I just went through the process of compiling a custom ROM and they used a stock kernel. I would like to incorporate a different kernel when I compile and instead of the stock. I know I could compile them separately and have them flash together but I want one zip to flash. Just would like to go through the process to learn.
Any help on how to do this or what I have to do when compiling?'
Thanks.
MAXGEN said:
I just went through the process of compiling a custom ROM and they used a stock kernel. I would like to incorporate a different kernel when I compile and instead of the stock. I know I could compile them separately and have them flash together but I want one zip to flash. Just would like to go through the process to learn.
Any help on how to do this or what I have to do when compiling?'
Thanks.
Click to expand...
Click to collapse
One of the easiest ways of doing this would be to take the boot.img thats contains the custom kernel you want and deleting the stock boot.img containing the stock kernel in your .zip file and replacing that with the boot.img of the custom kernel. Essentially you are just swapping the boot.img file in the .zip files with the one containing the custom kernel rather then the stock kernel. Let me know if you need me to explain things further or have any other questions I'll be happy to help you out.
shimp208 said:
One of the easiest ways of doing this would be to take the boot.img thats contains the custom kernel you want and deleting the stock boot.img containing the stock kernel in your .zip file and replacing that with the boot.img of the custom kernel. Essentially you are just swapping the boot.img file in the .zip files with the one containing the custom kernel rather then the stock kernel. Let me know if you need me to explain things further or have any other questions I'll be happy to help you out.
Click to expand...
Click to collapse
Thanks for the response.
I have to first compile the custom kernel then it seems like an easy process after that. I'm going to try to compile Franco kernel for nexus 5 if u heard of it. Its been pretty good for me.
Any tips for compiling another project or Franco kernel would be great!? I will make a separate folder for that kernel git project and compile it there.
I also want to use tool chain like Linaro and maybe Sabermod but those are for nexus 4, maybe I can port it over.
MAXGEN said:
Thanks for the response.
I have to first compile the custom kernel then it seems like an easy process after that. I'm going to try to compile Franco kernel for nexus 5 if u heard of it. Its been pretty good for me.
Any tips for compiling another project or Franco kernel would be great!? I will make a separate folder for that kernel git project and compile it there.
I also want to use tool chain like Linaro and maybe Sabermod but those are for nexus 4, maybe I can port it over.
Click to expand...
Click to collapse
Franco kernel is an excellent kernel can't really go wrong with it. On your other note, Linaro is not Android device specific it can be used to compile kernels for a plethora of devices, I would recommend taking a look at this great guide on how to use Linaro to compile your kernel and how to customize the Linaro toolchain to suit your needs.
shimp208 said:
Franco kernel is an excellent kernel can't really go wrong with it. On your other note, Linaro is not Android device specific it can be used to compile kernels for a plethora of devices, I would recommend taking a look at this great guide on how to use Linaro to compile your kernel and how to customize the Linaro toolchain to suit your needs.
Click to expand...
Click to collapse
So I tried following the post. Just not sure about a lot of things and got confused and couldn't compile.
So what I'm trying first before I use the LInaro tool chain is to try to compile the Franco kernel without it. I clone Franco hammerhead git and link the arm-eabi-4.6 toolkit
make hammerhead_defconf
make -j7
Seem to compile with no errors, took a minute though which seems quick but not sure where it exported to.
Tried looking in the arch/arm/boot/ but no look.
I want compile a boot.img as well.
MAXGEN said:
So I tried following the post. Just not sure about a lot of things and got confused and couldn't compile.
So what I'm trying first before I use the LInaro tool chain is to try to compile the Franco kernel without it. I clone Franco hammerhead git and link the arm-eabi-4.6 toolkit
make hammerhead_defconf
make -j7
Seem to compile with no errors, took a minute though which seems quick but not sure where it exported to.
Tried looking in the arch/arm/boot/ but no look.
I want compile a boot.img as well.
Click to expand...
Click to collapse
I would recommend trying the following procedure:
Code:
mkdir franco
cd franco
git clone https://github.com/franciscofranco/hammerhead.git
After the clone operation completes rename the cloned folder to hammerhead or make sure it named hammerhead.
Now make sure your are in the franco folder you created and run the following commands:
Code:
git clone https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6
export PATH=$(pwd)/arm-eabi-4.6/bin:$PATH
export ARCH=arm
export SUBARCH=arm
export CROSS_COMPILE=arm-eabi-
cd hammerhead
make hammerhead_defconfig
make -j4
Once it finishes this you should now have a zimage outputted in the path arch/arm/boot/zImage. To make the process of putting your zimage and module together run the following commands:
Code:
mkdir ~/franco/kernel_output
cp ~/franco/hammerhead/arch/arm/boot/zImage ~/franco/kernel_output/zImage
find ~/franco/hammerhead -name "*.ko" -exec cp {} ~/franco/kernel_output \; (You may have to run the command without the ";")
You should now have everything you need to make a boot.img. Let me know how it goes and if you still have questions.
Thanks for your help, W-XC (curious what that means and you have flying shoe is it because you run? You running in the next Boston Marathon?)
The kernel is actually using 4.7 so I just used the right git. I also found out it wasn't compiling because there was any error in that specific driver for CPU governor. The dev actually was about to push a fix and supposedly it will be push tomorrow but shared the commit so I was able to make the fix manually. Either case it compiles now. Working on step 2 which is to compile into the ROM.
I was curious you seem to know your stuff. Are you kernel dev? How did you gain your knowledge? I wanna learn more about Android OS and linux kernel? I taken basic OS classes in college so a lot of introduction to concepts but nothing on coding it though. Any books or anything you can recommend on any of these areas or anything closely related worth knowing? Thanks again.
For making a boot.img I tried the following. What would you suggest for mkbootimg?
I used this script to get my ramdisk.
http://www.enck.org/tools.html
But I'm little confused on where do you get the script for mkbootimg?
Is it from the android source or is it generated when you build the kernel or is it some script that someone made?
I found this posting for building a kernel with mkbootimg but the dilemmaI"m no having is what is correct commands for building.
http://www.droidforums.net/forum/rescue-squad-guides/31452-how-compile-your-own-kernel.html
The dev mention some commands in a posting several months ago.
http://forum.xda-developers.com/showpost.php?p=47167725&postcount=291
That might be a way to go but the argument doesn't take with the mkbootimg from the droid forums. Syntax is not right so it makes me think that mkbootimg is unique.
MAXGEN said:
Thanks for your help, W-XC (curious what that means and you have flying shoe is it because you run? You running in the next Boston Marathon?)
The kernel is actually using 4.7 so I just used the right git. I also found out it wasn't compiling because there was any error in that specific driver for CPU governor. The dev actually was about to push a fix and supposedly it will be push tomorrow but shared the commit so I was able to make the fix manually. Either case it compiles now. Working on step 2 which is to compile into the ROM.
I was curious you seem to know your stuff. Are you kernel dev? How did you gain your knowledge? I wanna learn more about Android OS and linux kernel? I taken basic OS classes in college so a lot of introduction to concepts but nothing on coding it though. Any books or anything you can recommend on any of these areas or anything closely related worth knowing? Thanks again.
Click to expand...
Click to collapse
MAXGEN said:
For making a boot.img I tried the following. What would you suggest for mkbootimg?
