Long ago, I unlocked my s5830i and installed CWM 5.x, but keeping Samsung's firmware. Long story short, I decided to try a new rom recently. I used CWM to take a backup, wiped and flashed the new rom, and used it a month, before deciding yesterday I preferred the previous rom.
So today I went into CWM, hit "restore", and it started to reflash back as normal, but after erasing the boot partition said there was an error in flashing and stopped. I tried a couple more times, same error. So I retried with my other 2 backups on the sdcard to get at least boot flashed properly, but both of those gave md5 errors. I haven't done more. Right now I have the phone showing the CWM screen, and on a charger so it can't shut down. If it truly doesn't have a valid boot partition then I am scared that any reboot or exit from CWM might leave me with an unbootable phone. Please help, as I have no idea what to do next and terrified I'll lose the device entirely or something.
Things I've tied and information that might help:
No evidence of error or issue on the sdcard itself, though I can't rule out the chance it has an issue.
The /recovery directory was previously copied via USB mass storage to my desktop, and SHA1 verified as accurate on backup. The SD card was formatted at some point. I used sha1 verification to copy /recovery back to the sdcard, today, again using USB mass storage.
The phone's been plugged into a USB2 port all day, but I'm not sure if that charges it or not, and some people say there is a 70% charge limit otherwise flashing won't wor, could that be the problem? Might my boot partition be ok after all?
No other sdcard holding device, I could borrow a Galaxy S2 from a friend and change the card then reinsert it, if needed?
adb + fastboot 1.83 + samsung USB drivers + copies of the /recovery backups are all on still the desktop if needed and all good AFAIK (if they work when at the recovery screen). Don't know if fastboot helps but I have it and it works.
Two backup subfolders on the desktop have a boot.img file in them (5,242,880 bytes). No idea why the others don't.
I don't want my phone bricked or inaccessible, and I don't want to make it worse by mistake, what can I do?
Try this........
Stilez said:
Long ago, I unlocked my s5830i and installed CWM 5.x, but keeping Samsung's firmware. Long story short, I decided to try a new rom recently. I used CWM to take a backup, wiped and flashed the new rom, and used it a month, before deciding yesterday I preferred the previous.....................
Click to expand...
Click to collapse
You can try to flash the stock ROM using Odin. Download the stock ROM from:-
h t t p : / / w w w .mediafire.com/download/x22525oizrrzmr7/S5830i_XXLI1_ODDLI1_DDLI1_by_SplitFUS2 . zip
[Remove the spaces. I'm new here so I can't post URLs. Forgive the cheating]
Download Odin from:-
h t t p s : / / w w w . dropbox.com/s/44mi0ybm3i0qbvo/Odin . rar
Happy flashing!
Go to backup and restore option in cwm and in restore go to advance restore there you restore only system and boot your mobile..if that dosnt boot your mobile then flash stock rom thru odin..
Here is the link for all your doubts.
http://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
Here is the link for all your doubts.
http://forum.xda-developers.com/showthread.php?t=1840645
Click to expand...
Click to collapse
That's a pretty good resource page. I'll look at it when I get home! Thank you!!
I have two questions before going ahead with whatever it says.
Is adb active during CWM? Can I also use that to reflash boot.img orthe system recovery, or something, because if so, I'm used to adb but so it's got the advantage it's familiar compared to odin.
If the boot partition flash did fail, and its contents are corrupted, how does it reboot after CWM? Or does it warm reboot and not use the boot partition in that case? When does it use the boot partition?
Okay, made progress, almost there
Okay, I found out partly what went on, enough to fix it part way.....
Like many people, I renamed my CWM backups to be clear what they were, and CWM doesn't warn that files with spaces will fail to recover with an MD5 error. Fixed that with ADB. Second I moved from stock to CM7.2 and obviously the file system was silently updated or something (my CM7.2 /system seems to use ext4). None of my CWM backups of the original install work, they all fail. But all my backups from CM7.2 onward worked fine, so it's got to be something CWM can't do if /system was previously used on CM7.2, or something. No idea why it couldn't mount system but could restore a CM7.2 backup to it even if the file system was updated though, doesn't make sense (yet!)
I'd like to understand what actually happened, so I don't make the same mistake again, and what's the best way (now I have access to CM7.2 again) to restore my CWM backup I took before CM7.2 when I was running the stock rom?
You can't restore your cwm backup of stock rom if you are on cm7.2
Sent from my GT-S5830i using Tapatalk 2
amolgosavi said:
You can't restore your cwm backup of stock rom if you are on cm7.2
Click to expand...
Click to collapse
Because the device storage was converted from rfs to ext4, I guess? But it can be converted back surely.
If so, surely a key part of "recovery" is to be able to recover old backups. Seems a bit weak to say it can't restore unless the filing system is working and unchanged (I appreciate you're explaining how it is, but don't you agree it just seems very weak to have that issue when a different rom often uses a different fs and at least 3 or 4 are common).
Presumably a way exists to convert the storage back to rfs, just not built into recovery. Any ideas what would be needed to return to my stock backup? I'd really like to avoid odin + stock flash + re-root if possible as it's simply a fs format change and I still get nervous of rooting in case of error
I dont know much about it...
Sent from my GT-S5830i using Tapatalk 2
Stilez said:
Because the device storage was converted from rfs to ext4, I guess? But it can be converted back surely.
If so, surely a key part of "recovery" is to be able to recover old backups. Seems a bit weak to say it can't restore unless the filing system is working and unchanged (I appreciate you're explaining how it is, but don't you agree it just seems very weak to have that issue when a different rom often uses a different fs and at least 3 or 4 are common).
Presumably a way exists to convert the storage back to rfs, just not built into recovery. Any ideas what would be needed to return to my stock backup? I'd really like to avoid odin + stock flash + re-root if possible as it's simply a fs format change and I still get nervous of rooting in case of error
Click to expand...
Click to collapse
Go to XDA search for MultiFormator
and Download it and Flash it in CWM , Aroma will startup now Choose your System to be changed like RFS to ExT4 or EXT4 to RFS
For stock base Rom restoration Select RFS ,After process completes do wipe data ,wipe cache ,dalvik in CWM and then hit restore , your phone will boot up with your backup.
Stilez said:
Long ago, I unlocked my s5830i and installed CWM 5.x, but keeping Samsung's firmware. Long story short, I decided to try a new rom recently. I used CWM to take a backup, wiped and flashed the new rom, and used it a month, before deciding yesterday I preferred the previous rom.
