[ROM][I605VRUFND7][4.4.2]OFFICIAL STOCK ROOTED ODEX/DEODEX[6/13/2014]
It's OFFICIAL!! 4.4.2 KitKat! Come get it! Not for use with safestrap as it requires the boot.img to be flashed.
Install steps:
Download Rom, Radio and SuperUser.zip. Verify MD5 on all of them
Recoveries:
Latest PHILZ** or CWM
Coming from 4.1.2?
You need flash 4.3 MJ9 firmware before flashing this. Thread can be found HERE
Once you have all these transfer ROM, Radio and SuperUser.zip to exsdcard.
Reboot into recovery
PHILZ/CWM:
Wipe to install New ROM.
Once flashed reboot
Go through setup
Reboot back into recovery. Flash SuperUser.zip and then Radio.
Done..
Explanation:
We have had several differences between phones..with builds, root etc. Please read these directions..Until a official tar is release we will prob continue to have these minor issues
Thanks to the whole N3BULA Team!
@deckoz2302
@fkfmfz
@krowley3 BIG THANKS TO THIS MAN! PUT IN A LOTTT OF WORK!:good::good:
@datstudandre for VZW 4.4.2 OTA and system dump!!:good::good:
Anyone is free to use this.. Just please give proper credits
:good::good:
icedventimocha said:
Just got a little agro seeing my reboot mod has as many downloads as this thread has got thanks. These guys have put in DAYS to give you a solid build. Hit the freaking thanks button will ya?
Sent from my Galaxy Note II
Click to expand...
Click to collapse
:good::good:
DOWNLOADS
Directions posted in OP hopefully that will solve some of the issues..
Please read them..make sure you know what a FULL wipe is..
Also those people not able to turn wifi on, have you flashed and updated to MJ9 firmware? If NOT.. you need to, to have working wifi..
If you are still having issues, my next suggestion would be to odin back fully to stock, re run CASUAL and then try again.
I will be all over this Monday if people continue to have issues. But PLEASE read the installation intrusions before you report your having issues.
Know that A LOT people have already flashed this and it works perfect fine..so if you having issues make sure you are doing things correctly before blaming this STOCK ROM
Thanks again for the support!
Click to expand...
Click to collapse
New Modem/Baseband: NEW ND7 4.4.2 RADIO
Deodex/No Knox Version: ND7_deknox_deodex.zip
Odex/Stock/Rooted/Knox Version: ND7_odex_rooted.zip
Debloated/Deodexed Version with updated core apps and external SD Fix: vrufnd7_debloat_build3.zip
UPDATED 06/18/2014!! Root now sticks with Philz latest only. TWRP causes write issues and root issues. Also KNOX has been fully removed! We will have the Official Tar up today as well..Hopefully that will fix charging issue with phone off
IF NO ROOT FLASH THIS in RECOVERY
If you consider donating..PLEASE send them to @krowley3 and @fkfmfz..If I receive any I will pass them to them
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[ROM][I605VRUFND7][4.4.2]OFFICIAL STOCK ROOTED ODEX/DEODEX[6/19/2014], ROM for the Verizon Samsung Galaxy Note II
Contributors
lacoursiere18, krowley3, fkfmfz, deckoz2302
ROM OS Version: 4.4.x KitKat
Version Information
Status: Stable
Created 2014-05-27
Last Updated 2014-06-20
Mods..
4-way reboot
FLASHABLE ZIP
Thanks @icedventimocha
Imaged Battery 1% Mod
Thread Here
Reserved
Sweet.
Sent from my SCH-I605 using Tapatalk
How very cool. Thanks N3BULA Team and to anyone else involved. ?
Congratulations on another "FIRST" N3bula team!!!
Sent from my SCH-I605 using XDA Free mobile app
good stuff i will be trying it very soon thanks.
Downloading odexed version now.
gonna try it tonight, thanks!
tether option?
not much for touchjizz, but for this I'm going to have to try it! Thanks N3bula team and the guy for OTA/system dump! Ya'll rock!
Thanks guys! as alway you ROCK!
