Ive tried installing the 4.4.2 ROM Achidroid N7000 on my phone using TWRP but it skipped the MD5 check and said "Installation failed/aborted....". I then tried an AOSP 4.4.2 ROM but it said the same error message. After that, I gave up and tried to use the phone. When it booted up, it froze on the Samsung logo and wouldnt boot up completely. Ive tried doing a FDR through the custom recoveries but still the same thing happens. I really dont know what to do. I have an i9300 under 4.3.
Any help would be appreciated. Thank you.
Follow the guide in general forum on how to flash a stock firmware, download the latest one for your country from sammobile.com.
Factory reset after flashing in recovery.
Sent from my GT-I9300 using Tapatalk
jheayahr said:
Ive tried installing the 4.4.2 ROM Achidroid N7000 on my phone using TWRP but it skipped the MD5 check and said "Installation failed/aborted....". I then tried an AOSP 4.4.2 ROM but it said the same error message. After that, I gave up and tried to use the phone. When it booted up, it froze on the Samsung logo and wouldnt boot up completely. Ive tried doing a FDR through the custom recoveries but still the same thing happens. I really dont know what to do. I have an i9300 under 4.3.
Any help would be appreciated. Thank you.
Click to expand...
Click to collapse
I dun think archi developed any rom for the N7000. At least I didn't see any when googling. But if you flashed a N7000 rom on ur phone, even if u finally unbrick it, I bet there will be some hardware issues.
JellyYogurt said:
I dun think archi developed any rom for the N7000. At least I didn't see any when googling. But if you flashed a N7000 rom on ur phone, even if u finally unbrick it, I bet there will be some hardware issues.
Click to expand...
Click to collapse
That should be a typo its n7100 which is the port for our s3 from international note 2
Sent from my GT-i9300
The first page alr said tat the rom is VERY buggy and is in the experimental state. Many things are not working in tat rom. So I have no idea why some one would wan it as their daily driver rom.
Issue Solved
Thank you guys. I was able to flash the ROM properly using PHILZ recovery.
Related
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
sinsai said:
After Upgrade my i9100g from stock ICS to Stock Official JB 4.1.2 France...my touch screkeen not functioning properly...
but when plugin to charger or usb its back to normal and smooth...
it never happen when i using stock ics and custom ROM...
example : when i try to draw 'S' it will be like on the picture...
it hard and imposible to drag and drop item..
i have try reflash and redownload firmware 5-6 times also root and w/o root but the problem still same...
Click to expand...
Click to collapse
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Hannibal226 said:
Did u update via kies or odin?
If u used a firmware and flashed via odin, please try another firmware.
Over this try to do a factory reset after u flashed the FW.
CHEERS
Click to expand...
Click to collapse
update via odin...trying both 3.07 and 1.85
i use firmware on this post http://forum.xda-developers.com/showthread.php?t=1679636
and done factory reset every time before and after done flashing...
after done several times flashing, im still facing touchscreen problem...
the weardest is the problem fix when i plugin charger...
umair241995 said:
Well your phone is i9100g... You sure you flashed ROM of i9100g and not of galaxy s2 i9100...coz many people make that mistake..
Post this in the i9100g...idk how much we can help you with this..
Anyways, try factory resetting the phone...if no luck take it to Samsung customer care...it can be a hardware problem. ..
And ya, which ROM are you flashing? The official stock ROM or custom ROM?
Custom ROM do have many bugs and vary from phone to phone. .. Try going to stick for one and check if problem is still there. .
Press thanx if I helped...
Click to expand...
Click to collapse
cannot post on i9100g dev becoz my post still under 10...
im sure i flash the right rom from http://forum.xda-developers.com/showthread.php?t=1679636
ya..done factory reset but still got the problem...
like i said before..the touchscreen work fine if i plugin charger or connect usb to pc/laptop...
i dont think it becoz hardware problem since it work perfect on stock GB, stock ICS, aokp, CM and 4-5 other custom ROM...
can it becoz of battery? i use 1650mah...i have try 1500mah and touch screen getting more worst...
