Related
my phone has following problem
1.wrong boot or flash update in my phone
2.display like Scattered screen
3.not detect via usb to my pc
4.not going in debugging or boot mode with up+home+power and down+home+power
Please help if any one have solution. photo attached
use this link if your phone in Galaxy Y ...
mithunthakur said:
my phone has following problem
1.wrong boot or flash update in my phone
2.display like Scattered screen
3.not detect via usb to my pc
4.not going in debugging or boot mode with up+home+power and down+home+power
Please help if any one have solution. photo attached
Click to expand...
Click to collapse
check this link this might help
it not working
Lt.Shantanu said:
check this link this might help
Click to expand...
Click to collapse
i do same like you say but nothing happen. sill same problem.
my phone is samsung gt-i9000
oh! urs is SGS gt-i9000
mithunthakur said:
i do same like you say but nothing happen. sill same problem.
my phone is samsung gt-i9000
Click to expand...
Click to collapse
sorry i thought your device was galaxy Y
check this thread, it is specially for gt-i9000 device.
you can aslo check this thread for galaxy phones.
hope this helps
it not working
Lt.Shantanu said:
sorry i thought your device was galaxy Y
check this thread, it is specially for gt-i9000 device.
you can aslo check this thread for galaxy phones.
hope this helps
Click to expand...
Click to collapse
As you say i use usb jig but its not working. when i use usb jig phone automatic on but same screen display when i connect to pc usb connect sound play hidden drive show but nothing show in com port in odin.
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
I have the same problem help!!!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
No responses to Emergency mode flashing by KDZ?
Try at least with HARD RESET... Hold Power Key + Volumen Down key + Home key
When LG logo appears, release all the keys! Good luck!
LoToR122 said:
My LG D605 does not boot and I have a black screen. Before brick i go via ADB to recovery on official KK. Mobile is dead USB dont work
Click to expand...
Click to collapse
Give me a pm when you have 1 hour I might have an idea to save you.
christi9503 said:
Give me a pm when you have 1 hour I might have an idea to save you.
Click to expand...
Click to collapse
Can you help me? pls
kikobuendia said:
I have the same problem help!!!
Click to expand...
Click to collapse
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Cisf said:
First, there is no such thing as hardbrick (not anymore, most modern phones cant be hardbriked )
Be sure, u have all the drives and whatnots installed in the copmuter !
from: http://forum.xda-developers.com/showthread.php?t=2730501
[Q] How to install a .kdz?
[A] (Tutorial thanks to @[W]ar[H]ead, confirmed working by TaZRAge)
#1) First to get into download mode:
1. Remove battery
2. Put usb to computer and phone (w/o battery)
3. Hold "Vol up" button
4. Put battery back
You will get into download mode (aka emergency mode).
#2) Unpack kdz flasher, and install msxml.msi.
#3) Run KDZ_FW_UPD.exe set "type" to 3GQCT and "phonemode" to DIAG.
#4) Choose the .kdz file to flash. Download link is under the "Downloads"
#5) Click "Launch software update" and wait. Phone must be connected in download mode(!). KDZ installer might get stuck but DO NOT disconnect it. (Unless it stays that way for a hour as a example)
NOTE: .kdz is a .kdz, you cannot extract it. If you get a .zip from the LG .kdz site you did something wrong.
Click to expand...
Click to collapse
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
christi9503 said:
You don't know what you are saying. You can HARDBRICK ANY modern device. By definition hardbrick means phone won't turn on won't respond and in some cases recognized as usb when connected to pc as usb bulk or qcom usb. etc. You damage the second bootloader and tell me what happens. You will see what you get.
Click to expand...
Click to collapse
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Cisf said:
first this is offtopic. Second, u are wrong ! Unless the phone is pshisicaly damaged (misfuctioning components or damaged), u cant hardbrick the phone with uploading different soft. on it (unless u change voltages and overclok, if that is possible on the device). Ofecourse they are exceptions, but all major modern manufactors, make hardbrick proof devices. Also, how exactly would u modify the emergency mode, and more important even if you could, why wold u do it !?
More on to the topic, none of the operations of rooting, bootloader installing, kdz install or CMx install , gets near the emergency mode. It remains intact.
Just retry all normal steps for installing kdz or recovery again, check the cables, all drivers on pc, and is best to have a charged phone battery.
EDIT: @kikobuendia
i found this post, same operations as mentioned in first reply, but more detailed:
http://forum.xda-developers.com/opt...optimus-l9-ii-lg-d605-unroot-unbrick-t2964693
Click to expand...
