My new Xperia Z2 touch screen sensitivity seems to be too sensitive. I applied Sony Xperia Z2 Screen Protector GLAS.tR NANO SLIM and it is very good one. The problem is the screen registered finger hovering as a touch!! I don't even touch the screen, just hovering it, it seems to press by itself. By using Style Cover Stand SCR10 - Sony for Z2, it get even worse. The screen touches the cover while I am walking, sometimes it changes music and calls someone too. This is very hard to use. While I talk on the phone, the cover touches the number and sometime touches at End Call. I have checked the Glove mode, and it is always Turned off. I asked Xperia Care, they suggested that, I need to turn off the Glove Mode, and turn off, Double Tab to wake. I did them, but the issue is still occurred. I have updated firmware to the newest one, the problem is still occurred. Has anyone encounter the same issue as I have? If you have, can you solve it? if so how to do so?
Please help me.
Thank you very much
You could try going to settings > accessibility and then at the bottom change touch and hold delay to medium or long. Might make a difference.
Thank you very much for your suggestion. i will try it =]
Do you have ever have this issue before? i just wonder that, this over sensitive is due to the screen itself, or the glass protector
nattaburud said:
Thank you very much for your suggestion. i will try it =]
Do you have ever have this issue before? i just wonder that, this over sensitive is due to the screen itself, or the glass protector
Click to expand...
Click to collapse
I've had it were I've accidentally exited apps or tapped on something by mistake as the screen was too sensitive. That setting seems to have made a difference though...unless I'm just more aware of the problem so make a conscious effort not to leave my fingers hovering over the screen. I've not tried the phone without a screen protector so can't say if this has made any difference or not.
Thank you very much =]
Well I've not notice an improvement with different screen protectors. Started with a Spigen antiglare one and have a Roxfit antifingerprint one on now. Same sensitivity.
Sent from my D6503 using XDA Premium 4 mobile app
prazvt said:
Well I've not notice an improvement with different screen protectors. Started with a Spigen antiglare one and have a Roxfit antifingerprint one on now. Same sensitivity.
Sent from my D6503 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Does it registers as a touch when you hovering your finger above home button / apps?
in my case, just hovering it, it registered as a touch =[
nattaburud said:
Does it registers as a touch when you hovering your finger above home button / apps?
in my case, just hovering it, it registered as a touch =[
Click to expand...
Click to collapse
Yup it does unfortunately.
Do you have, by any chance, a third party launcher installed? My screen sensitivity was messed up with Nova Launcher, had to uninstall it.
Just dont :/
raducanmihai said:
Do you have, by any chance, a third party launcher installed? My screen sensitivity was messed up with Nova Launcher, had to uninstall it.
Click to expand...
Click to collapse
Hello, remove any laucher you have till new update of the firmware it will definitely bug your phone :/
I'm using stock launcher. Yeah I hope Sony fixes this with their next update - and hopefully they are aware of it.
Check you don't have "gloves mode" switched on. I had that on and I think it increases sensitivity so when hovering it registers. I've since turned it off and seems to work fine. Settings, display, glove mode.
Hope it helps
Sent from my D6503 using XDA Free mobile app
I just ordered this screen protector. Should have it in a few days. Will post back to see if im also having this issue.
strongylad28 said:
Check you don't have "gloves mode" switched on. I had that on and I think it increases sensitivity so when hovering it registers. I've since turned it off and seems to work fine. Settings, display, glove mode.
Hope it helps
Sent from my D6503 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you very much for your reply =]
I have turned it off, but the sensitivity is still the same =[.
heatl0rd said:
I just ordered this screen protector. Should have it in a few days. Will post back to see if im also having this issue.
Click to expand...
