Yesterday I rooted my LG Optimus L9 using LGpwn tool, after that it worked just fine.
This morning I tried to install ClockworkMod Recovery. Using this post. It explains how to download and install CWM Recovery from app that you downloaded in form of APK.
This method did not work 100%, but I was able to reboot normally, so in post it said that sometimes it does not work and you need to download and use Busybox installer Link to busyboxx.
After this I managed to boot in too CWM using app from mentioned thread.
Then problem occurred. After I saw CWM was working I selected reboot device option.
Except now when it started to boot it stops right after Second LG logo (First is static one second one is animated).
I get white screen with "Encrypting" on top and gray line. And one Reset Phone button. IMG they are Dropbox links.
This is followed with Error : Unfortunately, the process com.android.phone has stopped. IMG
I am able to boot in too CWM and I have tried flashing something like Cyanogenmod but I get error Status 7. Tried removing line that checks model, no use.
Tried clearing every cache and fixing permissions, nothing. Formatted everything still no use.
Dear XDA community That you in advance.
I fixed my phone by going into SW upgrade mode, and using the Upgrade Recovery function of the LG Software Update tool or whatever. Be sure you don't have any http servers open
Sent from my LG-P769 using XDA Premium 4 mobile app
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
pigmich said:
I got the same problem, but when I try to access to SW mode and connect to LG Software Update tool to restore my phone, the phone keep disconnect and the phone screen will turn off, so I fail to restore my phone, I have already re-install the USB driver and changed a several USB cable but the problem still, but I tried to restore my phone with SW upgrade method since last night and is was OK, can anyone help me?
---------------------------------------------------------------------------
The Problem Solve Finally, the solution is I plug the battery back to the phone after access to LGMobile Support Tool, and after finish the restore process, the phone will restart but keep boot loop, then I perform the hard reset (Remove the Battery and insert it after few seconds. And now do the 3 button HARD RESET. First press VOLUMEDOWN and HOMEbutton. Then Press Power button only for 3 seconds and release power button but dont release VolDown and Home button and KEEP BOTH PRESSING until you see a Bigger Green Standing Android and circulating Molecular structure above it. DONE! ), then the phone begin work~~~
Click to expand...
Click to collapse
I had this problem too...
You can also try, start upgrade tool, Remove battery -> press volume up + insert usb with upgrade tool open, it will detect, insert battery then go to extras and click upgrade-foutherstel (is in dutch for me)
Then it will all work, I can't even install a custom rom My bootloader is unlocked, rooted phone, installed recovery, see my thread about the error I get!! please!
help lg p768 encrypting error problem
can someone help me please.
i have the same problem from the starter of this thread..
installed recovery apk and goes to encrypting error.
i dont know what to do and how to begin to solve my phone problem.
thanks
Hello guys,
I've got a big problem with my I9300 and therefore I would like to ask here for any help. (If I'm in the wrong section, please move the thread to a correct one)
I had installed the Resurrection Remix ROM, v5.2.6. from 30.12.2014 and Googy-Max 2 recovery (CWM based) on my phone. I was using it for days and all worked fine.
One day I turned the phone off and I wanted to restart it. But it never restarted again; it ends up in a boot loop. It shows me the white Samsung Boot-Logo for some seconds, then a total black screen and the same thing repeats in a loop.
So I wanted to get into the recovery for wiping etc. but I couldn’t access the recovery. Nothing happens by pressing the relevant buttons. The device is still hanging in the boot loop. So I wanted to flash via Odin, but this isn't possible. I also can't go into the download mode. After pressing the relevant buttons, the green warning screen appears, which asks me if I really want to go to the download mode. But when I press volume up for "continue" or even if I don't press anything, the phone turns off and the boot loop with the white Samsung Logo starts again.
Therefore I ordered a USB JIG for forcing the device to go into download mode. When I plug the USB JIG in, the device actually goes into download mode but this status holds on only for a few seconds. After accessing download mode through the JIG, after a few seconds the phone turns off, restarts, (and because the JIG is still plugged in) the download mode appears again and it ends in a loop.
