I bought a Note 3 clone. Chipset MTK 6572 1.3 GHZ MAli 400 GPU
Single Sim, Air controls, S Pen
The screen was flickering so i decided to Flash another rom. I flashed a ROM and now the phone is bricked. Only Black Screen. I am not able to access recovery either. I had created a backup of my own phone but that i am not able to flash. I get error DRAM failed : 4032. Please help me.
IF you know any rom that would work please let me know. I really need help. Phone is dead
Anybody???
please guys..help..Any ROM??? links..anything..
Guys help please
Try formatting with SP flashtool and flash the ROM again....might work!!!
Aguthadeus said:
Try formatting with SP flashtool and flash the ROM again....might work!!!
Click to expand...
Click to collapse
I have same problem with same specs (maybe:crying and have already flashed about 20 roms and have no luck (always ends with brom error enable dram fail)..
Clone note mtk 6572, ram 512, lcd 5.7"
Almost all people say we just need compatible factory rom and flashed it, but its dificult to find (
I just wonder how do chinesse manufacturer flash the rom for the first time?
Is there any tools?
poerwa said:
I have same problem with same specs (maybe:crying and have already flashed about 20 roms and have no luck (always ends with brom error enable dram fail)..
Clone note mtk 6572, ram 512, lcd 5.7"
Almost all people say we just need compatible factory rom and flashed it, but its dificult to find (
I just wonder how do chinesse manufacturer flash the rom for the first time?
Is there any tools?
Click to expand...
Click to collapse
the solution to the problem is: do a firmware upgrade first and then formats and downloads of it u want in this order, I bet it works if you have already installed drivers
Hey can you please upload the backup file to mega.co.nz? Please, I would be thankful. I have the same phone and if I manage to fix it, I'll let you all know. Thanks.
harry92008 said:
I bought a Note 3 clone. Chipset MTK 6572 1.3 GHZ MAli 400 GPU
Single Sim, Air controls, S Pen
The screen was flickering so i decided to Flash another rom. I flashed a ROM and now the phone is bricked. Only Black Screen. I am not able to access recovery either. I had created a backup of my own phone but that i am not able to flash. I get error DRAM failed : 4032. Please help me.
IF you know any rom that would work please let me know. I really need help. Phone is dead
Click to expand...
Click to collapse
upload pic ... backward sticker under battery and etc
Hi guys,
Similar to me, I got a fake S5 with the chip MTK6572.
Before to "lost" the mobile, the system or even "AnTuTu Benchamark" detected 3GB Ram and 16Gb storage. well this is not subject.
After rooting the phone, I wanted to install a CWM, then I used the ROM Manager application and another app to do the same. I could installed CWM and the TRW. I tried to reboot the phone in recovery mode and any worked. Even if the CWM installed didnt work, the phone started well.
Some minutes later when I was using the phone as usual, the mobile shutdowned, since this moment I cannot start it again.
The only thing that I can do is, to start the "recovery mode", with the button combination vol up + power + home, it just opens normally;
Select boot mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[recovery mode]
[fastboot mode]
[normal mode]
The ADB doesn't work, I tried with Win and Linux, the prompt never find the phone, even if the OS detects that there is something in the USB and I am using the MKT drivers.
I tried more than one tool through the computer (ODIN, sp_flash_tool and adb/fastboot), but no chance.
Well I hope that someone can help us, anyway if you have any recommendation/suggestion, feel free!
Thanks in advance
specs needed.
Please post specs here if you have it from mtk droid tools.. ill help as I fixed my same problem.
MT6572 stuck at "Select Boot Mode" screen...
mdabar said:
Hi guys,
Similar to me, I got a fake S5 with the chip MTK6572.
Before to "lost" the mobile, the system or even "AnTuTu Benchamark" detected 3GB Ram and 16Gb storage. well this is not subject.
After rooting the phone, I wanted to install a CWM, then I used the ROM Manager application and another app to do the same. I could installed CWM and the TRW. I tried to reboot the phone in recovery mode and any worked. Even if the CWM installed didnt work, the phone started well.
Some minutes later when I was using the phone as usual, the mobile shutdowned, since this moment I cannot start it again.
The only thing that I can do is, to start the "recovery mode", with the button combination vol up + power + home, it just opens normally;
Select boot mode:
[VOLUME_UP to select. VOLUME_DOWN is OK.]
[recovery mode]
[fastboot mode]
[normal mode]
The ADB doesn't work, I tried with Win and Linux, the prompt never find the phone, even if the OS detects that there is something in the USB and I am using the MKT drivers.
