[Q] Old HTC Desire as Spotify Connect device - Android Q&A, Help & Troubleshooting

I had an old (but much loved) HTC Desire in a drawer at home and thought I'd try let it serve as a Spotify Connect device attached to my Hifi. With the new Spotify Connect feature you can remotely connect to and control another device on your network to play music - perfect for me - without needing to buy a pricey new receiver with the feature built in!
It works remarkably well, much better than DLNA from my HTC One, with one caveat: after a period of inactivity it no longer shows up in the list of Connect devices in Spotify and I need to physically switch the screen on and select the Spotify app from the task list.
It's running CM 7.1 and turned Wifi power saving off in Wifi advanced settings.
Any idea what else I could do to force it out of any power saving mode, seeing as it's connected to mains at all times?

*bump....

I plan to do this exact same thing when I finally get spotify connect (phased rollout is so annoying)
are you leaving the screen on?
andysor said:
*bump....
Click to expand...
Click to collapse

Related

[Q] Bluetooth auto connect

I can't see any option anywhere in my SGS2 to set a BT paired device as "authorized". Every time I enter in my car I've to manually select the BT device and start manually the connection.
I searched in the forum but didn't find answers.
I also tried to look at the filesystem and I found auto_pairing.conf file in which there are a lot of BT manufacturer brands listed in sections like "black list", "white list", .... Is it possible I need to manually modify this file to include my BT manufacturer in the white list section? It sounds really strange!
Is there any other way?
I'd love to know that as well.
I atlculay lvoe my sumnasg glxaay s2 wtih VliaRionlm mroe tahn my xobx
Update
I manually modified auto_pairing.conf file adding my car BT manufacturer without any success (I added it in white list with the name already mentioned in the file, so I think that's not a problem of brand name).
My SGS2 continue to ask me to manually select the device to connect to, even if only one BT device is available (car handsfree).
I have the same problem, which i didn't have with my Nexus One running Cynogenmod ROM. I keep my Bluetooth on all the time or most of the time and i would like (like i had in nexus one) when i turn on my car (with Sony MEX-BT3700U car stereo with Bluetooth) that the phone auto-connects with the stereo in a minute or less (or with my plantronics headset when i turn it on), but no, every time i have to go into bluetooth settings and connect on the paired device and then it's connected.
I heard about few application that could help but it would be nice to have it as native function on the phone. I haven't tried these apps yet but if anyone want's to try they can be downloaded from the market, firs is free, the second is not.
https://market.android.com/details?id=a2dp.Vol&feature=search_result
https://market.android.com/details?id=com.btautoconnect&feature=search_result
If anyone can help it would be greatly appreciated
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
mudferret said:
I don't have this problem at all, on any ROM I've tried stock or not. Is your stereo also set up to auto-connect? And is it your phone or your stereo that's refusing the auto connection?
Click to expand...
Click to collapse
Stereo doesn't have any options, same as Plantronics headset (only ON or OFF), that means that with my old nexus one running CM (or Nokia n95 8GB) when the bluetooth is switched ON and i come near stereo or headset they connect automatically in about 30 seconds max, with my SGS 2 that doesn't happen, i tried everything but it wont auto-connect until i initiate the connection from phone manually.
I have to resolve this because it's killing me !
jartukovic said:
Stereo doesn't have any options
Click to expand...
Click to collapse