Click to collapse
Thank you very much =] Please Post Back, I really want to know =]
i
nattaburud said:
My new Xperia Z2 touch screen sensitivity seems to be too sensitive. I applied Sony Xperia Z2 Screen Protector GLAS.tR NANO SLIM and it is very good one. The problem is the screen registered finger hovering as a touch!! I don't even touch the screen, just hovering it, it seems to press by itself. By using Style Cover Stand SCR10 - Sony for Z2, it get even worse. The screen touches the cover while I am walking, sometimes it changes music and calls someone too. This is very hard to use. While I talk on the phone, the cover touches the number and sometime touches at End Call. I have checked the Glove mode, and it is always Turned off. I asked Xperia Care, they suggested that, I need to turn off the Glove Mode, and turn off, Double Tab to wake. I did them, but the issue is still occurred. I have updated firmware to the newest one, the problem is still occurred. Has anyone encounter the same issue as I have? If you have, can you solve it? if so how to do so?
Please help me.
Thank you very much
Click to expand...
Click to collapse
it s not problem i think
cause i had same experience on Galaxy S3 cause it was super responsive & sensitive
then after few month weeks i got it.
then on note2 and s4 didn't have same problem
and i think ur problem is same like mine.
ur finger will get how to use phone
:good:
x102x96x said:
it s not problem i think
cause i had same experience on Galaxy S3 cause it was super responsive & sensitive
then after few month weeks i got it.
then on note2 and s4 didn't have same problem
and i think ur problem is same like mine.
ur finger will get how to use phone
:good:
Click to expand...
Click to collapse
thank you for your suggestion =] i am now trying to used to it =]
heatl0rd said:
I just ordered this screen protector. Should have it in a few days. Will post back to see if im also having this issue.
Click to expand...
Click to collapse
Hi, Have you tried with screen protector yet? do you have screen sensitivity issue like mine?
Thank you very much
Hey mate sorry I forgot to get back to you.
Yes I'm using the protector ans no, no issues at all. Everything's fine.
Related
Is there any way to change the sensitivity of the proximity sensor. It seems every screen protector I try makes the screen turn off when in a call even without anything near the sensor. I had to cut one of the screen protectors to get around it (but had messed up a corner when applying so I replaced it)
Or is there a way to completely disable it so I just have to hit the power button when in a call to manually turn the screen on or off.
+1
Dont have the same problem but would be helpful.
There is a distance setting in the build.prop file. You could try adjusting that and seeing if that helps.
Sent from my MB860 using XDA Premium App
Perfect. Changed the value (increased it from default of 60) and its working great now. Thanks for that tip.
Sent from my MB860
Well after further testing seems that it didn't fix the problem. Seemed to work when I first made the changes but now the screen is stroll turning off and no matter what I change the value to I can't get the proximity sensor to work right.
Spectre51 said:
Well after further testing seems that it didn't fix the problem. Seemed to work when I first made the changes but now the screen is stroll turning off and no matter what I change the value to I can't get the proximity sensor to work right.
Click to expand...
Click to collapse
According to the official Atrix manual -
http://www.motorola.com/staticfiles...s/StaticFiles/Atrix_US-EN_UG_68014798001B.pdf
Note: Your touchscreen might
stay dark if the sensor just
above it is covered. Don't use
covers or screen protectors (even clear ones) that
cover this sensor. To find Motorola accessories for
your phone, visit www.motorola.com/products.
Anyway, why do you guys keep using the screen protectors with this gorilla glass phones? I have carried Moto Milestone in my pocket for a year and D2G for 3 months and there are no scratches on them whatsoever.
I use them on every phone I get because although it is gorilla glass it can still get scratches under the right conditions and I for one do not want my $400+ phone to have a scratch on the screen. Never had a phone that had issues like this with screen protectors and the proximity sensor. Multiple iPhones, Dell streak, nexus one, droid, galaxy s. I've tried two different screen protectors with the atria and both have this issue.
I'm having issues with my proximity sensor too, but it seems that I can't make it turn off the screen when I'm talking. I'm not using any screen protector but I do have a case. It was working fine till a week ago but now I just have to block the phone every time I get a call.
