Related
EliteKernel 140628 & EliteKernel KitKat 150429
Turbo just got a new meaning.
For international HTC One X+ only. NOT for AT&T!
This experimental kernel is a tweaked version of HTC stock kernel for Android 4.2.x, therefore works with HTC Sense 5.
EliteKernel aims to provide:
- faster raw speed at lower frequencies
- decrease heat under heavy load
- optimize CPU, memory, I/O and native performance
- high stability
- more features
Be aware that I made this kernel primarily for myself, I may go to extremes to squeeze the last bit of performance out of my device. I guarantee no support whatsoever and any modifications you make to your device are solely your responsibility.
Usage:
1) download, extract the folder somewhere
2) connect your international One X+
3) open "oxp_flash_elitekernel.bat"
4) follow simple instructions
NOTE: The kernel has all necessary modules embedded, it should work with any ROM without any additional flashing steps. Also you don't need to reinstall/reflash when you change your ROM.
NOTE: On stock ROM - you need to install root and busybox!
If by any chance you don't get radio/wifi signal, you need to install latest superuser and busybox versions, then flash kernel again.
Do NOT use SetCPU and similar, they do not support tegra drivers and will break stuff so don't complain!
Please do not request features via PM or spam the thread repeatedly, I heard you the first time and either don't like the idea or am already working on it...
Features planned if possible:
- currently none
Many thanks to all the great devs of various parts and modules that made this possible.
.
XDA:DevDB Information
EliteKernel OXP, Kernel for the HTC One X+
Contributors
nik3r
Source Code: https://github.com/niker/elitekernel_oxp_kk
Kernel Special Features: Better battery life, no overheating, custom s2w.
Version Information
Status: Stable
Current Stable Version: 150429kk
Stable Release Date: 2015-04-29
Created 2015-05-10
Last Updated 2015-05-10
Downloads + Changelog
READ ME FIRST:
If you have problems, try to flash older versions chronologically before reporting it. Find the newest version where the problem did not yet occurr and describe it to me in this thread along with the ROM you are using. If you won't state the last working version I most likely cannot help you!
For problems with video players/convertors being choppy or slow, make sure you install the corresponding ARMv7 NEON codec package and enable hardware acceleration in options. The kernel will not let you abuse the CPU and kill your battery, you need the correct codec and uninstall all other codecs for the application.
Click to expand...
Click to collapse
Stable 4.4.x downloads: (cutting edge but may be unstable)
EliteKernel OXP KitKat 150429 - http://elite-force.eu/emoxp/oxp_elitekernel_kk_150429.zip
Click to expand...
Click to collapse
Old 4.2.x downloads: (NOT for AOSP / AOKP / CM10)
EliteKernel OXP 140628 - http://elite-force.eu/emoxp/oxp_elitekernel_140628.zip
Click to expand...
Click to collapse
Older versions:
Android 4.4.x below
http://elite-force.eu/emoxp/oxp_elitekernel_kk_150408.zip
http://elite-force.eu/emoxp/oxp_elitekernel_kk_141130.zip
http://elite-force.eu/emoxp/oxp_elitekernel_kk_140805.zip
http://elite-force.eu/emoxp/oxp_elitekernel_kk_140709.zip
Android 4.2.x below
http://elite-force.eu/emoxp/oxp_elitekernel_140615.zip
http://elite-force.eu/emoxp/oxp_elitekernel_140608_3.zip
http://elite-force.eu/emoxp/oxp_elitekernel_140317.zip
Android 4.1.x below
http://elite-force.eu/emoxp/oxp_elitekernel_130413.zip
Additional mods for this kernel:
Optional APKs:
Elite Power Saving
- toggles CPU power saving on/off
- forces full power when charging
- restores last settings after reboot
http://elite-force.eu/emoxp/EPSSwitch.apk
Easy Userinit by reaper90:
- allows you to set up various kernel settings just by editing a text file
- get it here: http://forum.xda-developers.com/showpost.php?p=49574056&postcount=1578
Tweaks for specific ROMs:
ARHD 8.0
- optimizes ARHD for smoothness vs battery life and a few extras
http://elite-force.eu/emoxp/ARHD8_TWEAKS_v1.zip
DataSwap mod:
- improves multitasking at the expense of raw performance (must read this before using)
