Related
I feel like I need to 1st explain that although I don't post here often I'm not an absolute noob. I load a new ROM about every 30 days and used Tierman before advancing to Sashimi. Ever since the 6.5 roms dropped I've been unable to see my Titan from ANY laptop/desktop. I'm looking for others with the same issue and/or if this is a known issue that has been resolved.
Tried RyanMogul6800 2.2 Heavy
Tried JUSTPCTECH 6.5 Rom
Tried an un-named 6.5 Rom prior to the 21501 release
Same issue on all of these roms, SSID/PPC not visible
Device is a 6800 Alltel branded on the Alltel network
WMWifirouter version is 1.35
Tried deleting the wifi listing on the pc's/laptops
Tried re-installing WmWifirouter
Tried rebooting everything
Tried changing hardware switch to control ringer on/off instead of wifi
Tried manually powering on wifi via Comm Manager
I know wmwifirouter started out testing here so I hope they see this post but I will be accessing my paid support with wmwifirouter to submit a support ticket.
Has anyone else experienced this?
What did you do to fix it?
Try going into settings, connections, Wireless LAN, change power mode to best performance. Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect. Now turn on wifi switch and go back into wifi settings. Pick to see ad hoc only and create new. Make a name and make it an ad hoc connection, pick open connection no security protection. Finish. Now using wifi on a laptop/desktop refresh the wifi and you should now see your connection. Quick tip when using WmWifirouter. Make sure nothing is connected to your PPC's adhoc connection. Have the wifi switch enabled BEFORE turning on WMwifirouter, Once its connected you can then use a desktop or laptop and connect to the PPC, and dont turn the WIFI OFF until you have quit WMwifirouter. I use the network plugin to access shared folders on my PC to transfer music etc.. Also make sure the wifi on the PC is not set up to share its own connection. That will interfere with the networking with the wifi on the PPC. Let me know if you get wi-fi working.
Thanks and I'm trying that now..only thing is I've been using WMWifirouter cince before it was 1.0 and it always worked fine. While i'm trying your suggestion is their anything different with 6.5 that would have me manually connecting.
I'm used to setting up wmwifirouter in the office and letting 2 otherppl access it and just GO! This happens on Vista, XP, and Windows 7 (I'm an MSDN subscriber). Anyhow trying your suggestions and let me know about 6.5 if you goet a sec.
Thanks
Tried it and my network showed up for a sec but when I tried connecting it timed out and then never showed up again. USB to 3G works fine and I tried ur suggestion on Vista & XP. Still pokin away. Hope sumthin works out!
Just a side note. My wifi IP on the 6800 is always all 0's 0.0.0.0 Shouldn't it be 192.16.3.1 and DHCP is enabled BTW
I'm experiencing a similar problem and have tried several 6.5 builds, including my own from the ppckitchen. WIFI will work for some time and then stop. It will work again for a short time after rebooting but then will stop once more.
So after JustPCTechs (I prefer Ryans Rom) rom i am back on RyanMogul's heavy & it's still not working. I like many people looked at others with this issue like it's something they are doing wrong but I am an EVERY DAY user of wmwifirouter. I cancelled my itnernet at the house simply because Alltel's unlimited was so fast. I even had the kid's Xbox 360 running through it.
So I'm still stuck with no wifi for wmwifirouter. Even after Ryan's suggestions. I know other people have this problem. I just wish you guys would speak up so we can collect data on this issue and resolve it for real.
No disrespect to the very talented individuals whom have assisted me so far. You and your work are greatly appreciated.
I'm also verifying the problem exists. Also I cannot connect my home pc's internet through the USB cable to the phone anymore. I have verified this same problem with all 3 of the 6.5 roms I've tested. I tried ryan's suggestion but to no avail. Looks great though!!
For the issue of the PPC not being able to use your PC's internet through USB cable you may want to try going into settings/connections/connection settings/select network. Make the top drop down menu My work network and the bottom drop down menu make your Carrier ex:Cricket, MetroPCS, etc.. That way should use your WAP when unplugged and use the PC's home connection when plugged in. That would then be normal operation.
