Thanks to our friends in Indonesia, we have the updated 2.2.2 Rom --> odienas and tri_zet
This update has been confirmed to work with:
S7-103, Indonesian version with dual cameras internal/external sdcard
S7-104, US BestBuy/RadioShack version with dual cameras and internal/external sdcard
S7-105, Australian version with dual cameras and external sdcard
Partially working:
S7-101, Austria Mobilkom version - loses camera, GPS?
S7-103, New Zealand - loses GPS?
More Info go ---> http://www.androidtablets.net/forum...d-2-2-2-dual-camera-s7-s7v100r001c98b021.html
Download
http://www.megaupload.com/?d=PVWGU020
http://www.mediafire.com/?9l52jhbl7b09czp
MD5 checksum for updata.app : 74D031FD717D8BF68956EF3F044C8EEB
Update install process:
1. unrar the file, and copy the 'dload' folder to the root directory of a sufficiently large external SDcard formatted to FAT/FAT32 (readable by the S7)
2. turn off the unit, and ensure that you are either plugged in with a battery inside the unit, or that you have enough charge left in your battery
3. turn on, and a progress bar will appear in the middle of the screen. Wait until "OK" is displayed on the screen.
4. turn off the unit by removing the battery and any powerplugs to the S7
5. repeat steps 2,3,4 again. otherwise it will hang at boot screen (instructed by Huawei)
6. Remove the SD card and start the device. If you wish the use the card for the device, remove the firmware files from the SD card before reinserting it.
If the update fails to install, check that your file was properly moved into the SDcard by comparing the MD5 checksum.
The overall process should take less than 15 minutes to complete.
Adobe Flash is not pre install ---> http://www.mediafire.com/?io9d5tkt6mu0k74
To ROOT use SOC ---> http://www.androidtablets.net/forum...ot-official-huawei-s7-android-2-2-builds.html
Thanks!! good job
what's new?
Any idea if this will work with the Telstra T-Touch Tab (Australia)? I'm told on other threads it's identical to the Ideos S7 except without any memorycard soldered onto the board. - and it seems possibly this only has agps too.
What is the latest available offical firmware? Im using S7 bought from Orange PL and mine ver is S7v100R001C98B022-is this the newest one?
Which do you think is the best out of your own experience?
aurionix said:
Any idea if this will work with the Telstra T-Touch Tab (Australia)? I'm told on other threads it's identical to the Ideos S7 except without any memorycard soldered onto the board. - and it seems possibly this only has agps too.
Click to expand...
Click to collapse
It runs just fine on the T Touch mate
hi, Everyone knows if this rom works with the s7-106?
Hello. I've been looking everywhere and I could not find a STOCK ROM for my Coby Kyros MID1125-4G. It happens that I installed ICS from Coby germany, but that slowed the tablet and has many problems with the WIFI, then updated via OTA to JellyBean and the thing was worse. Now I want to return to Gingerbread, but I don't have the stock image. Any of you have a STOCK ROM for this device? I will be very grateful for your help.
goldgil2 said:
Hello. I've been looking everywhere and I could not find a STOCK ROM for my Coby Kyros MID1125-4G. It happens that I installed ICS from Coby germany, but that slowed the tablet and has many problems with the WIFI, then updated via OTA to JellyBean and the thing was worse. Now I want to return to Gingerbread, but I don't have the stock image. Any of you have a STOCK ROM for this device? I will be very grateful for your help.
Click to expand...
Click to collapse
I think I've done pretty much the same as you....my tablet doesn't seem too bad...a bit glitchy maybe but I have no access to the APN settings meaning I can't use 3g. I'm hunting for answers as well.....if you find out anything before me let me know (and vice versa) :fingers-crossed:
I am glad im not the only one been trying to work out how to get the 4g sim card bit working again for the past few months since I did the update to ICS, was hoping the the update to Jellybean would fix it, tho I have a thought about the update if it helps that is when it downloads the update from the coby site it is downloading for the standard 1125 and not the 1125-4g model.
If i find out a solution or any more will let you know.
Solution
DNO1978 said:
I think I've done pretty much the same as you....my tablet doesn't seem too bad...a bit glitchy maybe but I have no access to the APN settings meaning I can't use 3g. I'm hunting for answers as well.....if you find out anything before me let me know (and vice versa) :fingers-crossed:
Click to expand...
Click to collapse
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
kaosmad said:
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
Click to expand...
