Hi,
When i woke up this morning my phone was attempting to boot, but was stuck on my boot animation. So i pulled out the battery and rebooted, since then it has been turning on for a couple mins than rebooting the phone its self is slightly warmer than usual, but it has been hotter before. I have attempted to back up my data using cwm, but the reboot still happens, im unsure if its on the same file that causes the reboot. Im trying to back it up to completely wipe it and see if that makes a difference.
I would be grateful for any help in the matter.
ads2996 said:
Hi,
When i woke up this morning my phone was attempting to boot, but was stuck on my boot animation. So i pulled out the battery and rebooted, since then it has been turning on for a couple mins than rebooting the phone its self is slightly warmer than usual, but it has been hotter before. I have attempted to back up my data using cwm, but the reboot still happens, im unsure if its on the same file that causes the reboot. Im trying to back it up to completely wipe it and see if that makes a difference.
I would be grateful for any help in the matter.
Click to expand...
Click to collapse
Hi,
i would boot into CWM or TWRP and then i would do a wipe cache / dalvik, and flash your "rom.zip" from internal or external sd card. If that does not work then do a factory reset and flash "rom.zip". If the problem still exists what i do not hope for you, then you have to wipe all your data without doing a nandroid backup and then flashing again. Do you have a stock rom installed or what rom do you have and what kind of kernel?
But try to flash your rom and kernel again . Hope it will help your "Diva" ?!
Sounds to me ur power button is stuck.
Sent from my GT-I9300 using xda app-developers app
DrEVILone81 said:
Hi,
i would boot into CWM or TWRP and then i would do a wipe cache / dalvik, and flash your "rom.zip" from internal or external sd card. If that does not work then do a factory reset and flash "rom.zip". If the problem still exists what i do not hope for you, then you have to wipe all your data without doing a nandroid backup and then flashing again. Do you have a stock rom installed or what rom do you have and what kind of kernel?
But try to flash your rom and kernel again . Hope it will help your "Diva" ?!
Click to expand...
Click to collapse
im running the stock rom with siyah kernal and jkay framework.Well i wiped the /data and it seemed to work then i did the foolish thinng of trying to flash a /system backup i had. So m back to where i started. I'm downloading the latest stock rom for my network and am gonna try and flash via odin. Hopefully that fixes it.
When falshing with odin does it wipe /sdcard?
JellyYogurt said:
Sounds to me ur power button is stuck.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
When ever i do get booted into my phone i am still able to use my power button as normal. And the power options box odesnt appear before it reboots either.
JellyYogurt said:
Sounds to me ur power button is stuck.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
This could be the easiest solution.....:laugh::good:
But i love flashing and so it was my proposal:angel:
DrEVILone81 said:
This could be the easiest solution.....:laugh::good:
But i love flashing and so it was my proposal:angel:
Click to expand...
Click to collapse
I take it the only way to fix a stuck power button is by taking it apart?
ads2996 said:
im running the stock rom with siyah kernal and jkay framework.Well i wiped the /data and it seemed to work then i did the foolish thinng of trying to flash a /system backup i had. So m back to where i started. I'm downloading the latest stock rom for my network and am gonna try and flash via odin. Hopefully that fixes it.
When falshing with odin does it wipe /sdcard?
Click to expand...
Click to collapse
No i meant you should flash your rom.zip, but when you have istalled a stock rom then you dont have a zip file of it on your sd-card, which you can flash. But a normal odin flash of your stock will solve your problem, and then you can do a custom nandroid backup in CWM (EFS, DATA partition etc). I hope odin will do a complete delete of your /system, /data/media, /data partition. But try it
DrEVILone81 said:
No i meant you should flash your rom.zip, but when you have istalled a stock rom then you dont have a zip file of it on your sd-card, which you can flash. But a normal odin flash of your stock will solve your problem, and then you can do a custom nandroid backup in CWM (EFS, DATA partition etc). I hope odin will do a complete delete of your /system, /data/media, /data partition. But try it
Click to expand...
Click to collapse
I jhave managed to restore /system and /boot so can now enter my phone after being stock reset. When i try to format /data through cwm it reboots and when i open appalications manger it also crashes it is filled with apps that arent installed on the phone
Wait a moment man.....sounds not pretty good...but we can manage it
---------- Post added at 07:00 PM ---------- Previous post was at 06:49 PM ----------
We should do a full wipe of your phone.....:laugh:
1. Load a rom xyz.zip file on your external sd card (i would recommend not a stock rom)
2. Reboot into CWM (what version do you have ??? etc. It is very important for your new rom what you want to install instep 6)
3. Do a full wipe (wipe cache / wipe dalvik cache)
4. Factory Reset
5. Delete /data and /data/media i mean everything (so your internal sd card has to be empty and empty)
6. Install zip file from sdcard1 (external sd card)
so a new rom will be flashed dont forget it, its your phone
7. REBOOT
8. Now you have a newly fresh installed ROM on your S3 :good::laugh:
All your data is lost.....but your phone works
---------- Post added at 07:23 PM ---------- Previous post was at 07:00 PM ----------
When you flashed with odin?! Havent you?! Then these are the apps of the bloated stock-firmware......
DrEVILone81 said:
Wait a moment man.....sounds not pretty good...but we can manage it
---------- Post added at 07:00 PM ---------- Previous post was at 06:49 PM ----------
We should do a full wipe of your phone.....:laugh:
1. Load a rom xyz.zip file on your external sd card (i would recommend not a stock rom)
2. Reboot into CWM (what version do you have ??? etc. It is very important for your new rom what you want to install instep 6)
3. Do a full wipe (wipe cache / wipe dalvik cache)
4. Factory Reset
5. Delete /data and /data/media i mean everything (so your internal sd card has to be empty and empty)
6. Install zip file from sdcard1 (external sd card)
so a new rom will be flashed dont forget it, its your phone
7. REBOOT
8. Now you have a newly fresh installed ROM on your S3 :good::laugh:
All your data is lost.....but your phone works
---------- Post added at 07:23 PM ---------- Previous post was at 07:00 PM ----------
When you flashed with odin?! Havent you?! Then these are the apps of the bloated stock-firmware......
Click to expand...
