[W-Project] Root/Non-Root for your Walton Primo (C2 & All Models) - Android

:::[W-Project]:::​
Root Your Walton Primo C2 (Also for Any Walton Primo Handset)​
Hi.....everybody to my [W-Project]!!!
How is going on with your Walton Primo Handset?? Ofcourse good!!!
I wanna bring you the freedom of tasting Android by rooting your smartphone! Are you ready??? I think you are.
Don't you know what the rooting is??? Then, I think You can check out this:
(Guide) (Beginners) You have rooted your phone, now what can you do
Lets start:::
Method:::R&R(Root & Reverse Root)​
:::Advantages:::​
1. You can root your handset.
2. You can reverse root that means non-root your handset!!!
:::Required Files:::​
Download Walton E-Root v1.3.5(11MB)​
Download USB Drivers(9MB)
:::Lets get ROOTED:::​
1. Pick your handset. Go to Settings>>About Phone>>Build Number. Tap 5/7 times on build
number. Congrates!!! Now, you are a developer.
2. Come back from About Phone section, Now you will see a new section on Settings that is Developer Options. Go to Developer options. Turn
on this feature. Check USB Debugging & Allow mock locations.
3. In your PC, extract the Driver.zip file and install it. (This driver package only for Primo C2)
4. Now, connect your phone with PC via USB cable.
5. Open Walton Eroot software on your PC. You will see some chinese language. No need to get worried!!!
6. It will search your Phone. When, you will see that it is showing just 1 option for rooting your handset, click root button.
7. After sometime, it will root your phone by 4 step. When, all is done, you will see 4 step green marked and 2
options.
8. Disconnect your phone and check SuperUser application on your handset. Ofcourse, you have found it!!! Thats it. Now you are
successfully rooted.
:::Furthermore:::​
If you face any problem, email me at: [email protected]
If it helps you, do not forget to hit thanks button!!!:good:
[email protected]!b​
ScreenShots​
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

primo v1 er driver kothay pabo??

Download it
siamm0088 said:
primo v1 er driver kothay pabo??
Click to expand...
Click to collapse
https
://drive.
google.
com/
uc?
id=0B_
nouTN5y1w7
VEtJb0FX
YVZncWc
সম্পুর্ণ কপি করে একসাথে জোড়া লাগিয়ে ব্রাইজারে পেস্ট করেন।

3 ta tick ashar por mobile restart hoy kintu root hoy na.

New Method
siamm0088 said:
3 ta tick ashar por mobile restart hoy kintu root hoy na.
Click to expand...
Click to collapse
Download vroot from Google.
Install it on ur pc.
Then connect ur device via usb cable.
Click root and u will b rooted!!

Related

Root won't work

I'm trying to root my Sony Xperia P with the standard manual from Sony.
But when I'm trying to reboot the phone I see a new device "S1Boot Fastboot" in the device manager in Windows 7 x64, but after a few second the device is disapeard and the phone boots normal. Is there a way to do this with an application instead of using the Android SDK?
Why this on development section? Go to Q&A section
dude you need drivers, you need Android SDK, than Gordons Gate Flash Drivers, Sony Update Service, and Flash Drivers from the flash tool
From the Sony page you need the latest Android SDK a custom android_winusb.inf file from Sony to enable Fastboot for this phone and Google USB Driver package revision 4 or higher. I've got al these components installed on my machine.
this can be a simple driver issue, install drives manually
go to Computer, and go to Manage
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
check out the side bar and click on Device Manager
now search for S1 FASTBOOT [the name of the drive(maybe it is on ''other'' tab)]
and do it fast before the device turn off fastboot mode
right click on it and go to Update Software
click on the second option
put the folder where is the usbs drivers
click on next, and install the driver, and now you have the fastboot drives already installed, now you just need to unlock bootloader from that tutorial by sony, and please, hit thanks if you think i helped you, and sorry for that bad english, i am brazilian
I helped you? Please, click on ''Thanks'' button
Thread belongs in Q&A
install the drivers manually dude...
Hi, so I flashed Advanced Stock ICS Kernel on my Xperia S, but my phone isn't rooted, or isn't giving root access to any apps. It was rooted for a while, but for some reason, it's no longer rooted...
Can anyone help?
Update superuser in the play store
Sent from my LT26i using Tapatalk 2
AnrgKrshn said:
Hi, so I flashed Advanced Stock ICS Kernel on my Xperia S, but my phone isn't rooted, or isn't giving root access to any apps. It was rooted for a while, but for some reason, it's no longer rooted...
Can anyone help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1856287
It sorted itself out, but thanks for your attention, guys