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Mine auto connects to my JVC car head unit, but doesn't to my Belkin Tunestage. No idea why. As it happens, this suits me but it'd be nice to be able to control it.
And the commute begins. The auto connection is an option on my JVC deck, no such option on the phone.
Sent from my GT-I9100 using XDA App
mudferret said:
I wonder if that's the issue; IIRC it's my stereo that I've told to connect automatically rather than my phone. I'll verify on my commute home today.
Click to expand...
Click to collapse
The stereo is recognized same as Plantronics and that is as a head set, but it doesn't want to automatically connect to either of them, every time i have to initiate the connection. There is one way to connect it (partially automatically ) but that's not the solution - i have to turn on the bluetooth on my phone before starting my car, then when phone is in searching mode if the car is started (stereo turned on) then it will connect automatically, if the search mode (that is active for a short time after turning the bluetooth) ended before i start the car (for instance if i keep my bluetooth on all the time on my phone) then it wont connect automatically.
Am i any clearer about my problem ?
I hear what you're saying but it appears that auto connection is initiated by my stereo. If I turn auto connect off on my stereo there is no connection until I tell my phone to connect. I don't see anything on the gsii settings to have the phone auto initiate the connection. I have a recent JVC deck fwiw.
Sent from my GT-I9100 using XDA App
I will check one more time is there any bluetooth settings on my car stereo, but i'm 90% sure that it doesn't have, because this is the first phone that doesn't connect automatically.
I have had similar issues with mine, it will pair with my Kenwood DNX520VBT but wont auto connect.
however i now have a workaround
Turn bluetooth on your GS2 first, then turn on you Radio. once my Radio boots up it initiates the connection and auto connect works.
if i turn on the bluetooth on my GS2 after my radio it never works.
ive got a sony bt3700 stereo, it connected perfectly with my samsung wave, i just upgraded to a galaxy s and i have to do it manually every time so its not the stereo.
Same thing happened to me, old nexus one with CM7 is connecting ok but i have to connect SGS2 manually or make sure that my bluetooth is ON on my phone before i start the car.
I may have the answer......
Hi,
I have a sort of work around.
My Pioneer head unit refuses to auto connect to my SGS2 and I have to do it manually (I connect from the radio in 4 clicks but thats not the point). This was driving me nuts as previous handsets I owned connected within 5 seconds of being in the car.
I then discovered ROMS and went for the Criskelo ROM and it put me on Android Version 2.3.6 (Not sure if that made a difference or its actually the ROM).
Now with that sorted I found that I have an extra function in my bluetooth settings. When I make the device visible I can then choose the visible time-out length. If I set this to NEVER then I have no problems connecting to the headunit everytime I get in my car.
The only problem I have with this is that I pop my phone into Airplane Mode each night and because that disables the bluetooth it loses the time-out setting so I have to put the time-out back to never each morning.
With setting the time-out to never I'm not sure what battery drain is like because I'm constantly on my phone and my battery depletes rapidly anyway but it seems like a fix for now.
I hope this makes sense and helps people out until a proper fix becomes available.
Cheers,
DJ Sploits
Hi All,
Sorry for bumping an old-ish thread, but it seemed the most appropriate thread, and better than creating a new one of the same topic!
This is what I believe to be true:
*IF* Bluetooth is enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will auto-connect to the GS2
