Need Help - Galaxy S II Q&A, Help & Troubleshooting

Hello.
I have a samsung galaxy s2 and its been working fine for more than a year. Few days ago, i did a factory reset and now when I power on my phone it stays on the Samsung logo. If i go in recovery, it says CWM-based Recovery v6.0.1.2-Siyah. and i have a lot of options. I did wipe data/factory reset and after that completes it powers on and goes in safe mode, i can do stuff for around 30 seconds and then it restarts and stuck on samsung logo again.
I tried flashing stock firmware but Odin does not detect my phone. i have tried on two different computers, they both have the drivers everything, tried on different ports, tried with different cables.
Please Help.

what rom you're on?

HPTL7 said:
Please Help.
Click to expand...
Click to collapse
1) 'Please use a descriptive thread title'
2) Hopper8's 'Odin troubleshooting' thread stickied in General, find it, try as many of the things in that thread as many times as you need to in order to get a successful flash. If you try the stuff in the thread two or three times then come back to this thread & say 'I tried blah blah a few times & still the same', guess what ? Your phone will stay busted. Why ? Because perseverance always fixes these issues unless the phone isn't recoverable. You need to try everything in that thread over and over and over if necessary. There's nothing that isn't in that thread which can be suggested in these situations. Why ? That thread is the 'Bible'.
So...Go...You now have the tools to fix your phone.

i have already seen that thread and tried what it advised but to no avail.

TheImpossibleEnemy said:
what rom you're on?
Click to expand...
Click to collapse
Sorry, im noob at this. what do you mean by that?
this CWM-based Recovery v6.0.1.2-Siyah?

HPTL7 said:
Sorry, im noob at this. what do you mean by that?
this CWM-based Recovery v6.0.1.2-Siyah?
Click to expand...
Click to collapse
I mean phone's firmware,like stock jelly bean,custom rom like cyanogenmod for example.And what kernel you're running.

Not sure. can you tell me how to find out?
Thanks,

HPTL7 said:
Not sure. can you tell me how to find out?
Thanks,
Click to expand...
Click to collapse
go to settings/about phone

I can not get in to my phone.

HPTL7 said:
I can not get in to my phone.
Click to expand...
Click to collapse
you said it can boot for ~30 seconds
anyway,try booting to recovery:
1.do a factory reset again
2.wipe cache
3.advanced/wipe dalvik cache
4.advanced/fix permissions

TheImpossibleEnemy said:
what rom you're on?
Click to expand...
Click to collapse
TheImpossibleEnemy said:
you said it can boot for ~30 seconds
anyway,try booting to recovery:
1.do a factory reset again
2.wipe cache
3.advanced/wipe dalvik cache
4.advanced/fix permissions
Click to expand...
Click to collapse
Tried but did not work.
Same thing happens, goes into the system, and then restarts after 20-30 seconds and then stuck on samsung logo.

Well,if you can boot,quickly go to phone's settings,scroll down and tap "about phone".Write down android,firmware and kernel versions and post here.

That stuff is irrelevant. OP, you're clearly not doing some things here or not telling us exactly what you did to get the phone in that state (like most people who get into this situation). Service centre.

i said in my FIRST post that after i did a factory reset, when i restarted it got stuck on the samsung logo.

Anyone ?
Please.

Well,if your current rom is messed up and can't use ODIN,you may try flashing a stock based jb rom through recovery.Choose the one you like,follow the instructions and that's it.
Just a suggestion:angel:

Could you please link me to which one i should download. i do not want to mess my phone up even more.
im from uk.

HPTL7 said:
Could you please link me to which one i should download. i do not want to mess my phone up even more.
im from uk.
Click to expand...
Click to collapse
Well,I cannot say which rom you SHOULD try as it's against the rules and is purely your choice.Although I used this one some time ago and really liked it
forum.xda-developers.com/galaxy-s2/development-derivatives/rom-jb-xwms2-neatrom-lite-aroma-mods-t1569686
Just follow the instructions and you're done.

Right...So on one hand you say
TheImpossibleEnemy said:
Well,I cannot say which rom you SHOULD try as it's against the rules and is purely your choice
Click to expand...
Click to collapse
Which is absolutely correct.
And then you go and say
TheImpossibleEnemy said:
Although I used this one some time ago and really liked it
forum.xda-developers.com/galaxy-s2/development-derivatives/rom-jb-xwms2-neatrom-lite-aroma-mods-t1569686
Click to expand...
Click to collapse
What's the point in telling people what the rules are when you go and break them in the next sentence ? Why not just tell people to go read some rom threads & try some roms ? Do you realise how much more likely it is that a n00b will break their phone at some point in the fairly near future when you spoonfeed them everything, which is exactly what you've been doing for the past few weeks, as opposed to pointing them in the right direction & telling them to learn for themselves ?

