Can any one plz suggest me a custom ROM or what mods can I make to andi 4.5 k6 which is a mt6572 device ?
Sent from my Andi4.5K6 using xda app-developers app
Unfortunately i cant find any MT6572 kernel for Andi K6, otherwise i would have done creating a fast and smooth ROM for you...
f_u_006 said:
Unfortunately i cant find any MT6572 kernel for Andi K6, otherwise i would have done creating a fast and smooth ROM for you...
Click to expand...
Click to collapse
can't u build one on stock kernal ? And can you suggest any custom recovery for this device ?l
Sent from my Andi4.5K6 using Tapatalk HD
yuvrajsonawane said:
can't u build one on stock kernal ? And can you suggest any custom recovery for this device ?l
Sent from my Andi4.5K6 using Tapatalk HD
Click to expand...
Click to collapse
In your PC, download this,
uploaded.net/file/d2w6dl7r
extract it, turn on USB debugging in your setting (If your ICS you can turn it on in developer setting or if your Jellybean 4.2 or above then go to about phone and and tap build number 11 times then the developer option is enabled in settings.
Backup your Data and run Runme.bat and select Normal mode.
If your root was successful then you will se SuperSU app in your menu,
Now use this guide to install ADB + Fastboot in your device
dottech.org/21534/how-to-install-adb-and-fastboot-on-your-windows-computer-for-use-with-your-android-phone/
If you did this all successfuly then i will tell you how to install a recovery.
f_u_006 said:
In your PC, download this,
uploaded.net/file/d2w6dl7r
extract it, turn on USB debugging in your setting (If your ICS you can turn it on in developer setting or if your Jellybean 4.2 or above then go to about phone and and tap build number 11 times then the developer option is enabled in settings.
Backup your Data and run Runme.bat and select Normal mode.
If your root was successful then you will se SuperSU app in your menu,
Now use this guide to install ADB + Fastboot in your device
dottech.org/21534/how-to-install-adb-and-fastboot-on-your-windows-computer-for-use-with-your-android-phone/
If you did this all successfuly then i will tell you how to install a recovery.
Click to expand...
Click to collapse
I have my phone rooted and I have installed superuser ! What next to do ?
Sent from my Andi4.5K6 using Tapatalk HD
And what recovery do u suggest
Sent from my Andi4.5K6 using Tapatalk HD
yuvrajsonawane said:
I have my phone rooted and I have installed superuser ! What next to do ?
Sent from my Andi4.5K6 using Tapatalk HD
Click to expand...
Click to collapse
Download the Adb and Fastboot in the given link and install it, after installing it go to the installed folder hold Shift + Right click and select Open windows command prompt here, then turn off your mobile to fastboot mode, It can be done by turning off the phone and holding Volume Up button while connecting the USB port to the PC, You must have fastboot drivers installed (Well... Google it or possibly it will come with your original mobile drivers as you may've installed before)
After you did this all in the Folder open command prompt type: "fastboot devices" without quotation and you will see your devices code or number in the command prompt window, now download this
https://docs.google.com/file/d/0B5OYTnbjVEkfYmlCWWlJMV9rbTA/preview
rename it to boot.img
and extract it in the adb folder and type: "fastboot flash boot boot.img"
in windows command prompt when done now type "fastboot reboot" and after a successful reboot disconnect your devices and you will have Recovery installed in your phone.
(WARNING: THIS KERNEL IS ONLY FOR MT6572, FLASH IT AT YOUR OWN RISK AND I AM NOT RESPONSIBLE FOR WWIII)
---------- Post added at 11:34 AM ---------- Previous post was at 11:30 AM ----------
If you really crave for Custom ROM then
visit this page and follow the easiest tutorial to edit or ceate your very own ROM, you can edit your mobile is ROM with new animation and stability and later you can flash it in your own phone.
Hit Thanks if these all helped you.
forum.xda-developers.com/showthread.php?t=2195858
f_u_006 said:
Download the Adb and Fastboot in the given link and install it, after installing it go to the installed folder hold Shift + Right click and select Open windows command prompt here, then turn off your mobile to fastboot mode, It can be done by turning off the phone and holding Volume Up button while connecting the USB port to the PC, You must have fastboot drivers installed (Well... Google it or possibly it will come with your original mobile drivers as you may've installed before)
After you did this all in the Folder open command prompt type: "fastboot devices" without quotation and you will see your devices code or number in the command prompt window, now download this
https://docs.google.com/file/d/0B5OYTnbjVEkfYmlCWWlJMV9rbTA/preview
rename it to boot.img
and extract it in the adb folder and type: "fastboot flash boot boot.img"
in windows command prompt when done now type "fastboot reboot" and after a successful reboot disconnect your devices and you will have Recovery installed in your phone.
(WARNING: THIS KERNEL IS ONLY FOR MT6572, FLASH IT AT YOUR OWN RISK AND I AM NOT RESPONSIBLE FOR WWIII)
---------- Post added at 11:34 AM ---------- Previous post was at 11:30 AM ----------
If you really crave for Custom ROM then
visit this page and follow the easiest tutorial to edit or ceate your very own ROM, you can edit your mobile is ROM with new animation and stability and later you can flash it in your own phone.
Hit Thanks if these all helped you.
forum.xda-developers.com/showthread.php?t=2195858
Click to expand...
Click to collapse
I when to the fast recovery and flashed the recovery u gave me and Boom ! it is soft bricked now
I now it was on my own risk but the mobile was going till iball logo and then reboot ! BOOTLOOP :crying:
I submitted the phone next day to the service center but and called them today but they said today that mobile is not detectable and thats y they cant repair it so they are sending it to the head office :crying:
how can't they detect the phone for reinstalling the software ?
yuvrajsonawane said:
I when to the fast recovery and flashed the recovery u gave me and Boom ! it is soft bricked now
I now it was on my own risk but the mobile was going till iball logo and then reboot ! BOOTLOOP :crying:
I submitted the phone next day to the service center but and called them today but they said today that mobile is not detectable and thats y they cant repair it so they are sending it to the head office :crying:
how can't they detect the phone for reinstalling the software ?
