[Urgent Help PLS] I need CWM Script to copy some file to a specific path in my Phone
i need to copy a file "settings.db" back to this path in my phone "/data/data/com.android.providers.settings/databases"
thank you!!!!!!!!!!!
Adelm2013x said:
[Urgent Help PLS] I need CWM Script to copy some file to a specific path in my Phone
i need to copy a file "settings.db" back to this path in my phone "/data/data/com.android.providers.settings/databases"
thank you!!!!!!!!!!!
Click to expand...
Click to collapse
i fixxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxed the phone OMG !!!!!
i was able to contact with my phone via ADB under CWM but with problems !
1-i could not run adb shell
2-the storage not appears in the computer
then i flash PhilZ-cwm6-XXLSJ-OXX-3.5.tar & everything become super fine ♥♥♥
anyway it is good to know the answer of my question ,i really want to know how
Related
Hello people.
Good morning everyone.
I`m testing AVD Manager and the Note skin with the default .img of system.
I`m looking for info, because i cant load my custom rom.zip
I`m looking at google and xda but cant find this answer.
Apologize about my english.
--
finally found it
i have to convert my .zip to .img
with what program?
pacogp said:
i have to convert my .zip to .img
Click to expand...
Click to collapse
how did you convert .zip to .img ???
As far as I know it's so easy by the DD commands .
enter recovery and connect phone to your PC (of course you need the drivers and enabled usb debugging) .
go to the folder where you have ''adb.exe'' ,, press and hold ''shift'' key ,, right click ,, then choose ''open command window here'' .
write :-
Code:
adb shell
su
dd if=/dev/block/mmc.... of=/sdcard/system.img
{''if'' means ''input file'' ,, ''of'' means ''output file''}
where mmc.... is your system partition ,, it is diffrent from phone to phone .
and you will find it in your sd card (make sure you have enough space)
Good Luck
Hey!
A friend of mine has this new tablet - Coby Kyros Mid1060 - and ask me to install Gapps and what was missing...
The thing is... I accidentally renamed the 'boot proper' file original without copying the new one...
So, as you can imagine, i can't boot the tablet, it stucks on 'android' logo...
I've been searching for different ways to reach the file but i can't...
Before doing that renaming operation i managed to root the device and i can get to the recovery menu...
Is there a way to fix this problem?
I appreciate all your advices.
Thank you.
Same Problem
I'm having a very similar problem with that device.
I've deleted the build.prop file while trying to rename it.
Could anyone send me a copy of that file? I'm trying to replace it with an update.zip
Paulo Rodrigues
zecamanel said:
Hey!
A friend of mine has this new tablet - Coby Kyros Mid1060 - and ask me to install Gapps and what was missing...
The thing is... I accidentally renamed the 'boot proper' file original without copying the new one...
So, as you can imagine, i can't boot the tablet, it stucks on 'android' logo...
I've been searching for different ways to reach the file but i can't...
Before doing that renaming operation i managed to root the device and i can get to the recovery menu...
Is there a way to fix this problem?
I appreciate all your advices.
Thank you.
Click to expand...
Click to collapse
Hello.
I'm having the same problem ... Already have some solution?
This worked for me
I made the update.zip file that you could find in attach.
It replaces a build.prop file that will allow a factory reset.
The device will reboot again.
1. copy the file to an microSD
2. plug the microSD in the tablet
3. turn the device on in recovery mode ("volume down" and "on" )
4. select "apply update from sdcard"
5. select the "update-signed.zip" file
6. reboot you device
hope this helps
If you are stuck on the bootlogo, you can always edit/add/replace files in your device. No need for flashable zips.
Follow this
http://forum.xda-developers.com/showthread.php?t=2280206
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
einst31n said:
If you are stuck on the bootlogo, you can always edit/add/replace files in your device. No need for flashable zips.
Follow this
http://forum.xda-developers.com/showthread.php?t=2280206
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
Click to expand...
Click to collapse
My device wasn't detected by the computer... And there was no backup to recover...
A noobie thing.
Was it detected by android commander?
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
einst31n said:
Was it detected by android commander?
Hit thanks if I helped
sent from GT-S7562 , with a better stock ROM
Click to expand...
Click to collapse
I don't know... Don't have it..., but I can tell you that the USB debugging was disabled.
android commander is not an app its a windows program. Try connectingyour device to your PC and check android commander. If you have an insecure kernel , you can access the root of your device and make any changes you want.
einst31n said:
android commander is not an app its a windows program. Try connectingyour device to your PC and check android commander. If you have an insecure kernel , you can access the root of your device and make any changes you want.
Click to expand...