At first I thought maybe the power button is sticking and therefore the device turns on and off autonomous. But definitively I can negate it, because I opened the phone and removed the power button and nothing changed. Also by pressing the power button on the mainboard I can clearly hear the "click".
So I started a new attempt. Although the time, in which the device stays in download mode before turning off, is very short (only a few seconds), I tried flashing an other recovery, namely TWRP v2.8.3.0. So I prepared ODIN, plugged the JIG into the device, by appearing the download mode I switched cables and an other person clicked start at ODIN and it worked. So now TWRP is installed. Now I also can't get into recovery but after flashing TWRP there exist two little differences. First, after pressing the relevant buttons, TWRP appears for less than 1 second until the phone turns off. Secondly, when I plug the device in for charging, the Samsung charging logo appears for some seconds, then for less than 1 second appears a charging logo from Lollipop and the device ends up in a loop by displaying alternately the two different charging logos. Before flashing TWRP, the device booted in a boot loop (as I wrote above) by plugging it in for charging.
So the main question: how can I get my device work again
I tried telling you all details so that you have a better view of the problem.
Maybe I should flash a fully (stock) rom, but as I told you the download mode appears only for a few seconds. Flashing a recovery was possible, because the recovery file is very small - 7 MB. A full rom is much bigger and I think by flashing a complete rom, the device would turn off while Odin is flashing, therefore I ask first here for any assistance.
Thank you very much in advance!
beginnerteur said:
Hello guys,
I've got a big problem with my I9300 and therefore I would like to ask here for any help. (If I'm in the wrong section, please move the thread to a correct one)
I had installed the Resurrection Remix ROM, v5.2.6. from 30.12.2014 and Googy-Max 2 recovery (CWM based) on my phone. I was using it for days and all worked fine.
One day I turned the phone off and I wanted to restart it. But it never restarted again; it ends up in a boot loop. It shows me the white Samsung Boot-Logo for some seconds, then a total black screen and the same thing repeats in a loop.
So I wanted to get into the recovery for wiping etc. but I couldn’t access the recovery. Nothing happens by pressing the relevant buttons. The device is still hanging in the boot loop. So I wanted to flash via Odin, but this isn't possible. I also can't go into the download mode. After pressing the relevant buttons, the green warning screen appears, which asks me if I really want to go to the download mode. But when I press volume up for "continue" or even if I don't press anything, the phone turns off and the boot loop with the white Samsung Logo starts again.
Therefore I ordered a USB JIG for forcing the device to go into download mode. When I plug the USB JIG in, the device actually goes into download mode but this status holds on only for a few seconds. After accessing download mode through the JIG, after a few seconds the phone turns off, restarts, (and because the JIG is still plugged in) the download mode appears again and it ends in a loop.
At first I thought maybe the power button is sticking and therefore the device turns on and off autonomous. But definitively I can negate it, because I opened the phone and removed the power button and nothing changed. Also by pressing the power button on the mainboard I can clearly hear the "click".
So I started a new attempt. Although the time, in which the device stays in download mode before turning off, is very short (only a few seconds), I tried flashing an other recovery, namely TWRP v2.8.3.0. So I prepared ODIN, plugged the JIG into the device, by appearing the download mode I switched cables and an other person clicked start at ODIN and it worked. So now TWRP is installed. Now I also can't get into recovery but after flashing TWRP there exist two little differences. First, after pressing the relevant buttons, TWRP appears for less than 1 second until the phone turns off. Secondly, when I plug the device in for charging, the Samsung charging logo appears for some seconds, then for less than 1 second appears a charging logo from Lollipop and the device ends up in a loop by displaying alternately the two different charging logos. Before flashing TWRP, the device booted in a boot loop (as I wrote above) by plugging it in for charging.
So the main question: how can I get my device work again
I tried telling you all details so that you have a better view of the problem.
Maybe I should flash a fully (stock) rom, but as I told you the download mode appears only for a few seconds. Flashing a recovery was possible, because the recovery file is very small - 7 MB. A full rom is much bigger and I think by flashing a complete rom, the device would turn off while Odin is flashing, therefore I ask first here for any assistance.