Click to expand...
Click to collapse
I am sorry that i almost searched the whole day to find that kernel but it didn't worked...
Well.... hope you get your cell fixed soon.
Hey! its soft bricked!
you can fix it yourself, now download your firmware from iball or someother site and extract the kernel (boot.img) from it and flash it using the fastboot.
I lost my Recovery
Can anybody provide me with the Stock Recovery. I tried flashing this recovery and ended up losing the GSM signal as well as the recovery.
i have the stock boot.img for it
helow i ve sucessfully created a ctr v2.5(cwm 6.x.x based) recovery and a custom rom for iball andi k6
Sent from my Andi4.5K6 using XDA Free mobile app
Can you upload recovery for k6.....
Sent from my iball4.5d Quadro
Unable to root iBall andi 4.5k6+ with almost all available apps.....how to root it it has kitkat 4.4.2 arm v7 (revised3)
Sent from my iball4.5d Quadro
is ur your phone different from iball 4.5 k6 or its just the updated OS version of k6?
kekuo said:
is ur your phone different from iball 4.5 k6 or its just the updated OS version of k6?
Click to expand...
Click to collapse
My phone is iBall Andi 4.5K6+ and it has Kitkat 4.4.2....I root this phone but not getting success to boot in cwm/twrp recovery. I flashed recovery sent by you but no .....it boot in stock recovery only.....
Sent from my iball4.5d Quadro using Tapatalk 2
so u mean u have rooted your device? if yes den u download Carlive Touch Recovery ctr v2.4 or 2.5 and install in your pc,install drivers and run the application it will automaticalky install recovery in your phone
No ...not useful ctr2.4 it says not for kitkat devices.....
Sent from my iball4.5d Quadro using Tapatalk 2
i need ur help plzzzx
hi i m steven n need ur help plszzzzz reply me on whatsapp my no is +917776947248
hey i hv rooted my phone n hv install cwm but bymistakely lost my system plzzx
i need ur phone backup plzzzz bro msg me:crying:
Related
Rooting MediaTek MTK6589 phones without Flash Tools:-
EDIT: Just use Framaroot. Simple. No PC required. http://forum.xda-developers.com/showthread.php?t=2130276. Just install the App and use one of the exploits.
*You can ignore this* OLD METHOD: (use this if you have a lot of time to waste )
Get "Motochopper, developed by djrbliss" for rooting Motorola devices. It works on most devices running Jelly bean 4.1 and above.
Original post (requires logging in) / Thread on XDA / # Alternate Download (Mirror)#
Here's what you need before you Root.
1. Any Phone with MediaTek MTK6589 Processor and Jelly Bean 4.1+
2. Drivers for ADB (connects the pc with the phone through USB Debugging) - there are many sources to get these drivers. If you're running the stock micromax firmware, it's found onboard when you connect the usb. For others running custom firmware, you could download from moulnisky.com. Even windows update might automatically install these drivers for you, but it's time consuming. After you've installed this, proceed to the next step to find out if you've established a proper connection between phone and pc.
3. Connect the phone to PC via USB cable and run the motochopper (run.bat file). press ok. then connect the phone to pc and enable USB debugging from the developer tools. Now the tool should push the exploit and root your phone. if no device is detected, go back to step two and install the correct drivers. if it's done, you're a superuser.
Note: In Android 4.2, Developer Tools will be hidden by default. You'll have to enable it first. For that, Go to Settings > About Phone > Build Number > Tap 7 Times.
Wanna Unroot and go back to Normal user?
SuperSu > Settings > Full Cleanup and Manually Reboot.
Installing Custom Recovery:-
This is a Must-if you have a rooted phone. Install a custom recovery before you start changing any system files. this will come in handy in case you mess up your phone and stuck in bootloop. It is commonly used for installing unofficial firmwares and also for backing up your perfectly working firmware.
To install a Custom Recovery, follow these steps. ( Root permissions needed )
1. Root the phone (refer above).
2. Download Mobileuncle MTK Tools from the Play Store.
. Download a Custom Recovery of your choice and place it on your external SD card without any folders. the recovery image file must have the word recovery in it for the app to detect it. i.e twrprecovery,recovery-twrp,etc.. so whatever sources you get the recovery image from, rename it accordingly.
Clockworkmod and TWRP are the most commonly used custom recoveries. It's up to you to decide which one you're installing. TWRP vs Clockworkmod: Which custom recovery is the best?
TWRP Custom Recovery
Clockworkmod Custom Recovery
3. Now run Mobileuncle Tool. Recovery Update > You'll find the recovery image there. Select and confirm to install. Done.
More info: Backups taken with clockworkmod don't work with twrp. so choose your family wisely.
Re-installing the Stock Recovery:-
If you want to revert to the Stock Recovery at some point due to some reason, HERE is the stock recovery taken from the stock firmware. You can flash it through Mobileuncle just like you flashed custom recovery.
Launching the Phone in Recovery mode:-
Switch off the Phone and wait till it's completely off. Pressing Volume Up + Power will enter the Recovery mode.
Factory Restore:-
Wanna Upgrade to a Newer version of Android ? or Have you just messed up your Phone ? Worry-Not. Here's the solution for all your problems. As the saying goes " A MediaTek Phone can never be Hard-bricked ". It can only be Soft-bricked and then it's easy to resurrect it back from the Dead with SmartPhone Flash Tool.
