OTA update now boot loop - Verizon Samsung Galaxy Note II

a while back I had a friend root my phone, he recently unrooted it and brought me back to stock. Tonight I received an OTA update and clicked ok. it stated to update and then rebooted into the "Samsung" screen with white lettering, but it stays there and the screen flickers.
If I try to boot into recovery it asks if I want to download a custom OS.
Does this mean it wasn't fully unrooted (we thought he took all the steps to unroot)? is there anything I can do? If I bring the phone into verizon will they know if has been rooted and will they even care?
thanks

channeldave said:
a while back I had a friend root my phone, he recently unrooted it and brought me back to stock. Tonight I received an OTA update and clicked ok. it stated to update and then rebooted into the "Samsung" screen with white lettering, but it stays there and the screen flickers.
If I try to boot into recovery it asks if I want to download a custom OS.
Does this mean it wasn't fully unrooted (we thought he took all the steps to unroot)? is there anything I can do? If I bring the phone into verizon will they know if has been rooted and will they even care?
thanks
Click to expand...
Click to collapse
Whats the phone you're talking about?

Sorry, thought I was in the Note 2 forum. It's the Note 2 from verizon.
When I try to bot into recovery it now goes to a screen that says I'm downloading an OS, and at the top it says ODIN.
LS.xD said:
Whats the phone you're talking about?
Click to expand...
Click to collapse

channeldave said:
Sorry, thought I was in the Note 2 forum. It's the Note 2 from verizon.
When I try to bot into recovery it now goes to a screen that says I'm downloading an OS, and at the top it says ODIN.
Click to expand...
Click to collapse
Is it SGH-T889??

SCH-1605
LS.xD said:
Is it SGH-T889??
Click to expand...
Click to collapse

channeldave said:
SCH-1605
Click to expand...
Click to collapse
SCH-i605
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
LS.xD said:
SCH-i605
Click to expand...
Click to collapse
You can flash the stock firmware via Odin to fix it --> LINK

Related

[Q] TWRP to CWM on Verizon Note II

Hi I have TWRP right now and I was wondering how I exactly go to CWM can someone please help me with this?
dgarmo said:
Hi I have TWRP right now and I was wondering how I exactly go to CWM can someone please help me with this?
Click to expand...
Click to collapse
Download the CWM zip and flash it fro TWRP.
dgarmo said:
Hi I have TWRP right now and I was wondering how I exactly go to CWM can someone please help me with this?
Click to expand...
Click to collapse
Install ROM Manager (https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en) and select 'Flash ClockworkMod Recovery'. All done!
lol didnt think it was that easy thanks guys!!!http://forum.xda-developers.com/images/smilies/redface.gif
computerslayer said:
Install ROM Manager (https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en) and select 'Flash ClockworkMod Recovery'. All done!
Click to expand...
Click to collapse
I did this and went into recovery and it comes up a yellow triangle and says system software not authorized by verizon, please bring your phone to a verzion store........
---------- Post added at 12:28 AM ---------- Previous post was at 12:22 AM ----------
mike6200 said:
I did this and went into recovery and it comes up a yellow triangle and says system software not authorized by verizon, please bring your phone to a verzion store........
Click to expand...
Click to collapse
And now every time i try to turn on my phone it wont. It just goes to the yellow triangle and says that again. PLEASE help. By the way im rooted useing the stock rom
mike6200 said:
I did this and went into recovery and it comes up a yellow triangle and says system software not authorized by verizon, please bring your phone to a verzion store........
---------- Post added at 12:28 AM ---------- Previous post was at 12:22 AM ----------
And now every time i try to turn on my phone it wont. It just goes to the yellow triangle and says that again. PLEASE help. By the way im rooted useing the stock rom
Click to expand...
Click to collapse
Probably gonna have to Odin something man. So you can't pull battery then... power home and volume up? That's when you get the triangle?
blackbass595 said:
Probably gonna have to Odin something man. So you can't pull battery then... power home and volume up? That's when you get the triangle?
Click to expand...
Click to collapse
Pulled bat and tried to odin the stock root rom and comes back up with triangle again
Deleted, wrong thread!
Bad advice. See post below.
mike6200 said:
Pulled bat and tried to odin the stock root rom and comes back up with triangle again
Click to expand...
Click to collapse
Check this out. Adam is one of the biggest resident experts on this device and it looks like he has a way out for your problem:
AdamOutler said:
Q. Why won't my phone start? why is it saying unauthorized software?
A. You unlocked, flashed something, then relocked. You need to flash back to stock VRALJB then repeat the unlock procedure. Use this guide http://forum.xda-developers.com/showthread.php?t=2040264
Click to expand...
Click to collapse
computerslayer said:
Check this out. Adam is one of the biggest resident experts on this device and it looks like he has a way out for your problem:
Click to expand...
Click to collapse
That worked
mike6200 said:
That worked
Click to expand...
Click to collapse
Good news! Thanks for the update.
I hope you don't give up on CWM. I'm a big fan of it myself and was able to flash it from ROM Manager with no problems. Give it another shot now that you have the restore process down!
All good and I have cwm
Sent from my SCH-I605 using xda app-developers app

