I downloaded Xperia_X10_Firmware_TMobile_UK & Xperia_X10i_2.1.A.0.435_TMOB-UK_GENERIC_1238-8324
Would I be able to install both Firmware & Rom to use with T-mobile USA?
Would this also remove the AT&T lock and accept my T-mobile card?
I haven't tried it yet,I figured I'd ask the experts.
Thanks
f64club said:
I downloaded Xperia_X10_Firmware_TMobile_UK & Xperia_X10i_2.1.A.0.435_TMOB-UK_GENERIC_1238-8324
Would I be able to install both Firmware & Rom to use with T-mobile USA?
Would this also remove the AT&T lock and accept my T-mobile card?
I haven't tried it yet,I figured I'd ask the experts.
Thanks
Click to expand...
Click to collapse
the x10a was made for AT&T, you must first sim unlock the device to get it to work with t-mobile. you can download x10a firmware from THeLogiC's thread here: http://forum.xda-developers.com/showthread.php?t=1749426
since the x10a doesn't have the aws radios required for t-mobile's 3G network, you would only get 2G at best. good luck & hope this helps.
Hello everybody,
My Rogers Lumia 920 (unlocked and pentaband beforehand) was bricked mysteriously overnight and I came across the instructions to unbrick the phone. In my NaviFirm search, I noticed that the Rogers ROMs (releases 1232.2109.1242.1002 i believe) for the RM-820 have disappeared as there are many screenshots of them which were posted a few weeks ago. As a last resort, I flashed the AT&T ROM onto my 920 and I have lost the ability to use my phone on Wind mobile and all other AWS networks. Does anybody by chance have an already downloaded Rogers ROM they could share with me? Are there any other roms for the 920 that don't have the AWS bands disabled?
Thanks in advanced!
TheElse said:
Hello everybody,
My Rogers Lumia 920 (unlocked and pentaband beforehand) was bricked mysteriously overnight and I came across the instructions to unbrick the phone. In my NaviFirm search, I noticed that the Rogers ROMs (releases 1232.2109.1242.1002 i believe) for the RM-820 have disappeared as there are many screenshots of them which were posted a few weeks ago. As a last resort, I flashed the AT&T ROM onto my 920 and I have lost the ability to use my phone on Wind mobile and all other AWS networks. Does anybody by chance have an already downloaded Rogers ROM they could share with me? Are there any other roms for the 920 that don't have the AWS bands disabled?
Thanks in advanced!
Click to expand...
Click to collapse
I just posted links to the Rogers firmware at http://forum.xda-developers.com/showpost.php?p=36686433&postcount=8 .
However, I hate to be the bearer of bad news, but there are reports of the AT&T firmware fully disabling the AWS bands, even if you re-flash the Rogers ROM afterwards. Maybe the posts I've seen are wrong, so by all means give it a try and please let us know the result. :fingers-crossed:
Good Luck!
Wow, thank you so much!!! I'll try it and let you know how it goes.
You have just made my week
Edit: Yeah, the band is still disabled on the Rogers ROM. CURSE YOU AT&T!
Does anybody know how to do a total clearing and re installation of the Rogers ROM then? A bit of a stretch, but hoping this phone won't have to meet Craigslist or something, I love everything about it minus the fact it doesn't work on my network.
Thanks again!
TheElse said:
Wow, thank you so much!!! I'll try it and let you know how it goes.
You have just made my week
Edit: Yeah, the band is still disabled on the Rogers ROM. CURSE YOU AT&T!
Does anybody know how to do a total clearing and re installation of the Rogers ROM then? A bit of a stretch, but hoping this phone won't have to meet Craigslist or something, I love everything about it minus the fact it doesn't work on my network.
Thanks again!
Click to expand...
Click to collapse
After reflashing the rogers rom did you do a factory reset? I really doubt that flashing an at&t rom permanently disables the aws band even after the original rogers rom has been flashed again. That would mean the at&t rom changes a very secure low level area of the phone and it just doesn't seem that likely or anything I've heard of happening before...
TheElse said:
Wow, thank you so much!!! I'll try it and let you know how it goes.
You have just made my week
Edit: Yeah, the band is still disabled on the Rogers ROM. CURSE YOU AT&T!
Does anybody know how to do a total clearing and re installation of the Rogers ROM then? A bit of a stretch, but hoping this phone won't have to meet Craigslist or something, I love everything about it minus the fact it doesn't work on my network.
Thanks again!
Click to expand...
Click to collapse
yea man , same here had a bricked developer phone which I flashed with ATT Rom and now flashed it to Rogers Rom. I am still stuck with Edge on Tmobile :crying:. If only there is a method for a clean installation !
patrick92260 said:
After reflashing the rogers rom did you do a factory reset? I really doubt that flashing an at&t rom permanently disables the aws band even after the original rogers rom has been flashed again. That would mean the at&t rom changes a very secure low level area of the phone and it just doesn't seem that likely or anything I've heard of happening before...