Click to collapse
Thx for all the great info so far. It allowed me to make my bricked
tablet work again however it seems that I also have problem of the
"Damaged Nand". this message is preventing me from installing CWM after the recovery and
also upgrading to the latest ICS update provided by Coby.
Do you have any idea how to fix this ?? :crying:
Alora said:
Thx for all the great info so far. It allowed me to make my bricked
tablet work again however it seems that I also have problem of the
"Damaged Nand". this message is preventing me from installing CWM after the recovery and
also upgrading to the latest ICS update provided by Coby.
Do you have any idea how to fix this ?? :crying:
Click to expand...
Click to collapse
From what I have read at various places you need to reformat the NAND (internal sd storage) and scan it for errors, this is a know fault as nands like hard drives can have bad sectors, which they write out when originally getting them ready for sale.
Most people recommend hxxp://panasonic.jp/support/global/cs/sd/download/index.html SD Formatter v3 to format it, obviously the coby has to be plugged into your computer to format it.
One note if you have the 3g version of the 1125 with the sim card slot using the coby germany upgrade to ics (or now updated to jellybean) using the updater on their site you wont be able to use the internal 3g sim card slot, this is a known problem to them and they are working on it.
If you need any more help just ask
kaosmad said:
From what I have read at various places you need to reformat the NAND (internal sd storage) and scan it for errors, this is a know fault as nands like hard drives can have bad sectors, which they write out when originally getting them ready for sale.
Most people recommend hxxp://panasonic.jp/support/global/cs/sd/download/index.html SD Formatter v3 to format it, obviously the coby has to be plugged into your computer to format it.
One note if you have the 3g version of the 1125 with the sim card slot using the coby germany upgrade to ics (or now updated to jellybean) using the updater on their site you wont be able to use the internal 3g sim card slot, this is a known problem to them and they are working on it.
If you need any more help just ask
Click to expand...
Click to collapse
Hmm I have dowloaded the SD Formatter 3.1 but it only formates the NAND memory ( flash erase is not suported ) i dont know how to scan for errors, also in FWDN it shows me that the NAND data is:
NAND DATA
( 3235840KB )
Is this ok ?
Also I want to let you know that the original coby germany upgrade to ics I can use the internal 3g sim card slot
I have now the update to ICS but now I dont know how to root and put the market on it, to bad
Did you guys have any luck trying to get APN settings working on your tablet, i mean with the 4.1.1. on?
sorry for my bad english
Is these instructions and the ROM for the 1125 without 3g usable?
If not, is there a tutorial for it and a stock ROM?
To explain:
I must have deleted important files in memory and can't run it any longer. it can not be started.
It is rooted. I would now like to re-flash.
How to get the 1125 in the CWM?
Yes, you can use it. I have also used it to come back to GB.
Alora said:
Thx for all the great info so far. It allowed me to make my bricked
tablet work again however it seems that I also have problem of the
"Damaged Nand". this message is preventing me from installing CWM after the recovery and
also upgrading to the latest ICS update provided by Coby.
Do you have any idea how to fix this ?? :crying:
Click to expand...
Click to collapse
Hi ! I also have the same problem on my MID1125 (without 3G)
...> Damaged NAND.
I forgot to make Step 12 :
12 - click on NAND Data from the block on the right and create file NAND Data.fai
As i read on the internet, the Data.fai File contains the Parition Layout for the NAND Flash. Can someone can make a Data.fai File from his MID1125 Tablet ?
If you do the downgrade steps until step 12, the tablet will not be flashed !
Thank you...
Please, help me. Kyros MID1126.
Hello, my Kyros is a 1126, I realized the process suggested by Kaosmad, but with the rom the Kyros 1125. And it worked, but the format does not match the screen, the touch does not work and some other buttons, I need these files for Kyros 1126, where the "lk.rom" and "mtd.img" if someone can help me , because I can only alert by FWDN_v7 program. From now on, thank you.
Thanks!
kaosmad said:
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
Click to expand...
Click to collapse
The restore went exactly as you described. I loaded the x86 drivers on my W7 PC. Great instructions and many thanks! Jim
correction to error after install
kaosmad said:
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
Click to expand...
Click to collapse
After following the instructions I had an error and it would not boot.. so I did the same again but changed from "default download" to "Low format whole memory before download" (this does remove all your data as the warning states) then followed steps 3 to 13 again you need to do the NAND data.fai again so that it works and I have the stock ROM just added
Pplaystore via sd card.
