Stock LG build KOT49I.V50020A\V50020B GB EU + BusyBox + Root
for LG G Pad 8.3 V500 ONLY!
Android 4.4.2 Kit Kat :victory:
Disclaimer:
Use this at your own risk. I have personally flashed and tested this build on my own device successfully.
I am not responsible for any damage or data loss encountered due to whatever reason.
Please ensure that you make a full backup of your system before flashing anything.
KOT49I.V50020B OTA*** NEW ***
Features:
Official Stock 4.4.2 LG build KOT49I.V50020B GB EU+ Stock 4.4.2 Kernel
NO Data Wipe
Doesn't flash over existing Recovery or ABOOT (you keep TWRP and retain loki-exploit)
SuperSU 1.94 + su binary Installed
BusyBox 1.22.1-Stericson Installed
Wipes Dalvik-Cache and Cache partition
Working English QVoice and Q Apps
External SD R\W Fix
Downloads:
LG-V500_KOT49I.V50020B_GB_Stock-BB-Rooted.zip (hosted on AndroidFileHost)
Mirrors:
<coming soon...>
md5: 356ba967978ababe124cc30b635c291f
KDZ file for those that want to Flash using that method (these are unmodified KDZ files
, so they are not rooted):
V50020B_00-GB.kdz.zip (hosted on Copy.com)
md5: abac3a356d9bc2cfc7134bd2e737e029
V50020B_00.kdz (From Official LG Servers)
md5: 3172cd8d7f20219453e085f069f30dcb
Click to expand...
Click to collapse
KOT49I.V50020a
Features:
Official Stock 4.4.2 LG build KOT49I.V50020a GB EU+ Stock 4.4.2 Kernel
NO Data Wipe
Doesn't flash over existing Recovery or ABOOT (you keep TWRP and retain loki-exploit)
SuperSU 1.94 + su binary Installed
BusyBox 1.22.1-Stericson Installed
Wipes Dalvik-Cache and Cache partition
Working English QVoice and Q Apps
Downloads:
LG-V500_KOT49I.V50020a_GB_Stock-BB-Rooted.zip (hosted on AndroidFileHost)
Mirrors:
LG-V500_KOT49I.V50020a_GB_Stock-BB-Rooted.zip (hosted on Mega)
LG-V500_KOT49I.V50020a_GB_Stock-BB-Rooted.zip (hosted on Copy.com)
md5: c1570c68405b97d1e4a7889eaacbbbae
KDZ file for those that want to Flash using that method (these are unmodified KDZ files
, so they are not rooted):
V50020A_00_GB.kdz.zip (hosted on AndroidFileHost)
md5: c3af7d3bb70e8e0e41187d7968d8f4bc
V50020a_00.kdz (From Official LG Servers)
Click to expand...
Click to collapse
Prerequisites:
TWRP 2.7.0.0 Installed and working (not tested on CWM recovery)
FULL nandroid Backup
At least 3GB free space on internal memory (not including ZIP file)
Install:
Boot into TWRP recovery.
*** Make a Full backup before proceeding. ***
Flash .zip file in TWRP recovery.
Go take a walk, make some coffee, pace around nervously. Keep Calm... this will take a while! Be patient!!
Flash TWRP 2.7.0.1 for 4.4.2 in recovery (if not already installed)
Reboot device.
Enjoy!!
Many Thanks to
@autoprime - for 4.4.2 initial root method
@Drgravy - for TWRP for V500
@Chainfire - for SuperSU and install script
@jazzruby - BusyBox install script
mine...mine...mine...2nd post is ALL MINE! muahahaha:laugh::silly:
Goodies & Add-ons:
LG OSP (On-Screen Phone) for Windows
LG On-Screen Phone is the service that allows you to view and manipulate your phone remotely via a PC, with the keyboard/mouse input from
the PC. You can also easily exchange data between the PC and your phone
Features
1. You can write, send and receive messages(SMS or other messengers) via PC.
2. You can transfer file contents in Gallery, Music, Video Player, Office Viewer in your phone to the PC by drag & drop.
3. You can easily transfer files from the PC to your phone by dragging & dropping.
4. You can get real-time event notification from the phone.
5. You can see the whole pages of Home Screens in Panorama View. (Only with LG Home)
6. Multi-touch input using keyboard/mouse.
Download:
LG OSP v4.0.004.130823 for Windows
Click to expand...
Click to collapse
No longer needed for US users. See official US build thread here.
Optional build.prop changes for US users
Code:
ro.product.locale.region=GB
ro.build.target_country=EU
ro.build.target_region=EU
to
Code:
ro.product.locale.region=US
ro.build.target_country=NA
ro.build.target_region=NA
Click to expand...
Click to collapse
Known Issues & Fixes:
Boot loop when booting into TWRP with USB plugged in
FIX: Install TWRP 2.7.0.1 for 4.4.2, this fixes bootloop while USB plugged in, and also fixes screen dimming issue.
Workaround: If running TWRP 2.7.0.0 for 4.2.2 - Unplug USB after device reboots. It should boot into Recovery without issue. Replug USB after TWRP has booted.
Click to expand...
Click to collapse
V50020B build.prop (unmodified)
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49I.V50020b
ro.build.display.id=KOT49I.V50020b
ro.build.version.incremental=.1395810977
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Wed Mar 26 14:26:20 KST 2014
ro.build.date.utc=1395811580
ro.build.type=user
ro.build.user=patrickym.kim
ro.build.host=vegita119
ro.build.tags=release-keys
ro.product.model=LG-V500
ro.product.brand=lge
ro.product.name=awifi_open_eu
ro.product.device=awifi
ro.product.board=AWIFI
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=11
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=awifi
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=awifi_open_eu-user 4.4.2 KOT49I.V50020b .1395810977 release-keys
ro.build.fingerprint=lge/awifi_open_eu/awifi:4.4.2/KOT49I.V50020b/.1395810977:user/release-keys
ro.build.characteristics=tablet
# end build properties
#
# from device/lge/awifi/system.prop
#
################################################################
# COMMON system property for this device (geefhd).
# operator-specific property MUST NOT be here.
################################################################
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=1
ro.hdmi.enable=true
lpa.decode=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
#mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# System prop to disable a2dp sink which is enabled by default
bluetooth.a2dp.sink.enabled=false
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
#LGE_CHANGE_S 2013.01.31 QCT CABL OFF
ro.qualcomm.cabl=2
#LGE_CHANGE_S 2013.01.31 QCT CABL OFF
# System props for telephony
# System prop to turn on CdmaLTEPhone always
# [email protected] awifi do not use lte telephony feature
#telephony.lteOnCdmaDevice=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
# LGE_CHANGE_S
# If you use Internal-SD with FUSE, comment-out below
# 2012-01-08 [email protected]
#persist.fuse_sdcard=false
# LGE_CHANGE_E
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
# LGE_CHANGE_S [email protected] 2012.4.22 LGE sound profile scenario.
ro.lge.audio_soundprofile=true
# LGE_CHANGE_E [email protected] 2012.4.22 LGE sound profile scenario.
#LGBT_COMMON_SCENARIO supported Bluetooth PAN profile 2012-05-22
ro.bluetooth.PANenable = 1
#LGBT_COMMON_SCENARIO
# System prop for sensor
ro.qc.sdk.sensors.gestures=true
# LGE_CHANGE_S 2012-12-11, [email protected], HDMI block
sys.hdmi.block=unblock
# LGE_CHANGE_E 2012-12-11, [email protected], HDMI block
# Increase texture cache size for FHD models (24MB -> 32MB)
ro.hwui.texture_cache_size=32
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
# LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up
# reserved wifi related property
dhcp.ap.macaddress=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
dhcp.wlan0.vendorInfo=
dhcp.p2p.dns1=
dhcp.p2p.dns2=
dhcp.p2p.dns3=
dhcp.p2p.dns4=
dhcp.p2p.gateway=
dhcp.p2p.ipaddress=
dhcp.p2p.leasetime=
dhcp.p2p.mask=
dhcp.p2p.pid=
dhcp.p2p.reason=
dhcp.p2p.result=
dhcp.p2p.server=
dhcp.p2p.vendorInfo=
init.svc.dhcpcd_wlan0=
init.svc.dhcpcd_p2p=
init.svc.p2p_supplicant=
init.svc.iprenew_wlan0=
net.dns1=
net.dns2=
net.dnschange=
net.p2p-p2p0-0.dns1=
net.p2p-p2p0-0.dns2=
net.wlan0.dns1=
net.wlan0.dns2=
wlan.driver.status=
persist.sys.security=
persist.sys.hotssid.ksc5601=
wifi.lge.autochannel=
# LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up
# LGE_CHANGE_S 2013-05-21 [email protected], Support modem
persist.lge.modem.support=false
# LGE_CHANGE_E 2013-02-19 [email protected], Support modem
#disable gapless mode by default
audio.gapless.playback.disable=true
# LGE_CHANGE_S [awifi][framework][common] the screen auto-brightness adjustment setting
persist.power.useautobrightadj=true
# LGE_CHANGE_E [awifi][framework][common] the screen auto-brightness adjustment setting
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.build.target_operator=OPEN
ro.build.target_country=EU
ro.build.target_region=EU
ro.3lm.build.lg=false
ro.lge.basebandversion=M9615A-CEFWTAZM-4.0.10353
tangible_device_config=T1BCNAOTDO
ro.lge.swversion=V50020b
ro.lge.factoryversion=LGV500AT-00-V20b-EUR-XX-MAR-26-2014+0
ro.config.ringtone=00_Lifes_Good.ogg
ro.config.notification_sound=Lifes_Good_Noti.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.camera.sound.forced=1
keyguard.no_require_sim=true
ime_feature_0=vibration_pattern:0:25;keyboard_layout:ko=QWERTY
ro.lge.lcd_default_brightness=164
ro.lge.lcd_auto_brightness_mode=false
ro.sf.lcd_density=320
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
wifi.supplicant_scan_interval=20
wifi.lge.patch=true
wifi.lge.sleeppolicy=0
wifi.lge.offdelay=false
wifi.lge.hanglessid=true
wifi.lge.ftm_test=1
wlan.lge.supportsimaka=NO
wlan.lge.wifidisplay=both
dhcp.dlna.using=false
ro.tether.denied=true
wlan.chip.vendor=qcom
wlan.lge.concurrency=MCC