Click to expand...
Click to collapse
By factory reset, do you mean going into about and reset my phone? If so, yep, I tried it and it didn't help recover the aws band. Is there any way to access the system root of the phone, or am I dreaming at this point? Thanks!
TheElse said:
By factory reset, do you mean going into about and reset my phone? If so, yep, I tried it and it didn't help recover the aws band. Is there any way to access the system root of the phone, or am I dreaming at this point? Thanks!
Click to expand...
Click to collapse
Yeah that's what I meant for a reset. The only other way I can even think of getting the AWS back is possibly finding a dialer code that would let you select radio bands. I want to figure this out too b/c I have a sim unlocked at&t lumia that I want to flash the rogers rom to so I can get the AWS band.
patrick92260 said:
Yeah that's what I meant for a reset. The only other way I can even think of getting the AWS back is possibly finding a dialer code that would let you select radio bands. I want to figure this out too b/c I have a sim unlocked at&t lumia that I want to flash the rogers rom to so I can get the AWS band.
Click to expand...
Click to collapse
##3282# (Or ##3282 call) will present you with a thing that lets you change the bands used for 3g and lte, but it doesn't have the aws band (band IV) for selection under 3g D:
TheElse said:
##3282# (Or ##3282 call) will present you with a thing that lets you change the bands used for 3g and lte, but it doesn't have the aws band (band IV) for selection under 3g D:
Click to expand...
Click to collapse
I really have no idea then... But I'm 99% sure after flashing dozens of phones from different companies that the AWS band is not permanently disabled. We just need to find a way to get it back on. Problem is it's probably going to take someone with more technical skills about windows phone 8 (probably searching thru the root directory) to re-enable it.
someone would need to post the baseband of the rogers model and then you can flash the baseband and get your aws band back.
I read somewhere that all the lumias 920 are the same on hardware side, that they only have different softwares and firmware on the inside; rumor has it that if you could get the firmware and baseband that nokia flashes into the dev phones, you could convert any lumia 920 into a dev phone with anything unlocked.
ellokomen said:
someone would need to post the baseband of the rogers model and then you can flash the baseband and get your aws band back.
I read somewhere that all the lumias 920 are the same on hardware side, that they only have different softwares and firmware on the inside; rumor has it that if you could get the firmware and baseband that nokia flashes into the dev phones, you could convert any lumia 920 into a dev phone with anything unlocked.
Click to expand...
Click to collapse
If flashing the att rom to a rogers phone installs the att baseband (which disables AWS) then reflashing the original rogers rom would overwrite the att baseband with the original rogers baseband (should re-enable AWS) so I don't think that is the issue.
patrick92260 said:
If flashing the att rom to a rogers phone installs the att baseband (which disables AWS) then reflashing the original rogers rom would overwrite the att baseband with the original rogers baseband (should re-enable AWS) so I don't think that is the issue.
Click to expand...
Click to collapse
The AT&T baseband seems to stick though, maybe the AT&T rom has another file that has no equivalent in the rogers ROM that's sole purpose it to lock out the AWS band. Hopefully we can get this fixed soon, I'd love to love the Lumia 920, but at this rate, my eyes are starting to turn to the 8x.
patrick92260 said:
If flashing the att rom to a rogers phone installs the att baseband (which disables AWS) then reflashing the original rogers rom would overwrite the att baseband with the original rogers baseband (should re-enable AWS) so I don't think that is the issue.
Click to expand...
Click to collapse
I don't think the rogers firmware includes the rogers baseband, as the baseband is the one that controls the radios and frequencies of the handset.
One can install a firmware without a baseband and viceversa
ellokomen said:
I don't think the rogers firmware includes the rogers baseband, as the baseband is the one that controls the radios and frequencies of the handset.
One can install a firmware without a baseband and viceversa
Click to expand...
Click to collapse
Hmm, I guess we're basically just hunting for the Rogers baseband then. If only there was a way to browse the system root of a windows phone device D:
TheElse said:
Hmm, I guess we're basically just hunting for the Rogers baseband then. If only there was a way to browse the system root of a windows phone device D:
Click to expand...
Click to collapse
The baseband for my stock at&t 920 with the portico ota is 1.0.202075.3. Someone who has a stock rogers 920 that didn't flash the att rom what is your baseband version? (about - more info) Then we need to compare and see what the baseband is on a rogers phone that has lost the AWS band.
patrick92260 said:
The baseband for my stock at&t 920 with the portico ota is 1.0.202075.3. Someone who has a stock rogers 920 that didn't flash the att rom what is your baseband version? (about - more info) Then we need to compare and see what the baseband is on a rogers phone that has lost the AWS band.
Click to expand...
Click to collapse
I just updated my phone to portico and it seems that I've got the same baseband as you. Can anybody with a stock Rogers ROM post their baseband? After updating, my phone popped up with a new message when I put in my wind sim. It said "Phone mode changes. Your phone is now in GSM mode." I have no idea if you can change modes or anything like that.