Here's what you need:
1. Micromax Micromax Canvas HD (I'm not sure if this firmware will work with any variants of this Device.)
2. The Latest Firmware for Micromax Canvas HD: S9201_4.2_MP_F3F8_B1_IN_MMX_14_FLASHER_USER (Android 4.2.1 Jelly Bean, Released on 18-October-2013)
3. Download the latest version of Smart Phone Flash Tools: Download v3.1312.0.139
4. MediaTek PreLoader USB VCOM Port Drivers - (Download) - This is the most important part. If you don't install these drivers, SP Flash Tools will not work.
Note: these aren't the same drivers that comes with the Phone or those Unsigned Drivers provided by many sources. These are signed drivers and works with all versions of Windows (includes 7,8 x64 versions)
How to install: Don't download the first file (it's just an installer). Get the two other files which are the Drivers. Keep them in a folder and extract them. You will have two .inf files. Right click on both of them and install. Simple.
5. After downloading all the required files and installing the drivers, power off your phone completely and remove the USB cable. Now remove the battery from the phone.
6. Extract the zip file containing the micromax firmware to some folder and then run SP Flash Tools. Now select the Scatter-Loading File which is inside the extracted folder named as "MT6589_Android_scatter_emmc". Press Download and connect the USB cable to the phone (without battery). It takes around two minutes to complete. Removing it mid-way will only mess-up the phone. After a Green circle is shown on screen, you can remove the cable and turn on the phone. That's all.
Note: If you're upgrading from Android 4.1 to 4.2, for the first time, You might enter an app called TP Upgrade that will run on the first boot. It's a Nice app. It upgrades your TouchPad drivers to the latest version and will ask for confirmation.but the thing is "DON'T TOUCH ANYTHING ON YOUR SCREEN WHILE IT'S THERE (NOT EVEN THE OK BUTTON)". It will start by it's own and completes in around 5 minutes approximately. If you accidentally touch the screen, your TouchPad will stop working. Now, Don't Panic. Welcome to the League. Now remove the battery from the phone and restart. You should see the same TP Upgrade coming up again. Have some snacks and don't do what you did last time. It'll be fine.
Credits:-
djrbliss for motochopper
suhas.holla for the clockworkmod recovery
kumar abhishek for the twrp recovery port.
www.moulnisky.com
Don't forget to hit that thank button.
Its works
salaigeethan666 said:
I just found out the simplest method to root the Micromax A116 Canvas HD.
This method is not yet popular among many Canvas HD users. But this one works without the need for any custom recovery. So you don't have to go through those complex procedures trying to install usb drivers for your device or removing the battery and connecting the usb. I tested this method and it works flawlessly.
Here is the link to the site that provided it.
(add http here)droidchina.com/forum/Thread-Rooting-MT6589-HDC-Galaxy-Android
(I can't post outside links because I'm new)
Click to expand...
Click to collapse
This worksss....man....thank you.So easy.Installed drivers connected the phone and ran the bat file and done.Even checked via root checker.
Its rooted but u can access the recovery options
Sent from my Micromax A116 using Tapatalk 2
shub_hi said:
Its rooted but u can access the recovery options
Sent from my Micromax A116 using Tapatalk 2
Click to expand...
Click to collapse
Yea. I'm trying to install Clockworkmod too.
I tried pushing the recovery through Adb. but it failed.
i'll have to find some other way to install.
salaigeethan666 said:
Yea. I'm trying to install Clockworkmod too.
I tried pushing the recovery through Adb. but it failed too.
i'll have to find some other way to install.
Click to expand...
Click to collapse
Yah.....need to inst CWM recovery as we cant access the stock recovery
this is what I get when I try to install in through terminal emulator.
Code:
>su
>flash_image recovery /sdcard/recovery.img
>error scanning partitions: Invalid argument
Even the video in YouTube uploaded by cursed4eva.com....that process don't work too.
Sent from my Micromax A116 using Tapatalk 2
salaigeethan666 said:
I just found out the simplest method to root the Micromax A116 Canvas HD.
This method is not yet popular among many Canvas HD users. But this one works without the need for any custom recovery. So you don't have to go through those complex procedures trying to install usb drivers for your device or removing the battery and connecting the usb. I tested this method and it works flawlessly.
Here is the link to the site that provided it.
(add http here)droidchina.com/forum/Thread-Rooting-MT6589-HDC-Galaxy-Android
(I can't post outside links because I'm new)
Click to expand...
Click to collapse
how to unroot it back
How to Unroot?
Mahisasur said:
how to unroot it back
Click to expand...
Click to collapse
SuperSu > Settings > Full Cleanup
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
salaigeethan666 said:
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
guys need and conformation from you all....before rooting and installing CWM, i mean to say when u first baut the fone......did you got the access to recovery? I have an peculier prob from the 1st day.....i could enter recovery but could not select any options.just below the recovery i a picture of a green bot is placed with keybord sign and above that bot there is a exclamation mark in a triangle. Please suggest.
Click to expand...
Click to collapse
what if i dont install custom recovery after rooting
salaigeethan666 said:
SuperSu > Settings > Full Cleanup
It works. I ran Root Checker afterwards to confirm it.
Click to expand...
Click to collapse
what if i dont install custom recovery after rooting. is this necessary to install cwm and what it actually does.
i am new to this android rooting thing. but i want to swap storage of my canvas hd to play hd games... please help me.
Re: Micromax Canvas HD A116 [Rooting without a Custom Recovery + Installing Recovery]
shub_hi said:
salaigeethan666 said:
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
guys need and conformation from you all....before rooting and installing CWM, i mean to say when u first baut the fone......did you got the access to recovery? I have an peculier prob from the 1st day.....i could enter recovery but could not select any options.just below the recovery i a picture of a green bot is placed with keybord sign and above that bot there is a exclamation mark in a triangle. Please suggest.