I used this script to get my ramdisk.
http://www.enck.org/tools.html
But I'm little confused on where do you get the script for mkbootimg?
Is it from the android source or is it generated when you build the kernel or is it some script that someone made?
I found this posting for building a kernel with mkbootimg but the dilemmaI"m no having is what is correct commands for building.
http://www.droidforums.net/forum/rescue-squad-guides/31452-how-compile-your-own-kernel.html
The dev mention some commands in a posting several months ago.
http://forum.xda-developers.com/showpost.php?p=47167725&postcount=291
That might be a way to go but the argument doesn't take with the mkbootimg from the droid forums. Syntax is not right so it makes me think that mkbootimg is unique.
Click to expand...
Click to collapse
The W-XC in my avatar stands for Watertown Cross-Country which is the team I used to run on and the flying shoe with the track wings represents our track team, as I love to run I thought it was a fitting avatar. As far as running the Boston marathon I am not running this year but I would love to someday, I am unfortunately not in good enough form to run a marathon right now due to a prolonged battle with an injury I sustained last spring, but I'll keep training and keeping running!
I'm glad you were able to make the fix on the kernel, often times errors that seem to pop out of nowhere are related to fixes not being pushed to the repository you were syncing and using to build at the time. Thank you for the nice compliment it is greatly appreciated, I am not a kernel developer just an overall aspiring developer who loves everything Android related and trying to contribute and help others however I can. I would say 99% of my knowledge of everything Android related has come from XDA and hours upon hours of Googling things related to kernel development, reading about something not understanding something then Googling the parts I didn't understand, piecing together things then Googling more things to help me understand, after a while you slowly start putting the pieces of knowledge together as you learn more and then you still keep learning. For resources on learning kernel development I would recommend learning the C programming language as it is the building block of kernel development. A great resource for learning C is the free online e-book Learn C The Hard Way. Another critical element of understanding Android kernel development is the Linux Kernel and it's drivers which is why I would recommend taking a look at Linux Device Driver's Third Edition, while parts of it are outdated the fundamental concepts are still very much applicable. As far as pure Android Kernel aspects and Linux Kernel aspects go the free-electrons group has some invaluable presentations that cover these subjects as well as other critical areas of embedded development that relate to kernels.
For the mkbootimg binary I would recommend downloading these unpack, repack, ramdisk tools. They have proven invaluable for me when working with img files and kernels. Download the scripts and binaries and put them in your ~/bin folder and make sure to give them the proper permissions that way they will be in your path and you can use them properly. Once you have them installed I would recommend obtaining a copy of the Nexus 5's latest boot.img (The factory images Google Provides should have it in the images .zip file included in the factory image). After doing that decompile the stock boot.img file using the umkbootimg binary, this should present you with an output of a ramdisk and a zimage. Next, take the zimage you compiled with the franco kernel source and replace the stock boot.img zimage with the zimage you compiled from franco kernel. Then run the mkbootimg binary with command (In terminal it should give you the command to easily re-pack the boot.img) to re-pack your new boot.img. The output of the new boot.img will have the default name new_boot.img or similar name. Re-name this file to boot.img and delete the old boot.img from your .zip file of your ROM and swap in the boot.img file you just created. You have now included the custom kernel you wanted in your ROM.
As always let me know if you still have questions I'll be happy to answer them :good:.
Thank you so much!!! Probably going to have to take some time to digest everything but definitely will have more questions when I'm done.
Quick question, do you have see "C" being replace? I have read some C code but haven't not yet coded anything in C. I been told that low level access you get with C is not comparable with other languages. I guess you would have to go to ASM to get even more access. ASM personally I run from it, probably should do more of it for practice. We do a lot of high level language C++, java, python and some others in school but no C. I probably can't avoid not being comfortable in it? C is not going to be replace by anything in future??
MAXGEN said:
Thank you so much!!! Probably going to have to take some time to digest everything but definitely will have more questions when I'm done.
Quick question, do you have see "C" being replace? I have read some C code but haven't not yet coded anything in C. I been told that low level access you get with C is not comparable with other languages. I guess you would have to go to ASM to get even more access. ASM personally I run from it, probably should do more of it for practice. We do a lot of high level language C++, java, python and some others in school but no C. I probably can't avoid not being comfortable in it? C is not going to be replace by anything in future??
Click to expand...
Click to collapse
You are correct in that to get even more low level access you start getting into assembly territory. What makes assembly difficult and what makes people from run form it is unlike very high level languages such as Python, Java, etc. it is much less human readable and a lot closer to machine language (Binary code), however like anything practice makes perfect the more you practice with a language the easier things get and the more confidence you have in programming things with it. If you really want to customize and develop kernels C is a must there is no getting around that unfortunately. As far as C being replaced with anything in the future, will it ever be replaced, probably as is the case with technology, but as far as it being replaced with anything equivalent or better in the next 10-20 years I doubt it, as it would take years to develop a new standard and even longer to be adopted and standardized to the point C is used and accepted today.
Related
Hiya I am interested in compiling my own version of the android project from the latest sources for Hero but I am having a little bit of trouble, I have been attempting to follow this guide android.modaco.com/index.php?showtopic=301857&view=findpost&p=1179830 but it does not seem to make a lot of sense to me. For instance there is no .repo/local_manifest.xml file only a .repo/manifest.xml file and editing this as outlined gives me an error. Could somebody point me in the direction of a fairly noob friendly guide for this kind of stuff, thanks a lot.
Conb123
P.S Sorry about the dodgy link, newbie restrictions prevented me from formatting it properly
this should be in Q&A Section not development really. But im looking for this too! installed ubuntu using Wubi set up JDK,SDK testsign etc and repo but god knows how to do it all! I only want to port cyanogenROM
follow this: http://source.android.com/download
when you got everything synced you can basically type "make" and watch it compile for a while. i managed to do it with just above zero knowledge about compiling.
if you want the cyanogen sources try it with the according repo. i have zero idea about vendor overlays, as i needed to compile only the recovery (watched two hours of eclair compiling, then was told i need cupcake sources and can compile the recovery only...)
Yes I am aware of how to get sources and how to compile them, I am fairly well versed in linux. But I do not know how I can compile it into a usable rom for hero.
the result of the compiling are image files that can be flashed to the phone: system.img etc. you can extract them using unyaffs.
I ran the make command, but i really have no idea what to do from there. What is the end result of doing the first make command? Im fairly sure that it is not a single .img file you can flash onto your phone. You need to make a kernal if i am correct(anyone know how to do this?)
the result of the compiling is at least a system.img. if you compiled it correctly you can flash that to /system partition. further you need a boot.img, which also contains the kernel. the the rom-cooking howto in dev section how to create one, or just get one from a working rom.
fwiw, the .img files are in out/target/product/generic/ (although there probably is a device specific directory in there if you handled the vendor overlay correctly. <- this is just a guess, i have actually no idea).
Wanna link us to that how to thread? I cant seem to find a complete one with working links.
http://forum.xda-developers.com/showthread.php?t=551711
Hi everyone.
I'd really like to know the steps to modify, recompile and finally build a kernel zip to flash on our O1.
For instance, I'm downloading the ThunderG Kernel from mik_os here: https://github.com/mik9/ThunderG-Kernel
But I really dont know how to procede.
