so i used odin to flash a c105 firmware on an unlocked c105k in order to get Arabic language for my ant, at the end of the progress it gave me (Fail) and now the phone doesnt boot, although i can go into download mode. i searched for a firmware for c105k but i couldnt find, also Kies is not recognizing the phone. any suggestions are welcomed.
edit: solved by flashing cwm via odin
Related
I have Korean Galaxy S2 (SHW-M250K). Last night i recieved an update message KI06 on kies. I started update.
But after downloading update in PC the update process stuck at 3% while flashing the phone. After an hour i removed cable and tried to do emergency update but it was still stuck at 3%.
I tried to flash KG5 with odin but it was also stuck at FSimage.I tried to download again.
Now my phone can go in download mode but PC cannot recogenize usb. and USB not recogenized message appear.
Please HElP what to do?
Is my phone bricked or there is some way to flash it.
Now my phone can go in download mode
Click to expand...
Click to collapse
Then you aren't bricked.
You'll need to reflash using Odin to what ever firmware you were using.
As long as you can access download mode you aren't bricked. It may be a little difficult to use odin if you never have.. But rest assured, you are not bricked.
I have ODIN mode on my phone but when i connect the USB cable to pc, my PC does not recogenize usb. and yellow pop up message of "USB not recogenized" appears. so i cannot flash it it with ODIN or Kies.
I have to solve this USB problem to proceed. Do you have any suggestion for this.
muhammad.ali123 said:
I have ODIN mode on my phone but when i connect the USB cable to pc, my PC does not recogenize usb. and yellow pop up message of "USB not recogenized" appears. so i cannot flash it it with ODIN or Kies.
I have to solve this USB problem to proceed. Do you have any suggestion for this.
Click to expand...
Click to collapse
Search USB problems .like
USB
http://forum.xda-developers.com/showpost.php?p=16070414&postcount=6
jje
Ok
I am on my way to figure out driver problem.
But there is one more thing.
My orignal firmware was korean. But now after unsiccessfull Odin flash my Download mode Screen and "Firmware update failed" screen has changed to english version. Is there a possibility that Odin curropted my Phone modem .
Also one more thing.
I cannot charge my phone because whenever i connect usb or AC charger the computer and mobile icon with yellow mark appears.
modem has nothing to do with the language settings.
update may have changed the firmware, just go into settings, language and change it back.
Cosmic Blue said:
modem has nothing to do with the language settings.
update may have changed the firmware, just go into settings, language and change it back.
Click to expand...
Click to collapse
Yes it can be changed but right now my phone cannot go past " Firmware upgrade encountered an error. Please select recovery mode in kies and try again" screen.
Also i cannot flash because windows is not detecting my Phone's modem correctly.
Windows does not need to see your modem to flash .
My orignal firmware was korean. But now after unsiccessfull Odin flash my Download mode Screen and "Firmware update failed" screen has changed to english version
Fairly simple answer you have flashed a non korean firmware .
What is this Odin mode on the phone is it Download mode ???
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
I wonder if you have the right instructions to follow ??Or are you flashing a wrong firmware .
Personally i would take to a service centre and tell them Kies broke it .
jje
Ammm, you are flashing an incompatible rom on your phone
You should refer to the [SHW-M250*] Korean Galaxy SII M250S / M250K / M250L Users thread for advice on your phone, the firmwares posted in the link above would not work.
Be careful man
JJEgan said:
Windows does not need to see your modem to flash .
My orignal firmware was korean. But now after unsiccessfull Odin flash my Download mode Screen and "Firmware update failed" screen has changed to english version
Fairly simple answer you have flashed a non korean firmware .
What is this Odin mode on the phone is it Download mode ???
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
I wonder if you have the right instructions to follow ??Or are you flashing a wrong firmware .
Personally i would take to a service centre and tell them Kies broke it .
jje
Click to expand...
