hello all , 20 days ago I purchased this phone ipro mod A3 , immediately found the problem that the data connection and the wi.fi you , empowered by yourself even if I shut them . At this point I turned to the seller explaining the problem and he sent me a link to download sp flash tool and software. At this point the phone format , format whole flash and then I install the software, so everything is ok . I turn the phone starts normally , then exit the text imei null and at this point I start to worry . I search the internet and find a solution I do root your phone with vroot and then I used mtk droid and I put the codes imei . I notice that the programs they were when you first turn there were no more ' , the data connection and the wi-fi does not enable more' alone, but only if I do. the problem now and that if I enable the data connection with the sd card in the phone shuts continuing to say inspettatativamente removed sd , sd card and then comeback continues so
phone info
model A3
Android version 4.2.2
version baseband MOLLY.WR8.W1350.MD.WG.MP.V4.P3 , 09.23.2013 11:27
version 3.4.5 kernel builder @ c1 # 1 Mon Dec 16 15:18:26 CST 2013
build number A3_I9430_IPRO_2G_MP_V1.1
custom build version 131216
Room ipro a3
Good afternoon.
sir would you kindly make a backup of your computer to pasarmelo, is that I have the same computer and have died encesito urgently rom this quipo if possible that I spend my mail is [email protected]
thank you very much
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
I wonder if this will support 3g quipo in place that dond located or have a base upgrade you please provide me band.
Thank you.
Also a problem with the IPro A3
I dont hink he can make a backup of his Phone you could use, It uses UBIF so backup from Phone could be little bit more than just trickie.
Mine has a Problem after i deleted the weatherapp. After deleting Phone says System UI sutdown - Thats a classical softbrick as i cant use it anymore. i wrote to the factory and asked for a Link to the Rom a few minutes ago. Hope i get some.
Stanner 1978 could maybe send the Link he got from the factory or upload it somewhere, maybe ist is a other Version i´ll find there (newer), if i got some resume from the factorys Supportteam.
That Phone seems not to be very stable in the moment. Got a other one for my Son that couldnt find any Net with both simslots, send it back to the salesman and hope to get a functionally one then.
Best regards Chucky:highfive:
josevelsan said:
Good afternoon.
sir would you kindly make a backup of your computer to pasarmelo, is that I have the same computer and have died encesito urgently rom this quipo if possible that I spend my mail is [email protected]
thank you very much
---------- Post added at 10:09 AM ---------- Previous post was at 10:03 AM ----------
I wonder if this will support 3g quipo in place that dond located or have a base upgrade you please provide me band.
Thank you.
Click to expand...
Click to collapse
I tried to contact the factory but they told me, I also tried with a backup of a friend, but it was not accepted. I finally surrendered to us are passed over with the fork lift, the end solution for your phone ****
Related
Hi there
I hope someone can give me a solution how to resurrect my phone from the adroid graveyard...
Phone: x10mini (e10i / robyn)
Problem: does not respond to anything (no charge led, no turn on, no flashmode, and so on)
I was fed up with not being able to put apps on my sc card and internal memory full of unwanted apps, so tried to upgrade from android 2.1 to more recent version (CM7), but somehow a long the way I made some mistakes
Rooting worked fine, also phone put in debugging mode, firmware cheked ok (211106)
But when flashing kernel I chose the wrong one: x10blrelock (damn you x10 !)
I am not sure if I disconnected usb too soon or not...
I really must have found the worst walkthrough ever, because I also did not put any zip file on the sd card, nor did I install CWM recovery
Tried many key combos but no reaction from phone
Brought the phone to local unbricker -> he said he could bring it into download mode but at 50% flashed phone quits.
I asked him how het gets the phone in flash mode and said something about DIY system with 2 cables...
