Hello everyone,
So I tried to flash cwm 6.0.4.4 on my lg p760, but I did't saw what that zip was for LG 4x, flashing went successfully , but after reboot my phone won't start it reacts to nothing, no lg logo, no vibration. I would really appreciate any help to repair my phone
Sorry but you'll have to follow the unbrick guide here -
http://forum.xda-developers.com/showthread.php?t=2085344
Thank you for reply, but all these solutions are in download mode or recovery, but I can't access any of that the phone is just dead screen not showing anything, when I connect my phone to pc without battery windows is showing "usb device is not recognized" error and keeps it beeping just like I connect and disconnect my phone every second (I have usb drivers installed)
You need to follow this http://forum.xda-developers.com/showthread.php?t=2585161, mine had the same error and fixed in 10 min!
Related
So i stupidly installed chainfire 3d restarting my phone to a boot loop, i tried doing a hard reset still it restarted back to boot loop , I tried flashing a stock rom/kdz for my phone into lg support tool/r&d test tool, but every time i put it into s/w upgrade mode my pc dosent recognize it, it just says Usb device Not recognize , it also says device driver software was not successful , and i did
try installing my phone driver from here (LG P769 Support: Find Manuals & Warranty Info | LG USA) but yet it still dosent recognize it. I think this is the only problem thats blocking my way to unbrick my phone. I don't know if I'm installing the wrong driver or my phone.
If you know the right driver for my phone can you please reply with the link, I would be appreciated for your help.
my phone is also locked boot loader.
sorry for my bad english
Hi, I was looking everywhere since yesterday but can't find a solution. I had cwm + twpr + lollipop cm12. I've decided to back to stock, so as allways: driver, b2cApp, kdz, v20h and v10a, usb, s/w mode, xml parser, shhtp, etc... Standard offline kdz method. But during flashing I stuck on 15% and get the info that my phone anad pc are not connected by usb cable, I tried changing usb ports at pc, reinstaling everything, but I have still the same error. If that woldn't be much enough I ****ed something up and I think I don't have any recovery right now
I can put my phone in s/w mode but I stuck on 15% with usb not connected error.
I can put my phone in fastboot mode but my pc does not recognize it, its just pluging in and out it from windows.
I can put my phone in stuck on LG logo 'mode'
Any help? How to unbrick it? How to flash stock or at least some custom recovery? Of course unlocked bootloader. Please help me :crying:
Key it ****ed up even more.
When kdz show me to connect my cable i clicked retry, plugen cable out and in, kdz found my device, and go to step 2. In half way I had again the same error, so again clicked retry, plug out, plug in. Again founded my device, when I had downloaded 100%, same situation. founded my device, log that tool is extracting kdz and nothing. Waiting about ~1,5h, nothing happend, so I diconected cable. In that moment kdz go to third step and I get windows force close for not repodnig app kdz. I said a loud **** and started again. Phone has not been found anymore by kdz. After a few tries, booted to fastboot, and connected to computer. It has been found as Google Fasbtoo USB, no way to update driver to fastboot. I disconected phone and decided to try again with s/w but nope. S/W not turning on anymore (with or without battery). Fastboot not turning on any more. Just LG logo, when I'm connecting device to PC it is sometging pluging in and out but nothing showing in device manager
Any ideas? Please!
I have the SAME problem with my (now old) LG... I read more than 20 tutorials for getting back to stock and nothing
Sent from my GT-I9205 using XDA Free mobile app
I triend on clen frsh windows I get OMAP device, fastboot is finding my device but wont start fastboot mode in my phone, when trying to flash cwm I get security error and still no s/w mode So I'm affraid that we have to say goodbay to our L9
What's more:
1. Can't find orginal p760 recovery, tried to flash p769 and I get wird effect, after LG logo screen looks like broekrn, some color stripes and all display going to white, then turn off.
2. Using fastboot and choosing options wit u-boot making my phone turning to LG logo with no security error, still no s/w, fastboot or recovery mode.
3. Using option 1 (1. Fastboot) from the fastboot tool is making my phone turnig black screen and nothin more, no even LG logo.
Please can anyone help us?