Hey guys, I just wanted to jump in here and say that I'm having the same issues. I have a BUILD Dev phone that was bricked -> flashed AT&T -> flashed Rogers and the AWS band is disabled / vanished.
I've contacted Nokia Experts and was told the only option at the moment was to get me a new phone... and I've been waiting for months, lol. I'm thinking that they're going to send me a standard unlocked L920 without AWS bands but that's a bridge I'll cross when or if I get there... I was also told that the repair center did not have the ability to fix this problem and when I asked for the original firmware I was told they (Nokia Experts) did not have it.
Someone HAS to know what's going on here and how to fix it!
If anyone finds a way to get the AWS band back I'm willing to PayPal them $100. Maybe those with more skill will help if we offer financial incentive?
I'm in the US on T-Mobile for reference.
What we need to figure out first is what the baseband is on a stock rogers 920 that has never had the att firmware flashed on it. If it is different then it looks like you'll have to wait this out until nokia comes out with new firmware that has an upgraded baseband and hopefully that brings back the AWS
What about the base band from a Dev device like mine? If the Rogers would work as a reference point then I'd imagine the Dev base band would work too.
There are several users here with them. I can't provide mine because It's been flashed as I mentioned, but I'm currently running 1.0.202075.3 as well as others in this thread.
Onyx Z32 said:
What about the base band from a Dev device like mine? If the Rogers would work as a reference point then I'd imagine the Dev base band would work too.
There are several users here with them. I can't provide mine because It's been flashed as I mentioned, but I'm currently running 1.0.202075.3 as well as others in this thread.
Click to expand...
Click to collapse
Is there a way to port TouchXPlorer to WP8? I think it has access to the system directory on WP7 but I've never actually used it before. That might help us extract the correct baseband.
Hi folks.
I'm moving to Australia in March and was curious if this phone would function there, with proper SIM, etc.
I am using i605 in India for the last 8 months.... Works great... Hope you got your answer
Thanks,
Nikhil Dhand
Email : [email protected]
It should. Note II is a world phone and is sim-unlocked. Some software versions have APN settings uneditable... if you can;t edit those, you will not have a data connection on your Aussie carrier... check the following:
system settings --> wireless and networks --> more --> mobile networks --> Access Point Names
if you can add and edit APNs from the menu above, you are good to go.
it also cant hurt to check what bands the major carriers (optus?) use in Australia and confirm that the Note II also operates on them
I'm rooted and can edit apns.
I know AU is quadband which I believe the I605 is based on what the google machine told me
Yeah, I would say you are good to go then. I'd still do some research on Aussie phone companies just to be sure (and also know which carrier is the best value).
---------- Post added at 12:42 PM ---------- Previous post was at 12:37 PM ----------
just for reference of anybody researching this later:
Quad-Band refers to a phone being able to operate on all 4 GSM Bands... aka it will work ANYWHERE.
The Note II is listed as: GSM 850 / 900 / 1800 / 1900
http://www.phonescoop.com/phones/phone.php?p=3926
This map shows what bands are used in what countries:
http://www.worldtimezone.com/gsm.html
Help please...
I am on the new room 4.3 by bean stock deodek
i cant add APN if i use CDMA Sim Card (in Indonesia, i use "smartfren provider"), soo i cant connect to ne net.
but if i use GSM Sim Card i can add the APN and work fine.
When i was on 4.1 stock
i use apn maneger and titanium backup (to change apn mngr as system) and it is work for both cdma dan gsm sim card.
Please help ..... how to make my I605 work on CDMA sim card
Thanks
Help please...
I am on the new room 4.3 by bean stock deodek
i cant add APN if i use CDMA Sim Card (in Indonesia, i use "smartfren provider"), soo i cant connect to ne net.
but if i use GSM Sim Card i can add the APN and work fine.
When i was on 4.1 stock
i use apn maneger and titanium backup (to change apn mngr as system) and it is work for both cdma dan gsm sim card.
Please help ..... how to make my I605 work on CDMA sim card
Thanks
Hi, I need help.
So, I bought 2 moto E 2015 model (at&t unlocked) from Ebay - very cheap.
But this phones working with only 2G mode in my country (even theese are LTE models ).
I want to reinstall system to better one - which there is no any at&t default applications or any of carrier applications.
And I also want to change baseband versions - because, this phone working only with 2G network type with my country's mobile carriers. I think it should be for baseband (network standarts) .
is it possible to fix problem with change firmware and baseband to no-contract version?
I asked my mobile carrier, they said, "we are using 900-1800 MHZ for GSM ; 900-2100 for 3G, 2100 for LTE (up to 2100)
Who can provide how to and links?
Thanks.
The AT&T model cannot be bootloader unlocked, so you cannot change the firmware to another version. There's a guide in the General forum about enabling additional LTE bands, you can try tweaking it for 3G, but there's no guarantee that the AT&T model's antenna hardware can support those bands.