So today I went into CWM, hit "restore", and it started to reflash back as normal, but after erasing the boot partition said there was an error in flashing and stopped. I tried a couple more times, same error. So I retried with my other 2 backups on the sdcard to get at least boot flashed properly, but both of those gave md5 errors. I haven't done more. Right now I have the phone showing the CWM screen, and on a charger so it can't shut down. If it truly doesn't have a valid boot partition then I am scared that any reboot or exit from CWM might leave me with an unbootable phone. Please help, as I have no idea what to do next and terrified I'll lose the device entirely or something.
Things I've tied and information that might help:
No evidence of error or issue on the sdcard itself, though I can't rule out the chance it has an issue.
The /recovery directory was previously copied via USB mass storage to my desktop, and SHA1 verified as accurate on backup. The SD card was formatted at some point. I used sha1 verification to copy /recovery back to the sdcard, today, again using USB mass storage.
The phone's been plugged into a USB2 port all day, but I'm not sure if that charges it or not, and some people say there is a 70% charge limit otherwise flashing won't wor, could that be the problem? Might my boot partition be ok after all?
No other sdcard holding device, I could borrow a Galaxy S2 from a friend and change the card then reinsert it, if needed?
adb + fastboot 1.83 + samsung USB drivers + copies of the /recovery backups are all on still the desktop if needed and all good AFAIK (if they work when at the recovery screen). Don't know if fastboot helps but I have it and it works.
Two backup subfolders on the desktop have a boot.img file in them (5,242,880 bytes). No idea why the others don't.
I don't want my phone bricked or inaccessible, and I don't want to make it worse by mistake, what can I do?
Click to expand...
Click to collapse
Flash stock rom from odin..
Go to this link
http://forum.xda-developers.com/showthread.php?t=1840645
Sent from my GT-S5830i using Tapatalk 2
@Stilez if you made your backup on temporary cwm then restore with that cwm. Cm7 kernel's inbuilt cwm is different.
But it would be best to flash stock ROM via Odin then restoring that backup.
Sent because I <3 Aerith
Hitesh2626 said:
Go to XDA search for MultiFormator
and Download it and Flash it in CWM , Aroma will startup now Choose your System to be changed like RFS to ExT4 or EXT4 to RFS
For stock base Rom restoration Select RFS ,After process completes do wipe data ,wipe cache ,dalvik in CWM and then hit restore , your phone will boot up with your backup.
Click to expand...
Click to collapse
Wow. Just exactly what I was after - thank you! Worked brilliantly.
NightRaven49 said:
But it would be best to flash stock ROM via Odin then restoring that backup.
Click to expand...
Click to collapse
Probably yes I might do that anyway seeing as the CM7.2 kernel is still lingering and boot flash is fail. But at least I can switch back and forth between my original rom (which mostly does work) and cm7.2 if I need to.
Interesting point on the side - my original CWM (5.0.2.6) worked but the one installed with cm7.2 didn't, any idea why?)
Related
Hello,
I have a Samsung Galaxy Mini with stock Android 2.2, not rooted and USB debugging is not on. Now the phone memory was quite full so I tried to remove the Street View app, but now the phone is stuck in boot loop mode. The Samsung logo is just glowing and the phone vibrates now and then.
I can get into download mode and recovery mode. I think I can flash a new firmware in download mode and then the phone would work fine then, but my big question is how I can save all my data (contacts, notes and so on)? Is it possible to backup an image before flashing, in recovery mode? Or is it possible to save just all my own files (contacts, sms and so on, and not the whole system)?
I guess everything will be flashed over when I reflash? Or is it in some way possible to reflash a new rom (maybe it needs to be the same 2.2 then?), so that my personal data will stay? I also tried to download files with "adb pull" but the /data folder can't be mounted, it just says permission denied, so I can't access my personal data with adb.
Are your contacts online in your Google account?
Sent from my GT-N7000 using Xparent SkyBlue Tapatalk 2
so there are many possibilities...
if your phone boot loops:
1. install cwm recovery
2. make a full backup
3. you can try to flash a custom rom (without wipe). maybe it works. if not follow step 4.
4. do a full wipe
5. install a rom
6. root your phone (if you install a custom rom its already rooted)
7. copy the file "data.zip" (or something like that) to your computer and unpack it.
8. copy the files/folder you need with adb to your phone.
if your phone doesnt boot loop (phone stucks at boot) :
1. root your phone
2. copy the files you need with adb
3. install a new rom and copy the files back to your phone
i dont know if it will work but i think it will. and please dont brick your phone while installing cwm
sorry for my bad englisch
Unfortunately I didn't have contacts sync to google on, so I don't have them backuped there.
Is it possible to install cwm on Android 2.2 which is not rooted? I understood it requires 2.3?
Is this the right way to install cwm recovery? wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Mini:_Full_Update_Guide#Installing_the_ClockworkMod_Recovery
edit: the guide seems to be for Android 2.3 and I think I had the stock 2.2, so is there any way to do it with 2.2?
Well now I managed to install cwm recovery with this guide: forum.xda-developers.com/showthread.php?t=1342190 and the CWM-Froyo.tar found there.
I tried to do a backup to sd card in cwm recovery, but found only boot.img and recovery.img files on the card, both sized 8192kb, and I don't think they include the whole system. It seems to be impossible to mount the /data folder from there, maybe because the phone is not rooted. Can somebody help me how I should continue?
How can I flash a custom (or stock) rom without wipe, or is there any other way to get my own data?
muranaman said:
Well now I managed to install cwm recovery with this guide: forum.xda-developers.com/showthread.php?t=1342190 and the CWM-Froyo.tar found there.
I tried to do a backup to sd card in cwm recovery, but found only boot.img and recovery.img files on the card, both sized 8192kb, and I don't think they include the whole system. It seems to be impossible to mount the /data folder from there, maybe because the phone is not rooted. Can somebody help me how I should continue?
How can I flash a custom (or stock) rom without wipe, or is there any other way to get my own data?
Click to expand...
Click to collapse
you cant mount /system, /data and so on because the recovery you flashed supports only ext4 filesystems. but stock roms use rfs filesystem. so you need a cwm version that supports rfs + ext4.
---Signature---
Don't be afraid to hit the thanks button. It doesn't bite. lol
Sorry for my bad englisch
---------- Post added at 08:24 PM ---------- Previous post was at 08:10 PM ----------
i am not sure but i think you can root your phone with the stock recovery.
---Signature---
Don't be afraid to hit the thanks button. It doesn't bite. lol
Sorry for my bad englisch
Okay, but I can't seem to find a cwm recovery version that supports rfs + ext4, for Galaxy Mini. If there is none with rfs support, are there any ways left then? How would I flash a stock or modified rom without wiping my data?