Click to collapse
I'm just back from hockey and have managed to restore the phone to what i had before. So im on 4.1.2 and the random apps have disappeared, and the internal sd card has been wiped so lost a few fb photos nothing serious, well that i can remember.
I am either goign to go with the latest firmware from my carrier which is 4.3 or a newer rom, i would really like to try dual booting android and ubuntu. Any suggestions?
FLASH and TRY
ads2996 said:
I'm just back from hockey and have managed to restore the phone to what i had before. So im on 4.1.2 and the random apps have disappeared, and the internal sd card has been wiped so lost a few fb photos nothing serious, well that i can remember.
I am either goign to go with the latest firmware from my carrier which is 4.3 or a newer rom, i would really like to try dual booting android and ubuntu. Any suggestions?
Click to expand...
Click to collapse
I am happy about that your S3 is working well, its one of the best devices and xda support for our device is nice.....
I use fusion kitkat rom with the stable boeffla kernel in it......YOU must try it. I appreciate it:good:
There are two dualboot kernel for our devices: googymax2 (development of siyah kernel and devil2.....i tried both
naturally with dualboot installed. but im also waiting for a stable version of ubuntu touch and then ........:crying::laugh: there is
also a thread here or you must "google" man you will find sth. But in my opinion try sth different from the stock-rom......OUR XDA-DEVELOPERS
are GREAT......CM11, SLIM or sth like that.......try
---------- Post added at 10:08 PM ---------- Previous post was at 09:51 PM ----------
DrEVILone81 said:
I am happy about that your S3 is working well, its one of the best devices and xda support for our device is nice.....
I use fusion kitkat rom with the stable boeffla kernel in it......YOU must try it. I appreciate it:good:
There are two dualboot kernel for our devices: googymax2 (development of siyah kernel and devil2.....i tried both
naturally with dualboot installed. but im also waiting for a stable version of ubuntu touch and then ........:crying::laugh: there is
also a thread here or you must "google" man you will find sth. But in my opinion try sth different from the stock-rom......OUR XDA-DEVELOPERS
are GREAT......CM11, SLIM or sth like that.......try
Click to expand...
Click to collapse
Ithink the development of ubuntu touch is discontinued. Its a thread also.....
But running ubuntu on your device is possible as an arm version...... linux deploy apk.....and then you can have a look on whats
possible. But its not a real dualboot..... It runs from your external / internal sd card...
DrEVILone81 said:
I am happy about that your S3 is working well, its one of the best devices and xda support for our device is nice.....
I use fusion kitkat rom with the stable boeffla kernel in it......YOU must try it. I appreciate it:good:
There are two dualboot kernel for our devices: googymax2 (development of siyah kernel and devil2.....i tried both
naturally with dualboot installed. but im also waiting for a stable version of ubuntu touch and then ........:crying::laugh: there is
also a thread here or you must "google" man you will find sth. But in my opinion try sth different from the stock-rom......OUR XDA-DEVELOPERS
are GREAT......CM11, SLIM or sth like that.......try
---------- Post added at 10:08 PM ---------- Previous post was at 09:51 PM ----------
Ithink the development of ubuntu touch is discontinued. Its a thread also.....
But running ubuntu on your device is possible as an arm version...... linux deploy apk.....and then you can have a look on whats
possible. But its not a real dualboot..... It runs from your external / internal sd card...
Click to expand...
Click to collapse
Thank you very much for all your help in sorting out my phone it is greatly appreicated
ads2996 said:
Thank you very much for all your help in sorting out my phone it is greatly appreicated
Click to expand...
Click to collapse
I dont want to sort out "our" phone.....i ve the same one...... I am not very convinced about the stock roms....but the SIII is great
and is developed in a positive way....in a kind of future development to improve the ram and so on through the kernel.....
ads2996 said:
When ever i do get booted into my phone i am still able to use my power button as normal. And the power options box odesnt appear before it reboots either.
Click to expand...
Click to collapse
It doesnt if the power button is stuck continuously as when u press and hold the power button, it hard reboots so no menu is given. Go google search 'gs3 power button stuck'. Trust me. All of their cases are similar to urs.
Sent from my GT-I9300 using xda app-developers app
Related
I attempted to flash a custom rom and it didn't work. No my phone is stuck on the motorola screen. What do I need to do to get back to stock rom?
Can you please explain simply what did you do? Which rom or which steps did you followed? Just to clarify Things
You cannot flash a custom rom right from start. Did you flash a .sbf by chance?
I attempted to flash CM7 after unlocking and rooting. I have Clockwork mod installed. How do I flash an sbf file? I don't beleive I did that. AM I screwed then?
Ok, can you access to the recovery mode at least?
jhonnyx said:
Ok, can you access to the recovery mode at least?
Click to expand...
Click to collapse
YEs, I can access recovery. Does that mean I can fix this mess?
scottharris4 said:
YEs, I can access recovery. Does that mean I can fix this mess?
Click to expand...
Click to collapse
ok, then...
Wipe Data/Factory Reset
Wipe Cache
Just in case, download another ROM in case zip file is corrupt
Go to Mounts and storage -> mount USB storage
Copy the Custom ROM you've downloaded
Unmount then go back
Install zip from sdcard -> flash the rom you've downloaded
Then reboot and be patient... leave it like 5 minutes or so to see if anything happens.
oh, and one more thing... did the flashing finished with errors?
jhonnyx said:
ok, then...
Wipe Data/Factory Reset
Wipe Cache
Just in case, download another ROM in case zip file is corrupt
Go to Mounts and storage -> mount USB storage
Copy the Custom ROM you've downloaded
Unmount then go back
Install zip from sdcard -> flash the rom you've downloaded
Then reboot and be patient... leave it like 5 minutes or so to see if anything happens.
---------- Post added at 08:56 PM ---------- Previous post was at 08:54 PM ----------
oh, and one more thing... did the flashing finished with errors?
Click to expand...
Click to collapse
If my SD card is already mounted, do I need to mount and unmount? When I go to USB storage, only option I have is unmount, so I should already be mounted. How do I copy the ROM and where do I copy it to?
Flashing CM7 did nt finish with errors
scottharris4 said:
If my SD card is already mounted, do I need to mount and unmount? When I go to USB storage, only option I have is unmount, so I should already be mounted. How do I copy the ROM and where do I copy it to?