http://elite-force.eu/emoxp/MOD_OXP_DataSwapV2_128MB.zip (flashable)
http://elite-force.eu/emoxp/MOD_OXP_DataSwapV2_192MB.zip (recommended size, flashable)
http://elite-force.eu/emoxp/MOD_OXP_DataSwapV2_256MB.zip (flashable)
http://elite-force.eu/emoxp/MOD_OXP_DataSwap_OFF.zip (flashable)
zRamSwap mod:
- improves multitasking at the expense of battery
http://elite-force.eu/emoxp/MOD_OXP_zRamSwap_3x50MB.zip (flashable)
- to remove, delete /data/local/zramswap.sh and reboot
Changelog:
150429kk:
-workaround for Google SystemUpdateService wakelocks
150408kk:
- fixed network latency/loss bugs
141130kk:
- exFat support by Phoenix09
141026kk:
- performance tuning
140805kk:
- security fixes by Lloir
140709kk:
- fixed DT2W support
- performance tweaks
140705kk:
- boot image cleanup to hybrid between Carbon and MoKee
- workaround for google service battery drain
- fixed installation of paid apps from Play Store
- compiled with Linaro toolchain for extra optimizations
- updated EPS Switch APK to restore last known state after boot instead of last saved state
140702kk:
- disabled KSM to eliminate battery drain
- fixed LED multiplier
- enabled some BT protocols
140628jb:
- fix for screen-off CPU cap getting stuck occasinally after playback gap during sleep mode
- tweaked CPU touch boosting
Click to expand...
Click to collapse
.
reserved post (because I can)
Troubleshooting:
Back to Stock Android 4.2.x - http://elite-force.eu/emoxp/oxp_elitekernel_140103_fallback.zip
Back to Stock Android 4.1.x - http://forum.xda-developers.com/showthread.php?t=2006668
Click to expand...
Click to collapse
Source code:
Android 4.2.x - https://github.com/niker/elitekernel_oxp_42
Android 4.1.x - https://github.com/niker/elitekernel_oxp
Click to expand...
Click to collapse
just flash via normal method (Recovery) right?
just wanted to clarify something, you said you tried to squeeze as much performance as possible, does that mean you OC'd or something?
Read the first post.
You can't flash kernels via recovery unless you have s-off. The download contains a one-click fastboot package.
Performance increase is not achieved by overclocking, quite the contrary this should produce better (lower) temperatures at identical frequency ranges. It's all software optimizations so far.
thanks mate
Thanks:good:
hi,
thx , oxp EliteKernel + insertcoin work's great,
Hi,
Flashed your Kernel, thanks very much :good:
Tried to get back into Recovery after though and couldn't.
Flashed the Stock kernel back again and could get back into recovery without issues again..
Looking forward to any future releases :highfive:
you're saying we can't go to recovery with this kernel?
Am I?
adb reboot recovery
Or hold power and vol down until you get to hboot, then recovery.
Worked for me every time and I am flashing like crazy.
Sent from my Desire Z powered by EliteMod.
Lags with video playing (MXPlayer and DicePlayer) on 1080p mp4 music clips. Energy saving was on|off. Return back to kernel from Maximus ROM and everything is OK - smooth playing without gaps.
I'll take a look, may be I/O or the fact that I disabled special CPU treatment for media to save battery.
Just downloaded a random 1080p video off youtube and tried a 3GB 720p movie and it works perfectly at just 51-1400MHz ondemand.
Maybe you are not using HW acceleration, other kernels may let you get away with that, this one actually has active battery saving features
I would suggest:
1) download the correct codec pack for your MX Player (ARM7 Neon)
2) start MXPlayer, go to settings-decoder and enable H/W+ decoder
If it doesn't work, upload some short sample clip that doesn't work for testing.
nik3r said:
Just downloaded a random 1080p video off youtube and tried a 3GB 720p movie and it works perfectly at just 51-1400MHz ondemand.
Maybe you are not using HW acceleration, other kernels may let you get away with that, this one actually has active battery saving features
I would suggest:
1) download the correct codec pack for your MX Player (ARM7 Neon)
2) start MXPlayer, go to settings-decoder and enable H/W+ decoder
If it doesn't work, upload some short sample clip that doesn't work for testing.
