[Q][SOLVED] Sony Xperia P Bootloop - Sony Xperia P, U, Sola, Go

Hello guys. I read many of your threads and tutorials but I am stucked and desperated.
I have a Sony Xperia P 6.2.a.0.400 version.
First of all I unlocked bootloader with the sony official guide.
Then I installed CMW and rooted my phone or so I think.
Last I put the latest Cyanogenmod for kit kat and flashed the zip.
After that I rebooted but the phone stucked on CyanognMod 10.2 animation (a circle spinning around)
Some times it appears that the systemui has stopped or mosto of the times it's just spinning around.
What can I do? I can access my phone anymore. Is there any solution?

flash
flash the original firmware file

slogger001 said:
flash the original firmware file
Click to expand...
Click to collapse
Where can I find it please? Cause everything I downloaded it was a survey and I can't find something good for 6.2.a.0.400 version.
Also where can I find a good tutorial about flashing? Is this a good one http://forum.xda-developers.com/showthread.php?t=1849170?
Thanks for the reply

Nick64gr said:
Where can I find it please? Cause everything I downloaded it was a survey and I can't find something good for 6.2.a.0.400 version.
Also where can I find a good tutorial about flashing? Is this a good one http://forum.xda-developers.com/showthread.php?t=1849170?
Thanks for the reply
Click to expand...
Click to collapse
Download Flashtool and install it, then download an ftf firmware (just search on xda). Find the Flashtool installation directory, for me it's C:/Flashtool, go in to firmwares (C:/Flashtool/firmwares) and put your ftf file there. Now open Flashtool, click on the flash button then choose flashmode and you should see your firmware file there. click on it then on the right hand side in the wipe box untick everything, then in the exclude box tick everything apart from SYSTEM. Click on flash and wait until it tells you to connect your device, then turn off your phone, wait 5 seconds, hold the volume up button and connect your phone to your PC. That should reflash the system partition on to your phone :victory:

[Q][Solved] Sony Xperia P Bootloop
OK. I did everything you said. But it gives me an error on flashtool:
09/027/2014 16:27:10 - ERROR -
09/027/2014 16:27:10 - ERROR - Error flashing. Aborted
09/027/2014 16:27:11 - ERROR - Drivers need to be installed for connected device.
09/027/2014 16:27:11 - ERROR - You can find them in the drivers folder of Flashtool.
[EDIT]: I flashed in ofw. But now it stucked in JB bootloop... I am so unlucky
[EDIT2]: OK. Done it. Thanks for help!
Now?
Thanks for the reply