Can you choose faster Sites for upload please, androidfilehost.com is super slow.
dropbox or IDrive are great options i think.
Thanks
Thank you will give it a shot.
"Beans Build 22"
Is an Odin to mj9 required to use this ROM?
Sent from my SCH-I605 using Tapatalk
I flashed the Odex version and everything went smooth. I'm finding I can't connect to my wifi network, but it isn't like the old 4.3 problems where wifi would shut off. It just tries and tries to obtain an IP but never does. Can anyone else confirm this same thing?
I do have the MJ9 firmware used with 4.3. Just for fun I flashed it again to see if that would fix wifi and it didn't. I'm heading home and going to see if it will connect to my home network.
Thanks again for everyone involved in putting this together!!
If I'm running the port, without any noticeable issues, any reason I should switch?
Sent from my SCH-I605 using Tapatalk
And I thought I was gonna have a boring day. Time to bust out apktool. Thanks guys
Sent from my Galaxy Note II
jmart75 said:
I flashed the Odex version and everything went smooth. I'm finding I can't connect to my wifi network, but it isn't like the old 4.3 problems where wifi would shut off. It just tries and tries to obtain an IP but never does. Can anyone else confirm this same thing?
I do have the MJ9 firmware used with 4.3. Just for fun I flashed it again to see if that would fix wifi and it didn't. I'm heading home and going to see if it will connect to my home network.
Thanks again for everyone involved in putting this together!!
Click to expand...
Click to collapse
Yes, same issue with wifi here.
I am going to pull the download. I have a debloated, deodexed, init.d enabled, knox free, and wifi tether fix version that is about to go up. It does not have any wifi issues. Sorry for the troubles.
krowley3 said:
I am going to pull the download. I have a debloated, deodexed, init.d enabled, knox free, and wifi tether fix version that is about to go up. It does not have any wifi issues. Sorry for the troubles.
Click to expand...
Click to collapse
You're the man!
Will the hotspot work?
Sent from my SCH-I605 using Tapatalk
Related
I have removed Knox so I suppose this is no longer a Stock Rooted, but more like Stockish Rooted.
I have also included the SD fix to platform.xml.
[size=+4]DOWNLOAD HERE[/size]
FULL ROM:
DeOdex:
Touchwiz KitKat 4.4.2 T320UEU1AND3
MD5: c5e1991f353c163282df41b72cda46a7
[size=+4]WiFi problems?[/size]
Try this:
Due to "securestorage" being set to true in build.prop, changes to the ROM or kernel that aren't reflected in the ss_id file in /system/etc/secure_storage/.system.bin.wpa_supplicant/ can cause issues with WiFi among other things. You can set this to false yourself, or simply flash the zip file below.
Download: Set Secure Storage to False
For those that prefer to do it manually, simply change this line ro.securestorage.support=true to false in /system/build.prop.
Changelog:
5/13/14: Initial release.
XDA:DevDB Information
Stockish NO KNOX, ROM for the Samsung Galaxy Tab Pro 12.2, 10.1, 8.4
Contributors
freeza
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Galaxy Tab Pro 8.4 Wi-Fi
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-05-13
Created 2014-05-14
Last Updated 2014-05-16
Reserved
Thanks FreeBro!
Time to get started bro! Great work!
Nice...
Nice...
Glad to see more developers hopping in with some quality roms.
Question: did you experience any random reboots at all? I'm stock rooted and I have them, I can't seem to identify the main cause for this, could it be that Secure Storage thing in build.prop?
Man, You work fast.. Im excited that You and JB are here.. Im downloading this, and I dont even have the Tab yet.. These are truly exciting times..
First of all, thanks for a new ROM.
Tried to install with TWRP 2.7.0.2 failed. Switched to latest Phil success.
I cannot get the pin lock to work. It keeps reverting back to swipe.
Thanks
I managed to capture a logcat but I can't seem to identify the cause of random reboots, can anyone assist with that pls...
gasgrillwok said:
First of all, thanks for a new ROM.
Tried to install with TWRP 2.7.0.2 failed. Switched to latest Phil success.