wlan.chip.version=wcnss
wifi.lge.supportp2p5g=gconly
drm.service.enabled=true
lge.signed_image=true
persist.sys.strictmode.disable=true
wlan.driver.ath=0
wlan.driver.config=/data/misc/wifi/WCNSS_qcom_cfg.ini
qcom.audio.init=complete
lpa.decode=true
persist.sys.ats_start=false
persist.sys.strictmode.visual=false
lgemm.player.use_android_origin=false
ro.lge.audio_scenario=SOUNDEXCEPTION
ro.lge.audio_soundexception=true
ro.config.vc_call_vol_steps=6
ro.config.vc_call_vol_default=3
ro.airplane.phoneapp=1
ro.lge.overlay=false
lge.version.verified=NONE
persist.service.main.enable=0
persist.service.system.enable=0
persist.service.radio.enable=0
persist.service.events.enable=0
persist.service.kernel.enable=0
persist.service.packet.enable=0
persist.service.crash.enable=0
persist.sys.ssr.restart_level=3
persist.radio.data_no_toggle=1
ro.carrier=unknown
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.lge.ps.eco.pv=322
ro.lge.ps.freqlowlimit=1026000
lge.hw.frontkeyled=false
lge.normalizer.param=version2.0/true/13.5/true/8230/1.0/2050/0.55
bluetooth.chip.vendor=qcom
bluetooth.pan=true
persist.service.btui.use_aptx=1
ro.sdcrypto.syscall=378
ro.lge.b2b.vmware=true
service.knockcode.touchfw=0
ro.lge.capp_ZDi_O=true
lge.zdi.actionsend=false
lge.zdi.onactivityresult=true
lge.zdi.dragdropintent=false
ro.lge.capp_almond=true
ro.lge.capp_wfd=true
ro.lge.qslide.max_window=2
ro.lge.irrc.type=sw
ro.com.google.clientidbase=android-om-lge
ro.com.google.clientidbase.ms=android-om-lge
ro.com.google.clientidbase.am=android-om-lge
ro.com.google.clientidbase.gmm=android-om-lge
ro.com.google.clientidbase.yt=android-om-lge
ro.com.google.gmsversion=4.4.2_r1
ro.setupwizard.mode=DISABLED
ro.livewallpaper.map=DISABLED
ro.com.google.apphider=on
persist.sys.dalvik.vm.lib=libdvm.so
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
V50020A build.prop (unmodified)
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KOT49I.V50020a
ro.build.display.id=KOT49I.V50020a
ro.build.version.incremental=.1395552766
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Sun Mar 23 14:36:17 KST 2014
ro.build.date.utc=1395552977
ro.build.type=user
ro.build.user=patrickym.kim
ro.build.host=vegita119
ro.build.tags=release-keys
ro.product.model=LG-V500
ro.product.brand=lge
ro.product.name=awifi_open_eu
ro.product.device=awifi
ro.product.board=AWIFI
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=LGE
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=11
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=awifi
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=awifi_open_eu-user 4.4.2 KOT49I.V50020a .1395552766 release-keys
ro.build.fingerprint=lge/awifi_open_eu/awifi:4.4.2/KOT49I.V50020a/.1395552766:user/release-keys
ro.build.characteristics=tablet
# end build properties
#
# from device/lge/awifi/system.prop
#
################################################################
# COMMON system property for this device (geefhd).
# operator-specific property MUST NOT be here.
################################################################
#
# system.prop for surf
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=dyn
dalvik.vm.heapsize=36m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
#
# system props for the cne module
#
persist.cne.feature=1
ro.hdmi.enable=true
lpa.decode=true
tunnel.decode=false
tunnel.audiovideo.decode=false
lpa.use-stagefright=true
qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
#mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# System prop to disable a2dp sink which is enabled by default
bluetooth.a2dp.sink.enabled=false
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
#LGE_CHANGE_S 2013.01.31 QCT CABL OFF
ro.qualcomm.cabl=2
#LGE_CHANGE_S 2013.01.31 QCT CABL OFF
# System props for telephony
# System prop to turn on CdmaLTEPhone always
# [email protected] awifi do not use lte telephony feature
#telephony.lteOnCdmaDevice=1
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
#Simulate sdcard on /data/media
#
# LGE_CHANGE_S
# If you use Internal-SD with FUSE, comment-out below
# 2012-01-08 [email protected]
#persist.fuse_sdcard=false
# LGE_CHANGE_E
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
# LGE_CHANGE_S [email protected] 2012.4.22 LGE sound profile scenario.
ro.lge.audio_soundprofile=true
# LGE_CHANGE_E [email protected] 2012.4.22 LGE sound profile scenario.
#LGBT_COMMON_SCENARIO supported Bluetooth PAN profile 2012-05-22
ro.bluetooth.PANenable = 1
#LGBT_COMMON_SCENARIO
# System prop for sensor
ro.qc.sdk.sensors.gestures=true
# LGE_CHANGE_S 2012-12-11, [email protected], HDMI block
sys.hdmi.block=unblock
# LGE_CHANGE_E 2012-12-11, [email protected], HDMI block
# Increase texture cache size for FHD models (24MB -> 32MB)
ro.hwui.texture_cache_size=32
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
# LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up
# reserved wifi related property
dhcp.ap.macaddress=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
dhcp.wlan0.vendorInfo=
dhcp.p2p.dns1=
dhcp.p2p.dns2=
dhcp.p2p.dns3=
dhcp.p2p.dns4=
dhcp.p2p.gateway=
dhcp.p2p.ipaddress=
dhcp.p2p.leasetime=
dhcp.p2p.mask=
dhcp.p2p.pid=
dhcp.p2p.reason=
dhcp.p2p.result=
dhcp.p2p.server=
dhcp.p2p.vendorInfo=
init.svc.dhcpcd_wlan0=
init.svc.dhcpcd_p2p=
init.svc.p2p_supplicant=
init.svc.iprenew_wlan0=
net.dns1=
net.dns2=
net.dnschange=
net.p2p-p2p0-0.dns1=
net.p2p-p2p0-0.dns2=
net.wlan0.dns1=
net.wlan0.dns2=
wlan.driver.status=
persist.sys.security=
persist.sys.hotssid.ksc5601=
wifi.lge.autochannel=
# LGE_CHANGE_S, [WiFi][[email protected]], 2013-01-22, Wifi Bring Up
# LGE_CHANGE_S 2013-05-21 [email protected], Support modem
persist.lge.modem.support=false
# LGE_CHANGE_E 2013-02-19 [email protected], Support modem
#disable gapless mode by default
audio.gapless.playback.disable=true
# LGE_CHANGE_S [awifi][framework][common] the screen auto-brightness adjustment setting
persist.power.useautobrightadj=true
# LGE_CHANGE_E [awifi][framework][common] the screen auto-brightness adjustment setting
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.build.target_operator=OPEN
ro.build.target_country=EU
ro.build.target_region=EU
ro.3lm.build.lg=false
ro.lge.basebandversion=M9615A-CEFWTAZM-4.0.10353
tangible_device_config=T1BCNAOTDO
ro.lge.swversion=V50020a
ro.lge.factoryversion=LGV500AT-00-V20a-EUR-XX-MAR-23-2014+0
ro.config.ringtone=00_Lifes_Good.ogg
ro.config.notification_sound=Lifes_Good_Noti.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.camera.sound.forced=1
keyguard.no_require_sim=true
ime_feature_0=vibration_pattern:0:25;keyboard_layout:ko=QWERTY
ro.lge.lcd_default_brightness=164
ro.lge.lcd_auto_brightness_mode=false
ro.sf.lcd_density=320
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
dalvik.vm.heaputilization=0.25
dalvik.vm.heapidealfree=8388608
dalvik.vm.heapconcurrentstart=2097152
wifi.supplicant_scan_interval=20
wifi.lge.patch=true
wifi.lge.sleeppolicy=0
wifi.lge.offdelay=false
wifi.lge.hanglessid=true
wifi.lge.ftm_test=1
wlan.lge.supportsimaka=NO
wlan.lge.wifidisplay=both
dhcp.dlna.using=false
ro.tether.denied=true
wlan.chip.vendor=qcom
wlan.lge.concurrency=MCC
wlan.chip.version=wcnss
wifi.lge.supportp2p5g=gconly
drm.service.enabled=true
lge.signed_image=true
persist.sys.strictmode.disable=true
wlan.driver.ath=0
wlan.driver.config=/data/misc/wifi/WCNSS_qcom_cfg.ini
qcom.audio.init=complete
lpa.decode=true
persist.sys.ats_start=false
persist.sys.strictmode.visual=false
lgemm.player.use_android_origin=false
ro.lge.audio_scenario=SOUNDEXCEPTION
ro.lge.audio_soundexception=true
ro.config.vc_call_vol_steps=6
ro.config.vc_call_vol_default=3
ro.airplane.phoneapp=1
ro.lge.overlay=false
lge.version.verified=NONE
persist.service.main.enable=0
persist.service.system.enable=0
persist.service.radio.enable=0
persist.service.events.enable=0
persist.service.kernel.enable=0
persist.service.packet.enable=0
persist.service.crash.enable=0
persist.sys.ssr.restart_level=3
persist.radio.data_no_toggle=1
ro.carrier=unknown
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.lge.ps.eco.pv=322
ro.lge.ps.freqlowlimit=1026000
lge.hw.frontkeyled=false
lge.normalizer.param=version2.0/true/13.5/true/8230/1.0/2050/0.55
bluetooth.chip.vendor=qcom
bluetooth.pan=true
persist.service.btui.use_aptx=1
ro.sdcrypto.syscall=378
ro.lge.b2b.vmware=true
service.knockcode.touchfw=0
ro.lge.capp_ZDi_O=true
lge.zdi.actionsend=false
lge.zdi.onactivityresult=true
lge.zdi.dragdropintent=false
ro.lge.capp_almond=true
ro.lge.capp_wfd=true
ro.lge.qslide.max_window=2
ro.lge.irrc.type=sw
ro.com.google.clientidbase=android-om-lge
ro.com.google.clientidbase.ms=android-om-lge
ro.com.google.clientidbase.am=android-om-lge
ro.com.google.clientidbase.gmm=android-om-lge
ro.com.google.clientidbase.yt=android-om-lge
ro.com.google.gmsversion=4.4.2_r1
ro.setupwizard.mode=DISABLED
ro.livewallpaper.map=DISABLED
ro.com.google.apphider=on
persist.sys.dalvik.vm.lib=libdvm.so
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x0
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
File is corrupt, it won't even let me copy it to my G Pad. Downloaded twice from different mirrors.
bobby-c said:
File is corrupt, it won't even let me copy it to my G Pad. Downloaded twice from different mirrors.