Click to collapse
Thanks.
nevertheless what I did worked for me and is a practical way for people with less skills or knowledge to solve their problem.
With that in mind I posted it.
I tried lots of thins, including connecting the computer to the tablet... nothing worked, but this did. My tablet is working now.
Original rom?
Hi there, is this the original rom file for the MID1060? My tablet is having some problems with the positioning sensor and i need to send it back to warranty, but i've modified it so it can have googleappz on it and i can't restore. Do you think that wth this i can solve it?
pjfsfr said:
I made the update.zip file that you could find in attach.
It replaces a build.prop file that will allow a factory reset.
The device will reboot again.
1. copy the file to an microSD
2. plug the microSD in the tablet
3. turn the device on in recovery mode ("volume down" and "on" )
4. select "apply update from sdcard"
5. select the "update-signed.zip" file
6. reboot you device
hope this helps
Click to expand...
Click to collapse
Hello everyone,
I pasted a custom rom (Trickdroid zip) file in sdcard of my HTC one, but when i go to recovery mode to locate and install the rom, i don't find it?
I search every file in sdcard while in recovery mode, still not found.
Although i can still see the zip file when connected to computer
What seems to be the problem?
I hope i can find an answer here
Try pasting it in the 0 sub directory on your sdcard
mcfarlan said:
Try pasting it in the 0 sub directory on your sdcard
Click to expand...
Click to collapse
Thanks for your replay.
I will try it and give my feedback.
I really did not realized that I was pasting in the wrong folder!!!
Thanks for the tip :good:
Dear Friends,
Need help please. I have installed another custom rom that was not meant for I9300 and now the EFS is corrupted. I tried installing orignal rom using ODIN but geting boot loop and the phone is not booting. On going into recovery i can see an error efs/ corupted or something like that. I have the backup of my EFS folder in tar.gz format however dont know how to install the same and recover my phone as not able to boot to android.
Please help me if someone can work it out. My phone has just 3 days of warranty left and it does not shows rooted anywhere except the count of installation is about 32 and rom says official and kernel says custom.
Please if someone can help me restore my phone back in working condition i shall always remain thankfull.
Regards,
Mush
mush2004 said:
Dear Friends,
Need help please. I have installed another custom rom that was not meant for I9300 and now the EFS is corrupted. I tried installing orignal rom using ODIN but geting boot loop and the phone is not booting. On going into recovery i can see an error efs/ corupted or something like that. I have the backup of my EFS folder in tar.gz format however dont know how to install the same and recover my phone as not able to boot to android.
Please help me if someone can work it out. My phone has just 3 days of warranty left and it does not shows rooted anywhere except the count of installation is about 32 and rom says official and kernel says custom.
Please if someone can help me restore my phone back in working condition i shall always remain thankfull.
Regards,
Mush
Click to expand...
Click to collapse
It is essential that you have a backup of the EFS partition and a way to place it back - the first two ways that I would think about are:
a) use a good recovery - like Philz recovery, that has commands to restore EFS
b) if the format of the backup is not exactly right you might be able to boot in recovery and use ADB commands.
xclub_101 said:
It is essential that you have a backup of the EFS partition and a way to place it back - the first two ways that I would think about are:
a) use a good recovery - like Philz recovery, that has commands to restore EFS
b) if the format of the backup is not exactly right you might be able to boot in recovery and use ADB commands.
Click to expand...
Click to collapse
Code:
su
umount /efs
dd if=/sdcard/efs.img of=/dev/block/mmcblk0p1 bs=4096
reboot
Ver3go said:
Code:
su
umount /efs
dd if=/sdcard/efs.img of=/dev/block/mmcblk0p1 bs=4096
reboot
Click to expand...
Click to collapse
I am new to adb commands. Will phylz recovery help me enter the commands? if yes then i shall be replying with the sd card efs tar file name. Will then you be able to guide me with the commands based on the tar file?
Thanks all of you in advance.
Mush
mush2004 said:
I am new to adb commands. Will phylz recovery help me enter the commands? if yes then i shall be replying with the sd card efs tar file name. Will then you be able to guide me with the commands based on the tar file?
Thanks all of you in advance.
Mush
Click to expand...
Click to collapse
No for ADB you boot into recovery, connect your computer via USB and run the ADB commands from either Linux Terminal or Windows Command Prompt.
The tool here:
http://forum.xda-developers.com/showthread.php?t=1703488
May help if you're new to adb.
Otherwise it's a case of downloading and installing the drivers for your phone and the Android SDK http://developer.android.com/sdk/index.html
Thanks for all your replies.