[ROOT] Omate Truesmart

Hi! I just want to show how quick and easy you can Root your Omate TrueSmart Smartwatch.
First you will need this software MTK Droid Root & Tools v2.5.1
1. Run the software MTK Droid Root & Tools v2.5.1.exe. It will extract the program files to one folder.
2. Open extracted folder and execute MTKdroidTools.exe.
3. Connect your Omate Smartwatch to the USB on your computer (do not forget enable USB Debugging in developer options)
4. You should see now something like picture below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5.Go to the TAB root, backup, recovery
6.Click button SuperUser and choose superuser app to install ( SuperSU or SuperUser)
7.Your done! Congratulations you just ROOT your Omate TrueSmart
If something going wrong then check your Device Manager and ADB drivers!
marcars said:
Hi! I just want to show how quick and easy you can Root your Omate TrueSmart Smartwatch.
First you will need this software MTK Droid Root & Tools v2.5.1
1. Run the software MTK Droid Root & Tools v2.5.1.exe. It will extract the program files to one folder.
2. Open extracted folder and execute MTKdroidTools.exe.
3. Connect your Omate Smartwatch to the USB on your computer (do not forget enable USB Debugging in developer options)
4. You should see now something like picture below
5.Go to the TAB root, backup, recovery
6.Click button SuperUser and choose superuser app to install ( SuperSU or SuperUser)
7.Your done! Congratulations you just ROOT your Omate TrueSmart
If something going wrong then check your Device Manager and ADB drivers!
Click to expand...
Click to collapse
MTKTools is not recommended but thanks for posting it.
I wouldn't root it this way, but that's just me.
Why wouldn't you guys do it this way?
What would be a better way?
I'd either use motochopper or a modified version (Loki's mod).
Sent from my GT-P5110 using Tapatalk 2
If you guys want, I'll go ahead with my 1-click root using motochopper. And it'll be in all english. Lol
i have take my root permission with framaroot !
Framaroot worked perfectly for me!
deedscreen said:
Framaroot worked perfectly for me!
Click to expand...
Click to collapse
Glad it worked. It could not get it to work on all the x201 firmwares. The worst result resulted in a flash to stock firmware.

How to ROOT CHD (Easy simple and the best way)

HOW TO ROOT
(ONE CLICK ROOT)
1) Download the files which i have uploaded
2) After downloading extract the file Mobistel cynus T1 drivers and install the driver from that folder...!!
3) download MOTOCHOPPER and extract it, and u ll b able to c RUN.BAT file
4) Enable USB debugging from the developer options. Then Connect the phone to PC via USB cable and run the motochopper (RUN.BAT file). Now this will detect your device and the tool roots your phone if ur device is not detected, then make sure that drivers are installed properly.
5) If evrything goes well then phone will automatically reboot, and u r done.
6) To check whether u r rooted o not after reboot u can check in ur phone there will b a SUPERUSER app installed in ur phone, or else download root checker app from Play store and check the status.
NOW go ahead and install CWM
1) for this u need to download MOBILE UNCLE TOOLS from playstore or from the attachments.
2) Download recovery.img from the attachments.
3) After downloading put the recovery.img file in the root of ur sd card.
4) Run MOBILE UNCLE TOOL app in ur phone and grant SU permission and then click on RECOVERY UPDATE option, after clicking u will b able to see the "recovery-CWM6.0.4.4-a116.img" file there....click on that click OK and it will ask whether to reboot to RECOVERY MODE...click OK and then u r done..
HOPE SO IT HELPED SOMEONE
PRESS THANKS IF MY POST HELPED U :laugh:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Root any of your Android Phones , HITECH Phone ,CELKON ,CHERRY, MICROMAX using vROOT