Hi guys, I recently purchased a Homtom HT3 for my mother, when it arrived to me I charged it and checked it out a bit just to make sure everything was fine which it was.
She collected it from me the next day and told me she'd start to use it the day after, she calls me up the next day and tells me there's some problems with it and a few people at her workplace tried to fix it for her to no avail. I pick the phone back up and I notice that everytime I power it on, it gets stuck on the "homtom" logo.
As I don't know too much about fixing phones I only took the following steps before asking for advice here; I went into recovery mode by holding up volume and power button, the android guy with the red triangle appeared so I tapped up + power button to get into the recovery(?) menu. I wiped the phone to factory settings and deleted the cache in there but it hasn't fixed the problem.
I assume I need to flash a firmware or something to potentially fix this, but I'm unable to find an official firmware from doogee/homtom's site for the HT3. I've found a firmware that I downloaded from "chinagadgetsreviews" but I'm a bit weary to try and flash with that rom because it isn't from the manufacturer. (even if I knew how to - the only experience I have is rooting my own phone but that's when I actually had access to a working phone, not one thats stuck on a boot logo).
Sorry for the long post but could anyone guide me in the right direction here? TIA
I'm not opposed to not using official firmware, I think I use cyanogen mod(?) on my own phone. I'd just like the problem fixed in the easiest way possible.
Trying to fix it myself by flashing a rom via SP flash tools but I've ran into another problem which is stopping any kind of progress - the phone isn't detected in Windows, I can't enable usb debugging because I can't get passed the boot loop, I've tried installing the ADB driver manually which didn't seem to work (just said it didn't install correctly and left me with a yellow exclamation mark) and I tried to install it automatically via ADB driver installer but it just throws up an error that the device isn't detected.
Any help would be greatly appreciated.
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Same here - any solution for this problem?
Kleos89 said:
Hello. I bought a Homtom HT3 and next day a done an update with sp flash tool. all gone ok, but phone now wont to turn on. I contact homtom and got all drivers and room to fix it. Now i have a problem , i hit download on flash tool , take off battery + pres volume down + conect phone on usb cable. My computer detect it as USB MTK PORT sp flash tool load only the first red line but not detecting phone info, then after 1 minute i get
s_ft_da_no_response(4001) da didn't send response data to flash tool.
I changed drivers port even to MTK preloader, but i get same error.
NOTE....... All drivers and rom i got original from HOMTOM.
Thanks to all who can help me.
I can show a screenshot if need.
Click to expand...
Click to collapse
Hey, its my first post here
I have a Trouble
this morning, I tried to isntall CM13, before I complete the download, tried to install bootloader, i dont remenber the name
I reboot the android
and fall of on a looping of LG logo screen, I pluged on PC windows, install LG Mobile support tool, he reconize my device, only... and say my OS is on the last Update
I tried everything
Take off batery, press the butons to make anything
And I have the Idea to enter in the emergency mode
with this I can download the driver, and windows reconize my device...
I tried ADB
but he dont reconize the device
Anyone can help? I have a CM13 here, for my device, and my PC...
Hello everyone,
My dad has a Lg Leon H340F, which I tried to update without success to Android Marshmallow I followed the post "How to update LG Leon H340N to Android M and Unlock the Bootloader"
The first time I flash it, the tool showed that it was completed successfully but the phone didn't turn on, it was in a bootlop,
I thought I had done something wrong, so I tried again,
the second time the phone showed "COM5" while was flashing, the tool again showed the process was successfully completed but the phone was still in a bootloop, it no longer allowed me to enter the download mode,
When I connected it to the computer by pressing the volume down button, the charging icon appeared, the LG Flash Tool program no longer recognized it.
When I turned it on normally and while it was in the bootloop I connected it to the computer, it emitted the sound that something had been connectedt, but the LG Flash Tool did not recognize it either.
I thought all was lost,
I decided to try it with the official tool LG Mobile Support Tool, It did not recognize it either,
Then I realized that there was an option called "recovery error update" in which I was asked for the IMEI number, I entered it, and later it began to download the firmware, and was successfully installed on the smartphone.
Now he's alive, with lollipop, but alive.
I do not know if it will work in other cases, but give it a chance.