Flashing CM7 did nt finish with errors
Click to expand...
Click to collapse
It's ok, when you click on USB storage, it mounts your phone as an USB device ... the unmount option is for unmounting when you finished copying
jhonnyx said:
It's ok, when you click on USB storage, it mounts your phone as an USB device ... the unmount option is for unmounting when you finished copying
Click to expand...
Click to collapse
So that step is just for me to copy the ROM onto the SD card?
also, you might want to take a look to this thread in Return to stock, just in case
http://forum.xda-developers.com/showthread.php?t=1905222
---------- Post added at 09:01 PM ---------- Previous post was at 09:00 PM ----------
scottharris4 said:
So that step is just for me to copy the ROM onto the SD card?
Click to expand...
Click to collapse
Yes, in SD card and/or internal memory
jhonnyx said:
also, you might want to take a look to this thread in Return to stock, just in case
http://forum.xda-developers.com/showthread.php?t=1905222
---------- Post added at 09:01 PM ---------- Previous post was at 09:00 PM ----------
Yes, in SD card and/or internal memory
Click to expand...
Click to collapse
So all I am doing is wiping and reflashing? I have already done that with a different rom. I'm still stuck at the motorola screen.
Did you try restoring the nandroid backup you created after unlocking your bootloader and before flashing CM7?
There is information about getting back to stock on the "answers" post stickied in Q&A.
upndwn4par said:
Did you try restoring the nandroid backup you created after unlocking your bootloader and before flashing CM7?
There is information about getting back to stock on the "answers" post stickied in Q&A.
Click to expand...
Click to collapse
I never could get it to do a backup. So that won't work with getting me back to stock. I'll jsut try to flash one of those fruitcake things. Says its going to take an hour to download. IF that doesn't work, can you help guide me how to flash one in fastboot?
The fact that you couldn't get CWM to do a backup should have told you that recovery wasn't installed properly and you should have stopped there and asked for help. I saw your post over on Th3bill's AOKP thread, and since you saw the AT&T boot animation I'm guessing the ROM never installed.
How did you root and boot?
What happened when you tried to perform a backup?
What happened when you tried to flash the new ROM?
What is the current state of your device? You said you can access recovery, what happens now if you try to boot?
keep us posted pal, good luck!
upndwn4par said:
The fact that you couldn't get CWM to do a backup should have told you that recovery wasn't installed properly and you should have stopped there and asked for help. I saw your post over on Th3bill's AOKP thread, and since you saw the AT&T boot animation I'm guessing the ROM never installed.
How did you root and boot?
What happened when you tried to perform a backup?
What happened when you tried to flash the new ROM?
What is the current state of your device? You said you can access recovery, what happens now if you try to boot?
Click to expand...
Click to collapse
How did I root and boot?
I used automatic unlock. It unlocked and rooted my phone. I verified root access by installing superuser and and root checker. It said I was fully rooted
What happened when you tried to perform a backup?
I can't remember
What happened when you tried to flash the new ROM?
I flashed it, it said it installed successfully or something. I rebooted the phone. It never would go past the at&t loading screen. I pulled out the battery and restarted the phone, wouldn't go past the motorola screen that time. I tried reflashing the ROM and I'm still stuck at the motorola screen.
Oh and when I try to do anything in fastboot via command prompt, it keeps saying < waiting for device > and nothing ever happens.
Still waiting for the stock gingerbread fruitcake to finish downloading.
scottharris4 said:
How did I root and boot?
I used automatic unlock. It unlocked and rooted my phone. I verified root access by installing superuser and and root checker. It said I was fully rooted
What happened when you tried to perform a backup?
I can't remember
What happened when you tried to flash the new ROM?
I flashed it, it said it installed successfully or something. I rebooted the phone. It never would go past the at&t loading screen. I pulled out the battery and restarted the phone, wouldn't go past the motorola screen that time. I tried reflashing the ROM and I'm still stuck at the motorola screen.
Click to expand...
Click to collapse
Did you wipe data, cache, and Dalvik before flashing the ROM? If not do that.
Do you have an adapter to connect your micro SD card to your PC?
upndwn4par said:
Did you wipe data, cache, and Dalvik before flashing the ROM? If not do that.
Do you have an adapter to connect your micro SD card to your PC?
Click to expand...
Click to collapse
Yes, I clicked wipe data/factory reset and wipe cache partition. And yes I do have an adapter.
scottharris4 said:
Yes, I clicked wipe data/factory reset and wipe cache partition. And yes I do have an adapter.
Click to expand...
Click to collapse
Super. Copy the fruitcake to your micro SD then flash that. Which one are you downloading?
hi i have the cyanogenmod 10 build from july 1st 2013.
its installed with the clockwork mod
even put the patch in during clockwork mod
and the google apps during clockwork mod.
the biggest issue im having is that when i click the camera it says no external storage avaiable and to insert an sd card before using the camera.
i cant transfer any pictures to my phone or files.
if i plug the phone into my computer it says turn usb storage on and i try that but cant get into the phones files to fix what i need.
i also can do a mtp mode but it only shows whats on the micro sd card that is it.
i really want to use my phone but this issue is tough to fix.?
what can i do?
What version of cm are you running your title says 10.1 but your post says 10 which one is it? Did you read the op on the Rom. Mainly the what works and what doesn't? Not sure if that's the cm but extsd is broke on one of them I think.
I'm running cm10.1 20130701, unofficial. And my camera works. If this is the cm your on try a full wipe and reflash
I.e. wipe data
Wipe cache
Wipe dalvik
Then reflash
hey
ghost582 said:
Did you read the op on the Rom. Mainly the what works and what doesn't? Not sure if that's the cm but extsd is broke on one of them I think.
I'm running cm10.1 20130701, unofficial. And my camera works. If this is the cm your on try a full wipe and reflash
I.e. wipe data
Wipe cache
Wipe dalvik
Then reflash
Click to expand...
