Hello there i need some help this is what happened.
I had this phone with purple screen so i download the room and flash it tru the sd card with the method of the buttoms (voluime up+ volumne - and power) the phone start doing the proces finish but never boot up it stay on a black screen.
After a while checking what when wrong i find out that i flashed a wrong firmware i used y210-0100 when i had to use y210-0151, so i download the new sofware and tried again but this time the phone does not go in to the flash mode wiith the botom (or any other mode)at least does not show nothing on the screen.
Right now the phone vibrates when i turn it on but does not show nothing on the screen only a black screen adb system in the computer recognize the phone but only when i conected in recovery mode (but nothing shows in the screen).
I have tried to flash it again with adb but nothing has work yet even thought to flash it tru the sdcard with adb but nohting has work yet, actually i am not an expert with the adb thing maybe you can recomend some comands that may work.
When i trien comands like "fasrboot -w" adb says waitng for device and get stuck there forever also with "fasboot flash file" or something likes that
So i will like to know if some one has any suggestion please let me know it may help me to fix this problem.
Y210-0100 Black Screen
Same thing happen to me after upgrading. HELP!!!
Related
Hi everyone,
Yesterday I made a Radio update to version 63.18.55.06_6.35.07.08. I made it putting the update.zip (radio rom) file in the SD Card.
All worked fine until the htc hero restarted (after appears the box with the orange arrow). Thereafter the Hero only shows the Hero logo when I turn on.
I tried to init the fastboot pressing home+power and home+back+power buttons (without SD Card and without SIM card) but always the result is the same, the logo appears and nothing happens.
The computer doesn't detects the Hero's USB connection and I can't run adb commands because it raises the "device not found" error.
Someone can help me?
Thanks in advance!
Did you let the screen with the box run its course?
Did the recovery console come back up saying formatting cache?
Have you tryed holding just back+power? ive never heard of using back+home+power
And also, i think your supposed to enter recovery with the sd in.
If that works then in that state is should be found by adb.
But yes, as the poster before me said, it should show the "unpacking" image, and then it should reboot. It should then go straight back into the recovery and the recovery will format the cache. If you tryed to turn it off at any point then, then something is badly mucked up. But it isnt bricked, and probably can be saved. Its only bricked when no logos at all come up on boot. If you managed to get it reconised by adb, you could probs format the cache manualy, though i dont know the command
All the previous steps after the breack are as you say, but after the "unpacking" image, the htc hero restarted and showed the hero logo instead the correct menu.
The problem with the adb is that the computer doesn't recognize the htc hero across usb. When I write the adb command ("adb devices") doesn't displays any device, and I can't run any adb shell for the same reason. How can I run any adb command if the device isn't recognized by the computer?
Have you tryed just taking the battery out, waiting 30 seconds, putting it back in, then booting the phone holding back+power?
And adb is very strange i find... Sometimes it reconises a phone, sometimes it doesnt, for no apparent reason. Have you tryed leaving it on the hero logo for a while then running adb commands?
If he has flashed, wouldnt the USB Debugging setting be reset also, wouldnt this be why he cannot access via adb.
Hi.
I habe exactly the same problem. I have updated radion.
Now ther come only the T-Mobile Logo and that's all.
I can not enter neither Recovery Mode nor fasbtoot does do something.
Any suggestions?
Lado
this problem shud be fixed asap because i think its a threat for all hero modders and owners as our phones get killed at anytime with this process. so guys lets try to find a solution for this problem. cheers
Updated Radio to 63.18.55.06JU_6.35.09.26 and it killed my hero.
first the box with the orange arrow came up and then the whole phone died... now it wont even turn on the screen.
please fix?????????????????
I had the box with the orange arrow yesterday after flashing radio.
The phone isn't dead, I think it's just working.
I kinda paniced also when it happend but I got into recovery eventually.
When you flash a radio it does not actually install that image until your first boot (when you see that phone out the box image).
At this point DO NOT DO ANYTHING WITH THE PHONE just wait and it will install the image and reboot for you. IT CAN TAKE UP TO 10 MINUTES.
If you turn it off or otherwise interrupt this process it can really mess up your phone. however the general rule is so long as you can see the HTC logo when you turn on i.e. it still turns on you can in theory always recover, its just a matter of finding the way that works.
Hi, i've a strange (but i hope common and resolvable) problem.
After all, i say that i searched through the forum (with the search function) but with the solution that i found and tried i didn't solve anything.
I start saying that i got a p500 with a broken sdcard reader board (it simply doesn't have a microsd 'cause doesn't recognize).
That phone some days ago just shut down and went stuck on the LG Logo.
I tried at first the hard reset (home+vlm down+pwr), nothing happens.
I tried then the recovery mode and try to update with lg updater, and didn't work, lg doesn't recognize the phone on the updater (but on the main screen of the BBc app does).
The last thing that i noticed is that one time, powering on the phone, button's leds flashed about 4-5 times. but if i try to re-do the action, doesn't get anymore.
I would know if there is another way to exit from this stuck-screen.
I also post the log of error i get from kdz:
Upgrade error
WParam: 100
LParam: 500
Here is the log: http://pastebin.com/4SECdaT4
Other things i forgot to say:
I don't need to shake the phone, if kdz doesn't detect, i take off the battery, and turn on the phone in emergency mode (up+back+pwr).
Sometimes kdz works without that error, but it reboots the phone and it stucks again in the lg silver logo.
I read about a wipe of /system through adb, but if i try to mound /system, i get the command list.
I can't do adb devices, doesn't detect the phone, and in sequence to this, can't open the adb shell.
any suggestion?
You recovery got corrupt when it was stuck on LG logo, which could be easily solved by fastboot method of recovery flashing.
I was on the same situation like you are on now. Now follow this:
Try booting into fastboot mode by pressing "Power+ home buttons"
If it does then notify me here or at PM.
Between this is not the appropriate section for this thread.
I tried to fastboot, i did fastboot erase recovery and fastboot flash recovery recovery.img commands, no errors, but when i type fastboot reboot, on the screen i read: rebooting the device, but it doesn't reboot. If i take off the usb cable, (after a big time, 10 mins for example), a --suspend-- appears.
if i take off the battery, the lg logo is stuck again, and if i do home+vol down+pwr the clockwork mod doesn't appear.. any suggestion?
See your PM
Sent from my LG-P500 using Tapatalk
Hello guys. I have samsung i8552. I tryied to install cwm on it and after that to install new rom. I flashed cwm recovery using odin. But now the problem is that my phone cant enter recovery. When i press home+power+volume+ keys, black screen appears, like phone is bricked. But when i pull battery out, and try to boot device, device can boot normaly, but still cant enter in recovery. I tryied to install stock recovery, but its same problem, black screen every time i try to enter in recovery. I tryied flashing recovery with odin many times, also check-uncheck auto reboot button didnt work. I can provide information about device that might help.
GT-i8552, Version: i8552zcang1 . My phone also have arround 2gb internal memory total, so i think that is model that was made for China and Taiwan market. And ye one more thing, i can enter in download mode and my pc can reconize my phone, even odin can.
Pls any ideas?
Did you try if "adb reboot recovery" still works?
( You might also be able to fix it by flashing with fastboot if the recovery UI is a goner, but I didn't try around with that myself yet )
When i use "adb reboot recovery" its reboot my phone, but nothing then black blank screen
Any other solution?
Guys i know that this phone isnt popular, but pls help me.
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.