Click to expand...
Click to collapse
No. I see what you are talking about. The stock recovery will not work in Canvas HD. Everyone has that problem.
Mahisasur said:
what if i dont install custom recovery after rooting. is this necessary to install cwm and what it actually does.
i am new to this android rooting thing. but i want to swap storage of my canvas hd to play hd games... please help me.
Click to expand...
Click to collapse
It's not necessary. You should install it only if you love to flash custom ROMs (Customized Android versions) to your phone. You can flash unofficial android versions to your phone with it. It also allows you to make a backup of your stock ROM which you can't with the stock recovery. You should always make a backup of your stock android to make sure you can always reset your phone back to normal whenever something bad happens (that is if you brick your phone trying to install a ROM).
If you only looking for swapping the memory cards, root is more than enough. Look at this Guide for instructions.
http://forum.xda-developers.com/showthread.php?t=1991583
Thanks i appreciate your help.
Sent from my Micromax A116 using xda app-developers app
Its workssssss
salaigeethan666 said:
I just installed Clockworkmod.
http://forum.xda-developers.com/showthread.php?t=2290174
Sent from my Micromax A116 using xda app-developers app
Click to expand...
Click to collapse
The link provided above just worked flawlessly.......awesome....thank you both
Worked like a charm
worked perfectly normal like mentioned. Actually, i had successfully installed CWM, but after installing superuser zip files via CWM my phone got stuck in bootloop mode. Had to restore the stock ROM and then installed CWM again, After that tried your method and it worked. Proud owner if rooted A116 now Thank you for sharing the info!
hd rooted
thanks man its works for me a lot.....
finally my canvas hd rooted yo
i swap memory by this method
Default camera app needed
Can someone please upload the default camera app of Micromax a116?
I think I deleted it accidentally... :crying:
P.s. - Im using stock rom with NO modifications except root and CWM
I deleted the video player app and gallery app, maybe that was bundled with the camera app :-/
thank you
salaigeethan666 said:
Root Micromax Canvas HD A116
(without installing Custom Recovery)
Most Guides talk about using SP Flashing Tools to flash the Custom recovery and then rooting the phone. But Here we root the phone first and then install Custom recovery. This method is much easier. You don't have to install any Custom recovery to root your Canvas HD. Which means, you don't have to go through those complex procedures trying to install usb drivers for your device or removing the battery and connecting the usb. I used Motochopper by djrbliss to root my Canvas HD. I didn't face any problem. so it works. Here is the link
http://hdcgalaxy.com/2013/04/root-tutorial-hdc-galaxy-android-mt6589.html
How to Unroot?
SuperSu > Settings > Full Cleanup and Manually Reboot. It will be gone. I tried it and works.
Credits:-
djrbliss for making motochopper - Original link
Install Custom Recovery after rooting
Download "Mobile Uncle Mtk Tools" from the Play Store and use it's Recovery Update feature to install Custom Recovery directly from your mobile. For more details, follow instructions here
Tips and Tricks:-
How to Swap internal and external Memory Card - link
Although your phone is powerful enough to run high definition games, the manufacturer has provided little space to install any such games. Your internal memory of 2Gb storage fills up as soon as you install something like Need for Speed Most wanted. So the first thing you must do after rooting the phone is swapping the memory cards. Insert a 16Gb external memory card and use this trick to transform the external memory card into internal memory. Now you can have six hd games at the same time on your phone
Installing Adobe Flash Player - (Download Apk/View Source)
Hit Thanks if i helped you
Click to expand...
Click to collapse
thanks a million man , was able to root my canvas with this method, with your guidance ofcourse, moborobo installed the necessary drivers, and motochoper worked as a charm....... thanks again man...... cheers
Stuck in stock recovery
Problem i have is the stock recovery sucks i cant enter any option by pressing both keys right context menu + back key simultaneously
nothing happens and the method from cursed4eva works for me does any one know how to select the highlighted option in stock recovery ? because i am stuck
Hi all , yeasterday i was updateing my recovery to 6.0.2 then as soon as i had started update , there was a message error tell me "faild" , then i rebooted my mobile and i dosen't work or do any thing .
what should i do ?! help me ,please?
LahKeda said:
Hi all , yeasterday i was updateing my recovery to 6.0.2 then as soon as i had started update , there was a message error tell me "faild" , then i rebooted my mobile and i dosen't work or do any thing .
what should i do ?! help me ,please?
Click to expand...
Click to collapse
Flash stock rom... it shud fix it...
how to use it ?
how can I use it ???
What mobile do you use?
Did you try to boot into bootloader ... fastboot and flash the old recovery?
Sent from my MID using xda app-developers app
reply
smack67 said:
What mobile do you use?
Did you try to boot into bootloader ... fastboot and flash the old recovery?
Sent from my MID using xda app-developers app
Click to expand...
Click to collapse
i use samsung galaxy star GT-S5282 and i tried to start in recovery mod or update mode but my phone isn't response ?!
and i tried "flash stock rom" but every method need to get in recovery mode or update mode
You first should start into fastboot and flash the old recovery - just downgrade it
I had the same on my mobile... downgrading recovery helped
Sent from my MID using xda app-developers app
erere
smack67 said:
You first should start into fastboot and flash the old recovery - just downgrade it
I had the same on my mobile... downgrading recovery helped
Sent from my MID using xda app-developers app
Click to expand...
Click to collapse
how can i downgrade it ? if you and any one have free time , please , enter to my PC by team viewer and do it for me ?
It's really easy....