[link]root vzw galaxy s4 solution

MOD EDIT: Closed for violation of XDA Rules
Hello Everyone Sextape and the Gang Here,
This is a Root Solution For The Samsung Galaxy IV Verizon Variant:
Thanks to our source for this!
LINKREMOVED
​
Like our work go to our site and click an AD it helps ​
DO NOT MIRRROR ANY OF THE FILES PROVIDED BY OUR TEAM "NO MIRRORS ALLOWED" THANKS TO OUR SOURCES YOU GUYS ROCK!!!​
Thanks! it worked! My GS4 is now rooted!
what about the bootloader?
jellydroid13 said:
Thanks! it worked! My GS4 is now rooted!
Click to expand...
Click to collapse
I'm getting "Unable to read directory" when I try to download Odin. Could someone mirror this? And will Odin 3.07 work as well?
wolfgrrl said:
I'm getting "Unable to read directory" when I try to download Odin. Could someone mirror this? And will Odin 3.07 work as well?
Click to expand...
Click to collapse
I used 3.07 and it worked fine -- You can also navigate to the updated rwilco12 repository, which is here: http://www.rwilco12.com/downloads.php?dir=Files/Misc Files
eiddor said:
I used 3.07 and it worked fine -- You can also navigate to the updated rwilco12 repository, which is here: http://www.rwilco12.com/downloads.php?dir=Files/Misc Files
Click to expand...
Click to collapse
I found that after I posted Thanks for the reply tho! How do you like your rooted S4?
wolfgrrl said:
I found that after Iposted Thanks for the reply tho! How do you like your rooted S4?
Click to expand...
Click to collapse
Well, I've only used it to run Root Explorer and to fire up Titanium Backup, but so far, so good!
jellydroid13 said:
Thanks! it worked! My GS4 is now rooted!
Click to expand...
Click to collapse
Help!! I rooted my phone and everything worked fine and then I rebooted and now I have an unauthorized software warning and the phone is locked. How can I unroot and return to stock
? I assume I can through ODIN but where do I find the stock firmware??
cjkacz said:
Help!! I rooted my phone and everything worked fine and then I rebooted and now I have an unauthorized software warning and the phone is locked. How can I unroot and return to stock
? I assume I can through ODIN but where do I find the stock firmware??
Click to expand...
Click to collapse
Here is the stock firmware: http://forum.xda-developers.com/showthread.php?t=2289325
---------- Post added at 07:54 AM ---------- Previous post was at 07:49 AM ----------
jellydroid13 said:
Thanks! it worked! My GS4 is now rooted!
Click to expand...
Click to collapse
Have you rebooted yet?
wolfgrrl said:
Here is the stock firmware: http://forum.xda-developers.com/showthread.php?t=2289325
---------- Post added at 07:54 AM ---------- Previous post was at 07:49 AM ----------
Have you rebooted yet?
Click to expand...
Click to collapse
Holy crap thanks man! Worked and I'm up and running. Scared me though! I guess I'll wait a while to root/unlock this thing
cjkacz said:
Holy crap thanks man! Worked and I'm up and running. Scared me though! I guess I'll wait a while to root/unlock this thing
Click to expand...
Click to collapse
You're welcome And I'm a lady :silly:
wolfgrrl said:
You're welcome And I'm a lady :silly:
Click to expand...
Click to collapse
I'm sorry should have known by the name. Duhhh Thanks again!
Sent from my SCH-I545 using Tapatalk 2
cjkacz said:
Help!! I rooted my phone and everything worked fine and then I rebooted and now I have an unauthorized software warning and the phone is locked. How can I unroot and return to stock
? I assume I can through ODIN but where do I find the stock firmware??
Click to expand...
Click to collapse