I don't think I can get back to stock recovery anymore as I now have cwm, and also I haven't found any guide how to do it on android 2.2, on gingerbread is seems possible.
you cant flash a custom rom without wipe because the filesystem of the partitions is rfs and all custom roms use ext4 (as far as i know).
i search a bit in the web if there is anothr way. i will write it if i find something
---Signature---
Don't be afraid to hit the thanks button. It doesn't bite. lol
Sorry for my bad englisch
---------- Post added at 10:40 PM ---------- Previous post was at 10:03 PM ----------
i found an other recovery. there is also a stock pluging. maybe you can do a backup of data with this recovery.
http://forum.xda-developers.com/showthread.php?t=1439731
---Signature---
Don't be afraid to hit the thanks button. It doesn't bite. lol
Sorry for my bad englisch
Thanks, but unfortunately that one didn't work either, now the phone seems even a bit more bricked because now it only shows the Samsung still logo, and I can't get into recovery mode. Maybe it was for android 2.3.
But it still goes into download mode, is it possible then to reflash a stock rom, without wiping my /data with contacts and so on? How should I do it in Odin, without wiping my data? Or is there some other more safe way?
i think there is no chance anymore
if you flash a stock rom with odin it will wipe everything and there is no option to flash without wipe (as i know)
sorry but i have no idea anymore.
flash a stock rom with odin and post at facebook or something like that (if you are using it) that you need the numbers of your friends, family, etc
---Signature---
Don't be afraid to hit the thanks button. It doesn't bite. lol
Sorry for my bad englisch
who tell u that ODIN should wipe data partitio, do it but alway double check to remove trik beside wipe all.
Sent from my HTC Desire HD using xda premium
Okay.. How are the stock updates installed then, because I've understood that they don't always wipe? Is it impossible to just overwrite the existing files with all files from a stock android 2.2 image? Why isn't it possible to dump the content of the entire flash memory...
I know I can get the most important phone numbers, and I also have an almost one year backup in Kies, but I was kind of hoping to also get my notes that are written with the notes app. Maybe I still should try to install CWM recovery in download mode if it would help anything. I think sending the phone for warranty repair also won't help if it's impossible to get the files.
Edit:
Mohazia: Where in Odin should I unselect that wipe all? I can't find such marking: forum.xda-developers.com/attachment.php?attachmentid=782552&d=1321297175
Now I reinstalled the CWM I had earlier, and now the phone boot loops just as earlier. How can I now reflash a stock image of android 2.2, without wiping data?
Is it, or is it not possible to flash a stock image without wiping data, from odin? Can I install some of the 2.2 images from here: yagyagaire.blogspot.fi/2012/01/official-samsung-firmwares.html
In the image I found the following files:
APBOOT_S5570XXJL9_CL816096_REV02_user_mid_false.tar.md5
CODE_S5570XXJL9_CL816096_REV02_user_mid_false.tar.md5
CSC_S5570SERJL9_CL816096_REV02_user_mid_false.tar.md5
MODEM_S5570XXJL9_CL816096_REV02.tar.md5
TASS_v1.0.ops
Should I install some of them, or all, if I want to keep my personal data?
muranaman said:
Now I reinstalled the CWM I had earlier, and now the phone boot loops just as earlier. How can I now reflash a stock image of android 2.2, without wiping data?
Is it, or is it not possible to flash a stock image without wiping data, from odin? Can I install some of the 2.2 images from here: yagyagaire.blogspot.fi/2012/01/official-samsung-firmwares.html
In the image I found the following files:
APBOOT_S5570XXJL9_CL816096_REV02_user_mid_false.tar.md5
CODE_S5570XXJL9_CL816096_REV02_user_mid_false.tar.md5
CSC_S5570SERJL9_CL816096_REV02_user_mid_false.tar.md5
MODEM_S5570XXJL9_CL816096_REV02.tar.md5
TASS_v1.0.ops
Should I install some of them, or all, if I want to keep my personal data?
Click to expand...
Click to collapse
Sorry I have to review it on my laptop, just give me 1hr to reply, but I'm sure that u can do it without wipping /data
Sent from my HTC Desire HD using xda premium
OK, Now we have 2 options,
If it only the Street View issue, you can download update.zip file and put it in the root of SD-Card, and flash it via CWM.
The Other Option is to use ODIN 4.38 and make sure to select Debug Only, and sure you have to remove One Package, and sure
OPS: TASS_v1.0.ops
BOOT: APBOOT_S5570XXJL9_CL816096_REV02_user_mid_false.ta r.md5
Phone: MODEM_S5570XXJL9_CL816096_REV02.tar.md5
PDA; CODE_S5570XXJL9_CL816096_REV02_user_mid_false.tar. md5
CSC: CSC_S5570SERJL9_CL816096_REV02_user_mid_false.tar. md5
all hopes, but never to forget to
1- root
2- switch USB Debugging Mode
3- upload your contacts to Gmail Contacts
4- Install SMS Backup+
5- GNote
so, what ever happen, your data is safe :fingers-crossed:
Thanks a lot for the help but unfortunately it didn't help. The update.zip didn't make any difference, and flashing through Odin made the system work, but the contacts are not there. It now has a different language, so that might be a reason, the version was not totally the same. I had debug only selected so that is not the reason. I guess there is nothing to do anymore, but at least the system works now...
muranaman said:
Thanks a lot for the help but unfortunately it didn't help. The update.zip didn't make any difference, and flashing through Odin made the system work, but the contacts are not there. It now has a different language, so that might be a reason, the version was not totally the same. I had debug only selected so that is not the reason. I guess there is nothing to do anymore, but at least the system works now...
Click to expand...
Click to collapse
Sorry for lossing ur contacts, maybe because you select deferent frameware version than existed.
maybe for update.zip, 2 reasons, either there is some else than street view, or you have to mount system 1st.
anyhow, nothing to do now
now, go to sync every things for future
Sent from my HTC Desire HD using xda premium
mohazia said:
maybe for update.zip, 2 reasons, either there is some else than street view, or you have to mount system 1st.
Sent from my HTC Desire HD using xda premium
Click to expand...
Click to collapse
he cant mount system because his cwm version supports only ext4 but the filesystem of a stock rom is rfs.
---Signature---
Don't be afraid to hit the thanks button. It doesn't bite. lol
Sorry for my bad englisch
Just for trying I tried and made some contacts and notes, and then I reflashed the same version from Odin the same way, and they was gone. So it seems impossible to reflash from Odin without wiping data. Maybe JTAG is the only way to get stuff out from a boot looping phone with stock 2.2 then.
My current CWM is giving me errors mounting /system and /data, and I can't restore my nandroid backup.
Anyway to do it using another CWM (link, please), or any way at all? So far, everything I've read says another CWM version won't work (well, that and there aren't many choices on our device).
EDIT: Fixed it by doing a clean install and using Titanium Backup to restore from my nandroid backup.