MistahBungle said:
What's the point in telling people what the rules are when you go and break them in the next sentence ? Why not just tell people to go read some rom threads & try some roms ? Do you realise how much more likely it is that a n00b will break their phone at some point in the fairly near future when you spoonfeed them everything, which is exactly what you've been doing for the past few weeks, as opposed to pointing them in the right direction & telling them to learn for themselves ?
Click to expand...
Click to collapse
I don't get you mate.The man asked me to suggest a rom so I did.Honestly,it was the only stock jb based rom I ever tried as AOSP is my home.As much as I hate stock,I know that rom has little to no problems,so that OP won't come back here anytime soon.Which is good.Never wanted to break any rules,but because his phone was in unusable state,I pointed him to (IMHO) the right direction.Is this a bad HELP?
I know I did some things here and there that made some noobs lifes easier.So this means I should always reply by saying:
Hey,there's search button for that!DIY!Troubleshooting thread is not for these kind of questions.Get outta here!!
That's not how I understand HELP.
Anyway,thanks for your opinion,really respect that.

Related

previously rooted phone won't load past splash screen

I've had the phone for around 6 months, rooted it back in Feb or something.
Started having problems freezing and restarting a few weeks ago, has probably only done this only a handful of times, until this morning...
Phone locked up and restarted then started loading the splash screen directly after the samsung galaxy sII screen and got stuck in an infinite cycle. It doesn't vibrate when turned on and no buttons work the only means of turning it off when in the loop is pulling the battery.
I've searched this topic but all I can find are ppl that have un-rooted phones or ppl that just rooted their phones. I can get into recovery mode but don't know what to do after that... help!
oldblue05 said:
I've had the phone for around 6 months, rooted it back in Feb or something.
Started having problems freezing and restarting a few weeks ago, has probably only done this only a handful of times, until this morning...
Phone locked up and restarted then started loading the splash screen directly after the samsung galaxy sII screen and got stuck in an infinite cycle. It doesn't vibrate when turned on and no buttons work the only means of turning it off when in the loop is pulling the battery.
I've searched this topic but all I can find are ppl that have un-rooted phones or ppl that just rooted their phones. I can get into recovery mode but don't know what to do after that... help!
Click to expand...
Click to collapse
If you aren't on stock ics try a wipe
Sent from my SGH-I777
122ninjas said:
If you aren't on stock ics try a wipe
Sent from my SGH-I777
Click to expand...
Click to collapse
Could you elaborate on that?
oldblue05 said:
Could you elaborate on that?
Click to expand...
Click to collapse
Are you on the ics update that was sent over kies or are you on GB/rom
Sent from my SGH-I777
talk, benguie
I honestly don't know, I saw the update awhile back and wasn't on wifi so I didn't update it. Then heard on the offroad forum that I frequent that some were having problems with the update so I never actively seeked it out to install it and never saw it pop up again but I do update often so it automatically updates then most likely. I'm pretty savvy with electronics but don't really know any of the lingo yall use in these forums so please go light on it lol
oldblue05 said:
I honestly don't know, I saw the update awhile back and wasn't on wifi so I didn't update it. Then heard on the offroad forum that I frequent that some were having problems with the update so I never actively seeked it out to install it and never saw it pop up again but I do update often so it automatically updates then most likely. I'm pretty savvy with electronics but don't really know any of the lingo yall use in these forums so please go light on it lol
Click to expand...
Click to collapse
Hit about phone and tell me all the info please
Sent from my SGH-I777
miers CD Sura
I thought I listed all the info needed, what else are you looking for? It's a Galaxy SII, when I get to recovery mode at the top of the screen is: CWMR Touch v5.5.0.4 other than that I'll need more specifics as to what info you need.
oldblue05 said:
I thought I listed all the info needed, what else are you looking for? It's a Galaxy SII, when I get to recovery mode at the top of the screen is: CWMR Touch v5.5.0.4 other than that I'll need more specifics as to what info you need.
Click to expand...
Click to collapse
go into CWM, wipe cache and dalvik cache(under advanced) and fix permissions, also under andvanced i believe.
If that doesnt help, might have to wipe data.
oldblue05 said:
I thought I listed all the info needed, what else are you looking for? It's a Galaxy SII, when I get to recovery mode at the top of the screen is: CWMR Touch v5.5.0.4 other than that I'll need more specifics as to what info you need.
Click to expand...
Click to collapse
MotoMudder77 said:
go into CWM, wipe cache and dalvik cache(under advanced) and fix permissions, also under andvanced i believe.
If that doesnt help, might have to wipe data.
Click to expand...
Click to collapse
I want to make sure you don't brick your phone with the emmc bug. On stock ics if you wipe you can brick your phome
Sent from my SGH-I777
I did what you said and to no change other than the samsung logo being listed longer while it loaded, splash screen appeared and went into the loop.
oldblue05 said:
I did what you said and to no change other than the samsung logo being listed longer while it loaded, splash screen appeared and went into the loop.
Click to expand...
Click to collapse
The only thing left to try would be to use factory reset in cwm. If that doesnt work then youll have to flash new firmware
122ninjas said:
I want to make sure you don't brick your phone with the emmc bug. On stock ics if you wipe you can brick your phome
Sent from my SGH-I777
Click to expand...
Click to collapse
didn't see this post when I made the last one
BROKKANIC said:
The only thing left to try would be to use factory reset in cwm. If that doesnt work then youll have to flash new firmware
Click to expand...
Click to collapse
I did the factory reset and nothing changed, I'll start searching how to flash new firmware
Actually on second though after reading I'll wait for more advice as the last thing I wanna do is brick this thing
oldblue05 said:
Actually on second though after reading I'll wait for more advice as the last thing I wanna do is brick this thing
Click to expand...
Click to collapse
I would suggest you try flashing stock UCKH7 to see if that will clear the boot loop. To do that, follow the guide in my signature. If you want to try straight stock, use the guide to return the phone to the store. If you want to try stock plus root, use the guide about flashing custom binaries. The download link for the firmware you need is contained within the guides. After you flash, see if the phone boots. If it still loops, enter 3e recovery and do a wipe data/factory reset. If it still loops, or not, let us know the results. Doing the above will be safe since the firmwares contain no bootloaders, and also are free of the eMMC superbrick bug.
oldblue05 said:
I did what you said and to no change other than the samsung logo being listed longer while it loaded, splash screen appeared and went into the loop.
Click to expand...
Click to collapse
Get into download mode and flash the stock UCKH7. If it still persists then your phone is screwed
Thanks for the help, I finally was able to get ahold of a buddy that does this stuff for a living and he fixed it in like 5 min flat.
His business: mobiletechvideos.com
Either you've got one helluva friend, or this is one fail of a plug
Clay
Team Pirate
Sent from my PINK SGH-I777
You're welcome. I graduated with this guy and he lives within 30 minutes of my offices...
connexion2005 said:
You're welcome. I graduated with this guy and he lives within 30 minutes of my offices...
Click to expand...
Click to collapse
You are a BadAss at what you do my dude, I enjoy watching your videos on YT, you literally turn bricks in to phones!!! Much props for the solid work you do and helping people out.... :good::good: How did you fix his phone Factory/reset right?