Related

Trying to unlock bootloader on x10 mini pro

Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
LostHH said:
Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
Click to expand...
Click to collapse
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
SmG67 said:
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
Click to expand...
Click to collapse
I can't seem to enter flash mode :/
I hold the back button and connect the phone to the pc. Initially it installed some flash driver onto the pc and then booted up as normal.
Now it just boots up as normal no matter how long I hold the back button (throughout the whole process so far)
Does having xrecovery have anything to do with this?
Thanks
Edit - my antivirus was quarantining s1tool.exe! derp.
Edit 2 - Success! Thanks chaps. You're all pretty cool in my books
please i need help to enable network on my phone
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
Did you relock the bootloader before you restored stock rom?
please help
SmG67 said:
Did you relock the bootloader before you restored stock rom?
Click to expand...
Click to collapse
yes i relocked the bootloader before i restored to the SE original stock rom...
I still cant get access to the sim network but can see the sim tool kits..pls help me
solotion
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
I have had problem like yours on x10i .
but about solotion:
just flash e15i nAa kernel file to your phone by flash tool before this phone must be rooted.100% worked for me .sorry about my english.:laugh:
Help
Hi,
i don't know if this comes under this section also,
i lost the post that i was using to update my x10 mini pro from 2.1 to 2.3 after my pc freezed and restarted.
So my SE finished the update but it's stuck on the Sony Ericsson text on boot up in faint brightness.
I used flshtool 0.9.0.0
rooted the phone and installed busy box.
restarted the phone with the blue screen menu a selected the NAa kernel from SD to load.
After that rebooted the phone then sony ericsson text came very bright then it starts to faint to minimum and nothing else happens.
If i connect flashtool i will get the following:
02/046/2012 14:46:55 - INFO - Device disconnected
02/047/2012 14:47:16 - INFO - Device connected with USB debugging off
02/047/2012 14:47:16 - INFO - For 2011 devices line, be sure you are not in MTP mode
02/047/2012 14:47:24 - INFO - Device disconnected
02/047/2012 14:47:26 - INFO - Device connected with USB debugging on
02/047/2012 14:47:27 - INFO - Connected device : U20
02/047/2012 14:47:27 - INFO - Installed version of busybox : BusyBox v1.19.4-cm7 bionic (2012-02-04 22:27 +0100) multi-call binary.
02/047/2012 14:47:27 - INFO - Android version : 2.3.7 / kernel version : 2.6.29
i even tried SEUS but nothing happens it would ask to reboot in flashmode and the device will enter flashmode and nothing happens.
also tried to restart with the blue screen menu by pressing power and the back button multiple times and back with volume + and - nothing occurs.
I downloaded ver 0.9.1.0
and tried the force root and here is the log:
Any solution ?
Thanks in advance.
nabilaj said:
Hi,
i don't know if this comes under this section also,
...
Any solution ?
Thanks in advance.
Click to expand...
Click to collapse
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
stuck on text sony erricson nothing else can be done
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
SmG67 said:
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
Click to expand...
Click to collapse
nabilaj said:
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
Click to expand...
Click to collapse
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
stuck on text sony erricson nothing else can be done
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
SmG67 said:
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
Click to expand...
Click to collapse
nabilaj said:
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
Click to expand...
Click to collapse
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
stuck on text sony erricson nothing else can be done
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
SmG67 said:
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
Click to expand...
Click to collapse
nabilaj said:
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
Click to expand...
Click to collapse
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
stuck on text sony erricson nothing else can be done
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
SmG67 said:
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
Click to expand...
Click to collapse
nabilaj said:
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
Click to expand...
Click to collapse
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
stuck on text sony erricson nothing else can be done
i tried can't feel anymore with my figure of over using it
SmG67 said:
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
Click to expand...
Click to collapse

