I need your help, i am trying to full stock my i9300 4.3.1 and when i try with odin , pit file error, some help, please?
You can try a recovery flash:
http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6&nocache=1&z=2327873667236417
But most probably you'll need a new motherboard.
you will ended on bricked phone if you try to play with pit file..
i have a samsung galaxy S3 Korean M440S and it can't be flashed by odin
it keeps saying "NAND Write Start! Fail"
i searched that if you have a "NAND Write Start! Fail", you have to flash the pit file
but i've been searched it anywhere and no result
i don't know what i must do now, if you have any solution, plz help me
Hello,
i tryied to flash CM11 to my i9300 using one of the manual here but i ended up with phone going on boot loop when started(Shows only Samsung i9300 black/white logo in 3seconds loop). I only have an access to download mode
It says:
Product name: GT-i9300
Custom Binary download: Yes
Current Binary: Samsung Official
System Status: Custom
When i try to get the recovery mode installed again the Odin say
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> SingleDownload.
<ID:0/028> boot.img
<ID:0/028> NAND Write Start!!
And thats all. I supose i can connect through the USB while the odin shows the USB COM port and blue color.
Is my phone bricked or is there any way how to save it? Thank you for your advice
honzicek69 said:
Hello,
i tryied to flash CM11 to my i9300 using one of the manual here but i ended up with phone going on boot loop when started(Shows only Samsung i9300 black/white logo in 3seconds loop). I only have an access to download mode
It says:
Product name: GT-i9300
Custom Binary download: Yes
Current Binary: Samsung Official
System Status: Custom
When i try to get the recovery mode installed again the Odin say
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Get PIT for mapping..
<ID:0/028> Firmware update start..
<ID:0/028> SingleDownload.
<ID:0/028> boot.img
<ID:0/028> NAND Write Start!!
And thats all. I supose i can connect through the USB while the odin shows the USB COM port and blue color.
Is my phone bricked or is there any way how to save it? Thank you for your advice
Click to expand...
Click to collapse
If I'm not mistaken boot.img is the bootloader, not the recovery. Are you sure you can't get into recovery using the 3-button-combo? If not I would try flashing this recovery via ODIN. And then try to reboot into it using the combo. Then flash CM zip from there again.
Hi, im sure i cant get to recovery using 3 button combo. That gives me only the loop of "Samsung SIII" logo. The 3buttons combo work only for download mode.
Thats what i wrote, when im trying to flash the recovery via ODIN it gets stucked on the on the message <ID:0/028> NAND Write Start!! and nothing else happens. I tryed the 3.07 and 3.09 version of ODIN.
honzicek69 said:
Hi, im sure i cant get to recovery using 3 button combo. That gives me only the loop of "Samsung SIII" logo. The 3buttons combo work only for download mode.
Thats what i wrote, when im trying to flash the recovery via ODIN it gets stucked on the on the message <ID:0/028> NAND Write Start!! and nothing else happens. I tryed the 3.07 and 3.09 version of ODIN.
Click to expand...
Click to collapse
Ah, I'm sorry I misunderstood. I thought that was just a snippet of the log... Try flashing the recovery I provided and see if it flashes. If not, maybe you can flash stock firmware with pit file (new partition table). If nothing flashes, I have no further ideas.
Thanks, but ive already tryed to flash several recovery with the same results (got stucked on NAND write in ODIN), I downloaded stock rom but the package was without pit and other kinds of files (got stucked too on NAND write in ODIN). Its a ROM for TMZ (T-mobile Czech). Do you know where i can get the "full" package. Do i need to flash the pit and other files together with ROM?
You're seriously pottering a brick. The 'full package' contents 3 files, which you've to place in the right Odin-windows +repartition-check. These files are unofficial. Google for files and instruction.
rp158 said:
You're seriously pottering a brick. The 'full package' contents 3 files, which you've to place in the right Odin-windows +repartition-check. These files are unofficial. Google for files and instruction.
Click to expand...
Click to collapse
I could be mistaken but I believe the 3-part-roms (csc / pda / phone) is the "old style" how roms where put out by sammy. You would have to search but I would think you can also use the version you get from sammobile nowadays (one zip) and additionally just use the gt-i9300 pit file found somewhere here in the forums.