Click to expand...
Click to collapse
Flashed back your kernel, install codec pack for MX Player (ARM7 Neon), check that it has h/w acceleration. and lags again ((((
Link to clip
Works perfectly here, no dropped frames, crisp sound both battery and charging. I'm on Revolution ROM, 51-1400MHz ondemand.
Tested MX player, QuickPic, Rock Player HW, HTC gallery player.
Rock player CPU is not up for it but HW mode is flawless.
So it must be something specific to your ROM and video drivers/codecs, you can try to push video drivers from revolution but nandroid backup first.
nik3r said:
Works perfectly here, no dropped frames, crisp sound both battery and charging. I'm on Revolution ROM, 51-1400MHz ondemand.
Tested MX player, QuickPic, Rock Player HW, HTC gallery player.
Rock player CPU is not up for it but HW mode is flawless.
So it must be something specific to your ROM and video drivers/codecs, you can try to push video drivers from revolution but nandroid backup first.
Click to expand...
Click to collapse
I'm on the Ordroid, ОК, tomorrow will try ARHD
New version
EliteKernel 121126 is released
Recommend turning off your SetCPU profiles and after boot settings, the core frequencies are now asynchronous unless you set them manually.
Changes:
- added s2w support
- changed default frequencies for better performance/battery(heat) ratio (1400-1600-1600-1400/204-51-51-102 since cores activate in order 0-3-2-1)
Enjoy
nik3r said:
EliteKernel 121126 is released
Recommend turning off your SetCPU profiles and after boot settings, the core frequencies are now asynchronous unless you set them manually.
Changes:
- added s2w support
- changed default frequencies for better performance/battery(heat) ratio (1400-1600-1600-1400/204-51-51-102 since cores activate in order 0-3-2-1)
Enjoy
Click to expand...
Click to collapse
Great work ....keep up ...hopefully call recorder will be ported into next version .....just hopefully. ... thanks in advanced
nik3r said:
EliteKernel 121126 is released
Recommend turning off your SetCPU profiles and after boot settings, the core frequencies are now asynchronous unless you set them manually.
Changes:
- added s2w support
- changed default frequencies for better performance/battery(heat) ratio (1400-1600-1600-1400/204-51-51-102 since cores activate in order 0-3-2-1)
Enjoy
Click to expand...
Click to collapse
I installed, but the version has not changed
Discussion thread for the Samsung Galaxy Player 3.6 (YP-GS1) running CyanogenMod 11
Also known as: Samsung Galaxy S WiFi 3.6
Development thread: http://forum.xda-developers.com/showthread.php?t=2657738
Hello XDA,
this the official discussion thread for users of the Samsung Galaxy Player 3.6 running CyanogenMod 11.
This thread is for holding the development thread clean.
What belongs here
Questions (& Answers)
Tips
Bug reporting
Discussing and talking
What not belongs here
Posts like: "YEAAAAAAH" or "Pls do tis for me and tis for mee thxk"
Asking for ETAs (Estimated Time of Arrival), like "When does the next update comes out?"
Rules
Don't flame anybody!
Don't spam!
Stay on topic!
Happy asking, answering and posting!
For the best CPU performance set the min. CPU frequency to 600 MHz in Settings/Performance/Proccessor, and activate 'Set on boot'
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
@Androthan is working on CM11 for the 4.2. Compiling just the kernel isn't enough, you'll need a device tree of the 4.2 made for CM11 and build a ROM with that.
Ca110 said:
Will the bluethoot pan sharing connection work?
I used my omnia i900 with some other devices (like galaxy s3) and it's work but with gingerbread or ICS devices didn't work
Inviato dal mio YP-GS1 con Tapatalk 2
Click to expand...
Click to collapse
Actually bluetooth isn't working, so I can't tell you.
julese50 said:
If we've the 4.2 Player, will we have to compile the kernel ourselves? Because the kernel does not compile on my computer.
Click to expand...
Click to collapse
The kernel source for the 4.2 player, from my github account, are still under constructions and won't work.
And, of course, you don't need to compile it yourself.