Thank you very much in advance!
Click to expand...
Click to collapse
Check and make sure that your volume buttons and home button are not stuck also. If they are not, I would suggest a visit to a repair shop as your EMMC chip might be weak already.
beginnerteur said:
Hello guys,
I've got a big problem with my I9300 and therefore I would like to ask here for any help. (If I'm in the wrong section, please move the thread to a correct one)
I had installed the Resurrection Remix ROM, v5.2.6. from 30.12.2014 and Googy-Max 2 recovery (CWM based) on my phone. I was using it for days and all worked fine.
One day I turned the phone off and I wanted to restart it. But it never restarted again; it ends up in a boot loop. It shows me the white Samsung Boot-Logo for some seconds, then a total black screen and the same thing repeats in a loop.
So I wanted to get into the recovery for wiping etc. but I couldn’t access the recovery. Nothing happens by pressing the relevant buttons. The device is still hanging in the boot loop. So I wanted to flash via Odin, but this isn't possible. I also can't go into the download mode. After pressing the relevant buttons, the green warning screen appears, which asks me if I really want to go to the download mode. But when I press volume up for "continue" or even if I don't press anything, the phone turns off and the boot loop with the white Samsung Logo starts again.
Therefore I ordered a USB JIG for forcing the device to go into download mode. When I plug the USB JIG in, the device actually goes into download mode but this status holds on only for a few seconds. After accessing download mode through the JIG, after a few seconds the phone turns off, restarts, (and because the JIG is still plugged in) the download mode appears again and it ends in a loop.
At first I thought maybe the power button is sticking and therefore the device turns on and off autonomous. But definitively I can negate it, because I opened the phone and removed the power button and nothing changed. Also by pressing the power button on the mainboard I can clearly hear the "click".
So I started a new attempt. Although the time, in which the device stays in download mode before turning off, is very short (only a few seconds), I tried flashing an other recovery, namely TWRP v2.8.3.0. So I prepared ODIN, plugged the JIG into the device, by appearing the download mode I switched cables and an other person clicked start at ODIN and it worked. So now TWRP is installed. Now I also can't get into recovery but after flashing TWRP there exist two little differences. First, after pressing the relevant buttons, TWRP appears for less than 1 second until the phone turns off. Secondly, when I plug the device in for charging, the Samsung charging logo appears for some seconds, then for less than 1 second appears a charging logo from Lollipop and the device ends up in a loop by displaying alternately the two different charging logos. Before flashing TWRP, the device booted in a boot loop (as I wrote above) by plugging it in for charging.
So the main question: how can I get my device work again
I tried telling you all details so that you have a better view of the problem.
Maybe I should flash a fully (stock) rom, but as I told you the download mode appears only for a few seconds. Flashing a recovery was possible, because the recovery file is very small - 7 MB. A full rom is much bigger and I think by flashing a complete rom, the device would turn off while Odin is flashing, therefore I ask first here for any assistance.
Thank you very much in advance!
Click to expand...
Click to collapse
Your power button is failing, stuck in 'pressed' position. Try pressing repeatedly power button for several seconds, then release it completely. It shall bring it back to life. Visit your local service, or prepare tin, heat gun and soldering pistol. One button cost $0.2, they are selling them on eBay in sets of three (and 10, and 100....).
Happened to me some time ago, and video on youtube helped me to dismantle my phone, pull broken button out of it, and change it for new.
My phone was cycling like yours.
beginnerteur said:
Hello guys,
I've got a big problem with my I9300 and therefore I would like to ask here for any help. (If I'm in the wrong section, please move the thread to a correct one)
I had installed the Resurrection Remix ROM, v5.2.6. from 30.12.2014 and Googy-Max 2 recovery (CWM based) on my phone. I was using it for days and all worked fine.
One day I turned the phone off and I wanted to restart it. But it never restarted again; it ends up in a boot loop. It shows me the white Samsung Boot-Logo for some seconds, then a total black screen and the same thing repeats in a loop.