SOLVED:
So I was poking around in the 6800 and I never use wifi because Alltel is SOOO fast. I saw a saved network connection ON THE 6800 to wmwifirouter. I thought it was odd since I asked wmwifirouter to dynamically create the network each time instead of storing it.
After doing that I was able to consistently see the 6800 from any device.
So Comm Manager / wireless Lan/ delete wmwifirouter
I've had the usb issue a long time ago and it is not the same.
RyanMogul6800 said:
Then go into settings, connections, wifi and if any connections are in there delete them. Make sure no connections are attempting to connect.
Click to expand...
Click to collapse
If you notice i already said to delete existing wi-fi connections. So my first responses were your solution. you just overlooked it.. take care glad your sorted out.
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
ebonygirl said:
I guess I did and let me make this real clear for anyone reading this later on. Wmwifirouter creates a wifi connection ON YOUR PPC DEVICE - TO YOUR PC DEVICE.
So when people tell you to delete all wifi connections and you delete the one on your laptop/desktop don't forget (like i did) to delete it on the ppc as well. I never knew thats how wmwifirouter worked. Learn somethin new every day. Thanks to all that helped.
Click to expand...
Click to collapse
In my instructions it is telling you to delete the connections off of the PPC.. Any connection on your PC would not automatically connect unless u had a matching ad hoc connection on ur PPC. I provided the fix and u overlooked/misunderstood it. I am glad you got ur wifi back up and running.
Hi everybody. Now that I have rooted my mini I could install Barnacle wifi tethering for connecting to my laptop. But after long trials I am still not able to connect my phone with my laptop.
Can anybody with prior experience help me in this regard
For wired tethering I use Easytether which works great.
I havent tryed yet, but try setting the WLAN interface to "tiwlan0" and/or try skipping wpa_supplicant
Regards
Bin4ry
Bin4ry said:
I havent tryed yet, but try setting the WLAN interface to "tiwlan0" and/or try skipping wpa_supplicant
Regards
Bin4ry
Click to expand...
Click to collapse
Wonderful. It is connected with your suggestions. Many thanks.
Partha
Thanks, I also got this to work. What I wonder now is if it is possible to have security for this tether. When we choose skip wpa_supplicant then the security is disabled and it is an open network. When traveling and visiting public places I would be somewhat uncomfortable to have this open network. Barnacle does provide the WEP security option, but in order for this app to work with the x10 mini we need to choose skip wpa_supplicant which opens up the network to all. Any ideas?
I had to change WAN-setting & disable security too to even find the WiFi network.
However, when I connect it doesn't work. I see the in Barnacle "traffic"-pane that my computer sends requests when I try to load a webpage in the browser. But the down-traffic won't increase. Anyone know the next step in troubleshooting?
i left all the settings stock except turned on skip wpa supplicant. mine works great i ran ping- t all night and only lost 15 packs 0% loss, which is less loss than my friends cable internet.
when i first got it working i was using a mix of settings and i had to hit associate every 5 min or my laptop would stop having access to the internet but still remain connected to the network. so i just reinstalled it and it works great now.
This feature is one of the main reason why i bought an android device.
Edit:
after a few more days of pissing about with barnacle i realized that it cuts out when ever the phone is not being charged and falls a sleep and as long as i keep the phone awake its fine. the solution i came to was to open music player and play a song with the volume off and that keeps the phone from going into sleep mode. i know there's supposed to be a setting to stop wifi from turning off while in sleep but i have a branded rom and it doesn't appear i have the option. hope this helps someone.
There are two versions out there, 0.4.2 and 0.5.0. What version do you guys run?
anyone share the settings for barnacle wifi tethering. Its not working in my rooted x10 mini.
nate340 said:
i left all the settings stock except turned on skip wpa supplicant. mine works great i ran ping- t all night and only lost 15 packs 0% loss, which is less loss than my friends cable internet.
when i first got it working i was using a mix of settings and i had to hit associate every 5 min or my laptop would stop having access to the internet but still remain connected to the network. so i just reinstalled it and it works great now.
This feature is one of the main reason why i bought an android device.
Edit:
after a few more days of pissing about with barnacle i realized that it cuts out when ever the phone is not being charged and falls a sleep and as long as i keep the phone awake its fine. the solution i came to was to open music player and play a song with the volume off and that keeps the phone from going into sleep mode. i know there's supposed to be a setting to stop wifi from turning off while in sleep but i have a branded rom and it doesn't appear i have the option. hope this helps someone.