I tried more than one tool through the computer (ODIN, sp_flash_tool and adb/fastboot), but no chance.
Well I hope that someone can help us, anyway if you have any recommendation/suggestion, feel free!
Thanks in advance
Click to expand...
Click to collapse
FYI, I have recovered the phone
After too many tries, the phone entered in fastboot mode
1. Pull out battery and put back in
2. By holding (Volumen_UP) + (POWER)
3. Plug USB cable into PC
4. I selected: fastboot mode --> before it didnt work this option
5. Phone shows "FASTBOOT MODE"
6. With USB connection still plugged into PC, fastboot reboot-bootloader
7. After rebooting, fastboot continue
The phone started with the default bootloader and finally OS run
MTK 6572 S5 Clone/Fake details
mdabar said:
FYI, I have recovered the phone
After too many tries, the phone entered in fastboot mode
1. Pull out battery and put back in
2. By holding (Volumen_UP) + (POWER)
3. Plug USB cable into PC
4. I selected: fastboot mode --> before it didnt work this option
5. Phone shows "FASTBOOT MODE"
6. With USB connection still plugged into PC, fastboot reboot-bootloader
7. After rebooting, fastboot continue
The phone started with the default bootloader and finally OS run
Click to expand...
Click to collapse
Hi guys,
After recover the phone, I have taken some screenshots with the phone details (using AnTuTu Benchmark). Also I have done a copy of the original ROM (default) for the future.
https://onedrive.live.com/redir?resid=12502AC16380536C!5396&authkey=!ADNAKVaxQ7EWciI&ithint=folder%2c
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In one of the picture, the storage capacity should be wrong, The "System Storage" total and available.
I guess that the real storage of this phone is:
RAM 3GBSystem Storage 1GBInternal Storage 1.27 GB
Well I don't know what information is true about this phone, and neither how I can figure out the real information.
Do you think that is a good idea to install another ROM over the phone? How can I find a compatible ROM?
Thanks in advance
flash stock backup using SP flash tool
Related
This is the first time it happens to me. I'm not an expert with cellphones, but i think this is a very weird situation.
This is the history. My cousin gave me his Moto X Play as a gift after he went to a local to repair the phone's broken display. It looked good well when i used it at the first time. But, when i tried to root that phone i have noticed a very weird issue....
The phone can't enter to a Fastboot mode when i press the buttons, and when i turn it on, it doesn't seem to have a boot logo. Im not sure about this situation, but im afraid that this phone doesn't have a boot logo, or fastboot menu.
-The phone doesn't seems to be rooted before, or have an another recovery, but i'm not sure about this.
-Everyting in the phone's system seems ok.
-The phone turns on with order (The right time and right boot), there's also the boot animation except that there's no logo.
-I have a little trouble with the phone's speaker, but, thats an another situation.
What can i do about? What do you think this is about? I can't talk with my cousin because his not living in my town, and he doesn't know about this.
Are you sure all the buttons are working ?
Are you saying that the phone manages to boot to the OS (Android)
It also sounds like you've deleted or corrupted some files e.g. the boot logo file (which contains a load of images not just the unlocked one)
Once its booted and you connect via ADB?
Have you rooted the phone, and does ADB have root.
Have you tried installing a replacement boot img file ? (not sure if this is possible from ADB)
RogerClark said:
Are you sure all the buttons are working ?
Are you saying that the phone manages to boot to the OS (Android)
It also sounds like you've deleted or corrupted some files e.g. the boot logo file (which contains a load of images not just the unlocked one)
Once its booted and you connect via ADB?
Have you rooted the phone, and does ADB have root.
Have you tried installing a replacement boot img file ? (not sure if this is possible from ADB)
Click to expand...
Click to collapse
.....
1. Yes! Pretty sure
2. Yes, the OS runs perfectly
3. I'm not sure about that, it may be
4. Nope
5. Not me, maybe another guy, but the phone doesn't seem to be rooted right now
6. Nope
Anny sugest?
Try entering fastboot with no power cable connected (not connected to the PC or charger)
Hold the power and volume down for at least 15 secs (needs longer than you expect)
(I see that on some Motorola G's if it is connected to a PC or power it doesn't seem to enter fastboot)
RogerClark said:
Try entering fastboot with no power cable connected (not connected to the PC or charger)
Hold the power and volume down for at least 15 secs (needs longer than you expect)
(I see that on some Motorola G's if it is connected to a PC or power it doesn't seem to enter fastboot)
Click to expand...
Click to collapse
I tried those before and nothing. Anything else you can think for me?