GermainZ said:
My current CWM is giving me errors mounting /system and /data, and I can't restore my nandroid backup.
Anyway to do it using another CWM (link, please), or any way at all? So far, everything I've read says another CWM version won't work (well, that and there aren't many choices on our device).
Click to expand...
Click to collapse
Your /system, /data and /cache are in rfs or ext4?
I just used ODIN to go back to the stock ROM, so that might have changed something.
Currently:
Code:
/dev/stl9 [b][u]/system rfs[/b][/u] ro,relatime,vfat,log_off,check=no,gid/uid/rwx,iocharset=cp437 0 0
/dev/stl11 [b][u]/data rfs[/b][/u] rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=cp437 0 0
Cache seems nonexistent.
EDIT: Just so I'm not misunderstood. I still want to restore my nandroid backup. I only flashed stock from ODIN so I could use my phone.
GermainZ said:
I just used ODIN to go back to the stock ROM, so that might have changed something.
Currently:
Code:
/dev/stl9 [b][u]/system rfs[/b][/u] ro,relatime,vfat,log_off,check=no,gid/uid/rwx,iocharset=cp437 0 0
/dev/stl11 [b][u]/data rfs[/b][/u] rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=cp437 0 0
Cache seems nonexistent.
EDIT: Just so I'm not misunderstood. I still want to restore my nandroid backup. I only flashed stock from ODIN so I could use my phone.
Click to expand...
Click to collapse
Hmm . . . but when you create a backup which recovery you used? RZR, CWM 5.0.2.8 or CWM 5.0.2.6 temp?
Alucard1989pl said:
Hmm . . . but when you create a backup which recovery you used? RZR, CWM 5.0.2.8 or CWM 5.0.2.6 temp?
Click to expand...
Click to collapse
I feel kind of stupid not looking at the nandroid backup now that I just did.
When I did the backup, my system/cache/data were in ext4 format.
Also, I did it using rafael's permanent CWM, so I think that would be 5.0.2.8.
Fixed the issue by flashing Rafael's latest kernel (E3 version) then using temp CWM to restore.
Didn't really fix anything as I think I soft bricked my phone again.
EDIT: Fixed it by doing a clean install and using Titanium Backup to restore from my nandroid backup.
U can use cwm 5.0.4 that type of version which is still there in android development section.that is good.
Sent from my Galaxy Ace i using xda premium
GermainZ said:
Fixed the issue by flashing Rafael's latest kernel (E3 version) then using temp CWM to restore.
Didn't really fix anything as I think I soft bricked my phone again.
EDIT: Fixed it by doing a clean install and using Titanium Backup to restore from my nandroid backup.
Click to expand...
Click to collapse
That's a boot partition error
Flash firmware through Odin and don't forget to tick re-partition
Sometimes just flashing Boot loader file fixes everything
Edit:
Sorry
Didn't saw you fixed it
GermainZ said:
My current CWM is giving me errors mounting /system and /data, and I can't restore my nandroid backup.
Anyway to do it using another CWM (link, please), or any way at all? So far, everything I've read says another CWM version won't work (well, that and there aren't many choices on our device).
EDIT: Fixed it by doing a clean install and using Titanium Backup to restore from my nandroid backup.
Click to expand...
Click to collapse
I had the same problem...when i flashed the latest kernel with permanent CWM. I did the same. Did a clean install then flashed the e3 kernel. I guess clean install requires a new stock kernel to be flashed over it...to solve the issue
.
Sent from something which calls itself an Ace with an I.
Problems restoring a nandroid backup
Hi,
I hope it's ok to post my troubles just right here. Sorry for any inconvenience.
my phone is a XT910 with Android 2.3.6 my phone is rooted and I needed to go back to factory settings.
I have never experimented with any other roms. the stock rom (factory settings) work ok.
Now I try to restore a backup I made with "online-nandroid". Rom manager says CWM 3+ is used for my phone.
When I try to get int recovery mode, the screen stops with a driangle with an exclamation mark in it.
the only way to move on is to press vol up and vol down. That's how I get to a menu.
unfortunately I can't choose one of the two options:
- Android system recovery <3e>
and
- Android system recovery utility
a yellow
qe1/1
appears
as well.
I stuck - please help.
da.cappo said:
Hi,
I hope it's ok to post my troubles just right here. Sorry for any inconvenience.
my phone is a XT910 with Android 2.3.6 my phone is rooted and I needed to go back to factory settings.
I have never experimented with any other roms. the stock rom (factory settings) work ok.
Now I try to restore a backup I made with "online-nandroid". Rom manager says CWM 3+ is used for my phone.
When I try to get int recovery mode, the screen stops with a driangle with an exclamation mark in it.
the only way to move on is to press vol up and vol down. That's how I get to a menu.
unfortunately I can't choose one of the two options:
- Android system recovery <3e>
and
- Android system recovery utility
a yellow
qe1/1
appears
as well.
I stuck - please help.
Click to expand...
Click to collapse
Wrong section
If you are mounting error, is a corrupted partition.
Flash a ROM with Bootloader File (BOOT_... or DefaultCalBootWithData), select pit and repartition
Hi everyone,
I don't like to post here, as I prefer to find the thinks by my self,
but this is an urgent case,
I was running foxhound + boeflla kernel witch I read that support swap, and I'm trying to get this work,
i download the app called : swapper 2 or something like that, I ticked some options on the app, and PUF my phone restart and stick at bootlogo, I can enter in CWM and Download mod,
1- I tried to flash the combo that contain all the files ( mix.pit, bootimage, rom, csc and modem ), and tick re-partition, but still at bootlogo,
2- my s3 go until the samsung bootlogo ( pass the samsung galaxy s3 gt-I9300 ) but stick there, i've tryed a lot of things, even in CWM, like do a full wipe and install other rom, or make and nandroid recovery, but nothing happened
3- when i try to do a full wipe on CWM I get a mensage E: /data partition can't mount, if I try to mount /sdcard the CWM retorns the same mensage, somethimes it shows E: failed to mount /efs (invalid argument)
so, my phone is bricked ?, the only way is to do a unbrick JTAG ?
:crying:
Could someone please help-me ? =/
if someone have tha correct pit file for international SGS3 16 gb, i found a lot of files but none have a functional link,
sorry for my bad english if I have a mistake .....