So I wanted to get into the recovery for wiping etc. but I couldn’t access the recovery. Nothing happens by pressing the relevant buttons. The device is still hanging in the boot loop. So I wanted to flash via Odin, but this isn't possible. I also can't go into the download mode. After pressing the relevant buttons, the green warning screen appears, which asks me if I really want to go to the download mode. But when I press volume up for "continue" or even if I don't press anything, the phone turns off and the boot loop with the white Samsung Logo starts again.
Therefore I ordered a USB JIG for forcing the device to go into download mode. When I plug the USB JIG in, the device actually goes into download mode but this status holds on only for a few seconds. After accessing download mode through the JIG, after a few seconds the phone turns off, restarts, (and because the JIG is still plugged in) the download mode appears again and it ends in a loop.
At first I thought maybe the power button is sticking and therefore the device turns on and off autonomous. But definitively I can negate it, because I opened the phone and removed the power button and nothing changed. Also by pressing the power button on the mainboard I can clearly hear the "click".
So I started a new attempt. Although the time, in which the device stays in download mode before turning off, is very short (only a few seconds), I tried flashing an other recovery, namely TWRP v2.8.3.0. So I prepared ODIN, plugged the JIG into the device, by appearing the download mode I switched cables and an other person clicked start at ODIN and it worked. So now TWRP is installed. Now I also can't get into recovery but after flashing TWRP there exist two little differences. First, after pressing the relevant buttons, TWRP appears for less than 1 second until the phone turns off. Secondly, when I plug the device in for charging, the Samsung charging logo appears for some seconds, then for less than 1 second appears a charging logo from Lollipop and the device ends up in a loop by displaying alternately the two different charging logos. Before flashing TWRP, the device booted in a boot loop (as I wrote above) by plugging it in for charging.
So the main question: how can I get my device work again
I tried telling you all details so that you have a better view of the problem.
Maybe I should flash a fully (stock) rom, but as I told you the download mode appears only for a few seconds. Flashing a recovery was possible, because the recovery file is very small - 7 MB. A full rom is much bigger and I think by flashing a complete rom, the device would turn off while Odin is flashing, therefore I ask first here for any assistance.
Thank you very much in advance!
Click to expand...
Click to collapse
As said your emmc chip maybe failing.
The dead boot thread maybe of interest to you.
Virnik0 said:
Your power button is failing, stuck in 'pressed' position. Try pressing repeatedly power button for several seconds, then release it completely. It shall bring it back to life. Visit your local service, or prepare tin, heat gun and soldering pistol. One button cost $0.2, they are selling them on eBay in sets of three (and 10, and 100....).
Happened to me some time ago, and video on youtube helped me to dismantle my phone, pull broken button out of it, and change it for new.
My phone was cycling like yours.
Click to expand...
Click to collapse
He said he has tested this and can also hear the micro-switch clicking.
scorpionhd2 said:
Check and make sure that your volume buttons and home button are not stuck also. If they are not, I would suggest a visit to a repair shop as your EMMC chip might be weak already.
Click to expand...
Click to collapse
Virnik0 said:
Your power button is failing, stuck in 'pressed' position. Try pressing repeatedly power button for several seconds, then release it completely. It shall bring it back to life. Visit your local service, or prepare tin, heat gun and soldering pistol. One button cost $0.2, they are selling them on eBay in sets of three (and 10, and 100....).
Happened to me some time ago, and video on youtube helped me to dismantle my phone, pull broken button out of it, and change it for new.
My phone was cycling like yours.
Click to expand...
Click to collapse
Darke5tShad0w said:
As said your emmc chip maybe failing.
The dead boot thread maybe of interest to you.
He said he has tested this and can also hear the micro-switch clicking.
Click to expand...
Click to collapse
Thank you very much for helping! :good:
So the question is, whether it's the power button's or emmc's fault...
I did a little searching and found this video. I've got exactly the same problem like the guy. At 1:06 following the boot loop, at 1:34 following the problem with downlod mode.