1st time rooting my galaxy s2 sgh-1777 and it wont turn on, help!

I went to galaxys2root and did all the steps i needed to root my phone, i succesfully rooted my phone but after intalling ROM manager and tried to download new fonts, my phone turned off and hasnt turned on since then, it will still go into download mode by pressing volume up, down and the power button but thats it, i need help! :/
RocketRaccoon said:
I went to galaxys2root and did all the steps i needed to root my phone, i succesfully rooted my phone but after intalling ROM manager and tried to download new fonts, my phone turned off and hasnt turned on since then, it will still go into download mode by pressing volume up, down and the power button but thats it, i need help! :/
Click to expand...
Click to collapse
There are 2 fails here. You went to Galaxys2root.com and then you used rom manager. niice.Just get into download mode and flash the stock firmware from the Dev forum
RocketRaccoon said:
I went to galaxys2root and did all the steps i needed to root my phone, i succesfully rooted my phone but after intalling ROM manager and tried to download new fonts, my phone turned off and hasnt turned on since then, it will still go into download mode by pressing volume up, down and the power button but thats it, i need help! :/
Click to expand...
Click to collapse
I always wonder why people go there then come here for help when their phones get messed up.
Follow this guide..... http://forum.xda-developers.com/showthread.php?t=1313659 flash back to stock first.
Then you can follow this guide to re-root and install CWM.... http://forum.xda-developers.com/showthread.php?t=1311081
Don't forget to hit the Thanks button on creepyncrawly's threads.
Lastly, don't ever go use gs2root and rommgr ever again.
BROKKANIC said:
I always wonder why people go there then come here for help when their phones get messed up.
Follow this guide..... http://forum.xda-developers.com/showthread.php?t=1313659 flash back to stock first.
Then you can follow this guide to re-root and install CWM.... http://forum.xda-developers.com/showthread.php?t=1311081
Don't forget to hit the Thanks button on creepyncrawly's threads.
Lastly, don't ever go use gs2root and rommgr ever again.
Click to expand...
Click to collapse
How do i flash back to stock? im a complete noob and dont know many things :/ i definitely wont go back to GS2root..
I am a noob too!
Hey guys like my buddy here I am a total noob. I used hiemdall suite to flash my kernel and get CWM...after a successful flash my phone is stuck at the triangle screen. I can get to CWM recovery screens and download mode what do i do next?!
mvmoti01 said:
Hey guys like my buddy here I am a total noob. I used hiemdall suite to flash my kernel and get CWM...after a successful flash my phone is stuck at the triangle screen. I can get to CWM recovery screens and download mode what do i do next?!
Click to expand...
Click to collapse
Make your own thread and add more details like version
Sent from my SGH-I777
---------- Post added at 12:39 PM ---------- Previous post was at 12:38 PM ----------
RocketRaccoon said:
How do i flash back to stock? im a complete noob and dont know many things :/ i definitely wont go back to GS2root..
Click to expand...
Click to collapse
Read the thread. Read the first post over and over until you know what you are doing
Sent from my SGH-I777
122ninjas said:
Make your own thread and add more details like version
Sent from my SGH-I777
---------- Post added at 12:39 PM ---------- Previous post was at 12:38 PM ----------
Read the thread. Read the first post over and over until you know what you are doing
Sent from my SGH-I777
Click to expand...
Click to collapse
kay, im trying to fix it now, thanks for all the help
RocketRaccoon said:
How do i flash back to stock? im a complete noob and dont know many things :/ i definitely wont go back to GS2root..
Click to expand...
Click to collapse
Click on the link I posted and follow instructions. Then click on the second link and follow those instructions.
BROKKANIC said:
I always wonder why people go there then come here for help when their phones get messed up.
Click to expand...
Click to collapse
I wonder the same thing. It's like, why not just come here first? Someone should hack the Site and just stick a link to here on the Site. Save a lot of headaches for everyone.
Sent from my SGH-I777 using xda premium
BROKKANIC said:
Click on the link I posted and follow instructions. Then click on the second link and follow those instructions.
Click to expand...
Click to collapse
I did everything that it says to do on here..http://forum.xda-developers.com/showpost.php?p=18608050&postcount=6
after that the triangle went away but it sent me to the android system recovery 3e, it gives me the option to reboot and ive tried that but it stays at the screen where it just says SAMSUNG GALAXY SII and doesnt do anything else, i try to go into download mode again and it sends me to the android system recovery 3e again with the other options being: 1)apply update from sdcard 2)wipe data/factory reset 3)wipe cache partition. i clicked on the wipe data/factory reset too and nothing happened. what do i do?