Search the xda for fastboot, download this file for your system (windows or linux) - install the device-drivers (Windows only)
then plug in your mobile and reboot into bootloader... fastboot
Open terminal or Cmd - test if your mobile is connected by typing in "fastboot devices" in the path where fastboot is placed
If it doesn't say "waiting for device" you are conneced
Download the cwm recovery for your device and copy it to the path where fastboot is placed
Then type in "fastboot flash recovery *name of your downloaded recovery-file*"
Wait if the prompt is back - usually some seconds only
Done
Reboot bootloader ... start recovery ... flash your ROM ...
Done too
Sent from my MID using xda app-developers app
a
smack67 said:
It's really easy....
Search the xda for fastboot, download this file for your system (windows or linux) - install the device-drivers (Windows only)
then plug in your mobile and reboot into bootloader... fastboot
Open terminal or Cmd - test if your mobile is connected by typing in "fastboot devices" in the path where fastboot is placed
If it doesn't say "waiting for device" you are conneced
Download the cwm recovery for your device and copy it to the path where fastboot is placed
Then type in "fastboot flash recovery *name of your downloaded recovery-file*"
Wait if the prompt is back - usually some seconds only
Done
Reboot bootloader ... start recovery ... flash your ROM ...
Done too
Sent from my MID using xda app-developers app
Click to expand...
Click to collapse
the big problem that the mobile isn't work it's turned off and i can't turn it on after i was updateing the recovery so any way depend on that the
mobile is turn on not working and if i tried to open mobile in recovery or updateing mode , i have got any result and mobile is still working so tell my way that not depend on the mobile is turned on
Hi
as long as I know mobiles there is no way to flash anything without booting up to fastboot. You need energy to do something with it. Your car won't run without fuel too!
But did you check your battery? You might charge it with a different wire or/and charger (yours might be defect)!
As soon as this is checked you will know if your mobile is dead or still alive.
You have to know: to flash the wrong recovery usually cannot break your device. I dit it twice and my HOX still is running properly.
This is why I ask for your battery - you need more than 30% battery life for a secure flash!
If it works you have to boot up into bootloader and check the Code name of your device. Only with this you can find and flash the matching recovery and ROM for your device.
If nothing works you might give it to a professional for a try to repair it.
Sent from my MID using xda app-developers app
thanks
smack67 said:
Hi
as long as I know mobiles there is no way to flash anything without booting up to fastboot. You need energy to do something with it. Your car won't run without fuel too!
But did you check your battery? You might charge it with a different wire or/and charger (yours might be defect)!
As soon as this is checked you will know if your mobile is dead or still alive.
You have to know: to flash the wrong recovery usually cannot break your device. I dit it twice and my HOX still is running properly.
This is why I ask for your battery - you need more than 30% battery life for a secure flash!
If it works you have to boot up into bootloader and check the Code name of your device. Only with this you can find and flash the matching recovery and ROM for your device.
If nothing works you might give it to a professional for a try to repair it.
Sent from my MID using xda app-developers app
Click to expand...
Click to collapse
ok , smack67 , before i updated recovery , i had charged battry to 100% so i don't think that battry is the reason
but it doesn't work also :silly:
but i rememberd some thing , there was rom for andriod 4.4 for galaxy mini in my card and while i was update recovery i chose by rwong the galaxy mini rom instead of the recovery image and while install the rom it told me faild then i chose the recovery image and install it and told me faild also .
so what are you say the problem can be from wrong rom or what ?1
i attached video about problem
http://www.youtube.com/watch?v=ZS9_mozA6ZQ&feature=youtu.be
LahKeda said:
ok , smack67 , before i updated recovery , i had charged battry to 100% so i don't think that battry is the reason
but it doesn't work also :silly:
but i rememberd some thing , there was rom for andriod 4.4 for galaxy mini in my card and while i was update recovery i chose by rwong the galaxy mini rom instead of the recovery image and while install the rom it told me faild then i chose the recovery image and install it and told me faild also .
so what are you say the problem can be from wrong rom or what ?1
i attached video about problem
Click to expand...
Click to collapse
u should flash the stock rom using odin and booting ur phone in download mode which can be done by holding the home and vol dwn buttons and powering up the phone.
this way also not working
Uhhh that sounds really bad - my ideas are off. You should search the forum for "unbrick device". As soon as you installed an unmatching ROM, your boot.img is the wrong now. That's a piont where I cannot help. Too less experiences.
Sorry
Sent from my MID using xda app-developers app
Thanks
smack67 said:
Uhhh that sounds really bad - my ideas are off. You should search the forum for "unbrick device". As soon as you installed an unmatching ROM, your boot.img is the wrong now. That's a piont where I cannot help. Too less experiences.
Sorry
Sent from my MID using xda app-developers app
Click to expand...
Click to collapse
Thanks to every one that help me , i'm sorry for tired you all good bye
Be sure that i love to help as good as i can!
Sent from my MID using xda app-developers app
LahKeda said:
Hi all , yeasterday i was updateing my recovery to 6.0.2 then as soon as i had started update , there was a message error tell me "faild" , then i rebooted my mobile and i dosen't work or do any thing .
what should i do ?! help me ,please?
Click to expand...
Click to collapse
its totally dead or wat?? what error shows your phone??
dashingdwivedi said:
its totally dead or wat?? what error shows your phone??
Click to expand...
Click to collapse
it's totally dead and not working at all , but at all i sent it to samsung care to fix it so thanks very much :good::good::good::good:
Dear
Is there any custom rom kitkat based for karbonn titanium s1 plus?
How we remove the apps from custom rom and how we rebuild it.
thanks in ad
ClockWorkMod Recovery 6.0.4.9 - Download
Terminal Emulator - Download
Place it in /sdcard and rename the file recovery.img
Run the terminal emulator and
type: su (press enter)
Then type: dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (press enter)
CyanogenMod 11 [Kitkat 4.4.4] - Download
Password: fxpj
Download This package
Extract it to sd card
Boot into Recovery by Powering on while holding power and vol+ Button.you'll see a green screen...Keep holding untill the screen turns red.
Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
Goto Advanced and format Dalvik Cache
Select Apply Zip from SD Card
Select Cyanogenmod 11 zip file of rom to install and wait.
Dear
thanks for reply
I have not rooted the phone. Can i flash CyanogenMod 11 [Kitkat 4.4.4] and ClockWorkMod Recovery 6.0.4.9,
Terminal Emulator without rooting the phone?
If i rooted the phone and flash CWM and ROM Manager then Terminal Emulator is necessary to install.
please explain.
thanks
Rooting?
desiboyz said:
Dear
thanks for reply
I have not rooted the phone. Can i flash CyanogenMod 11 [Kitkat 4.4.4] and ClockWorkMod Recovery 6.0.4.9,
Terminal Emulator without rooting the phone?
If i rooted the phone and flash CWM and ROM Manager then Terminal Emulator is necessary to install.
please explain.
thanks
Click to expand...
Click to collapse
Did you managed to root the phone? how?
Hey im just rooted my device successfully. Can i upgrade my rom using built in system updater? There is option to upgrade from sd card.
Sent from my Titanium S1 Plus using XDA Free mobile app
nanachitang420 said:
Did you managed to root the phone? how?
Click to expand...
Click to collapse
hii just download the android kingo rom google any root any phone :laugh::laugh::laugh::laugh:
Sippay said:
ClockWorkMod Recovery 6.0.4.9 - Download
Terminal Emulator - Download
Place it in /sdcard and rename the file recovery.img
Run the terminal emulator and
type: su (press enter)
Then type: dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18 (press enter)
CyanogenMod 11 [Kitkat 4.4.4] - Download
Password: fxpj
Download This package
Extract it to sd card
Boot into Recovery by Powering on while holding power and vol+ Button.you'll see a green screen...Keep holding untill the screen turns red.
Goto Mounts and storage and format /Cache and /Data. Format /SYSTEM if installing new rom.
Goto Advanced and format Dalvik Cache
Select Apply Zip from SD Card
Select Cyanogenmod 11 zip file of rom to install and wait.
Click to expand...
Click to collapse
error no space left on device
Same problem
spice mi 270 said:
error no space left on device
Click to expand...
Click to collapse
I'm also having this problem on my device pls give me a working cwm for titanium s1 plus
THANKS IN ADVANCE
spice mi 270 said:
error no space left on device
Click to expand...
Click to collapse
Are you rooted? Can you extract stock recovery for S1 plus and upload here?
Thanks in advance.
yes i am rooted
nanachitang420 said:
Are you rooted? Can you extract stock recovery for S1 plus and upload here?
Thanks in advance.
Click to expand...
Click to collapse
Yes I have rooted mobile and after flashing cwm from terminal emulator I lost my original recovery and even not got the cwm not working..... please help me...
thanks in advance
Try to extract boot.img..
mkmandar123 said:
Yes I have rooted mobile and after flashing cwm from terminal emulator I lost my original recovery and even not got the cwm not working..... please help me...
thanks in advance
Click to expand...
Click to collapse
Me not rooted but flashed CWM S1 with Fastboot and worst tried to insert files to system.img and even overwrite that partition, in turn the phone is just booting only upto boot logo, If you are in position to extract boot.img then please try and upload here. That can be used to build CWM working for our device. If any body gets flash files for S1 plus from service centre then best. We can easily build CWM.
nanachitang420 said:
Me not rooted but flashed CWM S1 with Fastboot and worst tried to insert files to system.img and even overwrite that partition, in turn the phone is just booting only upto boot logo, If you are in position to extract boot.img then please try and upload here. That can be used to build CWM working for our device. If any body gets flash files for S1 plus from service centre then best. We can easily build CWM.
Click to expand...
Click to collapse
How to go in fastboot mode??
mkmandar123 said:
How to go in fastboot mode??
Click to expand...
Click to collapse
Please check you message box. Have given you the details.
Two ways:
1. ADB way. Start adb after connecting phone to PC and type adb devices. If device is shown Titanium then type in cmd "adb reboot bootloader" phone will reboot in fastboot mode.
2. Key combinations: switch off the phone. Press power button and volume up button simultaneously till you see boot logo. connect to PC and see in device manager, you will see a device called Karbonn bootloader interface under title: Karbonn devices.
Try to extract boot.img as per the method given in message box .
mkmandar123 said:
Yes I have rooted mobile and after flashing cwm from terminal emulator I lost my original recovery and even not got the cwm not working..... please help me...
thanks in advance
Click to expand...
Click to collapse
how did u managed to flash cwm,can u plz explain the steps bcoz m getting error that no space left on device and yup m rooted need cwm recovery any how...plz anyone help
---------- Post added at 11:48 AM ---------- Previous post was at 11:42 AM ----------
nanachitang420 said:
Are you rooted? Can you extract stock recovery for S1 plus and upload here?
Thanks in advance.
Click to expand...
Click to collapse
Yes m rooted but dont know how to extract stock recovery,tell me steps I will surely upload it
Got recovery.img and boot.img for S1 plus
I got boot.img and recovery.img for S1 plus now need only cwm or twrp developer...hoping for best..anyone reply asap
Sent from my Titanium S1 Plus using XDA Premium 4 mobile app
titanum s1 plus
spice mi 270 said:
I got boot.img and recovery.img for S1 plus now need only cwm or twrp developer...hoping for best..anyone reply asap
Sent from my Titanium S1 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hii i need a stock recovery image.
because iam earese it from my phone when flashing another cwm which is not for titanium s1 plus
thanks
shivkiran9 said:
hii i need a stock recovery image.
because iam earese it from my phone when flashing another cwm which is not for titanium s1 plus
thanks
Click to expand...