Click to collapse
thanks for your helpful reply but u can provide me the link where u got yours?
what do u mean reflash? i do a boot image, whipe all the data everything, and install from zip.
should i actually go do a boot image again?
http://goo.im/devs/Sportsstar89/Ruby/CM-10.1
Here's the link I'm successfully running the 701 zip. However I'm running 4ext recovery not cwm. I think it's recommended maybe required to use 4ext recovery. Google it, if so Google how to flash 4 ext. I can't give y instructions don't know that well. And I just meant wipe then install from zip.
ghost582 said:
http://goo.im/devs/Sportsstar89/Ruby/CM-10.1
Here's the link I'm successfully running the 701 zip. However I think it's recommended maybe required to use 4ext recovery. Google it, if so Google how to flash 4 ext. I can't give y instructions don't know that well. And I just meant wipe the install from zip.
Click to expand...
Click to collapse
ok so heres what i will do
get that zip again
and have the patch
and the google apps
unzip the 7.01 build and copy that boot and run the fastboot devices
go in with clockwork mod
clean wipe data
clea wipe cache
battery status
delvik cache
format data
format cache
format sd ext
format sd card
all that
then install 7.01 build from zip
install patch from zip
install camera from 4.3 libs zip
and then what? u said something about reflashing?
K your out of my knowledge. I've never had to unzip and flash anything also I'm not sure what patch your talking about. So rather than doing what I said post here http://forum.xda-developers.com/showthread.php?t=2217075
I don't want you to mess your phone up from my advice so yeah post toot question there. More advanced users will be able to help you. Mine I just flashed in 4ext and it worked no unzipping no patching,
---------- Post added at 11:12 PM ---------- Previous post was at 11:02 PM ----------
Did you flash the camera lib on your current Rom? If so why? If it didn't directly say that in the instructions for that Rom that may have broke your camera. Also why are you using fast boot, then cwm. What are you using fastboot for?
For the Rom I linked I don't believe you need a patch I haven't read anything about it I didn't need one. If you want to switch to 4ext go to 4ext.net and download recovery updater, it will flag 4ext for you then do exactly this
Wipe data factory reset
Wipe cache /dalvik
Install from zip
Flash the Rom
Install from zip
Flash the gapps package. Thus Rom is JB make sure you have the JB gapps. If not Google it
ghost582 said:
K your out of my knowledge. I've never had to unzip and flash anything also I'm not sure what patch your talking about. So rather than doing what I said post here http://forum.xda-developers.com/showthread.php?t=2217075
I don't want you to mess your phone up from my advice so yeah post toot question there. More advanced users will be able to help you. Mine I just flashed in 4ext and it worked no unzipping no patching,
---------- Post added at 11:12 PM ---------- Previous post was at 11:02 PM ----------
Did you flash the camera lib on your current Rom? If so why? If it didn't directly say that in the instructions for that Rom that may have broke your camera. Also why are you using fast boot, then cwm. What are you using fastboot for?
For the Rom I linked I don't believe you need a patch I haven't read anything about it I didn't need one. If you want to switch to 4ext go to 4ext.net and download recovery updater, it will flag 4ext for you then do exactly this
Wipe data factory reset
Wipe cache /dalvik
Install from zip
Flash the Rom
Install from zip
Flash the gapps package. Thus Rom is JB make sure you have the JB gapps. If not Google it
Click to expand...
Click to collapse
flash the rom means what again? i thought flash the rom means to install it from zip.
Yeah that's what it means. I was referring to the options you select in recovery. Make sense? In that post though I was sharp talking about flashing a recovery if you wanted that's different I put some basic instructions in there
Here's one guide on flashing 4ext recovery
http://androidforums.com/desire-hd-all-things-root/631481-4ext-recovery-how.html
ghost582 said:
Yeah that's what it means. In that post though I was sharp talking about flashing a recovery if you wanted that's different I put some basic instructions in there
Here's one guide on flashing 4ext recovery
http://androidforums.com/desire-hd-all-things-root/631481-4ext-recovery-how.html
Click to expand...
Click to collapse
where did u get your google apps?
http://goo.im/gapps (wrong link sorry)
Can't post within five minutes
Sorry
Download the one for cm10.1 bookmark the page in case you need a different one later on in life.
Honestly a simple Google search for gapps got that page in two seconds. No one will help you in here if you ask for everything. You've ask me for a link to everything I've said. So I have to spend my time to find your link. I don't mind helping but when all you have to do it search you need to do it yourself
ctdan713 said:
where did u get your google apps?
Click to expand...
Click to collapse
i am in 4ext recovery touch and following your instrctions but it says it cant mount sd card?
If possible try another sd card.
Are you referring to the internal or external?
ghost582 said:
If possible try another sd card.
Are you referring to the internal or external?
Click to expand...
Click to collapse
i did what u said and got stuck with 4ext starting over and over and over again
so i switched back to clockwork mod and will see what happens.
i hope your right because u have a 7.01 build and no issues and i cant seem to get past this.
You didn't answer my question what sd card won't mount? And before you stay just doing things research your problem if 4ext went find sd you should have Googled that issue before you went back to cwm, jumping without knowing is what's going to Mess things up. So stop changing things and do some research.
ctdan713 said:
i did what u said and got stuck with 4ext starting over and over and over again
so i switched back to clockwork mod and will see what happens.
i hope your right because u have a 7.01 build and no issues and i cant seem to get past this.
Click to expand...
Click to collapse
seriously! thank you for all your help! IT WORKS!
ctdan713 said:
i did what u said and got stuck with 4ext starting over and over and over again
so i switched back to clockwork mod and will see what happens.
i hope your right because u have a 7.01 build and no issues and i cant seem to get past this.
Click to expand...
Click to collapse
What do you mean starting over and over. In the previous post you said it was working but couldn't mount sd. What happened to make it go from working to boot looping. Exactly what did you do? How far does it go before restarting? Is the recovery that's bootlooping or the Rom? I need way more info than your posting
Sent from my Amaze 4G
---------- Post added 7th July 2013 at 12:00 AM ---------- Previous post was 6th July 2013 at 11:55 PM ----------
Hit the thanks button
Sent from my Amaze 4G
---------- Post added at 12:37 AM ---------- Previous post was at 12:00 AM ----------
What recovery finally worked for you? And if everything is running well make a backup before you start tweaking it that way if something goes wrong you can just restore your backup instead of having to stay over from scratch
Personally
I make a backup after a clean install then after I restore my apps then after mods then final. And I delete the post one when I have a working newer one. That way my sd isn't full of backups
Sent from my Amaze 4G
Stock LG build JDQ39B.V50010A US + BusyBox + Root + TWRP
for LG G Pad 8.3 V500 ONLY!