Click to expand...
Click to collapse
You can disable wifi sleeping on Settings -> Wireless controls -> Wi-fi settings. Push menu button and choose 'Advance'
Sent from my U20i using XDA App
nuire said:
I had to change WAN-setting & disable security too to even find the WiFi network.
However, when I connect it doesn't work. I see the in Barnacle "traffic"-pane that my computer sends requests when I try to load a webpage in the browser. But the down-traffic won't increase. Anyone know the next step in troubleshooting?
Click to expand...
Click to collapse
I have the exact same problem and have tried everything listed here Anyone find a solution??
It works for me now using Barnacle Wifi Tether 0.6.7 and a SE X10 mini 2.1. Had the same problem before. Now my settings are:
Wireless Encryption: Wep Enabled (with hex password code)
Channel: 6
"Skip wpa_supplicant" - unchecked
Wan: tiwlan0
Hi all.
BarnacleWifi worked fine for two weeks but until I setup new android vertion 2.1.1.A.0.6 he doesn't.
Anyone try it with this one ?
Regards,
Devilo.
Edit: I can see the network on windows7 but when I try to connect, it freeze on "Identification" and I never have ip adress
DHCP doesn't work.
Same here :-(.
It finaly works on my mini with 2.1.1.A.0.6 firmware.
On MiniCM-1.0.0-Alpha2, Froyo Cyanogen 6.1 port for the mini "Rom"
Dont forget skip WPA supplicant.
Regards
Devilo.
On X10 mini Barnacle works without skip wpa suplicant! After a few trys and som Observation I found the Problem. Every baconinginterval the adhoc Network have a other MAC. I try to set a fix BSSID in Barnacle but now i can't find the Network so i undo it.
After some Trys i found a workaround:
1. Start Barnacle
2. Press Associate
3. Try to connect with your Computer
4. After entering password, your Computer try to connect, press 1 time again Associate
My Settings are:
WEP Encyrpting: Enabled
Skip wpa_supplicant: Disabled
Auto Associate: Disabled
WAN: rmnet0
still not conneting
It's still not working on my x10mp 2.1.1.A.0.6 firmware. My PC (Debian or Win7 have the same problem) still doesn't connect.
Barnacle on phone is showing no errors. PC is finding the wireless network but can't connect. Looks like it does not get an answer from phone (no IP address assigned).
I surely have tried all the advices from this forum and any google search gave me.
Same problem here guys - this was the reason for rooting my x10 mini
@@
same here..
And I haven't found any solutions yet ... thankful for any suggestions ...
Sent from my U20i using XDA App
Kick for this thread, looking for a solution...
Hey I'm new to android, just got a vibrant last week. Decided to unlock it as I travel a lot. The unlock worked, but now I'm having issues with my wifi. I can connect to a wireless network but I cant load pages. The wireless signal is strong and I tried with different routers, but still no luck. Looked through the forum and googled it but couldn't find a solution. If some one could please help with this, it would be much appreciated
try clearing your current wifi settings including remembered connections, passwords, and everything else...then re-scan for networks all over again, that's all I can think of for now
By that you mean just gong into settings->wireless and networks->wifi settings and then just forget the net work, rescan, and rejoin the network? If so, I did that but am still getting the same result. If you can think of anything else or if I didnt do what you suggested correctly please let me know. Thanks
srah said:
By that you mean just gong into settings->wireless and networks->wifi settings and then just forget the net work, rescan, and rejoin the network? If so, I did that but am still getting the same result. If you can think of anything else or if I didnt do what you suggested correctly please let me know. Thanks
Click to expand...
Click to collapse
yeah, thats what I meant :/....hmmm...sounds like your connection is working, can you download stuff from the market or is it just the browser? cause I unlocked mine too and wifi works fine
No I cant download anything from the market. I cant do anything that requires an internet connection, but it does show that I am connected to a network.
srah said:
No I cant download anything from the market. I cant do anything that requires an internet connection, but it does show that I am connected to a network.
Click to expand...