Click to expand...
Click to collapse
Bah.. ok i guess it got corrupt while uploading. I'll re-up it
Sent from my VS980 4G using Tapatalk
Is it ready? So OP this is the version u r running?
Sent from my LG-V500 using Tapatalk
fgcchevy said:
Is it ready? So OP this is the version u r running?
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Yep I'm running this version and it's great.
My upload to AndroidFileHost has dropped twice , so im uploading a copy to Mega.co.nz. It's at ~35% now... I'll update the OP when it's finished.
Sent from my VS980 4G using Tapatalk
So the GB version is a lot better than the US? I just installed the US version and so far it seems ok. Thanks a lot for doing all the work on the GPads :good:
Just need q voice. Would live not too have tip download the gb. Version just to get that.
Sent from my LG-V500 using Tapatalk
Canadoc said:
Just need q voice. Would live not too have tip download the gb. Version just to get that.
Sent from my LG-V500 using Tapatalk
Click to expand...
Click to collapse
Same here. Just got the other version like 2 hours ago and everything is fine. A flashable zip of the extra apps would be greatly appreciated.
New link up.. hosted on Mega. Attempting to upload to AFH again..
Sent from my VS980 4G using Tapatalk
edit:
AndroidFileHost link up now... md5 checks out so seems to have uploaded correctly this time.
id10terror said:
New link up.. hosted on Mega. Attempting to upload to AFH again..
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
Okay, this one copies fine to my G Pad. Installing and running KitKat now. Thanks for your hard work!
All down
Thanks, I upgraded successfully from 50018A to 50020A and my serial is back too! I downloaded it from mega.
Can someone, who downloaded the good file, upload it to somewhere plz?
Downloaded this from AFH. Works nice, but the kernel could use the gamma tweak. You can update all the lg apps after you flash. I like the fact that fbreader now uses the full screen.
When I try the AFH link in the OP it goes to Mega. Here is the correct AFH link:
http://www.androidfilehost.com/?fid=23329332407584360
Morning guys... Does anyone tried to restore apps and data from LG Backup app, after clean install of this 4.4.2?
Sent using Mixed Theme from omegadroid.co
Thanks id10terror for this rom! Simply amazing just a question: i can t access twrp recovery anymore... is it safe to flash aboot+recovery zip that you posted in the korean build thread?
MSephiroth said:
Thanks id10terror for this rom! Simply amazing just a question: i can t access twrp recovery anymore... is it safe to flash aboot+recovery zip that you posted in the korean build thread?
Click to expand...
Click to collapse
Do you still have root? I wanted to restore some apps, but Titanium Backup keeps saying "asking for root rights", so I downloaded rootchecker and now it tells me I don't have root access :/
Hello,
I upgraded from 4.2.2 to 4.4 ,official with LGMobile Support Tool. I had an error with meteo widget stock and i fixed after i installed the US version of this(I have a romanian EU version).Before install the ZIP ROM(US version) i Rooted and install the TP recovery thanks to the great OP on this big forum. Now everything is ok an my tablet is runing very smoot.
Thanks,
Bogdan.
Related
Exactly what the title suggests, will the s4 be able to spoof as the Moto X for ingress for the new weapon? And will it be possible to only spoof that app? And what kind of harm can come of this?
Edit:.. I meant to say the new Droid ultra/maxx/Mini one of those should work.
Sent from my SCH-I545 using xda premium
remember how quick they made the galaxy photosphere camera work without hacking the build prop? this should be a couple days tops. I heard that only the motorolas can get the new bursters from hacks. but all can fire plus they will probably be dropped from codes like all the new mods.
xM Minton Mx said:
Exactly what the title suggests, will the s4 be able to spoof as the Moto X for ingress for the new weapon? And will it be possible to only spoof that app? And what kind of arm can come of this?
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
If we could get a hold of the build.prop from the Moto X, we could copy the ro.product.brand, ro.product.name, and ro.product.device information, that would probably work. :good:
Here's the build prop from the Moto X:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=13.9.0Q2.X-116-X-17-51
ro.build.display.id=13.9.0Q2.X-116-X-17-51
ro.build.version.incremental=12
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sat Jul 20 14:18:07 CDT 2013
ro.build.date.utc=1374347887
ro.build.type=user
ro.build.user=hudsoncm
ro.build.host=il93lnxdroid79
ro.build.tags=bldacfg,release-keys
ro.product.model=XT1058
ro.product.brand=motorola
ro.product.name=ghost_att
ro.product.device=ghost
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ghost
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=ghost_att-user 4.2.2 13.9.0Q2.X-116-X-17-51 12 bldacfg,release-keys
ro.build.fingerprint=motorola/ghost_att/ghost:4.2.2/13.9.0Q2.X-116-X-17-51/12:user/bldacfg,release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# system.prop for Motorola MSM8960 devices - generic to all
# Add device-specific or carrier-specific changes to PRODUCT_PROPERTY_OVERRIDES.
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
debug.sf.no_hw_vsync=0
debug.enabletr=0
hw.trueMirrorSupported=1
#
# system props for the cne module
#
persist.cne.feature=0
# persist.cne.bat.range.low.med=30
# persist.cne.bat.range.med.high=60
# persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
# persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
# persist.cne.bwbased.rat.sel=false
# persist.cne.snsr.based.rat.mgt=false
# persist.cne.bat.based.rat.mgt=false
# persist.cne.rat.acq.time.out=30000
# persist.cne.rat.acq.retry.tout=0
lpa.decode=true
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
ro.config.vc_call_vol_steps=7
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 131072 is decimal for 0x20000 to report version 2
ro.opengles.version=131072
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
# Simulate sdcard on /data/media
#
persist.bind_sdcard=true
ro.crypto.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=true
#
# Gps Smart Battery Savings (depends on sensor hub)
#
persist.mot.gps.smart_battery=1
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=0
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#
# System prop for clientid per GMS Integration Instructions
#
ro.com.google.clientid=android-motorola
#
# System prop for legal URLs as per GMS integration Instructions
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
#
# Radio RIL properties applicable to all 8960 products
#
persist.radio.no_wait_for_card=1
persist.radio.call_type=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.dfr_mode_set=1
#
# Telephony FW properties
#
persist.radio.eons.enabled=1
# directory assistance number
ro.mot.ril.danlist=611,*611,#611
# For TCMD debug level
persist.tcmd.log.limit = 0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
# IKJBXLINE-6927
ro.mot.proximity.delay=300
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.build.version.full=Blur_Version.139.9.51.ghost_att.ATT.en.US
ro.mot.build.customerid=att
ro.mot.build.version.sdk_int=13
ro.mot.buildconfig=relcfg
ro.product.display=Moto X
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.2_r2
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.product.drm.sd.enable=0
ro.product.drm.cd.enable=0
ro.mot.noroamingicon=1
ro.config.ringtone=Moto.ogg
ro.config.notification_sound=Moto.ogg
ro.config.alarm_alert=Cesium.ogg
ro.bug2go.magickeys=
persist.log.aplogd.config=--collect=mrsek,--format=threadtime,--size=50,--seq,--ext,--backup=3
persist.sys.qc.sub.rstrtlvl=3
persist.sys.qc.sub.rdump.max=20
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.usb.mtp=0x2e62
ro.usb.mtp_adb=0x2e63
ro.usb.ptp=0x2e64
ro.usb.ptp_adb=0x2e65
ro.usb.bpt=0x2e28
ro.usb.bpt_adb=0x2e29
ro.usb.bpteth=0x2e2a
ro.usb.bpteth_adb=0x2e2b
ro.mot.ds.fastdormancy.disable=true
ro.mot.ds.fastdormancy.incall=false
ro.MAX_HIDDEN_APPS=42
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.mot.nfc.ce=2
ro.sf.lcd_density=320
ro.modem.no_wdog_chk=1
ro.mot.vr_source_dsp=1
keyguard.no_require_sim=true
ro.carrier=unknown
ro.partial.display=true
ro.media.enc.aud.fileformat=amr
ro.media.enc.aud.codec=amrnb
telephony.lteOnCdmaDevice=0
ro.telephony.default_network=9
ro.mot.phonemode.umts4gphone=1
net.early.sockets=0
ro.mot.wifi.hotspot=1
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/motomb886/Profile/motomb886.rdf
ro.build.config.version=GAS_NA_DINARAJATT_P001
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
drm.service.enabled=true
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
persist.gps.qc_force_agps=0
Here is the screenshot of xprivacy to which features ingress access in the area device identify
The entries with the exclamation mark in the triangle are which Ingress already accessed
Gesendet von meinem GT-I9300 mit Tapatalk 4
silentcovenant said:
If we could get a hold of the build.prop from the Moto X, we could copy the ro.product.brand, ro.product.name, and ro.product.device information, that would probably work. :good:
Click to expand...
Click to collapse
I replaced ro.product.brand, ro.product.name, and ro.product.device with information from one of the other released phones, and when launching ingress got a bonus intro package of gear for using the new Motorola device. So changing them does work.
I won't tell you which phone or what the values I changed them to are though, as technically it's cheating. I did just to see if it would work.
I'm still questioning the morality of using the ill-gotten items myself, may end up just recycling the items while at 100% XM and revert to my original build.prop.
Eggos said:
I replaced ro.product.brand, ro.product.name, and ro.product.device with information from one of the other released phones, and when launching ingress got a bonus intro package of gear for using the new Motorola device. So changing them does work.
I won't tell you which phone or what the values I changed them to are though, as technically it's cheating. I did just to see if it would work.
I'm still questioning the morality of using the ill-gotten items myself, may end up just recycling the items while at 100% XM and revert to my original build.prop.
Click to expand...
Click to collapse
Gee thanks..
Didn't work for me.
I wonder how the Google always listening feature works on the moto x? Is it just like some of our features where it barely works? Or is it straightforward? Would love to have that ported and run on our phone.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
And I think we need the droid ultra/maxx/Mini to get that. I know I said the wrong name. Currently haven't seen the forums show up yet.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Here's the XT1053 T-Mobile US/Unlocked/GSM Developer Edition Android 4.4.2 OTA package for anyone that needs/wants it. This updates you from system version 140.44.3.ghost_row.Retail.en.US (Android 4.4) to system version 161.44.25.ghost_row.Retail.en.US (Android 4.4.2).