Android 4.2.2
Disclaimer:
I am not responsible for anything you do to your device but I will do my best to assist if something goes wrong!
Purpose:
My purpose for making this is that I wanted a easy way to go back and forth between 50020B and 50010A. I have tested this a few times and it works well. much easier than flashing the kdz. Also aosp roms dont play well with the 4.4.2 bootloader but they work great with 4.2.2. so if anyone decides to use this let us know how it goes
Features:
Official Stock 4.2.2 LG build JDQ39B.V50010A US + Stock 4.2.2 Kernel
NO Data Wipe (you get to keep: data/media Ex. photos, music and such)
flashes over existing Recovery and ABOOT (you get the right TWRP for this firmware)
SuperSU 1.94 + su binary Installed
BusyBox 1.22.1-Stericson Installed
Wipes Dalvik-Cache and Cache partition
Download
LG-V500_JDQ39B.V50010A_US_Stock-BB-Rooted.zip
Install:
Boot into TWRP recovery.
Wipe --> factory reset
Make a Full backup before proceeding. (optional)
Flash .zip file in TWRP recovery.
Go take a walk, make some coffee, pace around nervously. Keep Calm... this will take a while! Be patient!!
Reboot device.
now restore or flash your favorite AOSP rom
Credits:
@id10terror as this is based on his rom zips so please stop by one of his threads and thank him
@Jessooca for supplying the KDZ this is based off of http://forum.xda-developers.com/showpost.php?p=51468259&postcount=8
@autoprime - for 4.4.2 initial root method
@Chainfire - for SuperSU and install script
@jazzruby - BusyBox install script
one more for me
Thanks for putting this together! This will help a lot of people! :good:
Blessed be thy name! Flashed and now I don't have that crappy dimming issue now. Thank you so much! :thumbup::thumbup::thumbup::thumbup:
Thanks a lot!
it works very fine here!
Do we have to wipe everything and do a factory reset...? But the discription says we keep data? A bit confused....
Sent from my LG-V500 using XDA Free mobile app
magnum73 said:
Do we have to wipe everything and do a factory reset...? But the discription says we keep data? A bit confused....
Sent from my LG-V500 using XDA Free mobile app
Click to expand...
Click to collapse
If you are using twrp then in wipe tab go to advanced and choose data, system, cache and dalvik. That's what i did. Then flash the LG rom.
As you wiped data your apps will be restored from play store. It would be wise to make backups with titanium and saved them on your PC so you can restore some/all user app data. Don't restore any system data.
So having 4.2.2 bootloader back on my device I'm restoring nandroid of my last clean flash which was SlimKat 4.8. Then I'll flash 4.9 over it to have access to sd card until tomorrow when I'll clean flash incoming SlimKat 5.0
I'm a Slim man as you can see from my signature.
@Drgravy, this 4.2.2 flashable zip is a life saver for those who like me experimented with LG 4.4.2 but want to come back to 4.2.2 bootloader to get rid of the dimming. Thank you so much!
Since now I'm going to call you Profesor Gravy
magnum73 said:
Do we have to wipe everything and do a factory reset...? But the discription says we keep data? A bit confused....
Sent from my LG-V500 using XDA Free mobile app
Click to expand...
Click to collapse
all that means is you get to keep your data/media
Ex. photos,music and such
if you dont do a factory reset you will probably end up in a boot loop
Natakranta said:
If you are using twrp then in wipe tab go to advanced and choose data, system, cache and dalvik. That's what i did. Then flash the LG rom.
As you wiped data your apps will be restored from play store. It would be wise to make backups with titanium and saved them on your PC so you can restore some/all user app data. Don't restore any system data.
So having 4.2.2 bootloader back on my device I'm restoring nandroid of my last clean flash which was SlimKat 4.8. Then I'll flash 4.9 over it to have access to sd card until tomorrow when I'll clean flash incoming SlimKat 5.0
I'm a Slim man as you can see from my signature.
@Drgravy, this 4.2.2 flashable zip is a life saver for those who like me experimented with LG 4.4.2 but want to come back to 4.2.2 bootloader to get rid of the dimming. Thank you so much!
Since now I'm going to call you Profesor Gravy
Click to expand...
Click to collapse
HAHA be sure to thank @id10terror also this is based on his flashable roms
anyways glad it helped you out
The version of TWRP that comes with this ROM please?
yawako said:
The version of TWRP that comes with this ROM please?
Click to expand...
Click to collapse
2.7.0.0 IIRC
Sent from my Nexus 5 using Tapatalk
Natakranta said:
If you are using twrp then in wipe tab go to advanced and choose data, system, cache and dalvik. That's what i did. Then flash the LG rom.
As you wiped data your apps will be restored from play store. It would be wise to make backups with titanium and saved them on your PC so you can restore some/all user app data. Don't restore any system data.
So having 4.2.2 bootloader back on my device I'm restoring nandroid of my last clean flash which was SlimKat 4.8. Then I'll flash 4.9 over it to have access to sd card until tomorrow when I'll clean flash incoming SlimKat 5.0
I'm a Slim man as you can see from my signature.
Click to expand...
Click to collapse
I'm currently on Cm11 coming from 4.4.2 stock with brightness issue...
If I do a nandroid backup first of my current CM11, then I flash this one to go back to 4.2 and then restore my CM11 nandroid backup, will it work?
As far as I understood, the brightness issue is just bootloader related, so I don't know if my nandroid backup will erase the bootloader or not...
El Montezuma said:
I'm currently on Cm11 coming from 4.4.2 stock with brightness issue...
If I do a nandroid backup first of my current CM11, then I flash this one to go back to 4.2 and then restore my CM11 nandroid backup, will it work?
As far as I understood, the brightness issue is just bootloader related, so I don't know if my nandroid backup will erase the bootloader or not...
Click to expand...
Click to collapse
Nandroid never backs up bootloader. So it should work as good for your CM as it worked for my SlimKat.
Though there is now easier method. See this thread:
[HOWTO][V500] Flashable zips to change between 4.2.2 and 4.4.2 Base and flash 4.2.2 base.