Now I want to at least get into flash mode (so I can try to get past 50%, because local unbricker was not familiar with the x10mini, more of a samsung guy)
At home I tried usb jig: stripped usb cable and put 300k ohm resistor to usb pin 4 and 5, but no luck
Phone put over 20hrs in charger, but no difference
Anybody got some ideas without JTAG or sending to SONY ?? I know the phone is quite old and second hand cheap, but I really liked my phone :crying:
-> Before I tried this flashing I read "difficult to hard brick" after I've bricked it I find a lot of posts about x10 bricked...So maybe someone has figured out what to do about it yet?
(I think I saw once a site with guy stripping x10mini to add some cables but can not find it again. I don't think it was for jtag or anything)
Any tips are well appreciated
DAVE
The same, briked x10 mini when flashing to nAa + minicm10
I have the same problem when flashing to nAa kernel+minicm10.
First bootlooping on nAa logo, then i tried to recover to old kernel and then it just got a light displaying nothing.
Then it seams as the battery got off and it do not charge neither recognize on flashtool.
I know i've done some sheat wrong. But instead of wearing another smartphone, i liked my x10 mini so much.
I needed to upgrade the android to use proxy and access point.
If there is a way to bring it back and update to minicm with android 2.3 or upper.... What nice!
If not,
R.I.P. mine old and good X10mini! I miss you!
to both of you. Have you tried using SEUS to restore the phone to factory?
any luck on this ??
did you resolve this ??? i've done it twice now - some little phone shop fixed first time but pricey....
davym688 said:
Hi there
I hope someone can give me a solution how to resurrect my phone from the adroid graveyard...
Phone: x10mini (e10i / robyn)
Problem: does not respond to anything (no charge led, no turn on, no flashmode, and so on)
I was fed up with not being able to put apps on my sc card and internal memory full of unwanted apps, so tried to upgrade from android 2.1 to more recent version (CM7), but somehow a long the way I made some mistakes
Rooting worked fine, also phone put in debugging mode, firmware cheked ok (211106)
But when flashing kernel I chose the wrong one: x10blrelock (damn you x10 !)
I am not sure if I disconnected usb too soon or not...
I really must have found the worst walkthrough ever, because I also did not put any zip file on the sd card, nor did I install CWM recovery
Tried many key combos but no reaction from phone
Brought the phone to local unbricker -> he said he could bring it into download mode but at 50% flashed phone quits.
I asked him how het gets the phone in flash mode and said something about DIY system with 2 cables...
Now I want to at least get into flash mode (so I can try to get past 50%, because local unbricker was not familiar with the x10mini, more of a samsung guy)
At home I tried usb jig: stripped usb cable and put 300k ohm resistor to usb pin 4 and 5, but no luck
Phone put over 20hrs in charger, but no difference
Anybody got some ideas without JTAG or sending to SONY ?? I know the phone is quite old and second hand cheap, but I really liked my phone :crying:
-> Before I tried this flashing I read "difficult to hard brick" after I've bricked it I find a lot of posts about x10 bricked...So maybe someone has figured out what to do about it yet?
(I think I saw once a site with guy stripping x10mini to add some cables but can not find it again. I don't think it was for jtag or anything)
Any tips are well appreciated
DAVE
Click to expand...
Click to collapse
smudge100 said:
did you resolve this ??? i've done it twice now - some little phone shop fixed first time but pricey....
Click to expand...
Click to collapse
Define pricey.
Same Problem : Help me out
MagniPop said:
Define pricey.
Click to expand...
Click to collapse
I also got the same problem. Please help me out. my location is lucknow. so may be someone in lucknow or delhi.
Contact - 9307367452
---------- Post added at 05:41 AM ---------- Previous post was at 05:34 AM ----------
smudge100 said:
did you resolve this ??? i've done it twice now - some little phone shop fixed first time but pricey....
Click to expand...
Click to collapse
I also got the same problem. Please help me out. my location is lucknow. so may be someone in lucknow or delhi.
Contact - 9307367452
hasanshabrez said:
I also got the same problem. Please help me out. my location is lucknow. so may be someone in lucknow or delhi.
Contact - 9307367452
---------- Post added at 05:41 AM ---------- Previous post was at 05:34 AM ----------
I also got the same problem. Please help me out. my location is lucknow. so may be someone in lucknow or delhi.