Click to collapse
I am not in korea, but i bought this korean version version because it was readily available. so i cannot claim warranty.
achillies400 said:
Ammm, you are flashing an incompatible rom on your phone
You should refer to the [SHW-M250*] Korean Galaxy SII M250S / M250K / M250L Users thread for advice on your phone, the firmwares posted in the link above would not work.
Be careful man
Click to expand...
Click to collapse
I have read all of this forum. and i have korean firmware also. but many people have converted their korean firmware to english one.
But right now i have only one problem
my phone is not being detected by ODIN or Kies because of USB not recogenized problem. I need to solve this for further instructions.
Any one has some different idea????
i have korean firmware also. but many people have converted their korean firmware to english one.
Thats what you want then these many people who have converted will have the instructions or method to convert .
jje
Hi guys,
In need of urgent help, I was following totallydubbed's tutorial on returning the phone to stock as I need a warranty repair.
I tried to flash XXEMA2 firmware for Optus off Sammobile.
Everything was okay until about 75% through the odin flashing process of the stock firmware then I got an error about something not being able to be written.
Now on boot it displays "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
Doesn't connect to kies.
I can get into download mode.
Owen1r said:
Hi guys,
In need of urgent help, I was following totallydubbed's tutorial on returning the phone to stock as I need a warranty repair.
I tried to flash XXEMA2 firmware for Optus off Sammobile.
Everything was okay until about 75% through the odin flashing process of the stock firmware then I got an error about something not being able to be written.
Now on boot it displays "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
Doesn't connect to kies.
I can get into download mode.
Click to expand...
Click to collapse
What error message did you encounter exactly? If you cannot remember and you can get into download mode as you said, did you try to flash again?
I spoke too soon, after spending about half an trying to connect it to kies and reflashing it. All it took was a swap into a USB 3.0 port which reinstalled the drivers and it worked.. Took about a third of the time also.. Strange.
Hello everybody,
I know this question has been asked multiple times, but after Googling for hours and searching in almost every thread about this subject here, I haven't found the solution yet.
What you need to know first
What happened is:
I tried flashing cm11, it went wrong, so I tried it again. Went wrong again. I decided to reboot the device and try it one more time. I couldn't even try that, cause I wasn't be able to go to recovery anymore. Booting into Download mode was possible though. So I decided to flash back to stock trough Odin, but Odin failed (posssibly a corrupted file), leaving me with the:
Phone--- exclamation mark ---PC sign, I wished I never needed to see.
What I tried and what still works is:
*Connecting to PC works (I can't see the files on the player, though). Odin does still recognise the device.
* Because Odin still recognised the device I tried flashing stock back. Odin failed in doing that, so then I tried using the pit file provided. This time Odin hanged at: DO NOT TURN OFF TARGET (please note: Odin on pc said this, player stil showed the phone-exclamation mark-pc sign). After Googling around I found I could just pull the USB cable out and try again, but unfortunately this didn't work.
HELP!!
So my question is: Is it possible for me to recover my international GP 5.0, and if so HOW?
Once again, Sorry for asking this question and thanks in advance.
-BrickedPlayer
P.s. Sorry for my bad English, it isn't my first language
P.P.S I wondered if Unbrickable Mod or OneClick Unbrick work, I'll try them asap (that means: when I have access to a Ubuntu PC, what I haven't now.
My Verizon SCH-1605 Note 2 rebooted and would not boot past the Verizon logo screen!
I have tried to "reload" the Stock Latest Firmware from Samsung, version 4.4.2 VRUFND7 with no luck....
I'm using Odin ver. 3.09. It fails at the beginning sboot.bin FAIL!
I can not get the phone in Recovery Mode, only in the Download mode!
When I try to get it in the Recovery mode it says Samsung Galaxy Note II and loads the logo screen but never completes the boot. I have to pull the battery.
I have been searching all day for a solution. I'm sure someone on this site can help me...
Thanks
Cliff
cjmedina2 said:
My Verizon SCH-1605 Note 2 rebooted and would not boot past the Verizon logo screen!