*IF* Bluetooth is NOT enabled on the GS2 (and the phone has previously been paired with the car headunit) then when the car is turned on, it will NOT connect to the GS2 (understandably!).
*IF* the phone has previously been paired with the car headunit, and the bluetooth on the GS2 is enabled *AFTER* the car has been started, it does NOT Auto-Connect.
From this, I assume that when the car is powered on, it searches for previously paired handsets in order of most recently connected first. If it finds one, then it WILL connect.
Now:
If I leave Bluetooth enabled on my phone, the battery is significantly depleted my mid-afternoon.
I've started using an app which uses the "rough location" (not GPS) to monitor where the phone is located. If it deemed to have moved in X period of time, then it enables bluetooth.
This is great, and works a charm ... BUT it does mean that bluetooth stack on the GS2 is enabled AFTER the car has been moving for a period of time, and thus does NOT auto-connect.
What I've been searching for is:
"When BT stack is enabled on GS2, can it look for previously paired devices and initiate the connection itself?" (Rather than the car connecting to it?) Is there a script or app to do this?
Hi WTFH,
I think it might be more headunit specific. I always have my bluetooth on but it wont connect automatically to my headunit unless I have it set to constantly discoverable (on the handset).
I also use a power saving program called Green Power Premium which will cut bluetooth/data/wifi after a certain amount of time when the phone is in a sleep state. Its great fro saving power as my phone isnt constantly looking for a wifi signal (I don';t use it to control my bluetooth though as I need it on for my car).
Hey DJ_sploits,
Thanks for that ... Yes, I understand that some headsets do not auto-connect to the GS2 if the phone is NOT visible.
But what does seem to be constant is that the GS2 will not auto-connect to any of the headsets if the bluetooth stack on the GS2 is enabled AFTER the headset has come online and available.
One workaround I'm thinking of is:
Enabling a profile which says "When connected to a power source (I'll have to use the power adaptor) then enable bluetooth". Connecting my phone to the power first before starting the car should enable the BT stack before the headset tries to connect.
In fact I could extend this to say "Only enable bluetooth when using power adaptor, and not connected to wifi".
It's still a pain to do this though, as I tend to just jump into the car and don't want to faff about with connecting this and that.
The only other work around I use is to set the visiblity to constant (depending on what android software version you are on). My headunit always picks the phone up if I have it setup like this. the only thing with that is it will eat the battery even more (which is annoying considering there are other phones out there that constantly have their bluetooth on and you never see the battery getting hammered).
The only flaw I can see in your method is the fact you need a power source to knock on the bluetooth. Great for powersaving but it would then mean you would have to remember to connect it to a car charger everytime you got in the car (not too bad if you have it constantly plugged in to the cigarette lighter) and as you set this can be a bit of a faff.
The only way I can see in sorting this is using a power saving app but having your visibilty constantly on for the bluetooth and then we just hope it doesnt eat the battery too much (not to bad for me as I have a charger at work but could be a pain for others). The only problem with this (apart from the battery issue) is that if you knock the bluetooth off or knock the phone to airplane mode (as I do at nights) then when you knock the bluetooth back on it forgets that you want it to be constantly visible so you have to go through the settings and check the box