Re: [HELP] Please help with: Can't mount /data and internal storage
Why would you mess with your phone if you have no idea what you're doing?
restore your efs for starters. google how
hi,
my internal sd card is currupted, i can acces the others partitions like /system etc, but i cant acces the /data and /efs,
my phone stick on bootloop, why can I restore the efs partition ?, I have tried to restore to stock in Odin, they show pass but the phone stick on boot ( samsung logo ).
if don't want to help please dont be rudge, i'm not a noob, and not just because I'm new I do not know what I'm doing...
any way, is there a chance to flash a rom, and start it in external storage ? i see that if i change some parts of a kernel and repack it i can do this.......
i was searching a lot on google, and nothing can help me, that's why i post here !
please someone that are expert, help me !
U have deleted EFS folder ( i had the same problem this weekend, send my s3 to servise.) Try installing (first that u had) stock rom 4.0.4 and install whith odin. If u have your efs folder backedup is the best solution.
Sent from my GT-I9300 using xda app-developers app
However if you don't have your /efs folder then... BRICK. Your last choice is probably some restore options like repartitioning of /sdcard (option from CWM/PhilZ) but if that doesn't help then game over.
Enea307 said:
U have deleted EFS folder ( i had the same problem this weekend, send my s3 to servise.) Try installing (first that u had) stock rom 4.0.4 and install whith odin. If u have your efs folder backedup is the best solution.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thank's for the answers,
You mean that flash android 4.0.4 can make something diferent than the 4.1.2 ?
i have a backup of my efs partition, but the problem is that i can't boot my phone, only recovery and download, and i have tried to partition my internal sd with CWM and with PIT file on odin, but nothing happen =/
I think that the only way is to buy an JTAG kit and make a unbrick process, someone have another idea to solve my problem ? my phone is under warranty but my flash counter show 6, is there a way to reset the flash counter to 0 using Odin or CWM ???
this will be a very hopefull information, please if someone know how to reset the flash counter usin only Odin or CWM tell me !!!
thanks again !
nobody ? =/
Did you try?
http://forum.xda-developers.com/showthread.php?t=2197515
And this?
http://forum.xda-developers.com/showthread.php?t=1703488
I have the same problem. Also I can mount /efs but not /data. My phone doesn't go past i9300 splash screen and keeps on rebooting. Any help is greatly appreciated.
You will have to help yourself by reading and experimenting, there is no instant solution.
Sent from my GT-I9300 using Tapatalk
karanfire123 said:
I have the same problem. Also I can mount /efs but not /data. My phone doesn't go past i9300 splash screen and keeps on rebooting. Any help is greatly appreciated.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s3/help/s3-stuck-boot-loop-help-t2737707
Same here, still didn't found how to fix it.. I guess our motherboard just died..
Howewer I have a solution that "almost" worked for me.
Get a stock firmware in odin and turn on Nand erase and T-flash
When it's done phone reboots and you'll see just "Downloading..." mode when you turn it on.
Then got to Kies and Select firmware recovery...
Enter s/n and model name and wait for the flash to complete.
With it , I got past boot logo and actually booted into android but the phone crashed because I guess I have a memory issue..
Well , gl. If you don't find anything else helpful , try going with this method..
there is soulution for this look in cwm-mount/unmount-format data,sd,.... last option and after reinstall sys using odin to oryginal android or some custoom room if rooted (offcourse):good: i just did like this and it workd !! boot screen some seconds and please enter pin code
krajowa said:
there is soulution for this look in cwm-mount/unmount-format data,sd,.... last option and after reinstall sys using odin to oryginal android or some custoom room if rooted (offcourse):good: i just did like this and it workd !! boot screen some seconds and please enter pin code
Click to expand...
Click to collapse
This actually worked! Thank you for posting this. That option in CWM was the only one that actually recognized the /data and removed the corrupted image/preloader I flashed previously using the S5 SIII rom.:victory:
Thanks again.
Solution
MY GREAT SOLUTION TO SAVE YOUR /DATA PARTITION FILES:
MY GREAT SOLUTION TO SAVE YOUR /DATA PARTITION FILES:
MY GREAT SOLUTION TO SAVE YOUR /DATA PARTITION FILES:
dropbox com/s/v0lfolrvgxwgbnx/Instruction.txt?dl=0
I had this same issue, but I solved it now running DeoDex 8.1 with Magisk and TWRP.
Basically, this is a brick, but Knox doesn't let you recover from it the normal way. As long as you can boot into TWRP you should be good. Usually caused by safety net issues.
Access TWRP. Select Wipe and then press format data. Once this is done you should be able to boot to your carrier logo or phone logo and be stuck.
Basically what's happening is your phone (Knox) is preventing you from rooting. This is a method Samsung uses to validate that damage to a phone was from Custom Rom, Custom Recovery, Root, etc. Samsung doesn't have permission to void your warranty without proof that the brick was directly from the mod/hack.
In order to bypass this you need to trick the phone to think you undid it, even though you didn't. First off, boot into Odin. It cannot be done through recovery, as that skips a step. Next you'll want to press Volume Down (Cancel (Reboots Phone)). You will be on the logo for a while, than you should see a loading symbol. Once booted into android, you'll want to boot back into recovery.
From here, you want to do I standard factory reset. Once that is done, reboot. Once Android is up and running boot back into recovery.
Select Backup and make sure only the standard three options are selected. Press backup.
Go ahead and install your root, and if something happens press Restore and select your backup.
Cannot mount internal storage (or any other partition)
TechNash said:
I had this same issue, but I solved it now running DeoDex 8.1 with Magisk and TWRP.
Basically, this is a brick, but Knox doesn't let you recover from it the normal way. As long as you can boot into TWRP you should be good. Usually caused by safety net issues.
Access TWRP. Select Wipe and then press format data. Once this is done you should be able to boot to your carrier logo or phone logo and be stuck.
Basically what's happening is your phone (Knox) is preventing you from rooting. This is a method Samsung uses to validate that damage to a phone was from Custom Rom, Custom Recovery, Root, etc. Samsung doesn't have permission to void your warranty without proof that the brick was directly from the mod/hack.
In order to bypass this you need to trick the phone to think you undid it, even though you didn't. First off, boot into Odin. It cannot be done through recovery, as that skips a step. Next you'll want to press Volume Down (Cancel (Reboots Phone)). You will be on the logo for a while, than you should see a loading symbol. Once booted into android, you'll want to boot back into recovery.
From here, you want to do I standard factory reset. Once that is done, reboot. Once Android is up and running boot back into recovery.
Select Backup and make sure only the standard three options are selected. Press backup.
Go ahead and install your root, and if something happens press Restore and select your backup.
Click to expand...