[Q] xperia ray stuck after sony update

Hi, I have a orange network locked xperia ray st18i locked bootloader. I downloaded pc companion and did a software update and all went well. The phone booted up fine after the update until I shut it down and since then I have been unable to get passed the SE screen. It just hangs there. I am able to enter flash mode by pressing the down button and plugging the usb in. Tried phone repair option and still no jog.
Today I tried to unlock the bootloader using the pin touching menthod but that didnt work either. Said something like fatal error....
I need to unlock the bootloader to try a alternative rom to see if that works or revert back to the stock orange rom it came with but im cannot find this anywhere. I am a learner so any advice would be helpful. CAn anyone suggest a rom for the ray that can be installed using flash method WITHOUT unlocked bootloader? I am a **** for doing the uprgrade via sony website but I didnt think this would happen. should have left it as it was.
Thanks for reading.
Take your battery out and try reflashing again using SEUS.
Thread moved to Xperia Ray Q&A.
Yes I have tried that many times already and it finishes the update correctly but still hangs on the SE logo when turned on. I tried again just to see if anything has changed. When I connected the phone whilst pressing the down vol button it recognised it and said your phone already has the latest software but I re installed anyway. No change in result though.
Sony have asked to send the phone to repair and they will reply with a quote for fixing it. Has anyone used this service before and how much can i expect to pay for a software install? Repair office is in Ashford, kent.
thanks
Read my guide and try flashing a stock ftf file, if that fails theres a few other things you could try.
XperienceD said:
Read my guide and try flashing a stock ftf file, if that fails theres a few other things you could try.
Click to expand...
Click to collapse
Thanks for the reply. Do you know where I can download the stock orange tft file?
rollymac said:
Thanks for the reply. Do you know where I can download the stock orange tft file?
Click to expand...
Click to collapse
There is a method to build the stock ftf from the downloaded sony update service files, do this to build the ftf
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
There is a method to build the stock ftf from the downloaded sony update service files, do this to build the ftf
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
All this techincal talk is affecting my sex life so Id rather stay a noob and focus on the boob!
SO CAN ANYONE TELL ME WHERE I CAN DOWNLOAD THE STOCK FTF FOR MY XPERIA RAY WHICH IS NETWORK LOCKED TO ORANGE AND HAS A LOCKED BOOTLOADER (CANNOT UNLOCK, TRIED TEST POINT METHOD).
I'll click the bloody thankyou button a million times if you can. thankyou!
rollymac said:
All this techincal talk is affecting my sex life so Id rather stay a noob and focus on the boob!
SO CAN ANYONE TELL ME WHERE I CAN DOWNLOAD THE STOCK FTF FOR MY XPERIA RAY WHICH IS NETWORK LOCKED TO ORANGE AND HAS A LOCKED BOOTLOADER (CANNOT UNLOCK, TRIED TEST POINT METHOD).
I'll click the bloody thankyou button a million times if you can. thankyou!
Click to expand...
Click to collapse
It's not as hard as you may think
Use this to create the ftf, it's step by step. If you can't/don't want to do it I can't help you because I have no orange firmware
Sent from my Nexus 7 running Android 4.2.1
mihahn said:
It's not as hard as you may think
Use this to create the ftf, it's step by step. If you can't/don't want to do it I can't help you because I have no orange firmware
Sent from my Nexus 7 running Android 4.2.1
Click to expand...
Click to collapse
thanks for the reply. When I did my upgrade it went through fine so I am assuming I alraedy have the new firmware on my phone. The problem is making it work. Why does my phone just stop and hang on the SE logo? are you telling me my original orange firmware is still in my mobile?
rollymac said:
so can anyone tell me where i can download the stock ftf for my xperia ray which is network locked to orange and has a locked bootloader (cannot unlock, tried test point method).
Click to expand...
Click to collapse
rollymac said:
Why does my phone just stop and hang on the SE logo?
Click to expand...
Click to collapse
HAD YOU READ THE FIRST PART OF MY GUIDE YOU WOULD ALREADY KNOW. Had you even read the stickys in the General section you would have found one.
Right so I created the .ftf file from the three update files. Ive downloaded x10 flash tool. I connect the phone and flashtools registers that a phone is connected then start the flash but soon after the phone just gets disconnected.
any idea's?
rollymac said:
Right so I created the .ftf file from the three update files. Ive downloaded x10 flash tool. I connect the phone and flashtools registers that a phone is connected then start the flash but soon after the phone just gets disconnected.
any idea's?
Click to expand...
Click to collapse
Download the latest flashtool (I guess it's 0.9.x) and install it. Go to the drivers folder and install all the drivers for all the phones and modes. Now you launch flashtool, but don't connect the phone! Click on the flash -> flashmode -> select the ftf and don't exclude anything (you have the ability on the right site).
Now click OK and the screen to connect the phone in flashmode appears. Shut down the phone, wait 20 seconds, hold volume down and while holding volume down connect the phone to PC.
Wait until the flashing process has finished and hope it'll start!
Sent from my Nexus 7 running Android 4.2.1
Thanks for guiding me and yes it finally flashed BUT the phone still hangs on the SE logo when booted up. I read somewhere on here another member had the same issue and it turned out to be the bandwidth???
What should I try now?