The only difference is that I've installed 2 new games, maybe those are affecting the sensor?
Another thing that isn't working anymore is the auto brightness that's always set to minimum, no matter the light conditions. The phone is online for 260+ hours already (had it go to 500+ before but had to turn it off to add a micro sd card, just to be sure it would find it).
Spectre51 said:
I use them on every phone I get because although it is gorilla glass it can still get scratches under the right conditions and I for one do not want my $400+ phone to have a scratch on the screen. Never had a phone that had issues like this with screen protectors and the proximity sensor. Multiple iPhones, Dell streak, nexus one, droid, galaxy s. I've tried two different screen protectors with the atria and both have this issue.
Click to expand...
Click to collapse
Ugh... thing is if you drop your phone, it could crack both with screen protector and without one. If you grind the screen against your keys, it will get scratched through the protective film.
If you use it normally - the chance of scratching it really small. Just my 2 cents.
xploited said:
Ugh... thing is if you drop your phone, it could crack both with screen protector and without one. If you grind the screen against your keys, it will get scratched through the protective film.
If you use it normally - the chance of scratching it really small. Just my 2 cents.
Click to expand...
Click to collapse
My wife's phone had a screen protector on and got scratched by being in her purse. The actual screen though had no marks. The screen protectors help. Obviously each incident is different but they can help prevent some damage so in my opinion they are worth it.
Sent from my MB860
Hi there,
Got the same trouble..... but I just noticed it work fine at the sun (outdoor)..... turn the screen off in the shadow..... and switch on in the sun....
so I think a light adjustment has to be done.... but where ?...
Thanks to developers
when I'm reading web page, and I'm scrolling up or down, the tablet randomly ZOOMS right in to part of the page i'm on. Often to a section that I'm not even reading. Is this a known issue? Am I doing something wrong?
thanks, hopefully someone knows what I'm talking about cuz it's driving me crazy!!
This happens to me sometime, all I can say is that the touch screen is too sensitive, I have to make sure that my finger doesn't stay on the screen to long.
Yeah the screen seems to have a sensitivity issue.
I'm just sayin!
princeasi said:
Yeah the screen seems to have a sensitivity issue.
I'm just sayin!
Click to expand...
Click to collapse
Can't say it'a an issue, this happens to ipad and Samsung Galaxy tablet as well when I tried my friends' devices.When you get used to your device, this will happen less.
Kermit33 said:
Can't say it'a an issue, this happens to ipad and Samsung Galaxy tablet as well when I tried my friends' devices.When you get used to your device, this will happen less.
Click to expand...
Click to collapse
Hopefully this is the case. Then I'll less likely feel this is a problem isolated to my unit.
I'm just sayin!
princeasi said:
Then I'll less likely feel this is a problem isolated to my unit.
Click to expand...
Click to collapse
The Sony S is super sensitive to quiver-fast double taps and finger jiggles (that you may not know you are doing.) Pretty sure that you'll get used to it and, even without thinking about it, simply adjust your browsing method. Takes a day or so to get beyond it.
Well, I've got my tablet for a few months now and I think every day that this is a pain in the ass. Regarding this issue I love the ipad. Or my galaxy s. Neither of them have this issue.
Gesendet von meinem Sony Tablet S mit Tapatalk
kramdens said:
when I'm reading web page, and I'm scrolling up or down, the tablet randomly ZOOMS right in to part of the page i'm on. Often to a section that I'm not even reading. Is this a known issue? Am I doing something wrong?
thanks, hopefully someone knows what I'm talking about cuz it's driving me crazy!!
Click to expand...
Click to collapse
Did you put a screen protector on the screen without removing the factory one? I did at first and was having the same issue as you. Couldn't even type a message because it kept double tapping letters i was trying to type and scrolling while browsing sucked.