Have you tied this
https://forum.xda-developers.com/showthread.php?t=1853159
RogerClark said:
Have you tied this
https://forum.xda-developers.com/showthread.php?t=1853159
Click to expand...
Click to collapse
I have tried, but console says my ADB Device is Offline. What can i do? My ADB Tools are up to date
I presume you followed the instructions in the linked thread and enabled the developer options etc
One thing I've noticed about Marshmallow and Nougat is that ADB doesnt seem to work unless you select File Transfer instead of Charging in the "Using USB to " notification popup.
Otherwise if you do
adb devices
there is nothing in the list
RogerClark said:
I presume you followed the instructions in the linked thread and enabled the developer options etc
One thing I've noticed about Marshmallow and Nougat is that ADB doesnt seem to work unless you select File Transfer instead of Charging in the "Using USB to " notification popup.
Otherwise if you do
adb devices
there is nothing in the list
Click to expand...
Click to collapse
I'll keep that in mind, thanks a lot for those sugestions.
RogerClark said:
I presume you followed the instructions in the linked thread and enabled the developer options etc
One thing I've noticed about Marshmallow and Nougat is that ADB doesnt seem to work unless you select File Transfer instead of Charging in the "Using USB to " notification popup.
Otherwise if you do
adb devices
there is nothing in the list
Click to expand...
Click to collapse
UPDATE: It seems i can access to bootloader from the computer, but screen is black when that happens. When i finaly entered to fastboot mode screen was all black and nothing happened. I noticed about this 'cause when i pushed the "+" button phone has restarted with normaly. What do you think about this?
As an extra, these messages apear when i write an ADB comand...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
UPDATE: I've already unlocked the phone's bootloader, but can't flash the TWRP Recovery. When i try it says it was flashed sucessfuly, but, when i enter to recovery mode, it haves the stock recovery.
I've not personally experienced this, but I think you are supposed to make sure you reboot back onto recovery after flashing TWRP because some systems will overwrite TWRP the next time you boot.
If you can get hold of the original ROMs for the phone, (search this forum). I'd recommend perhaps you flash them first, using mfastboot, and get the phone back into a factory configuration.
And make sure you erase the existing files first, on my Moto G I normally erase all of these
mfastboot erase boot
mfastboot erase system
mfastboot erase userdata
mfastboot erase cache
mfastboot erase webtop
mfastboot erase preinstall
But moto X is probably different
RogerClark said:
I've not personally experienced this, but I think you are supposed to make sure you reboot back onto recovery after flashing TWRP because some systems will overwrite TWRP the next time you boot.
If you can get hold of the original ROMs for the phone, (search this forum). I'd recommend perhaps you flash them first, using mfastboot, and get the phone back into a factory configuration.
And make sure you erase the existing files first, on my Moto G I normally erase all of these
mfastboot erase boot
mfastboot erase system
mfastboot erase userdata
mfastboot erase cache
mfastboot erase webtop
mfastboot erase preinstall
But moto X is probably different
Click to expand...
Click to collapse
What do you refer with factory configuration? Actualy the phone are supposed to be on Stock. The phone has never unlocked by bootloader, i'm almost sure of that. So, for that reason i suppose the phone had never another rom.
Maybe i can be wrong, but. Why do you thing there are missing files?
Hi there!
I ported this TWRP recovery from Mi pad 3 and it works perfectly! It was tested on official firmware TOS-V2.01-A921 (Phoenix OS), I don't know will it work on older firmwares or not (try at your own risk). All user data and storage will be fully erased!
Step 1
First of all you need to unlock bootloader. It's required ADB to be installed on your PC, because it will be done via fastboot.
Follow this steps:
-connect the tablet to pc, (first you have to enable OEM unlocking and USB debugging in Developer options)
- reboot the tablet in fastboot mode, hold buttons “power+Vol +” at startup, choose fastboot mode with Vol+ button, valid with Vol-
- open a command prompt in adb folder, then “fastboot devices”, then “fastboot oem unlock”, it should say “OKAY, finished”
Now it's done.
Step 2
Download this archive and unpack it (contains everything you need) - https://mega.nz/#!C1w0GaAI!Zw1QXuAgBLNOjymsWanQPuoKr8N6IhPAhuZy1yjlv-k
- Install MTK drivers
- Click on Flash_tool.exe
- Select "scatter-Loading" and search MT8173_Android_scatter.txt
- Press "recovery" and add path (choose) recovery file - TWRP 3.2.3
- Select "Download Only"
- Turn off your tablet and wait some seconds
- Press “Download” button in FlashTool programm to start
- Connect your tablet into the computer via USB data cable holding volume + button (do not press power button!).