Download (Mega)
Mirror (Thanks to cajunflavoredbob)
MD5: e3f387d1484f688fb5e89e917bbe75a9
Manual install instructions for unrooted stock users here.
For rooted stock users with unlocked bootloaders, read this first and make sure you really are back to stock. You need to have a completely stock system and kernel 140.44.3.ghost_row.Retail.en.US to proceed. No Xposed modules, modified build.prop, etc.
This update does not install with TWRP or at least Hashcode's build since his recovery reports it as a XT1060 and the update is looking for "ghost" so there's that. If you tried installing from the system notification and got yourself in a recovery bootloop, then wipe cache before rebooting.
The OTA just patches existing files and you should not lose root. Tested with Superuser 1.0.2.9 and SuperSU 1.89. In practice, you should be able to flash the stock recovery (zip attached to this post) from system with Recovery Tools, OTA, then flash TWRP back again with Recovery Tools when done.
If you rooted with SlapMyMoto and have a locked bootloader, up to you if you want to take this update. This turns write protection back on and you will be pretty much stuck if anything goes wrong.
You should be able to disable the OTA notification until you make up your mind of course of action. One of the 3c apps, not 100% which one, but try disabling 3c_ota.apk first. In adb shell it would be pm disable com.motorola.ccc.ota or use an app to freeze it. If you still get a notification also look at 3c_notification.apk (com.motorola.ccc.notification). If someone would be so kind as to confirm this, I will update the OP.
K
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KXA20.16-1.25
ro.build.display.id=KXA20.16-1.25
ro.build.version.incremental=31
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Fri Jan 10 22:11:02 CST 2014
ro.build.date.utc=1389413462
ro.build.type=user
ro.build.user=hudsoncm
ro.build.host=ilclbld34
ro.build.tags=release-keys
ro.product.model=XT1053
ro.product.brand=motorola
ro.product.name=ghost_retail
ro.product.device=ghost
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=motorola
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=ghost
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=ghost_retail-user 4.4.2 KXA20.16-1.25 31 release-keys
ro.build.fingerprint=motorola/ghost_retail/ghost:4.4.2/KXA20.16-1.25/31:user/release-keys
ro.build.characteristics=nosdcard
# end build properties
#
# from device/moto/ghost/system.prop
#
#
# system.prop for Motorola MSM8960 devices - generic to all
# Add device-specific or carrier-specific changes to PRODUCT_PROPERTY_OVERRIDES.
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
debug.sf.no_hw_vsync=0
debug.enabletr=0
hw.trueMirrorSupported=1
telephony.lteOnCdmaDevice=1
#
# system props for the cne module
#
persist.cne.feature=0
# persist.cne.bat.range.low.med=30
# persist.cne.bat.range.med.high=60
# persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
# persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
# persist.cne.bwbased.rat.sel=false
# persist.cne.snsr.based.rat.mgt=false
# persist.cne.bat.based.rat.mgt=false
# persist.cne.rat.acq.time.out=30000
# persist.cne.rat.acq.retry.tout=0
lpa.decode=false
lpa.use-stagefright=true
# IKJBMR2X-72 not default to QC HW AAC encoder
#qcom.hw.aac.encoder=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
#33395 is sum of supported format flags in AAL
#Formats: AVI AC3 ASF AAC QCP DTS 3G2
mm.enable.qcom_parser=33395
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.lowlatency.rec=false
ro.config.vc_call_vol_steps=7
# System prop to select audio resampler quality
af.resampler.quality=255
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
#
# Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
ro.crypto.fuse_sdcard=true
ro.hwui.text_cache_width=2048
#
# Supports warmboot capabilities
#
ro.warmboot.capability=1
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=false
#
# system property for Bluetooth hci transport
#
ro.qualcomm.bt.hci_transport=smd
#
# system property for Bluetooth HFP version
#
ro.bluetooth.hfp.ver=1.6
#
# system property for Bluetooth SAP support
# Motorola disabled SAP
#
ro.qualcomm.bluetooth.sap=false
# Bluetooth LE power class
qcom.bt.le_dev_pwr_class=1
#
# Gps Smart Battery Savings (depends on sensor hub)
#
persist.mot.gps.smart_battery=1
#property to check if dynamic resolution change is supported in framework
ro.streaming.video.drs=true
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
#
# System prop for clientid per GMS Integration Instructions
#
ro.com.google.clientid=android-motorola
#
# System prop for legal URLs as per GMS integration Instructions
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
#
# Radio RIL properties applicable to all 8960 products
#
persist.radio.no_wait_for_card=1
persist.radio.call_type=1
persist.radio.apm_sim_not_pwdn=1
persist.radio.dfr_mode_set=1
#
# Telephony FW properties
#
persist.radio.eons.enabled=1
# directory assistance number
ro.mot.ril.danlist=611,*611,#611
# For TCMD debug level
persist.tcmd.log.limit = 0
#system prop for setting rmnet mux mode
persist.rmnet.mux=disabled
# IKJBXLINE-6927
ro.mot.proximity.delay=300
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.build.version.full=Blur_Version.161.44.25.ghost_row.Retail.en.US
ro.mot.build.customerid=Retail
ro.mot.build.version.sdk_int=19
ro.product.display=Moto X
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4.2_r1
ro.mot.hw.uaprof=http://uaprof.motorola.com/phoneconfig/motomb886/Profile/motomb886.rdf
ro.telephony.default_network=9
net.early.sockets=0
telephony.lteOnCdmaDevice=0
ro.com.google.clientidbase=android-motorola
ro.com.google.clientidbase.ms=android-motorola
ro.com.google.clientidbase.am=android-motorola
ro.com.google.clientidbase.gmm=android-motorola
ro.com.google.clientidbase.yt=android-motorola
ro.config.ringtone=Moto.ogg
ro.config.notification_sound=Moto.ogg
ro.config.alarm_alert=Cesium.ogg
ro.bug2go.magickeys=
persist.log.aplogd.config=--collect=mrsek,--format=threadtime,--size=50,--seq,--ext,--backup=3
persist.sys.qc.sub.rstrtlvl=3
persist.sys.qc.sub.rdump.max=3
ro.vendor.extension_library=/system/lib/libqc-opt.so
ro.usb.mtp=0x2e62
ro.usb.mtp_adb=0x2e63
ro.usb.ptp=0x2e64
ro.usb.ptp_adb=0x2e65
ro.usb.bpt=0x2e28
ro.usb.bpt_adb=0x2e29
ro.usb.bpteth=0x2e2a
ro.usb.bpteth_adb=0x2e2b
ro.mot.ds.fastdormancy.disable=true
ro.mot.ds.fastdormancy.incall=false
ro.adb.secure=1
ro.MAX_HIDDEN_APPS=42
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.mot.nfc.ce=2
ro.sf.lcd_density=320
ro.modem.no_wdog_chk=1
ro.mot.vr_source_dsp=1
keyguard.no_require_sim=true
ro.zygote.capsuid=0
mdc_initial_max_retry=10
persist.radio.apn_delay=5000
drm.service.enabled=true
ro.carrier=unknown
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.partial.display=true
ro.media.enc.aud.fileformat=amr
ro.media.enc.aud.codec=amrnb
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
ro.qc.sdk.izat.service_mask=0x4
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
nice job Kev
kpetrie77 said:
Here's the T-Mobile/Unlocked/Developer Edition Android 4.4.2 OTA package for anyone that needs/wants it.
https://mega.co.nz/#!mwR2QC7C!s1GukqBXnBU1tUBKajDdzWXYGOFbjL80t-uX_Ds8a8k
Manual install instructions for unrooted stock users here.
K
Click to expand...
Click to collapse
THank you so much man!
munchy_cool said:
nice job Kev
Click to expand...
Click to collapse
Anyone got a checksum? Not keen on flashing a file without one
Can this be flashed by twrp? Or is it required to unroot prior to installing this? Thanks!
Sent from my XT1053 using Tapatalk 2
Should be able to. I fastbooted stock recovery but kept root through the update.
MD5 and build.prop added to the OP.
Sent from my fastboot oem unlock XT1053
I have an xt1053 in mexico can i do it with twrp? Or i need to do it with rsd?
Enviado desde mi XT1053 mediante Tapatalk
mazubo said:
Can this be flashed by twrp? Or is it required to unroot prior to installing this? Thanks!
Click to expand...
Click to collapse
gskelter said:
I have an xt1053 in mexico can i do it with twrp? Or i need to do it with rsd?
Click to expand...
Click to collapse
One of you will need to try TWRP. If it doesn't work, it will fail right from the start. Report back with TWRP version as well please.
Edit: Flashing with TWRP may bootloop back into TWRP. OP updated.
Ok i will try twrp but do not have a computer at this moment i hope everythig works fine heheh
Enviado desde mi XT1053 mediante Tapatalk
FYI, those with LOCKED bootloader with SlapmyMoto and Root will be fine if you take the update with the instructions above. Just finished it an hour ago, and phone is functioning appropriately.
Kenichi
Wierd... I get no data with this... which doesn't make sense as I have T-Mobile Moto X. Anyone have a solution? Tried reflashing... was hoping to use the new radios.
Jayrod1980 said:
Wierd... I get no data with this... which doesn't make sense as I have T-Mobile Moto X. Anyone have a solution? Tried reflashing... was hoping to use the new radios.
Click to expand...
Click to collapse
Odd. I assume you didn't change your APNs of any sort. You sure you didn't disable your data syncing or have a software data cap on yourself?
mazubo said:
Can this be flashed by twrp? Or is it required to unroot prior to installing this? Thanks!
Sent from my XT1053 using Tapatalk 2
Click to expand...
Click to collapse
NO this can only be flashed via stock recovery and will only work on a fully stock system and boot. REMEMBER, that if your bootloader is locked you will not be able to downgrade from this build, trying to do so may result in your device becoming a paper weight.
Kenichi said:
Odd. I assume you didn't change your APNs of any sort. You sure you didn't disable your data syncing or have a software data cap on yourself?
Click to expand...
Click to collapse
I'm a complete moron. I didn't pay attention and flashed the whole GB build. This was just a recovery update flash, not a full firmware. I had to reflash the TMO retail 4.4 build minus the gpt.bin and motoboot.img. Thank God the patch works with a 4.4.2 GB bootloader (though lower build than the North America bootloader). Hopefully this fixes some things!
jimmydafish said:
NO this can only be flashed via stock recovery and will only work on a fully stock system and boot. REMEMBER, that if your bootloader is locked you will not be able to downgrade from this build, trying to do so may result in your device becoming a paper weight.