I took off the one I put on and just have the factory one now and, though it still happens some times, it is definitely better than it was before.
anurbanlegend said:
Did you put a screen protector on the screen without removing the factory one? I did at first and was having the same issue as you. Couldn't even type a message because it kept double tapping letters i was trying to type and scrolling while browsing sucked.
I took off the one I put on and just have the factory one now and, though it still happens some times, it is definitely better than it was before.
Click to expand...
Click to collapse
Yeah I had to do this same thing. The extra screen protector desensitized the hell out of tablet S. I've taken it off and it's much better, but still double taps at times on 1 tap.
I'm just sayin!
anurbanlegend said:
Did you put a screen protector on the screen without removing the factory one? I did at first and was having the same issue as you. Couldn't even type a message because it kept double tapping letters i was trying to type and scrolling while browsing sucked.
I took off the one I put on and just have the factory one now and, though it still happens some times, it is definitely better than it was before.
Click to expand...
Click to collapse
The salesman at the sony store put it on for me. So im not sure. I'd like to this he dd it properly.
I truly believe my tablet is defective. The problem I mentioned above plus horrible and slow scrolling, widgets disappearing, widgets freezing. Etc....
My tablet has been a lot better since I removed the protective film covering the screen. The cover was kinda thick. Now the colors are brighter and the viewing angle is better. I like the texture of the glass too.
I also don't notice the "ghost touches" that would happen right after I'd touch the screen, kind of like a double tap. Those were few and far between, but I've been enjoying my tablet sans protector enough, that this is just a bonus.
I'm not guaranteeing it, but this might fix your issue. You could also try replacing it with a thinner protector. My nook color's touchscreen was crazy without a protector, maybe this tablet is the opposite.
---
It also sounds like you could use a factory reset. I was having issues with my tablet being crappy and slow, and after doing a factory reset, freezing the unneeded apps (pretty much all of the Sony ones), disabling the media scanner, and applying the V6 supercharger script OOM values, my tablet has been pretty snappy.
I've been using the new Go Launcher HD home app in place of the default launcher which I froze (aka disabled the package).
Wait, there is a screen protector coming with the tab? I purchased the sony screen protector and put it on. So I've got two protectors on it?
Gesendet von meinem Sony Tablet S mit Tapatalk
k.bergmann2 said:
Wait, there is a screen protector coming with the tab? I purchased the sony screen protector and put it on. So I've got two protectors on it?
Gesendet von meinem Sony Tablet S mit Tapatalk
Click to expand...
Click to collapse
Same with me, my tablet came with a free protector and the shop put it on for me. I am not sure if there is one already there as some insisted here but I have no sensitivity issue even if there are two screen protectors!
Yes it has a protector on it. It is very tough to keep the screen from getting cracked. To remove it, start at one of the corners with your fingernail. I used the bottom rounded corners to start. At first the screen will feel a little rough, but that's from the adhesive. Clean it with sone electronics spray and a microfiber cloth.
I like mine better with out it. The screen feels like glass now instead of plastic.
Yes..the tablet comes with a screen protector preinstalled which you can see if you look closely at the edge of the screen.
Sent from my Sony Tablet S using XDA Premium HD app
Here's a thread with pictures and info on how to remove the factory screen protector...
http://forum.xda-developers.com/showthread.php?t=1501144
screen protector
I have the same touch sensitivity problems on my Tablet S (16GB WiFi) purchased in Singapore. Frequent hypersensitive touch behavior leading to random zooming and double taps, 'stickiness' in scrolling menus etc.
I read about the factory installed screen protector here on XDA but was unsuccessful in removing it...couldn't even get the edges to come off. Went down to the local Singapore Sony Service center and asked them to take a look at the hypersensitive touch issue...and what do you know...I couldn't reproduce it on the spot. Tried for 15 min, but the tablet behaved perfectly during the period . Couldn't convince the service tech that something was wrong.