I have tried to "reload" the Stock Latest Firmware from Samsung, version 4.4.2 VRUFND7 with no luck....
I'm using Odin ver. 3.09. It fails at the beginning sboot.bin FAIL!
I can not get the phone in Recovery Mode, only in the Download mode!
When I try to get it in the Recovery mode it says Samsung Galaxy Note II and loads the logo screen but never completes the boot. I have to pull the battery.
I have been searching all day for a solution. I'm sure someone on this site can help me...
Thanks
Cliff
Click to expand...
Click to collapse
Hi Cliff,
You probably found Droidstyle's Restore guide already, but if not, check it out here: ( http://forum.xda-developers.com/showthread.php?p=34891181 ). It doesn't have restore instructions for 4.4.2, but the general instructions in section 1b will be the same. Try flashing the pit file at the same time as the firmware file if you're not doing that already.
You may also want to try a different version of ODIN if 3.09 isn't working... I've been using version 3.10 most recently with my Windows 7 64bit system and it has worked great.
Here's a Download link for ODIN 3.10.0. **With the newer ODIN versions, they have replaced the "PDA" slot with "AP"--so the .tar firmware file goes into AP in the newer ODIN. **(For reference--Here's the XDA Thread where XDA recognized contributor -CALIBAN666- posted the newer ODIN 3.10 version. Hit the thanks button for him and Droidstyle ****
Also...here's a link to the Verizon stock 4.4.2 firmware if you need it, but I bet you got your file from there already.
---------------
If ODIN doesn't work for you, you might consider trying the Verizon repair utility or Samsung Kies 3 Emergency Firmware Recovery.
Good luck!!
I can not connect to Kies . Drivers are good...can connect to Odin!
Thanks,
When I plug it in a USB port I don't always hear the beep to load the driver but I see the battery charge status symbol, but it always will go in to download mode and Odin see the Comm port.
I tried Odin 3.10 but with out the pit file...it said: sboot.bin
NAND write start!!
Fail!
I can not connect to kies either!
cjmedina2 said:
Thanks,
When I plug it in a USB port I don't always hear the beep to load the driver but I see the battery charge status symbol, but it always will go in to download mode and Odin see the Comm port.
I tried Odin 3.10 but with out the pit file...it said: sboot.bin
NAND write start!!
Fail!
I can not connect to kies either!
Click to expand...
Click to collapse
If ODIN is recognizing the phone, then I would try it with the pit file. Disable all Antivirus programs too and run ODIN as administrator. Also make sure kies is not running in the background. Other common fixes for ODIN problems are to try different usb cables and different usb ports (use a usb 2.0 port, not 3.0)...and the one closest to the computer's power supply seems to be recommended from what I've read. Hopefully you'll get it to go through successfully if you keep trying.
2 Days Now. I have tried every which way.... no good
mattnmag said:
If ODIN is recognizing the phone, then I would try it with the pit file. Disable all Antivirus programs too and run ODIN as administrator. Also make sure kies is not running in the background. Other common fixes for ODIN problems are to try different usb cables and different usb ports (use a usb 2.0 port, not 3.0)...and the one closest to the computer's power supply seems to be recommended from what I've read. Hopefully you'll get it to go through successfully if you keep trying.
Click to expand...
Click to collapse
I'm screwed untill someone comes out with a way to root 4.4.2
This is the second time the phone crashed on me
I was able to use Odin to fix the last time loading 4.4.2
Now the modem is disabled so I cant fix trough Kies either. Cant get in to Recovery Mod either....Only Odin and there has been no Roms that have worked...I'm stuck??????????????????
Any other Ideas?
Cliff
cjmedina2 said:
I'm screwed untill someone comes out with a way to root 4.4.2
This is the second time the phone crashed on me
I was able to use Odin to fix the last time loading 4.4.2
Now the modem is disabled so I cant fix trough Kies either. Cant get in to Recovery Mod either....Only Odin and there has been no Roms that have worked...I'm stuck??????????????????