Click to expand...
Click to collapse
It applies also to unlocked bootloader as well,this is a one way upgrade if you upgrade to this boot loader 30.B4, you can not downgrade, trust me and be warned, its been confirmed
Please only flash the system modem files a boot.img files
Sent on my Gummy running Lenoto X
Anyone else seeing an Adam.apk on their X? Don't recall seeing it before applying this update and searching for it doesn't turn anything up.
I would delete Adam.apk
Sent from my XT1053 using Tapatalk
---------- Post added at 09:58 AM ---------- Previous post was at 09:58 AM ----------
https://plus.google.com/105958707362743598012/posts/6dNzjDeNHMt
Sent from my XT1053 using Tapatalk
papi92 said:
I would delete Adam.apk
Sent from my XT1053 using Tapatalk
---------- Post added at 09:58 AM ---------- Previous post was at 09:58 AM ----------
https://plus.google.com/105958707362743598012/posts/6dNzjDeNHMt
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
link doesn't work for me
munchy_cool said:
link doesn't work for me
Click to expand...
Click to collapse
Me either. What is Adam.apk?
Its a new apk inside the 4.4.2 /system ..
Sent from my Nexus 5 using Tapatalk
Here is the OTA update zip for the GPE 4.4.3 Update. This is NOT a full rom and is only the OTA Zip
Link: http://www.androidfilehost.com/?fid=23501681358542459
build.prop
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Mon May 12 11:10:10 CEST 2014
ro.build.date.utc=1399885810
ro.build.user=BuildUser
ro.build.host=BuildHost
##### Final patch of properties #####
ro.build.product=C6806
ro.build.description=C6806-user 4.4.3 KTU84L.S1 3056 test-keys
ro.product.brand=Sony
ro.product.name=C6806_GPe
ro.product.device=C6806
ro.product.model=C6806_GPe
ro.build.tags=release-keys
ro.build.display.id=KTU84L.S1.3056 release-keys
ro.build.fingerprint=Sony/C6806_GPe/C6806:4.4.3/KTU84L.S1/3056:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1278-8069
ro.semc.version.cust_revision=R3C
ro.somc.customerid=8930
#############################################################################
################# Updating of the SW Version #################
ro.semc.version.fs_revision=KTU84L.S1.3056
##### Values from product package metadata #####
ro.semc.product.model=C6806
ro.semc.ms_type_id=PM-0430-BV
ro.semc.version.fs=GOOGLE-LTE
ro.semc.product.name=Sony Z Ultra Google Play Edition
ro.semc.product.device=C68
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KTU84L.S1
ro.build.version.incremental=3056
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.3
ro.build.type=user
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Sony
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse ro.build.description or .fingerprint
ro.build.characteristics=default
# end build properties
#
# from device/qcom/msm8974/system.prop
#
#
# system.prop for msm8974
#
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.logs=0
debug.mdpcomp.4k2kSplit=true
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
persist.demo.hdmirotationlock=false
ro.hdmi.enable=true
persist.speaker.prot.enable=false
qcom.hw.aac.encoder=true
#
# system props for the cne module
#
persist.cne.feature=1
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
mm.enable.smoothstreaming=true
media.aac_51_output_enabled=true
#37491 is decimal sum of supported codecs in AAL
#codecs: AVI AC3 ASF AAC QCP DTS 3G2 MP2TS
mm.enable.qcom_parser=37491
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOLOGS 7:AllLOGS
vidc.debug.level=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
ro.data.large_tcp_window_size=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
# System property for cabl
ro.qualcomm.cabl=1
#
# System props for telephony
# System prop to turn on CdmaLTEPhone always
telephony.lteOnCdmaDevice=0
#
# System props for bluetooth
# System prop to turn on hfp client
#bluetooth.hfp.client=1
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
persist.audio.fluence.voicecall=true
persist.audio.fluence.voicerec=false
persist.audio.fluence.speaker=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.camera.facialproc=false
# system prop for NFC DT
ro.nfc.port=I2C
#property to enable user to access Google WFD settings.
persist.debug.wfd.enable=1
#property to choose between virtual/external wfd display
persist.sys.wfd.virtual=0
tunnel.audio.encode = true
#use VERY_HIGH_QUALITY for audio resampler
af.resampler.quality=4
#Buffer size in kbytes for compress offload playback
audio.offload.buffer.size.kb=32
#Disable offload audio video playback by default
av.offload.enable=false
#enable voice path for PCM VoIP by default
use.voice.path.for.pcm.voip=true
#disable dsp gapless mode by default
audio.offload.gapless.enabled=false
#
# from device/somc/rhine/system.prop
#
#
# platform specific part of system.prop
#
#System prop for gralloc
persist.gralloc.cp.level3=0
#System props for audio
persist.audio.hp=true
#System props for the MM Audio
media.aac_51_output_enabled=true
# system property for somc thermal solution
ro.somc.thermal=system_monitor
# Enables two core touch boost
sys.somc.touch_perf_kick=1
#System props for the MM modules
encoder.video.profile=high
# aDSP sensors
ro.qualcomm.sensors.qmd=true
debug.qualcomm.sns.hal=w
ro.qc.sdk.sensors.gestures=false
ro.qc.sensors.max_accel_rate=false
ro.qc.sensors.max_gyro_rate=false
ro.qc.sensors.max_mag_rate=false
ro.qc.sensors.smgr_mag_cal_en=true
ro.qualcomm.sensors.pedometer=false
ro.qc.sensors.step_counter=true
ro.qc.sensors.step_detector=true
ro.qualcomm.sensors.pam=false
ro.qualcomm.sensors.scrn_ortn=false
ro.qualcomm.sensors.georv=true
ro.qualcomm.sensors.smd=sony
# Do not use mdp composition for more than 3 pipes
debug.mdpcomp.maxpermixer=3
# Disable mixed mode
debug.mdpcomp.mixedmode.disable=1
# Modem power save enabled
persist.radio.add_power_save=1
#
# from device/somc/togari/system.prop
#
#
# product specific part of system.prop
#
ro.usb.pid_suffix=1B6
# NFC
ro.nfc.on.default=true
ro.nfc.se.sim.enable=true
ro.nfc.se.smx.enable=false
ro.nfc.icon.enable=false
ro.config.ringtone=Titania.ogg
ro.config.notification_sound=Tethys.ogg
ro.config.alarm_alert=Oxygen.ogg
# Telephony
ro.telephony.default_network=9
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dataroaming=false
persist.sys.logkit.ctrlcode=0
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
persist.radio.apm_sim_not_pwdn=1
ro.com.google.clientidbase=android-google
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4.3_r1
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=512k
dalvik.vm.heapmaxfree=8m
ro.sf.lcd_density=400
ro.hwui.texture_cache_size=48
ro.hwui.layer_cache_size=32
ro.hwui.r_buffer_cache_size=4
ro.hwui.path_cache_size=24
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=5
ro.hwui.texture_cache_flushrate=0.5
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
persist.sys.dalvik.vm.lib=libdvm.so
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.service.swiqi3.supported=true
persist.service.swiqi3.enable=1
ro.drm.active.num=7
ro.drm.active.0=marlin,1
ro.drm.active.1=playready,1
ro.drm.active.2=dtla,1
ro.drm.active.3=marlin_import,1
ro.drm.active.4=ckb,1
ro.drm.active.5=widevine,1
ro.drm.active.6=dcp,1
ro.sony.fota.encrypteddata=supported
reserved just because
Hey thanks. If I have a rooted GPe can I just flash this?
Sent from my C6806_GPe using Tapatalk
texaspledge said:
Hey thanks. If I have a rooted GPe can I just flash this?
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
I sideloaded it and made sure I had selected Survival mode in SuperSU before I flashed it. You can be rooted but no system files could have been removed/modded. I mean if anything in the system has been changed it will fail. Things can be added but nothing from the original system can be removed/altered
Thanks a lot for capturing this
2 questions here:
1. Is there a changelog we can see to know the changes in this fix release?
2. I'm running stock 4.4.2 un-rooted, how do I flash this update? (sorry I'm a newbie to this specific device)
vivalamoza said:
Thanks a lot for capturing this
2 questions here:
1. Is there a changelog we can see to know the changes in this fix release?
2. I'm running stock 4.4.2 un-rooted, how do I flash this update? (sorry I'm a newbie to this specific device)
Click to expand...
Click to collapse
There are 7454 changes made between 4.4.2 and 4.4.3, so... good luck with that
Android Police is probably going through it now, and I guess they'll post about the biggest changes when they're done (in a year or three I guess)
http://www.androidpolice.com/2014/0...es-between-4-4-2-kot49h-through-4-4-3-ktu84l/
Sent from my C6806_GPe using Tapatalk
Tried to sideload the package got the following error message:
file_getprop: malformed line "0No #### Merging of the /util/data/semc_kernel_time_stamp.prop file ####" /system/build.prop not a prop file?
E:Error in /tmp/update.zip
(Status 7)
Installation aborted...
It'd be nice to see this just holistically packaged into a base 4.4.3 ROM, for those of us that have modified the /system partition.
this could be useful
http://forum.xda-developers.com/showthread.php?t=2773835
hey if someone gets the FULL ROM OTA please share it asap... i was messing around with the ROMs and ways to flash and i messed things up so ROM on my phone is broken
@OP
can u disk dump the system image? and upload it?
you can use the command:
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/system of=/data/media/0/system_dump.img
you can do this by hotbooting my recovery kernel:
Code:
fastboot boot boot.img
then mounting the /system & /data partitions and then do the system partition dump
*cough* @graffixnyc
Sent from my C6806_GPe using Tapatalk
DooMLoRD said:
@OP
can u disk dump the system image? and upload it?
you can use the command:
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/system of=/data/media/0/system_dump.img
you can do this by hotbooting my recovery kernel:
Code:
fastboot boot boot.img
then mounting the /system & /data partitions and then do the system partition dump
Click to expand...
Click to collapse
Yeah, I won't be able to until I get home from class though at around 9pm EST. My system is already rooted and I' very familiar with the dd command You just want the system image?
graffixnyc said:
Yeah, I won't be able to until I get home from class though at around 9pm EST. My system is already rooted and I' very familiar with the dd command You just want the system image?
Click to expand...