Contact - 9307367452
Click to expand...
Click to collapse
Find a repair shop that offers JTAGging service (with hardware like the Riff box). India is huge so you will probably have an easier time of finding one than I did.
Hey everyone
My Galaxy S3 will not connect to my Airtel GSM network (India). When going into the service providers it shows all the provides but will not connect to any of them. The error I get is that "Selected network (Airtel) is unavailable", so that means it is getting the signals from the network but is not connecting to them.
A little background, yesterday night my phone restarted and got stuck on the loading screen (the one that says Samsung), I searched on the net and went into the recovery mode (Volume up + Power + home) and there found that the error was that the efs partition could not be read. I've never rooted the phone or even tried to install a custom ROM. I did a factory reset and cleared cache and when that did not work I got desperate and tried to search online for a solution . I finally ended up using this
Youtube video titled E: failed to mount /efs (invalid argument) Galaxy S3 ... Can't post the url since I'm new here
I think this killed my IMEI number but it got the phone working again
The phone booted correctly however all text was in Portuguese and it had some really notifications that I did not understand.
Since I'd already lost all my data I decided to install the cynogenmod too CM11M7 (snapshot) hoping that would resolve most of these issues. The mod worked perfectly with everything including wifi running. However the only thing that does not work is that it will not connect to the GSM network. Please advise, really need this phone to work
Can I do a recovery using Odin? Will flashing another modem work, my current baseband number is I9300XXUGNA8? any other steps that I should be taking?
izzikiorage said:
Hey everyone
My Galaxy S3 will not connect to my Airtel GSM network (India). When going into the service providers it shows all the provides but will not connect to any of them. The error I get is that "Selected network (Airtel) is unavailable", so that means it is getting the signals from the network but is not connecting to them.
A little background, yesterday night my phone restarted and got stuck on the loading screen (the one that says Samsung), I searched on the net and went into the recovery mode (Volume up + Power + home) and there found that the error was that the efs partition could not be read. I've never rooted the phone or even tried to install a custom ROM. I did a factory reset and cleared cache and when that did not work I got desperate and tried to search online for a solution . I finally ended up using this
Youtube video titled E: failed to mount /efs (invalid argument) Galaxy S3 ... Can't post the url since I'm new here
I think this killed my IMEI number but it got the phone working again
The phone booted correctly however all text was in Portuguese and it had some really notifications that I did not understand.
Since I'd already lost all my data I decided to install the cynogenmod too CM11M7 (snapshot) hoping that would resolve most of these issues. The mod worked perfectly with everything including wifi running. However the only thing that does not work is that it will not connect to the GSM network. Please advise, really need this phone to work
Can I do a recovery using Odin? Will flashing another modem work, my current baseband number is I9300XXUGNA8? any other steps that I should be taking?
Click to expand...
Click to collapse
Yeah, without an efs backup, your IMEI is ruined. I suggest you flash back to a stock rom and take the device in for repair, if it is still under warrantee they should fix it for free, provided you have stock recovery and rom the device came with. You can search the General thread for how to do this.
cornelha said:
Yeah, without an efs backup, your IMEI is ruined. I suggest you flash back to a stock rom and take the device in for repair, if it is still under warrantee they should fix it for free, provided you have stock recovery and rom the device came with. You can search the General thread for how to do this.
Click to expand...
Click to collapse
It's not in warranty, plus I guess they'll keep it for quite a few days. Is there no other way to get this to work?
Also, could you please give me link to how I can put back all the stock things if I really need to take this in for repairs
Thank you so much for your help
Had the same problem when bought s3, exchanging sim-card in 'my operator''s office solved the problem
---------- Post added at 07:12 AM ---------- Previous post was at 07:04 AM ----------
izzikiorage said:
It's not in warranty, plus I guess they'll keep it for quite a few days. Is there no other way to get this to work?
Also, could you please give me link to how I can put back all the stock things if I really need to take this in for repairs
Thank you so much for your help
Click to expand...