Click to collapse
hmmm...im out of tips then ...perhaps some other members can be of more assistance
I sure hope so, thanks for your help
Have you been able to try another network? My first thought was it was in Ad-Hoc mode but I could be wrong. If nothing else restore to stock firmware and then try a different unlock.
Happened to me too. It would show the wifi icon on the notification bar but wouldn't load pages. I'd go to the settings and it'd say can't turn off wifi or can't turn on wifi. And when it was "on" I'd say connecting to modem then it'd just stop. When I was using the browser on wifi it would load a page even when I had full bars. I had to turn it off then back on to load another page. Is this similar to the problem your having?
Sent from my SGH-T959 using XDA App
I hope this doesn't sound stupid but yesterday I uninstalled Advanced Task Manager and poof my wifi started working again. The phone also seems to suffer from less occasional lag without it installed, but that's another story for another thread. Prior to this I had to manually turn my wifi connection off and on, but even that didn't always work. Since the uninstall I have not my wifi connection once. I am currently using the stock rom, rooted with minor adjustments here and there.
hi guys, i also have this problem.
i will be taking the phone in to the tmobile store on thursday.
it shows that i am connected via wifi; however, anything that requires an internet connection does not load.
very frustrating, since just yesterday i used the samsung kies software to tether a network for my laptop. i was testing the capability of the vibrant to act as a modem, and it worked just fine.
any help would be appreciated!
thank you
Charlie
connected but not connected
I also have this problem.
In my Vibrant shows that i connected, but i can not load pages. Someone
found any solution to this problem?
Hi all,
This is happening to me too. Rebooting seems to get Wifi working correctly again. But the problem comes back eventually.
Maybe a bug in the latest JI6 update?
Wi-fi problem.
Someone found any solution for this problem?
Froyo's update will fix this issue?
Thanks.
i hang on you **** iphone users they just bay for its cool smartphone **** iphone android is the king
So judging by the quick search, many people have this problem on many different phones, and no solution was found.
I know I've had this problem with my old SGS 1, and even Nexus One.
Same problem on my SGS II, tethering to many different desktops and laptops.
So it seems to be android-specific, or Windows specific problem, really.
Basically, when you tether with USB, first several minutes all is well and speed is good, but in about 5-10 minutes, traffic from the phone just stops.
Phone still shows tethering ON, PC still thinks it's connected, but nothing loads, it doesn't disconnect, it just drops to speed or 0 kbps.
The only way to restore it is to disable tether and reconnect.
Anybody has any idea why would this occur and how to prevent it?
Does it say no internet connection on the network indicator on the bottom right of the notification center? My guess is your carrier has an issue with tethering. I see your on AT&T. Do they have a plan that is specifically for tethering?
Braidonh said:
Does it say no internet connection on the network indicator on the bottom right of the notification center? My guess is your carrier has an issue with tethering. I see your on AT&T. Do they have a plan that is specifically for tethering?
Click to expand...
Click to collapse
No internet connectivity loss is indicated in windows, it still thinks it has a good internet connection. I'm assuming that after a while, it will detect that although there's a connection, there's no actual traffic flowing through it, and will say that there's an issue... but for a long time, it's simply as if I'm connected, but actual speed is at 0kbps.
Browser tries to load pages and times out in 10-30 seconds.
Unfortunately (or fortunately) this definitely doesn't have anything to do with AT&T. I have unlimited grandfathered plan with AT&T and a custom rom, AT&T has no idea that I'm tethering. Internet on the phone is still working fine.
I kinda feels as if the usb tether drivers in windows (RDIS or whatever it's called) simply gives up after a while. Or maybe it's the android tether process that "forgets" what it's supposed to be doing.
you are running a stock ROM right?
RorixRebel said:
you are running a stock ROM right?
Click to expand...
Click to collapse
Nope, latest CheckROM.
But as I've said, I had same problem with Captivate and other ROMs on SGS2 =(
i haven't found a custom rom where tethering fully works....thats why i went back to stock
Have the same problem on BOTH my Huawei ideos U8150 and my HTC sensation.
My wirelessly tethered devices still work flawlessly but my USB tethered desktop disconnects after a few minutes. Screen time out set to Max in case something in the phone went to sleep but no difference. Definitely not a network problem as my operator confirmed but an android (or windows problem) .