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
sinsai said:
i still cant find any solution for my phone..
already try many method like
- using re-partion on odin with pit file
- format data, system, cache, emmc
- wipe data/factory reset/dalvic cache
- flash using odin/cwm
- root/unroot
after done all above..touch screen laggy and still make dash line on drawing...
after my last post...i have try most rom on Galaxy S II I9100G Android Development Section and my touchscreen on all rom are working perfect except official stock JB or custom rom base on stock JB...
forgot to mention that the day on my 1st time installing stock JB i accidently flash Galaxy tab 2 p3100 firmware and got softbrick
but successfuly unbrick then done flashing stock JB...dunno if this incident can damage my phone...
or is other way to make FULL FORMAT internal SD? to make sure the file that i accidently flash completely remove...
Click to expand...
Click to collapse
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Touch not responding properly
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
---------- Post added at 01:53 AM ---------- Previous post was at 01:43 AM ----------
gastonw said:
Search for nuke script and see if you can nuke your device.
FIND OUT, don't perform it without knowing if it's meant for your device.
Sent from the little guy
Click to expand...
Click to collapse
I have this problem to.
Any news about this?
I dunno, I don't have an I9100G.
Sent from the little guy
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
acse1 said:
you could try Blazing Kernel, it can be flashed via stock recovery. http://forum.xda-developers.com/showthread.php?t=2113545.
Or you could also flash original GB and upgrade to JB either through OTA or KIES.
Click to expand...
Click to collapse
I have tried that two methods, Flashing GB (everything works great), flashing ICS (everything works great too), and then JB trough OTA and the touch screen doesnt work properly. I have tried the last Blazing Kernel too without success.
Thanks for the help.
Any ideas?
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
gastonw said:
Try stock kernel. Customs aren't ready yet.
Sent from the little guy
Click to expand...
Click to collapse
The stock Kernel file is already on the Stock JB Odin file?
Like these : http://forum.xda-developers.com/showthread.php?t=1679636
Indeed it is.
Sent from the little guy
gastonw said:
Indeed it is.
Sent from the little guy
Click to expand...
Click to collapse
Dosent work either. :/
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
samstacle said:
We have the same problem dude, touch screen not working properly after stock jb (xef) flash but working flawlessly when phone is plugged. I can't have a custom rom above 4.2.1, else I have the problem. Now I'm on CM10.1 4.2.1 and can't leave it because of this, the official rom I want is the official.
Did you got the screen of your phone replaced ? Because mine was and I was wondering if it was that.
Click to expand...
Click to collapse
Not sure if it was replaced because I bought it used on ebay.
But are you using CM10.1 4.2.1 without touch screen problems? Can you tell me the date of the release so I can try to flash my phone with that ROM?
Thanks
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
samstacle said:
Yeah without touch screen problem. It's 20130213 nightly
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply.
I just find the 20130214. Is that one? I will try it.
Finally managed to get my phone working again...But can someone tell me what went wrong?
I was running JB NEATROM with SIYAH 4.1.5 Kernel. Strde I flashed GS2Wiper and then Dorimanx 9.42 kernel, then flashed CM 10.2. Booted and found all normal. went back and flashed Gapps system showing google maps , playstore error . Unable to use phone. Tried back flashing CM 10.2 and Slimbeam Rom working fine, but when flashing Gapps system gets stuck in booting logo.
Finally flashed old siyah kernel 4.1.5 and flashed NEATROM and to my big relief system operational. I want to update to JB 4.3 .Can someone please advice
are you doing a wipe and factory reset after all the different roms you are trying?
You can often avoid bootloops by following the developers ibstructions to the letter.
Then again, if certain ROM-Kernel combo is known for having this issue you could check that same custom ROM thread for support/fix.
That's pretty much how all of these flashing works.