I cannot get the pin lock to work. It keeps reverting back to swipe.
Thanks
Click to expand...
Click to collapse
Confirmed. I flashed the TAR image provided by Samsung KIES and the problem still persists....
freeza said:
Confirmed. I flashed the TAR image provided by Samsung KIES and the problem still persists....
Click to expand...
Click to collapse
That's not good...
Guess I will wait for another OTA then before I get started...
My boy finally, you shoulda let ur Boi know
Sent from my SM-T320 using Tapatalk
knox not tiknet? warranty does not disappear?
Solution for use TWRP recovery, please?
Worked great for me. Flashed with TWRP. No random reboots. Screen is much much better
lasset said:
Solution for use TWRP recovery, please?
Click to expand...
Click to collapse
Try wiping Dalvik,Cache,System,and Data.
Ok, thanks!
Download page is not working.
Thanks
edit: working now.
Alexey71 said:
knox not tiknet? warranty does not disappear?
Click to expand...
Click to collapse
The Knox counter is tripped during the root process. This is a ton replacement with all the Knox reference removed.
Someone correct me if I'm wrong.
Sent from my SM-T320 using XDA Premium 4 mobile app
Happy Birthday @freeza!!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Works perfect but my battery reporting is all over the place. I went from 100 to 68 in 20 minutes and it said 89 after a reboot. Its been 2 days. Im hoping a few more charging cycles fixes it. Strange problem I have never had with any device or roms before
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS IS A BETA. THINGS MAY BREAK. I HAVE NOT TESTED.
Thread Closed until it gets fixed and/or updated to Lollipop
BROKEN DO NOT TOUCH, WARNING. WARNING. DANGER WILL ROBINSON.
I spoke too soon and threw it out here. Sorry guys, will get it fixed ASAP.
INSTRUCTIONS,
1. UPDATE RECOVERY
2. FACTORY RESET (If coming from another rom or stock)
3. INSTALL ROM
4. INSTALL GAPPS
4. REBOOT
5. CUSTOM KERNELS MAY BREAK ROOT, SIMPLY RE-FLASH SUPERSU
PA 4+ UPDATES DO NOT NEED A FACTORY RESET.
Downloads
https://s.basketbuild.com/devs/jholtom/ls990/aospa/
https://androidfilehost.com/user/?w=settings-dev-files&flid=21352
USE PA-GAPPS
More info will come later.
XDA:DevDB Information
[ROM] [4.4.4] [UNOFFICIAL] ParanoidAndroid 4.6 [BETA6], ROM for the Sprint LG G3
Contributors
jholtom, invisiblek
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: AOSPA
Version Information
Status: Testing
Created 2014-11-17
Last Updated 2014-11-19
Super awesome!
Reserved. Will flash
Holy mother Mary of God and baby Jesus. Nice work everyone who helped.
Stuck at lg boot screen
Sorry about that, try and grab a logcat, or last_kmsg. again, i did say i didnt test.
Safe to assume anything broken in CM is broken here? Really appreciate devs, But am waiting for BT for daily driver.
JustusIV said:
Safe to assume anything broken in CM is broken here? Really appreciate devs, But am waiting for BT for daily driver.
Click to expand...
Click to collapse
Yup! And that its not even working because I forgot a few things, as always. I'm working on BT, all the g3's have been having trouble though, so hopefully soon.
yea not working for me either. I too am stuck at LG screen. Oh well. And I love me some PA. Thanks for your efforts and hopefully you can figure it out. :fingers-crossed:
Either way your a beast for churning out two roms so quickly, much appreciated! hope your fixes go smoothly :good:
Oh man! I wanted PA on this phone so bad! You're the man!
Damn, I flashed as soon as this was posted and I cant flash anything back to the phone now. Everything is getting suck at the LG screen, even stock
crazycori said:
Damn, I flashed as soon as this was posted and I cant flash anything back to the phone now. Everything is getting suck at the LG screen, even stock
Click to expand...
Click to collapse
Did you make a backup?