Additional Support, ROM upgrades via Donation
Ryder663 said:
After following the instructions I had an error and it would not boot.. so I did the same again but changed from "default download" to "Low format whole memory before download" (this does remove all your data as the warning states) then followed steps 3 to 13 again you need to do the NAND data.fai again so that it works and I have the stock ROM just added
Pplaystore via sd card.
Click to expand...
Click to collapse
Excellent support site for all thing Kyros.
tipsters ROM upgrades are fantastic and well worth the recommended donation.
Hello,
I used instrucjion to downgrade android to v.2.3.3. It worked, but after downgrade I can't turn on 3G.
I have 3G option, but when I click on 3G i see all the time "Turning on..." I don't see 3G enable or something else. 3G nor working.
During flashing to android v2.3.3 I have inserted SIM card to tablet :/ Reset to default do not work :/
kaosmad said:
After hours of seraching on the net I now have my kyros 1125-3g back to 2.3.3 and with 3g support
I have uploaded the files needed to hxxp://kaosmad.com/android/mid1125/1125-3g.zip
There is a pdf file with instructions in the zip file but basically this is what you need to do,
0 make sure coby is turned off
1 - unzip the file
2 - install the drivers from the drivers folder (depending on your operating system)
3 - start the program FWDN_V7_v2.13
4 - click on the '...' button
5 - click on files types and change it to all files
6 - select lk.rom and MTD.img and click on open
7 - click on add files
8 - turn on coby by pushing the on button whilst holding the volume up button for at least 8 seconds, till the coby screen says plug in usb cable
9 - plub in usb cable
10 - wait for windows to finish detecting / installing drivers
11 - the FWDN software should now see the coby and show the memory allocation layout on the right side of the software.
12 - click on NAND Data from the block on the right and create file NAND Data.fai
13 - click on start
14 - wait while coby is updated
15 - when the screen says download complete (turns green) disconnect the usb cable
16 - reset the coby using the reset whole on the side with a paperclip or something else that fits in the whole.
17 - Coby should now be back to factory rom
Hope this is of some help
Click to expand...
Click to collapse
little help please!!
hi xda-developers, im just need a little help with my kyros 1125 4gb no 3g, already google my problem but i didnt found anything about hard reset, i dont have the lock code for my tblet and i want to reset it, i tryed the normal way for android but nothing hapen, if any body know a tutorial how to reset my device, please share the information, thank you soo much for ur help
fidodj23 said:
hi xda-developers, im just need a little help with my kyros 1125 4gb no 3g, already google my problem but i didnt found anything about hard reset, i dont have the lock code for my tblet and i want to reset it, i tryed the normal way for android but nothing hapen, if any body know a tutorial how to reset my device, please share the information, thank you soo much for ur help
Click to expand...
Click to collapse
1125-4G rom
Download file from here
https://www.dropbox.com/s/fixhl34x7qr13v6/1125.zip?dl=0
Copy entire 1125.zip folder to desktop
Extract 1125.zip to desktop
Install PdaNetA4170.exe driver ( This should allow you to transfer files with Fastboot )
This is Version 4.17 installer for Windows 8/7/Vista/XP (both 32/64bit)
Extract CWM recovery img_1125 folder to desktop by itself ( Do not remove any files from this folder )
Move zip files from zips folder to micro sd card and insert sd into tablet ( leave these in zip format !! )
coby_gapps.zip
coby_mid1125-seed-0012.zip
Superuser-3.1.3-arm-signed.zip
Also move apks from apks folder to MicroSD card
Uni-init+v1.0.apk
Google_Play_serv.ices-signe.d .apk
Busybox.apk
Link2sd.apk
and
market-helper-2.0-beta.apk ( this will allow spoofing of market for not compatible apps )
Open cmd window
( menu , run , when window opens , enter “cmd” without quotes )
Cd to directory
ie ,
type in window
cd desktop , ( enter )
cd CWM recovery img_1125 ( enter )
Now place 1125 into fastboot mode , power ( or reset button ) and volume down , tablet will show fastboot mode in lower left corner
Plug in usb cable to pc and tablet
Then in cmd prompt type
fastboot boot recovery.img ( enter )
It will show some stuff , flash ok and done ok
Tablet should boot to CWM give it a moment to do so ( You will see CWM Recovery Top hat and such )
Volume up is up , Volume down is down , Home ( Silver Button ) is select
Go to and select flash zip from sd card
This will pull up menu of following zip files
Flash each zip file
coby_mid1125-seed-0012.zip
coby_gapps.zip
Superuser-3.1.3-arm-signed.zip
Select reboot
Tablet will boot ,again give it a moment ( You will see Coby and then Android splash screen )
Select language from first screen ( as it will be in Dutch ), finish setup of tablet
Open ES File Explorer , go to tools setting in ES File Explorer and select
“Root Explorer” to on , allow when Super User prompt shows , this will prove SU is installed and working
Open ES File Explorer , Select sdcard top right , Select storage
Install Google_Play_serv.ices-signe.d .apk ( To sync Play Store )
Install Busybox.apk
Install Link2sd.apk
Install Uni-init+v1.0.apk
Open Uni-init+v1.0.apk , install intd support
( you will need busybox installed first for this to work )
You now have working Play Store , Superuser and Android 4.1 with Intd support
For Extended memory ,( You need this )
Increase Internal Memory by Link2SD : Min 2 GB microSD
In order to add memory to Coby 1125, your micro SD card used for install will need to be formatted
Copy all files you wish to keep from micro SD to desktop as it will be wiped
• Backup all your files on memory card.