RocketRaccoon said:
I did everything that it says to do on here..http://forum.xda-developers.com/showpost.php?p=18608050&postcount=6
after that the triangle went away but it sent me to the android system recovery 3e, it gives me the option to reboot and ive tried that but it stays at the screen where it just says SAMSUNG GALAXY SII and doesnt do anything else, i try to go into download mode again and it sends me to the android system recovery 3e again with the other options being: 1)apply update from sdcard 2)wipe data/factory reset 3)wipe cache partition. i clicked on the wipe data/factory reset too and nothing happened. what do i do?
Click to expand...
Click to collapse
Wipe data/factory reset is the correct next step. Select that line using the vol buttons, then press the power button. You will see text appear that confirms the wipe was completed. Then your phone should boot.
Next go to the second guide that BROKKANIC posted for you (first link in my signature) and follow the steps. Feel free to ask if there is something you don't understand.
creepyncrawly said:
Wipe data/factory reset is the correct next step. Select that line using the vol buttons, then press the power button. You will see text appear that confirms the wipe was completed. Then your phone should boot.
Next go to the second guide that BROKKANIC posted for you (first link in my signature) and follow the steps. Feel free to ask if there is something you don't understand.
Click to expand...
Click to collapse
i did as you said and it still only stays at the SAMSUNG GALAXY SII screen and does nothing, ive waited for hours and it only stays there
Guessing you didn't read this..... http://forum.xda-developers.com/showthread.php?t=1824419
RocketRaccoon said:
I went to galaxys2root and did all the steps i needed to root my phone, i succesfully rooted my phone but after intalling ROM manager and tried to download new fonts, my phone turned off and hasnt turned on since then, it will still go into download mode by pressing volume up, down and the power button but thats it, i need help! :/
Click to expand...
Click to collapse
What do you mean tried to download new fonts? I'm not familiar with that program, but to get you going, we need to figure out what got damaged. Please explain as much as possible.
creepyncrawly said:
What do you mean tried to download new fonts? I'm not familiar with that program, but to get you going, we need to figure out what got damaged. Please explain as much as possible.
Click to expand...
Click to collapse
I got the phone to work, im back on gingerbread, is it fine if i update the software via samsung kies to start running on ICS again?
RocketRaccoon said:
I got the phone to work, im back on gingerbread, is it fine if i update the software via samsung kies to start running on ICS again?
Click to expand...
Click to collapse
I would personally suggest against that. Just use odin to flash a gb custom kernel. Then flash one of the better ICS firmwares we have available in the development forum.
Sent from my SGH-I777 using xda premium
RocketRaccoon said:
I got the phone to work, im back on gingerbread, is it fine if i update the software via samsung kies to start running on ICS again?
Click to expand...
Click to collapse
That's your call, of course. I'd recommend against it. If you really want stock ICS I'd at least install stock plus root, and install a custom and known safe kernel. See this thread in development.
Or, install the custom firmware of your choice from the forums here. For a popular stock ICS rom, there is Semi by AJ Newkirk.
creepyncrawly said:
That's your call, of course. I'd recommend against it. If you really want stock ICS I'd at least install stock plus root, and install a custom and known safe kernel. See this thread in development.
Or, install the custom firmware of your choice from the forums here. For a popular stock ICS rom, there is Semi by AJ Newkirk.
Click to expand...
Click to collapse
See, thats where i get stuck, how do i install different ROMs and kernels? thats what i was trying to do before and i messed up my phone. i dont want the same thing to repeat again, im not even sure if im still rooted?
RocketRaccoon said:
See, thats where i get stuck, how do i install different ROMs and kernels? thats what i was trying to do before and i messed up my phone. i dont want the same thing to repeat again, im not even sure if im still rooted?
Click to expand...
Click to collapse
Get into cwm and flash the zip factory reset and booot
Sent from my SGH-I777
RocketRaccoon said:
See, thats where i get stuck, how do i install different ROMs and kernels? thats what i was trying to do before and i messed up my phone. i dont want the same thing to repeat again, im not even sure if im still rooted?
Click to expand...
Click to collapse
Click and read the second link I posted in my reply or the first link in creepys signature.