Click to collapse
Yes just the system image is enough
Sent from my D6503 using XDA Free mobile app
DooMLoRD said:
Yes just the system image is enough
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
OK, as soon as I get home I'll get it for ya
Sent from my OnePlus One using Tapatalk
Okay, so I guess the OTA is rolling out now. It should happen now people. Sorry to bother you again, for the fortytwelfth time @DooMLoRD, but could you hit the update button? Also, i find the lack of activity in this forum (ZU forum in general) scary low. There's been like under 10 posts today in this whole sub-forum.
We're here!!! Just been busy today
Sent from my C6806_GPe using Tapatalk
DooMLoRD said:
@OP
can u disk dump the system image? and upload it?
you can use the command:
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/system of=/data/media/0/system_dump.img
you can do this by hotbooting my recovery kernel:
Code:
fastboot boot boot.img
then mounting the /system & /data partitions and then do the system partition dump
Click to expand...
Click to collapse
I have the update it is a 154MB zip and am trying to upload it to my Box account. After that I am willing to restore to stock, flash update then pull what you need. I will require some instruction for mounting system and data. Awaiting your command.
Edit... Here is zip if it helpful (think i seen 89MB mentioned for another upload?) https://app.box.com/s/xj64bp19t79o0enpuxo4
Nice! I'm flashing it now!
Just kidding! I'll eagerly wait for the full ROM, which I guess isn't that far away (I hope)
Sent from my C6806_GPe using Tapatalk
LordManhattan said:
Nice! I'm flashing it now!
Just kidding! I'll eagerly wait for the full ROM, which I guess isn't that far away (I hope)
Sent from my C6806_GPe using Tapatalk
Click to expand...
Click to collapse
Waiting impatiently with you as well
Sent from my C6806_GPe using XDA Premium HD app
hello brothers,
i purchase new phone its work on only one sim i need any other firmware for my phone kindly tell me or suggest me any other firmware.
build prompt file here.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JLS36C
ro.build.display.id=EMS_UF2021_0.0.4
ro.build.version.incremental=eng.android.20140717.210438
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Thu Jul 17 21:06:25 CST 2014
ro.build.date.utc=1405602385
ro.build.type=user
ro.build.tags=release-keys
ro.product.model=UF2021
ro.product.brand=Ufone_Smart_U5
ro.product.name=I3S_EMS
ro.product.device=I3S_EMS
ro.build.host=android
ro.build.fingerprint=Ufone_Smart_U5/I3S_EMS/I3S_EMS:4.3/JLS36C/eng.android.20140717.210438:user/release-keys
ro.build.user=android
ro.product.board=MSM8610
ro.product.cpu.abi=armeabi-v7a
ro.product.phonestorage.name=Internal SD
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=EMS
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8610
# ro.build.product is obsolete; use ro.product.device
ro.build.product=I3S_EMS
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=I3S_EMS-user 4.3 JLS36C eng.android.20140717.210438 release-keys
ro.build.characteristics=default
# end build properties
#
# system.prop for msm8610
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
persist.radio.atfwd.start=false
# Start in cdma mode
# ro.telephony.default_network=5
# Start in wcdma preferred mode, zxb 20140118
ro.telephony.default_network=0
#
# system props for the cne module
#
persist.cne.feature=4
# system prop for override memlimit to enable cne
persist.cne.override.memlimit=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.composition.type=dyn
debug.gralloc.map_fb_memory=0
debug.hwc.dynThreshold=1.5
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
ro.hdmi.enable=true
tunnel.decode=false
#8x10 does not support tunnel av playback
#this prop should be set to false all the time
tunnel.audiovideo.decode=false
//lpa.decode=true
lpa.decode=false
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
mm.enable.qcom_parser=131071
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for widevine
#
persist.gralloc.cp.level3=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn off CdmaLTEPhone always, zxb 20140118
telephony.lteOnCdmaDevice=0
# simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for enabling the cdrom feature
#
persist.service.cdrom.enable=1
#
# System prop for default USB configuration
#
# add by lihuangbin for delete adb in 20140702
persist.sys.usb.config=diag,serial_smd,serial_tty,rmnet_bam,mass_storage
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
# Reduce Background apps limit
ro.sys.fw.bg_apps_limit=20
# System property for cabl
# modify by zhangdi 20131227 1-0
ro.qualcomm.cabl=0
# Enable Fast Dormancy 103
persist.env.fastdorm.enabled=true
#system props for restore modem_pref support
persist.radio.restore_mode_pref=1
#
# dirty ratio value when enable UMS
#
ro.sys.umsdirtyratio=20
# Enable RST packet drop
persist.data.tcp_rst_drop=true
# system prop for NFC DT
ro.nfc.port=I2C
#
#DASH video streaming
#Specify max allowed resolution/bandwidth for representations
#Set allowed avsync window during playback
#
persist.dash.max.rep.resolution=1280*720
persist.dash.max.rep.bandwidth=4000000
persist.dash.avsync.window.msec=100
tunnel.audio.encode = false
#add by zhangdi 20140314
wlan.ap.status = disconnected
#PPPOE config enable
#
ro.config.pppoe_enable=1
# system prop for storage test
ro.external.sd.path=/storage/sdcard1
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#Audio Resourcemanager exceptions
#by enabling following flag to true we support pcm camcorder recording
rm.audio.exceptions = false
# add by liuchunxu for csvt
persist.radio.calls.on.ims=true
persist.radio.jbims=1
persist.radio.csvt.enabled=true
persist.radio.VT_ENABLE=1
persist.radio.VT_HYBRID_ENABLE=1
# liuchunxu add
persist.env.c.phone.matchnum=7
#Begin add by gouyanhong
persist.sys.bootSound.enable=1
#add by hanjue
persist.camera.tintless=enable
persist.denoise.process.plates=0
persist.camera.aec.iso_preview=1
#Begin add by lihuangbin
#default timezone
persist.sys.timezone=Asia/Shanghai
#add by liangchongshang for logkit
persist.sys.logkit.ctrlcode=0
#add by wuqibing for signal sim
persist.radio.multisim.config=ssss
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.config.ringtone=Ufone_Ringtone.mp3
ro.config.notification_sound=Ufone_Notification_Tone.mp3
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
Many users are in search of this.
Sim Contact Service in set
I have the handset i found a service running by the name sim contacts i del it after rooting and get 10 to 15 mb ram free i think this service is stopping to other network sims after doing that other networks are shown in the network sim but still unable to connect but now it is showing the networks. now a senior member or developer can help all of us. hope others will help all the pak handset keeper
Waiting for the unlock code or custom firmware to buy this mobile
any Pakistani developer whats's the hold up???
kashifsaeed82 said:
hello brothers,
i purchase new phone its work on only one sim i need any other firmware for my phone kindly tell me or suggest me any other firmware.
build prompt file here.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JLS36C
ro.build.display.id=EMS_UF2021_0.0.4
ro.build.version.incremental=eng.android.20140717.210438
ro.build.version.sdk=18
ro.build.version.codename=REL
ro.build.version.release=4.3
ro.build.date=Thu Jul 17 21:06:25 CST 2014
ro.build.date.utc=1405602385
ro.build.type=user
ro.build.tags=release-keys
ro.product.model=UF2021
ro.product.brand=Ufone_Smart_U5
ro.product.name=I3S_EMS
ro.product.device=I3S_EMS
ro.build.host=android
ro.build.fingerprint=Ufone_Smart_U5/I3S_EMS/I3S_EMS:4.3/JLS36C/eng.android.20140717.210438:user/release-keys
ro.build.user=android
ro.product.board=MSM8610
ro.product.cpu.abi=armeabi-v7a
ro.product.phonestorage.name=Internal SD
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=EMS
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8610
# ro.build.product is obsolete; use ro.product.device
ro.build.product=I3S_EMS
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=I3S_EMS-user 4.3 JLS36C eng.android.20140717.210438 release-keys
ro.build.characteristics=default
# end build properties
#
# system.prop for msm8610
#
# Use reference RIL for initial bringup
#rild.libpath=/system/lib/libreference-ril.so
rild.libpath=/vendor/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
persist.radio.msgtunnel.start=false
persist.radio.atfwd.start=false
# Start in cdma mode
# ro.telephony.default_network=5
# Start in wcdma preferred mode, zxb 20140118
ro.telephony.default_network=0
#
# system props for the cne module
#
persist.cne.feature=4
# system prop for override memlimit to enable cne
persist.cne.override.memlimit=1
# Skip /sys/power/wait_for_fb_* nodes and
# force FB to be always on
debug.sf.fb_always_on=1
debug.composition.type=dyn
debug.gralloc.map_fb_memory=0
debug.hwc.dynThreshold=1.5
dalvik.vm.heapsize=36m
dev.pm.dyn_samplingrate=1
ro.hdmi.enable=true
tunnel.decode=false
#8x10 does not support tunnel av playback
#this prop should be set to false all the time
tunnel.audiovideo.decode=false
//lpa.decode=true
lpa.decode=false
lpa.use-stagefright=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
media.aac_51_output_enabled=true
mm.enable.qcom_parser=131071
# VIDC: debug_levels
# 1:ERROR 2:HIGH 4:LOW 0:NOlogs 7:AllLogs
vidc.debug.level=1
#
# system props for widevine
#
persist.gralloc.cp.level3=1
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#
# System props for telephony
# System prop to turn off CdmaLTEPhone always, zxb 20140118
telephony.lteOnCdmaDevice=0
# simulate sdcard on /data/media
#
persist.fuse_sdcard=false
#
# System prop for enabling the cdrom feature
#
persist.service.cdrom.enable=1
#
# System prop for default USB configuration
#
# add by lihuangbin for delete adb in 20140702
persist.sys.usb.config=diag,serial_smd,serial_tty,rmnet_bam,mass_storage
#
#snapdragon value add features
#
ro.qc.sdk.audio.ssr=false
##fluencetype can be "fluence" or "fluencepro" or "none"
ro.qc.sdk.audio.fluencetype=none
# Reduce Background apps limit
ro.sys.fw.bg_apps_limit=20
# System property for cabl
# modify by zhangdi 20131227 1-0
ro.qualcomm.cabl=0
# Enable Fast Dormancy 103
persist.env.fastdorm.enabled=true
#system props for restore modem_pref support
persist.radio.restore_mode_pref=1
#
# dirty ratio value when enable UMS
#
ro.sys.umsdirtyratio=20
# Enable RST packet drop
persist.data.tcp_rst_drop=true
# system prop for NFC DT
ro.nfc.port=I2C
#
#DASH video streaming
#Specify max allowed resolution/bandwidth for representations
#Set allowed avsync window during playback
#
persist.dash.max.rep.resolution=1280*720
persist.dash.max.rep.bandwidth=4000000
persist.dash.avsync.window.msec=100
tunnel.audio.encode = false
#add by zhangdi 20140314
wlan.ap.status = disconnected
#PPPOE config enable
#
ro.config.pppoe_enable=1
# system prop for storage test
ro.external.sd.path=/storage/sdcard1
#
#System property for FM transmitter
#
ro.fm.transmitter=false
#Audio Resourcemanager exceptions
#by enabling following flag to true we support pcm camcorder recording
rm.audio.exceptions = false
# add by liuchunxu for csvt
persist.radio.calls.on.ims=true
persist.radio.jbims=1
persist.radio.csvt.enabled=true
persist.radio.VT_ENABLE=1
persist.radio.VT_HYBRID_ENABLE=1
# liuchunxu add
persist.env.c.phone.matchnum=7
#Begin add by gouyanhong
persist.sys.bootSound.enable=1
#add by hanjue
persist.camera.tintless=enable
persist.denoise.process.plates=0
persist.camera.aec.iso_preview=1
#Begin add by lihuangbin
#default timezone
persist.sys.timezone=Asia/Shanghai
#add by liangchongshang for logkit
persist.sys.logkit.ctrlcode=0
#add by wuqibing for signal sim
persist.radio.multisim.config=ssss
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dataroaming=false
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.config.ringtone=Ufone_Ringtone.mp3
ro.config.notification_sound=Ufone_Notification_Tone.mp3
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
Click to expand...
