Setting up Xperia Z2 Case List here
Announced:
Elecom
Suncrest
Zerolemon
QCell
Muvit
http://www.mobilefun.co.uk/blog/2014/01/the-first-sony-xperia-z2-case-announced-muvit-carbon-case/
Dear "-------------"
Unfortunately this case does not have a cut of the magnetic charging function. Currently Case-Mate have no plans to include this I’m afraid.
I apologize for the inconvenience caused by this.
Kind Regards,
Ross Callaghan
Case-Mate eCommerce Manager
Click to expand...
Click to collapse
Just sent a message to Case-mate to ask if the Tough Sony Xperia Z2 Case ( really nice case) included a cutout for the magnetic charging port and unbelievably it does NOT :crying:
If using the charging dock (which I would be) means that everytime you want to chage the Z2 you would have to remove the case
The Bugdroid Circuit Case for Sony Xperia Z2 DOES have the cutout for the magnetic charging port, lots of colours & excellent protection
here:- http://www.cruzerlite.com/bugdroid-circuit-case-for-sony-xperia-z2
Can't you take an exacto knife an cut a hole in the side for the magnetic port? I have done this for the IR blaster on the M7.
Sent from my C6906 using XDA Premium 4 mobile app
augie7107 said:
Can't you take an exacto knife an cut a hole in the side for the magnetic port? I have done this for the IR blaster on the M8.
Sent from my C6906 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes that is an option, However I have now purchased the Bugdroid Circuit Case for Sony Xperia Z2 case from cruzerlite.com which has them in stock in 11 different colours at only $9.90 .
Cool design & really effective at protection, here's a video of Zedomax drop testing the same case but for the nexus 5,
https://www.youtube.com/watch?v=KY9Svj9fYVg&list=PL5w_3z2NCT2VUSWZnF2tMEn1lcmRmhzdu
Spigen has also started listing Z2 cases on its site. I plan on using the magnetic charging port most of the time as well, so kinda bugs me that it's covered w/ these cases.
Just arrived, now need the phone to go in it:
http://www.mobilefun.co.uk/krusell-malmo-flipcover-case-for-sony-xperia-z2-black-p44215.htm
Magnetic closure, access to charging port if open....
Add spigen to the list releasing mid April in the USA
Sent from my SGH-T889 using XDA Premium 4 mobile app
on sony website, it's indicated that the charging dock is sold with adaptator to adapt to phone with case.
smeone know if a case is already compatible with the Magnetic Charging Dock DK36?
regards
Huck33 said:
on sony website, it's indicated that the charging dock is sold with adaptator to adapt to phone with case.
smeone know if a case is already compatible with the Magnetic Charging Dock DK36?
regards
Click to expand...
Click to collapse
The Bugdroid Circuit Case for Sony Xperia Z2 DOES have the cutout for the magnetic charging port, lots of colours & excellent protection
here:- http://www.cruzerlite.com/bugdroid-c...sony-xperia-z2
Isn't there a nice slim black one that doesn't take over the actual shape of the phone? I hate those flip cover ones too.
I need a thin bumper,but i couldn't find yet in anywhere.
Publicglutton said:
Just sent a message to Case-mate to ask if the Tough Sony Xperia Z2 Case ( really nice case) included a cutout for the magnetic charging port and unbelievably it does NOT :crying:
If using the charging dock (which I would be) means that everytime you want to chage the Z2 you would have to remove the case
The Bugdroid Circuit Case for Sony Xperia Z2 DOES have the cutout for the magnetic charging port, lots of colours & excellent protection
Click to expand...
Click to collapse
did cruzerlite verify that the case does have the cutout for magnetic charging?
3366422
I have just ordered the official sony flip case £18.50 del amazonuk
t-blizzard said:
did cruzerlite verify that the case does have the cutout for magnetic charging?
Click to expand...
Click to collapse
I opened a ticket to ask that specific question and Renee Michael (wife of Joel Michael - Owner & President) confrimed that it does have a cutout for the magnetic charger.
Upon her confirmation I have ordered one in orange, they have just finished production so should be with me within a couple of weeks, but that's becauce I am in the UK so takes a while for delivery.
Nice thanks man, i ordered a clear for my black z2.
Sent from my SGH-T989 using Tapatalk
Publicglutton said:
I opened a ticket to ask that specific question and Renee Michael (wife of Joel Michael - Owner & President) confrimed that it does have a cutout for the magnetic charger.
Upon her confirmation I have ordered one in orange, they have just finished production so should be with me within a couple of weeks, but that's becauce I am in the UK so takes a while for delivery.