Anyway, i asked them to remove the factory supplied screen protector and they said it should NOT be removed since it's not merely a protector, but a necessary part of the display for improving color reproduction and decreasing glare. Don't know if he was BSing me, but I left it at that. Note the image on this official website under the 'Sony’s amazing TruBlack™ display' section...
[EDIT: Looks like I cannot post a URL as a new user. Please check the Sony Singapore Tablet S official website]
I bought the official Sony screen protector (matte type) and had them install it. The sensitivity is much better now and the frequency of random zoom and double-tap has decreased drastically; but it's still there and pops up occasionally.
I am unsure of what to do next. Could it be a software issue? Among the browsers, I notice that it is most prominent/frequent in Opera Mobile. Occurs less frequently in the stock browser.
Today, I noticed that we have a possibility to set the sensibilty in our settings. Just go to input help (probably not the correct word... mine is german. It's the setting with the hand as a symbol). Within, there is a setting called something like touchscreen gestures. My tablet was default set to short. I changed it and now I don't experience the zoom issue anymore.
Gesendet von meinem Sony Tablet S mit Tapatalk 2
k.bergmann2 said:
Today, I noticed that we have a possibility to set the sensibilty in our settings. Just go to input help (probably not the correct word... mine is german. It's the setting with the hand as a symbol). Within, there is a setting called something like touchscreen gestures. My tablet was default set to short. I changed it and now I don't experience the zoom issue anymore.
Gesendet von meinem Sony Tablet S mit Tapatalk 2
Click to expand...
Click to collapse
It's Touch n Hold Delay under Accessibility and default setting is Short.
I have no screen sensitivity problem on my tablet with extra screen protector on (I'm not sure if there is one factory installed on my tablet until today) so this function is useless to me
Hmm it seems that the touch and hold adjustment worked for me so far. Nice find!
Sent from my Sony Tablet S using Tapatalk 2
I've noticed that the touch screen will sometimes press before I actually touch it. How can I decrease sensitivity. I'm using CleanRom Developer Edition 1.2.
Yes! I've had this same problem too! No answer for you, though.
I believe I've had this all along, on GB, ICS, and a variety of ROMs, so I'm afraid it may be a hardware issue. But, I'm no expert...
Thanks. Definitely no reason to go to the GNexus (Ugghh). I've heard that screen protectors help so I ordered some to try that out.
swbf2lord said:
Thanks. Definitely no reason to go to the GNexus (Ugghh). I've heard that screen protectors help so I ordered some to try that out.
Click to expand...
Click to collapse
I have a screen protector and this still happens. I never tried it without a screen protector so I don't know how much of a difference it will make
Surely there is a way to fix this. Maybe in the build.prop?
Sent from my ICS'd Rezound
Strangly im having a very sensitive touchscreen to. Especially when trying to use my keyboard. Ive calibrated as well
thanks
Use a screen protector. Helps.
Ordered screen protectors, they come in Monday. This is really the only issue I have with the device. If it's something that the phone just ships with I'm fine with it. If not, I'm wondering if I should return due to a faulty touch sensor.
GrayTheWolf said:
Use a screen protector. Helps.
Click to expand...
Click to collapse
I have a lcd protector on and it doesnt help at all.
I have set up many rezounds for our company and the strange thing is that this oversensitive behavior you are reporting is happening with completely stock phones as well. I've noticed it with 3 different Rezounds. Very strange behavior indeed. Complete resets of the phones doesn't seem to help. I rooted one and did a complete reflash of the phone and the problem went away. It's almost like the flash went wrong somehow, but very strange to see from a phone that came directly from Verizon brand new.
Personally I like the sensitivity. I would rather a nice light touch be registered then having to mash my finger on the screen. Makes typing easier.