- The process will start and a red progress bar will appear after color purple, yellow. Finally, green circles should display.
That's all. Now you should flash TWRP: hold buttons “power+Vol +” at startup, choose recovery mode with Vol+ button, valid with Vol- (alike in step 1)
If you face Error message like this:
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
Obtain DRAM Failed!
Please check your load matches to your target which is to be downloaded.
Do this steps: choose scatter load -> load TWRP file ->[/B ]Push download button -> plug in the usb cable without pushing volume up
Step 3
Now it is required to format internal storage to be displayed properly (you will see 0 mb storage size). Just go to wipe section and choose "wipe data" option (write "yes" on keybord and accept).
After this reboot recovery ( go to reboot section -> reboot recovery)
Step 4
Connect tablet to PC and copy Magisk package to internal storage (Magisk should be flashable via TWRP in .zip format and can be found in appropriative thread). I've succesfully installed Magisk v17.1.
Afterwards, go to install section -> install package and reboot device (no wipes after installation are required). If it will ask for installing TWRP app , just cancel that.
All above-described actions should be fully completed, sure nothing is missed ! Because in this case your tablet will not boot!
So, that's all ! Let me know if you face any issues. Enjoy
Custom ROMs for TWRP can be found here:
Modified stock ROM - https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM - https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (stable!) - https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM - https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
>> P.S. In the nearest future I will release some custom ROM'S for our device, at least Stock ROM for flashing via TWRP with ROOT added.
This will be amazing - THANK YOU!
Thank you for your tuto.
I want to put your asus rom in my teclast T8.
On my computer flash tool don't seems to work. I have a screen sp flash tool is loading and then, nothing.
I am on Win10 and try all compatibility mods and admin mod..
Any idea ?
naonilio said:
Thank you for your tuto.
I want to put your asus rom in my teclast T8.
On my computer flash tool don't seems to work. I have a screen sp flash tool is loading and then, nothing.
I am on Win10 and try all compatibility mods and admin mod..
Any idea ?
Click to expand...
Click to collapse
Try to install drivers for win 10 from: https://forum.xda-developers.com/showthread.php?t=1982587. For me it works perfectly on win 7,8. But it is recommended to use version of SP flashtool I attached here for our device.
Sword900 said:
Try to install drivers for win 10 from: https://forum.xda-developers.com/showthread.php?t=1982587. For me it works perfectly on win 7,8. But it is recommended to use version of SP flashtool I attached here for our device.
Click to expand...
Click to collapse
Looks that this issue is caused by very unfortunate folder naming in zip archive. Remove "," from folder names and you should be fine . Just remember to do that also for folder T8 TWRP RECOVERY - otherwise you will face "scatter file invalid" error later.
hello sword900,
i have downloaded your mtkflash tool but i have always an issue with the download of your recovery to the tablet.
every time, i have an flash error 4051 dram or so.
i have many tried this with different mtk drivers and disabling windows driver signature but it wont work.
after that i have installed the last official firmware V2.01-A921.
the installation was successful and that approved that my setup is ok.
i think there is a mistake between the recovery file and the scatter information.
have you any idea, what i can do to solve this problem?
thanks in advance
dreas
ok, i have found the solution. with an other flash tool and scatter file it works.
now i have tried the asus and stock rom.
it seems to be that the asus rom has gps funktionality. nice!
dreas74 said:
ok, i have found the solution. with an other flash tool and scatter file it works.
now i have tried the asus and stock rom.
it seems to be that the asus rom has gps funktionality. nice!
Click to expand...
Click to collapse
Yeah, this recovery works only on last firmware TOS v2.01. As I know, our device is not supplied with GPS module, so it won't work. Anyway let me know about your experience after testing my ROMs
dreas74 said:
ok, i have found the solution. with an other flash tool and scatter file it works.
now i have tried the asus and stock rom.
it seems to be that the asus rom has gps funktionality. nice!
Click to expand...
Click to collapse
I also solve mi matter with an other flash tool and scatter file !
I am on the asus ROM for the moment and that's working like a charm, thank you for your work.
---------- Post added at 11:04 PM ---------- Previous post was at 11:02 PM ----------
alex.niemnozka said:
Looks that this issue is caused by very unfortunate folder naming in zip archive. Remove "," from folder names and you should be fine . Just remember to do that also for folder T8 TWRP RECOVERY - otherwise you will face "scatter file invalid" error later.
Click to expand...
Click to collapse
I can confirm, I lost probably many thousands of my hairs with that problem !