Click to expand...
Click to collapse
Would it be safe to assume the Sline TPU Case from cruzerlite comes with the same cut out? Both cases look the same apart from a different design on the back, I prefer the Sline as it looks more elegant
Had a cruzerlite case on my S III and it was great!
fatguy666 said:
Would it be safe to assume the Sline TPU Case from cruzerlite comes with the same cut out? Both cases look the same apart from a different design on the back, I prefer the Sline as it looks more elegant
Had a cruzerlite case on my S III and it was great!
Click to expand...
Click to collapse
I would think so , it would be stupid of cruzerlite not to do the same with the sline case.
However if you really want to make sure, best to open a ticket and mark it as urgent , they always reply to me within a day
This looks like a decent TPU case for only a few pounds.
Good to see that the magnetic charging port is exposed and that the case is slightly recessed to allow for the stereo speakers while still protecting the whole top and bottom of the phone.
http://www.amazon.co.uk/Terrapin-Xp...sr=8-4&keywords=Terrapin+-+Sony+Xperia+Z2+TPU
kersey said:
This looks like a decent TPU case for only a few pounds.
Good to see that the magnetic charging port is exposed and that the case is slightly recessed to allow for the stereo speakers while still protecting the whole top and bottom of the phone.
http://www.amazon.co.uk/Terrapin-Xp...sr=8-4&keywords=Terrapin+-+Sony+Xperia+Z2+TPU
Click to expand...
Click to collapse
Yep looks good, may get this to tide me over until my cruzerlite bugdroid arrives
Related
Hello Everyone,
I bought Sony Xperia Tablet Z few months ago. I was using official sony cover which came with the tablet. After 3 months of usage I found out that the screen has scratches where it is always protected by the cover itself. Therefore I gave it to sony and they replaced it with a new tablet. However, I cannot use the cover now and therefore I need a new one.
I am looking for a flip cover where I can charge my tablet without opening the cover.
Please suggest one. I am located in India.
I have used MoKo(TM) Slim Cover Case for Sony Xperia Tablet Z 10.1 inch. You can buy it in Amazon. I live in Norway and Amazon doas not post it to Europe, so ordered it from Aliexpress fro China.
BTW. After I received Moko Slim Cover, I have modified my original Sony cover the same way by cutting small window 50x22 mm, 25 mm fom the edge.
I bought a poetic slim case from Amazon. Works great! there is an opening in the cover to plug the cable in while the cover is closed.
Esmm3 said:
I bought a poetic slim case from Amazon. Works great! there is an opening in the cover to plug the cable in while the cover is closed.
Click to expand...
Click to collapse
I bought it too. Thanks.
@mods: Please close the thread.
fabler said:
I bought it too. Thanks.
@mods: Please close the thread.
Click to expand...
Click to collapse
Poetic slim will damage LCD, I stopped using it and had to return my previous xperia tablet z because of pixel damage. The tablet is so flexible that removing device from the case puts a lot, too much pressure on the LCD.
I then bought the sony case and I prefer it. Haven't had any scratches from using it, its smooth on the inside. I kept the built factory applied screen protector on the tablet
cantenna said:
Poetic slim will damage LCD, I stopped using it and had to return my previous xperia tablet z because of pixel damage. The tablet is so flexible that removing device from the case puts a lot, too much pressure on the LCD.
I then bought the sony case and I prefer it. Haven't had any scratches from using it, its smooth on the inside. I kept the built factory applied screen protector on the tablet
Click to expand...
Click to collapse
Thanks for your input. It seems that it's better not to use any case then.
You guys have links for these cases that you recommend?
fabler said:
Thanks for your input. It seems that it's better not to use any case then.
Click to expand...
Click to collapse
Sony case is good. Only applies presurre from the left and right side of the screen landscape. You can remove tablet just by sliding it in and out (as opposed to having to bend your tablet, lol) it also provides a bevel for shock protection and can be used with the charging cradle.
The poetic slim feels nicer and i would recommend this case if you plan on never removing your tablet againand never dropping your tablet or if you do not plan on using the charging cradle. I use the cradle because I think overtime waterproof feature will be better maintained and I have read reports of the USB connector breaking off. Want to save that connector for delicate flashing use only
Just got my ultra today. I also got 2 cases delivered. Both of these cases neither one of them has a cutout for the charging dock ports. i have the dock and obviously want to use a case that i can use on the dock.
can anyone recommend a hard or tpu type case that will meet my needs? no idea why these cases wouldn't have the proper cutouts
I've just bought an Incipio Watson case which also doesn't have a cut-out for the magnetic connector.