I'll start with porting to 4.2 when the build for the 3.6 is a lot more stable.
BTW, the player 4.2 is off-topic here
Quentinga said:
Can GP 3.6 support 1200 Mhz overclock ? I read the motorola defy can be overclock to 1300 Mhz.
EDIT :
With conservative governor (1100-600 Mhz), I get a better antutu score than ondemand governor : 4807 points.
Click to expand...
Click to collapse
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Androthan said:
I'll try to get it to 1.2 GHz (I already know what to do). But I'll to do when CM11 is a lot more stable.
1.3 GHz seems to be a bad idea, it could burn out the cpu and drain the battery
Sent from my XT1032 using XDA Free mobile app
Click to expand...
Click to collapse
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Quentinga said:
No problem, but I think it's better to add a new frequency entry, not change the 1000 Hz to 1100 or 1200 for a better cpu throttling.
Like this {300, 600, 800, 1000, 1100, 1200}
EDIT : can we have in the future (priority for wifi and video playback) add more governor ? (interactive, smartass, ...)
Click to expand...
Click to collapse
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Androthan said:
It's very difficult to add a new frequency entry but I'll try my best.
Yes, I'll add some governors later, when everything is more stable.
Click to expand...
Click to collapse
I speak a lot, but I don't now how it's difficult because It's too hard for me =P
The bootanimation is kinda big for our screen. Maybe we can resize it?
Also, the home button in US version doesn't work.
Android 4.4.3
***Android 4.4.3 is out***
Google released the Android update 4.4.3. This update contains mostly bugfixes and improvements (Read more here: http://liliputing.com/2014/06/whats-new-android-4-4-3-kitkat.html) Don't expect any new features with this update. CyanogenMod is currently merging Android 4.4.3 into CyanogenMod 11, so we have to be patient. As soon as this is done, I'll update my local source code.
Expect Alpha 3 in the next 4 to 5 days.
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
I think CWM 5 is out for stock gingerbread rom one year ago : http://forum.xda-developers.com/showthread.php?t=2198234
reppad said:
Hello,
Thanks for the work to port Kitkat on the Galaxy Player.
Until a more stable version, is it possible to install ClockworkMod 6 and keep the stock rom (2.3.6) ?
This will permit to root the device by flashing superSu from ClockworkMod ?
Click to expand...
Click to collapse
Sorry but this isn't possible and will end in a soft brick.
Thanks @Quentinga & @Androthan, you saved me from making a stupidity
I keep an eye on this rom and will test soon.
Does music/video playback work on Alpha 2 ? (not able to use the sdcard space and Apollo crash everytime)
Phone feature is enable like in CM 7.2, or it's disable? (It is)
EDIT: (07/06/2014)
1) If the player is plugged in and switch it off, it will restart.
If, however, is not connected, then turns off simply.
2) In alpha2 there isn't the performance menu in option.
Any news with wifi module ? the awesome @zaclimon can't help you ?
I've flashed CM12.1 and M5 kernel , I also use EK kernel manager to tweak voltages and other parameters but it seems no core is going offline when idle , they just stay on the lowest frequency but no one goes offline .
Somehow (I have no idea how) I managed once to make them go offline but after a reboot didn't work anymore .
My CPU governor is Interactive and I didn't touch governor settings .
Which hotplug are you using?
Which cores stay online?
What are the tweaks you make?
Do you have any applications that might be running in the background?
It is a fresh installation, or a dirty flash?
D395267 said:
Which hotplug are you using?
Which cores stay online?
What are the tweaks you make?
Do you have any applications that might be running in the background?
It is a fresh installation, or a dirty flash?
Click to expand...
Click to collapse
sorry for not giving more details , so here you go :
rom : CM12.1 nightly
kernel : M5 11.1 permissive L
hotplug ? no idea ... default maybe ?
tweaks : no tweaks , just stock kernel M5 settings
apps in background : just vital processes , I always clear task manager and still not installed anything just EK kernel manager
fresh instalation : yes , wiped everything before installing CM12.1
Later edit : I installed other kernel tweaker (Kernel toolkit) and it allows me to change hotplug ... I changed from mpdecision to intelliplug and they seems to go offline now , what's the difference between mpdecision and intelliplug ?