• Go into the Recovery Mode ( as above , fastboot boot recovery.img ) ( Your operating system will be fine )
• Make a nandroid backup at this time
• Select “Advanced”, and then choose “Partition SD Card”.
• Then Choose your size ( if you have a 2GB Memory Card, choose 512 MB, and if you have a 4 GB Memory card, you can choose 1024 MB, ext ).
• Select 0 Swap.
• Wait for the process to finish, and then select Reboot
You’ve just made a partition on your memory card, and its ready to use.
Now follow the steps below for Link2SD
• Open Link2SD. You will be prompted to choose between ext2,ext3,ext4 and FAT32.
• Choose ext2
• Select OK ,
• It will then say, “Mount Script Created”.
• Now you Reboot your Tablet
• Open Link2SD again, if any message does not appear ,it means you succeeded.
• Go to Link2SD > Setting( far right top icon ) scroll down > Check the autolink. (to automatically move apps upon installation).
If you already have some apps listed , select “create link” ( be sure to check the files: app, dalvic-cache, and library files).
Move to SD option only moves app to SD it does not link them
Now to check the memory, select “Storage Info” . this will be showing you up the current status of your internal memory.
You should see as below SD Card 2nd Part
To move a system App you can long press App , it will pull up menu , select convert to user App let it do its thing
Select App again and it will open option to create link as installed user apps do
So far I have moved Calculator , VPN , Music FX , ES File Explorer and Sound Recorder with no issue
Use Link2Sd and (long press) on SystemUpdate.apk ( /system/app/SystemUpdate.apk ) and freeze app.
This will stop System Update from happening at random moments or on reboot
There is no Update to install though the System thinks so (without freezing it will continue to show updates available)
STOCK ROM
--------------------
I am posting a list of stock firmware(s) that I can find for the A706 here, along with instructions on how to install it.
FIRMWARE LIST
-------------------------
Build Number: A706_ROW_S018:
Details:
Firmware Type: Official Release
Languages: English, Russian, Chinese, Indonesian & Vietnamese
Build Date: 15/07/2013
OS: Android 4.1.2 with Lenovo Magic UI
Download Link: http://lenovo-forums.ru/files/file/242-rom-a706-1-s-2-001-0018-130705-row/
(You need to click on the green button on the page. Once you click there then you need to register and logged in, to download it.)
INSTRUCTIONS
-----------------------
A memory card is required.
Boot into Android normally.
Connect your phone to your PC/Laptop with a USB cable and when asked (or in USB connection settings), please select USB Mass storage mode to mount SD card.
On the root of the memory card, create a folder called "sdfuse".
Unzip the downloaded firmware, you will get a QSB file.
Copy the QSB file to the sdfuse folder that we created earlier on the root of SD card.
Note: Please make sure that your phone has atleast 65% power before attempting or beginning upgrade. Or keep charger connected during the process.
SD card upgrade process:
Long press VOL UP + POWER_KEY to enter the droidboot,
A menu will appear. Select the fourth option, SDUPDATE.
At the bottom of the screen, you can see the progress and status of the update
When you see the message "SDCARD UPDATE SUCCESS!!!", this means you successfully completed the upgrade process
Now, reboot your device and hopefully it should be updated.
CREDIT: Instructions were taken from this post and formatted and edited for better understanding.
If I helped you in anyway, Please show some courtesy & hit the THANKS button!
Hey guys i just wanna share how i solved my lenovo yoga problem with broken partition after rooting the tablet,i haved troubles with installing apps and use them,tablet its just goes reboot and its continues about 10 or more restarts,so fixed this when i returned to stock i searched here on xda i dont finded any stuff about this and i decided to share
First memory card is required if you dont have it will not work! So get memory card at least 4GB.