Click to collapse
Should i buy this phone?Is it good or what? Camera,battery,performance plz plz plz advise me
unlock ufone u5
unlock ufone u5 , i found that it is a phone of EMS B.Social.4 with dual sim but the sim 2 slot is hided under ufone stiker see link:
bephone dot com
and go to support link on this site and download b.social.4 PDF file
.
is mobile main 2 sim hai bhai ufone ne 2nd sim stiker k neeche chupa di hai.
---------- Post added at 04:25 AM ---------- Previous post was at 04:21 AM ----------
bbuddy786 said:
I have the handset i found a service running by the name sim contacts i del it after rooting and get 10 to 15 mb ram free i think this service is stopping to other network sims after doing that other networks are shown in the network sim but still unable to connect but now it is showing the networks. now a senior member or developer can help all of us. hope others will help all the pak handset keeper
Click to expand...
Click to collapse
ok
Firmware ka pata chala kia bhi. please help me to unlock this phone.
Thankyou.
u5
Yarr mobile kamall ka ha bus memory 512 ha
Aur agar unlock hoo to superb ...&....best for developers
1-1 said:
Yarr mobile kamall ka ha bus memory 512 ha
Aur agar unlock hoo to superb ...&....best for developers
Click to expand...
Click to collapse
i need help drivers nai mil rahae to run apps or install apps after developing in eclipse .. must need drivers to run app directly from laptop on phone
Please share the unlock method here
Sehrish_ali kia app ne ye mobile unlock kar kia kiya please share the unlock method here. Thankyou.
Farhan4u said:
Sehrish_ali kia app ne ye mobile unlock kar kia kiya please share the unlock method here. Thankyou.
Click to expand...
Click to collapse
what do u really mean by unlock mobile ?
Driver
Sehrish_ali said:
i need help drivers nai mil rahae to run apps or install apps after developing in eclipse .. must need drivers to run app directly from laptop on phone
Click to expand...
Click to collapse
If you have install sdk drivers are in android sdk folder (C:\....where ever you have downloaded......\android-sdk-windows\extras)
but these are sdk drivers for adb/fastboot.....you want to run apps from laptop ......... or install from laptop ?
mean not from play store......! If yes then .......go to ...setting/ about phone / build number
tap 7 times on build number ....then you will se developer option in settings ...go there
check verify apps over USB......
4 Step unlock Ufone u5 Easy
trying to find network sim unlock method for ufone smart u5 mobile plese help some one.
File efs/carrier not found
Hi farhan I am not finding FILE EFS/Carrier/hiddenmenu.where can I find it? I have root explorer installed in my u5.
KITKAT 4.4.4 Update from EMS Confirmation
Dear Friends
I have a news for all U5 smartphone holder that EMS will provide kitkat update on Dec 20 or before 20
I have confirmed from EMS personally roll out of update will began through EMS
But they will pick and deliver the handset from home and auto delivered through TCS to your home
Wrong method
Farhan bhai aap ka unlocking method samsung devices ka he na k ufone k liay
farhan4u said:
trying to find network sim unlock method for ufone smart u5 mobile plese help some one.
Click to expand...
Click to collapse
5 Step Unlock for Ufone Smart U5 Easy
Sorry not found.
not working
Farhan4u said:
Step 1: Root your phone using PagGamers .com method.
Step 2: Delete app "Sim Contacts" on the mobile.
Step 3: Search app "DroidGram Blade Unlock Free" on Google Play and Download it.
Step 4: Open this app click "NO" and then this app will give u your "network unlock code" (NCK) free
Write this code on any paper.
Step 5: Insert Other Network Sim Card turn On the phone and
1. Type #7465625*638*CODE# (CODE is the unlock code App give you) Press the call button
or
2. Compose : #0111*CODE# (CODE is the unlock code App give you) Press the call button
Now Type *0141# and Press the call buttan. Now Your Mobile is activated for all networks
Done and enjoy :laugh:
Click to expand...
Click to collapse
Bro ap ka ye method kam ni kr RHA
---------- Post added at 11:08 AM ---------- Previous post was at 11:04 AM ----------
]Any one help me to unlock my U5 network.
Please wrong info na diya karain Farhan sahan
Farhan4u said:
Step 1: Root your phone using PagGamers .com method.
Step 2: Delete app "Sim Contacts" on the mobile.
Step 3: Search app "DroidGram Blade Unlock Free" on Google Play and Download it.
Step 4: Open this app click "NO" and then this app will give u your "network unlock code" (NCK) free
Write this code on any paper.
Step 5: Insert Other Network Sim Card turn On the phone and
1. Type #7465625*638*CODE# (CODE is the unlock code App give you) Press the call button
or
2. Compose : #0111*CODE# (CODE is the unlock code App give you) Press the call button
Now Type *0141# and Press the call buttan. Now Your Mobile is activated for all networks
Done and enjoy :laugh:
Click to expand...
Click to collapse
yar agar ap k pass u5 mobile nahi hy tu please aisay worng methods na post kiya karain. hamara time bhe waste hota hy aur banta kuch bhe nahi. ap ny iss say pehlay bhe aik method btaya tha. woh bhe fake tha..... next time please ap pehlay isay u5 mobile pr check kr k btana.
help me
sorry not found yet
New Step 5 method found
OK sorry bhai
Hi all i found a new Rom for our phone here: MOD edit links remvoed
I have downloaded it. Look to the build.prob:
ro.ril.oem.ecclist=112,911,110,119
ro.ril.hsdpa.category=24
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,23594,27202,27205
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=0
ro.ril.asia.tw.ecc.feature=1
ro.ril.enable.r8fd=1
ro.ril.disable.cpc=1
ro.ril.air.enabled=1
ro.ril.gsm.to.lte.blind.redir=1
ro.product.locale.language=zh
ro.product.locale.region=TW
ro.com.google.clientidbase=android-htc-rev
ro.product.model=HTC_One_max
ro.ril.enable.pre_r8fd=1
ro.ril.fd.pre_r8_tout.scr_off=2
ro.ril.fd.pre_r8_tout.scr_on=3
ro.ril.fd.r8_tout.scr_off=3
ro.ril.fd.r8_tout.scr_on=3
ro.ril.ltefgi=1578105984
ro.ril.pdpnumber.policy.roaming=3
ro.audio.enable_amrwb=1
dev.defaultwallpaper=/system/customize/resource/wallpapers_00.jpg
ro.installbysim=1
persist.wifi.offload=1
# begin build properties
# autogenerated by buildinfo.sh
htc.build.stage=2
ro.onecid=1
ro.aa.rid=146
ro.cwkey=HTC__621
ro.aa.skulist=709
ro.aa.customizationid=3017524
ro.aa.project=HIMA_UHL_L50_SENSE70
ro.aa.mainsku=709
ro.aa.romver=1.36.709.3
ro.aa.taskid=430882
ro.prot=true
ro.aa.maincid=HTC__621
ro.aa.modelid=0P3P52000
ro.aa.report=com
ro.aa.cidlist=HTC__621
ro.build.id=LRX22G
ro.build.display.id=LRX22G release-keys
ro.build.version.incremental=521287.3
ro.build.version.sdk=21
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=5.0.2
ro.build.date=一 4月 13 20:10:35 CST 2015
ro.build.date.utc=1428927035
ro.build.type=user
ro.build.user=buildteam
ro.build.host=ABM107
ro.build.tags=release-keys
ro.product.brand=htc
ro.product.name=htc_asia_tw
ro.product.device=t6ul
ro.product.board=
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=t6ul
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=1.36.709.3 CL521287 release-keys
ro.build.version.htc_sense=7.0 L Eye Experience
ro.build.fingerprint=htc/himauhl_htc_asia_tw/htc_himauhl:5.0.2/LRX22G/521287.3:user/release-keys
ro.build.characteristics=default
ro.build.description=1.36.709.3 CL521287 release-keys
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=1.36.709.3 CL521287 release-keys
ro.build.changelist=521287
ro.build.project=HIMA_UHL_L50_SENSE70:429003
ro.build.sku=HIMAUHL
ro.build.buildline=HIMAUHL_Asia_TW_L50_CRC_Sense70_Stable
ro.product.version=ViperOneM9 2.3.1
ro.build.languageremove=
ro.build.sense.version=7.0
keyguard.no_require_sim=1
ro.build.version.htcsdk=HTCExt:HTCExtension_HDKBase_19.3;SDK:1.0;hdkbase:19.3
# end build properties
#
# from device/htc/t6ul/system.prop
#
#
# system.prop for m7wl
#
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild_dsda.libpath=/system/lib/libril-qc-qmi-qsc.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
#
# system.prop for display
#
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=gpu
debug.enabletr=true
ro.hwui.renderer.disable_opaque=true
ro.sf.lcd_density=480
persist.hwc.mdpcomp.enable=true
debug.mdpcomp.maxlayer=3
debug.egl.buffcount=4
dalvik.vm.heapsize=512m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapmaxfree=8m