Does an app exist to auto-launch an app when bluetooth pairs with a specific device?

I listen to Pandora in my car via bluetooth every time I go somewhere. It's slightly annoying to have to launch the app every time. I'm wondering if there's an app out there that will automatically launch a program when my phone is paired with a specific device (like the Pioneer deck in my car).
I'd like my music to start up automatically when I start my car.
Anyone know of anything?
Thanks!
Locale+Locale Bluetooth Plug-in might solve this issue for you. I'm not allowed to post links but make a search for it on play.google.com.
Instead of Locale, I'd use Tasker. Locale is kind of outdated, and Tasker is less expensive (iirc) and has more support - from both the developer and the community. I never found a real need for the app so I don't know much about it. There is a 7 day trial available on the Tasker website, use that to decide if it can do what you'd like. There may already be a configuration on the website to do what you want to do, so search through those as well.
Try and find the razr's smart actions apk
Sent from my DROID RAZR using XDA
Check out YouBlue
I developed YouBlue for this purpose. It can auto start a variety of music apps on Bluetooth connect, but that's not all. It's a service, so it listens for events like wifi connect/disconnect, Bluetooth connect/disconnect in an attempt to turn your bluetooth adaptor on or off as needed. The algorithm is completely customizable in the settings.
Best of all, it's free. Search for it on the play store or amazon app store. YouBlue - Smart Bluetooth Auto
When I drive away from home in the morning, my phone never leaves my pocket. It detects loss of wifi connection, turns on Bluetooth to see if my car is in range, then once connected, starts pandora.
Bluetooth connect & Play
I would suggest the following application which is custom built for your use case.
As a new user I can't post a direct link to it, but you can find it in the google Play store.
Code:
https://play.google.com/store/apps/details?id=com.cp2.start.and.play.music.player
does youblue have the option to open different apps for different devices?
youblue said:
I developed YouBlue for this purpose. It can auto start a variety of music apps on Bluetooth connect, but that's not all. It's a service, so it listens for events like wifi connect/disconnect, Bluetooth connect/disconnect in an attempt to turn your bluetooth adaptor on or off as needed. The algorithm is completely customizable in the settings.
Best of all, it's free. Search for it on the play store or amazon app store. YouBlue - Smart Bluetooth Auto
When I drive away from home in the morning, my phone never leaves my pocket. It detects loss of wifi connection, turns on Bluetooth to see if my car is in range, then once connected, starts pandora.
Click to expand...
Click to collapse
I am looking for something that will turn on different apps for different devices. I use one app at home on bluetooth speakers and a different one when connected to stereo in the car. Does youblue do this?