INSTRUCTIONS
-----------------------
1.Boot into Android normally.
2.Connect your phone to your PC/Laptop with a USB cable and when asked (or in USB connection settings), please select USB Mass storage mode to mount SD card.
3.Unzip the downloaded archive.
4.Copy "sdfuse" folder from archive to SD card.
Note: Please make sure that your phone has atleast 60% power before attempting or beginning upgrade. Or keep charger connected during the process.
:cyclops: SD card upgrade process:
Long press VOL UP + POWER_KEY to enter the droidboot,
A menu will appear. Select the fourth option, SDUPDATE.
At the bottom of the screen, you can see the progress and status of the update
When you see the message "SDCARD UPDATE SUCCESS!!!", this means you successfully completed the upgrade process
Now, reboot your device and hopefully it should be updated. You will have Jelly Bean 4.3 :highfive:
When it boots go to contacts type on new cotact name this code ####6020# then select your region! You must do this to get new update to KitKat,if you not it will show you that you dont have updates.
Sorry for my BAD english! :silly:
EUROPE VERSION with 3G ! Download Stock ROM for 3G version! /MEGA/ 860Mb:good:
I think for the Wi-Fi version it will be the same way so here is the link for Wi-fi
Download Stock ROM for Wifi version /Yandex/ 805Mb
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
yipeeyiho said:
hey thanks a bunch for that.! I have a B8080F wifi only model, currentlyrooted on 4.42, but it is a Chinese ROM ( build B8080_S102208_140918_PRC_wifi). can I use this?
Currently living in China but will be moving soon so looking for international rom .
Click to expand...
Click to collapse
This is for all version i think.
When it boots go to contacts type on new cotact name this code ####6020# then select your region! I think that will do the job when you select your region
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
when I type ####6020#, it says: Attention Error! Do not have easyimage.zip
[email protected] said:
Download Stock ROM for 3G version! /MEGA/ 860Mb it is not available ! Where can I download it ?
Click to expand...
Click to collapse
The procedure has been confirmed in Xda https://forum.xda-developers.com/sho...&postcount=412 and also by myself.
Remember that this procedure makes a full wipe and will erase all the internal memory, it is essential to make a Backup
Instructions
This is the requirements
1- Upgrade with USB-OTG
An OTG cable
A USB drive (8GB at least) Formatted as NTFS or ExFat
Also you can use an USB drive + USB C adapter
download 178 firmware following the link ( thanks @SLVMSF )
https://forum.xda-developers.com/showpost.php?p=79841124&postcount=175
To download 161 firmware just follow the link below ( thanks @SLVMSF )
https://forum.xda-developers.com/showpost.php?p=79660859&postcount=733
To Download .153 -L29
Download VOG-L29C 9.1.0.153 (C431E4R2P2) _Firmware_9.0.0_r3_EMUI9.1.0_05015THP.
https://www.dropbox.com/s/32shgrdzaokswgy/dload_Vog-L29.153.zip?dl=0
: https://transferxl.com/08vY9zCDBTWKdN
To Download .153-L09
look for the right firmware in this page and follow the guide
https://support.halabtech.com/index....older&id=45220
Open the Zip and extract the dload folder on the pendrive
- Turn off the P30 Pro
- Connect the pendrive with the OTG cable
- Now press the three buttons at the same time.
- Volume +
- Volume -
- Power button.
(The p30pro will light up and vibrate, keep the buttons pressed)
Only when you see the blank screen and EMUI appears will you release the buttons.
The flashing will start and lasts about 2 minutes.
After flashing the P30 Pro will restart automatically.
2- Upgrade with NM Card
- Extract the dload folder to the Nm card
- The same option for USB-OTG is valid.
And also you can try this one
- Enter the service menu by dialing * # * # 2846579 # * # *
- Press Option 4. Sofware Upgrade
- Press OPTION 1. Memory Card Upgrade
The device will restart and the update will begin.
I am not responsible for bad use of this guide.
Cheers
Thanks to
@Cambridge for his First full guide on how to flash by dload method
Reserved
juanpirulo said:
The procedure has been confirmed in Xda https://forum.xda-developers.com/sho...&postcount=412 and also by myself.