i got that as well, but only in between loading the kernal and flashing su. I didn't reboot like it asked, i just continued flashing su then let the motochopper script reboot for me, so i'm all good it seems for now.
Thanks so much for the info sextape!!!
edit. nm, it showed up again, but i'm not going to reboot until i have the stock firmware downloaded. I wonder if i freeze SEAndroid, if that would prevent the warning.
As I stated yesterday, I'd be very impressed if we had a working root method by today (when I should be receiving my device this evening). Low and behold, color me impressed. SXTP you are truly a legend good sir! :good:
cjkacz said:
Help!! I rooted my phone and everything worked fine and then I rebooted and now I have an unauthorized software warning and the phone is locked. How can I unroot and return to stock
? I assume I can through ODIN but where do I find the stock firmware??
Click to expand...
Click to collapse
By "unauthorized software warning" do you mean the little triangle in the notification bar and the message saying "Device detected an application attempting unpermitted access" and asking you to reboot? That is because you have USB debugging checked in developer options. There is another option below that says Verify apps via USB, it's grayed out so I can't uncheck it, BUT if you freeze SEAndroid 1.0 with TiBu the warning goes away.
mikebuck69 said:
By "unauthorized software warning" do you mean the little triangle in the notification bar and the message saying "Device detected an application attempting unpermitted access" and asking you to reboot? That is because you have USB debugging checked in developer options. There is another option below that says Verify apps via USB, it's grayed out so I can't uncheck it, BUT if you freeze SEAndroid 1.0 with TiBu the warning goes away.
Click to expand...
Click to collapse
Initially I got that but then the phone rebooted and a warning came in the screen and said that unauthorized software has been detected please take your phone to the nearest Verizon retailer. The phone would not go past that screen
Sent from my SCH-I545 using Tapatalk 2
i have the debug checked in development settings but when I plug it into the computer it does not say that debug mode is on like it did with the s3 so how do i know if it is or not.
cjkacz said:
Initially I got that but then the phone rebooted and a warning came in the screen and said that unauthorized software has been detected please take your phone to the nearest Verizon retailer. The phone would not go past that screen
Sent from my SCH-I545 using Tapatalk 2
Click to expand...
Click to collapse
Odd, I've rebooted a few times and haven't had that happen. I tried rebooting with the warning and it took me to the samsung splash screen with the unlocked padlock and it said "recovery loading" and tried to do a software update. I managed to hit the power button and stop that from happening. Not sure WHAT would have happened if that had completed.
mikebuck69 said:
Odd, I've rebooted a few times and haven't had that happen. I tried rebooting with the warning and it took me to the samsung splash screen with the unlocked padlock and it said "recovery loading" and tried to do a software update. I managed to hit the power button and stop that from happening. Not sure WHAT would have happened if that had completed.
Click to expand...
Click to collapse
Yeah I was actually using the phone for about 10 minutes. Last thing i was doing was playing with goo app. I am coming from a gnex and rooted/unlocked via wugfresh toolkit. I assume that eventually someone will make one for this phone? (Once the bootloader is unlocked)
Sent from my SCH-I545 using Tapatalk 2
do i reboot in between installing the kernel and running the motochopper