dalvik.vm.heapminfree=2m
dev.pm.dyn_samplingrate=1
#
# system props for the cne module
#
persist.cne.UseCne=vendor
persist.cne.UseSwim=false
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.sync.swim.mode=false
ro.hdmi.enable=true
lpa.decode=true
tunnel.decode=true
lpa.use-stagefright=true
lpa.releaselock=true
#system props for the MM modules
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
#
# system props for the data modules
#
ro.use_data_netmgrd=true
#system props for time-services
persist.timed.enable=true
# System props for audio
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
# System props for soundhound
# bit 0: Music playback in headset mode
# bit 1: FM 48K
persist.htc.audio.soundhound=1
# System prop to select audio resampler quality
af.resampler.quality=255
# System props for global effect
htc.audio.global.state=0
htc.audio.global.profile=0
htc.audio.q6.topology=0
htc.audio.global.speaker=1
# System props for inbox bundle headset info
persist.htc.audio.inbox.profile=max300_2vol_20130219
#
# system prop for opengles version
#
# 196608 is decimal for 0x30000 to report version 3
ro.opengles.version=196608
#system prop for switching gps driver to qmi
persist.gps.qmienabled=true
# System property for cabl
ro.qualcomm.cabl=0
#
# System prop for sending transmit power request to RIL during WiFi hotspot on/off
#
ro.ril.transmitpower=true
# Enable IMS service by default
persist.radio.jbims=1
# For workaround for ro.baseband property. QCT use the property same as radio version to determine the architecture.
# But we hard code to dsda for M7 DxG.
ro.baseband.arch = mdm
#Add default network type for phone reference
ro.telephony.default_network=9
#Support manual selection with rat by qualcomm interface.
ro.ril.scan.selection.rat = 1
#
#Simulate sdcard on /data/media
#
persist.fuse_sdcard=true
# ro.storage_structure: define the storage structure of this project
# FUSE: 0x8, FAT: 0x4, SD: 0x2, INS: 0x1
# Example: If the project has FUSE with SD card, the value should be defined as 10 (dec)
ro.storage_structure = 10
# M7 Hardware Info
ro.product.bluetooth=4.0
ro.product.display_resolution = 5.9 inch 1080p resolution
ro.product.main_camera = HTC UltraPixel Camera
ro.product.front_camera = 2.1M
ro.product.processor = Quadcore
ro.product.ram = 2GB
ro.product.wifi = 802.11 a/b/g/n/ac
#SSD_BT+ bluetooth
#
# system prop for bluetooth logcat/snoop enable
#
#bluetooth.hcidump.enabled=1
#
# system prop for Bluetooth Dialup Networking
#
ro.qualcomm.bluetooth.dun=false
# system prop for Bluetooth FTP profile
ro.qualcomm.bluetooth.ftp=true
#
# system property for Bluetooth Handsfree Profile Wide Band Speech
#
ro.qualcomm.bluetooth.hfp.wbs=false
#
#system prop for Bluetooth hci transport
ro.qualcomm.bt.hci_transport=smd
#
# system prop for requesting Master role in incoming Bluetooth connection.
#
ro.bluetooth.request.master=true
#
# system prop for Bluetooth Auto connect for remote initated connections
#
ro.bluetooth.remote.autoconnect=true
# system property for Bluetooth discoverability time out in seconds
# 0: Always discoverable
#debug.bt.discoverable_time=0
# system property for Bluetooth Hardware information
ro.product.bluetooth=4.0
# config fm rssi threshold
service.qct.fm.rssi=116
#SSD_BT- bluetooth
# BLE TAG (HtcBluetoothLeProfiles)
ro.bt.ble_tag = 1
# wifi
wifi.softap.interface=wlan0
wifi.softapconcurrent.interface=softap.0
wifi.miracastconcurrent.scan=WCN3680
init.svc.wpa_supplicant=
init.svc.dhcpcd_wlan0=
dhcp.wlan0.autoip=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.ooxx=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
net.wlan0.dns1=
net.wlan0.dns2=
wifi.wpa_supp_ready=
wlan.driver.status=
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
persist.wifi.v6=true
persist.wifi.v6.rs.count=5
persist.wifi.v6.rs.timeout=5
wifi.qca.oldframeworkltecoex=1
# Support HW reset
ro.sun.dream.sdk=21
ro.product.hwreset = 1
ro.hardware.power = htc
# For EXT4 file system
ro.ext4fs = 1
# support 3LM encryption
ro.3LM_SD_ENCRYPT = fasle
# ro.storage_encryption_type: define the storage encryption type of this project
# not support encryption: 0x0 block level: 0x1 file level: 0x2
ro.storage_encryption_type = 2
#For usb storage
ro.usb_host = 1
# Preloading common control assets
persist.preload.common=1
# Perflock for inter-process activity launch and first launch
persist.htc.multicore.timeout = 1500
# Perflock for Home process lock duration
persist.htc.multicore.home = 800
# Property for MPEG2TS playback
TSParser.disable.seek = 1
# T6 SGLTE set default network type GSM/WCDMA/LTE auto
persist.radio.prefer.network = 9
#
# ADDITIONAL_BUILD_PROPERTIES
#
debug.nfc.fw_download=true
debug.nfc.fw_boot_download=true
ro.carrier=unknown
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
drm.service.enabled=true
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=5.0_r2
ro.vendor.extension_library=libqti-perfd-client.so
persist.zygote.preload_threads=3
persist.camera.antibanding=60
persist.camera.tuning_spec=htc
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.preload.common=1
persist.zygote.preload_threads=3
persist.camera.antibanding=60
persist.camera.tuning_spec=htc
ro.com.android.dataroaming=false
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.features=div
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.sun.dream.version=S.ROM
# Enable 3 fingers swipe
ro.framework.gestureservice=1
# Venom OTA
ro.config.venom.enableCOTA=1
ro.config.venom.nocheckin=0
ro.config.venom.noappupdate=0
settings.fota.saveto=cache
# Venom HUB
ro.venom.support_kernel_change=true
ro.venom.internal_sdcard=true
Do i install this over another rom ?
2 lines of that build.prop make me think this is just sundreams s.rom modified.
"# Support HW reset
ro.sun.dream.sdk=21
And
"ro.sun.dream.version=S.ROM"
@ htcforo
Can U upload it somewhere because of this chinese site I can not download it.
Thanks in advance
Here mirror:
https://drive.google.com/file/d/0B0XLIFNHCOkdcURzMWtxcDhrSWc/view?usp=sharing
Dirty flashed it and i cant seem to find music widget
Hello
Link
Google Drive
I 'd link
http://htcui.com/7582.html
Here is the "Translated Version of that webpage.
ROM Summary:
ROM Author: xuexue2.0
Android Version: 5.0.2
Sense Version: Sense7 UI
kernel version: 3.4.0
HTC ONEMAX exchange group: 243 103 886
Supported models:
HTC OneMax International Edition
HTC OneMax Taiwan Edition
Hong Kong version of HTC OneMax
V2.0 update
Replace the bottom of the package the latest version 1.40.1405.8 sense7
Integrated into the system in one step patch
He joined the fingerprint identification
Details of the optimization system
Removing junk files
All HTC software update (desktop weather clock, etc.)
Optimization of power
The first one max snakes transplant system
Synchronization snakes update V3.1, adding new features
The status bar complete open China Sense (previous version status bar there is a problem, I forcibly shut down)
After the status bar to open China Sense, official comes the highlight bar is available to increase the brightness bar than a serpent's more beautiful, more reasonable, and does not conflict with the automatic brightness
All functions except snakes perfect transplant desktop (because the desktop resolution is wrong, so in exchange for the original desktop, so the main interface settings do not take effect serpent set)
Streamlining the large number of foreign unwanted software and system files
The default start-up screen comes to snakes
Complete Sense 7
Fixed wakeup problem, Wake normal
Support cpu down, down more power (in snakes toolbox inside setting)
Add CPU core control disables the kernel 1--7 (2 core currently lagging behind the free-running, should improve battery life that)
Repair and clean-up
Repair of FC VenomHUB when accessing account settings
Always show icon Murican repair data carriers
Fix some graphical glitches VenomHUB
Add color conversion NEQS switch
Add flashback during charging
Add custom motion attitude
Add LTE handover sidebar
White / blacklist fixed immersive mode
Improved fake Imei and more applications
Repair status bar and navbar using the previous color if the application is in the blacklist
Repair button labels if you use the Russian language fc
Default Open magic sound
Join Dolby sound
Added users, support tourist mode
System with xposed framework software, you can uninstall unused
The default theme for a foreign source, you need to download **
First boot a long time, and so like
Be sure to upgrade to brush the official 5.0
Ui stop running, that is, if you brush after phone built storage problem
Sense 7 Input patch download http://pan.baidu.com/s/1eQ3uIxs
Google Service Pack Download http://pan.baidu.com/s/1mgvc78W
Micro-channel and microblogging desktop plug patch download address http://pan.baidu.com/s/1gdxoGmv
Radio Patch Download http://pan.baidu.com/s/1qWHpiag
download link
System Download http://yun.baidu.com/share/link?shareid=425711081&uk=1713458938
Dolby Sound Download http://pan.baidu.com/s/1gdFBxqN
Screenshot
Some screen shot available?
e12ror said:
Some screen shot available?
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=521953&st=3340
Some screenshoots and link to download : https://yadi.sk/d/Jsj5EQ8MipQCg
Venom HUB problems
i you have venom hub account problems read this :
http://forum.xda-developers.com/showthread.php?t=2680161&page=3
Is this a full ROM or an overlay for Sense 7
htcforo said:
http://4pda.ru/forum/index.php?showtopic=521953&st=3340
Some screenshoots and link to download : https://yadi.sk/d/Jsj5EQ8MipQCg
Click to expand...
Click to collapse
627 MB for just some screen shots?
e12ror said:
627 mb for just some screen shots?
Click to expand...
Click to collapse
سلام میتونید اون ادرسی که من تو سایت گذاشتم لینک ازاد بذارید
---------- Post added at 10:30 AM ---------- Previous post was at 10:25 AM ----------
e12ror said:
627 MB for just some screen shots?
Click to expand...
Click to collapse
MOD Edit link removed
Moderator Information,
Thread has been closed, It is a kang of Venom roms.