Root MANY ANDROID! - error / problem

hello
everything is done in accordance with the instructions and it gives me the box "reconnect the phone's internal memory," I do not understand why this is happening;/ some hints?
xperia sola number 6.1.1.B.1.54
anonimowywybryk said:
hello
everything is done in accordance with the instructions and it gives me the box "reconnect the phone's internal memory," I do not understand why this is happening;/ some hints?
xperia sola number 6.1.1.B.1.54
Click to expand...
Click to collapse
First you need the correct phone forum. This is the Xperia S, Acro S, ION forum. Second, questions go in the Q&A section not the general.
Search for your phones forum.
Reported From Jaramie's LT28at
2012Xperia SOFT-BRICK Recovery Thread
Moved to Q&A
If it's anything like the U .54 firmware then you can't root using that method
Sent from my Jellybean Xperia S
has just;/ no damage from what I read I have to write it 10 do root kernel and then go back to the kernel 54;/
I found the instructions
PROBLEMS .54 SOFTÓW root for:
First Pull the two kernels from the link: LINK
Second You also need to download a program to their upload - Flashtool - LINK
3rd After installing Flashtoola and its drivers, run it and select the option as in the picture:
I already downloaded and pointing kernel extracted by ".10" with option "No final verification"
4th After uploading and re-start should see a little bit strangely our screen, the colors will not be complete, font strange, but do not be dismayed. Now upload the root means that at the beginning of this guide.
5th After successfully uploading the kernel root back to "54". So can flash the kernel Flashtoolem again, this time ending in ".54"
6th After successfully uploading the kernel ".54" everything goes back to normal, and our phone is already zrootowany
but of course I can not connect to flashtol because when push the back button and connect the phone to usb nothing happens the program does not start:> have any suggestions?
anonimowywybryk said:
hello
everything is done in accordance with the instructions and it gives me the box "reconnect the phone's internal memory," I do not understand why this is happening;/ some hints?
xperia sola number 6.1.1.B.1.54
Click to expand...
Click to collapse
Don't worry you aren't the only one with that problem! I faced the exact same problem while rooting my sola!
Follow these steps and guaranteed root!
1. Download flashtool. Just search on Google.
2. Download the kernels 6.1.1.B.1.10 and 6.1.1.B.1.54 for xperia sola. Just search on xda you'll find it.
3. Connect your phone in flashmode with flashtool running on your computer! BEFORE CONNECTING THE PHONE MAKE SURE YOU HAVE TICKED USB DEBUGGING*
4. Flash the .10 kernel and reboot. All icons will turn black don't panic!!
5. Use Bin4ry v18 to restore rootme. After the phone restarts flash it again with. 54 kernel!!
Itll work! Worked for me!
Thank me after its done though I owe no responsibility if anything goes wrong during the process! but it works!
Sent from my MT27i
ok I managed the problem was that instead of press button vol - to enter the mode button flashmode I squeezed back next home ^ ^ oh well man learns from his mistakes ... About to close