*Madmoose* said:
I have set up many rezounds for our company and the strange thing is that this oversensitive behavior you are reporting is happening with completely stock phones as well. I've noticed it with 3 different Rezounds. Very strange behavior indeed. Complete resets of the phones doesn't seem to help. I rooted one and did a complete reflash of the phone and the problem went away. It's almost like the flash went wrong somehow, but very strange to see from a phone that came directly from Verizon brand new.
Click to expand...
Click to collapse
Thanks so much. I don't care so much as long as it's a device flaw that's not localized. Can it be fixed in any way?
GrayTheWolf said:
Personally I like the sensitivity. I would rather a nice light touch be registered then having to mash my finger on the screen. Makes typing easier.
Click to expand...
Click to collapse
It's not a light touch. I've checked, it sometimes registers just above the touch screen.
I have yet to have the sensitivity be a problem... Maybe yall came from different phones than me
Sent from my Dinc... I mean Rezound
My rezound is completely stock/ not rooted/flashed or anything, I've noticed this since the day I got it in Nov. sometimes my fingers can be a few mm above the screen and it registers a touch. sometimes it doesn't bother me but sometimes if my finger is slightly above the search button and it registers it while i'm trying to do something else, it's pretty annoying
Stock, Rooted...
I've never seen this issue. The screen is very sensitive, but not any different from my previous phone (Orig Droid Incredible).
GrayTheWolf said:
Personally I like the sensitivity. I would rather a nice light touch be registered then having to mash my finger on the screen. Makes typing easier.
Click to expand...
Click to collapse
Same. The sensativity is more like the iPhone. I hate to say it, but I loved the iPhone for that. I used to type so fast. Then I got my first android phone and had to slow down because it didn't seem to always register my input. The rezound I can type really fast again.
Sent from my ADR6425LVW using XDA
I almost thought it was telepathy.
Sent from my ADR6425LVW using Tapatalk 2
GrayTheWolf said:
Personally I like the sensitivity. I would rather a nice light touch be registered then having to mash my finger on the screen. Makes typing easier.
Click to expand...
Click to collapse
I agree with this as well. I do notice it's way sensitive. I remember a few times where it registered a touch and I completely swore I never touched the screen. Anyway it doesn't bother me one bit.
I think it's way to sensitive.
Sometimes when I move my finger pass the screen it presses the button. It doesn't happen all the time tho. Just 10% of my typing, which is also happening now.
Thank you for your time.
Sent from my GT-I9300T using XDA
weird, the default touch sensitivity is normal. may be either its not suiting your taste or your previous mobile is les sensitive.
Feels alright to me, but apparently Gorilla Glass 2 being thinner helps increase sensitivity.
bala_gamer said:
weird, the default touch sensitivity is normal. may be either its not suiting your taste or your previous mobile is les sensitive.
Click to expand...
Click to collapse
Maybe you're right, as I can from the N8. How ever when I try to touch a specific key ONCE it gives me doubled press. And I think this should not happen.
Sent from my GT-I9300T using XDA
a lot of folk here in Thailand seem to get this problem too
they said it's like xperia sola floating touch but worse
I suspect batch product replacement coming soon
I've noticed that it's very sensitive too.
On the s2 people were saying the sensitivity is too low. Now ppl are saying its too high...
Sent from my GT-I9300 using Tapatalk 2
The OFFICIAL samsung said my hands were dry with caused extra static (in Thailand it's a bit cold and dry despite that it's a rainy season, maybe it's the air-con)
and that they recommended applying Vasline to my hands prior to use... which seemed to be pointless, that's a lil too much of "Design for Humans" don't ya think lol
I wish i could readjust the sensitivity like I could with my Acer Iconia Tab A500
Mine does the ghost pressing too sometimes. It isn't often, but my finger hovering over the display will activate it.
Sent from my GT-I9300
I tried the touchscreen with both latex and vinyl gloves and it works perfectly, so I guess it's really sensitive.
if you think it's very sensitive for you, then you can apply screen guard to reduce the touch screen sensitivity.
