hi guys. my i9300 is bricked. I tried to flash roms with odin.
it stucked at samsung gt-i9300 galaxy s3 text. no samsung logo.
Also I can't get in to recovery mode.
When i try to flash any rom (included stock rom) i get this error
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CheckROM_V4_LG8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried many of PIT files. Still the same error.
Sorry for my english
This belongs in q/a
Sent from my GT-I9300 using Tapatalk
Related
Hello i need some help recovering a Samsung galaxy S 2 GT-i9100
it is stuck in Boot mode (showing Only the Samsung galaxy s2 logo) soft bricked?
i tryed to fiddel with http://forum.xda-developers.com/showthread.php?t=1449771
but i am unabel to boot into "Download mode " the green dude is only showing for a moment and then it return to the SG logo....
Please advise
You won't be fixing it unless you get into download mode. Keep trying.
Emort said:
Hello i need some help recovering a Samsung galaxy S 2 GT-i9100
it is stuck in Boot mode (showing Only the Samsung galaxy s2 logo) soft bricked?
i tryed to fiddel with http://forum.xda-developers.com/showthread.php?t=1449771
but i am unabel to boot into "Download mode " the green dude is only showing for a moment and then it return to the SG logo....
Please advise
Click to expand...
Click to collapse
go to recovery and do full wipe and then check.
Now in Download mode but..
In odin i keep reciving
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_NEW_BOOTLOADER.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> Sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> zImage
[B]<ID:0/005> Complete(Write) operation failed.[/B]
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Picture:
emort.dk/odin3.png
all usb ports tried on 2 different PC's
3 different cables tried
any ideas?
Find Hopper8's 'Odin troubleshooting' thread & try the stuff in that thread/keep trying. In many cases these things are fixed by perseverance I.E the first 7 flashes dont work but the 8th works for whatever reason. Unless you'd rather take it to a Samsung service centre & explain how you broke it (and pay to have it fixed) ?
Emort said:
In odin i keep reciving
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100-CSC-MULTI-OXAKI3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-I9100_NEW_BOOTLOADER.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> Sbl.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> boot.bin
<ID:0/005> Sbl.bin
<ID:0/005> param.lfs
<ID:0/005> zImage
[B]<ID:0/005> Complete(Write) operation failed.[/B]
<OSM> All threads completed. (succeed 0 / failed 1)
Odin Picture:
emort.dk/odin3.png
all usb ports tried on 2 different PC's
3 different cables tried
any ideas?
Click to expand...
Click to collapse
The same thing happened to me on My Galaxy s1.
Un-install all samsung drivers
Install Samsung KIES
and update drivers in download mode
make sure to kill all kies task from Task manager
Try different Odin version
Try to flash older Version firmware like Ginger bread
...which is exactly what Hopper's thread says (among other things) & was the whole point of him putting that info together - so these things don't have to be regurgitated time & time again for every n00b who gets stuck/asks.
MistahBungle said:
...which is exactly what Hopper's thread says (among other things) & was the whole point of him putting that info together - so these things don't have to be regurgitated time & time again for every n00b who gets stuck/asks.
Click to expand...
Click to collapse
well tried all the possible soluton no luck.
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Try another version of odin, different lead, port or pc. Ensure kies is not running. Follow the guide on flashing to the letter.
Download the rom from sammobile and check the md5.
Sent from my GT-I9300 using Tapatalk
wicccked said:
Hi guys!
My i9300 does not boot and instead keeps displaying the samsung logo. It doesn't enter the recovery mode either, but does enter the download mode. So I tried flashing 2 different official ROMs but I'm getting the error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I downloaded the ROM here:
<tried posting a link but was not allowed>
Could you please help me with this problem?
Thanks in advance!
Click to expand...
Click to collapse
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
jaggythistle said:
I had a similar issue a while ago but it turned out to be an issue with the Kernel not being compatable with the Rom I flashed. I thought I had bricked it, until I flashed a stock kernal first then the stock ROM and it fixed it for me and it really does sound like you have the same issue, As for the rom not flashing its most likely a bad download try sammobile! let me know if it was the kernal!
Click to expand...
Click to collapse
jaggythistle, thank you for the answer.
I downloaded the stock kernel, successfully flashed it, downloaded the matching ROM (1-file this time), but now when trying to flash I'm getting the following error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH3_I9300UBEMH1_I9300ECOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
What can I do?
boomboomer, Thanks for the reply. I have checked it all, now I'm getting the above error.
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
boomboomer said:
If you've tried all the connection issues then it appears your recovery positron is corrupt and can't be written. A rescue firmware, including pit might help but otherwise you'll need a new motherboard.
Search in general forum for the rescue firmware thread, follow the instructions.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
I have tried the rescue firmware and got the following error:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9300XXEMG4_1314436_REV00_user_low_ship.tar.md5 is valid.
<OSM> CSC_I9300OXEEMH1_SER_FACTORY_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
JJEgan said:
PIT damaged new motherboard .
You can search for this thread where a claim was made to fix pit .
(SOLVED) PIT/Bricked/Dead problem on GT-I9300 international
Worth trying before buying a new motherboard as you have no warranty .
Click to expand...
Click to collapse
Tried it, Odin was hanging at the "Erase..." step for ~5-10 mins, then I got the error:
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Erase...
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
hello,
I just try my Tab2 also to flash. I get always the flash process via odin following message:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anybody help me?
Greetings Coldjack
coldjack said:
hello,
I just try my Tab2 also to flash. I get always the flash process via odin following message:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Can anybody help me?
Greetings Coldjack
Click to expand...
Click to collapse
It might be the same mistake I made when flashing my phone.. I didn't run Odin as administrator in win7. After I did run it as administrator the error was gone.
But.... I also had a similar error with bad files so it could be that too.
Sent from my GT-P7510 using XDA Free mobile app
Hi, l made it as Administrator.
And there comes the error.
Greetings coldjack
Hello.
I'm trying to reset the Samsung Galaxy S3.
When i start Odin, go into download mode on the S3 and plug it in, Odin detects it.
Now i tried to select a PDA file.
When i press Start, it says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300CHOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
(No PIT selected, Re-partition is unselected also)
Now when i try to select a PIT and do it again, it says:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300CHOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Could anyone tell me how to fix this issue?
I'm trying this because i can't boot up the phone anymore..it's stuck on the Samsung Galaxy screen
///EDIT
now its stuck here:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300CHOEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
You have to flash a firmware and a pit together at the same time, try the rescue firmware (search in general forum). If it still falls then emmc chip might be damaged, new motherboard/phone required.
Hi,
So I am having trouble downgrading my Samsung Galaxy S6 (SM-G920V) from Marshmallow 6.0.2 to Lollipop 5.0.2 so that I can run a Ping Pong Root on it. The trouble is coming from Odin when I try to flash my phone. It either gets stuck showing the code below and never moves on, or progresses past this and says that it has failed. My phone is definitely not bricked as I was tricked into thinking that the downgrade worked only to see that I just reloaded my same firmware after restoring the factory data minutes earlier. I am trying to flash it with SM-G920VVRU1AOE2 which I got from SamMobile.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920VVRU1AOE2_G920VVZW1AOE2_G920VVRU1AOE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I either get the result shown above, or the result shown below:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried restarting my computer and rerunning the USB Drivers, and 3 different formats of Odin (3.11.1, 3.10.07, and 3.10.06).
Does anybody have any idea what might be going wrong and how I can fix it so that I can get my phone working again?
Thanks.