Click to collapse
Download from here. Contains both, stock boot.img and stock recovery.img. Thanks to Spice mi for providing them!!
Bro its my old phone name spice mi 270,my name is Shivam
Sent from my Titanium S1 Plus using XDA Premium 4 mobile app
Hiii...
Is there any 1 custom rom for s1 plus???
I tried with cynogenmod 11 which provided in previous messages in this forum but it gives some errors..
Sent from my Titanium S1 Plus using XDA Free mobile app
akshykhade said:
Hiii...
Is there any 1 custom rom for s1 plus???
I tried with cynogenmod 11 which provided in previous messages in this forum but it gives some errors..
Sent from my Titanium S1 Plus using XDA Free mobile app
Click to expand...
Click to collapse
For rom we need recovery frst
Sent from my C6603 using XDA Premium 4 mobile app
---------- Post added at 06:17 PM ---------- Previous post was at 06:16 PM ----------
For rom we need recovery frst
Sent from my C6603 using XDA Premium 4 mobile app
Im successfuly root my hp tab with help off vroot.. But every reboot tablet automatic factory reset and all data,apps remove any solution?????????
Anyone port cwm aosp base ROM
Where is cwm recovery ???????
Anyone try
Source Code for 1301 7 HP tab,,
http://h20392.www2.hp.com:80/openso...&e=true&fam=Tablet+PCs&prd=HP_7_Plus_13XX-OSP
Solution
rakshakb said:
Im successfuly root my hp tab with help off vroot.. But every reboot tablet automatic factory reset and all data,apps remove any solution?????????
Click to expand...
Click to collapse
I am in the same boat with the factory resets... did you ever find a solution?
Yes, flash update.zip via fastboot adb sideload
Sent from my D2105 using XDA Free mobile app
http://ftp.hp.com/pub/softlib/software12/COL53679/ob-134254-1/update.zip
Sent from my D2105 using XDA Free mobile app
infidellife said:
I am in the same boat with the factory resets... did you ever find a solution?
Click to expand...
Click to collapse
I think in bootloader something that reset after root here is bootloader.fex in update.zip
https://docs.google.com/file/d/0B0hC3FvuMXfEUlFLRG5mTG5lRVU/edit?usp=docslist_api
Sent from my D2105 using xda Forum
Here is boot.img
https://docs.google.com/file/d/0B0hC3FvuMXfETzIxVlhuSVlTUGs/edit?usp=docslist_api
Sent from my D2105 using xda Forum
attachments
Update. Zip
ramdisk
Ramdisk
rakshakb said:
Yes, flash update.zip via fastboot adb sideload
Sent from my D2105 using XDA Free mobile app
Click to expand...
Click to collapse
Could you please tell me how to do that?
How flash hp 7 1301 official 4.2
You need. --
1-) computer
2-)update.zip of tablet (country wise)
3-)fastboot minimal pack.exe (Google it)
4-)tablet
After download files install fastboot minimal pack.exe in your computer. Now copy update zip in computer/c/program file/minimal adb folder. Now open tablet setting scroll down about tablet open it. Tap 8 time on build version . you see development option in setting open it and mark usb debging.now open adb fastboot in window. Conect tablet to compute via usb.enter ADB REBOOT RECOVERY press enter.-now tab is restart in recovery mode now select adb sideload in tablet recovery (use volume button and power button for ok). type in adb ADB SIDELODE UPDATE.ZIP. press enter. File will automaticlly send to tablet and install
Now tablet is official ..........
No success
Tried twice using adb sideload with the update.zip file.
Any ideas?
Solutions?
SkipWire said:
Tried twice using adb sideload with the update.zip file.
Any ideas?
Click to expand...
Click to collapse
Tried the steps set out by http://forum.xda-developers.com/showthread.php?t=2422353 with
no success.
The device can be rooted by enabling developer and select USB debug on 1301 device. Installing and running ADB and Impact applications in windows; .
When the device reboots it defaults to factory settings with no root.:silly:
Can you give me the link of hp 7 plus 1301 asian tablet?
please bro if you have the file give me its link
Anonymous222 said:
please bro if you have the file give me its link
Click to expand...
Click to collapse
SkipWire said:
Tried the steps set out by http://forum.xda-developers.com/showthread.php?t=2422353 with
no success.
The device can be rooted by enabling developer and select USB debug on 1301 device. Installing and running ADB and Impact applications in windows; .
When the device reboots it defaults to factory settings with no root.:silly:
Click to expand...
Click to collapse
rakshakb said:
You need. --
1-) computer
2-)update.zip of tablet (country wise)
3-)fastboot minimal pack.exe (Google it)
4-)tablet
After download files install fastboot minimal pack.exe in your computer. Now copy update zip in computer/c/program file/minimal adb folder. Now open tablet setting scroll down about tablet open it. Tap 8 time on build version . you see development option in setting open it and mark usb debging.now open adb fastboot in window. Conect tablet to compute via usb.enter ADB REBOOT RECOVERY press enter.-now tab is restart in recovery mode now select adb sideload in tablet recovery (use volume button and power button for ok). type in adb ADB SIDELODE UPDATE.ZIP. press enter. File will automaticlly send to tablet and install
Now tablet is official ..........
Click to expand...
Click to collapse
Guys, KITKAT is out for HP 7 Plus. I had successfully rooted the tablet on JB with no bootlooping issues but lost root when updated to Kitkat. Plz update your tablets and let us all work together in developing Custom ROMs and Recoveries.
Dom3616 said:
Guys, KITKAT is out for HP 7 Plus. I had successfully rooted the tablet on JB with no bootlooping issues but lost root when updated to Kitkat. Plz update your tablets and let us all work together in developing Custom ROMs and Recoveries.