Sent from the little guy
gastonw said:
You can often avoid bootloops by following the developers ibstructions to the letter.
Then again, if certain ROM-Kernel combo is known for having this issue you could check that same custom ROM thread for support/fix.
That's pretty much how all of these flashing works.
Sent from the little guy
Click to expand...
Click to collapse
Gaston, good to see you mate! Been stuck in another book for a few weeks?
@ OP: Beautiful summary by gastonw right here. Read the OP of the thread 2-3 times before flashing. You want to make sure it's compatible with your device, other mods/firmware, and that you know what you're doing during the install process.
Hey hopper, no, it's the UFC era now
Sent from the little guy
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Thanks
Bektas
Darrier said:
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Click to expand...
Click to collapse
have you changed your recovery?
if you flash now another rom or restore your old one does the screen still not work?
Darkened_Sky said:
have you changed your recovery?
if you flash now another rom or restore your old one does the screen still not work?
Click to expand...
Click to collapse
I tried with both stock and temasek once again and the touch screen still does not respond. I always used cwm for recovery though, and did a factory reset on the stock recovery once to see if that works. I can flash ultima as well I suppose but I am not sure if that will fix it.
Edit: I tried to flash ultima but the installation steps required the use of touch screen so I could not proceed.
Are you sure that you download Temasek's rom for I9300 not for another model? Because Temasek supports more devices.
And on Temasek's thread I didn't find any user complaining about touch screen issue after installing it,so I think that you flashed it for different model.
Darrier said:
Hello everyone, I was using ultimarom till now and it worked like a charm. Today I thought hey lets upgrade to android 4.4 so I found temasek's rom and it seemed fine. After flashing the rom, it got stuck on boot screen. So I reflashed the stock rom (btw I wiped everything as required) and it was working. So I retried flashing the Temasek's rom and it booted this time, only thing is that my touch screen was not responding. The capacitive buttons are working also the touch screen is showing everything but not responding to anything. I searched a little bit, and it might be possible that my digitizer is broken which I hope is not since I am in a different country and it will be a pain to do it here. Also I read that if you tried to install Note 2 kernel/rom this might happen but I know that temasek's rom is definitely for s3 so it shouldnt be the case for me. Any help would be appreciated.
Thanks
Bektas
Click to expand...
Click to collapse
Flash back to stock with odin if problem is still there then it is hardware issue....
I rechecked and it is temasek for I9300. I restocked ofc with odin and it is no use tbh. I mean it is weird as the first time I flashed stock rom the touch screen was not working for 30 seconds or sth than it started working so I was really happy for a second.. After another flash it was not working and I was like yea it will work soon, but it didnt. I tried with loads of roms and kernels and it is still no use.
Any help? I have no idea how to fix this! I may have to send my phone for replacement which will be costly I suppose.. Any little tip will be appreciated.
Darrier said:
Any help? I have no idea how to fix this! I may have to send my phone for replacement which will be costly I suppose.. Any little tip will be appreciated.
Click to expand...
Click to collapse
Didn't u install the new version of Cwm? I'm using ultimarom v16 & I try to use Android v4.4.2... It seemed good to me
Sent from my GT-I9300 using Tapatalk
Solution
Hey dude, I couldnt find any solution to that problem. What I did was to send it in for replacement but with warranty. For that you need to triangle away your phone and also install the official firmwares. I had to use a mouse in order to do that but you will need a usb to micro usb converter, which is not that hard to find( and also cheap). They couldnt tell that I installed unofficial firmware, I replaced my screen flawlessly. You can find how to triangle away your phone in this forum and also sammobile is the place to look for official firmware.
Cheers
wanerza77 said:
Didn't u install the new version of Cwm? I'm using ultimarom v16 & I try to use Android v4.4.2... It seemed good to me
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Sorry in advance as I'm sure the answer is here somewhere but I cant manage to find it.
I just got a used Note 2 with an unlocked bootloader.