Remember that this procedure makes a full wipe and will erase all the internal memory, it is essential to make a Backup
Instructions
This is the requirements
1- Upgrade with USB-OTG
An OTG cable
A USB drive (8GB at least) Formatted as NTFS or ExFat
Also you can use an USB drive + USB C adapter
Download VOG-L29C 9.1.0.153 (C431E4R2P2) _Firmware_9.0.0_r3_EMUI9.1.0_05015THP.
https://1drv.ms/u/s!AkomK-CQYJF9ijZmxc4J8GQvIwKf
Open the Zip and extract the dload folder on the pendrive
- Turn off the P30 Pro
- Connect the pendrive with the OTG cable
- Now press the three buttons at the same time.
- Volume +
- Volume -
- Power button.
(The p30pro will light up and vibrate, keep the buttons pressed)
Only when you see the blank screen and EMUI appears will you release the buttons.
The flashing will start and lasts about 2 minutes.
After flashing the P30 Pro will restart automatically.
2- Upgrade with NM Card
- Extract the dload folder to the Nm card
- Enter the service menu by dialing * # * # 2846579 # * # *
- Press Option 4. Sofware Upgrade
- Press OPTION 1. Memory Card Upgrade
The device will restart and the update will begin.
I am not responsible for the bad use of this tutorial.
Cheers
Thanks to
@Cambridge for his First full Tutorial on how to flash by dload method
Click to expand...
Click to collapse
Actually, option 1 using both volume keys and bower key works on NM card as wel. No need to enter the service menu.
wow, thanks for work.
Where can i download VOG-L29 version C605 ?
-Zork- said:
wow, thanks for work.
Where can i download VOG-L29 version C605 ?
Click to expand...
Click to collapse
https://support.halabtech.com/index.php?a=downloads&b=folder&id=44877
USB otg mode is workking.
It's so simple !!
Thanks OP.
Option 1 and 2 work with either NM or USB-OTG drive
It did not work well with my device.
I tried in OTG mode.
The environment is 9.1.0.124 (C431E4R2P2).
When you start eRecovery, it becomes Software installed failed. (Incompatibility with current version)
What's wrong
Have you downloaded all the files and placed the three update files in to a folder called 'dload'?
Also, if having issues try the service menu method.
Don't let me download the firmware ?. I have what could it be?
takato23 said:
Don't let me download the firmware . I have what could it be?
Click to expand...
Click to collapse
try again here https://1drv.ms/u/s!AkomK-CQYJF9ijZmxc4J8GQvIwKf if its not working just follow the link to the direct download below
just download from here, https://support.halabtech.com/index.php?a=downloads&b=file&c=download&id=121664 , you will have to register first to download.
something is not going well with the drive link i put on first post. cheers
If it will not allow you to download due to too many people accessing the file, then add it to your drive. once there, right click and select "Create copy" you can then download the copy
i am trying to upload to mega. if someone have a valid link and want to share here please just post it. cheers
Unable to locate L09 firmware v 153. Don't think it's available yet.
153 firmware for C185 is available now in Halabtech. Just flashed it.
Hi All
I'm on 3 UK and when I inserted my sim it downloaded 3UK splash screens and apps etc. Can I flash this over my current 3 branded firmware using the USB-OTG method and will it still have all the 3UK customisation afterwards or will it debrand, if it will debrand it is there any way I can stop this happening again. Sorry for all the questions
Thanks in advance
csw43 said:
Hi All
I'm on 3 UK and when I inserted my sim it downloaded 3UK splash screens and apps etc. Can I flash this over my current 3 branded firmware using the USB-OTG method and will it still have all the 3UK customisation afterwards or will it debrand, if it will debrand it is there any way I can stop this happening again. Sorry for all the questions
Thanks in advance
Click to expand...
Click to collapse
You asked at just the right time, my device was a branded ThreeUK device... I just flashed it 30 mins ago on my device. Completely debranded it, however when you setup the phone it will give you an option to "Update" to a new custom version which is the carrier modified firmware. Presume this will rebrand it so i simply skipped it, note however it shows as update available in settings still if you want to install it in future manually. That being said... I wonder if it's possible to extract and see what this "Update" contains since it's 176MB which is a lot. Whether any optimisations ect are worth it for the branding.
That's great, thank you for the info! It really is a crap idea to customise a device based on operator sim card.
I will have a go at flashing this now, I've already downloaded the files
Thanks again
Hello, anybody know where I can find a firmware for the VOG-L04? Thanks in advance.
links not working guys, any others to try? Have signed up to website but file is blocked; too many DL's. Need this real bad, didn't realize Funky H puts files up that fail safety net after flash Thanks