Teamwin looping after hitting the verizon OTA update button

Hey all i accidentally hit the OTA update "OK" button when it popped up on my screen. I've been deferring it for the past few months but my finger slipped and hit the "OK" instead of the "defer" and choosing a date to ask again.
I have a looping "Teamwin" logo and it keeps looping.. Cant seem to do anything. I've taken out the battery and then start it up but it still does the same thing.
Any advice, step by step to get out of this loop?
Thanks!
David
you can not OTA update with a custom recovery...time for a date with Odin.
Historical coodsen
droidstyle said:
you can not OTA update with a custom recovery...time for a date with Odin.
Click to expand...
Click to collapse
Would you care to give me a link to do this with a note 2, droidstyle?
yep click the link in my sig...refer to section 1b. you can probably get away with using root66 so you do not have to reroot and unlock BL.
Also when you get back up and running I would recommend freezing SDM1.0 apk with a App such as Titanium back up pro and you will no longer get prompted for OTA updates.
---------- Post added at 05:09 PM ---------- Previous post was at 05:05 PM ----------
hold on a sec, can you boot into recovery? If so you can probably wipe data and re flash the rom you were on.
droidstyle said:
yep click the link in my sig...refer to section 1b. you can probably get away with using root66 so you do not have to reroot and unlock BL.
Also when you get back up and running I would recommend freezing SDM1.0 apk with a App such as Titanium back up pro and you will no longer get prompted for OTA updates.
---------- Post added at 05:09 PM ---------- Previous post was at 05:05 PM ----------
hold on a sec, can you boot into recovery? If so you can probably wipe data and re flash the rom you were on.
Click to expand...
Click to collapse
Whats the key combo to see if i can boot into recovery and ill try it
droidstyle said:
yep click the link in my sig...refer to section 1b. you can probably get away with using root66 so you do not have to reroot and unlock BL.
Also when you get back up and running I would recommend freezing SDM1.0 apk with a App such as Titanium back up pro and you will no longer get prompted for OTA updates.
---------- Post added at 05:09 PM ---------- Previous post was at 05:05 PM ----------
hold on a sec, can you boot into recovery? If so you can probably wipe data and re flash the rom you were on.
Click to expand...
Click to collapse
I just did the Power+home button+volume up and i get a "WARNING!!!!"
a custom os can cause critical problems......
If you want to download a custom OS, etc etc..
stealthrt said:
I just did the Power+home button+volume up and i get a "WARNING!!!!"
a custom os can cause critical problems......
If you want to download a custom OS, etc etc..
Click to expand...
Click to collapse
That's download mode...pull battery and start over.
pwer+home+volume down gets you into recovery.
droidstyle said:
That's download mode...pull battery and start over.
pwer+home+volume down gets you into recovery.
Click to expand...
Click to collapse
Well i just started flashing in odin.... will update when its done.
Doesnt look like obin did anything. after it finished it just rebooted and i still have the teamwin loop.
stealthrt said:
Doesnt look like obin did anything. after it finished it just rebooted and i still have the teamwin loop.
Click to expand...
Click to collapse
And doing the volume down+home+power sends me to the same screen (WARNING!!!... custom os.. etc etc)
Any other advice?
stealthrt said:
Any other advice?
Click to expand...
Click to collapse
he accidentally told you to hit the same button combo. its volume UP home and power. probably still wont boot into recovery though
B_I_N_G_E said:
he accidentally told you to hit the same button combo. its volume UP home and power. probably still wont boot into recovery though
Click to expand...
Click to collapse
Yeah it still does the same teamwin loop doing it that way.
What else can i try?
stealthrt said:
Yeah it still does the same teamwin loop doing it that way.
I tried again to flash and it still is at the loop after a restart...
and also...
What else can i try?
Click to expand...
Click to collapse
did you have the right pda file? for instance was your phone updated to vrall4 or vramc3 and you chose the vraljb file?
B_I_N_G_E said:
did you have the right pda file? for instance was your phone updated to vrall4 or vramc3 and you chose the vraljb file?
Click to expand...
Click to collapse
ive only tried the root66 rom.
stealthrt said:
ive only tried the root66 rom.
Click to expand...
Click to collapse
if you had an updated firmware then that file wouldnt work for you. i also noticed though you put that file in the bootloader field instead of the pda field when you tried flashing it one of those times. that may have been a bad thing. you could try to flash the other file marked vramc from that thread.
B_I_N_G_E said:
if you had an updated firmware then that file wouldnt work for you. i also noticed though you put that file in the bootloader field instead of the pda field when you tried flashing it one of those times. that may have been a bad thing. you could try to flash the other file marked vramc from that thread.
Click to expand...
Click to collapse
Alright i flashed the bootloader and all seems to be fine. I got 2 tutorials mixed up so i though one was using bootloader as the ROM.
All is good now thanks droidstyle and B_I_N_G_E.
B_I_N_G_E said:
if you had an updated firmware then that file wouldnt work for you. i also noticed though you put that file in the bootloader field instead of the pda field when you tried flashing it one of those times. that may have been a bad thing. you could try to flash the other file marked vramc from that thread.
Click to expand...
Click to collapse
root66 works on all devices with the current firmware since it does not contain a bootloader, recovery, or wipe data. Sometimes it will cause a bootloop which all that is needed is to wipe data in recovery.
---------- Post added at 10:01 AM ---------- Previous post was at 09:59 AM ----------
stealthrt said:
Doesnt look like obin did anything. after it finished it just rebooted and i still have the teamwin loop.
Click to expand...
Click to collapse
you need to boot into recovery and wipe data...if you can get into recovery the a full odin package will need to be flashed such as stock VRAMC3. However it looks like you figured it out.