Any other Ideas?
Cliff
Click to expand...
Click to collapse
(Edited for clarification)...
I apologize, but I'm not sure that I totally understand what you're saying. Did you get the phone restored to 4.4.2 with Odin and it crashed after you restored it? And now it won't boot into recovery (with volume up+home+power buttons all held at same time)... to let you complete a factory reset and wipe cache to see if that helps?
If you still need to restore it, then the best way to restore would be to reinstall the Verizon factory stock 4.4.2 ND7 firmware back onto your phone using Odin. Use the link I gave you above to get the stock firmware from Sammobile if you don't have it already. Use Droidstyle's guide to restore the phone (including the pit file when you install it in ODIN).
I'm not sure what you mean by your modem being disabled...it sounds like you're saying that Odin recognizes the phone, so are you meaning that you no longer have data and wifi....or your computer won't recognize the phone when you connect it and try to boot up into the ROM? If Odin still recognizes the phone in Odin mode, then you should be able to restore it back to 4.4.2.
You won't be able to use Odin to flash any custom ROM'S if that's what you were trying to do because your bootloader is locked. However, there is a root method for 4.4.2 called Ghettoroot, but it doesn't unlock the bootloader...just gives root access. If you can get the phone restored, you could research more about Ghettoroot later.
Hi
I have the Verizon version SCH-1605 NOTE 2 Phone
A few months ago I had a problem with the phone so I re-installed the firmware with stock 4.4.2 from the Samsung site. I think i was coming from 4.3 but not sure. I did this manually through Odin
I have first tried to reinstall 4.4.2 but fails through Odin.... it failed at sboot.bin. I have tried all other firmware and suggestions with no luck. I just tried the oldest firmware listed on the Samsung site 4.12 and it stops at NAND write.
I have to use Odin because the modem is disabled...
I cant plug the phone in the USB and get the phone drive showing....no beep when plugged into USB!
But I can put the Phone in the Download mode. I can't put it in recovery mode! I have to use Odin....PERIOD!
How the F do I reload the firmware???????????????
P.S Just found out what may be the problem over all. When in the Dowload mode it uses the Modem. When I go to Device Manager to check the status it says working but if id a querry it say says the Modem failed to respond!
Make Sure it is properly connected and turned on. if it is an internal modem of is
connected, verify that the interrupt for port is properly set.)
??????????????????????????????????????????????????????
Cliff
I have a bricked 5830i. It will enter download mode but I cannot get it into recovery mode ( power & Home? ) After multiple attempts I have got the PC to load the drivers successfully & recognise the phone is connected to the PC.
It is UK unlocked, not rooted and I have the single firmware file.
My problem it is not recognised by Odin 3.84 at all. Earlier versions do recognise it, v1.85, v3.07, v3.10 but they do not have the single package option.
Can anyone tell me how to use the earlier versions of Odin or point me to a reliable firmware link for the multiple files?
Thanks
Dave
ManxDave said:
I have a bricked 5830i. It will enter download mode but I cannot get it into recovery mode ( power & Home? ) After multiple attempts I have got the PC to load the drivers successfully & recognise the phone is connected to the PC.
It is UK unlocked, not rooted and I have the single firmware file.
My problem it is not recognised by Odin 3.84 at all. Earlier versions do recognise it, v1.85, v3.07, v3.10 but they do not have the single package option.
Can anyone tell me how to use the earlier versions of Odin or point me to a reliable firmware link for the multiple files?
Thanks
Dave
Click to expand...
Click to collapse
You didn't say anything about your Carrier nor your CSC/PDA/MODEM parts mate , regardless i troubleshooted some fellow from Great BT : start reading from the line "1. Download one of the newest non wipe,,,,,,,," @ post#4 of this topic and keep doing what exactly i said there to resolve recovery issues plus pc recognition by Oidn and other stuff .
Assistance provided through pm as he requested and problem solved .
If anything is not clear enough or you got more questions you may ask me through pm directly or ask here mate .