Click to expand...
Click to collapse
Kitkat is available but it's flawed. Received "update -1" and left in recover mode until I rolled back.:silly:
SkipWire said:
Kitkat is available but it's flawed. Received "update -1" and left in recover mode until I rolled back.:silly:
Click to expand...
Click to collapse
No, it is not flawed. When you flash the zip the first time in recovery, it flashes your bootloader and recovery. Reboots into recovery again showing received update-1. Then choose the zip again. You have to do this 3 or 4 times. Keep on choosing the revovery zip again until it says completed.
Has everyone given up?
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
aakashabhinav said:
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
Click to expand...
Click to collapse
If u have rooted your phone thn download flashify and backup boot img and recovery img from there.. Thn it will be in your sdcard flashify folder
Hope it helps
Regards
my phone was bricked how to solve this problem
my coolpad dazen 1 was bricked after flashing recovery.img after rooted..
and it got error like "download and instal the packag? this may expose the device falt and hidden troubles."
please help it's urgent... :angel:
use bootloader to flash stock recovery
Bibhudutta Das said:
my coolpad dazen 1 was bricked after flashing recovery.img after rooted..
and it got error like "download and instal the packag? this may expose the device falt and hidden troubles."
please help it's urgent... :angel:
Click to expand...
Click to collapse
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Full guide for unbrick dazen 8297L-100
In the attachment there are stock boot and recovery images and link for downloadin the cool comunity batch programe
jaswant singh said:
In the attachment there are stock boot and recovery images and link for downloadin the cool comunity batch programe
Click to expand...
Click to collapse
where is the attachment?? plz help..
bonny1256 said:
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Click to expand...
Click to collapse
Hello Friend,
Please post the download link for the
1 . stock rom
2. stock recovery
3. and the batch program which you have mentioned.
4. dazen 1 adb drivers
and any other resources which you used to bring your dazen out of brick.
Thanks
Finally fixed my dazen 1.....
Ho....ffff......
Finally managed to bring my dazen back to life... Thanks to bonny1256 for the information..
Found the batch script after serching all forums almost searched down all internet..
Used the recovery that i had backed up using flashify.. I will upload the stock recovery and link to the tool. Shortly... Once again thanks to @bonny1256..
---------- Post added at 12:58 AM ---------- Previous post was at 12:54 AM ----------
The recoveries in the zip is for coolpad F1 plus which need to be replaced by the stock recovery of dazen 1...
---------- Post added at 01:27 AM ---------- Previous post was at 12:58 AM ----------
stock recovery: https://drive.google.com/file/d/0By_nubQ5FzzoSnBiSl9JaGR1YW8/view?usp=sharing
Drivers: http://download.yulong.com///DOWNLOAD_INFO/20141203151613244(4).rar
Note:: this tool will temporarily install recovery.. So after reboot flash the recovery with flashify for a properly working recovery in your phone..
regards..
techy97 said:
Finally rooted the phone using Kingroot. Now advancing towards porting a custom recovery for the device. The needed files are stock boot.img and recovery.img of the device. My problem is I have tried all the following ways for their extraction -
1) RomDump script 0.72b by Sebastian404
2) cat proc/mtd
3) log_data to find in which partition the recovery belongs to
But no luck, for all.
anybody, who can help me?
Please don't suggest adb process.
Click to expand...
Click to collapse
Try..
adb shell
cat /proc/partitions
Or
adb shell
ls -al /dev/block/platform/7824900.sdhci/by-name
need to know partition details of dazen 1
bonny1256 said:
i was having the same problem
i tried flashing cwm recovery which was for coolpad f1 plus (as it is same device with qualcomm processor)
and after flashing my device was unable to boot (or stuck on bootloader)
but it can be cured....
you have to download the batch program developed by cool community
and dazen 1 adb drivers
(you will need the stock recovery to put back your device to life)
replace both the given recoveries in the batch program folder with stock recovery and rename it
then enter bootloader mode (both volume buttons+power button)
open batch program on your pc and press 1 and click enter
now connect your device to pc and press vol. up button to continue
and its done.
now I am trying to flash a stable recovery
I am new to Xda so sorry in advance if i missed something
feel free to ask.....
Click to expand...
Click to collapse
hi @bonny1256
plz help me know the system partition of coolpad dazen 1..
run this
adb shell
ls -al /dev/block/platform/7824900.sdhci/by-name
i had used it to dump system.img.. i am stuck in bootloop after ota..
plz run the command and upload screenshot...
thanks..
Please send the boot.img and recovery.img for coolpad dazen 1.
My mail id is [email protected]
Send Image
Send me the stock recovery and the boot image with instructions on how to get stock rom on my dazen1 pls send it at [email protected]
hi my dazen 1 is showing waiting for the device after using all this... can any one please help me to get correct procedure. please share complete procedure with required software and links @ [email protected]
Please help to recover my phone. It was rooted using Kingroot and while installing OTA update it got bricked.
Is any way to flash full rom or firmware in our device
hey guyss,,,
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
---------- Post added at 06:20 PM ---------- Previous post was at 06:16 PM ----------
ArjunrambZ said:
hey guyss,,,
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
we need to start a new team for our phone ,so that development can be started
please comment below if ur interested
thanks
Sent from my Coolpad 8297L-I00 using XDA Premium 4 mobile app
Hi, I have rooted my dazen 1 , now waiting for custom recovery and ROMs to test
vishwasnp said:
Hi, I have rooted my dazen 1 , now waiting for custom recovery and ROMs to test
Click to expand...
Click to collapse
did you root using kingroot ?
Yes, used Kingroot
I am facing lots of issues with call log and sms , they suddenly don't update or become non responsive. Any way to replace them ?