I plan to spend two minutes this evening with a craft knife fixing the problem!
Philip said:
I've just bought an Incipio Watson case which also doesn't have a cut-out for the magnetic connector.
I plan to spend two minutes this evening with a craft knife fixing the problem!
Click to expand...
Click to collapse
yeah, i was hoping it wouldn't come to that but i guess it may. it seems the only case i can find online with the proper holes ships from china.
can't get anything from amazon now with the proper holes shipped quickly, i bought what they had. sucks.
knives of ice said:
Just got my ultra today. I also got 2 cases delivered. Both of these cases neither one of them has a cutout for the charging dock ports. i have the dock and obviously want to use a case that i can use on the dock.
can anyone recommend a hard or tpu type case that will meet my needs? no idea why these cases wouldn't have the proper cutouts
Click to expand...
Click to collapse
I finally broke down and ordered one of these.
http://octilus.us/made-for-xperia-case-xperia-z-ultra-bimat-black.html
Have to order from overseas but it does have the dock/charger cutout.. I payed $21.11 shipped
kable said:
I finally broke down and ordered one of these.
http://octilus.us/made-for-xperia-case-xperia-z-ultra-bimat-black.html
Have to order from overseas but it does have the dock/charger cutout.. I payed $21.11 shipped
Click to expand...
Click to collapse
i ordered this, at least it sure looks to me like it has the correct cutouts based on the pics
http://www.amazon.com/gp/product/B00FGYT6WS/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
You could try the Nillkin fresh series. I didn't really like the plastic back but what i like is the screen cover and that it has a cutout for the magnetic charging port.
Unfortunately, just because a case has the cutout, doesn't mean it works. this is the one I've got and while it fits in the DK30 dock (with the bigger inlay), the problem is that the dock has the phone sitting at an angle and I can't get the magnet to "grip".
I tried my best modding the thing to fit, didn't work out. So good luck with yours, please report back if you've been lucky enough to find something that works.
I also use the magnetic charging port for charging. I found the following TPU case. I purchased one in smoke, and liked it so much I then purchased another one in black. Works great. Highly recommended!
The item is: Black Matte TPU Silicone Gel Case Cover For Sony Xperia Z Ultra XL39h C6802 on eBay
Sold by mobilethink
(I'd list the direct link, but I am not allowed as someone who hasn't posted enough). I hope this helps.
just got my 4th case today. this is far and away the best i've gotten
http://www.ebay.com/itm/181400289992?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
has all the charging ports and the grip on the sides is awesome. i have the other cases recommended in this thread as well. i like this the best by far.
jb8von said:
I also use the magnetic charging port for charging. I found the following TPU case. I purchased one in smoke, and liked it so much I then purchased another one in black. Works great. Highly recommended!
The item is: Black Matte TPU Silicone Gel Case Cover For Sony Xperia Z Ultra XL39h C6802 on eBay
Sold by mobilethink
(I'd list the direct link, but I am not allowed as someone who hasn't posted enough). I hope this helps.
Click to expand...
Click to collapse
Thanks for the info on the case, I have the same case that I bought more by luck than judgement when I bought my Z ultra.
Please could you let us know if the case works with:
A.) The official magnetic dock
B.) A magnetic charging cable
C.) Both of the above
Cheers,
Rob
Rob, this case works with the charging cable. I'm not sure if it works with the charging dock as I don't own one. I hope this is (somewhat) helpful.
Good luck,
Josh
Thanks Josh, I'm going to order a cable for my shiny new toy
Cheers,
Rob
After dropping my beautiful phone and getting the corner peeled I decided to look for this exact combo; a case with a charging dock connection cut out that works with a magnetic cable. As you guys already know the charging port flap becomes pretty flimsy after a while and I did not want to risk it breaking.
After much trial and error I found a combination that works.
This cable:
http://www.aliexpress.com/item/Magn...agnetic-USB-cable-charger-for/1708094470.html
Works perfectly with this case:
http://www.ebay.com/itm/NILLKIN-Ult...Cell_Phone_PDA_Cases&var=&hash=item1e945842a2
The Nillkin case itself is pretty good but I'm also pretty sure that this cable will work with other cases that have a similar cutout. The magnetic connection from the cable is not that strong but gets the job done.
Thanks for post a working combo
R
knives of ice said:
just got my 4th case today. this is far and away the best i've gotten
http://www.ebay.com/itm/181400289992?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
has all the charging ports and the grip on the sides is awesome. i have the other cases recommended in this thread as well. i like this the best by far.
Click to expand...