I even set USB Port power settings to always stay awake.
Hope we can find a solution to this.
Sent from my HTC Sensation Z710e
i got the same problem under ICS. tried on stock ZSLPE and custom XXLPQ firmwares. both do not work!
my stock gingerbread was able to work flawlessly without disconnection problem on the same pc. wtf is happening?!
I have Samsung Galaxy S Plus.
I am facing exactly the same problem.
Have tried different ROM's around 5, 3 were custom ROM's.
Looks like Android OS issue.
abhijit_net said:
I have Samsung Galaxy S Plus.
I am facing exactly the same problem.
Have tried different ROM's around 5, 3 were custom ROM's.
Looks like Android OS issue.
Click to expand...
Click to collapse
I had this problem on both my Samsung Charge(Stock app 2.3.6), and my Motorola Razr(Stock app 4.0.4). I believe it is a driver issue inside windows. It seems less of a problem on the Motorola phone as I get a few hours of USB tether before it exhibits the same problem whereas the charge started after a couple of minutes. ie. Phone has data and can access web, computer thinks its connected to the web and okay, but any attempts to connect to the internet from the pc fails.
The wireless tether works fine and does not exhibit the same issues so I would suggest you use wifi tether. I don't know if wifi tether uses more or less power than usb tether (assuming your phone is connected to computer and charging). If I get some more free time in the next few weeks I might try and do an analysis.
listlessloki said:
I had this problem on both my Samsung Charge(Stock app 2.3.6), and my Motorola Razr(Stock app 4.0.4). I believe it is a driver issue inside windows. It seems less of a problem on the Motorola phone as I get a few hours of USB tether before it exhibits the same problem whereas the charge started after a couple of minutes. ie. Phone has data and can access web, computer thinks its connected to the web and okay, but any attempts to connect to the internet from the pc fails.
The wireless tether works fine and does not exhibit the same issues so I would suggest you use wifi tether. I don't know if wifi tether uses more or less power than usb tether (assuming your phone is connected to computer and charging). If I get some more free time in the next few weeks I might try and do an analysis.
Click to expand...
Click to collapse
I've had this problems with pretty much every Samsung phone I had.
I have HTC One X now, and it doesn't have this problem. So something with Samsung drivers, I think.
Cool fact - HTC even has a one-click reverse tethering. So cool.
I have the same problem, but can't find out, where (windows or android) is it.
What I have:
Motorola Atrix (rooted with SuperOneClick, stock ROM)
PC with Windows XP x64 without WIFI
The only RNDIS drivers I could find was HTC RNDIS (for XPx64)
Situation:
I'm living in hostel for one month, and there is only WIFI internet here, so I tried to get my phone WIFI to tether into USB
What have I done:
Connected to WIFI over phone.
Turned USB tethering ON.
By default WIFI is not tethered to USB, so I found that turning USB tethering ON creates usb1 network and WIFI is eth0. Then I configured NAT by iptables on my phone to accept and forward connection from PC (usb1) to WIFI (eth0). [usb0 on Atrix is for Motorola Portal, didn't try yet to connect to internet throught portal connection, not USB tethering]
The problem in short:
At the begining everything works fine. But when many connection threads are opened (didn't look for that many count) connection stops. As it was already mensioned, PC thinks it is connected, on phone USB tethering is still ON, even more - ifconfig still shows the connection. The only diffrenece is that "ping 192.168.42.129 -t" on PC (192.168.42.129 is usb1 IP on phone) starts showing "Request timed out" messages. On the other side - from my phone, I cannot ping my PC either. So connection is like broken, no traffic can be passed, but both sides sees they are ON.
After turning off USB tethering, PC sees connection is off immediately and the Local Area Connection #23 is gone. After turning on USB tethering everything comes back to the beginning.
Current workaround (for me):
I am using VPS service, so I open dynamic SSH tunnel over putty, and use it as my SOCKS5 proxy. The worst thing is that not all programs can use proxies, and when I use such program it tries to crash my connection.
Sorry for my english, it is foreign language for me, if anything is not understandable or you need more test from me, please ask, I will try to do my best.