@Hawaiihemd: be shure, you're wrong.
honzicek69 said:
Thanks, but ive already tryed to flash several recovery with the same results (got stucked on NAND write in ODIN), I downloaded stock rom but the package was without pit and other kinds of files (got stucked too on NAND write in ODIN). Its a ROM for TMZ (T-mobile Czech). Do you know where i can get the "full" package. Do i need to flash the pit and other files together with ROM?
Click to expand...
Click to collapse
Try this >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << the pit file is in the 4.1.2 download and can be used on both versions.(Also try the 1.85 version of Odin) >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 <<
rp158 said:
@Hawaiihemd: be shure, you're wrong.
Click to expand...
Click to collapse
@rp158 Well, I think I only made a small error in my assumption.
Here are the details on the sammobile download. It seems to hold everything a "3-part-version" holds. I downloaded the file and a look at the .tar file inside the single .zip seems to confirm that.
This post suggests that flashing the .tar with the pit file should work.
I don't know because I haven't tried myself, maybe you have. Or I'm missing a piece of the puzzle. If so, maybe you could point me to it!?
@Hawaiihemd: If I look into the unzipped tar.md5-firmware, there are image-files. One for each partition. If I look into a 3part-zip-file, there are 3 tar.md5-files for each Odin-input-window. I tried only this soft method. The way, described in your cited post, I would only try as a last exit. The whole Odin-firmware-flashing is a black-box: noone knows, why&when during a normal flash a factory-reset is triggered or during repartition efs-data are restored. So, where the software finds the necessary repartition-data in the usual 1part-zip, is also unknown. Sorry, if I hurt you.
rp158 said:
@Hawaiihemd: If I look into the unzipped tar.md5-firmware, there are image-files. One for each partition. If I look into a 3part-zip-file, there are 3 tar.md5-files for each Odin-input-window. I tried only this soft method. The way, described in your cited post, I would only try as a last exit. The whole Odin-firmware-flashing is a black-box: noone knows, why&when during a normal flash a factory-reset is triggered or during repartition efs-data are restored. So, where the software finds the necessary repartition-data in the usual 1part-zip, is also unknown. Sorry, if I hurt you.
Click to expand...
Click to collapse
You didn't, don't worry. I was a little stumped maybe, but only because your answer was so terminal. Actually I only wanted to start a discussion about this, because you seemed to know more about said process than me and I always try to gain knowledge here to better help solving problems. I haven't been in this forum for long or into android for that matter...
That said, I have done the "3-files" version of this process with a .pit file thrice already on different gt-i9000s. Always worked flawlessly.
Looking at the ones in the post @tallman43 suggested, I found the contents of those 3 .tar.md5 files in summary(!) similar to the ones in the 1 .zip from sammobile. That's why I thought it could work in the first place.
One thing I'm sure of is that in both cases the repartition info is in the .pit file. If you choose none, the MMC should not be repartioned. If partitions are reformatted... that's another deal.
Concerning the efs partition, to/from where that info is stored/restored during repartitioning of the MMC... that's a very interesting question!
tallman43 said:
Try this >> http://forum.xda-developers.com/showpost.php?p=30087735&postcount=6 << the pit file is in the 4.1.2 download and can be used on both versions.(Also try the 1.85 version of Odin) >> http://forum.xda-developers.com/gal...08-2013-odin-3-09-odin-1-85-versions-t2189539 <<
Click to expand...
Click to collapse
Thank you very much for this hint. It worked well. I used the all files from KOR zip and 1.85 ODIN. Now i have the Korean version but at least i have something to start with and phone which works now.
hi i have a Galaxy Ace 4 SM-G357FZ , after an update it is bricked, after i have tried to flash the original firmware with odin but it reply to me "There is no PIT partition." Someone have an idea to how i can resolve?
I have tried to search a pit file to flash with odin ma i have not found it .
hI i am having the error in ODIN: getting pit odin for mapping when I try to install a custom recovery in galaxy grand quattro and also when I try to reinstall the rom stock. Already I tried to use the pit file here forum but did not work.
Any soluiton? My phone works normally.
THANKS! Sorry for my english, i don't speak english.