automatically pics up a correct APN.
Plz make tools unlock gsm like s4 sprint . Waitinggggg
Sent from my SM-N900P using XDA Premium 4 mobile app