Click to collapse
[email protected]
AlienJust said:
Had the same problem when bought s3, exchanging sim-card in 'my operator''s office solved the problem
---------- Post added at 07:12 AM ---------- Previous post was at 07:04 AM ----------
[email protected]
Click to expand...
Click to collapse
I wish it was that simple ...
Sorry, should've posted the solution earlier incase anyone else had the same problem
Took the phone to a service center, they re registered my IMEI. Charged me about 1200 INR (about 20$) to do so since the phone was purchased in the USA. After that it started working again. I've installed all the updates and it all seems to work fine. The lesson is that everyone, regardless of whether you are planning to tinker with the phone, should have a backup of the EFS partition.
Hi guys i'm new around here i had this problem with my s2 for a while now and tried to solve it myself but i haven't done such a great job and now my phone won't even start. I'll try to explain it as detailed as i can so you can understand .
So i rooted my s2 first time 2 years ago with the help of my friend (i don't remember the version of the android) and had this weird problem after 1 year i couldn't download any other apps because my memory was always full , so i decided to try another root maybe the problem will solve , so i rooted my phone to 5.1.1. Lollipop and everything was great for a week . Then the real chaos begin phone started to shut down randomly even with 80%+ battery and couldn't start it only if charged it , if the battery was 100% i could use the phone for 10 maybe 15 minutes and then again it would shut down , I used the phone like that for a couple of months but then it would shut down even when was charging so i decided to solve the problem (my friend didn't wanted to help me anymore) and started to search around the forum and on google for any solutions i found that i can unroot my phone to the stock official firmwave searched in the list for my version of build number but my build number (I9100XXLPS) is not matching with my region , tried the version of my region everything went alright until the phone rebooted . Now the phone is stuck at start up loading image and reboots itself after a while and does the same thing . I tried finding the good version of build number (I9100XXLPS) but i can't find any source of download .
Tell me guys what i am doing wrong and if you got any ideas how i could fix my phone please help :crying: :crying: :crying:
Thanks in advance.
Hi,
Try this guide if you haven't already:
[GUIDE][Troubleshoot a failed Odin flash]
Follow the guide carefully.
gsstudios
No worries, you must know from which region you have bought the Phone from so go to this link http://www.sammobile.com/firmwares/database/GT-I9100/ then signup and enter the region and download the firmware. And follow the link given by gsstudios. If you specifically want i9100XXLPS then get it from below link.. which is old version of IceCreamSandwich
http://android-recovery.info/7950/firmware/download/Samsung/I9100G+Galaxy+S+II/I9100XXLPS
---------- Post added at 03:32 PM ---------- Previous post was at 03:32 PM ----------
//////edit: Managed unrooting the phone to stock official firmwave but the problem is still there , if i unplug the phone from charger it shuts down automatically ... is this hardware problem or battery problem ?
By Mikros-Kleftis, Junior Member on Today, 05:00 AM
--------------------------------------
Might me a battery problem, what if you are charging and if you remove your battery, is the phone still ON ?
Saravanashines said:
---------- Post added at 03:32 PM ---------- Previous post was at 03:32 PM ----------
[/COLOR]//////edit: Managed unrooting the phone to stock official firmwave but the problem is still there , if i unplug the phone from charger it shuts down automatically ... is this hardware problem or battery problem ?
By Mikros-Kleftis, Junior Member on Today, 05:00 AM
--------------------------------------
Might me a battery problem, what if you are charging and if you remove your battery, is the phone still ON ?
Click to expand...