Hope this will help you..
exorcistz said:
if you think it's very sensitive for you, then you can apply screen guard to reduce the touch screen sensitivity.
Hope this will help you..
Click to expand...
Click to collapse
already did.. not seems to thick enough it seems
Mine is also too sensitive. I noticed same symptoms like others in this thread after I applied screen protector prom PURO which is really really thick .
On the package it guarantees that it does not reduce touch sensibility... I guess they don't lie
I guess I need to find cheaper one
can you calibrate the screen?
maybe itll help.
can you calibrate the screen?
Click to expand...
Click to collapse
Ok, how do you do that? Do I need external app?
cubespeed said:
Ok, how do you do that? Do I need external app?
Click to expand...
Click to collapse
no it might be under touch settings. I am not next to my phone and im on a rom but it might be there somewhere.
i dont have ICS though.
ddurandSGS3 said:
no it might be under touch settings. I am not next to my phone and im on a rom but it might be there somewhere.
i dont have ICS though.
Click to expand...
Click to collapse
I only found gyro calibration and did that. I'm also on rom (Omega - ICS) but did not see anything on stock either. I remember on SGS2 there was option to calibrate where you had to touch corners and center.
It's not that annoying, at first I thought that it might be a feature - air touch
Or it might be that my screen protector does the opposite - increase sensibility. In any case I need to get new one because this one is not clear (its a bit matte) and colors don't show up correctly.
Hi - If I touch the screen *very* gently, it doesn't register as a touch.
Does anyone else have this? If your P9000 is OK, please let me know.
Most of the time it's OK, but it's extra annoying when I'm swiping a long word which gets split into two smaller words. I do have the screen protector on - Obviously I don't want to remove it just for testing, but I realise it might be affecting sensitivity.
Over the years I've had ~5 phones with capacitive touchscreens. This is the first I can touch without it the phone 'realising'.
Thanks, Richard
PS - I've enabled the 'Show touches' in Developer options. The accuracy is fine, it's just it's not quite sensitive enough.
theonlyrick said:
Hi - If I touch the screen *very* gently, it doesn't register as a touch.
Does anyone else have this? If your P9000 is OK, please let me know.
Most of the time it's OK, but it's extra annoying when I'm swiping a long word which gets split into two smaller words. I do have the screen protector on - Obviously I don't want to remove it just for testing, but I realise it might be affecting sensitivity.
Over the years I've had ~5 phones with capacitive touchscreens. This is the first I can touch without it the phone 'realising'.
Thanks, Richard
PS - I've enabled the 'Show touches' in Developer options. The accuracy is fine, it's just it's not quite sensitive enough.
Click to expand...
Click to collapse
i have similar problem because the glass folie is on the phone. Im sure because i used without too... but I rather use like this..
So the screen protector made your screen less sensitive?
What phone do you have? The Elephone P9000?
nsx82 said:
i have similar problem because the glass folie is on the phone. Im sure because i used without too... but I rather use like this..
Click to expand...
Click to collapse
theonlyrick said:
So the screen protector made your screen less sensitive?
What phone do you have? The Elephone P9000?
Click to expand...
Click to collapse
yes, i have glass screen protector on my p9000 and it makes the digitizer less sensitive..
Thanks NX82. That's good news and bad news !
I want to have a screen protector, but sometimes the phone doesn't recognise/acknowledge gentle taps on the screen.
I'll try one other screen protector, if that doesn't work, I'll ask Amazon to replace it.
Cheers, R.
nsx82 said:
yes, i have glass screen protector on my p9000 and it makes the digitizer less sensitive..
Click to expand...
Click to collapse
theonlyrick said:
Thanks NX82. That's good news and bad news !
I want to have a screen protector, but sometimes the phone doesn't recognise/acknowledge gentle taps on the screen.
I'll try one other screen protector, if that doesn't work, I'll ask Amazon to replace it.
Cheers, R.