Click to collapse
I am not gonna reply again but I am just saying you have no idea. Do not talk unless you are sure you can hardbrick any device with just root and just writing on second bootloader partition. Read about it if you don't know. Do not argue about it.
I can't get into download mode
kikobuendia said:
I can't get into download mode
Click to expand...
Click to collapse
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
When i connect it pc makes a sound
kikobuendia said:
When i connect it pc makes a sound
Click to expand...
Click to collapse
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
christi9503 said:
I don't care if it makes a sound or not it's like it gets recognized? Look into device manager.
Click to expand...
Click to collapse
Yes but flashtool doesnt recognize it
kikobuendia said:
Yes but flashtool doesnt recognize it
Click to expand...
Click to collapse
If you want to get this fixed just listen to me. It won't work like this tell me the answers to my questions and we might solve your problem. What is your device recognized as. Make me a screenshot of device manager if you can't explain.
neutrondev said:
Then that's a hard brick pretty much. Pull the battery out and connect the phone to PC. Tell me if it gets recognized.
EDIT: OFC wait like 6 seconds then put it back and after that connect to USB.
Click to expand...
Click to collapse
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
did you managed to unbricked it?
I have the same probalem, cant get to download mode, when i connect to pc it recognise it in hs usb qdloader 9008, any solutions to fix it. I flashed wrong .tot file.
Click to expand...
Click to collapse
No, no luck yet. Seems to be impossible.
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Ag0n1a said:
I connect to this post cuz my d605 is also facing a similiar issue, no system, no recovery, no adb, download mode worked only twice, for the rest, only emergency mode works, phone cannot even charge.
Phone is recognized from pc, I uninstalled modem drivers but stays in Emergency only few seconds then it shuts down (not sure if its the battery, since it doesn't charge as well). It shuts down actually at the moment that LG mobile support tool seems to recognize it.
It worked couple of times, phone was keeping staying in emergency mode for the beginning of the procedure but at the moment it need to put the kdz into the phone, the phone die.
The two times download mode worked, same, just shutting down immediately. This with LG support tool or LG flashtool2014.
KDZ_FW_UPD worked the first time after install and then doesn't run anymore, on two different Win10 machines.
I have no idea how to come out of this nightmare, just want to flash it :/
Click to expand...
Click to collapse
well, sorry for not replying earlier. My phone was on guarantee for about 2 months after I wrote the post. I just send it to LG Hellas via the e-shop I bought it from and in about 2-3 weeks, I had my D605 back like it was brand new. I searched a lot about my D605 hard bricked and I found that it is not fixable. My phone could not go into download mode though, as yours. Hope I helped you even a lil bit. Sorry for my bad English.
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Crowds said:
did you see my solution for the COM/USB port problem here?
Unfortunately i'm facing a bigger isue atm :crying:
Click to expand...
Click to collapse
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
gekkorist said:
Hey, test with USB Extansion but dont work... or is 1 Meter to short?
Click to expand...
Click to collapse
humm...not sure, mine has 4mts and it worked on 1st try
usefull tool in one place
Feel free to link your ideas :good:
http://forum.xda-developers.com/and...-tools-one-t2887839/post55673946#post55673946
Thank you
Crowds
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
luis0n said:
i have the same issue, do you have a solution??
i try using a usb expansion of 10 Mts and i have the same issue, not boot no nothing.
Click to expand...
Click to collapse
Sorry but that's the only solution. The one I've wrote on xda.
In fact its quite easy, the problem is when we ended up without it we stressed
For the first time it took me 1 month but then, after that experience, I've manage to make it work after 5 min. And believe me, since the first time, I've broken mine more than 20 times
Sent from my Lenovo K910 using Tapatalk
gekkorist said:
Hello i have bricked my k910.
i flashed a new firmware with twrp and while flashing phone restart.
now im stuck on lenovo logo..
fastboot detect the phone but locked bootloader.
I test with qpst but Qualcomm HS-USB QDLoader 9008 is loaded 2-3 seconds and then the phone goes back to fastboot mode.
no blue LED.
now i disconnect the battery from the phone and only connect with usb+ "volume +, same problem... only detect the Qualcomm HS-USB QDLoader 9008 for few seconds.
what can i do now?
i tested already to click fast as possible to download in emmc software.. dont work.
i flashed before it brick twrp
and the system folder is empty :cyclops:
what can i do now?
Click to expand...
Click to collapse
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
luboii said:
hi ,
I have a same problem . I can't activate download mode . It works 2-3 seconds and then the phone goes back to fastboot mode.
