This is a little flashable zip I put together to be used via cwm / twrp. This is not an official superSU zip, It's put together by me. Note that this will work just fine on all 3 tab 3 10.1 models but as for other devices, it will ONLY work on devices with an x86 processor. Download link and instructions are below.
Instructions (assuming you're completely stock)
1. Download the zip either directly on the device or on your computer. Place in the root of your sdcard.
2. Flash TWRP (via odin). twrp thread found here.
3. When flashing is complete, reboot into recovery.
4. Install the zip in TWRP. Wiping cache/dalvik is recommended, but not necessarily required.
5. reboot, wait for the "android is upgrading" message to be finished.
6. Let sit for about 5 minutes.
7. Reboot tab.
8. Let sit for about 10 minutes upon boot.
9. Open SuperSU and go to settings. Disable and then re-enable superuser.
10. Everything should now be working smoothly you can test root by downloading terminal emulator and typing "su" in the command line.
*note that this will also install busybox*
Download link:
Restl3ssroot.zip
Thanks for your work, TWRP only or can we flash it with CWM?
Envoyé depuis mon GT-P5210 avec Tapatalk
rubiks01 said:
Thanks for your work, TWRP only or can we flash it with CWM?
Envoyé depuis mon GT-P5210 avec Tapatalk
Click to expand...
Click to collapse
Should theoretically work with cwm, I highly reccomend twrp though, it's much more stable and reads your external SD card
Waiting first 5 minutes and before reboot it ask me to update binary. I do it before reboot second time ?
Edit: I haven't remove super utilisateur before...
Envoyé depuis mon GT-I9505 avec Tapatalk
rubiks01 said:
Waiting first 5 minutes and before reboot it ask me to update binary. I do it before reboot second time ?
Envoyé depuis mon GT-I9505 avec Tapatalk
Click to expand...
Click to collapse
If it works go for it. It might not let you update the binary without finishing the steps though
I reboot and wait 10 min but I must remove my old super utilisateur before.
My idea:
- remove super utilisateur
- Reboot and flash custom SuperSu
- wait 5 min before reboot
- wait 10 min....
No ?
Envoyé depuis mon GT-I9505 avec Tapatalk
rubiks01 said:
I reboot and wait 10 min but I must remove my old super utilisateur before.
My idea:
- remove super utilisateur
- Reboot and flash custom SuperSu
- wait 5 min before reboot
- wait 10 min....
No ?
Envoyé depuis mon GT-I9505 avec Tapatalk
Click to expand...
Click to collapse
That should do it. After that go into SuperSu and update the binary. If it won't update then to to SuperSu settings and disable then reenable superuser. Should update fine after that
Working fine with TWRP and CWM
Now the shell don't ask permissions every time, it's good.
Another question: what is the Nonsensical application in the drawer?
Envoyé depuis mon GT-P5210 avec Tapatalk
rubiks01 said:
Working fine with TWRP and CWM
Now the shell don't ask permissions every time, it's good.
Another question: what is the Nonsensical application in the drawer?
Envoyé depuis mon GT-P5210 avec Tapatalk
Click to expand...
Click to collapse
Just a little easter egg I include in all my work, it's supposed to be a little multi level brick breaker game but it seems to be crashing. You can fix the crash by reinstalling it from the apk if you're interested
Yep uninstalled and take it in the flashable ZIP, funny like Atari
Envoyé depuis mon GT-P5210 avec Tapatalk
I went over to the TARP homepage and I am very confused. I did not find a version for the GT - p5220 Tab 3 4.2.2. Can I use another version? I only want to root so I can remove those pesky bloat apps. I am not interested in custom ROMS or whatever. Any help would be appreciated.
I just upgraded to 4.4.2 on my p5210 model
will the root work in 4.4.2? :/
will the root work in 4.4.2
artistiq said:
I just upgraded to 4.4.2 on my p5210 model
will the root work in 4.4.2? :/
Click to expand...
Click to collapse
Same question here. Just updated to 4.4.2 >>> after sucessfull install on TWRP, once SuperSu starts.. it hangs up on App tab.. No response from settings when enable/disable...