Dragoss91 said:
sorry for not giving more details , so here you go :
rom : CM12.1 nightly
kernel : M5 11.1 permissive L
hotplug ? no idea ... default maybe ?
tweaks : no tweaks , just stock kernel M5 settings
apps in background : just vital processes , I always clear task manager and still not installed anything just EK kernel manager
fresh instalation : yes , wiped everything before installing CM12.1
Later edit : I installed other kernel tweaker (Kernel toolkit) and it allows me to change hotplug ... I changed from mpdecision to intelliplug and they seems to go offline now , what's the difference between mpdecision and intelliplug ?
Click to expand...
Click to collapse
MPDecision is the official Qualcomm hotplug, whilst IntelliPlug is one of the few custom hotplugs made to replace the Qualcomm one. Read this: http://www.androidmodguide.blogspot.co.za/p/blog-page.html (bookmark it too, it really will come in handy)
I just checked how my device behaves with MPDecision enabled, and the same thing happens. All cores become online. Using any of the other hotplug fixes this :good:
Also, check out Kernel Adiutor. I find it better than Kernel Toolkit
D395267 said:
MPDecision is the official Qualcomm hotplug, whilst IntelliPlug is one of the few custom hotplugs made to replace the Qualcomm one. Read this: http://www.androidmodguide.blogspot.co.za/p/blog-page.html (bookmark it too, it really will come in handy)
I just checked how my device behaves with MPDecision enabled, and the same thing happens. All cores become online. Using any of the other hotplug fixes this :good:
Also, check out Kernel Adiutor. I find it better than Kernel Toolkit
Click to expand...
Click to collapse
Thanks for the blog link . And yeah , I replaced Kernel Toolkit with Kernel auditor only for changing the hotplug and apply on boot . I presonally prefer EK kernel manager , is very smooth interface and easy to use , I also don't tweak too much variables , I saw auditor has a pile of variables available to tweak .
I ended up setting MSM-MPdecision to apply on boot and I'm fine now .
The battery life on Z2 is quite impressive but now with undervolt + msm-mpdecision it will go even more impressive .
Thanks again !
Hello A6 users! I present you my first custom kernel for this phone. It has some pretty cool features. They are:
● Prerooted with Magisk 18.1
● SELinux Permissive
● Deleted all kinds of security measures like DM-Verity, RMM, Knox, TIMA, defex
● 5V/2A charging support (needs charger and cable that can supply it)
● CPU overclock to 1.7GHz (original 1.6)
● GPU overclock to 1.3GHz (original 1.0)
● Fsync on/off support
● CRC on/off support
● SafetyNet patched
● Overclock screen refresh rate to 64Hz
● CPU and GPU undervolt for optimal battery life and thermals
● Added tons of custom CPU governors and I/O schedulers
● Boeffla Wakelock Blocker
● Ultra Kernel Samepage Merging
● FRANDOM support
● Reduced time to sleep
● Wireguard support
● ARCH power support
● Prop tweaks including 1080p youtube playback support
● Undervolted display, touchpanel, vibrator motor and sensors for better battery life
● Disabled Exynos Input Booster
● Disabled Exynos GPU DVFS
● Spectrum proffiles support with optimized presets (can be found in the integrated OxygenControl app)
● Built with Linaro 7.4.1 toolchain
● Kernel base J600GDXU3ARL1
● Ramdisk base J600GUBS3ASA7 (January patch)
Supported variants:
SM-A600FN (Europe) - Working
SM-A600F (Africa/Asia) - Working
SM-A600G (Asia) - Working
SM-A600GN (Latin America) - Probably working (needs testing)
SM-A600N (Korea) - Probably working (needs testing)
SM-A600P (USA Sprint) - NOT supported - Exynos 7884 CPU
SM-A600T (USA TMobile) - NOT supported - Exynos 7884 CPU
SM-A600T1 (USA TMobile) - NOT supported - Exynos 7884 CPU
SM-A600A (USA AT&T)- NOT supported - Exynos 7884 CPU
SM-A600AZ (USA AT&T) - NOT supported - Exynos 7884 CPU
SM-A600U (USA Unlocked) - NOT supported - Exynos 7884 CPU (not confirmed)
SM-A605 (Any A6+ variants) - NOT supported - Snapdragon 450 CPU
Download links:
Google Drive Folder
Installation instructions
1. You need a custom recovery installed like TWRP, a link to can be found here. Follow the instructions carefully and strictly to install it.