The programming language seems to be C++, but...
Which compiler should I use to compile it?
The source code is 100+ Mb sized, how can I build the kernel in a simple zip to let me flash it through custom recovery?
I'm really new to all this, I've little experience in C/C++/Java programming, and I'd really like to know how to procede.
An example of initial use I'm interested in, is summing up various fixes from different kernel's and make a unique kernel to flash on my phone.
For the real example:
This: http://forum.xda-developers.com/showthread.php?t=929941
plus this: http://forum.xda-developers.com/showpost.php?p=11166426&postcount=47 (waiting for source from the author)
I'd be really glad to see a newbie (not completely ^^) step-by-step guide doing everything from Windows platform.
I already read other topics on this argument, but none of them had a real guide that could be useful to anyone.
I want to thank you in advance
I'm interested too!
To start with change ur pc os to ubuntu 10.10
ccdreadcc said:
To start with change ur pc os to ubuntu 10.10
Click to expand...
Click to collapse
Couldn't Compiling and building a source code be done from any platform?
As far as I know it should (though I'm not an expert ^^).
I'd like to know if this can be done from Windows, as I'm not planning to change os at the moment
You can always use a Live CD of Ubuntu 10.10.
badeaioan said:
You can always use a Live CD of Ubuntu 10.10.
Click to expand...
Click to collapse
That's not the problem, I already installed Ubuntu other times, but I did a complete format these days and I'm not planning to install it anymore for now.
I still believe that I dont need it to compile a C/C++ source
I'd like to know the steps so I can say it surely.
If Linux is absolutely needed, I just want to know
I thing, that it can be possible compile on other system (cygwin + compilers, library, ...) but you will must download huge dependent software/library/source code. It probably will have same size as whole system :-/
Ok you convinced me, let's say I want to do it on ubuntu, could someone make a guide for everyone?
that would be great!
Sent from my LG-P500 using XDA App
I use gcc for compiling stuff. How to turn the compiled stuff into a package (for flashing) however, is what I don't know
What I would also like to know is how to incorporate a kernel into a ROM. That would shed some light. Thanks to whoever answers this!
The ThunderG package includes a lot of things, do I have to compile the "kernel" folder only to build a kernel for flash?
I really don't know how to procede... ^^
I'm installing Ubuntu 10.10 right now trough wubi..
Sippolo said:
Couldn't Compiling and building a source code be done from any platform?
Click to expand...
Click to collapse
No, especially the kernel source code makes heavily use of filename case sensitivity.
In linux abcd.e and abcD.e are different files- in windows they are not.
Extract a linux Kernel in windows and you will see what I mean.
So even if you got the cross compilers and libs together you will not be able to compile the kernel.
Cygwin is a way- but you could also run XUbuntu with VirtualBox which easier.
The best and fastest is a native linux system.
Sippolo said:
The ThunderG package includes a lot of things, do I have to compile the "kernel" folder only to build a kernel for flash?
Click to expand...
Click to collapse
Get the android ndk, extract it and append the folder with "arm-eabi-gcc" to your system path (export PATH=$PATH:"$NDKPATH/toolchains/arm-eabi-4.4.0/prebuilt/linux-x86/bin").
Extract Thunderg_Kernel.tar.gz, go to the directory and run "make thunderg-perf_defconfig" that will create a .config for the kernel. Or grab your O1 config from /proc/config.gz (per adb, ftp server app, copy with file manager to sd card...) and move it to $kerneldir/.config.
Have a look at "make menuconfig" and then try "make zImage".
Maybe you must install a few dependencies with synaptic (when you are using ubuntu).
kpbotbot said:
I use gcc for compiling stuff. How to turn the compiled stuff into a package (for flashing) however, is what I don't know
What I would also like to know is how to incorporate a kernel into a ROM. That would shed some light. Thanks to whoever answers this!
Click to expand...
Click to collapse
Load mik_os' touchscreen fixed kernel and extract the zip file.
Delete the cert* and manifest* files under META-INF.
Change the zImage under Kernel maybe the kernel modules (system/lib/modules) too.
ZIP it all together again (directory structure must be the same as in mik_os' zip).
To sign read this: http://www.robmcghee.com/android/creating-an-android-update-zip-package/
or this: http://www.londatiga.net/it/how-to-sign-apk-zip-files/
hello, first of all to compile a kernel you need to config this kernel (enabling the drivers you are intersted in, kernel tweaks... and so on)
to do that (on linux) go to your kernel directory and run this command
make menuconfig
this would run the gui config for the kernel where you can configure the kernel.
anyway every board or device has it's own configureations os the kernel can handel the hw on this device you can start gussing what are the right configurations for the P500 which is not an option at all hehehe
or you can use the predefind config included in the Thunderg kernel
to use that config go to the kernel folder and run this command
make thunderg-perf_defconfig
this command will configure the kernel with the predefind configuration
after that you need to compile the kernel using a cross platform compiler, the machine you are working on is x86 but P500 mobile have an ARM cpu so you can't just compile the kernel for your machine and run it on the mobile to do that find a cross compiler on the net (i use the CodeSourcery) then compile your kernel using this command
make CROSS_COMPILE={path to the corss compiler bin}
after finishing the compile process (first time it would take a while) you will find a file called "zImage" which is the kernel for the ARM cpu under the directory arch/arm/boot inside your kernel directory
then to flash that image to your device you need to create your own ROM and sign it then flash it using the coustom recovery.
hopt that this info is useful and sorry for any wrong information
Thanks everyone
I found out that android ndk solution was much easier and straightforward.
Now I've my zImage ready in "ThunderG-Source/arch/arm/boot/" directory (not in the kernel directory as waleedq stated?).
Now I cant understand the meaning of "signing" my kernel to a custom ROM, I'm using the custom recovery from http://forum.xda-developers.com/showthread.php?t=844483
I've read the two articles above about signing an application .apk to your rom and generate an update package.
But here I dont have an apk but a zImage which I really dont know how to use ^^
Isn't there a way to directly create the kernel update zip file and flash it with custom recovery?
P.S. Surfing on the web I found this link, might be useful to someone: part1: http://lazydroid.com/2010/06/how-to-compile-kernel-part-1/ part2: http://lazydroid.com/2010/06/how-to-compile-kernel-part-2/ It just explains what you have already explained though
Sippolo said:
Thanks everyone
I found out that android ndk solution was much easier and straightforward.
Now I've my zImage ready in "ThunderG-Source/arch/arm/boot/" directory (not in the kernel directory as waleedq stated?).
Click to expand...
Click to collapse
Your "kernel" directory has the name "ThunderG-Source"
It is all ok- waleedg didn't mean the "kernel/kernel" directory
Sippolo said:
Isn't there a way to directly create the kernel update zip file and flash it with custom recovery?
Click to expand...
Click to collapse
Read my post more thoroughly (I have edited it)
Yeah I did understand what you wrote in that reply, just was wondering what is "signing" actually, but I found out when doing it
Now I've my signed kernel update to flash
I used the SignApk jar program to do it, it's fast and I've everything already done and ready for future signing (certificate and key must not be remade each time as far as I see, I just need to sign each new zip with the already present certificate/key).