PS: all wipes done, just in case.
Any thoughts?
walteroa said:
Same question here. Just updated to 4.4.2 >>> after sucessfull install on TWRP, once SuperSu starts.. it hangs up on App tab.. No response from settings when enable/disable...
PS: all wipes done, just in case.
Any thoughts?
Click to expand...
Click to collapse
Root works fine for me on 4.4.2 (customrom pimpdroid, Philz recovery)
Have you tried to update supersu? Here's the link:
download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip
I'm on restless pimpdroid custom Rom and he said if there are problems with root, we should flash this file..
The super-su update works like a charm. Thx u guys!
Sent from my Galaxy S4 using Tapatalk 4
BigDoun2011 said:
Root works fine for me on 4.4.2 (customrom pimpdroid, Philz recovery)
Have you tried to update supersu? Here's the link:
download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip
I'm on restless pimpdroid custom Rom and he said if there are problems with root, we should flash this file..
Click to expand...
Click to collapse
Thanks @Restless for the root. BigDoun, I also had to flash SuperSU 2.02 using twrp to get root to work. I was on stock 4.4.2.
Sent from my GT-P5210 using XDA Free mobile app
What's with the capatcha bad entries
not rooted, doesn't work p5210
SU 2.78, TWRP 3.0.2.
strangely after I uninstall a Launcher or tried to Root with another file SU.2.24 then upgraded to su 2.78, it finally worked.
Related
Hello
I tried everything but I can't use any 4.3 rom on my S3, it boots but when I try to reboot my phone don't go beyond the samsung bootscreen until I format my entire phone including internal SD card. I tried temasek builds, experimentals build, nightly builds, and I tried fresh install a dirty one, install over a fresh stock 4.1.2 and 4.2.2 flashed with odin, I tried fixing permissions on TWRP and CWM I tried everything but here is the fact, whatever I do I can't reboot my phone on Android 4.3 without formatting it.
I'm not a noob but I don't know what to do, I don't want to get stuck on 4.2.2 forever and now CM won't release any other nightly for CM 10.1
Thanks in advance
Try megawipe?
rootSU said:
Try megawipe?
Click to expand...
Click to collapse
Okay
Edit: My phone still don't boot after a reboot , I can boot CM 10.2 after a megawype but if I reboot the phone then I can't go beyond bootscreen.
Darius_AWS said:
Okay
Edit: My phone still don't boot after a reboot , I can boot CM 10.2 after a megawype but if I reboot the phone then I can't go beyond bootscreen.
Click to expand...
Click to collapse
Silly question but......you have been flashing gapps as well?
Yep the latest one...
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4
Are you restoring any data?
Sent from my GT-I9300 using Tapatalk 4
Nope, fresh start. My phone boot (without any data) and a reboot with or without any data leads to the big fail. I can use the phone but not rebooting..
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4
Weird. Maybe the filesystem is corrupting.
Sent from my GT-I9300 using Tapatalk 4
Darius_AWS said:
Nope, fresh start. My phone boot (without any data) and a reboot with or without any data leads to the big fail. I can use the phone but not rebooting..
Envoyé depuis mon GT-I9300 en utilisant Tapatalk 4
Click to expand...
Click to collapse
Hi this happens to me on teamask 10.2 v11 I think .the fix was to use philz cwm this worked for me hope it workes for you
neilster2020 said:
Hi this happens to me on teamask 10.2 v11 I think .the fix was to use philz cwm this worked for me hope it workes for you
Click to expand...
Click to collapse
I'd be really interested to find out if this works for the OP.
@Darius_AWS - what recovery do you have now?
TWRP and I used CWM as well it didn't change a thing...
It seems that a reboot corrupt the filesystem but i don't know how to avoid that...
Try with Philz as suggested.
Fresh install with Philz worked, you can't explain that but THANKS ! I'll give you thanks for your precious help guys you made my day
Phil has merged CM 10.2 sources into his recovery, where as older CWM's and TWRP have not / can not.