Natakranta said:
Nandroid never backs up bootloader. So it should work as good for your CM as it worked for my SlimKat.
Though there is now easier method. See this thread:
[HOWTO][V500] Flashable zips to change between 4.2.2 and 4.4.2 Base and flash 4.2.2 base.
Click to expand...
Click to collapse
Great! Sounds good, will try it.
Many thanks
Ok, just to confirm that it works.
My tab was on 4.4.2 out of the box. I install CM11 directly without reading a little (my mistake), and I discover brightness dimmer issue... I play with Lux to try to find a solution during a week but no success...
So, the solution is to revert back to 4.2.2 stock (or to a rom based on 4.2.2 stock) to install the correct bootloader and then restore your 4.4.2 Nandroid backup.
Here the steps:
-Nandroid backup of your tab
-Titanium backup (in case of, double protection)
-Copy the zip into the internal memory of the tab
-Reboot in recovery mode
-Do a factory reset (wipe system, cache, data (except data/media))
-Flash the zip
-Wipe dalvik/cache (not mandatory but...)
-Reboot into recovery mode FROM recovery (do not reboot system at this point)
-Restore your Nandroid backup
-Reboot system
-Enjoy
Cheers
its flashing for about 3 hours now and is still going on.. was that meant with to be patient or is there something wrong? Having brightness issues on CM rom and have 4.4.2 base... that's why im trying to flash this.
Extracting busybox...
Done.
Extractiong images to flash...
Hi,
The OP is nice... but the problem when you want to downgrade from 4.4.2 to 4.2.2 is that in 4.4.2 it's difficult to boot into recovery.
And I'm looking for a way to root, unlock and install a recovery on my LG G Pad 8.3 with FW 1020D installed.
I am able to root it, that's not a problem.
But when I install a Recovery using Flashify and then reboot, I end up with a LG screen with two lines at the top saying that boot is void because of security check failure.
Isn't there a simple way to flash this beast ?
And why on earth are those stupid [email protected] at LG forcing us to use their stupid, inefficient and BUGGY software ?
Regards.
I've been flashing this to my GPad, and it keeps booting into TWRP, and ONLY TWRP. I sold my GPad on eBay, and I need to ship it out soon since the buyer paid, and I'm sure he'd want it in hand sooner rather than later. What am I doing wrong? I'm in process of trying this again, but I dunno if it'll matter since it failed twice already....
Suggestions?
EDIT: Also if there's a way to relock the bootloader and unroot that'd be great too. Thanks.
EDIT 2: I know that you can use the LG Mobile Support Tool but it needs a native (apparently won't work in a VM too well) Windows install, of which I do not have at the moment. Is there a way to do it on Mac OS X 10.9?
Shiggity said:
I've been flashing this to my GPad, and it keeps booting into TWRP, and ONLY TWRP. I sold my GPad on eBay, and I need to ship it out soon since the buyer paid, and I'm sure he'd want it in hand sooner rather than later. What am I doing wrong? I'm in process of trying this again, but I dunno if it'll matter since it failed twice already....
Suggestions?
EDIT: Also if there's a way to relock the bootloader and unroot that'd be great too. Thanks.
EDIT 2: I know that you can use the LG Mobile Support Tool but it needs a native (apparently won't work in a VM too well) Windows install, of which I do not have at the moment. Is there a way to do it on Mac OS X 10.9?
Click to expand...
Click to collapse
It worked for me few moths ago when I needed to come back to 4.2.2 base to get rid of dimming bug on AOSP KitKat ROMs.
Did you wipe in TWRP cache, data, system, dalvik? All 4 of them need to be wiped/formatted. Do it in TWRP Wipe: Advanced menu.
Natakranta said:
It worked for me few moths ago when I needed to come back to 4.2.2 base to get rid of dimming bug on AOSP KitKat ROMs.
Did you wipe in TWRP cache, data, system, dalvik? All 4 of them need to be wiped/formatted. Do it in TWRP Wipe: Advanced menu.
Click to expand...
Click to collapse
Okay I'll try that, but yeah. Not having any high hopes.
---------- Post added at 07:12 PM ---------- Previous post was at 06:55 PM ----------
@ Natakranta: nope. Still only boots to TWRP.
---------- Post added at 07:37 PM ---------- Previous post was at 07:12 PM ----------
It's imminent that I have this tablet working since the person paid, and I don't know if he's tech savvy enough to flash a different ROM if I was to put an AOSP/AOKP ROM onto it....
Someone please help.
Shiggity said:
Okay I'll try that, but yeah. Not having any high hopes.
---------- Post added at 07:12 PM ---------- Previous post was at 06:55 PM ----------
@ Natakranta: nope. Still only boots to TWRP.
---------- Post added at 07:37 PM ---------- Previous post was at 07:12 PM ----------
It's imminent that I have this tablet working since the person paid, and I don't know if he's tech savvy enough to flash a different ROM if I was to put an AOSP/AOKP ROM onto it....
Someone please help.
Click to expand...
Click to collapse
Maybe there's something wrong with your recovery.
Download TWRP 2710 zip and flash it in recovery. Them reboot recovery. Try flashing stock ROM again.
Maybe it will work.
Hi guys,
I have the SGH-i777 and it's been a long time since I've tinkered with it, so wanted to get clarification on updating CWM before I do anything.
I'm currently running the AOKP Jellybean Rom and I have CWM 6.0.2.3 installed. I'd like to update to CM 11 and I see that this requires CWM 6.0.4.4 or higher. They've provided a link to a combination recovery/kernel from mr-cook that apparently has CWM 6.0.4.5.
My question is, how do I get that kernel onto my phone? My guess is I download it, throw it on my SD card, boot into CWM recovery and install it from there. When that's complete, I wipe data/factory reset/wipe cache/dalvik cache from recovery, then install the CM rom, GApps, and then I'm done. Is that correct?
Thanks and sorry if this is dumb. :silly:
jankypatella said:
Hi guys,
I have the SGH-i777 and it's been a long time since I've tinkered with it, so wanted to get clarification on updating CWM before I do anything.