Thank you everyone, now I'm finally done with this request, it's solved
Side Question to waleedq: will you publish the code of your workaround for axis inversion? I'm curious which source file handle these things, should be /drivers/input/touchscreen/mcs6000_ts.c, am I wrong?
Sippolo said:
Yeah I did understand what you wrote in that reply, just was wondering what is "signing" actually, but I found out when doing it
Now I've my signed kernel update to flash
I used the SignApk jar program to do it, it's fast and I've everything already done and ready for future signing (certificate and key must not be remade each time as far as I see, I just need to sign each new zip with the already present certificate/key).
Thank you everyone, now I'm finally done with this request, it's solved
Side Question to waleedq: will you publish the code of your workaround for axis inversion? I'm curious which source file handle these things, should be /drivers/input/touchscreen/mcs6000_ts.c, am I wrong?
Click to expand...
Click to collapse
yes i am publishing the code , today if i got some spare time
and about the mcs6000_ts.c yes this is the driver that handel our screen
here is the workaround source code
https://github.com/waleedq/ThunderG-Kernel/blob/thunderg_oc/drivers/input/touchscreen/mcs6000_ts.c
i just forked nik_os kernel and added my workaround code to it so now all the features are implemented
waleedq said:
here is the workaround source code
https://github.com/waleedq/ThunderG-Kernel/blob/thunderg_oc/drivers/input/touchscreen/mcs6000_ts.c
i just forked nik_os kernel and added my workaround code to it so now all the features are implemented
Click to expand...
Click to collapse
That's perfect, thank you
you are welcome my friend hope that someone will make it better than this stage
Hello,
I want to compile Android from source. I want to just build a fully default Gingerbread that would run nice on my phone. I got the Android source, kernel source (kernel-2.6.32-U8800-Froyo) and now I don't know what to do next. I compiled the generic one already (lunch full-eng) and it ran fine on the emulator.
My most important question is, if I make it otapackage and flash it, would it start? If it doesn't, can I recover? What folders/files are essential if I make my own device for example in "device/huawei/u8800"
Also, where can I find a GOOD porting guide? I have found some that are old and not used anymore.
Some links
Start by going through source.android.com for the general basics if you havent already.
Also, even though Google removed the PDK (Platform Developer's Kit) from the site, it has been mirrored on kandroid here: http://www.kandroid.org/online-pdk/guide/index.html
The stuff in the the PDK, although inadequate, is still very important and explains how to create the necessary makefiles to add to the build, configuring for a new market, etc. etc.
Also,
watch these two videos over here. These were very helpful in my ROM development:
http://www.youtube.com/watch?v=1_H4AlQaNa0
http://www.youtube.com/watch?v=rFqELLB1Kk8
Learn to use github. It is helpful for you to keep track of your changes as well as incorporate others works into your own.
http://help.github.com/
Finally, Cyanogenmod repos are your BEST friend. Almost all major AOSP ROM devs owe some sort of thanks to those guys who have done so much. If you want to check out some of the code changes and patches that you want to incorporate look here on their gerrit:
review.cyanogenmod.com
If you want to look at the other changes that are actually in the cyanogenmod builds, best to look at their git repos here:
https://github.com/CyanogenMod
I am still learning right now while I create my ROM but your welcome to PM me if you have any questions
Glad someone helped. Now that ICS is available, I will build that instead. Now, I will follow the kandroid tutorial and add hardware_msm7x30 from cyanogenmod's repos. Then I'll make my own makefiles in the huawei/u8800 and I'll see if that works.
Also, some things I am not still clear. If I am not adding any recovery files, it shouldn't replace it, right? I want to make sure I can recover. However, my phone has a bootloader mode, which should still work, even if other's messed up. And the kernel, if I already have a compiled kernel for android 2.2, should it work for newer versions?
Thanks
Well AOSP as far as I know adds the stock recovery into the build so if you have a stock ROM, then you will lose your recovery (unless you change the source to skip the adding of recovery to otapackage).
Your bootloader should be fine. so you will theoretically be able to re-flash a custom recovery with fastboot as long as your bootloader is unlocked (assuming your phone is already rooted and has a custom rom, then it should be unlocked)
If you are using CM7 as base, then you dont have to worry about it as it is configured to NOT replace the recovery during the building and creating the otapackage.
The kernel should not be compatible as there were significant changes from Froyo and you should not use it. By the way, for now, work on the ROM first. Creating a custom kernel from scratch is hard work and should be left as the last task to do (assuming you know linux kernel development). Just use the stock pre-built kernel that comes with the source.
Also, according to Google:
Starting with IceCreamSandwich, the Android Open-Source Project can't be used from pure source code only, and requires additional hardware-related proprietary libraries to run, specifically for hardware graphics acceleration.
Click to expand...
Click to collapse
This means you need to find the correct hardware drivers first. Where to find that is beyond me. Check CM repos. It would be easy if everyone had a Nexus S/ Galaxy Nexus as the drivers are immediately available on source.android.com. Ah...well....
Personally, I am going to wait a few weeks before dabbling into ICS ROMs. Wait till CM7 comes out with a nightly for my nexus one and then rip the drivers from their ROM and use it for mine
I got ICS source and made the necessary Android.mk, AndroidProducts.mk, BoardConfig.mk and u8800(my device).mk, also vendorsetup.sh . Now, when I am trying to build it doesn't give me an error, more of a suggestion. It says to include "LOCAL_MODULE_TAGS := optional" in the hardware/msm7k/liblights/Android.mk. I added that, and tried again. Got that message again, but with other type /libril/Android.mk
About fastboot, I am not sure if my device has that. It can be turned on with volume up and down + power, but it boots to so called "pink screen". When I mount phone using usb to my pc, I can browse the recovery.img and other related stuff. If I have the otapackage, can I just take the recovery out from there or what should I modify in source? Add something to the makefiles?
Yeah I am pretty sure you should add the LOCAL_MODULE_TAGS to all of the relevant pre-built files. maybe they made the compiler less harsh in ICS when compared to the one for gingerbread. In gingerbread, it outright crashed the compile and asked you to add the tags.
According to Google engineers, here is the reason why they use these tags:
Short answer: lack of time.
The urgent concern was to prevent new modules from using a user tag
(implicitly or explicitly), and we took care of that. We haven't had
time to deal with the existing modules, there are over 1000 of those.
JBQ
Click to expand...
Click to collapse
By the way, I hope you have git setup and the changes you have made are being staged and commited to your repo in github. If you ever make a mistake that hardcore crashes your compile and you dont know what you did, git will be there for you to rollback the changes as well as keep track of everything you have done from commit to commit
As far as I know, CM repos dont have everything complete for a full build of ICS but I could be wrong.
So you are working with AOSP correct?
As for the fastboot every android phone should have a fastboot by default but I believe each phone has a slightly different version. I will post how my fastboot looks like in a bit.
As for the removal of recovery, there should be somewhere in either source, makefiles or argument for the otapackage command that should leave out the recovery when making update.zip. You could just remove the recovery from the update.zip, change the updater-script and repackage it but its not a clean solution and those changes should be done in a uniform manner so you dont repeat this step every time you do a new build.
Where exactly is it, I have yet to know. Still learning much of this myself.