[Q] xperia mini st15i Keep on restarting

hello everyone,
i know that this have been probably covered, im searching for days, but i cant find any, it probably buried somewhere. i apologized to the admin, but i really want to solve this problem, i really really need my phone. tnx for your consideration
first thing first, i want you to know that I'm a noob in rooting and its my first post. my phone is sonyericsson xperia mini st15i with IMEI:0Mod Edit: please don't give out your IMEI number on a public forum) and im from philippines using Smart as my service provider, it is a prepaid account.
i followed this steps using instruction from this site "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/"
I think i brick my xperia mini, it keeps on restartting over and over again, heres the story,
*first i performed the downgrade to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf gingerbread using guide from "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/", and it worked and i was able to root it.
*second i performed step 3 of the said guide up to step where you execute “01-local-prop” , then i realized the the firmware i got “4.0.4 firmware” is not appearing in my choices, so i figure its not the right rom, i unplug the usb and restart the phone, then the problem starts, it keeps on restarting over and over, i tried to flash it again to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf but it doesnt work because it keeps on restarting, pls help, it my first time doing root, i know it’s a learning process, i hope you can help me. tnx very much. hope to hear from you soon.
i know that there are same problems with other devices, ive tried to search for it, it does have the same problems but its a different handset, i believed that there are different ways to root for every handset. tnx again, i hope to hear from you guys soon.
Were you able to flash again the Rom or not?
It should be a soft brick so if you'll install again the Rom you should be fine...
Sent from my LT22i using xda app-developers app
Ste91 said:
Were you able to flash again the Rom or not?
It should be a soft brick so if you'll install again the Rom you should be fine...
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
i wasnt able to flash it, because after the sony ericsson logo appears it restart again and again, could you tell me if there's other way todo it, maybe im doing something wrong.
norman.cricket23 said:
i wasnt able to flash it, because after the sony ericsson logo appears it restart again and again, could you tell me if there's other way todo it, maybe im doing something wrong.
Click to expand...
Click to collapse
thank you very much for the quick reply, hope you can help me.
norman.cricket23 said:
i wasnt able to flash it, because after the sony ericsson logo appears it restart again and again, could you tell me if there's other way todo it, maybe im doing something wrong.
Click to expand...
Click to collapse
Follow again the Step 1 of the guide you used (except the isntallation of the program which you already have made) and you should be good to go, with a GB rom, but good to go
Let me know if all goes trough!
Ste91 said:
Follow again the Step 1 of the guide you used (except the isntallation of the program which you already have made) and you should be good to go, with a GB rom, but good to go
Let me know if all goes trough!
Click to expand...
Click to collapse
Thank you very much, thats what im doing over and over again, it doesnt work because it always restart automaticaly after the sony logo appears, can you help me sir step by step, coz in a newbie in rooting. tnx. hope you can help me.
norman.cricket23 said:
Thank you very much, thats what im doing over and over again, it doesnt work because it always restart automaticaly after the sony logo appears, can you help me sir step by step, coz in a newbie in rooting. tnx. hope you can help me.
Click to expand...
Click to collapse
Make sure your phone has a good % of battery left
1) Power off the phone.
2) Start flashtool
3) Click on the Lighting Symbol and Select Flashmode and click OK.
4) Select Appropriate Firmware and Tick Wipe User Data and Wipe Cache check box if visible and click OK. If visible click even exclude TA
PS: The appropriate firmware is a stock firmware for your device. For example the GB rom you downloaded for the downgrade and already placed in the flashtool/firmwares folder
5) click ok and follow the on-screen indications
6) when it asks to plug your device in flashmode, plug the cable in the mobile keeping the Volume DOWN button pushed down.
7) follow the on-screen indications
Ste91 said:
Make sure your phone has a good % of battery left
1) Power off the phone.
2) Start flashtool
3) Click on the Lighting Symbol and Select Flashmode and click OK.
4) Select Appropriate Firmware and Tick Wipe User Data and Wipe Cache check box if visible and click OK. If visible click even exclude TA