Just wanted to confirm if i have the efs backup in sd card as under folder backup_efs and there are two files in tar.gz format will i be able to use the phylz recovery to use this replace my efs folder? if yes then can you guide me the steps please.
Regards,
Mush
mush2004 said:
Thanks for all your replies.
Just wanted to confirm if i have the efs backup in sd card as under folder backup_efs and there are two files in tar.gz format will i be able to use the phylz recovery to use this replace my efs folder? if yes then can you guide me the steps please.
Regards,
Mush
Click to expand...
Click to collapse
I do not remember right now what creates an backup_efs folder but it really does not matter that much - the tar.gz is a "file archive" and .img is usually a partition image. Each could have minor advantages - the .img also contains the entire filesystem of the partition (and will work easier if the filesystem is bonked) but a tar.gz backup is more versatile when you have bad sectors or a changed partition.
Under an advanced recovery like Philz you would just navigate some menus and try to restore the EFS - see the info in those specific threads.
Under ADB you need to have stuff (drivers and some programs) installed in your PC, you connect the phone on USB and you run ADB commands from the command line.
Hello
here i am posting here because i cant post on Miscellaneous Android Development , how ever i think i post there before while working on B5512
I Just got new G700 it came with B115 middle east channel , phone is good but as a start is there is a update i must ask my self is root ready , and CWM for sure so i start the digging
@chamaruco thank you for your great thread which saved and helped many people
now i got a file and i think you were looking for it ""G700-U10_V100R001C00B124CUSTC432D001_Firmware_Portugal_Channel-Others_4.2.1_EMUI 1.8_05021LMW.zip"" it contain usb upgrade and sd upgrade with drv and flash tool
i notice EMUI 1.8 not 1.6 which i saw for example a permission manager with it on P6 is that here in that rom too ?
is that rom improved than mine b115 phone is good for first look but
(in B115)
1-camera quality is strange i dont mean bad but it look very strange it is like very poor on quality
2-in call volume is too low in my opinion all " in test mode"
Question now did any one get that update "EMUI 1.8 B124" can tell is there is any improvements ?!
Question am i able to flash CWM image directly with flash tool to save some annoying procedures ?!
a member here provide flasher and cwm.img and orginal recovery.img
i did not work with the phone yet need to shift data from old phone remove ext2 part and prepare for change , and feeling lost here
want to strike it all once
i will upload "EMUI 1.8 B124" soon as it came from a private server
any suggestions are welcome
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
how to install this firmware i.e. B124 on G700-10
chamaruco said:
When you install 1.8 you will notice there is only a tap error from uploader..it is a 1.6 emui. That's all.
Click to expand...
Click to collapse
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
talvigi said:
chamaruco; Thanks for the best of the best user guides you have been making for all of us, but what i want to know is to be able to install the B124 into my phone i.e. G700-10, i have rooted my phone using farmaroot, made a back up of my factory shipped OS and make all my data backup safe through Hisuit, have downloaded the firmware B124 Purtogal version, extracted the zip, (it is now carrying META-INF, boot.img, cust.img, logo.bin, sdload.log, system.img) i have made a folder in my SD card named dload and copied the files in it, uninstalled mobileuncle, reinstalled new mobileuncletool, copied my backuped recovery.img into my SDcard and somehow installed the recovery in to my mobile,
now please show me the way forward, what i need to do and how, please step by step if you kindly can. please.
YOU ARE THE BEST CHAMARUCO
Click to expand...
Click to collapse
Dload inside put update.app file, restart in updatemode
chamaruco said:
Dload inside put update.app file, restart in updatemode
Click to expand...
Click to collapse
But my mobile does not boot into CWM recovery mode as i have seen in my previous Qmobile A8 it always restarts in the defualt recovery mode which only give options to "1. reboot, 2. update from SDcard, 3. update from cashe, 4. wipe/delete user data and wipe/delete cache and in the last there is a calibarate TP, AND OFF COURSE THESE ALL ARE THE ANDROID BUILTIN RECOVERY STEPS NOT OF THE CWM
And off course there is not any file or folder named update.app in the downloaded .zip/extracted file. "as i have mentioned above the folder contains a folder named META-INF and three img files named as boot cust and system while a .bin file named logo too.
THANKS FOR YOUR TIME AND HELP.
foffa said:
Hello
some info to add
incase of softbrick the phone and unable to flash using spflash tool and receive " not allowed , forbidden "
solution
inside the usb upgrade >> flash "Rework-Secro" using scatter in same folder then you will be able to use download mode again
Click to expand...
Click to collapse
So after I select the Reworked scatter file there is only the sec_ro partition checked to flash. So after flashing it do I now select the previous scatter file and then flash everything (including preloader)?