I now completely understand what modes of turning on my phone has... First one is normal, second is recovery, third is update-bootloader(I can access all files with it too) and four being the fastboot. The custom recovery I have on has an issue that it wants to boot to charging mode when I type "adb reboot bootloader". I can get to fastboot with the custom ROM I have on right now though. I think I am safe if I have issues.
I edited msm7k Android.mk to remove libaudio and libgralloc (errors with those), and it compiles to the step where it says it has no rule to make kernel requied by boot.img. I have put into BoardConfig.mk the line TARGET_PREBUILT_KERNEL with my kernel. I don't understand, what's wrong now...
My goal is to simply get it booting up. I'll look into libraries and other later.
-e-
Got the kernel thing sorted out. Copied device.mk from tuna device and edited to fit my device. Also modified full_u8800.mk and made the call to inherit from device.mk. Compiling now and I think I got past that.
-e2-
Got it built successfully. Fastboot won't let it install, because it has no mount points. Added mount points and let's see...
Nice to see you are making progress.
Got it built, but the fastboot is kinda buggy in my device, maybe custom rom issue. I can't make otapackage, it says "no rule to make target otapackage". I have a possible fix, trying that later.
Otherwise, I read its possible to flash system.img from recovery via advanced restore, update.zip package or advanced flash_image, but I don't know. Will post results.
Sent from my u8800
-e-
Tried make otapackage again. It still says "make: *** No rule to make target `otapackage'. Stop.". Maybe some things are still missing, I don't know. adb flash_image command will always post -1 to me, update.zip didn't work, advanced restore is not for this. I have a compiled image and I can't wait to test it, but I can't flash it...
If nothing works I'll revert to stock ROM and try again.
Blefish said:
Got it built, but the fastboot is kinda buggy in my device, maybe custom rom issue. I can't make otapackage, it says "no rule to make target otapackage". I have a possible fix, trying that later.
Otherwise, I read its possible to flash system.img from recovery via advanced restore, update.zip package or advanced flash_image, but I don't know. Will post results.
Sent from my u8800
-e-
Tried make otapackage again. It still says "make: *** No rule to make target `otapackage'. Stop.". Maybe some things are still missing, I don't know. adb flash_image command will always post -1 to me, update.zip didn't work, advanced restore is not for this. I have a compiled image and I can't wait to test it, but I can't flash it...
If nothing works I'll revert to stock ROM and try again.
Click to expand...
Click to collapse
If you successfully compiled, take the boot.img and system.img and package them into a zip and use dsixda's kitchen to make it flashable
Blefish, is it possible for you to share your device/vendor structures somewhere? I just finished setting up a build machine for ICS (using Cyanogenmod's repos in my case), and made a working full-eng image that seems to boot just fine in the emulator, so I'm seemingly all ready to hack around our device's specifics. But I would rather not do duplicate work, so I decided to ask
I'm also grabbing Huawei's new 2.6.35-based package to get the new kernel config, can't wait for them to release the actual sources for the update.
I'll share them on GitHib once I get a working build. I haven't got much time, and I changed to CM9 alpha now (repo branch ics). Since we got a 2.3 update, my first task is to port the latest clockworkmod recovery and then the ICS.
Compiling Android is long task and I'll do it in weekends, but the recovery should be available sometime, it shouldn't be hard to port that.
Oh yeah, look up stockwell's, dzo's and genokolar's github, they have done the device configuration. You can get much help from there. This weekend I'll propably test the build, I got otapackage command working now (it needed some things I can't write on mobile).
Sent from my U8800 using Tapatalk
Dear Community,
Please read the following before starting on reading on.After lots of requests I decided its time to provide every oncoming developer with a short guide on how to start developing for our beloved Mimmi (most stuff applies also for Robyn or other Android devices).
I'd also like to get a few words passed on what actually in most cases developing is, so let's start with the basics:
There is different ways of developing there is people like Cyanogen Mod which provide you with a bunch of changes to the original Android source code which enables new features, adds hardware support or make things easier for specific device developers. However these people at Cyanogen are often not fully recognized so please make sure to thank these people as well. Besides that there are ports of similiar devices which will not be explained in this tutorial but also these developers usually put a lot of effort into their roms however since the source is already compiled changes are usually of a cosmetic nature. In this tutorial however you will find the basics on how to compile kernel or android from source in order to build your own changes into your own rom, which btw would have never been possible without the developers porting xrecovery or cwm to our devices so please give these people a big thumbs up as well after reading on.
What do I need/Environment set up
Most people have issues on setting up a the heart of your Developer Carreer, the Environment. What I strongly advise is to have at least a bit knowledge of the main usuage of Linux Distributions and also programming languages. Without these you will most likely fail at one stage or another to make a successful build.
So lets evaluate what you need :
Linux Distro (i.e. any Ubuntu should do well)
a VM or native Linux
quite a bit of Linux skills and programing skills
Time and a high tolerance of frustration
Sufficent RAM (at least 4 GB, more is advised otherwise use native Linux)
If you know how to install a native Linux Distribution you can probably skip this part, I will explain how to use a VM to fill the basic needs and keep your development area seperated from you most likely otherwise needed productive platform.
The following Steps are just keywords, if you want to develop you will need to inform yourself how to achieve all this yourself, there's lots of tutorials out there.
Step 1: Download a VM and a Linux Distro
Step 2: Install VM Software (i.e. VirtualBox or VMWare Server)
Step 3: Install the Linux Distro in VM (you'll need at least 6 GB Swap and 50 GB or More HD space to have enough room for experiments/seperate syncs/etc...)
Step 4: Figure out if you installed 32 Bit or 64 Bit (you'll need this later)
Step 5: Boot your new VM based Linux Distro
Step 6: Set up a Share Mount between your host and your VM
Step 7: download the Android Source/Cyanogen Source of your desire (i.e. : repo http://**** -b gingerbread) into a folder for you desire (the folder should represent your ROM's/Kernel name)
Building a Kernel
Building a Kernel is one of the easier parts considering the full source code is available for download. Sony Erricson Open Source Dev Website is providing fully funtional Kernel sources usually in the tar.gz format. Download the source code and extract it, or if you use a git based repository clone or checkout the project into a folder of your desire.
The next step, is not mandatory but advised to sync the entire Android repo/CyanogenRepo as the repo also provides the Cross Compiler toolchain which is needed to compile for your device.
Once everything is finished downloading you should check the following path in the Android repo : platform/linux-x86(orx64)/prebuilt/toolchain/arm-eabi-4.4.3/bin/ this is the cross compiler we will use to build the kernel itself, its vital to have the compiler present, the version number maybe different though.
Lets start with the building process itself:
Code:
cd kernelfolder
cp arch/arm/configs/semc_mimmi_defconfig .config (the command maybe change to copy another default config file, it creates a file in the root of the kernel folder called ".config"
ARCH=arm make menuconfig (this will bring up the kernel configuration menu for arm devices)
In the Menu Config you can change/add features to the Kernel once you are done safe the kernel config. Now your Kernel is ready to be compiled:
Code:
ARCH=arm CROSS_COMPILE=/pathtoandroid_source/platform/linux-x86(x64)/prebuilt/toolchain/arm-eabi-4.4.3/bin/arm-eabi- make -j4
This will start a compile with 4 Jobs using the Architecture ARM and the Cross Compiler arm-eabi from the Android Source Repo. Once finished you'll find your Image in your kernel folder under arch/arm/boot/Image. Now you'll need to build your own ramdisk this is covered here at xda as well azuzu has also build a tool available to download.