Tried somebody this solution on 1.10? Will it work, or i have to update to TOS-V2.01-A921?
Teclastt8 said:
Tried somebody this solution on 1.10? Will it work, or i have to update to TOS-V2.01-A921?
Click to expand...
Click to collapse
You can try this but I don't think stock firmware will boot after this. So, you can install twrp and flash custom ROM. Anyway all your data will be lost...
Sword900 said:
You can try this but I don't think stock firmware will boot after this. So, you can install twrp and flash custom ROM. Anyway all your data will be lost...
Click to expand...
Click to collapse
:good: Thank you! I don't want to use the original, I want to use your asus rom, just asked it because i want to know that the 2.01 is necessary or not.
Excuse my bad English!
Another question... if i want back the original 1.10, i only need install it via SP flash tool?
Teclastt8 said:
:good: Thank you! I don't want to use the original, I want to use your asus rom, just asked it because i want to know that the 2.01 is necessary or not.
Excuse my bad English!
Another question... if i want back the original 1.10, i only need install it via SP flash tool?
Click to expand...
Click to collapse
Yeah, you should do firmware upgrade via SP flash tool in this case.
Hi, i have tried to install TWRP for a couple days now on my Teclast T8. Tried several different drivers, scatter-files and Smart Phone Flash Tool. Any hints that i have missed?
Error message with included Smart Phone Flash Tool, scatter and TWRP.
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
Obtain DRAM Failed!
Please check your load matches to your target which is to be downloaded.
Windows 10 10.0.17763
Build Number in Android: TOS V2.01_20180612
MediaTek USB Port (COM3) Driver 3.0.1504.0
pB2NP said:
Hi, i have tried to install TWRP for a couple days now on my Teclast T8. Tried several different drivers, scatter-files and Smart Phone Flash Tool. Any hints that i have missed?
Error message with included Smart Phone Flash Tool, scatter and TWRP.
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
Obtain DRAM Failed!
Please check your load matches to your target which is to be downloaded.
Windows 10 10.0.17763
Build Number in Android: TOS V2.01_20180612
MediaTek USB Port (COM3) Driver 3.0.1504.0
Click to expand...
Click to collapse
Just read some previous posts, it should help. Remove all commas,spaces etc in all folders' names. If not - try to use another scatter file and version of SP flashtool.
Sword900 said:
Just read some previous posts, it should help. Remove all commas,spaces etc in all folders' names. If not - try to use another scatter file and version of SP flashtool.
Click to expand...
Click to collapse
Thanks for replying!
As you can see in this picture i have replaced the spaces in folder and file names.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could you please refer to other scatter files that may work? I have tried with SP flashtool v 5.1824 aswell, but it's the same error there.
If I remember correctly, I did it that way:
scatter load->Twrp load->Push download button->without push volume up, plug in the usb cable
Try this, if nothing else can help.
Teclastt8 said:
If I remember correctly, I did it that way:
scatter load->Twrp load->Push download button->without push volume up, plug in the usb cable
Try this, if nothing else can help.
Click to expand...
Click to collapse
Yeeez... That worked. Thanks a lot.
@Sword900, could you add this in the description for other frustrated people like me?
I have two new T8, when i try to start new instalation latest version of facebook, messenger, instagram apps, apps can not start. App closed, send report or restart it. Not working. Tried with 1.10 and 2.10 firmware but result is the same. Others apps or games are ok. Any idea to fix it? Thank you.
Error
Deleted.
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
Having the same problem. Is there a firmware available online for flashing?
Cedric Miraflor said:
Having the same problem. Is there a firmware available online for flashing?
Click to expand...
Click to collapse
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
ankitnaik16 said:
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
Click to expand...
Click to collapse
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Cedric Miraflor said:
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Click to expand...
Click to collapse
SP Tool work in Download Mode it can be access by pressing volume up + volume down key while phone is off
I see. Im just waiting for somebody with the scatter file for this device
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme ?
RantiHasan said:
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme
Click to expand...
Click to collapse
You Are right Never Buy Realme
I finally went to service center process is too slow and tedious
Going to sell this phone and buy oneplus nord
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
i think realme dont allow you install patched boot when bootloader locked, you should leave bootloader unlocked and never locked it again if you want modified your device.
Same
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Letinamazuki said:
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Click to expand...
Click to collapse
You find solutions
I have same issue. I went to sc and they said they couldn't detect the phone on pc, then they provide one only solution which to replace the whole circuit board
did anyone found any solution?
2021, Please, i want any solution
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
mercan01 said:
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
Click to expand...