I'm currently running the AOKP Jellybean Rom and I have CWM 6.0.2.3 installed. I'd like to update to CM 11 and I see that this requires CWM 6.0.4.4 or higher. They've provided a link to a combination recovery/kernel from mr-cook that apparently has CWM 6.0.4.5.
My question is, how do I get that kernel onto my phone? My guess is I download it, throw it on my SD card, boot into CWM recovery and install it from there. When that's complete, I wipe data/factory reset/wipe cache/dalvik cache from recovery, then install the CM rom, GApps, and then I'm done. Is that correct?
Thanks and sorry if this is dumb. :silly:
Click to expand...
Click to collapse
Yes. Put that file at the root of your external card. Boot into CWM, flash that kernel, and then personally I'd reboot into recovery again. The rest of your route was fine, just wipe cache and Dalvik AFTER you flash ROM and gapps.
desteele said:
Yes. Put that file at the root of your external card. Boot into CWM, flash that kernel, and then personally I'd reboot into recovery again. The rest of your route was fine, just wipe cache and Dalvik AFTER you flash ROM and gapps.
Click to expand...
Click to collapse
Great, thanks.
Out of curiosity - why do you recommend wiping cache and dalvik after flashing the rom and gapps? CM's instructions recommend to do that before flashing rom/gapps. Is it just a matter of preference?
jankypatella said:
Great, thanks.
Out of curiosity - why do you recommend wiping cache and dalvik after flashing the rom and gapps? CM's instructions recommend to do that before flashing rom/gapps. Is it just a matter of preference?
Click to expand...
Click to collapse
Well, the more knowledgable folk than me on here usually list wiping dalvik/cache after ROM/Gapps, so, it makes sense to me to do what they say. It's not going to hurt anything, and actually a factory reset wipes both of those anyway, I believe.
Be sure that kernel you are loading is compatible with your current ROM, unless you have no intentions of booting back into the ROM, and only into the recovery.
desteele said:
Be sure that kernel you are loading is compatible with your current ROM, unless you have no intentions of booting back into the ROM, and only into the recovery.
Click to expand...
Click to collapse
Yup, looks like this isn't the case. I installed the kernel, then chose "Reboot now" from CWM's menu. It powered up, displayed the Samsung logo, and then the screen turned black. I held the power button for a bit and saw that it was off, so I tried holding the vol up + down buttons and power and booting into Download mode. (Phone had a full charge and was plugged into USB power source while doing this)
I'm now in Download mode and it says the following on the screen:
ODIN MODE
PRODUCT NAME: SGH-i777
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
[picture of an android]
Downloading...
Do not turn off target!!
Click to expand...
Click to collapse
What should I do now? If I remember right, this isn't a terrible screen and I can in fact power down the device and try again. How do I get back into recovery mode to continue installing the new rom?
jankypatella said:
Yup, looks like this isn't the case. I installed the kernel, then chose "Reboot now" from CWM's menu. It powered up, displayed the Samsung logo, and then the screen turned black. I held the power button for a bit and saw that it was off, so I tried holding the vol up + down buttons and power and booting into Download mode. (Phone had a full charge and was plugged into USB power source while doing this)
I'm now in Download mode and it says the following on the screen:
What should I do now? If I remember right, this isn't a terrible screen and I can in fact power down the device and try again. How do I get back into recovery mode to continue installing the new rom?
Click to expand...
Click to collapse
Well, you can use this thread where @creepyncrawly walks someone through using Odin in download mode.
http://forum.xda-developers.com/galaxy-s2-att/help/stuck-samsung-screen-t2803266
But do me a favor...make sure you are holding BOTH Volume + AND Volume - as well as power, and let the Samsung logo flash once, then when it comes back, let go. If it works, you'll be in Recovery, and you can try to flash your new ROM.
desteele said:
But do me a favor...make sure you are holding BOTH Volume + AND Volume - as well as power, and let the Samsung logo flash once, then when it comes back, let go. If it works, you'll be in Recovery, and you can try to flash your new ROM.
Click to expand...
Click to collapse
This was it. I wasn't timing the let go part right and I also had the device plugged in to a power source. Once I took care of that, I was able to get into recovery easily and continue the installation.
Thanks a lot!
jankypatella said:
This was it. I wasn't timing the let go part right and I also had the device plugged in to a power source. Once I took care of that, I was able to get into recovery easily and continue the installation.
Thanks a lot!
Click to expand...
Click to collapse
No worries...glad it wasn't borked.
desteele said:
No worries...glad it wasn't borked.
Click to expand...
Click to collapse
I tried to boot into the new ROM and get this error repeatedly on the start screen:
Unfortunately, the process com.android.phone has stopped.
Click to expand...
Click to collapse
Not sure what to do now. I went back into recovery and wiped the cache/dalvik cache again, but to no avail. I looked in the development thread and there's one post saying that I need to flash renderbroken's custom kernel after I flash the ROM and GApps. There's also a link to download renderbroken's CM kernel but I'm confused now because I also read that renderbroken doesn't update the kernels anymore, which is why they recommend the mr-cook kernel...
Any advice here? Is the renderbroken kernel the "right" one? Could I brick my phone if I try installing and reinstalling a few different kernels to get the issue solved?
jankypatella said:
I tried to boot into the new ROM and get this error repeatedly on the start screen:
Not sure what to do now. I went back into recovery and wiped the cache/dalvik cache again, but to no avail. I looked in the development thread and there's one post saying that I need to flash renderbroken's custom kernel after I flash the ROM and GApps. There's also a link to download renderbroken's CM kernel but I'm confused now because I also read that renderbroken doesn't update the kernels anymore, which is why they recommend the mr-cook kernel...
Any advice here? Is the renderbroken kernel the "right" one? Could I brick my phone if I try installing and reinstalling a few different kernels to get the issue solved?
Click to expand...
Click to collapse
Well, even Render's old kernel would work, but, no, he hasn't updated in a long time. You can use Rogersb's kernel (found here: http://www.androidfilehost.com/?w=files&flid=15966), but specifically which ROM are you trying to install?
desteele said:
Well, even Render's old kernel would work, but, no, he hasn't updated in a long time. You can use Rogersb's kernel (found here: http://www.androidfilehost.com/?w=files&flid=15966), but specifically which ROM are you trying to install?
Click to expand...