YP-G1 Black Screen Brick (((((HELP!!!!)))))

I was trying to return to stock using Heimdall. It failed for some reason. Whenever I have tried to use it it always says it failed but this time it went further then usual but the end result was a fail. I think it just repartitioned but I'm not sure. Anyways the only thing it would do is boot into cwm and download mode. So I restored a backup a previously made. Same thing it only booted into download mode and cwm. So I went and tried to flash through odin. Everything worked fine and still the same thing. So then I followed the unbrick thread on XDA and flashed the file and everything finished and said successful but my device would not boot up at all. Doing a little more research it seems that the unbrick method was for 5.0 devices only which I don't know why it isn't placed in plain sight for everyone to see but anyways now I have a dead device. Has anyone had any success with fixing this problem?
Can someone please help me
fresh85 said:
Can someone please help me
Click to expand...
Click to collapse
Ok so:
1. This isn't even talking about development so why are you putting it into dev section?
2. Have you tried a jig to get you back into download mode?
zaclimon said:
Ok so:
1. This isn't even talking about development so why are you putting it into dev section?
2. Have you tried a jig to get you back into download mode?
Click to expand...
Click to collapse
I posted here because I have learned that only here is where people respond but anyways yes I have tried a jig and nothing happens.
fresh85 said:
I posted here because I have learned that only here is where people respond but anyways yes I have tried a jig and nothing happens.
Click to expand...
Click to collapse
Wrong attitude, man. XDA is a free service and you are soliciting unpaid help. Follow the forum rules.
Most, if not all, of our Galaxy Player forum developers and contributors pay attention to all threads and you will get an answer from someone who knows.
If not, look in the development forum and find a developer and send a PM.
Don't clutter the wrong forum with your pleas for help, acting like you're the only one with that problem.
fresh85 said:
I posted here because I have learned that only here is where people respond but anyways yes I have tried a jig and nothing happens.
Click to expand...
Click to collapse
And you expect really having an answer here? You are serious right? Please tell me 1 recent thread on general that haven't been replied and then we can see if we never replies. Geez people are never grateful from what I see...
You guys are getting upset for the wrong reason. I have no attitudes and I'm just looking for help. I tried the other forum and didn't get any reply so I moved it to this forum and I am seeing some activity. I didn't know it was a crime. I was asked a question and an answer was given. Don't mistake a straight forward answer for an attitude. Thanks for your input. Now is there a solution for my problem? The SGP is my little nephews and I experimented with it and messed it up. All I want is a point in the right direction.
It might be a kernal issue. Try flashing a kernal for the 4 and see if that works.
Sent from my Chip 1.5 ROM + Entropy512's Kernal Samsung Galaxy Player 5.0 U.S.
fresh85 said:
You guys are getting upset for the wrong reason. I have no attitudes and I'm just looking for help. I tried the other forum and didn't get any reply so I moved it to this forum and I am seeing some activity. I didn't know it was a crime. I was asked a question and an answer was given. Don't mistake a straight forward answer for an attitude. Thanks for your input. Now is there a solution for my problem? The SGP is my little nephews and I experimented with it and messed it up. All I want is a point in the right direction.
Click to expand...
Click to collapse
Alright, let's all take a deep breath and chill. We empathize with you, dude, we really do.
We need to address another XDA rule that you overlooked. (Understandably. No biggie. Not calling you out, just saying.)
When you post on XDA, you need to be as thorough about your problem as possible, so we don't clutter the thread with Q&A.
1. Symptoms of the problem: What works and doesn't?
2. Any reactions to button presses? Lights? Screen? Sound?
3. Any evidence that it's booting?
4. Does your computer register that it's being plugged in?
That'll help you get started. List anything else that might be noteworthy. Someone will help you.
Also, nightfire brings up a good point. Try flashing the stock kernel for your device via ODIN.
EDIT:
What procedure did you go through when you were following the (wrong) un-brick instructions? Because, if your device is totally unresponsive, you've probably got yourself a Galaxy Paper Weight. If it's not something as dire as that, there may still be hope.
Did you attempt to flash a 5.0 bootloader on a 4.0? A wrong kernel flash wouldn't screw up your device as badly as that. You may need to re-partition some things (/efs and PIT, perhaps) and re-flash stock ROM.
But, please, work with us here and be specific about exactly what you did that led up to the current.
Screen doesn't turn on at all and odin doesn't recognize it.
I used this method....."[10/13]Brick Station! Here to solve your brickable needs! BOOTLOADERS AVAILABLE!!!". I'm not even sure anymore why I felt I needed to use that method but before I followed those steps my SGP would only go into download mode and CWM. I flashed roms and kernels using odin and it said pass...reset. I even restored an old backup but no matter what I did it always rebooted back into CWM. I followed the brick station steps but not the un-resurrectable part because my problem wasn't that extreme but after following through with those steps I now have a device that requires the un-resurrectable method but now I know that it's only for the 5.0. When I connect my device to my laptop it makes a sound like there is some life but nothing pops up...turns on or flashes. I even used a usb jig to try and get it to download mode but nothing at all.
Thank you guys for the help.
where are you now
check this thread out it might help---http://forum.xda-developers.com/showthread.php?t=1903252---Good luck
fresh85 said:
I used this method....."[10/13]Brick Station! Here to solve your brickable needs! BOOTLOADERS AVAILABLE!!!". I'm not even sure anymore why I felt I needed to use that method but before I followed those steps my SGP would only go into download mode and CWM. I flashed roms and kernels using odin and it said pass...reset. I even restored an old backup but no matter what I did it always rebooted back into CWM. I followed the brick station steps but not the un-resurrectable part because my problem wasn't that extreme but after following through with those steps I now have a device that requires the un-resurrectable method but now I know that it's only for the 5.0. When I connect my device to my laptop it makes a sound like there is some life but nothing pops up...turns on or flashes. I even used a usb jig to try and get it to download mode but nothing at all.
Thank you guys for the help.
Click to expand...
Click to collapse
I have done the samething. I food get it going. Is this a US model.
Samsung Epic 4G Touch on xda premium
tim1089 said:
I have done the samething. I food get it going. Is this a US model.
Samsung Epic 4G Touch on xda premium
Click to expand...
Click to collapse
Yes it's the U.S model
Have you tried this ?http://forum.xda-developers.com/showthread.php?t=1531850. So what I gather is you can get to the download mode. If you can then you can fix it. The link I posted here is a good place to get everything you need. Use Hemidall method this was the only way to fix it. I had no luck with Odin. If your PC is not seeing your player go into device manager and remove everything under universal USB. after that click on the action menu and scan for new hardware. It will reinstall the usb stuff. reboot PC. Then get the samsung USB drivers install them. Next if you correctly installed hemidall it should work and see your deivice. Read the info ib this link carefully pick the right player. Down load the PIT file for your player. Then in hemidall install the partitions in the correct order as in the instruction. Let me know if this helps or if I can help you more
Made any progress, fresh85?
Higgs_Boson said:
Made any progress, fresh85?
Click to expand...
Click to collapse
No progress with getting my SGP working. I don't think I'm explaining my problem correctly because people are telling me to follow the steps that got me to this point lol but all the help is appreciated.
If you press and hold POWER + VOLUME DOWN for about 10 ~ 15 seconds, do you see a screen with a yellow construction-like sign appear? If so, you are in download mode, and that is a good thing. Try it and let me know.
Nope nothing turns on at all. I dont think its a complete brick yet because i get a beep sound from the computer when i connect it but no signs of life on the device.
Sent from my SGH-T769 using xda app-developers app

[SOLVED]S2 bricked?