[Q] One click connect to *specific* Bluetooth device? [NFC Automation]

Hi All,
I have an NFC enabled Samsung Galaxy Nexus and have placed NFC tags in specific places (car, living room, home theater, bedroom, etc.) so that I when I set my phone on the NFC tag I can automatically play music over Bluetooth in that location.
I am trying to completely automate connecting to a *specific* Bluetooth device. (I am not looking to simply toggle Bluetooth on or off, or select the desired Bluetooth device from a menu.) I am currently using "NFC Task Launcher" to accomplish the majority of this, but as far as Bluetooth is concerned, the most I've been able to automate so far is to simply Bluetooth on or off. (I also tried "Tasker" but the functionality I am looking for is missing from this app as well.) I have not found a way to read an NFC tag and automatically connect to a specific Bluetooth device based on which tag is read, nor have I even found a "one click" app / widget that connects to a specific Bluetooth device. (If such a "one click" app / widget exists, I could automate the launching of that app to make the connection.).
(Also having the Bluetooth device in each location initiate the connection isn't a viable solution, I need for the phone to iniatiate the connection.)
Does anyone have any suggestions? Thanks in advance!
Ran across this looking for the same answer. Surprised no one has responded in over a month here.
Did you have any luck finding a workaround for specific BT device connections?
Hi,
I am the developer of MacroDroid an automation application for Android (that supports NFC tags).
This is a feature one of my users has just requested, so I'm just starting to look into the feasibility of adding it. (I came across this post during my initial research).
I will report back here on what I find and if all goes to plan I'll get the feature added to MacroDroid ASAP.
In the meantime, I'd appreciate ALL feedback (positive and negative) with regards to MacroDroid as I hope to make it as powerful and flexible as possible. It's available on Google Play here:
https://play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=en
Cheers,
Jamie
Just a quick follow up to my last post.
I believe it is possible to implement functionality to connect to a specific device. I currently don't have an appropriate device to test this, but I have one on order. As soon as I receive it, I'll have a go at adding this to MacroDroid.
In the meantime the following app on the market:
https://play.google.com/store/apps/details?id=a2dp.Vol&hl=en
Has the capability to connect to a second Bluetooth device when a Bluetooth connection is established. This may or may not help depending on what you are doing.
Any update on this? I'm also in the same boat. My car doesn't automatically connect anymore, never really did, I think its Bluetooth > 3.x on phone( 4.0 right now, but same on older past devices on S3 ) and the stereo bluetooth is older version( can't remember exactly. )
Anyways, thanks dev for posting about the other app, plan on trying it out tomorrow. In the meantime have you made any progress on your app for this functionality? I'd rather keep everything( all settings ) in one app if I can. Don't think Tasker allows this still, not sure on locale but I doubt it also.
Eagerly awaiting an update
A few more options
Did a little more searching just in case anything new has been released recently - came up with a few new options.. None seem to suit my need (trigger connection within Tasker via a plugin or directly opening an app), but posting here since they may help others.. I haven't tried these - just going on app descriptions.
So, in addition to A2DP Volume as suggested by UndeadCretin, which would be the best option if you want the connection to a A2DP device when another BT device connects, there's also Car Music Connector (https://play.google.com/store/apps/details?id=com.cleansoft.carmusic) which would seem to fit the bill for most people perfectly. Free, and "Connects you device to Bluetooth stereo in one widget click or NFC tap." Downside would seem to be that it would need to be set as default NFC app for one tap NFC triggering.
If just a widget is needed, Bluetooth Autoconnect (https://play.google.com/store/apps/details?id=com.btautoconnect), which is a paid app - although Car Music Connector also has a widget so is probably a better (and free!) choice.
Edit: Scratch that.. Car Music Connector doesn't prompt for a device to connect to.. I only have 1 A2DP device paired, and it wont connect to it (just times out) - maybe someone else will have better luck.
Bluetooth Autoconnect seems like it should work, however it enables/disables bluetooth at the same time - so if you already have bluetooth turned on, it turns it off. <sigh>
I'm unable to get it to connect to the either of 2 A2DP devices though - emailed the Dev hoping that it's just something funky with my device (Galaxy S3) that can be worked around.
Interested in this as well.
Firstly sorry for the long delay in replying!
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device. I have it working on my 2.3 and 4.0.4 and 4.1 devices but I only have a single audio device to test against. Some users have reported that it's not working for them, so if anyone does try this I would appreciate any feedback if it works or doesn't. If it's not working for you could you please tell me the device, OS version and device you are trying to connect to. Feedback here is fine, or mail me at: [email protected]
Best Regards,
Jamie
UndeadCretin said:
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device.
Click to expand...
Click to collapse
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Kaibosh said:
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Click to expand...
Click to collapse
The resource usage of MacroDroid should be very low as it is effectively dormant in most cases. MacroDroid does run as a foreground service so it displays a persistent icon in the notification bar. If this annoys you there is an option in settings to turn off the foreground service. In most cases it will still work but YMMV. Anyway you can get the basic functionality for free, so you can give it a try and see how it works for you.
Regards,
Jamie
I have just submitted an updated (V1.3.8) that will hopefully solve the issue some users were seeing with the Bluetooth audio connection. I appreciate any feedback if it works (or not) for you....
Car Music Connector
Hello,
In addition to A2DP profile Car Music Connector waits for Headset profile to be connected by default. This is more reliable for most car bluetooth enabled stereos. If you are using it with A2DP only device you need to disable "Wait for Headset Bluetooth connection" in settings.
Hope that helps.
Alexander Shakhov.
Car Music Connector author.
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
klau1 said:
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Click to expand...
Click to collapse
Awesome! Gonna download it now and try it in the morning... but ya still get the thanks regardless of how it works for breathing life into this thread