[Q] Potentially Soft bricked

I recently rooted my s4, hoping that I could put kitkat on it. I found that I couldn't just flash a rom with rom manager, so I installed safestrap, and I put 10.2 and a 11 nightly onto my internal storage. I flashed one of them (idiot me forgot which), and I rebooted. Now, my phone will show "samsung custom" and it will go to a screen that says "safestrap disabled." I can either click "recovery" or "continue." Recovery just brings me to the safestrap menu, but continue brings me to a blue (maybe aquamarine) colored screen that has static green lines and sifting/disappearing pink lines. Please help, I'm really worried I bricked my phone in my idiocy.
EDIT: So now, no matter what, it gets stuck at the "samsung custom" screen. If boot into recovery, It goes to a Verizon unauthorized software page. Is my phone bricked?
Yes...you didn't research at all. Countless threads on this issue.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Did you install the ROM in the stock location in safe strap? You have to Odin it back to stock
Sent from my One using Tapatalk
Barnanator said:
I recently rooted my s4, hoping that I could put kitkat on it. I found that I couldn't just flash a rom with rom manager, so I installed safestrap, and I put 10.2 and a 11 nightly onto my internal storage. I flashed one of them (idiot me forgot which), and I rebooted. Now, my phone will show "samsung custom" and it will go to a screen that says "safestrap disabled." I can either click "recovery" or "continue." Recovery just brings me to the safestrap menu, but continue brings me to a blue (maybe aquamarine) colored screen that has static green lines and sifting/disappearing pink lines. Please help, I'm really worried I bricked my phone in my idiocy.
EDIT: So now, no matter what, it gets stuck at the "samsung custom" screen. If boot into recovery, It goes to a Verizon unauthorized software page. Is my phone bricked?
Click to expand...
Click to collapse
Wow..OK..
Did you make a backup of your stock ROM first?? And also where did you install these ROMs into... A ROM slot or the stock slot???
Sent from my unknown using Tapatalk
Barnanator said:
I recently rooted my s4, hoping that I could put kitkat on it. I found that I couldn't just flash a rom with rom manager, so I installed safestrap, and I put 10.2 and a 11 nightly onto my internal storage. I flashed one of them (idiot me forgot which), and I rebooted. Now, my phone will show "samsung custom" and it will go to a screen that says "safestrap disabled." I can either click "recovery" or "continue." Recovery just brings me to the safestrap menu, but continue brings me to a blue (maybe aquamarine) colored screen that has static green lines and sifting/disappearing pink lines. Please help, I'm really worried I bricked my phone in my idiocy.
EDIT: So now, no matter what, it gets stuck at the "samsung custom" screen. If boot into recovery, It goes to a Verizon unauthorized software page. Is my phone bricked?
Click to expand...
Click to collapse
No. It is not bricked. Why on earth would you try to install a CM ROM on a Safestrap phone?
LoL no aosp ROMs for you. You can get it back though
Sent from my unknown using Tapatalk
Mistertac said:
LoL no aosp ROMs for you. You can get it back though
Sent from my unknown using Tapatalk
Click to expand...
Click to collapse
How do I fix it?
Barnanator said:
How do I fix it?
Click to expand...
Click to collapse
What build were you on? Odin a matching full wipe tar
Sent from my SCH-I545 using Tapatalk
douger1957 said:
No. It is not bricked. Why on earth would you try to install a CM ROM on a Safestrap phone?
Click to expand...
Click to collapse
I didn't do enough research.
