i write here after i try everything i can do by myself...i need to say that i have the phone working good from 2013 without any problem ..i update
to 4.4 without any problem..at all and use the phone ..
until couple days ago i update the phone to the last version E330SKSUCNE2 and the system was slow so i install it again and did a factory rest..
after i did it ...every time i insert my sim card or the phone try to find or connect to a cellular the system give me that massage
Com.android.phone .... ohh believe me i am so tired i try to fix it ...with all the guide online clear cache from phone and couple more app do again factory rest and re flash the phone again with the same and previous version nothing the phone still give me that massage ..
what can i do ? i read about people flash a modem and its fix it some how please help me please !
Related
Hi ,
I tried to install as stated in the thread
http://forum.xda-developers.com/showthread.php?t=947613
i followed all the steps as said and i rebooted after installing from SDcard through xRecovery.
the system booted with SE logo and with CM 6 logo after a while i got error "The process com.google.process.gapps has stopped unexpectedly. Please try again" with force close button. if i click force close the same error msg repeats again and again and end up with this error "Process.system is not responding".
I am not able to user SEUS.
Kindly help on this. Not able to turn off the mobile using power button. i turn it off by removing battery. the phone restarts if i insert the battery and end up with same error.
Did u wipe phone, all caches and battery stats before flashing the ROM? if not, that could b ur issue. U should that what i said and try reflashing the phone. U could of also had a bad flash. Try that or if that doesnt work, use flashtool from x10 android development section. Post what ur plan is.
Whats the baseband number u have currently on phone?
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Thankyou so much i fixed the same issue
i had the same issue when restore a backup after test another custom firmware. but in my case i lost GMS network , so i tried to restore my backup a lot of times but nothing. Until i saw unknow on bb info and i reinstalled bb .54 with Flashtool .. .and it worked ... so if you dont tried this, maybe it can resolve it
bad english sorry... google
Hi Everyone,
I have the Motorola Razr XT910 with Android version 2.3.6 (the latest update). I had issues with the signal since last update mid February. So after so many trials to solve the issue, I decided to do a factory resetting yesterday.What happened is the signal became better, but I receive a continuous message whenever I connect to the internet. The message says "Sorry! The process com.motorola.service.main has stopped unexpectedly, please try again." So I have to force close. I tried to search for a solution in the net but no help.
Kindly help me
flupo2000 said:
Hi Everyone,
I have the Motorola Razr XT910 with Android version 2.3.6 (the latest update). I had issues with the signal since last update mid February. So after so many trials to solve the issue, I decided to do a factory resetting yesterday.What happened is the signal became better, but I receive a continuous message whenever I connect to the internet. The message says "Sorry! The process com.motorola.service.main has stopped unexpectedly, please try again." So I have to force close. I tried to search for a solution in the net but no help.
Kindly help me
Click to expand...
Click to collapse
If you're rooted I would boot into recovery and wipe cache/system etc.
If you're not and don't plan to, then the only thing I think you would be able to do and hope it works would be to format internal storage and remove your SD card, do another factory restore and see if that clears it up.
Otherwise you're probably going to need to root so you have more control over the internal data to wipe and start fresh.
That process that is crashing is a core piece of the operating system. Something got borked along the way for some reason. Don't fret someone here much smarter than myself will be able to help you, just not at 11:30pm at night
IdowhatIwant said:
If you're rooted I would boot into recovery and wipe cache/system etc.
If you're not and don't plan to, then the only thing I think you would be able to do and hope it works would be to format internal storage and remove your SD card, do another factory restore and see if that clears it up.
Otherwise you're probably going to need to root so you have more control over the internal data to wipe and start fresh.
That process that is crashing is a core piece of the operating system. Something got borked along the way for some reason. Don't fret someone here much smarter than myself will be able to help you, just not at 11:30pm at night
Click to expand...
Click to collapse
Thanks for the help.
My Razr is not rooted so I'll try the 2nd option.
BTW, I'm in overseas now and it is morning time here.
So i was running cm 10 for awhile a couple of weeks ago .. it worked fine .then. i went to another rom for awhile .. and deciced to flash cm10.. but the prob is i keep getting the error msg "Unfortunately, the process com.android.phone has stopped working`" after i do a ti bu restore .. i remember getting that msg once in awhile when i was running it before , but was no big deal.. but now it is so persistant that i cant even acess unlock screen.. tried fix permissions from twrp..full wipe... flash again.. same prob.. could i be running the wrong gapps pkg?..any one have any sugestions?... ive searched threads .. but no one has had it come up so persistantly that they cant even unlock the screen!
That error appears when your phone has no signal and is acquiring it, mostly after toggling Airplane Mode or freshly booting the phone
Sent from my A500 using Tapatalk 2
thanks .. may be its going into airplane mode some how by default ... ill re boot and see if there is somewhere i can preventing it going into airplane mode
.. went to settings>profiles airplane mode and and disabled it and set that as my defult profile ...worked ok untill i ran a titanium restore.and rebgooted after... really frustrating... something in the data that titanium is restoring.. is doing it i think
It's anytime your phone loses signal. Might need to flash back to stock for reprovisioning
thats a good idea for sure ill give it a try .... im currently running viper 4g..gotta be a link here someplace for stock rom
Viper will work
you'd think that would be sufficient .. but on recollecttion.. i remember flashing the PJ 51 firmware could that be the issue?... iknow these are kind n00b questions .. thanks for being patient
The first update was for wifi and the second was for lte hand off problems. I don't think a firmware update will fix the signal issue. Like I said try reprovisioning the phone. ##72786# select menu then reset
when i do that it asks for password .. tried every one i could think of .. cant get to menu
The password is your msl
I did a reprovision, but didn't help any. Fix permission from Recovery did the trick.
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...
Hi!
My girlfriend has an LG L70 Dual Sim (D325f 0814) phone. About one moth ago, the phone started suddenly restarting. After one restart this image showed in the screen. hZZZttZZZps://wwZZZw.dropZZZbox.com/s/teklp3uZZZpaz6f5mz/20170118_ZZZ194100.ZZZjpg?dl=0
I have never used other battery in the phone. (replace all triple ZZZ to nothing and you can have the correct link)
After that I tried a factory reset. But it did't helped. After the reset, the phone always shows me com.android.systemui has stopped error message. So i decide to install other room. I don't know, other ROM solve this problems, but I don't have any other idea. So Where can I find ROM for this phone? And how can I install it? I only need a working phone, i don't want android 5 or any costum things. The phone currently running Android 4.4.2 (kernel version 3.4.0+ build number KOT49I.A1464618841)
Please help!
Thanks.
Normally installing mods or messing with system causes this errors
Ultimate solution is reflash the ROM using stock ROM
You can download the ROM using google and flash it via stock recovery
This will solve your problems
Thanks for the answer The Hard Gamer. I install D32510F_00 firmware from csmgdl.lgmobile.com. The com.android.systemui message goes away. Now i wait for other system error messages.