I can only assume it's something to do with that.
I've learned something today.
Me too !
Hi, im using CM11 nightly GT-i9100G.. After finish flashing, after updating binary on SuperSU, it ask me to reboot (recommended). When i reboot onto recovery mode, and install aidfarh kernel, it ask me to fix root. everytime if im booting into recovery. Why is that? Please help me. TQ
khyriel said:
Hi, im using CM11 nightly GT-i9100G.. After finish flashing, after updating binary on SuperSU, it ask me to reboot (recommended). When i reboot onto recovery mode, and install aidfarh kernel, it ask me to fix root. everytime if im booting into recovery. Why is that? Please help me. TQ
Click to expand...
Click to collapse
U dont need to select recovery method when super su asked u to updtae su binary.
Thats for htc devices.
Select normal install method
SENT USING VIVELROM_OMNI
corruptionfreeindia said:
U dont need to select recovery method when super su asked u to updtae su binary.
Thats for htc devices.
Select normal install method
SENT USING VIVELROM_OMNI
Click to expand...
Click to collapse
I do select the normal one. but this is when i reboot into recovery mode. its gone now after o change to TWRP recovery from CWM recovery. i will do a backup and see what will happen next.
after update to latest nightly 4.4.2 KK, i make a backup in Nandroid using CWM Recovery, after finish doing backup, it ask me to fix root? am i the only 1 having this? Just a question.
khyriel said:
after update to latest nightly 4.4.2 KK, i make a backup in Nandroid using CWM Recovery, after finish doing backup, it ask me to fix root? am i the only 1 having this? Just a question.
Click to expand...
Click to collapse
Flash supersu.zip
It's available both in infected omni and vivekrom omni thread.
Sent from my GT-I9100 using Tapatalk 2
Hello all,
Just to announce I RTFM but my brain is maybe broken and I'm a little scared, so i'd rather like to ask before screaming like a baby
So my case:
My device: GP 4.0 YP-G1 Europe(INTL) stock ROM 2.3.6 and kernel stock 2.6.35.7-etc
I was lurking the developement on the galaxy player for 2 years and i decided to install the custom rom Cyanogen mod by Zaclimon.
So today, I read a lot, follow the steps for the specific rom:
-installed android-sdk, adb, rooted to save my efs(~6.25Mo) and when i was on the recovery(the basic one i guess) to flash the .zip, it screens "E:Short write of /tmp/sideload/package.zip (No space left on device)
Installation aborted."
But i have > 5 GB space (so it's not the problem)
So i tried to find a solution with Odin/Heimdall but i can't put on the pda field the zip rom 'cause zip it's not the good extension. I tried to find a solution to have a custom recovery, but i'm not sure if it's the good idea, because in the tutorial by Zaclimon, it's written "from stock do 1,2,3 bla bla"
So now I'm blocked and i would like to flash this device to thanks your works and use it as it should be from the beginning
So it would be nice if someone could help me ^^
PS: Sorry for my english
Aymen74 said:
Hello all,
Just to announce I RTFM but my brain is maybe broken and I'm a little scared, so i'd rather like to ask before screaming like a baby
So my case:
My device: GP 4.0 YP-G1 Europe(INTL) stock ROM 2.3.6 and kernel stock 2.6.35.7-etc
I was lurking the developement on the galaxy player for 2 years and i decided to install the custom rom Cyanogen mod by Zaclimon.
So today, I read a lot, follow the steps for the specific rom:
-installed android-sdk, adb, rooted to save my efs(~6.25Mo) and when i was on the recovery(the basic one i guess) to flash the .zip, it screens "E:Short write of /tmp/sideload/package.zip (No space left on device)
Installation aborted."
But i have > 5 GB space (so it's not the problem)
So i tried to find a solution with Odin/Heimdall but i can't put on the pda field the zip rom 'cause zip it's not the good extension. I tried to find a solution to have a custom recovery, but i'm not sure if it's the good idea, because in the tutorial by Zaclimon, it's written "from stock do 1,2,3 bla bla"
So now I'm blocked and i would like to flash this device to thanks your works and use it as it should be from the beginning
So it would be nice if someone could help me ^^
PS: Sorry for my english
Click to expand...