It is currently on SR Remix 4.3 and I'm wondering what I have to do (if anything) to be able to flash 4.4 aosp roms?
I saw something about using the latest recovery and I also thought I saw something about updating the baseband too but now I cant find it again
I've always had moto phones but with that being said I understand what odin is and helped my cousin flash a couple roms on his s3 before.
Any help is greatly appreciated. The last thing i want to do is brick my new phone haha
EDIT: My baseband is MJ9. Probably should have mentioned that
DroidAddict101 said:
Sorry in advance as I'm sure the answer is here somewhere but I cant manage to find it.
I just got a used Note 2 with an unlocked bootloader.
It is currently on SR Remix 4.3 and I'm wondering what I have to do (if anything) to be able to flash 4.4 aosp roms?
I saw something about using the latest recovery and I also thought I saw something about updating the baseband too but now I cant find it again
I've always had moto phones but with that being said I understand what odin is and helped my cousin flash a couple roms on his s3 before.
Any help is greatly appreciated. The last thing i want to do is brick my new phone haha
EDIT: My baseband is MJ9. Probably should have mentioned that
Click to expand...
Click to collapse
You need the latest cwr or twrp. Then you wipe, flash rom, flash latest gapps and then reboot.
DreamFX said:
You need the latest cwr or twrp. Then you wipe, flash rom, flash latest gapps and then reboot.
Click to expand...
Click to collapse
Thanks a lot. Excited to get flashing. Appreciate it
Hi guys,
This is my first time posting a thread in here. I need your help.
My phone is Samsung Galaxy S2 i9100.
Baseband version: I9100XXKI3
(screenshots attached for more info)
I rooted my phone By using Odin3-v1.85. and flashed the recovery to cwm 5.x (i can't remember version) and tried to install custom ROM OMNI
(omni-5.0.2).
I accidently downloaded and installed OMNI for i9100G version. But my phone is i1900 version.
(I downloaded this omni-5.0.2-20141222-i9100g-HOMEMADE.zip ). i forgot to backup previous ROM .
Then i was unable to Turn ON my phone because every time i turn it on, it come back to recovery it self (it's a bootloop i think).:crying::crying:
then i flashed the recovery to CWM-KitKatCompatible-i9100 (version 6.0.2.7) and installed custom ROMs and tried (PACMAN,CM,AICP).
It works fine. everything is just perfect. But i can't make calls or receive.
It says "Mobile Network not available". when i call my phone from another phone i hear ringing it. But nothing shows in my phone. after few seconds i got a Missed call Alert. But this happens only sometimes. All the other times. i cannot call it from another phone.
I tried reset and flash modem using CWM as well as from odin. but no luck.
Please Friends Help me. I don't know whether i put this thread to right section or not. sorry about that.
I did all of these things by surfing XDA forum (as a Guest). And i'm happy about what you guys are doing. Keep it up.:good::good:
(sorry for bad english)
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
code-3h said:
Hi guys,
This is my first time posting a thread in here. I need your help.
My phone is Samsung Galaxy S2 i9100.
Baseband version: I9100XXKI3
(screenshots attached for more info)
I rooted my phone By using Odin3-v1.85. and flashed the recovery to cwm 5.x (i can't remember version) and tried to install custom ROM OMNI
(omni-5.0.2).
I accidently downloaded and installed OMNI for i9100G version. But my phone is i1900 version.
(I downloaded this omni-5.0.2-20141222-i9100g-HOMEMADE.zip ). i forgot to backup previous ROM .
Then i was unable to Turn ON my phone because every time i turn it on, it come back to recovery it self (it's a bootloop i think).:crying::crying:
then i flashed the recovery to CWM-KitKatCompatible-i9100 (version 6.0.2.7) and installed custom ROMs and tried (PACMAN,CM,AICP).
It works fine. everything is just perfect. But i can't make calls or receive.