Hello, sorry for being dumb, but this is the case.
I rooted my phone, everyone was ok, but I wanted to install a custom kernel, so I wanted to install a custom recovery, so I dowloaded ROM manager from the market and installed it, I selected to install a custom recovery, everything went ok, so I pressed to boot into recovery, and that's where it gets stuck on the S2 logo, won't go past that.
What are my options?
Back to stock via Odin - clean slate & you can then 'start again' (re-root, reinstall custom rom/kernel whatever).
Don't use Rom Manager with the SGS2 at all; it's notorious for doing what you've just experienced (you don't need it - you have CWRecovery for all your flashing/backup/restore/etc needs).
P.S - Bricked phones are exactly that; bricked. They don't boot. If a phone boots, it ain't bricked. There's no such thing as 'hard' or 'soft' bricked. It either tis or t'aint.
Thanks for replying, and good to hear that there is some hope, can you refer to any guide/tutorial of what to do exactly, I don't want to stumble upon something wrong and make things worse.
3rd thread stickied near the top in this forum.
braien334 said:
Thanks for replying, and good to hear that there is some hope, can you refer to any guide/tutorial of what to do exactly, I don't want to stumble upon something wrong and make things worse.
Click to expand...
Click to collapse
Power off. Press Volume Down + Power and it'll boot into download mode (let's hope so), and flash back to Stock 4.1.2
Then flash Siyah Kernel. It includes SuperUser and CWM.
Sent from my GT-I9100 using Tapatalk 4
MistahBungle said:
3rd thread stickied near the top in this forum.
Click to expand...
Click to collapse
Okay, thanks, will try, and will let you know the result.
Thanks a lot, works now.:good:
Good man
braien334 said:
Thanks a lot, works now.:good:
Click to expand...
Click to collapse
And don't forget to add [SOLVED] to the title of your post for other members. :good:

From 4.0.3 to Kitkat

Hello, i'm from the Netherlands,
I've tried this several times and it didn't work...
What am i supose to do to prepair mine S2 to flash to Kittkat. If i try to flash a custom rom to install (Muiu) the phone starts up but immidiatly turns black and i have to eject the battery to be able to start the S2 again.
I've done the wipe things.
Can someone give me instruction how to install the new Kittkat with (if it's possible) download links
thank you :cyclops:
Loek3000 said:
Hello, i'm from the Netherlands,
I've tried this several times and it didn't work...
What am i supose to do to prepair mine S2 to flash to Kittkat. If i try to flash a custom rom to install (Muiu) the phone starts up but immidiatly turns black and i have to eject the battery to be able to start the S2 again.
I've done the wipe things.
Can someone give me instruction how to install the new Kittkat with (if it's possible) download links
thank you :cyclops:
Click to expand...
Click to collapse
U need to download kk comptiable recovery.. (Search for it)
Flash it
Don't reboot
Reboot to recovery
Full wipe
Flash kk ROM
Flash gapps
Reboot
Sent from my Nexus 5 using XDA Free mobile app
Vivek_Neel said:
U need to download kk comptiable recovery.. (Search for it)
Flash it --> (with what, odin?)
Don't reboot
Reboot to recovery
Full wipe --> only wipe the usual or also format and stuff?
Flash kk ROM --> still under Odin? and whitch version for the S2
Flash gapps
Reboot
can u give me a download link to every rom and gapps stuff?
thank you
Click to expand...
Click to collapse
Um, can you search for this stuff that's easily found ? You've been told pretty much exactly what to do, I think you can manage this small part of it yourself.
Vivek_Neel said:
U need to download kk comptiable recovery.. (Search for it)
Flash it
Don't reboot
Reboot to recovery
Full wipe
Flash kk ROM
Flash gapps
Reboot
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
MistahBungle said:
Um, can you search for this stuff that's easily found ? You've been told pretty much exactly what to do, I think you can manage this small part of it yourself.
Click to expand...
Click to collapse
if i could, i wouldn't ask...
just want to know if the flasing happens with Odin or within recovery, it isn't very easy found, because several manuals lead to different results...
Loek3000 said:
if i could, i wouldn't ask...
just want to know if the flasing happens with Odin or within recovery, it isn't very easy found, because several manuals lead to different results...
Click to expand...
Click to collapse
let me ask it diffently:
I've got : CWM-KitKatCompatible-i9100.tar
and to flash: miui_i9100_4.6.6_66a745e760_4.1.zip
everything ok?
Loek3000 said:
let me ask it diffently:
I've got : CWM-KitKatCompatible-i9100.tar
and to flash: miui_i9100_4.6.6_66a745e760_4.1.zip
everything ok?
Click to expand...
Click to collapse
If you try to flash the CWM alone via odin, you will not be able to boot. Get a kernel which is in tar format and you will have to flash that via odin. You can search for philz or hirox.
Once you have flashed the kernel, reboot to recovery, flash a KK compatible kernel (search for gustavo's, dorimanx or apolo), reboot to recovery, create a backup, flash your KK Rom (which you must have downloaded from the OP of that Rom), flash gapps and reboot.
In the list of your files, gapps is missing, get that too.
And in reality, if you spend some time searching and reading the manuals/guides then you wont have to ask these questions.
banjara said:
If you try to flash the CWM alone via odin, you will not be able to boot. Get a kernel which is in tar format and you will have to flash that via odin. You can search for philz or hirox.
Once you have flashed the kernel, reboot to recovery, create a backup, flash your KK Rom (which you must have downloaded from the OP of that Rom), flash gapps and reboot.
In the list of your files, gapps is missing, get that too.
And in reality, if you spend some time searching and reading the manuals/guides then you wont have to ask these questions.
Click to expand...
Click to collapse
thank you, but i don't get it.. OP? i guess my questions are too stupid and i get a dozen of "search this and search that" so i won't bother anyone again :silly:
Your questions were not stupid. They are the basic questions which come to the newbie's mind. But you could either search for the stuff, go through the guides/manuals and spend your time reading and learning(which will be for your own good) or you could ask for spoonfeeding.
Anyways, if you do not want to invest time and energy in understanding all this then its your wish. But a lot of people here would not like to answer basic questions.