Click to collapse
Did you flashed a custom kernel (terrasilent, klin) prior flashing the rom? You need to have CWM installed on the device so you can install CM11.
Envoyé de mon Nexus 7 en utilisant Tapatalk
here you can find a list of kernels and roms and stuff. look for the kernel that is compatible with your device and make sure it has clockworkmod. then you can flash that with odin. then when your boot into recovery it will be clockworkmod recovery :good:
I tried to find a solution to have a custom recovery, but i'm not sure if it's the good idea,
Click to expand...
Click to collapse
it's a good idea you should have one
http://forum.xda-developers.com/showthread.php?t=1720457
@zaclimon and Austin68: Thank you for your fast responses. And nop, i didn't install a custom kernel, because i thought that stock = base device with no change or only root, but yeah i will find infos & install a kernel, moreover all infos are recent ? Don't wanna brick it with oldies tutos
Back in few hours, going to flash it after the work, see you and thank's again :good:
Aymen74 said:
@zaclimon and Austin68: Thank you for your fast responses. And nop, i didn't install a custom kernel, because i thought that stock = base device with no change or only root, but yeah i will find infos & install a kernel, moreover all infos are recent ? Don't wanna brick it with oldies tutos
Back in few hours, going to flash it after the work, see you and thank's again :good:
Click to expand...
Click to collapse
All the info written are recent don't worry about it.
Envoyé de mon Nexus 7 en utilisant Tapatalk
I can cry now :crying:
My device seems to be bricked, I know that it can be repaired but more time wasted for you and me
So my steps to fuc* the process:
-I chose the terrasilent 1.3-5 kernel, flash it with Odin with Auto-Reboot and F. Reset time.
So the device worked good, booted to recovery try to find the cyanogenmod 11 zip in the sdcard, but the file recovery doesn't show me anything unless the external sdcard, so i rebooted 2-3 times, but always the same.
-So my brillant idea ... was to re-flash it with the re-partition box checked this time and BOOOM, FAIL + icon like a phone --- /!\ ---- PC on the GP
So please, now you can help the 100% broken brain.
Can't wait for your responses and help
PS: I have my efs.rfs
Seems like you bricked your player but their is no need to fear. Go to the Samsung thread where all ROMs mods and kernels are located and look for rjs kernel 14 Odin. Then download and go to Odin, then where it Say's PDA put that kernel there and flash and you should be in cwm 5.0.2.7 recovery. I bricked my galaxy player about 3 times so this should work. Also if you have a nandroid backup you can restore that only if its gingerbread.
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Seems like you bricked your player but their is no need to fear. Go to the Samsung thread where all ROMs mods and kernels are located and look for rjs kernel 14 Odin. Then download and go to Odin, then where it Say's PDA put that kernel there and flash and you should be in cwm 5.0.2.7 recovery. I bricked my galaxy player about 3 times so this should work. Also if you have a nandroid backup you can restore that only if its gingerbread.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you for the response, but I can't enable the download mode. I'm gonna read carefully and wait help before playing with my device(YP-G1 4.0 INTL) anf get a worst situation.
Aymen74 said:
I can cry now :crying:
My device seems to be bricked, I know that it can be repaired but more time wasted for you and me
So my steps to fuc* the process:
-I chose the terrasilent 1.3-5 kernel, flash it with Odin with Auto-Reboot and F. Reset time.
So the device worked good, booted to recovery try to find the cyanogenmod 11 zip in the sdcard, but the file recovery doesn't show me anything unless the external sdcard, so i rebooted 2-3 times, but always the same.
-So my brillant idea ... was to re-flash it with the re-partition box checked this time and BOOOM, FAIL + icon like a phone --- /!\ ---- PC on the GP
So please, now you can help the 100% broken brain.
Can't wait for your responses and help
PS: I have my efs.rfs
Click to expand...