Click to collapse
Can you please describe in a little more detail how you managed to trick the Knox system? I have an I9305 where neither internal och external storage is possible to mount. I can boot TWRP but every try to wipe or format the system is failing because one cannot mount the storage. I also can put the phone in download mode and connect to Odin, but the same happens, that every operation fails... probably because the internal storage cannot be mounted. In download mode I can see that the Knox flag is activated, and I hope that your trick can help to get access to the internal storage again. Can you please tell step by step how you did it? What does "boot into Odin" mean? Can it be done differently than starting Odin and connect the phone in Download mode?
perwhis said:
Can you please describe in a little more detail how you managed to trick the Knox system? I have an I9305 where neither internal och external storage is possible to mount. I can boot TWRP but every try to wipe or format the system is failing because one cannot mount the storage. I also can put the phone in download mode and connect to Odin, but the same happens, that every operation fails... probably because the internal storage cannot be mounted. In download mode I can see that the Knox flag is activated, and I hope that your trick can help to get access to the internal storage again. Can you please tell step by step how you did it? What does "boot into Odin" mean? Can it be done differently than starting Odin and connect the phone in Download mode?
Click to expand...
Click to collapse
Sorry if I was confusing.
Basically what I meant was boot up the phone into Download mode, and once at the screen instead of pressing volume up, press volume down, and you shouldn't see the original error anymore.
TechNash said:
Sorry if I was confusing.
Basically what I meant was boot up the phone into Download mode, and once at the screen instead of pressing volume up, press volume down, and you shouldn't see the original error anymore.
Click to expand...
Click to collapse
Thanks for the clarification. I have now tried that, but unfortunately the phone is still stuck on the first boot screen, and TWRP is not able to mount any storage.
perwhis said:
Thanks for the clarification. I have now tried that, but unfortunately the phone is still stuck on the first boot screen, and TWRP is not able to mount any storage.
Click to expand...
Click to collapse
When you say any storage, do you mean it is all unmountable, or do you mean the certain ones are unmountable, and the rest are listed as 0b?
Anyways, there are many more options, the only problem is most of them do in fact require you to lose your data. Hopefully you allowed Google to automatically back up your Android device, and if so you won't lose any data. Check out this thread, but it is designed for the J7, so when you download something, make sure it is designed for the Samsung Galaxy S III 19300/19305.
https://forum.xda-developers.com/ga...t/how-to-recover-verification-failed-t3775722
Hi everyone,
An acquaintance has brought his gf's i9300 to me because he needs help. Him and his gf went on a trip somewhere. She took a bunch of photos. She stored them on the internal storage rather than the SD card. At some point, she tried to apply an OTA update and now it's stuck at the Samsung logo. I believe the update got corrupted or maybe she let the phone die while it was applying... Something obviously went wrong. He's hoping I can get it to boot without losing the pictures.
I know I can flash an Odin image but I'm pretty sure that will wipe what they want. There is a thread here on XDA that says some Odin images won't erase data, but the files are out of date (they are ICS).
I did go in to recovery and try to apply the update.zip from cache but it failed.
Can anyone just provide me with the update.zip of the most current OTA for the Hong Kong version of the i9300?
One other thing to note, when I go in to recovery it says it has CSC XFE. According to another XDA thread, that's supposed to be the region code for South Africa.
Any help is appreciated.
Pretty sure all roms don't wipe data on sammobile.com but further confirmation needed.
Anyway, sammobile.com is where you need to be
Not sure if you can use mskip's unified toolbox to pull the data off the /sdcard
Sent from my GT-I9300 using Tapatalk 2
rootSU said:
Pretty sure all roms don't wipe data on sammobile.com but further confirmation needed.
Anyway, sammobile.com is where you need to be
Not sure if you can use mskip's unified toolbox to pull the data off the /sdcard
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Sam Mobile does not have the Hong Kong ROM.
The unified toolbox requires the phone to be booted to Android.
I did download the ZSDLL1 HK based firmware that can be flashed in Odin, but I'm not going to flash it unless I know for a fact it won't erase their pictures. It would be awesome if I could just download the update.zip, throw it on an SD card, and apply it from there.
Doing a lot of searching online but there is so much conflicting information...
rockingondrums said:
Doing a lot of searching online but there is so much conflicting information...
Click to expand...
Click to collapse
If you've got access to Recovery you can try to do a nandroid backup before trying anything else, then I think you may be able to get the pictures from the data folder in the nandroid.
The phone is stock, non root. Everything is stock. It's his gf's phone. Are the S3s sold in Hong Kong bootloader unlocked from the factory? If so, I might just unlock the bootloader, flash a custom recovery like twrp, mount the internal storage as a drive, and copy the files over. Though I think I'll run in to issues trying to mount to the PC due to lack of USB mass storage support...
There are some data recovery apps on play store, and they are fairly effective, so even if the phone gets wiped you should be able to recover most pictures......just remember to try data recovery app before you start filling up your internal sd as it will only recover deleted data that hasn't been overwritten
There's no way you can apply an update.zip now. The process failed, breaking the os. Its all or nothing I'm afraid.
Sent from my GT-I9300 using Tapatalk 2
---------- Post added at 07:39 AM ---------- Previous post was at 07:34 AM ----------
Also if you do flash a custom recovery, you can use the unified toolkit to perform an adb pull (option 11) whilst connected in recovery mode if all else fails.
I just cant see how you'll get back to HK stock
Sent from my GT-I9300 using Tapatalk 2
Try this:
Download the .tar version of a custom recovery (I recommend PhilZ's CWM recovery). Flash it via Odin. This won't touch the data partition.
Now you can try and see whether you can connect the phone to the computer, mount the internal sdcard, and transfer out the data required.
If that doesn't work:
Using the custom recovery, try flashing the update.zip again. Else, download a stock firmware based custom ROM (maybe something on the smaller side, such as Wanam's de-bloated/light custom ROMs), put it into your external SD Card, and flash it using the recovery. Wipe the cache and dalvik cache, and reboot your phone.
Now, you can take the pictures out, onto your computer.
To flash back to a completely stock setup: first use Triangle Away by Chainfire to reset the binary counter, then get into download mode and Odin flash your region's firmware to get back to stock.
All the best man!
Sent from my GT-I9300
rootSU said:
There's no way you can apply an update.zip now. The process failed, breaking the os. Its all or nothing I'm afraid. Also if you do flash a custom recovery, you can use the unified toolkit to perform an adb pull (option 11) whilst connected in recovery mode if all else fails.
I just cant see how you'll get back to HK stock
Click to expand...
Click to collapse
Yeah that looks like the best course of action. All that matters is trying to get the pics. I think after that they don't care if I reflash via Odin. Of course, if it's impossible I'm just going to tell them and offer to restore stock firmware which I've already downloaded.
Erahgon said:
Try this:
Download the .tar version of a custom recovery (I recommend PhilZ's CWM recovery). Flash it via Odin. This won't touch the data partition.
Now you can try and see whether you can connect the phone to the computer, mount the internal sdcard, and transfer out the data required.