Click to collapse
First of all im sorry for double topic (sorry i cant find how to delete the other) , if i remove the battery the phone shut down but i tried an older battery and phone doesn't shut down automatically i can use it for 5-10 minutes then it shut downs
hey there im thomas from switzerland and im new here
i cant post the thread in the specific area due to my newbie status. im sorry
my englisch isnt that good; neither is my knowledge in software engineering. i dont know the specific terms like adbpush/pull, cwm, mount and so on. im not even sure what exactly the difference between rooting and flashing is lol and i have no clue about what a kernel is
so thats gonna be kinda funny. i hope
well my problem i quite easy to explain. my wifes galaxy s7 is bricked/has a boot loop whatever. it powers up, doestn vibrate and shows the samsung logo an stocks from that on. it doesnt reboot automatically. its stuck at this point until the battery dies or i enter the boot mode or bios or how u say to the mode (power,home,volup) and shut it down. when i shut it down manually im able to restart it again and enter the download mode (voldown). simple restarting or wiping cache didnt work.
so u see i already tried to fix it myself within my abilities. i postet my acutal problem in some other forums but i didnt really got helped out and mostly was told to contact the xda developers for professional and patient help.
i dont want to get the phone running again, its display is a little broken and i got a guarantee so i can swap the phone via my provier, so thats not the actual point. the only thing i want to have are the many many pictures which my wife didnt cloudshare or save otherwise.
so what can i exactly do to recover the pictures and videos. ive read as long as i can access the download mode im able to do something, but no one really knows how to.
the device is a standard s7 non rooted, i dont know exactly which android is running on it but i think my wife would have updated the version if the notification would have popped up. so i think its android 6.0 or 6.0.1 or something like that. im pretty sure she didnt enter the development settings to enable usb debugging or something else. its just a standard s7 from a german store. i do not know the exact model number of the phone like (gt-123456) hope these informations are neccessary if not sorry lol
ive read a lot of flashing instructions with lots of terms which ive never heard and cant explain to myself.
so is there probably anyone who would so nice to instruct for dummies how to get my pictures and videos from the phone please? just explain what to do in non-it-professional-words. if ure going to use a term just quickly explain in very few words what is meant by that.
ive read somewhere about an samsung usb driver to install first, but everywhere are only parlty described guides which i just dont understand.
i have downloaded odin3, have an usb cable, the device, a very slow win10 laptop, absolutely no clue of the complete matter but much patience haha
thank you very very very much
thomas
I am not sure that you may or may not get DATA from phone Back. But if you flash with stock rom for now you may able to open phone.
Allow me some time to get instruction and firmware and necessary files. Be patient.
Salman
(If I helped you please press Thanks)
---------- Post added at 06:46 PM ---------- Previous post was at 06:00 PM ----------
@thomaszurich please give your phone details
Model Number S7-xyz is it edge or ???
and your country name so that i can arrange your country firmware.
Edit:
Country : Switzerland
Please Confirm??
---------- Post added at 06:55 PM ---------- Previous post was at 06:46 PM ----------
@thomaszurich
Model : SM-G930F
Model name : Galaxy S7
Please confirm, I got ROM for Switzerland (Swisscom)
Android Version : 6.0.1
hey there
thank you very much. ive found a video which declared what files i maybe need.
i already downloaded the 2.1 gb sized rom from sammobile.com for my model last night, i found the number on the case and i also downloaded and installed the samsung usb driver for the s7.
tonight im going to try out what to do. so what im about to do with that?
i also read that usb debugging must be enabled, which surely has not been done by my wife.
cheers
thomaszurich said:
hey there
thank you very much. ive found a video which declared what files i maybe need.
i already downloaded the 2.1 gb sized rom from sammobile.com for my model last night, i found the number on the case and i also downloaded and installed the samsung usb driver for the s7.
tonight im going to try out what to do. so what im about to do with that?
i also read that usb debugging must be enabled, which surely has not been done by my wife.
cheers
Click to expand...
Click to collapse
Good to see that
http://www.sammobile.com/firmwares/download/101636/G930FXXS1BPI8_G930FVFG1BPH2_SWC/
Please do reply me once you done or else message me if you got any trouble.