Click to collapse
If you used re-partition, you will most likely need to flash the full recovery stock rom for the 4.0 Intl models here:
http://forum.xda-developers.com/showthread.php?t=1531850
When you'll flash it, you can then re-partition and it should return to normal. This mode you have is a sort of "forced" download mode. Don't worry about flashing stuff into it with Odin.
troy5890 said:
Seems like you bricked your player but their is no need to fear. Go to the Samsung thread where all ROMs mods and kernels are located and look for rjs kernel 14 Odin. Then download and go to Odin, then where it Say's PDA put that kernel there and flash and you should be in cwm 5.0.2.7 recovery. I bricked my galaxy player about 3 times so this should work. Also if you have a nandroid backup you can restore that only if its gingerbread.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
Don't make him flash anything that isn't made for his device. He has a YP-G1 which is a galaxy player 4.0 whereas rj's kernel is made for the galaxy player 5.0.
Oops I forgot rjs kernel was for 5.0 sorry man
Sent from my YP-G70 using XDA Free mobile app
@troy5890: No problem
@zaclimon: Thanks a lot, it works
Device with a 2.3.6 rooted, so later I will have to know where is my error to not reproduce it (do i have to enable re-partition when flashing with the terrasilent kernel or not) and if it was good or not the first time, why i didn't see in the recovery file manager the zip to install the ROM
But now, going to bed (1:30 AM). See you later and thanks again
Aymen74 said:
@troy5890: No problem
@zaclimon: Thanks a lot, it works
Device with a 2.3.6 rooted, so later I will have to know where is my error to not reproduce it (do i have to enable re-partition when flashing with the terrasilent kernel or not) and if it was good or not the first time, why i didn't see in the recovery file manager the zip to install the ROM
But now, going to bed (1:30 AM). See you later and thanks again
Click to expand...
Click to collapse
1. Good to see that it is working again.
2. You have to NOT check the re-partition case when you flash terrasilent.
3. Did the cm zip was in the internal storage? The /sdcard partition is often (if not always) recognized as the internal storage and not the actual SD card storage.
Also @troy5890 don't worry about it, you wanted to help so it's already better than some so would just skip that one.
Envoyé de mon Nexus 7 en utilisant Tapatalk
zaclimon said:
1. Good to see that it is working again.
2. You have to NOT check the re-partition case when you flash terrasilent.
3. Did the cm zip was in the internal storage? The /sdcard partition is often (if not always) recognized as the internal storage and not the actual SD card storage.
Also @troy5890 don't worry about it, you wanted to help so it's already better than some so would just skip that one.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Thanks dude really appreciate it
Sent from my YP-G70 using XDA Free mobile app
zaclimon said:
3. Did the cm zip was in the internal storage? The /sdcard partition is often (if not always) recognized as the internal storage and not the actual SD card storage.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
I don't have any SD external card, but I knew that i have to set the zip in the "basic device storage".
To recall the process after my work:
1-flash the rooted stock rom 2.3.6 installed with terrasilent 1.3.5 with Odin with the re-partition UN-checked(like yesterday)
2-copy past the zip cyanogen mod 11 by zaclimon with my usb-PC connexion on the root of the storage card.
3-boot in to the CWM recovery
4-go to the "choose zip from sdcard’" line and choose the zip.
The step 4 was my problem yesterday(didn't see any files)
So do i need between the step like the 1st one and the second to wipe data/cache/Dalvik or it was only a bug yesterday ???
Thanks you for reading and help me
Aymen74 said:
I don't have any SD external card, but I knew that i have to set the zip in the "basic device storage".
To recall the process after my work:
1-flash the rooted stock rom 2.3.6 installed with terrasilent 1.3.5 with Odin with the re-partition UN-checked(like yesterday)
2-copy past the zip cyanogen mod 11 by zaclimon with my usb-PC connexion on the root of the storage card.
3-boot in to thw CWM recovery
4-go to the "choose zip from sdcard’" line and choose the zip.
The step 4 was my problem yesterday(didn't see any files)
So do i need between the step like the 1st one and the second to wipe data/cache/Dalvik or it was only a bug yesterday ???