It says "Mobile Network not available". when i call my phone from another phone i hear ringing it. But nothing shows in my phone. after few seconds i got a Missed call Alert. But this happens only sometimes. All the other times. i cannot call it from another phone.
I tried reset and flash modem using CWM as well as from odin. but no luck.
Please Friends Help me. I don't know whether i put this thread to right section or not. sorry about that.
I did all of these things by surfing XDA forum (as a Guest). And i'm happy about what you guys are doing. Keep it up.:good::good:
(sorry for bad english)
Click to expand...
Click to collapse
You might need to reflash stock rom, then try flash custom rom again.
gsstudios said:
You might need to reflash stock rom, then try flash custom rom again.
Click to expand...
Click to collapse
Thanks it worked. :good::good::good::good:
I reflashed to stock rom and it's working fine.
But i tried to install custom Rom again but no luck there. I was again stuck with Mobile network problem.
May be the problem with kernal.
Any suggestions???
Mobile Network not available after Flashing to custom ROM
I'm also having same problem. I've flashed all the custom roms and mobile network is not working in all roms. Is there any idea to solve this problem then let me know??? please!!
Sudhamshu said:
I'm also having same problem. I've flashed all the custom roms and mobile network is not working in all roms. Is there any idea to solve this problem then let me know??? please!!
Click to expand...
Click to collapse
You will have to flash stock 4.1.2 rom or try a 4.1.2 custom rom. The problem may be caused by the drivers in the built in kernels but I'm not completely sure.
No mobile network on custom roms
I have already flashed the 4.1.2 jellybean rom but 4.1.2 rom also havr bugs. Lock screen doesn't work, I had tried hard resetting but it doesn't solve the problem. I Want use 5.0.2 hazy , cynogenmod, pacman , dirty unicorn, etc and other many custom roms but I'm facing same problem no mobile network, other than that everything work fine....
Sudhamshu said:
I have already flashed the 4.1.2 jellybean rom but 4.1.2 rom also havr bugs. Lock screen doesn't work, I had tried hard resetting but it doesn't solve the problem. I Want use 5.0.2 hazy , cynogenmod, pacman , dirty unicorn, etc and other many custom roms but I'm facing same problem no mobile network, other than that everything work fine....
Click to expand...
Click to collapse
You mean stock 4.1.2 rom? That's very weird for a 4.1.2 stock rom. Maybe an android 4.2 or 4.3 rom?
You are saying that I should try 4.2 or 4.3 custom rom??
code-3h said:
Thanks it worked. :good::good::good::good:
I reflashed to stock rom and it's working fine.
But i tried to install custom Rom again but no luck there. I was again stuck with Mobile network problem.
May be the problem with kernal.
Any suggestions???
Click to expand...
Click to collapse
use another baseband version. I use XXMS4 and I recomend it.
Sudhamshu said:
You are saying that I should try 4.2 or 4.3 custom rom??
Click to expand...
Click to collapse
Yep.
I am having same problem with the network connectivity. It happens with all custom ROMs that aren't stock based. I am stuck with Chameleon ROM which is a hybrid and has a stock samsung base. It is a great ROM but is outdated. I would like to upgrade. Any solution to this problem is welcomed. = D
Okay I think I got a solution here. The procedure is:
1) Make sure you are on a stock based ROM or other ROM where your network is working.
2) Backup EFS.
3) Flash custom ROM of your choice.
4) Restore EFS if there is no network.
Done.
To restore efs, you can use any app tailored to do so but for me it didn't work. I followed this thread:
http://forum.xda-developers.com/galaxy-s2/general/guide-recover-imei-9-steps-t1264021
Follow the steps carefully and you will have network in any ROM you like. Hit thanks if helped.
PS: Sorry for double post
EDIT 2: Even though my network is back, which confirms that the problem was with the missing IMEI. I found out that the IMEI I got now is a fake one. Got to get the real one back now..
i did flash android 10 in my moto one power
after that i went back to stock rom but noe netwrok is not showing up