Follow the instructions to create the kernel.sin which now can be flashed with Flashtool. Changes to Kernel source will now be available to your compiled Kernel. How to change the Kernel source is beyond this tutorial but programmers in C will have fun there.
Building Android from Source
Now lets get started with the more advanced part and the most frustrating part in the beginning. The easiest way to build for the mimmi would be to sync the Cyanogen Gingerbread source code. Which can be checked out using the repo binary (see tutorials on googles website also which packages for which architecture (x86 or x64) are addionally needed also the correct java version is important)
Now lets cut to the chase.
Code:
repo sync -u http://github.com/CyanogenMod/... -b gingerbread (or froyo or another branch you would like to check out)
once your repo is synced (you could also add "-j8" to enhance the speed of the repo command, it will take quite a while) you are almost ready to start. If you synced an AOSP source you will have the get your device and hardware libraries ready first. This means you will have to port i.e. the device project and hardware project (mimmi and msm7227-common folders from CM and also hardware folder from CM) to the AOSP source. It makes sense to port these to your AOSP source since they are the most complete so far. For Camera libraries you can sync from doixanhs repo the libcamera-5mp.
Now lets get a short overview over the Android source, it contains of various folders:
frameworks
device
vendor
hardware
platform
external
These are the most interesting, frameworks folder holds a bunch of android libraries and files which provide the functionality however often you will need to change a few things here and there since the mimmi is unique in its hardware. Everything you change will need to be approved with the following command:
Code:
make update-api
This will add all the functions, variables or anything else to the current-api.xml and ensure its available at build time.
The device folder holds device specific files, build-configs and so on. Lets look at some of the important files:
Code:
device/semc/mimmi/overlay/frameworks/base/res/res/values/config.xml/power.xml
The two xmls hold configurations of the build process which are device specific either LightSensorWarmupTime and so on the full list is in the root folder of frameworks/base/res/res/values/config.xml <-- any part you feel you need to change copy the lines from there and change in you device specific config.xml.
Now to another file:
Code:
device/semc/msm7227-common/BoardConfig.mk
This files olds the device sepecific configurations for the ARM, WLAN, etc.
Look at all the files in mimmi and msm7227-common and figure out what they do, google of course will guide you on that.
Also take a look in the:
Code:
vendor/cyanogen/products/
folder and find the mimmi config and get familiar with this as well. Nobody will be able to help unless you face specific issues. Developing is learning by doing and a lot of self teaching and the will to understand all of this yourself. We can't teach but you can learn. Specific questions however are usually proudly answered by most devs if they have already figured it out.
Lets start building now, first you'll need to get your lunch command to know which devices have makefiles (I always do it to be sure)
Code:
source build/envsetup.sh
This will now add all the known devices to your lunchcombo (the devices are usually definied in the vendorsetup.sh pointing to the makefiles)
Code:
lunch
Will get you the list of available devices and will wait for user input to select the device you want to build, choose the mimmi.
Code:
make -j4
This will start the building process with 4 jobs.
Now its time to get a coffee. Usually you will have a bunch of different issues on this part but the CM source is pretty good and you might be lucky there.
Now lets look at typicial errors:
Code:
symbol not found : means a variable in used in the code has not been defined, before its use this one is a tricky one
try to locate the source file and find the line the compiler is complaining about. Now check in the framework usually in
res/res/values or layout look for the type of the erros (String or array) and look in the corresponding xml if the variable
is present. Now look in vendor/cyanogen/overlay if your variable is also declared there and so on.
Code:
function not found/function of incompatible types : also a tricky one, you might sync a repo and made local changes to
a file and suddenly your functions another file calls are not present or have changed, find the differences between them and
think about how it has changed, maybe add the function again or maybe another function does the job now. you will need
to locate the changes compare them and you should be fine again
Code:
No Rule to make target: this one is usually due to a missing/incomplete Makefile you might need to add manually or
if you don't need it anyway the easiest would be to delete the not building folder
Once your source has finished compiling you will find you system image in:
Code:
out/products/mimmi/system/
As of now unfortunately its still missing a few files here and there. Compare ROMs and Compare what might needs to be added. However I advise not switch libraries around its best to use your own libraries. However sometimes you will face issues when doing this so start with the files created there and just add the recovery and ramdisk to your rom. Now observe via adb if everything is running. This will take time and add one missing lib after another one and reboot, after each (like grallocs or librils or fm libs and so). This is basically a debugging part of the job.
You will now add one by one more functionality, but keep in mind to use logcat to see what goes wrong, maybe some stuff can be changed in the source rather then randomly adding stuff.
also this one just in case.
Hey there c: As always, you come surprising everyone with your stuff haha Good job on this one, I think it is always good to have some tutorials from the people who build specifically for our Mimmi's
Before reading this, I wanted to get started on developing and I went to Android's official developers site, I did some steps, now I have the complete source of Android here (I use Ubuntu 10.04, the LTS version... Dunno if telling you that it is LTS ver. really matters, but just in case) andthe whole environment ready to build. Now, reading at this, I realize I don't have 4Gb of RAM on this "old" (2007..) notebook. Anyways, the thing is: I followed the steps listed here, but when I wrote this command-
Code:
$ make -j4
-the terminal started to execute files, or something... I'll add a screenshot at the end about this. It has been 3 days since that, and the terminal is still doing the same. I know developing requires a lot of patience, but... 3 days? Is this normal?? I have looked through the Internet for problems with this command, but no one seems to have talked about it.
Thanks for your time, work and effort for the community, we really appreciate it c: Bye!
Link to the Screenshot:
http://i259.photobucket.com/albums/hh313/link_4ever/Screenshot.png
The 'make -j4' uses 4 threads to compile everything, if your notebook does not have at least an hyperthreading-technology enabled CPU, well, that's to expect when building an entire OS, plus you don't have sufficient RAM, I do have 2GB and a DualCore CPU and it takes at least 1 hour to compile an average desktop kernel with that same command. I have not tried to compile android, but I think that it will take at least 4 hours to compile everything. Just my thought.
RozenTensai said:
The 'make -j4' uses 4 threads to compile everything, if your notebook does not have at least an hyperthreading-technology enabled CPU, well, that's to expect when building an entire OS, plus you don't have sufficient RAM, I do have 2GB and a DualCore CPU and it takes at least 1 hour to compile an average desktop kernel with that same command. I have not tried to compile android, but I think that it will take at least 4 hours to compile everything. Just my thought.
Click to expand...
Click to collapse
Thank you for your answer! Just ten minutes ago, the 'make' command finished ! And about my notebook, it is just like yours: 2Gb RAM and Dual-Core CPU, I'm not sure but I think it runs at 2,8 GHz. And also, like I said earlier, I know developing takes time. I know how slow processes can be, in fact, there were commands previously that took 1 hour or more to finish their tasks. 1 hour, 4 hours, it's ok but... 3 days? Isn't it a bit too much xd?? Now I'm afraid to turn off the computer because I don't want to compile that thing again hahaha
the "-j" option depends on the number of (virtual) cores you have.
get the number:
Code:
grep processor /proc/cpuinfo | wc -l
if you have native linux and like to work on the machine I recommend do lower the number at least -1 otherwise get a coffee and keep hands off the build process
b
make -j4, lol. Many people do not have. 4 cores on the processor
paul-xxx said:
make -j4, lol. Many people do not have. 4 cores on the processor
Click to expand...