224
banjara said:
Your questions were not stupid. They are the basic questions which come to the newbie's mind. But you could either search for the stuff, go through the guides/manuals and spend your time reading and learning(which will be for your own good) or you could ask for spoonfeeding.
Anyways, if you do not want to invest time and energy in understanding all this then its your wish. But a lot of people here would not like to answer basic questions.
Click to expand...
Click to collapse
Look i just want a simple an plain answer, thats why i asked in the 1st place.
Some only rever to the search option or manuals... Like i said, it's confusing to me, i don't need to read stuff i don't need.
I got trouble, so this is why this section is called Help and Troubleshooting ....
I think also if you think that way, you can always reply to say people need to search and read manuals, that's just too easy to say
OP - Banjara is trying to help you. There's no point people giving you a bunch of steps you don't understand. If you don't take as much time as you need to in order to actually learn this stuff, you run the risk of ending up like this.
You may not necessarily do something completely daft like pull a cable in the middle of a flash, but modding your phone is not risk free. On the contrary, there are plenty of ways you can break your phone (to the point of you having to pay someone a not insignificant amount of money to fix it) doing this stuff.
Your questions aren't stupid, but you need to understand if you're not already experienced with this stuff, you're not going to somehow magically learn it all in 5 minutes. You have to take the time & put the effort in to learn it. And everything you need to learn is here, and it's easily found, again, with a bit of effort.
But like most people who come here, you're expecting it to be easy & obviously can't be bothered taking your time/are in too much of a rush.
That's fine, but don't whinge in Q&A if you bust your phone at some point.
MistahBungle said:
OP - Banjara is trying to help you. There's no point people giving you a bunch of steps you don't understand. If you don't take as much time as you need to in order to actually learn this stuff, you run the risk of ending up like this.
You may not necessarily do something completely daft like pull a cable in the middle of a flash, but modding your phone is not risk free. On the contrary, there are plenty of ways you can break your phone (to the point of you having to pay someone a not insignificant amount of money to fix it) doing this stuff.
Your questions aren't stupid, but you need to understand if you're not already experienced with this stuff, you're not going to somehow magically learn it all in 5 minutes. You have to take the time & put the effort in to learn it. And everything you need to learn is here, and it's easily found, again, with a bit of effort.
But like most people who come here, you're expecting it to be easy & obviously can't be bothered taking your time/are in too much of a rush.
That's fine, but don't whinge in Q&A if you bust your phone at some point.
Click to expand...
Click to collapse
The only one who have helped me is : Vivek_Neel
Other reactions are pointless, i was aware of the search thing, so i don't need reminders... Also: i rooted my phone several times, and the question were about if i will do it correctly if i take these steps... And i've done my search and i know a little bit more. Show me what you come up with and i give all the credits, because i can't find 1 basic step....... And please don't bother to react if it's on topic
Loek3000 said:
Look i just want a simple an plain answer, thats why i asked in the 1st place.
Some only rever to the search option or manuals... Like i said, it's confusing to me, i don't need to read stuff i don't need.
I got trouble, so this is why this section is called Help and Troubleshooting ....
I think also if you think that way, you can always reply to say people need to search and read manuals, that's just too easy to say
Click to expand...
Click to collapse
@banjara, .. i've read your 1st post just now, and you indeed tried to help me, it's just i didn't understand what you were saying...
i am sorry for the misunderstanding :good:
Loek3000 said:
@banjara, .. i've read your 1st post just now, and you indeed tried to help me, it's just i didn't understand what you were saying...
i am sorry for the misunderstanding :good:
Click to expand...
Click to collapse
I just stopped working on it. I followed the guidelines which i read in several topics, and still it aint working
So everyone, thanks alot

Categories

Resources