Click to collapse
Looks better than the $2 ones. How much bend does this have? How soft vs rigid?
Hi there,
Would like to find out if anyone has tried and proven good covers/cases/bumpers that are dock-friendly?
Thought this would be a good place to start and share.
Thanks,
Chester
Case-Mate Barely There is dock friendly, just use the 45B plate for the dock will do.
AKK03 said:
Case-Mate Barely There is dock friendly, just use the 45B plate for the dock will do.
Click to expand...
Click to collapse
none of the docks work for me and I have a casemate barely there case.
im using the dock without any of the adapters.
Shudder123 said:
none of the docks work for me and I have a casemate barely there case.
im using the dock without any of the adapters.
Click to expand...
Click to collapse
Case-Mate Barely There works with the official dock DK48, just make sure you use the 45B plate.
AKK03 said:
Case-Mate Barely There works with the official dock DK48, just make sure you use the 45B plate.
Click to expand...
Click to collapse
i have it and can't fit in any of the plates. charging without the plates works though
no it doesn't....
AKK03 said:
Case-Mate Barely There works with the official dock DK48, just make sure you use the 45B plate.
Click to expand...
Click to collapse
I have the Case-Mate Barely There and I can confirm that IT DOES NOT fit with the official Sony magnetic dock using either 45A or 45B inserts. I haven't found a single case that does fit as yet... and charging without using an insert isn't ideal as the slightly knock causes the connection to be lost....
DrWig said:
I have the Case-Mate Barely There and I can confirm that IT DOES NOT fit with the official Sony magnetic dock using either 45A or 45B inserts. I haven't found a single case that does fit as yet... and charging without using an insert isn't ideal as the slightly knock causes the connection to be lost....
Click to expand...
Click to collapse
although, just to argue with myself, I've contacted Case-mate and they state that it should fit the magnetic dock. So either I'm being really thick, or my inserts for the DK48 aren't correct, or both......I'm going to recheck tonight!
cheers
DrWig
The DK36 works with the Case Mate Barely there and the wider of the two inserts included in the packaging. It was about $20 on Amazon. It charges pretty quickly as well.
DrWig said:
I have the Case-Mate Barely There and I can confirm that IT DOES NOT fit with the official Sony magnetic dock using either 45A or 45B inserts. I haven't found a single case that does fit as yet... and charging without using an insert isn't ideal as the slightly knock causes the connection to be lost....
Click to expand...
Click to collapse
It will fit with 45B insert, unless you have glass screen protector on. The glass will cause 45B to be not fit.
AKK03 said:
It will fit with 45B insert, unless you have glass screen protector on. The glass will cause 45B to be not fit.
Click to expand...
Click to collapse
This definitely isn't the case for mine - doesn't fit and I don't have a glass screen protector. However, I've found that it does fit with one of the inserts for the Z3 Compact - 35B, I think it's called - I'd always assumed this insert would be smaller so stupidly hadn't tried it, but perhaps the Z3 Compact is slightly fatter.
I'm not sure whether my case, or the dock is at fault here....
cheers
DrWig
I've done a short review of the Smart window style cover (dock friendly) in this thread.
http://forum.xda-developers.com/showthread.php?p=56541197
chesterchen said:
Hi there,
Would like to find out if anyone has tried and proven good covers/cases/bumpers that are dock-friendly?
Thought this would be a good place to start and share.
Chester
Click to expand...
Click to collapse
I know this isn't the answer to your question, exactly.. but... I went and looked at the dimensions of the Z3/Z2 and their respective docks and the extra thickness of the Z2 means its dock is just a tiny bit deeper... so I bought one and it accommodates a Z3 with a snap-on shell case *so* much better than the Z3 dock, even with the adapter. The TPU cases still don't fit without struggling to get it in and out though. The Z2 dock is also around half the price (or less).
Hey guys,
I know many are after a decent case for the Z3 and I have these 2 which I've covered in a review I posted up recently on Neowin: http://www.neowin.net/news/case-mate-barely-there-for-xperia-z3-review
Hopefully the info helps make up a decision for some of you!
Thank you for thevreview, I have just ordered one of these cases.
Appreciate the review!
Thanks for doing this review, I was kinda concerned if the case-mate barely there for the Xperia Z3 would be compatible with the official dock.
I'll be getting this case but the clear version, as I got the Xperia Z3 in mint silver on 02 and it looks so nice!
I want the clear version too just to be able to see the shiny rear glass
robbiekhan said:
Hey guys,
I know many are after a decent case for the Z3 and I have these 2 which I've covered in a review I posted up recently on Neowin
Hopefully the info helps make up a decision for some of you!