Click to collapse
This parameter refers to threads instead of hardware cores
Sp4rrow said:
This parameter refers to threads instead of hardware cores
Click to expand...
Click to collapse
ok. probably a mistake. but still. I always use 2. it brought to me the best results
I use j6
And also j refers to jobs everybody may change to what they want. For kernel i build with j12.
If you know better like it seems you always do write it down.
Sent from my U20i using xda premium
I can't find any 2.1.1.A.0.6 Sources. Link to the sources you use slade?
http://developer.sonyericsson.com/cws/devworld/search-downloads/opensource?cc=gb&lc=en
should be:
x10_x10mini_X10minipro_x8_eclair_2.1.A.0.435.tar.gz
Stock Kernel with only CWM5 installed...
Slade i want some help from you. how can i embed CWM5 in the stock kernel without any other changes to it??
i want a stock kernel with nothing changed in it only CWM5 installed in it. how this can be done???
i forgot to say the most important thing!: Thank you very much for your work and effort Slade
I just came to the configuration menu of the kernel. i see there are options predefined for the mimmi, but how can i optimize it more, there are soooo many options, and to tell the truth i don't have a clue what they do
So LG released build 10j, with accompanying kernel source for the 10j update.
However, their source includes a lot of "typos" and silly little mishaps and doesn't compile.
Things that had to be fixed (note, not every file type mentioned were fixed, just specific ones) :
Makefile(s)
Kconfig(s)
.c sources
.h headers
The package I am providing stems from @jcadduono initial release (found here). I then replaced all files from the 10j source from LG (found here).
I then compiled with one thread and went error by error. Yes, it took me much longer than it should have, but I've never done anything like this, and the longest part was actually learning on how to figure out what was causing issues. I suppose in the future, it will be much faster for me.
Anyway, it flashes fine, here it is.
No changes to the defconfig, nor was anything customized inside (just fixed). It is stock, and builds Image.lz4 as well as the accompanying modules. This is all thanks to @jcadduono 's beautiful build.sh script, as well as his menuconfig.sh.
To build :
set toolchain in menuconfig.sh as well as build.sh
cd /path_to_dir
./menuconfig (do your changes, exit, follow prompts to save changes)
./build.sh h918
You want /path_to_dir/build/lib/modules and /path_to_dir/build/arch/arm64/boot
Save those things before running menuconfig and/or build.sh again, as they are automatically cleaned per config or build.
Remember you still have to disable verity, and force-encrypt.
Also, here is a full stock, flashable 10j boot.img (with kernel built from source packed inside), with verity and force-encrypt disabled. Also, it flashes the newly-compiled modules, as well as SuperSU2.79-SR3. Stock RAMdisk used as well.
When you do end up customizing the kernel, will you be putting that out as a stand alone custom kernel?
Thanks for all the hard work. Take a week off.
Cheers!
Update
Hey @Tilde88 seems the dreaded no sound on call after switching from wifi calling to data call is active again
I also have another branch going here: https://github.com/jcadduono/android_kernel_lge_msm8996/commits/android-7.0_2
which is 10j with LG's stuff separated from other commits.
I can't seem to figure out why it doesn't want to boot though. For whatever odd reason, seems the bootloader isn't even reading the Image.lz4-dtb and going straight to blank screen -> power off. Makes it darn hard to investigate when you can't get a pstore.
Update: I just realized that lz4 binary changed so all I had to do was change -lz16 to -lz9
Update 2: Nope still doesn't boot, I'm outta ideas.
jcadduono said:
I also have another branch going here: https://github.com/jcadduono/android_kernel_lge_msm8996/commits/android-7.0_2
which is 10j with LG's stuff separated from other commits.
I can't seem to figure out why it doesn't want to boot though. For whatever odd reason, seems the bootloader isn't even reading the Image.lz4-dtb and going straight to blank screen -> power off. Makes it darn hard to investigate when you can't get a pstore.
Update: I just realized that lz4 binary changed so all I had to do was change -lz16 to -lz9
Update 2: Nope still doesn't boot, I'm outta ideas.
Click to expand...
Click to collapse
Is that for 10j? From the H918 source, the Kconfig and Makefile for the DTB image were broken. It would automatically remove the lines from defconfig anytime you did a menuconfig. I'm sure you already picked up on that though
Other than that, I have nothing to offer... I am no expert like yourself
kelvin216 said:
Hey @Tilde88 seems the dreaded no sound on call after switching from wifi calling to data call is active again
Click to expand...
Click to collapse
I'm still on 10d with my 5.5 rom+kernel. Going to make a v6 test rom+kernel and try it out live tomorrow.
I used 5.5 with VoLTE and WiFi calling in the last few days... But I have gotten no issues, even though I'm actually trying to get them to occur.
I was actually in a building for some time with 0.0% radio signal. So I hopped on wifi, and made my calls to the office that way.
When I left the building, WiFi disconnected due to range, 4G came up and I called my office, no issue at all.
When you say "again", do you mean it is occurring again as it once did, or as it recently has? (On what kernel are you having this issue - NSS 5.5 for H918 is fully stable). Other than a few people having high CPU usage (which I also can't replicate), there are no issues on the 5.5 kernel. I suspect the CPU usage thing to be due to me enabling C-States blindly in defconfig; but that has nothing to do with what we are on about.
Thanks for the info.
10j
Hey @Tilde88 it happen it on your new 10j kernal while i was testing didnt have any high Cpu or overheating issue with kernal, just on calls when switching from wifi calling to data, calls can be made and receive but no one can hear me unless i reboot phone and then everything is fine till the switch again from wifi calling and data and vice versa, glad i can help, will get a log when it happens again but the kernal is great for my needs on a 10j base rom
So no ones working on h918 kernel for 10j?
lightninbug said:
So no ones working on h918 kernel for 10j?
Click to expand...
Click to collapse
It's fine the way it is imo. Just get root and tare apart the bloats
Sent from my zeroltetmo using XDA Labs
twidledee said:
It's fine the way it is imo. Just get root and tare apart the bloats
Click to expand...
Click to collapse
That comes NO WHERE close to comparing to tweaks at a kernel level.
Tilde88 said:
Is that for 10j? From the H918 source, the Kconfig and Makefile for the DTB image were broken. It would automatically remove the lines from defconfig anytime you did a menuconfig. I'm sure you already picked up on that though
Other than that, I have nothing to offer... I am no expert like yourself
Click to expand...
Click to collapse
what tools do you guys recommend? Im was going to do some things with my own in regards to ovrclocking and anything else the tools i found on the app store.
I've already downloaded tje files and im going to work it. So if you wouldn't mind suggesting some tools I can go from there. I did some scripting and coding a ling time ago and couriered for several eu topsides in the well. I dual booted NT pro server and Red Hat early a 90s. I cam put together a Lan and maintain the integrity of the network locally or remotely. When ICQ was just a bunch of rooms where allot of hoxor groups tested each others skills. I was good enough track a dos attacker through telnet and a few other scripts that I and And another put together just for such occasion- through 6 proxies...
then i became a truck driver. Got married and had kids.