Although he thinks it's caused to the sudden death problem, but at least in my case I think it's wrong because months ago I did the eMMC Brickbug Check.
Also I noticed a probably important detail. When I put the battery in the phone, it automatically turns on without pressing the power button like in 1:04-1:09 in the video. Which normal working phone turns itself on by simply putting in the battery...?
So it must get a command for turning on - (possibly through a defect power button?)
@Virnik0, do you remember, if you could hear the micro-switch clicking on your phone before replacing the button on the mainboard?
beginnerteur said:
Also I noticed a probably important detail. When I put the battery in the phone, it automatically turns on without pressing the power button
Click to expand...
Click to collapse
Your power button is faulty, replace it before you try fixing anything else.
Thank you very, very much for helping! :good: :good: :good:
Truly the power button was fault although you could hear clearly the "click".
I unsoldered and removed the power module and (by startig with JIG and rebooting via ADB) the phone works as it should. :victory:
Now I'm trying to solder a new power button......it's a bit tricky
Again, thank you very much guys!
I had the same problem, pressed the button many times, and it helped. Thank you for your suggestions
How the problem occurred
So a year or two ago I bought a Jiayu G4A/T/Whatever they're calling it and safely got it here. I've used the stock ROM for a bit but I wanted to get rid of the bloatware that was still on it, so I eventually ended up with a properly rooted phone with a ROM from Jiayu.es (Everything worked, have ClockworkMod as recovery, accessible via Mobileuncle Tools), which was essentially a stock Kitkat rom made to work for the phone. Now I got sick of the ROM and recently saw the new EMUI version on Huawei's P8 Lite, so I figured I'd look around for a tailored ROM running that, and ended up at "jiayu-emui-3-0-stable" from Needrom.
What I did
1. I downloaded a ROM from Needrom with identifier "jiayu-emui-3-0-stable" (I can't post external links)
2. Backed up my important files following a guide from androidcentral titled "[Guide] How to Backup and Restore Apps and Data when installing new ROMs" that I can't link,and did a full backup using CWM
3. Placed the ZIP on my internal SD card, went into recovery, wiped data/cache (not dalvik, since it wasn't described in the instructions, I think this might be a probable cause) and installed the new ROM from ZIP
4. Rebooted the phone and now it's stuck in the boot loop I mentioned.
What the problem is
Bootloops aren't that much of a problem usually, except this one is... I can't get into recovery mode. From there on it'd be cake, since I made the right preparations, but I can't get into it. While connected to my PC it keeps powering on, showing a splash screen from Jiayu.es briefly (which shouldn't be present anymore) and powering off after 10 seconds, only to come back to the splash screen.
What I've tried
I've unplugged it, removed the battery, waited to get a full power cycle and tried to hold my buttons in these combinations: [power button + volume up], [power button + volume down] - but neither work. It just keeps going with the boot loop. I can succesfully power it down, and when I plug it in from there it shows the low battery image. At the moment of seeing that I thought I could connect to it using ADB / Fastboot, but no luck there either. It keeps saying no devices found, and with fastboot it keeps on <waiting for device>.
My questions
What exactly can I do if there is no way for me to get into recovery mode? Are there any alternatives? How can I get my device to be recognized by ADB? Is that even possible? Why is this bootloop any different from others?
Update from the massive Q&A thread:
ZipAddict said:
Is it booting up on its own too after being off? This happened to wifes phone and it turned out the power button was stuck. I took a pencil and hit the power button with the eraser a few times and it worked then. Her case mustve dislogded it. I will keep my fingers crossed for u. If not send me a private message and i will look for an answer tomorrow and get back with u
Click to expand...
Click to collapse
Thank you for the reply!
Yes, it does. I took the battery out and let it lay disassembled for a night, after which I cleaned it a little and re-inserted the battery. With the case back on, nothing happened, so the power button wasn't stuck for sure. When I powered it back on with the power button (no USB attached) it showed the emblem for ~8 seconds and powered off. It then buzzes to show it's powered on again and up comes the splash screen again. Could it be that the ROM was just a rebooting falsehood? Why would it disallow me getting into recovery mode? I really hope there is something that can still force the device into recovery mode / interact with it somehow while in this state.