Did you find a solution ?
Click to expand...
Click to collapse
Hi,
no, have no solution. I try all tutorials and usw all Tricks i found in the Internet. Opst, miflash, nothing work. The 2-3 secs in donwloadmoade without a blue led is to short.
I try the tutorials on 6 different computers. Nothing.
I contact the Lenovo support in germany, usa and china, no help..
I found 2 services to unbrick the k910 with a own jtag
1 in Malaysia and 1 in romainia. But i dont trust this peoples.
I buy a new phone and put the k910 in a corner.
Sorry.
Lenovo phone... Never again
any news guy? had same problem with mine. already buy a new battery btw. sighh! when using miflash my phone didt disconnected from download mode but ended with error, while using qpst it keep connect then few second disconnected till my pc get bsod.
Send my phone I offer repair brick k910
Hello guys,
im starting to lose hope that my phone will ever get to work again. I tried flashing a rom via TWRP, which led into a bootloop. After that I tried flashing another version of TWRP, which let to the fact, that everytime I now press Power + Volume down it also gets into a bootloop and does not show up TWRP. After that I tried connecting it to my PC in Fastboot mode, but since no USB-Debugging is enabled and cant be enabled, it is also not working, even with Universal Adb drivers installed, windows does not recognize any device is connected... so my question is, if there is any hope left or my phone is just dead...
I really hope you can help me.
Leon
[email protected] said:
Hello guys,
im starting to lose hope that my phone will ever get to work again. I tried flashing a rom via TWRP, which led into a bootloop. After that I tried flashing another version of TWRP, which let to the fact, that everytime I now press Power + Volume down it also gets into a bootloop and does not show up TWRP. After that I tried connecting it to my PC in Fastboot mode, but since no USB-Debugging is enabled and cant be enabled, it is also not working, even with Universal Adb drivers installed, windows does not recognize any device is connected... so my question is, if there is any hope left or my phone is just dead...
I really hope you can help me.
Leon
Click to expand...
Click to collapse
Did you tried the Mega unbrick Guide?
Never loose hope buddy we have many devs here to help us
Try this it will help you for sure
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
faap25 said:
Try this it will help you for sure
http://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108
Click to expand...
Click to collapse
Thank you for your help. I was trying to do it with this mega unbrick guide, but at step 4 I connected it to my pc and the device manager didn't show up anything. Do I need to install any drivers before doing that or uninstall the adb drivers I previously installed?
Thank you
Finally it worked! The problem was the usb cable I was using!
Dears, I was (was) getting excited about the Oreo upgrade for our Z3 Tablet and I started the needs by following the related thread but when I flashed the boot.img........ after that, Windows started to recognize it as "Unkno w USB Device (Configuration Description Request Failed).
Now it doesn't boot anymore and it is not recognized by the system. I tried also from another PC with Windows 10 but same result....
How can I fix it?
Are you sure you flashed the right image for your device?
M1chiel said:
Are you sure you flashed the right image for your device?
Click to expand...
Click to collapse
Dear,
thanks for the reply. Yes, I did... the bad is I don't see the magenta/blu icon appears when I do the up+plug. The device is recognized but in that "strange" status.
sev7en said:
Dear,
thanks for the reply. Yes, I did... the bad is I don't see the magenta/blu icon appears when I do the up+plug. The device is recognized but in that "strange" status.
Click to expand...
Click to collapse
My guess is that your device either got hard-bricked or that you need to re-install the drivers on your PC (e.g. with Flashtool).
M1chiel said:
My guess is that your device either got hard-bricked or that you need to re-install the drivers on your PC (e.g. with Flashtool).
Click to expand...
Click to collapse
Good morning,
thanks, I tested it also under macOS... it's hard brick. There is any way to bring it at life?
Thanks for your support
Can you boot in fastboot mode? Or is your device not recognized in fastboot mode? If you can you can try flashing stock firmware with Flashtool. If not, I can't help you any further :crying:
M1chiel said:
Can you boot in fastboot mode? Or is your device not recognized in fastboot mode? If you can you can try flashing stock firmware with Flashtool. If not, I can't help you any further :crying:
Click to expand...
Click to collapse
Good evening,
no... it is not recognized as "fast mode"... also when I plug it anytime is recognized as unknown... does it is gone for good?
Maybe this: https://forum.xda-developers.com//z...d-ice-cold-project-o8-1-t3731197/post75364462
Thanks for the support dears! It's back!!! It was stuck, I did the reset waiting the 3 vibration and then via flashboot it was recognized