Click to collapse
CM 11. I grabbed cm-11-20140403-UNOFFICIAL-i777.zip from the download links in the CM 11 OP.
:crying:
jankypatella said:
CM 11. I grabbed cm-11-20140403-UNOFFICIAL-i777.zip from the download links in the CM 11 OP.
Click to expand...
Click to collapse
Then go to this page and download either the CWM or TWRP version. Not the Slim version.
http://www.androidfilehost.com/?w=files&flid=15966
I favor TWRP, but if you are comfortable with CWM, grab that one, and flash it after you flash your ROM. I'd factory reset again first, then wipe cache/dalvik after.
I will also say this...that ROM you are installing is a fairly old version...you might consider updating to something a bit newer.
---------- Post added at 11:25 PM ---------- Previous post was at 11:19 PM ----------
Here are a couple you might consider:
SlimSaber
http://forum.xda-developers.com/showthread.php?t=2772468
Resurrection Remix (not updated anymore, but an awesome ROM)
http://forum.xda-developers.com/showthread.php?t=2667734
And Cyril seems to have SlimKat going pretty well...
http://forum.xda-developers.com/showthread.php?t=2760074
desteele said:
:crying:
Then go to this page and download either the CWM or TWRP version. Not the Slim version.
http://www.androidfilehost.com/?w=files&flid=15966
I favor TWRP, but if you are comfortable with CWM, grab that one, and flash it after you flash your ROM. I'd factory reset again first, then wipe cache/dalvik after.
I will also say this...that ROM you are installing is a fairly old version...you might consider updating to something a bit newer.
Click to expand...
Click to collapse
Okay so I should do it like this... factory reset, flash the ROM again, flash this new kernel I'm downloading now, wipe cache/dalvik. Yes? And here's another probably stupid question. How do I get this new kernel onto my SD card? Seeing as I can't get into Android and mount the SD card through the GUI...
jankypatella said:
Okay so I should do it like this... factory reset, flash the ROM again, flash this new kernel I'm downloading now, wipe cache/dalvik. Yes? And here's another probably stupid question. How do I get this new kernel onto my SD card? Seeing as I can't get into Android and mount the SD card through the GUI...
Click to expand...
Click to collapse
Find the "Mounts" menu in CWM..>I think it's in Advanced...and select the "Mount as USB" and it should show up in your PC as an external drive. Drop your kernel into your external card root.
And yes to the rest of your question...
Oops, no, just "Mounts and Storage" in the main menu. You prob already saw that tho.
---------- Post added at 11:37 PM ---------- Previous post was at 11:33 PM ----------
And don't forget gapps...
desteele said:
Find the "Mounts" menu in CWM..>I think it's in Advanced...and select the "Mount as USB" and it should show up in your PC as an external drive. Drop your kernel into your external card root.
And yes to the rest of your question...
Oops, no, just "Mounts and Storage" in the main menu. You prob already saw that tho.
---------- Post added at 11:37 PM ---------- Previous post was at 11:33 PM ----------
And don't forget gapps...
Click to expand...
Click to collapse
Success... I'm in! Thanks so much for your help, and thanks for linking me to a few other ROMs. I'll be checking those out as well.
jankypatella said:
Success... I'm in! Thanks so much for your help, and thanks for linking me to a few other ROMs. I'll be checking those out as well.
Click to expand...
Click to collapse
Really glad it worked out for you!
Self-explanatory really.
I updated my phone a few weeks ago to Omnirom 4.4.4, one of the nightly builds and everything was going well.
Today I installed a couple of apps, and tonight the screen started flickering and the phone reset, however when it started again, it went into a bootloop.
How do I get it working again without losing the files that are on the internal memory? (I don't know which resets in CWM delete personal data)
Thanks
septimoose said:
Self-explanatory really.
I updated my phone a few weeks ago to Omnirom 4.4.4, one of the nightly builds and everything was going well.
Today I installed a couple of apps, and tonight the screen started flickering and the phone reset, however when it started again, it went into a bootloop.
How do I get it working again without losing the files that are on the internal memory? (I don't know which resets in CWM delete personal data)
Thanks
Click to expand...
Click to collapse
Flash latest (6.0.4.7) CWM or latest TWRP (2.7.1.0 if Im not wrong) and reflash the rom.
Wiping data, and formatting partitions doesnt get you wiped internal memory files; but apps and things installed.
NaminatoR1254jaime.sier said:
Flash latest (6.0.4.7) CWM or latest TWRP (2.7.1.0 if Im not wrong) and reflash the rom.
Wiping data, and formatting partitions doesnt get you wiped internal memory files; but apps and things installed.
Click to expand...
Click to collapse
I did this, and I'm still stuck in a bootloop, it gets as far as the "Omni" animation, and then reboots
Any advice?
septimoose said:
I did this, and I'm still stuck in a bootloop, it gets as far as the "Omni" animation, and then reboots
Any advice?
Click to expand...
Click to collapse
Flash stock ROM via Odin
verny94 said:
Flash stock ROM via Odin
Click to expand...
Click to collapse
I'm sorry for my ignorance, but would you happen to know of a guide for flashing the stock ROM?
Would it fix by flashing a different ROM, such as Cyanogenmod which I have in the download folder on the phone?
If like you said you don't want to lose data don't flash stock rom this will wipe your data fist thing you need to do is install PhilZ recovery then look here >> http://forum.xda-developers.com/galaxy-s3/orig-development/i93xx-philz-touch-t2002953 << then look at the special features section here >> http://forum.xda-developers.com/showthread.php?p=39433728#post39433728 << look for the aroma file manager and how to use.
You will then be able to boot into recovery browse your internal files with aroma and move and copy/backup what you need,once you have done all that you will then be able to return to stock with odin.
Edit
Guide for flashing stock rom here >> http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125 <<
---------- Post added at 11:21 AM ---------- Previous post was at 11:10 AM ----------
septimoose said:
I'm sorry for my ignorance, but would you happen to know of a guide for flashing the stock ROM?
Would it fix by flashing a different ROM, such as Cyanogenmod which I have in the download folder on the phone?
Click to expand...
Click to collapse
If you don't want to lose your data then no because you need to wipe your data....Did you reboot into recovery and wipe cache advanced delvik cache? Also read my suggestions above