If that doesn't work:
Using the custom recovery, try flashing the update.zip again. Else, download a stock firmware based custom ROM (maybe something on the smaller side, such as Wanam's de-bloated/light custom ROMs), put it into your external SD Card, and flash it using the recovery. Wipe the cache and dalvik cache, and reboot your phone.
Now, you can take the pictures out, onto your computer.
To flash back to a completely stock setup: first use Triangle Away by Chainfire to reset the binary counter, then get into download mode and Odin flash your region's firmware to get back to stock.
All the best man!
Sent from my GT-I9300
Click to expand...
Click to collapse
These sound like a great idea. I'm already familiar with recoveries, I have Odin, I have the triangle away apk already (although it requires root).... I mean I myself have a USA variant of the S3. I'm pretty sure mounting in recovery is the only chance.
My only worry is that I seem to remember not being able to do this with my Verizon variant for some reason...
Also, if you can help me find the update.zip that would be much appreciated.
Thank you!
If you specifically use Philz recovery (link in my signature) that @Erahgon suggested, if you go into "Mounts and storage" you can use "mount /data".
From here, (assuming you're set up to use adb) you can use the following commands in windows cmd or Linux terminal:
Code:
adb pull /data/media/DCIM c:\users\myusername\Desktop
The "Mount /sdcard" options in recovery wont help.
OR, if you have an external SD card, you can follow the Instructions for Philz recovery to put aroma filemanager on the sdcard. This allows you to use a file manager from inside Philz recovery. You action this (once you have the zip in the correct place on external sdcard) Philz Settings > Aroma File manager.
Within there, you'll be able to copy the DCIM folder to external SD easily.
rootSU said:
If you specifically use Philz recovery (link in my signature) that @Erahgon suggested, if you go into "Mounts and storage" you can use "mount /data".
From here, (assuming you're set up to use adb) you can use the following commands in windows cmd or Linux terminal:
Code:
adb pull /data/media/DCIM c:\users\myusername\Desktop
The "Mount /sdcard" options in recovery wont help.
OR, if you have an external SD card, you can follow the Instructions for Philz recovery to put aroma filemanager on the sdcard. This allows you to use a file manager from inside Philz recovery. You action this (once you have the zip in the correct place on external sdcard) Philz Settings > Aroma File manager.
Within there, you'll be able to copy the DCIM folder to external SD easily.
Click to expand...
Click to collapse
Wow thanks for this idea. But I went ahead and took care of it in a more roundabout way, which I'll detail for a future searcher.
I flashed Philz recovery. Then I flashed a ROM that was basically stock rooted. Then I gave the phone back. I didn't want to keep their phone too long. I figured that she got her data and hopefully maybe the inconvenience of having to restore apps along with this incident would teach her to store pics on an external from now on. The ROM also came with a 50 GB dropbox bonus, so I told them to sign up for that and start using it.
I remembered through research that custom recoveries will leave data/media alone (or internal sd) while still erasing all user apps when doing factory reset. And installing custom ROMs also leaves that alone. It took me numerous flashes, but I already had triangle away so I used that. The counter is unfortunately stuck at 1, but I asked first if they planned on keeping the phone or getting warranty service. They planned on keeping it, so I just told them if they ever needed to warranty it or something to just bring it back to me.
I also made sure to set SuperSU to deny root by default (except triangle away)... There was no way I was going to leave that power unchecked in her hands.
Thank you again for the help, everyone. When I get a chance I'll report my own thread to get it locked.
If any future searcher finds this and has questions, PM me.
Yup new bootloaders increment flash counter back to 1 every boot.
Have to prevent triangle away from booting the device once its done the deed. Them flash stock from Odin
Sent from my GT-I9300 using Tapatalk 2
Hello guys,
yesterday i tried to install a rom, i accidentally formatted everything (including internal storage) and when i tried to reboot; it didn't. I just tried to install a stock rom with SM-G925F BUT not corresponding country of mine (on kies3 mine has AFG in paranthesis .wtf. ?), then i downloaded firmware from sammobile which has name;
G925FXXU2BOGB_G925FOJV2BOG8_G925FXXU2BOGE_HOME.tar
I kept flashing this rom and twrp recovery to reach into adb mode to flash any rom to just save my ass from losing efs/imei even if i did. But it doesnt.
To tell the problem in a way more understandable way;
The device cant boot itself.
I cant reach it from mtp or adb.
I can only get in download mode. whatever i do flash doesnt work.
it also says that cant mount efs (this part is im scared of.)
EDIT: I dont have any backup of efs.
The phone was 5.1.1 also tried to downgrade.
also tried flashing g925f pit file
EDIT2: Bought otg and flashed another rom but still the same issue... Please help me guys...
EDIT3: The Required download links will be on the top of the OP
Thanks for answers!
Did you try to flash stock firmware with Odin ?
DocFreeDom said:
Did you try to flash stock firmware with Odin ?
Click to expand...
Click to collapse
yes I did, I also tried different kinds of roms for g925f to just make sure. I also fetched the rom that smartswitch wanted to flash; which means I have already tried all the methods from the choices of a noob like me ( if i get to this point this means im noob ) will ever know.
I will appreciate a help to unbrick my phone so i can enjoy my beer with him
vanderax said:
Hello guys,
yesterday i tried to install a rom, i accidentally formatted everything (including internal storage) and when i tried to reboot; it didn't. I just tried to install a stock rom with SM-G925F BUT not corresponding country of mine (on kies3 mine has AFG in paranthesis .wtf. ?), then i downloaded firmware from sammobile which has name;
G925FXXU2BOGB_G925FOJV2BOG8_G925FXXU2BOGE_HOME.tar
I kept flashing this rom and twrp recovery to reach into adb mode to flash any rom to just save my ass from losing efs/imei even if i did. But it doesnt.
To tell the problem in a way more understandable way;
The device cant boot itself.
I cant reach it from mtp or adb.
I can only get in download mode. whatever i do flash doesnt work.
it also says that cant mount efs (this part is im scared of.)
EDIT: I dont have any backup of efs.
The phone was 5.1.1 also tried to downgrade.
also tried flashing g925f pit file
EDIT2: Bought otg and flashed another rom but still the same issue... Please help me guys...
Thanks for answers!
Click to expand...
Click to collapse
Hi
i had a big problem with anability to mount any partitions through the flashed TWRP recovery i had on the S6 edge, lucky me i had a full backup including the EFS partition, and could either boot into download mode or TWRP, but as you unable to flash anything properly.
Odin, flash multiple roms...
Samsung Smart Switch and kies, emergency recovery providing the model + serial number failed
To top it all, i had reactivation locked enabled....