PS: The appropriate firmware is a stock firmware for your device. For example the GB rom you downloaded for the downgrade and already placed in the flashtool/firmwares folder
5) click ok and follow the on-screen indications
6) when it asks to plug your device in flashmode, plug the cable in the mobile keeping the Volume DOWN button pushed down.
7) follow the on-screen indications
Click to expand...
Click to collapse
Wooohooo!!! tnx sir, you are heaven sent, my phone is working now, i wanna learn more so o could help someone, just like what you did to me, tnx a lot sir ste9. :cyclops:
No need for calling me sir, and you're welcome
Sent from my Xperia P using xda app-developers app
Ste91 said:
No need for calling me sir, and you're welcome
Sent from my Xperia P using xda app-developers app
Click to expand...
Click to collapse
thank you again, til nxt time.
ST15i restarted again and again
Ste91 said:
Make sure your phone has a good % of battery left
1) Power off the phone.
2) Start flashtool
3) Click on the Lighting Symbol and Select Flashmode and click OK.
4) Select Appropriate Firmware and Tick Wipe User Data and Wipe Cache check box if visible and click OK. If visible click even exclude TA
PS: The appropriate firmware is a stock firmware for your device. For example the GB rom you downloaded for the downgrade and already placed in the flashtool/firmwares folder
5) click ok and follow the on-screen indications
6) when it asks to plug your device in flashmode, plug the cable in the mobile keeping the Volume DOWN button pushed down.
7) follow the on-screen indications
Click to expand...
Click to collapse
hai.
im using st15i and its run icecream sandwich 4.0.4.
after i finished a call my phone keep on restarting again and again..
i have try these method using flashtools version 0.9.11.0
after plug in the cable n keeping the volume down button the flashtools says that
12/015/2013 18:15:08 - ERROR - Error flashing. Aborted
12/015/2013 18:15:08 - ERROR - Drivers need to be installed for connected device.
12/015/2013 18:15:08 - ERROR - You can find them in the drivers folder of Flashtool.
please help...
NazieRoslan said:
hai.
im using st15i and its run icecream sandwich 4.0.4.
after i finished a call my phone keep on restarting again and again..
i have try these method using flashtools version 0.9.11.0
after plug in the cable n keeping the volume down button the flashtools says that
12/015/2013 18:15:08 - ERROR - Error flashing. Aborted
12/015/2013 18:15:08 - ERROR - Drivers need to be installed for connected device.
12/015/2013 18:15:08 - ERROR - You can find them in the drivers folder of Flashtool.
please help...
Click to expand...
Click to collapse
Install all the drivers for all modes/devices from the flashtool installation folder - drivers. Then try it again
Sent from my Nexus 4 running Android 4.3
norman.cricket23 said:
hello everyone,
i know that this have been probably covered, im searching for days, but i cant find any, it probably buried somewhere. i apologized to the admin, but i really want to solve this problem, i really really need my phone. tnx for your consideration
first thing first, i want you to know that I'm a noob in rooting and its my first post. my phone is sonyericsson xperia mini st15i with IMEI:0Mod Edit: please don't give out your IMEI number on a public forum) and im from philippines using Smart as my service provider, it is a prepaid account.
i followed this steps using instruction from this site "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/"
I think i brick my xperia mini, it keeps on restartting over and over again, heres the story,
*first i performed the downgrade to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf gingerbread using guide from "http://xperiahtcrootingrom.com/how-to-root-xperia-mini-st15i-sony/", and it worked and i was able to root it.
*second i performed step 3 of the said guide up to step where you execute “01-local-prop” , then i realized the the firmware i got “4.0.4 firmware” is not appearing in my choices, so i figure its not the right rom, i unplug the usb and restart the phone, then the problem starts, it keeps on restarting over and over, i tried to flash it again to Xperia Mini (ST15i)_4.0.2.A.0.42_CE.ftf but it doesnt work because it keeps on restarting, pls help, it my first time doing root, i know it’s a learning process, i hope you can help me. tnx very much. hope to hear from you soon.
i know that there are same problems with other devices, ive tried to search for it, it does have the same problems but its a different handset, i believed that there are different ways to root for every handset. tnx again, i hope to hear from you guys soon.
Click to expand...
Click to collapse
Well if you again come across the bootloop problem you can check xda university for all around solution "http://xda-university.com/as-a-user/how-to-recover-from-a-bootloop"
And if you are still looking for a way to root your st15i, you can use this easy one click root software, i personally tried it and it works "http://forum.xda-developers.com/showthread.php?t=2219781"