Click to expand...
Click to collapse
I noticed a commenter on the review mentioned how much he disliked cases without symmetry...I feel like I might be the same way, but I'm not sure and would really like a case that could work with the dock. So do you feel like it's not really a big deal? Still comfortable to hold on to? Should I just get over it and get the case? Haha
JBDX1319 said:
I noticed a commenter on the review mentioned how much he disliked cases without symmetry...I feel like I might be the same way, but I'm not sure and would really like a case that could work with the dock. So do you feel like it's not really a big deal? Still comfortable to hold on to? Should I just get over it and get the case? Haha
Click to expand...
Click to collapse
Aye I really don't think it's a big deal. It's slim enough and it's black so doesn't really stand out as a distraction.
I bought a charging dock, and the case, and they should both be here by Tuesday.
I received the Nillkin today and unfortunately the Magnector X charging cable does not fit. I managed to trim a little bit on the sides though and now it works! Good to know before you order
Ah that's good to know cheers!
robbiekhan said:
I want the clear version too just to be able to see the shiny rear glass
Click to expand...
Click to collapse
I know right + it feels so nice in the hand
I actually prefer without the case! Phone feels amazing metal and glass but a case just takes away that feel
I'll just be careful
I like to feel the glass back as well and didn't want to put a case. I am using a bumper to cover the sides to offer some grip
fatalus said:
I received the Nillkin today and unfortunately the Magnector X charging cable does not fit. I managed to trim a little bit on the sides though and now it works! Good to know before you order
Click to expand...
Click to collapse
Did you trim the magnetorx cable? If so where I have this case, and have the cable on the way.
Sent from my Xperia Z3
russell664 said:
Did you trim the magnetorx cable? If so where I have this case, and have the cable on the way.
Sent from my Xperia Z3
Click to expand...
Click to collapse
No, not the cable of course! I trimmed a little bit of the case where the lower part of the magnetic connector touches. You will see it when you receive both the case and the case.
Can anyone verify that the MagnectorX magnetic cable will fit alright with the Case Mate? I just ordered it up as it doesn't fit with my current case. It looks like it will be good to go, but just want to be sure.
It's all open side that end on the Barely There so yeah shouldn't be a problem.
The MagnectorX connector adapter will fit with the Case Mate Barely There, but it is not a completely secure connection. It will charge fine, but moving the phone while it is connected could dislodge it. The angle of the connector is very steep and leaves the cord very close to the case. On this thread http://forum.xda-developers.com/z3/accessories/magtrons-magnector-x202-cable-adapter-t2919541 it appears that the Magnector cable has more clearance. From those pics, it will fit with the case with trouble. The Barely There case works fine with the Z2 dock DK36, however. I purchased that dock since the price was lower than the dock for the Z3.
I also have a Sony XSP-N1BT receiver in my car (basically a dock which turns the phone into the face plate of the receiver and it has the magnetic pins to charge the Xperia phones) and with a little bit of fiddling, the phone will charge with the Barely There.
like the barely there case because of its slim design. but still would prefer a case that covers all the edge as well. maybe the casemate slim tough will be more suitable?
Since barely there is hard plastic, will it cause scratches to the phone eventually?
is The clear's finish is it the same as the black?
I didn't want to spend ~$40 on a dock, so this was the next best option. You can get the USB cable or USB Adapter
If you'd like to see my other videos, consider subscribing by hitting the image below
+Thanks for this.
Im just curious though, the z2 had a problem where the magnetic port was actually coming of the phone when stronger magnets were used. I'm hoping this issue was solved with the z3. If you ever run into issues please share!
mrgizmoe said:
+Thanks for this.
Im just curious though, the z2 had a problem where the magnetic port was actually coming of the phone when stronger magnets were used. I'm hoping this issue was solved with the z3. If you ever run into issues please share!
Click to expand...
Click to collapse
Nothing currently, I've used it a few times already a didn't notice anything!
Just got my magnector x cable here from Amazon. Paid roughly 25 with shipping to Toronto. Can confirm it works great ringke fusion case and Case-mate barely there case with nillkin tempered glass applied. No issues at all as both cases have a cut out and/open space for the pogo charging.
omarn31 said:
Just got my magnector x cable here from Amazon. Paid roughly 25 with shipping to Toronto. Can confirm it works great ringke fusion case and Case-mate barely there case with nillkin tempered glass applied. No issues at all as both cases have a cut out and/open space for the pogo charging.
Click to expand...
Click to collapse
Nice, waiting on some Diztroniz & Cruzerlite cases to test as well
I should have the X2 version next week