Click to collapse
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
erickdiazw said:
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
Click to expand...
Click to collapse
I have the same issue. Did you find any solution?
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
erickdiazw said:
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
Click to expand...
Click to collapse
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
gaduaxe said:
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
Click to expand...
Click to collapse
I'm sorry bro, i have Realme 6 with MediaTek, idk for Qualcomm :c
My phone is completely messed up right now. All I did was flash spark os (A12) over PPUI (A11) and then my phone didn't boot. I flashed that ROM via fastboot flash tool. I think it was the tool which caused this problem. After so many tries, my phone booted but wifi, sound and many other functions aren't working. Then I tried flashing some other ROM but TWRP/Ofox kept giving some "error 7". Then I tried flashing fastboot ROM with 3 versions of Mi flashtool but it keeps giving some kind of CRC flash error. Please help me I'm too much worried right now.
if you flash through fastboot tool do you see any error (if yes then tell us more about the error )if not and rom starts with some issues try flashing the latest firmware
muneeb rizwan said:
if you flash through fastboot tool do you see any error (if yes then tell us more about the error )if not and rom starts with some issues try flashing the latest firmware
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm getting this error continously
move it to c:\
muneeb rizwan said:
move it to c:\
Click to expand...
Click to collapse
now my phone screen has gone black and it won't turn on. Computer still detects it as I'm hearing some sound
I was flashing fastboot ROM using mi flashtool and it gave me error. When I tried to turn on the phone, it didn't turn on. However, when I connect it to PC, the PC makes some sound. What do I do now?
boot your phone into fastboot mode and then connect it to pc and install this rom
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/xiaomi.eu_multi_HMNote10_V12.0.5.0.RKGMIXM_v12-11-fastboot.zip/download
extract the zip file and you will see a file (install for first time) open it and if all goes well it will flash the rom
muneeb rizwan said:
boot your phone into fastboot mode and then connect it to pc and install this rom
https://sourceforge.net/projects/xiaomi-eu-multilang-miui-roms/files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv12/xiaomi.eu_multi_HMNote10_V12.0.5.0.RKGMIXM_v12-11-fastboot.zip/download
extract the zip file and you will see a file (install for first time) open it and if all goes well it will flash the rom
Click to expand...
Click to collapse
I can't even boot into fastboot mode. Screen stays black no matter what key combo I try
The following steps should put your phone into fastboot.
1) Phone off
2) Connect the USB cable to the computer (not the phone for now)
3) Hold the volume down button only
4) Still hold and connect the USB cable to the phone
Now the telefo should start fastboot mode.
StaryMuz said:
The following steps should put your phone into fastboot.
1) Phone off
2) Connect the USB cable to the computer (not the phone for now)
3) Hold the volume down button only
4) Still hold and connect the USB cable to the phone
Now the telefo should start fastboot mode.
Click to expand...
Click to collapse
Didn't work. I guess EDL mode is my last hope now.
Starting EDL mode can be a problem. At present, perhaps EDL cables no longer work and if the phone does not allow you to enter the EDL by key combinations, the only test points left are on the phone's motherboard. With test points, the question is whether the correct points have already been found. The manufacturer does not inform about them.
What driver is loaded in Windows when the phone is connected?
So the test points are already known:
It works by disconnecting the battery to completely shut down the hardware. Conductively connect the test points (tweezers, scissors) and with the points connected, connect the USB cable plugged into the PC. This activates the EDL mode (sometimes only very briefly). You need to have MiFlash running beforehand and use "refresh" and "Flash" right away. If nothing happens, probably the EDL mode has already been switched off again.
For flash in EDL mode you can normally use MiFlash with ROM for fastboot.
If the Qualcomm HS-USB QDLoader 9008 Windows driver is loaded, this is the EDL mode.
StaryMuz said:
For flash in EDL mode you can normally use MiFlash with ROM for fastboot.
If the Qualcomm HS-USB QDLoader 9008 Windows driver is loaded, this is the EDL mode.
Click to expand...
Click to collapse
I wonder how did my phone boot into edl mode although I never opened its back cover.
And right now the problem is that Mi Flashtool is showing some edl authentication error. How do I resolve that?
First, it is very important to call things by their correct name, otherwise misunderstandings and mistakes in procedure can arise. What do you mean "Mi Flahtool"?
You should have used this:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
I think the flashtool version of 2017 works without any problem, coz, recently I unbricked my Poco x2 with this version of flashtool. The latest versions of flashtools are getting errors. And move the flash files to C: partition mandatory
StaryMuz said:
First, it is very important to call things by their correct name, otherwise misunderstandings and mistakes in procedure can arise. What do you mean "Mi Flahtool"?