Changing Output Options in Music App or DoubleTwist

Is there a way to choose between Bluetooth and the phone when using either of these apps? I currently have to turn off my bluetooth device in order to get the music to play through the phone. Am I missing a conveniently placed button somewhere?
I really hate bumping threads, but I'm dying to find out if there's an answer to this or not.
Try turning off the Bluetooth on the phone so it doesn't connect to the Bluetooth device. I have the toggle in my notification bar for easy and quick toggling.
Sent from the Hottest Phone of 2013 (HTC One)
i have this issue..what i usually do is go into the device under Bluetooth settings, and toggle the Media streaming option under that device. ill take a screenshot later if needed

[H] XTZ with docking station

Hi all,
I got my XTZ with docking station the other week.
When I first connected to the cradle it started some app I just dismissed and didn't really care about at the time.
Now its started every time I dock the tablet, but there is a bug I think. The volume starts to go crazy ON/OFF on the tablet.
As if the volume down button is hold, but when I try to volume up with the HW the button it automatically gets down again. When I remove the tablet everything is OK.
I didn't find it to be a known issue and any way to resolve it.
Is there a workaround?
Hate to use the tablet just as photo frame when docket, I would like to use it as a player also.
Rozamar said:
Hi all,
I got my XTZ with docking station the other week.
When I first connected to the cradle it started some app I just dismissed and didn't really care about at the time.
Now its started every time I dock the tablet, but there is a bug I think. The volume starts to go crazy ON/OFF on the tablet.
As if the volume down button is hold, but when I try to volume up with the HW the button it automatically gets down again. When I remove the tablet everything is OK.
I didn't find it to be a known issue and any way to resolve it.
Is there a workaround?
Hate to use the tablet just as photo frame when docket, I would like to use it as a player also.
Click to expand...
Click to collapse
Take a look at Smart Connect - in the "View" tab it allows you add start and end actions when charging via the dock - this includes starting apps, open webpages, playing media tracks etc ... I suspect your offending app is being triggered by this - simply delete it and add your own (or have it do nothing like I did).
hth
Rozamar said:
Hi all,
I got my XTZ with docking station the other week. When I first connected to the cradle it started some app I just dismissed and didn't really care about at the time. Now its started every time I dock the tablet, but there is a bug I think. The volume starts to go crazy ON/OFF on the tablet. As if the volume down button is hold, but when I try to volume up with the HW the button it automatically gets down again. When I remove the tablet everything is OK. I didn't find it to be a known issue and any way to resolve it. Is there a workaround? Hate to use the tablet just as photo frame when docket, I would like to use it as a player also.
Click to expand...
Click to collapse
The misbehaving app is most likely the Crackle app (see THIS THREAD) that came pre-installed on the tablet and currently, no amount of tinkering with it or Smart Connect will cause it to not start when the tablet is placed into the charging cradle. My research has found it to be a Crackle bug, not a Sony bug. You can solve the problem by uninstalling the pre-installed Crackle app and then installing the Crackle app (version 3.0.2) provided by Amazon.com. Do not install the Crackle app provided by Google's Play Store, it is the same version (3.0.11) that is pre-installed on the tablet. The main difference I have experienced between Crackle 3.0.2 from Amazon.com and Crackle 3.0.11 from Google's Play Store is 3.0.2 displays its selection screens in portrait mode whereas 3.0.11 displays its selection screens in landscape mode. Both versions of Crackle display videos in landscape mode.
Its actually Smart Connect (LiveWareâ„¢ Mgr) I think. I downloaded and tested some other apps for cradle like Night clock and even when not docked it behaves the same way if started - Smart connect was not started.
Any workaround? Seems like XTZ issue to me if other apps from the market behave like this as well. I think I found a menu where I can set what to happen if connect to dock/charger, but it has no option to remove auto Silent mode.
It seems strange as my dock station is completely controllable. My XTZ behaves exactly the way I want it to.
Maybe you can try to uninstall ane reinstall Smart Connect. Then go to Dock tab, set the sound to normal whenever your tablet is docked
Sent from my C6602 using xda app-developers app
Haha thats funny.
I actually can't find SmartConnect as an app. Tried to tinker a bit more with the settings, but realized it is only accessible if started by docking in the cradle. Not in either app browser or app management .
Didn't have access to the cradle yesterday, and when I have access I usually don't have the time.
Today when I connect it automatically started with music playback (still muted) and gallery slideshow. I found it has 4 types of events connect to dock (labeled View??), When on Mobile, When in Home, etc. But none had added option to turn sound OFF. When I added clock to View event, it didn't start the clock, but actually turned on the music player
Any idea how the app is labeled in App managed, or if it is in the app browser with a different name?
Go to Play Store and search for Smart Connect. If it is not installed, install it. If it is, you will see an option to open it.
So far I cannot think of any other solutions for you except Smart Connect. Sorry if I am not helpful
I don't know if Smart Conncet is pre-installed because apps are automatically installed when I link XTZ to my Google account. All apps in my Xperia phone are downloaded to XTZ.
Whenever I dock my tablet I get a popup asking me to choose one of my dowloaded bedside clock/alarm apps. I went into Smart Connect and deleted all events but the popp continues to show. Any ideas what could be causing the auto launch? Thanks.

Categories

Resources