Barnanator said:
I didn't do enough research.
Click to expand...
Click to collapse
So you installed that ROM onto to safe stock side in safestrap? I'm thinking you did.. But just wondering. And did you make a backup before you did anything? Safe strap is designed to be really safe... And if u do install anything to the stock slot you need to be extra careful and make sure you have a backup. Like josh said.. Probably the best bet now is to just Odin the stock firmware back on that phone. Not really hard just look in the development section you'll see ODIN
Sent from my unknown using Tapatalk
decaturbob said:
Yes...you didn't research at all. Countless threads on this issue.
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'd appreciate if you could point me in the direction of one of those threads.
joshm.1219 said:
What build were you on? Odin a matching full wipe tar
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Could you perchance tell me how to do that
Barnanator said:
I'd appreciate if you could point me in the direction of one of those threads.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2448726
http://forum.xda-developers.com/showthread.php?t=2606501
Most of the ROM developers have fairly explicit instructions on what the requirements are for their ROMs. Others take the approach that you should do some homework before you do something that will potentially turn your $600 phone into a paperweight.
At any rate, you're not the first nor will you be the last. Live and learn.
---------- Post added at 09:47 PM ---------- Previous post was at 09:44 PM ----------
Barnanator said:
Could you perchance tell me how to do that
Click to expand...
Click to collapse
Do you know what build you were on? Go to Settings>About Phone. Scroll to the build information. We need the last three characters of that build - two letters and a number that start with a "M."
douger1957 said:
http://forum.xda-developers.com/showthread.php?t=2448726
http://forum.xda-developers.com/showthread.php?t=2606501
Most of the ROM developers have fairly explicit instructions on what the requirements are for their ROMs. Others take the approach that you should do some homework before you do something that will potentially turn your $600 phone into a paperweight.
At any rate, you're not the first nor will you be the last. Live and learn.
---------- Post added at 09:47 PM ---------- Previous post was at 09:44 PM ----------
Do you know what build you were on? Go to Settings>About Phone. Scroll to the build information. We need the last three characters of that build - two letters and a number that start with a "M."
Click to expand...
Click to collapse
I think something like me7
Barnanator said:
I think something like me7
Click to expand...
Click to collapse
Follow the directions. I can't hold your hand because I've never done it. I have just a little experience with ODIN. There's another thread in the development forum that tells you how to do it for the MK2 base. There's a bit more detail on the directions. You can try the MK2 .tar file but the instructions say that might not work.
That will take your phone back to the way it was when it came out of the box. I'd strongly suggest you leave it like that until you've done your homework.
Here's a hint to help you out. Most everything you might need to know is on the first page of each forum. All of the latest and greatest information will be there, including the bugs and the workarounds.
Barnanator said:
I'd appreciate if you could point me in the direction of one of those threads.
Click to expand...
Click to collapse
this forum is loaded with helpful threads
http://forum.xda-developers.com/galaxy-s4-verizon/general