2. Boot into TWRP then go to Install and navigate to the kernel zip file. Click on it and swipe to install. Everything will go automatically.
3. Once it finishes you are basically done, reboot your phone and enjoy.
And finally, here are some screenshots from my fellow testers:
Credits:
@renoxtv obviously
@ananjaser1211 and @corsicanu for many commits and help with troubleshooting
@BlackMesa123 for RMM patches
@topjohnwu for Magisk
@DarkLord1731 for making oxygen control app and Spectrum proffiles for 7870
And the guys who went trough my torture of testing everything
XDA:DevDB Information
[KERNEL][22.02.2019]Phoenix Kernel V3.6 for the Galaxy A6 (2018), Kernel for the Samsung Galaxy A6
Contributors
renoxtv
Source Code: https://github.com/renoxtv/android_kernel_samsung_a6lte_exynos7870
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V3.6
Stable Release Date: 2019-02-22
Created 2018-08-22
Last Updated 2019-02-22
Q&AQ: Why is my OEM Unlock turned off?
A: Don't worry about it. Some weird stuff happening there, it's still on tho.
Q: Will you add AOD?
A: No. Not because I don't want, because it's impossible. Trust me, me and other devs tried alot.
Q: Will you add X feature?
A: If it's possible to add and if it's not stupid.
Join here to get updates about my kernelI have made a Telegram channel for updates on my kernel, maybe betas too.
Link: https://t.me/PhoenixKernelA6J6
For reporting bugsSo if there occurs a bug in the kernel, here are what you should do to help me fix that. Remember I work without a device so I can't replicate bugs myself.
1. Write your phone's model number
2. Write your phone's CSC code
3. Write your security patch level
4. Do you have any magisk modules installed?
5. Explain the issue with details
6. Replicate the issue, then boot straight to TWRP. From there go to Advanced > File Manager and navigate to /proc. Then find a file named last_kmsg, copy that to your internal storage or SDcard and upload it somewhere then send it in my XDA PM or Telegram PM at username MITKO7411XD
ggwp
75k antutu wen
Working on A600G.
Working perfectly with A600G latest update.
For faster charging, I don't see any improvement. Still stuck at 1.500mA like stock kernel. Testing using Samsung Adaptive Charger and Asus Zenfone 2 fast charger.
hasel17 said:
Working perfectly with A600G latest update.
For faster charging, I don't see any improvement. Still stuck at 1.500mA like stock kernel. Testing using Samsung Adaptive Charger and Asus Zenfone 2 fast charger.
Click to expand...
Click to collapse
Thank you for testing! I could try to add Adaptive fast charging but i don't wanna risk explosion :laugh: Plus i don't have this phone. I mainly did the faster charging for people with stock A6 chargers.
rekai said:
75k antutu wen
Click to expand...
Click to collapse
Nevur XD
renoxtv said:
Thank you for testing! I could try to add Adaptive fast charging but i don't wanna risk explosion :laugh: Plus i don't have this phone. I mainly did the faster charging for people with stock A6 chargers.
Nevur XD
Click to expand...
Click to collapse
thank you. hopefully for A6+ series also
my opinion fast charging not really necessary, for A6+ charging already fast and i prefer to choose default speed charging and long lasting battery than modified/faster charging but degrade battery life span.
so, for this "fast" charging feature thing, you better make 2 version of kernel... (default and modified charging speed)
an-_-dro said:
thank you. hopefully for A6+ series also
my opinion fast charging not really necessary, for A6+ charging already fast and i prefer to choose default speed charging and long lasting battery than modified/faster charging but degrade battery life span.
so, for this "fast" charging feature thing, you better make 2 version of kernel... (default and modified charging speed)
Click to expand...
Click to collapse
Sadly, I will not support A6+ because it's a completely different phone with a Snapdragon 450 chip. I work on Exynos7870 phones, specifically this A6. About the fast charging, its up to the user how well they want to treat their battery. With faster charging or not, don't think the difference will be that big since the limitation is the charger. For example, I used to always charge my phone from my PC because it has low current and limit my battery to charge only to 80%. Now i only do the 80% thing but still. My J5 17 is 9 months old and it has only lost 200mAh of its battery capacity.