[RESOLVED] Please help, I think I bricked my Z3v when trying to update with flashtool

So, I tried using flashtool for the first time today with my xperia z3v (verizon version). I wanted to update it to the fairly recently leaked lollipop rom (verizon is still on kitkat).
Anyways, I think what happened is that I forgot to turn on usb debugging before flashing the FTF. And now my phone is stuck saying: "the software update failed. Make sure that your phone is connected to the computer and try again."
I've tried reflashing multiple times to no avail. I've tried factory resetting by holding the volume down and power button but that won't work. And Sony PC companion won't pick up the device at all either. Can anyone help me get my phone working again? Maybe I should try flashing a different version? I've been googling for the last 4 hours trying to solve this so any input would be greatly appreciated!!
**EDIT: Nevermind I figured it out here is what I did when I had trouble with flashtool:
Quote:
Originally Posted by fixmewireless
I tired update Z3v with Flashtool to latest version and phone got soft bricked. I downloaded ftr file from server and flashed with flashtool. flashing process went thru, but phone shows message "software update failed".
Only error message I had during flash is ERROR - Error parsing TA file. Skipping
I noticed that flashtool does not have fsc preinstalled for D6708 (z3v). Did that cause the problem?
Can anybody upload fsc for z3v?
thanks
I actually ran into this same exact problem. After I had it soft bricked as you stated, I opened back up flash tool and when to set up the flash, and inside the flashtool I checked every box under Wipe, Also check all boxes under Exclude, EXCEPT SYSTEM. Leave SYSTEM un checked! Check everything under MiscTA Exclude too. I Then ran Flash and let it do its thing until it prompt me to plug in device into flashmode. It the ran the flash successfully and rebooted my device. I then followed the rest of the steps from page one and was able to root the device with no problems. Hope this helps!
If you hold volume down, and plug the usb into the pc, does the updating message appear?
zackdadams said:
If you hold volume down, and plug the usb into the pc, does the updating message appear?
Click to expand...
Click to collapse
Yes it does. So I am able to attempt re-flashing it at least but so far haven't gotten anywhere. Why?
actionjaxon77 said:
Yes it does. So I am able to attempt re-flashing it at least but so far haven't gotten anywhere. Why?
Click to expand...
Click to collapse
It's cusrious you are geting the error parsing TA file. You have a verizon phone so you must be bootloader locked. Were you roted before? Maybe just corrupt FTF file, try downloading it again or try to convert the SIN files to ext4 within flashtool and see if you can read everything correctly with ext4explore.
Sounds to me you soft bricked the phone, which is what I and others also experienced when attempting to flash.
I simply started up flashtool again, loaded the leaked lollipop ftf, and when asked, get back to the "updating" screen on the phone.
The phone should flash correctly.
Like mentioned above, try downloading the ftf again, or download the stock/shipped ftf.
http://forum.xda-developers.com/z3/xperia-z3v-general/guide-sony-xperia-z3v-t3100402
He mentions "1. If you are NOT on stock shipped ROM, 23.0.E.0.376 / R15B, please download..."
That's the shipped version ftf.
The leaked Lollipop ftf link was down, so I used this one:
http://www.androidvillaz.com/2015/09/verizon-sony-xperia-z3v-d6708-android.html
zackdadams said:
Sounds to me you soft bricked the phone, which is what I and others also experienced when attempting to flash.
I simply started up flashtool again, loaded the leaked lollipop ftf, and when asked, get back to the "updating" screen on the phone.
The phone should flash correctly.
Like mentioned above, try downloading the ftf again, or download the stock/shipped ftf.
http://forum.xda-developers.com/z3/xperia-z3v-general/guide-sony-xperia-z3v-t3100402
He mentions "1. If you are NOT on stock shipped ROM, 23.0.E.0.376 / R15B, please download..."
That's the shipped version ftf.
The leaked Lollipop ftf link was down, so I used this one:
http://www.androidvillaz.com/2015/09/verizon-sony-xperia-z3v-d6708-android.html
Click to expand...
Click to collapse
Thanks for the help, I was able to successfully flash it using the info I pasted in my edit to the original post!

Categories

Resources