Salman
so the actual question is: what do i have to do now with all these data? try to "flash" with odin3 like in many other descriptions? if it works, does my phone boot as like as nothing ever happened and i can totally use the device again? or is just the bootloader menu extended so that i have to go further steps to get my pictures saved or what?
im sorry, as i said i dont know much about android things like that.
what am i supposed to do now and what exactly is my phone supposed to do afterwards?
thomaszurich said:
so the actual question is: what do i have to do now with all these data? try to "flash" with odin3 like in many other descriptions? if it works, does my phone boot as like as nothing ever happened and i can totally use the device again? or is just the bootloader menu extended so that i have to go further steps to get my pictures saved or what?
im sorry, as i said i dont know much about android things like that.
what am i supposed to do now and what exactly is my phone supposed to do afterwards?
Click to expand...
Click to collapse
Your problem's solution is simple...when u flash ur firmware file (2.1gb) through Odin, it will only clear ur system partition and some other partitions but won't touch ur data portion where ur pics are stored... So just flash ur firmware using Odin ..
well i just flashed the phone, odin worked with success but the s7 is still stuck at the same point. it doesnt boot up.
what else can i do to get to my data? is there any option?
thomaszurich said:
well i just flashed the phone, odin worked with success but the s7 is still stuck at the same point. it doesnt boot up.
what else can i do to get to my data? is there any option?
Click to expand...
Click to collapse
Be clear with your problem so that we can solve it.
Try to flash with your specific country firmware I already attached in my previous posts.
NOTE: Please reply to our post so that we can receive notification, You need to simply click on Reply on my post.
Hey there,
I did flash the Country Firmware via odin as u told me but the problem is still the same.
thomaszurich said:
Hey there,
I did flash the Country Firmware via odin as u told me but the problem is still the same.
Click to expand...
Click to collapse
is s7 have twrp ? twrp have mtp support , and backup all your data , after that flash the firmware via odin and wipe all system
Hi All,
I wonder if any of you is able to help me please, I promise a kind donation in case the device works again.
So here's my story I bought a 2nd hand Galaxy s6 device from a store, it worked for about 9 months then it got blocked, I returned it to the store and after lots of arguing he decided to exchange the blocked device for a similar one if I repair the screen I broke, so I paid him another £180.00 to fix both the screen and back cover.
The wanker gave me a phone which looked fresh, I put my sim inside and it worked without any issues whatsoever... for about 30 mins then the sim card was not recognised anymore !! changed sim cards and nothing happened, when I returned back to the shop the IMEI number on the receipt was not matching the IMEI number in the phone, so the prick said that I am lying to him and that this device is not the one he sold to me, without any proof of it, I am now totally screwed.
After putting the device into download mode it shows the model name as: SM-G925X
The MF gave me a LDU, but whats driving me nuts is that it worked for about 30 mins, I made calls from this LDU for less than 30 mins before it stopped reading the sim card !
Now I took it to another store, where the guy completely f it up and got it bricked and now stuck at the samsung logo.
**If anyone could help me to get this device to work again I will be so grateful to you and promise and kind donation.
freestyler912 said:
Hi All,
I wonder if any of you is able to help me please, I promise a kind donation in case the device works again.
So here's my story I bought a 2nd hand Galaxy s6 device from a store, it worked for about 9 months then it got blocked, I returned it to the store and after lots of arguing he decided to exchange the blocked device for a similar one if I repair the screen I broke, so I paid him another £180.00 to fix both the screen and back cover.
The wanker gave me a phone which looked fresh, I put my sim inside and it worked without any issues whatsoever... for about 30 mins then the sim card was not recognised anymore !! changed sim cards and nothing happened, when I returned back to the shop the IMEI number on the receipt was not matching the IMEI number in the phone, so the prick said that I am lying to him and that this device is not the one he sold to me, without any proof of it, I am now totally screwed.
After putting the device into download mode it shows the model name as: SM-G925X
The MF gave me a LDU, but whats driving me nuts is that it worked for about 30 mins, I made calls from this LDU for less than 30 mins before it stopped reading the sim card !
Now I took it to another store, where the guy completely f it up and got it bricked and now stuck at the samsung logo.
**If anyone could help me to get this device to work again I will be so grateful to you and promise and kind donation.
Click to expand...