Phoenix Kernel V1.5 released. Changelog, Download link and a new antutu screenshot is in the 1st post
Hello, I have installed the kernel v1.5 on my Samsung sm-a600g. But the GPU is underclocked to 728 mh. But according to your post it should be overclocked to 1146 mh.
afzal0619 said:
Hello, I have installed the kernel v1.5 on my Samsung sm-a600g. But the GPU is underclocked to 728 mh. But according to your post it should be overclocked to 1146 mh.
Click to expand...
Click to collapse
According to my post, the 1146Mhz overclock is optional.
Although I think the default clock is 1001 so i still have to fix it
Hi Renoxtv, I really appreciate your work u have done for the improvement of Samsung a6. But I request you to not only fix the GPU clock but also I think It would be great to have the GPU overclocked to 1146 mhz. Bcoz it has only one core and for gaming performance it MUST be overclocked to 1146 mhz. Hoping the best from you.
afzal0619 said:
Hi Renoxtv, I really appreciate your work u have done for the improvement of Samsung a6. But I request you to not only fix the GPU clock but also I think It would be great to have the GPU overclocked to 1146 mhz. Bcoz it has only one core and for gaming performance it MUST be overclocked to 1146 mhz. Hoping the best from you.
Click to expand...
Click to collapse
GPU OC is optional and will remain optional, I don't want complains about battery life. You can overclock your GPU manually with this app: https://drive.google.com/file/d/1tnWJvqhvj3s41V1LMRdrtyGYCsLEwNbV/view?usp=sharing (thanks for @DarkLord1731 for app)
Go to GPU tab, select min and max GPU frequency to 1146, set Mali Power policy to always_on and set GPU governor to Booster. Revert settings when you are done with your gaming, otherwise the GPU will always run at 1146MHz even when you're not playing and it will waste your battery. Anyway, A6 is not a gaming phone in any means and this kernel won't improve it a lot. I know the GPU OC is a little complicated but for now this is what we are stuck with
Hi Renoxtv, thank you for replying so fast. I downloaded the kernel control app u provided in ur post. Everything gone as u told. Thanks to @DarkLord1731 too for his amazing kernel app. Now I can overclock the GPU as per my requirements. U are right that Samsung A6 is not the handset for gamers. But due to ur custom kernel the little overclocking in CPU and GPU will surely improve the gaming performance a bit. By the way keep up the good work and best of luck to u. :good:
afzal0619 said:
Hello, I have installed the kernel v1.5 on my Samsung sm-a600g. But the GPU is underclocked to 728 mh. But according to your post it should be overclocked to 1146 mh.
Click to expand...
Click to collapse
manual overclock from oxygen tools
Hello i have never flashed a custom kernel, could you give us the steps to follow please ?
chegue4 said:
Hello i have never flashed a custom kernel, could you give us the steps to follow please ?
Click to expand...
Click to collapse
If you already rooted your A6 before, installing the kernel is easy. You just download the latest kernel and flash it with TWRP. If you haven't rooted your phone, you must install custom TWRP recovery menu, go here to go to the TWRP thread, there are detailed instructions on how to install TWRP there, follow them strictly. If you successfully installed TWRP, you can then flash this kernel like you would install the rmm bypass zip and no-verity zip.
For live help I suggest you join this telegram group:
https://t.me/joinchat/EIBw1kpS4JYAdol689slGw
;-;
How do I install this? It looks really neat, but i don't want to mess up with custom recoveries. 谢谢
mr__robot said:
How do I install this? It looks really neat, but i don't want to mess up with custom recoveries. 谢谢
Click to expand...