You should have used this:
https://www.xiaomiflash.com/downloads/MiFlash20181115.zip
Click to expand...
Click to collapse
That's exactly what I used. I even tried the latest version but still no luck.
Shibu Shaji said:
I think the flashtool version of 2017 works without any problem, coz, recently I unbricked my Poco x2 with this version of flashtool. The latest versions of flashtools are getting errors. And move the flash files to C: partition mandatory
Click to expand...
Click to collapse
No matter which version I try, it always gives this error and asks for id and password. And when I enter that, nothing happens.
Bro, connect to a VPN , change the language of auth window and bind your mi account details there. And give it a try on tool version 2017.4.25... If nothing works go for edl.
munimjaffer said:
No matter which version I try, it always gives this error and asks for id and password. And when I enter that, nothing happens.
View attachment 5504363
Click to expand...
Click to collapse
munimjaffer said:
No matter which version I try, it always gives this error and asks for id and password. And when I enter that, nothing happens.
View attachment 5504363
Click to expand...
Click to collapse
Bro, use the same version of flash tool that I mentioned above.. 2017.4.25 with flash all command.
Hello all, I've been trying to install /e/ os GSI on my Redmi Note 11S. I already unlocked the bootloader.
Whenever i tried flashing system.img, (with boot.img patched manually via fastboot, not via a custom recovery), the phone would only boot fastboot. So I tried installing this custom recovery, and patch boot.img from there, but that still wouldn't work (though the recovery at least worked). So I tried installing the stock ROM, and try something else.
I went with latest fastboot EEA image and ran flash_all.sh (worked last time I tried), but this time I got an error (something about partition preloader not found). So I restarted the phone after which it got stuck in this bootloop. Can't boot into fastboot, nor recovery. Instead, the phone keeps flashing the mi logo on and off every 5 seconds. fastboot on my Linux install can't detect the phone. My Windows 10 install can't find it either, though it plays the "device connected" sound followed by the "device disconnected" sound shortly after. I can't turn the phone off either. Windows 10 USB drivers worked, or at least when I was unlocking the bootloader, so I don't think the issue is there. Any idea how to fix this?
Thank you in advance
Edit: Typos. Also I noticed that it only plays the "device connected" and "disconnected" sounds on Windows 10 only when i hold down the power and vol- buttons.
UPDATE: This tool can at least detect the phone, though I do get this error afterwards:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
UPDATE: Managed to get FASTBOOT back, thanks to this kind stranger (system is still unbootable).
UPDATE: IT'S ALIVE! Did a quick install_all.sh on the stock ROM, and it's working again! Thank you all for helping me resolve this problem
no idea
Normally you use flashall.bat and not .sh, try using flashall.bat and hopefully you'll get out of the bootloop.
Try following my "how to fix bootloop" guide again, atleast till step 4 when you get the fastboot mode back up again.
warhead1721972 said:
Normally you use flashall.bat and not .sh, try using flashall.bat and hopefully you'll get out of the bootloop.
Try following my "how to fix bootloop" guide again, atleast till step 4 when you get the fastboot mode back up again.
Click to expand...
Click to collapse
Could you send a link to the guide please? The only guide I could find on your profile is the one with the rooting, which is among the first guides I tried and it was the one to get me into this situation. Note that in your guide, it appears that you can at least get to the FASTBOOT screen, which I can't. My phone just stays on the logo for 5 seconds before rebooting, and no matter which buttons I press or hold, I can't get it to go to the FASTBOOT screen.
Also, what's the difference between flash_all.bat, and flash_all.sh, aside of one being for Linux and the other for Windows?
UPDATE: This tool can at least detect the phone, though I do get this error afterwards:
kritomas said:
Could you send a link to the guide please? The only guide I could find on your profile is the one with the rooting, which is among the first guides I tried and it was the one to get me into this situation. Note that in your guide, it appears that you can at least get to the FASTBOOT screen, which I can't. My phone just stays on the logo for 5 seconds before rebooting, and no matter which buttons I press or hold, I can't get it to go to the FASTBOOT screen.
Also, what's the difference between flash_all.bat, and flash_all.sh, aside of one being for Linux and the other for Windows?
Click to expand...
Click to collapse
Press and hold all the 3 buttons, vol +, vol - and power button at the same time, till you see the phone switched off for a few seconds.
Then press the power and vol - button to get to the fastboot mode.
About the flashall.bat, I completely forgot that you were using Linux my bad.