Power Tether Off
DarkDvr said:
So judging by the quick search, many people have this problem on many different phones, and no solution was found.
I know I've had this problem with my old SGS 1, and even Nexus One.
Same problem on my SGS II, tethering to many different desktops and laptops.
So it seems to be android-specific, or Windows specific problem, really.
Basically, when you tether with USB, first several minutes all is well and speed is good, but in about 5-10 minutes, traffic from the phone just stops.
Phone still shows tethering ON, PC still thinks it's connected, but nothing loads, it doesn't disconnect, it just drops to speed or 0 kbps.
The only way to restore it is to disable tether and reconnect.
Anybody has any idea why would this occur and how to prevent it?
Click to expand...
Click to collapse
Hi,
I had the same problem with my Android Phone - P999 running Cyanogenmod 7.2
I had to go into usb debugging screen to adjust the Display power Settings to - Always ON when Charging - Option.
There is probably some power setting in your device that allows you to do that as well.
Basically Power Saving (Screen Off) Powers OFF the Tether.
Ensuring the Screen is ON while Charging (it charges while plugged into a usb port) ensures the Tether stays ON ALL the TIME!
Hope this helps you.
Took me quite awhile of messing around to find the right option.
I do have a similar problem but it's not time-dependant.
Phone:
Nexus 4 mako
AOKP JB-MR1 Build 6
franco kernel 3.4.0 build #121
Situation:
I use FolderSync to backup my sdcard to my Windows 7 FTP server. The reason for doing this over USB Tether is that I get speeds at around 14MB/s instead of 1,2MB/s over WiFi.
I noticed that it doesn't really matter how long tether is connected and nothing really happens as long as FolderSync is scanning the folders on the ftp server at low bandwidth. However once a larger file is transferred the connection is almost sure to break and show the symptoms described by the other posters (interface still up, just no packets being received at either end).
So I assume that some driver (either on Android or Windows) chokes on certain packets and then just dies. Anyone got an Idea how to tell which device causes the problem to investigate further?
I also noticed that if I had ADB enabled before starting USB Tether that the tether connection on the android will be disabled once the failure occurs.
I have problem with my realme c2 when i connect it to pc via usb tethering, it connects it running ok. if i make screen on by playing youtube or any video on it run but as soon as screen sleep it disconnect after some time
I'm a bit late to this, but for anyone else still having this problem:
in Developer options of my phone(Redmi note 11) under Networking, there is an option called "Always keep mobile data on". Turning this on should fix the issue
@Denav
This doesn't work for me. I have a Moto G Power 2021 and that option is already checked.
flyingpreacher said:
@Denav
This doesn't work for me. I have a Moto G Power 2021 and that option is already checked.
Click to expand...
Click to collapse
Were you able to figure out the issue? I'm having trouble as well. Mine disconnects after a certain time period and the times seems to be random. I've played around with the dev options and other cables and still having same issue. It seems to happen with mac and windows laptops.
I have a netbook with Windows 7 x64 on it, and I started Virtual hotspot service on it, I did all this to share internet for my Galaxy S II, of course. I use static IP on both devices for the success of the connection.
And I did everything to make it work, and actually it works.
BUT it behaves very oddly. I start the Virtual hotspot, the phone finds it in moments and connects to it, with no problem. Tha signal is strong.
After a while - sometimes after a few second, sometimes after an hour - the connection totally disappears from the phone, it does not appear in the list of connections anymore... But on the netbook nothing odd happens, I mean, nothing by look, no error/warning message, nothing.
IF I restart the phone, nothing happens, I can't se connection anymore!
The ONLY thing what works this time it disable the virtual hotspot functions COMPLETELY, and re-enable it, this way the phone sees it again, and connects as normal.
With every other hotspot I don't have this problem with the SGS2.
This way it is obvious the problem is related to my netbook. So maybe it's the wrong post in the wrong place, I just hope someone experienced the same, and maybe have a solution, idea.
Every advice would be appreciated!
I have the exact same problem using a software called maryfi. Can't figure it out.
Sent from my GT-I9100 using xda premium
I don't use software, I use only commands in command promt, because actually it's a built-in feature in Win 7.
Anyone?