Thanks you for reading and help me
Click to expand...
Click to collapse
It's not normal that you can't see any file when you go into flash zip from sdcard then choose zip from sdcard. Hmm what does it shows when you press it? Maybe with a picture it could be more representative.
Envoyé de mon Nexus 7 en utilisant Tapatalk
zaclimon said:
It's not normal that you can't see any file when you go into flash zip from sdcard then choose zip from sdcard. Hmm what does it shows when you press it? Maybe with a picture it could be more representative.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
It was my yesterday problem for my first try before the GP semi-brick.
Back in 6/7 hours to my home to re-try it and to give you feedbacks.
See you soon
Okaaaaaaaaaaaay, flash it right now
I'm on your ROM zaclimon, so happy to test and play with it.
Thank you really for your big works (because i follow your work on the GP for 2 years and i saw what the community and you have done)
[URGENT HELP]
I was updating apps from playstore. So there was an update for superuser and i updated it as well. After the update superuser asked for some binary file update and had an option for installation through CWM/TWRP Recovery . Since i had it installed i selected that option and the phone botted to recovery and then nothing happened. I was expecting it to auto install. I try to reboot the phone but it boots to recovery everytime. What can i do to solve this? i dont want to flash a ROM because i need to backup contacts first
Next time, choose the "normal" option.
For your problem, reflash CWM through Odin or flash stock recovery.
Sent from my Nexus 5 using Tapatalk
freitaz said:
Next time, choose the "normal" option.
For your problem, reflash CWM through Odin or flash stock recovery.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks Man! Worked phew.!
I have a Galaxy Alpha model SM-G850M, I rooted it and it worked fine, but a few days later I restarted my device and root was gone, i only had the SuperSu app. So i tried to root it again with odin and the CF Autoroot but id don't worked any more. I nade the wipe data factory reset and tried to root again and it gain failed.
Please help mee!!!!!! :crying:
Sebastian.Peter said:
I have a Galaxy Alpha model SM-G850M, I rooted it and it worked fine, but a few days later I restarted my device and root was gone, i only had the SuperSu app. So i tried to root it again with odin and the CF Autoroot but id don't worked any more. I nade the wipe data factory reset and tried to root again and it gain failed.
Please help mee!!!!!! :crying:
Click to expand...
Click to collapse
With ODIN root and install TWRP. After that flash via TWRP SuperSU flashable ZIP and BusyBox, also flashable ZIP and you should be OK.
UniversalKID said:
With ODIN root and install TWRP. After that flash via TWRP SuperSU flashable ZIP and BusyBox, also flashable ZIP and you should be OK.
Click to expand...
Click to collapse
Thanks, !! I'm gonna try it. But I'm so happy for your answer!!
UniversalKID said:
With ODIN root and install TWRP. After that flash via TWRP SuperSU flashable ZIP and BusyBox, also flashable ZIP and you should be OK.
Click to expand...
Click to collapse
Hello again Universalkid, I tried to do taht but I domn´t know what is a TWRP an how can I flash Supersu via TWRP. Can u explain me how to do the whole process? Please!! Greetings from Switzerland!!
If you don't know what it is, and are too lazy to Google, it means you shouldn't be doing this.
Wysłane z mojego SM-G850F przy użyciu Tapatalka
Sebastian.Peter said:
Hello again Universalkid, I tried to do taht but I domn´t know what is a TWRP an how can I flash Supersu via TWRP. Can u explain me how to do the whole process? Please!! Greetings from Switzerland!!
Click to expand...
Click to collapse
TWRP is a custom recovery. But before you do all that, I suggest you to google all about custom recovery, SuperSU, BusyBox and how to flash ZIP's from TWRP. Read carefully all the instructions and tutorials and only after you done that, go ahead and try it on your phone. This way you will not brick your device. Good Luck.
Re-authentication
I successfully installed TWRP, and after that, I installed SuperSU. I works at first, but after rebooted the device, re-authentication doesn't work. I can still use SuperSU to root apps, but just first time. Not after rebooted.