Vroot is an one-key root tool designed by Mgyun-team. Just click one button, you can root your mobile device immediately! :fingers-crossed:
It is very easy to use . :good: Turn on the USB debugging mode, and connect your phone to the computer, then click the button "root" and now what you have to do is just waiting for the root result. Forget the complex and troublesome tutorials, everyone can control it easily.
Vroot's goal is providing the excellent and simplest experience for all android users. The newest version of Vroot have supported for more than 8000 kinds of Android devices. It is more effective, easier and faster than you can imagine.
In order to serve non-chinese user , we are pleasure to release this English version for downloading . :victory: If you are a non-Chinese user, just download the English version of the Vroot and enjoy the root now.
Vroot is a Chinese app and Dont worry about it
Step 1: Enable USB Debugging on your Android Smartphone.
(To enable USB debugging Goto Settings > Developers Option > USB Debugging > Tick to Enable) :highfive:
Step 2 : Download VROOT from Here or http://www.mgyun.com/en/GetVRoot and download Adb drivers http://adbdriver.com/ Connect Your Phone then Install In In Your Pc adV Driver :silly:
Step 3: Install Vroot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 4: Open Vroot and Connect Your Phone Or Wait for the Application to install the Driver :highfive:
Step 5 : Click Root
​
Now you will be successfully rooted :good::good::good::highfive::highfive: :fingers-crossed::fingers-crossed::fingers-crossed:
:fingers-crossed: :victory:♥☺TESTED BY ME ☺♥:victory::fingers-crossed:
Download and Install Superuser from Google play store since the App given in this root is Chinese.
Warning : Dont Copy This Post :angel:
If you like this! :good:
pls ... like this!!!
Click In Thanks Option :good:
I worth it
​

Blu life one x

I bricked my Blu life one x and I want to repair it can someone help me out ow to do it and where I can't find the Blu life one x rom?
Download this:
https://www.androidfilehost.com/?fid=24391638059058964
From user @Bad_MOFO_33
Then download the SPFlash tool from here:
http://spflashtool.com/
Then be sure to have usb drivers installed so the COM identifies your phone.
Open the ROM you downladed and extract the carpet into desktop or somewhere you can easily find it.
Open SPFlashtool and go to the DOWNLOAD window and select Scatter-loading and select the scatter file from the folder where the ROM is like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then with the phone turned off (surely is off since its bricked) click the DOWNLOAD button on the spflashtool
And then AFTER you clicked DOWNLOAD on SPFLASHTOOL connect the phone while holding the VOLUME UP and is should identify it and begin the process.
DONT disconect until its done and a BIG GREEN CHECK mark appears, then just unplug and power it on.
ANd thats it
-------------------------------------------
Sorry i dont know why the image is not loading but hopefully the instructions will guide you
Thanks I'm going to try it tomorrow.
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
azazsxsxdcdcfvfv said:
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
Click to expand...
Click to collapse
Might need to repair your IMEI
Follow this guide:
http://sheershbansl.blogspot.mx/2014/08/how-to-fix-invalid-imei-3-methods.html
NOTES:
1.- you IMEI numbers are on the battery sticker theres 2 of em one for sim 1 and the other for sim2
2.-when entering the imei where it say to type AT+ etc etc on our BLU you need to type AT (SPACE) + and the rest, so it looks like AT + and then all the rest (EGMR=1,7,"1234567890")
3.- remember to SET Command and then reset so the IMEI settles in.
Hope thats the problem solver
Thanks for all guys that helped me... The sim problem was my fault cause I messed around with the bands. Like north America and world bands...

Categories

Resources