Click to expand...
Click to collapse
Yes. my screen also less sensitive with the screen protector, but i dont want to scratch the phone, so i rather use with the screen protector.. for me the less sensitive areas are around the edges of the protector.. but i can live with this problem. I know if i remove it gonna be okay again.. maybe possible to put a thinner folie on the screen and thats gonna be better. the protector glass is a little bit thick. probably this is the problem.
I also experienced a reduction in sensitivity after applying a glass screen protector. Without it phone always reacted okay, but with my protector the first miliseconds of my touch aren't registered it seems. I have more trouble typing and sometimes swiping lags. I have adjusted my usage and can live with it now though.
Yes a screen protector can make it less sensitive. But all I did was download this : https://play.google.com/store/apps/details?id=br.shop4apps.touchscreenbooster.com
And then set it to super optimised and make sure it runs at boot and problem solved.
Android-UK said:
Yes a screen protector can make it less sensitive. But all I did was download this : https://play.google.com/store/apps/details?id=br.shop4apps.touchscreenbooster.com
And then set it to super optimised and make sure it runs at boot and problem solved.
Click to expand...
Click to collapse
It's working for me, thanks! :good:
Hi - I tried that, it didn't make any difference... Unless it needs a reboot after changing the settings?
Did you use it on your Elephone?
R.
Android-UK said:
Yes a screen protector can make it less sensitive. But all I did was download this : https://play.google.com/store/apps/details?id=br.shop4apps.touchscreenbooster.com
And then set it to super optimised and make sure it runs at boot and problem solved.
Click to expand...
Click to collapse
Hmmmm... I've just tried reinstalling it.
No joy for me. Sensitivity is no different.
I set multipoints to maximum of 2 and rebooted but it's allowing 3.
I live in hope, though!
theonlyrick said:
Hi - I tried that, it didn't make any difference... Unless it needs a reboot after changing the settings?
Did you use it on your Elephone?
R.
Click to expand...
Click to collapse
Hi. Yes I'm using it on my elephone p9000 right now. I didn't need a reboot tbh. So not sure. Could be a fiffy touchscreen you have in yours?
i installed this app too. i did not resatart the phone. maybe i feel a little difference, but hard to tell if it really helps or not. i have to use few days to tell its placebo or not
Sent from my P9000 using XDA Free mobile app
Well see how it goes and hopefully it does the trick. The p9000 glass isn't anything special. Don't want it to crack or scratch so we need something to protect it.
I have tried several touch calibrarion apps.
It seems like the restart is necessary to apply the new settings.
for me this application gave the best result:
https://play.google.com/store/apps/details?id=redpi.apps.touchscreencalibration
...and i still hoping its not just a placebo effect
Sent from my P9000 using XDA Free mobile app
theonlyrick said:
Hi - I tried that, it didn't make any difference... Unless it needs a reboot after changing the settings?
Did you use it on your Elephone?
R.
Click to expand...
Click to collapse
same here : no effect
I have the same problem but all the above apps don't work for me. I will try to swap my screenprotector for another one tommorow. Hopefully this works.
I've found out/realised that the bottom of the phone is less sensitive than the top, so compare the top and bottom half of the screen.
The top of the screen is *almost* as sensitive as every previous smartphone I've owned or used (mainly Samsungs, HTCs and various iPhones). I can just touch the screen without it registering, but only just.
The bottom of the screen is a lot less sensitive. When selecting (tapping) things, it prob wouldn't be much of an issue, but when I Swype using the 'keyboard', I get dropped letters.
A screen protector reduces sensitivity further (a glass one more than a flexible plastic one, from my experience)
R.
I changed my screen protector for one from gearbest. Now it's working like a charm!
Deepdelver said:
I changed my screen protector for one from gearbest. Now it's working like a charm!
Click to expand...
Click to collapse
Could you link to the exact one please?
Skickat från min P9000 via Tapatalk