Click to collapse
If you don't want to mess with recoveries, then you wont get this kernel too XD
In the post above yours i kinda wrote how to install it
help me
how to root your A600G
MY PROBLEM RMM PRENORMAL ?!
thanks
So first off all this is not my work previously I updated my device GPU driver's version from v408 to v415 by using magisk module but now from this thread
[DRIVER] [10.0+] Adreno 600 Series OpenGL & Vulkan Drivers [[email protected]][1.1.128]
*** Disclaimer I am not responsible for any damage you made to your device You have been warned What Adreno Graphics Drivers do? Fully release the potential of GPU to continuously improve gaming experience. The main functions are optimize the...
forum.xda-developers.com
I got working updated GPU openGL @v464 and vulkan grafix driver's updated to v 1.1.128(previous vs v1.1.87)
Download:
GPU drivers folder :
Adreno Team Graphics Drivers - Google Drive
Device Info HW app :
Device Info HW - Apps on Google Play
Hardware and software information app for Android devices.
play.google.com
Open GL extension app :
GLView Extensions Viewer - Apps on Google Play
Displays the information and the extensions for OpenGLES and Vulkan
play.google.com
So our one plus 6 has Snapdragon 845 SoC which has ADRENO 630 GPU , inside download folder you will see adreno 600 series folder in that you get two another folders ,
AIO(ALL IN ONE) folder which includes zip having both openGL and vulkan driver's this zip is recommended but if you want to flash either openGL or vulkan seperately another folder is there having seperate driver's zip.
While flashing driver's seperately you need to flash OpenGL zip first then flash vulkan driver's.
But if you have issues with driver's like bootloop you can use openGL lite version along with vulkan driver's.
So inside AIO zip yo have to select our SoC version i.e SD845 in that you will see folder named as testing only except that folder choose only stable build folder here our stable build folder is v464 in that folder again you get files named with M(magisk version) and R(recovery version) so magisk version is recommended because it's systemless and if you got issue you can directly remove module from magisk app.
Recovery version file:
If you choose theses file you have to flash them via recovery and if you got any issue you can remove by using remover zip or cache cleaner zip available in add on folder.
So I after flashing you need to check your updated GPU driver's version inside opneGL extension app.
So finally our GPU updated to version v464 dated 13/03/2020
So updating GPU is gimmick or truth:
I used geekbench test for updated vulkan grafix driver's and I got 1973 and previously on old version it was 1941 performance boost is negligible but it's better to be updated than old driver's
Here is small video explaining all
So can I go directly from v408 to v464?
All improvements for the old OP6 are very welcomed.
Edit: I can
RodiNet7601 said:
So can I go directly from v408 to v464?
All improvements for the old OP6 are very welcomed.
Edit: I can
Click to expand...
Click to collapse
Yes cheers
If i decide to try this the procedure is just to boot to recovery and flash.At the moment i'm using unofficial Lineage 18.1 with Twrp,device OP6.P.S: a few days ago i tried with lineage recovery and sideloading.it didn't work,just stuck on infinite lineage boot logo.Thanks
darksx said:
If i decide to try this the procedure is just to boot to recovery and flash.At the moment i'm using unofficial Lineage 18.1 with Twrp,device OP6.P.S: a few days ago i tried with lineage recovery and sideloading.it didn't work,just stuck on infinite lineage boot logo.Thanks
Click to expand...
Click to collapse
This is a Magisk module, not a recovery flash
RodiNet7601 said:
This is a Magisk module, not a recovery flash
Click to expand...
Click to collapse
Obviously there are two files as in OP,recovery and magisk version.
THREAD CLOSED as a subject matter related thread already exists:
[Magisk] Adreno 630 GPU Updated Drivers
Hello everyone I was wondering if our phone gpu drivers could get any update and actually....YES! I found a great Magisk module which can help us in doing it easily The Module name is: Adreno 630 GPU Driver Please before installing it...
forum.xda-developers.com
XDA Forum Rules (excerpt):
...
5. Create a thread topic or post a message only once, this includes external links & streaming media.
As a large forum, we don't need unnecessary clutter. You're free to edit your message as you like, so if you do not receive an answer, revisit your message and see if you can describe your problem better. Not everyone is online at the same time so it might take a while before you receive an answer.
You can bump your unanswered question once every 24 hours
Duplicate threads and posts will be removed
Always post in an existing thread if a topic already exists, before creating a new thread.
Use our search function to find the best forum for your device.
Links to an external source are only allowed if relevant to the topic in hand. A description must be included, no copy & pasting from the original source.
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
...
Click to expand...
Click to collapse