Kids all grown now... I want to play with some old toys.
twidledee said:
what tools do you guys recommend? Im was going to do some things with my own in regards to ovrclocking and anything else the tools i found on the app store.
I've already downloaded tje files and im going to work it. So if you wouldn't mind suggesting some tools I can go from there. I did some scripting and coding a ling time ago and couriered for several eu topsides in the well. I dual booted NT pro server and Red Hat early a 90s. I cam put together a Lan and maintain the integrity of the network locally or remotely. When ICQ was just a bunch of rooms where allot of hoxor groups tested each others skills. I was good enough track a dos attacker through telnet and a few other scripts that I and And another put together just for such occasion- through 6 proxies...
then i became a truck driver. Got married and had kids.
Kids all grown now... I want to play with some old toys.
Click to expand...
Click to collapse
The only tool you will need on top of this source, is a cross compiler.
There are a few to choose from, but mainly, you might want to use Linaro.
This is the version I use gcc-linaro-6.2.1-2016.11-x86_64_aarch64-linux-gnu.
Once you have that, set it's path within the 2 files build.sh and menuconfig.sh.
Next step is to do ./menuconfig , do your changes, then do ./build.sh h918
To add features, you have to add source files (.c and .h files, and reference them accordingly in their respective Makefile and Kconfig files.
Thanks to @jcadduono for the realest build scripts. build.sh and menuconfig.sh are epic.
Tilde88 said:
The only tool you will need on top of this source, is a cross compiler.
There are a few to choose from, but mainly, you might want to use Linaro.
This is the version I use gcc-linaro-6.2.1-2016.11-x86_64_aarch64-linux-gnu.
Once you have that, set it's path within the 2 files build.sh and menuconfig.sh.
Next step is to do ./menuconfig , do your changes, then do ./build.sh h918
To add features, you have to add source files (.c and .h files, and reference them accordingly in their respective Makefile and Kconfig files.
Thanks to @jcadduono for the realest build scripts. build.sh and menuconfig.sh are epic.
Click to expand...
Click to collapse
Hi.
The boot file you linked. I decompressed it and itt produced many double copies. I assume that I have originals + a copy (1) some are identical in size others not so.... What do I do?
twidledee said:
Hi.
The boot file you linked. I decompressed it and itt produced many double copies. I assume that I have originals + a copy (1) some are identical in size others not so.... What do I do?
Click to expand...
Click to collapse
None of the words you just said make sense.
What are you trying to do, and with what.
Be precise.
If what you did was get the boot.img file and decompressed it, you exposed the RAMdisk. This will not help you in any way. This is also not the way in which you create a kernel. boot.img contains the kernel (zImage).
?
Tilde88 said:
None of the words you just said make sense.
What are you trying to do, and with what.
Be precise.
If what you did was get the boot.img file and decompressed it, you exposed the RAMdisk. This will not help you in any way. This is also not the way in which you create a kernel. boot.img contains the kernel (zImage).
?
Click to expand...
Click to collapse
It's my first time. I wanted to see what the package consisted of outside of the tar.zip so I unpacked it. As it was unpacking it was periodically halting due to an existing file already there. So I wasn't sure what to do so I let it rename. I wanted to see what the duplicate file was.
I'm not at the desk at the moment but when i looked at replicas the few I read were Readme and Linux guides.
As far as I can tell they weren't crucial files. I was just curious what made that happen since I haven't seen that with other packages. Then again I haven't embarked on this sort of project before either.
I hope that makes some sense.
Sent from my zeroltetmo using XDA Labs
Bump
twidledee said:
Bump
Click to expand...
Click to collapse
You are doing it wrong.
twidledee said:
It's my first time. I wanted to see what the package consisted of outside of the tar.zip so I unpacked it. As it was unpacking it was periodically halting due to an existing file already there. So I wasn't sure what to do so I let it rename. I wanted to see what the duplicate file was.
I'm not at the desk at the moment but when i looked at replicas the few I read were Readme and Linux guides.
As far as I can tell they weren't crucial files. I was just curious what made that happen since I haven't seen that with other packages. Then again I haven't embarked on this sort of project before either.
I hope that makes some sense.
Sent from my zeroltetmo using XDA Labs
Click to expand...
Click to collapse
Did you ever figure it out?
Not sure which you are using, the source, or the compiled boot.img.
If you want to make a custom kernel, I am more than happy to help. When extracting the source, or anything really, you will not get those errors, unless you already have files/folders that match identically to the structure in which you are extracting to... That would mean that you can have the same folder twice within a compressed file, which, you can't.
So, take the tarball, extract it (I just did it myself right now, there are no duplicates --because impossible), modify menuconfig.sh and build.sh to point them to your cross compiler (i recommend Linaro 6.1.1 for aarch64).
Now, within the source, you WILL find multiple files that are named the same, but they are in different locations, and contain different lines of code (almost usually). But these are NOT to be de-duped. Extract and use as-is.
Once you have set your toolchain in the 2 .sh files that jcadduono has made (and are awesome as can be), open up a terminal (i really hope you are on a Linux environment by this point, because if not, none of the steps in this paragraph will work ). Do not use root, just plain old userspace. Once in the terminal, cd to your source directory.
Type ./menuconfig.sh and hit enter.
Make your edits, save the file, and confirm you want to save.
Now you are back in your terminal session.
Type ./build.sh h918
Wait or watch as it compiles.
When it finishes, you will need 2 things. The kernel (found in your /sourcefolder/build/arch/arm64/boot directory), and the modules (found in your /sourcefolder/build/lib/modules/yourkernelname/kernel. This directory will be wiped the next time you do menuconfig or build, so get your files now. There will be like 20ish or so modules, and they have the .ko extension. Search the folder, and copy all these modules to a new folder, along with your zImage (file called Image.lz4-dtb).
You can either flash the zImage , or pack it into a boot.img with an existing RAMdisk, and flash the boot.img.
Also, all the modules you just compiled, need to go in your ROM. So when you make the flashable zip, make it delete /system/lib/modules, and then extract the new /modules dir into /system/lib.
Congrats, you just compiled your first custom kernel.
Hello
I thank you and @jcadduono for doing this.
Though I myself am not a developer, I will be getting this phone soon and I appreciate the activity on XDA that could potentially make it more fun to own this LG device.
I do know some basic Linux stuff, and I have compiled a few kernels with success so maybe I'll look into it someday, but hopefully there will be many veteran Linux hackers doing it instead the results would be better I think.
Btw, I looked on lg opensource site and found this: "LGH918_Android_Nougat_v10n.zip" I have not seen it mentioned anywhere in the forums yet, it must be very new.
askermk2000 said:
Btw, I looked on lg opensource site and found this: "LGH918_Android_Nougat_v10n.zip" I have not seen it mentioned anywhere in the forums yet, it must be very new.
Click to expand...
Click to collapse
https://forum.xda-developers.com/v20/how-to/h918-10k-kernel-source-potential-10n-t3631920
Plus @Mentalmuso has released a kernel using the 10N source.