T-Mobile rooted?

Did any of those who already got the device tried or planning to try and root?
I read that T-Mobile is bootloader unlocked but didn't hear about anyone who did it yet.
Sent from my SM-G900T using xda premium
is knox still present?
I believe it will break knox but I did the same on my sgs5 (and sgs4), never had a problem to "jump" to the next device. Some apps (like tasker) are must for me so I'll have to root.
For those who got the device this weekend - No one rooted yet?
Sent from my SM-G900T using xda premium
I think most who have gotten it are still in awe and don't dare risk a mess up yet. Gotta wait for a proper tmo Dev community. I get mine tomorrow but ill wait for others to test a good method
once chainfire announces a root for the t mobile versions, thats all you will need; there is nothing better..
wase4711 said:
once chainfire announces a root for the t mobile versions, thats all you will need; there is nothing better..
Click to expand...
Click to collapse
Did you mean this announcement? https://plus.google.com/+Chainfire/posts/dQboK6jQsQX
gilbnx said:
Did any of those who already got the device tried or planning to try and root?
I read that T-Mobile is bootloader unlocked but didn't hear about anyone who did it yet.
Sent from my SM-G900T using xda premium
Click to expand...
Click to collapse
i managed to pass the nandroid write thing on odin but it doesnt boot to recovery. it is stuck on the samsung logo. so im bricked until there is an odin stock to flash or a new root update
XxSilent.NightmarexX said:
i managed to pass the nandroid write thing on odin but it doesnt boot to recovery. it is stuck on the samsung logo. so im bricked until there is an odin stock to flash or a new root update
Click to expand...
Click to collapse
Did it say success or NANDROID WRITE START!
Try to reboot into Odin mode and use this version of Odin instead of the one Chainfire packed:
http://www.rwilco12.com/Files/Misc Files/Odin3/Odin3 v3.10.6.zip
Should go into the AP slot. If this doesn't fix it, let me know. I'll take responses to this on Twitter and Hangouts to help get you back up and running.
gilbnx said:
Did you mean this announcement? https://plus.google.com/+Chainfire/posts/dQboK6jQsQX
Click to expand...
Click to collapse
yep, that would be it!
garwynn said:
Did it say success or NANDROID WRITE START!
Try to reboot into Odin mode and use this version of Odin instead of the one Chainfire packed:
http://www.rwilco12.com/Files/Misc Files/Odin3/Odin3 v3.10.6.zip
Should go into the AP slot. If this doesn't fix it, let me know. I'll take responses to this on Twitter and Hangouts to help get you back up and running.
Click to expand...
Click to collapse
it said passed with a green light using 10.6 which made my phone to stay stuck on the samsung logo screen. doesnt even do the boot animation. its just at the very first initial screen. i shouldnt have done he ota. kinda mad at myself for that lol
edit: i also tried it with the link you provided and it is still on the s6 edge logo.
XxSilent.NightmarexX said:
it said passed with a green light using 10.6 which made my phone to stay stuck on the samsung logo screen. doesnt even do the boot animation. its just at the very first initial screen. i shouldnt have done he ota. kinda mad at myself for that lol
edit: i also tried it with the link you provided and it is still on the s6 edge logo.
Click to expand...
Click to collapse
Just connect it to kies and start over....
Sent from my SM-N915V

Categories

Resources