Oh, I also tried to see if the volume down button was broken but all the contacts seem intact, plus, they worked an hour before I started switching roms.
I've seen a few other similar threads, so apologies if you think I didn't search. But all those other threads appear to be with a rooted phone. This phone was not rooted or modified in any way. It was fully stock from T-mobile.
It belongs to my 12 year old daughter. She is not technically savvy, so I believe her when she tells me she wasn't trying to root it ("What's rooting?" she said). Here's what she said happened:
She was at a friend's house. Used the phone until the battery died, no abnormal behavior by her or the phone before the juice ran out. Went to plug it in, the greyed out battery with a loading indicator came on the screen as soon as she plugged it in, and a few seconds later, the LG boot logo appeared. It showed for approximately 10 seconds, went to black, and then started the LG boot logo again. It's been in that boot loop every since.
We have to pull the battery to turn it off. The battery and SIM card have been pulled for hours at a time. I tried the hardware keys to get to stock recovery (volume down + pwr. Wait for boot logo, release and press power while still holding volume down). Recovery will launch, but as soon as I choose the restore option, it goes back into the boot loop.
Tried the many-times-posted sequence to flash stock recovery. When I hold volume up and insert the USB, the initial screen for download mode shows up, stating to keep holding volume up until you see the download screen. After about 5 seconds or so, it starts the boot loop all over again.
Only thing out of the ordinary was applying a recently pushed update from T-Mobile.
Here's a link to a video showing the loop, the recovery mode, and download mode: https://youtu.be/eRmXqFoz5iY
Even though the phone is under warranty, T-Mobile wants $20+shipping to replace it. I'd like to try to fix it before I pay them for breaking my daughter's phone. Any help is greatly appreciated.
I have Lenovo TAB S8-50F that is currently stuck in a boot loop. It shows the white Lenovo and "android" text on black background boot screen for 30 to 60 seconds, then shuts off, vibrates and the screen flickers some white color and then goes back into the Lenovo and "android" text boot screen and repeats.
After some investigation on these forums and Google, I have tried the following:
Hold down Power + Volume Up + Volume Down until I see "fastboot starting...". I wait 5 - 10 minutes and it still says "fastboot starting...", nothing else. I try to connect to my Windows 8 laptop but it doesn't recognize the device.
Hold down Power + Volume Down until I see the boot screen, then let go of Power (keeping Volume Down pressed). Apparently this should boot into a Recovery menu, but nothing happens and it continues to just turn off after about a minute and boot loop
Hold down Power + Volume Up until I see the boot screen, then let go of Power (keeping Volume Up pressed). Same result as above, it still goes into boot loop.
During any of the 3 scenarios above, I can turn off the tablet by holding Power + Volume Up. Also I never saw any other messages like "EFI failed" or "No mounted drive" that other users had problems with.
Is there anyone out there that can help me restore this tablet back to functional state? I'm not sure what happened that caused this to happen.
bump
bump
bump
Your question has been answered on my thread
drop a like on all my past comments to encourage me to help you.
TAP ON THE BOX BELOW TO CONTINUE
x.ak**** said:
like all my comments above to encourage me to help you.
Okay so first of all i will let you know why a phone gets bricked-
>corrupted rom
>some system files got deleted
>rooting
>modding
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
my case
i always keep two phones with me like one for my experiments and one as a backup. In this case i'll be talking about my lyf wind 3 that got bricked.
>actually i was trying to install twrp onto that phone but first i had to root it, and due to the upgraded android security, i wasn't able to do via kingoroot so i tried i-root and it did the job but instead of kingo-superuser i got some ****ty superuser so i tried granting permission to the actual superuser and while doing so i accidentally double rooted my phone (first with i-root and then with kingoroot), which was kinda stupid, so it just deleted some system files and my phone wouldn't boot after that. It just got stuck on the boot logo.
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Click to expand...
Click to collapse