Now for the EFS, if you are able to get TWRP installed and running from it mount a USB OTG and backup the EFS partition
Here are links for Kernel by Alex-V
https://www.androidfilehost.com/?fid=24052804347765201
TWRP from Team Win
https://dl.twrp.me/zeroflte/
You would need to root after that, but thats not your problem at the moment, and for me the kernel is needed or else i will stay stuck and can only go into downoad mode
When almost everything for me was at the point i had hard bricked my phone i fixed it with Odin in the end
Firmware SM-G925F / G925FXXU2COH2
http://samsung-firmware.org/download/Galaxy S6 edge/31bd/XEU/G925FXXU2COH2/G925FOXA2COH2/
At first this also did not work, but i kept looking and was thinking if it cant mount anything, partitions might and probably were corrupted
PIT files that can be used, normal and ones with different HIDDEN sizes
http://forum.xda-developers.com/gal...925-pit-files-multi-thread-download-t3171636/
For me the first standard one failed at the hidden.img everytime until i used the last one which was
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
Flashed completed all the way and rebooted on its way to the android normal post flash install process
During the process it first complained about DATA partition being corrupted and needing to flush it, then rebbotted to complain about internal storage needing to also be flushed.
On the final reboot, it went all the way in to the normal setup, accounts etc.
At this point i was again stock and 100% fixed minus the EFS partition
At this point rebboted into download mode, flashed TWRP
Remember to copy the modded Alex-V kernel and the super-su zip files if you want to avoid sweating some more!!
I plugged my USB OTG with my full TWRP nandroid backup and restored it all, EFS included, at this point the state of the S6 was again 100% operational
Hope this helps you and others.
PS. Verify before flashing anything that those can be used on your phone or if not find the equivalent files you need to do so.
The culprit that caused the problem to start with was stickmount app by chainfire who makes Super-SU!!
What happened is i instaled it, then it told me it needed to copy some extra files, at that point during the copy, the S6 rebooted and was stuck in an endless bootloop
That happened with the abobe firmware linked above, using that kernel and that version of TWRP flashed on the phone with Super-SU 2.46 installed
Even going with Aroma Explorer and deleting everything i could find on the phone related to stickmount did not fix the problem
Z0D said:
Hi
i had a big problem with anability to mount any partitions through the flashed TWRP recovery i had on the S6 edge, lucky me i had a full backup including the EFS partition, and could either boot into download mode or TWRP, but as you unable to flash anything properly.
Odin, flash multiple roms...
Samsung Smart Switch and kies, emergency recovery providing the model + serial number failed
To top it all, i had reactivation locked enabled....
Now for the EFS, if you are able to get TWRP installed and running from it mount a USB OTG and backup the EFS partition
Here are links for Kernel by Alex-V
https://www.androidfilehost.com/?fid=24052804347765201
TWRP from Team Win
https://dl.twrp.me/zeroflte/
You would need to root after that, but thats not your problem at the moment, and for me the kernel is needed or else i will stay stuck and can only go into downoad mode
When almost everything for me was at the point i had hard bricked my phone i fixed it with Odin in the end
Firmware SM-G925F / G925FXXU2COH2
http://samsung-firmware.org/download/Galaxy S6 edge/31bd/XEU/G925FXXU2COH2/G925FOXA2COH2/
At first this also did not work, but i kept looking and was thinking if it cant mount anything, partitions might and probably were corrupted
PIT files that can be used, normal and ones with different HIDDEN sizes
http://forum.xda-developers.com/gal...925-pit-files-multi-thread-download-t3171636/
For me the first standard one failed at the hidden.img everytime until i used the last one which was
ZEROLTE_EUR_OPEN_HIDDEN300M.pit
Flashed completed all the way and rebooted on its way to the android normal post flash install process
During the process it first complained about DATA partition being corrupted and needing to flush it, then rebbotted to complain about internal storage needing to also be flushed.
On the final reboot, it went all the way in to the normal setup, accounts etc.
At this point i was again stock and 100% fixed minus the EFS partition
At this point rebboted into download mode, flashed TWRP
Remember to copy the modded Alex-V kernel and the super-su zip files if you want to avoid sweating some more!!
I plugged my USB OTG with my full TWRP nandroid backup and restored it all, EFS included, at this point the state of the S6 was again 100% operational
Hope this helps you and others.
PS. Verify before flashing anything that those can be used on your phone or if not find the equivalent files you need to do so.
The culprit that caused the problem to start with was stickmount app by chainfire who makes Super-SU!!
What happened is i instaled it, then it told me it needed to copy some extra files, at that point during the copy, the S6 rebooted and was stuck in an endless bootloop
That happened with the abobe firmware linked above, using that kernel and that version of TWRP flashed on the phone with Super-SU 2.46 installed
Even going with Aroma Explorer and deleting everything i could find on the phone related to stickmount did not fix the problem
Click to expand...
Click to collapse
will try this mate if it works for me too, we should open a new post or update this one to inform people
Update: Nothing worked until now. Does flashing a rom from an usb-otg or internal storage differ? Also I can't connect to computer via MTP or ADB... Need serious help guys.
Guys i have found why the phone is like this...
1) efs partition is deleted
2) emmc files are deleted
if anyone knows how to fix emmc please write here efs is easy to deal with....
vanderax said:
Guys i have found why the phone is like this...
1) efs partition is deleted
2) emmc files are deleted
if anyone knows how to fix emmc please write here efs is easy to deal with....
Click to expand...
Click to collapse
What variant do you have?
Sent from my SAMSUNG-SM-G925A using XDA Premium 4 mobile app
Mangtas_666 said:
What variant do you have?
Sent from my SAMSUNG-SM-G925A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have the SM-G925F mate
If anyone can help me solve this problem we are ready to drink some donated beer guys!
vanderax said:
I have the SM-G925F mate
If anyone can help me solve this problem we are ready to drink some donated beer guys!
Click to expand...
Click to collapse
Download the correct pit file and flash via odin after that flash the correct stock firmware http://forum.xda-developers.com/gal...925-pit-files-multi-thread-download-t3171636/
Sent from my SAMSUNG-SM-G925A using XDA Premium 4 mobile app
Mangtas_666 said:
Download the correct pit file and flash via odin after that flash the correct stock firmware http://forum.xda-developers.com/gal...925-pit-files-multi-thread-download-t3171636/
Sent from my SAMSUNG-SM-G925A using XDA Premium 4 mobile app
Click to expand...
Click to collapse
it doesnt flash because eMMC files "mmcblk0" are wiped.. Maybe a jtag issue. Is it possible to repair it without jtag?
If adb cannot detect it..i guess jtag is the only hope
Sent from my SAMSUNG-SM-G925A using XDA Premium 4 mobile app