Click to collapse
I will try to help u
First please don't use abuse language
And if hey boot looped it is there any way you could get into recovery mode
---------- Post added at 05:16 PM ---------- Previous post was at 05:13 PM ----------
See if it boots into the recovery mode u just have to do is clear cache and factory reset(in same order) and then try booting the device
Krishhacker said:
I will try to help u
First please don't use abuse language
And if hey boot looped it is there any way you could get into recovery mode
---------- Post added at 05:16 PM ---------- Previous post was at 05:13 PM ----------
See if it boots into the recovery mode u just have to do is clear cache and factory reset(in same order) and then try booting the device
Click to expand...
Click to collapse
I am genuinely sorry about the bad language, its just out of frustration. And thank you very much in advance.
I am no longer able to get into recovery mode, I tried flashing various firmwares by removing all the .bin files yet the device is still stuck in boot loop.
I also cant locate the S/N to use the emergency recovery function in Smart switch, last time the device was on the imei number and S/N it had, showed up as a completely different samsung device !
freestyler912 said:
I am genuinely sorry about the bad language, its just out of frustration. And thank you very much in advance.
I am no longer able to get into recovery mode, I tried flashing various firmwares by removing all the .bin files yet the device is still stuck in boot loop.
I also cant locate the S/N to use the emergency recovery function in Smart switch, last time the device was on the imei number and S/N it had, showed up as a completely different samsung device !
Click to expand...
Click to collapse
The person just gave you a temp efs (IMEI no) which got expired and device lost signal with the provider nevermind and where do you live please tell me(country)
I live in Scotland, UK. What's really confusing me is that it's a LDU, and I read multiple times that LDU are not full mobile phone devices they are missing an antenna or something like that. You really do sound like you know what you're talking about, thank you very much for helping me.
freestyler912 said:
I live in Scotland, UK. What's really confusing me is that it's a LDU, and I read multiple times that LDU are not full mobile phone devices they are missing an antenna or something like that. You really do sound like you know what you're talking about, thank you very much for helping me.
Click to expand...
Click to collapse
Have you solved this mate
Not at all, the device has been lying on the desk like a brick.
freestyler912 said:
Not at all, the device has been lying on the desk like a brick.
Click to expand...
Click to collapse
Do you have the tools to get inside the phone? To see if the phone has antenna?
Or dial *#0*#
On the menu press receiver.... does it make a sound?
Thanks for your quick reply Calum, no unfortunately am not able to get inside the phone, but I am certain that it does have an antenna because I made calls from it ! it seems like the phone has been bricked, because am still stuck in the bootloop and not able to start it up at all
freestyler912 said:
Thanks for your quick reply Calum, no unfortunately am not able to get inside the phone, but I am certain that it does have an antenna because I made calls from it ! it seems like the phone has been bricked, because am still stuck in the bootloop and not able to start it up at all
Click to expand...
Click to collapse
Have a go at flashing this firmware via odin. Rumour has it that you can flash unbranded G925F firmware onto an LDU. The worse that can happen is odin will fail.
If you need instructions on how quote me and I will get the notification
https://www.sammobile.com/firmwares/download/106963/G925FXXS4DPJ2_G925FBTU4DPH1_BTU/
Thanks mate, I have tried that in the past and it worked through odin but the phone is still stuck at the Samsung logo, I will give it a go one more time though and see what happens
freestyler912 said:
Thanks mate, I have tried that in the past and it worked through odin but the phone is still stuck at the Samsung logo, I will give it a go one more time though and see what happens
Click to expand...
Click to collapse
Flash the firmware mate but uncheck auto reboot in odin. Once successful flash boot to recovery and wipe data and cache then reboot. Give that a try
callumbr1 said:
Flash the firmware mate but uncheck auto reboot in odin. Once successful flash boot to recovery and wipe data and cache then reboot. Give that a try
Click to expand...
Click to collapse
Alright so I have given that a go, odin failed to flash the firmware, I tried a different one for th SM-G925F with only the F. Reset Time ticked and it worked, but its still not get into recovery mode, when holding the vol up, home and power it does nothing.