Also sometimes some drivers don't work well in Linux try using windows.
Did you follow the guide which was at the end of this?
warhead1721972 said:
Press and hold all the 3 buttons, vol +, vol - and power button at the same time, till you see the phone switched off for a few seconds.
Then press the power and vol - button to get to the fastboot mode.
About the flashall.bat, I completely forgot that you were using Linux my bad.
Also sometimes some drivers don't work well in Linux try using windows.
Did you follow the guide which was at the end of this?
Click to expand...
Click to collapse
Yes, that's the one, and it won't go into fastboot.
Isn't /e/ Murena GSI just android 10? I am pretty sure it won't work. I had the same problem, but I fixed it by installing stock ROM..
And that /e/ GSI is not actively developed and not even in beta stage (not usable at most cases)
Don't use SP Flash tool for full flash this phone seriously, Sp flash tool will make your phone stuck in recovery miui and show Nvdata Corrupted even you choose download only mode.
for now try to use mtkclient to flash boot.img only to both side A&B.
move your boot.img to mtk client folder
open cmd on that folder
type this command:
Code:
python mtk w boot_a,boot_b boot.img,boot.img
and try turn on your phone.
if still can't boot try to flash one by one img from your firmware
I has your same problem. Just hold the vol- for more than your usually Need and should boot into fastboot and than you flash with flashall.bat
I've sucessfully restore my phone and work as normal.
soutaminori said:
Don't use SP Flash tool for full flash this phone seriously, Sp flash tool will make your phone stuck in recovery miui and show Nvdata Corrupted even you choose download only mode.
for now try to use mtkclient to flash boot.img only to both side A&B.
move your boot.img to mtk client folder
open cmd on that folder
type this command:
Code:
python mtk w boot_a,boot_b boot.img,boot.img
and try turn on your phone.
if still can't boot try to flash one by one img from your firmware
Click to expand...
Click to collapse
Thank you so much, it worked!!!
I think. It's now at least on the FASTBOOT screen, which is progress. And the MIUI recovery is now back as well. While the system is still unbootable, I think I can take it from here. Thank you
Hypeka said:
I has your same problem. Just hold the vol- for more than your usually Need and should boot into fastboot and than you flash with flashall.bat
I've sucessfully restore my phone and work as normal.
Click to expand...
Click to collapse
That's the first thing I tried, and no luck. But I fixed it now (I think).
Very welcome, Glad to hear that
Note for everyone:
Backup this partition it's very important.
nvcfg.img, nvdata.img, nvram.img, persist.img, proinfo.img, protect1.img, protect2.img, md1img.img
Thats all partition about imei, security and network configuration for ur device. CMIW.
mtkclient also can do that,
and it's the clue:
Code:
python mtk r nvcfg,nvdata,nvram,persist,proinfo,protect1,protect2,md1img nvcfg.img,nvdata.img,nvram.img,persist.img,proinfo.img,protect1.img,protect2.img,md1img.img
Check ur mtk client folder, now you got the back up.
u can also use this Partitions Backup & Restore this tool don,t need PC for backup and restore, but i'm not really sure can be work perfectly. i just try for boot partition and its worked.
cheeerrss
Hi. Could you help me to unbrick my Note 11S 4g? I faced with bootloop after trying rooting phone by twrp. And now i can`t enter to fastboot.
When i try to - python mtk w boot_a,boot_b boot.img,boot.img
Or when I try to disable auth brom i have another one issue.
alzhuks said:
Hi. Could you help me to unbrick my Note 11S 4g? I faced with bootloop after trying rooting phone by twrp. And now i can`t enter to fastboot.
When i try to - python mtk w boot_a,boot_b boot.img,boot.img
Or when I try to disable auth brom i have another one issue.
Click to expand...
Click to collapse
i can't see mtk client log. but maybe driver problem or try to unlock BL again with THIS TOOL
alzhuks said:
Hi. Could you help me to unbrick my Note 11S 4g? I faced with bootloop after trying rooting phone by twrp. And now i can`t enter to fastboot.
When i try to - python mtk w boot_a,boot_b boot.img,boot.img
Or when I try to disable auth brom i have another one issue.
Click to expand...
Click to collapse
I myself did it with the terminal and on Linux. I didn't use the GUI, so I can't help with that. Could you send a higher res picture of the terminal please? We can't really see anything.
If you're doing this on Windows, then my guess is a driver issue (I did have to install a special driver for Windows to work with Fastboot, could be that mtk needs it too).
Hi All,
I unbricked my phone by using fresh release of mtkclient (https://github.com/bkerler/mtkclient).