Sent from my LG-ls990 using XDA Free mobile app
crazycori said:
Damn, I flashed as soon as this was posted and I cant flash anything back to the phone now. Everything is getting suck at the LG screen, even stock
Click to expand...
Click to collapse
What the post above says and...
The only rom so far that installs the kernel is Barren v3.
Or you can get the flashable stock kernel from the Stock ZV4 ROM thread.
I'll be updating all those to include the kernel shortly. I had to wait for Bump to include it.
golpeen420 said:
Did you make a backup?
Sent from my LG-ls990 using XDA Free mobile app
Click to expand...
Click to collapse
I did but it wasn't booting no matter what I installed. I just used the LG Flash tool and reverted back to stock and re-rooted, wasn't too horrible.
A bit bummed out that the build doesn't work as of yet. I do have a lot of respect for the developers for the AOSPA projects. Keep up the good work fellas, I have faith in you guys!
crazycori said:
I did but it wasn't booting no matter what I installed. I just used the LG Flash tool and reverted back to stock and re-rooted, wasn't too horrible.
A bit bummed out that the build doesn't work as of yet. I do have a lot of respect for the developers for the AOSPA projects. Keep up the good work fellas, I have faith in you guys!
Click to expand...
Click to collapse
Always annoying when you've gotta go that route, that's strange that your backup didn't work though
golpeen420 said:
Always annoying when you've gotta go that route, that's strange that your backup didn't work though
Click to expand...
Click to collapse
To me it doesn't sound like a nandroid was made. I reverted to my stock nandroid just fine from CM. Just so others know.
JustusIV said:
To me it doesn't sound like a nandroid was made. I reverted to my stock nandroid just fine from CM. Just so others know.
Click to expand...
Click to collapse
So did I, that's why I was confused
The links in the OP are not updated correct?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a 95% stock Lollipop 5.0 rom........I'm not going to make a colorful thread on this. Its just
a stock rom with a few features . Please note that I am not going to add anything, nor will I remove
anything else.
Once a new update drops from T-Mobile I will update the rom............
Features
Stock G900TUVU1DOB1
Rooted with SuperSU
Deodexed
4-Way Power Menu
Removed Batter Cover Toast Message
Disabled Signature Verification (user apps)
Working Private Mode
Init.d Performance Scripts
Added Sqlite3
Added BusyBox
Removed Security Pop-Ups
Enabled Unknown Souces as default
How to Flash
YOU MUST BE ON OB1 FIRMWARE TO FLASH THIS
I use TWRP for all of my roms. But, I'm sure other recoveries will work just as well.
A FULL wipe is required if you are coming from ANY rom. I advise a full wipe anytime you flash
a rom......Prevents any issues from popping up.
1. Download the rom
2. Make a backup of your current rom
3.Full Wipe (system,cache,dalvik,data)
4. Flash
5. Boot time can be up to 10 minutes...............
Download
Stock G900TUVU1DOB1
XDA:DevDB Information
Stock Lollipop 5.0, ROM for the T-Mobile Samsung Galaxy S 5
Contributors
The Sickness
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: T-Mobile Firmware
Version Information
Status: Stable
Stable Release Date: 2015-05-21
Beta Release Date: 2015-05-21
Created 2015-05-22
Last Updated 2015-05-21
Reserved
Wow thanks !! Hopefully its not laggy like the other DOB1. Thank you very much. Ily.
Sent from my SM-G900T using XDA Free mobile app
Thanks for this.....
420haxr said:
Wow thanks !! Hopefully its not laggy like the other DOB1. Thank you very much. Ily.
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
I doubt there is lag.
Once again, you give us what we want!
Keep up the hard work dude, it is much appreciated.
You may want to post to be on the OB1 firmware when flashing, it was the only way I could get to boot up.
Thanks man, Been waiting for this!
Thanks for this..
Sent from my SM-G900T using XDA Free mobile app
Thank you very much!
Can I update to rom with ob1 and then flash this rom or do I have to be.on stock ob1? ??
esema1o said:
Can I update to rom with ob1 and then flash this rom or do I have to be.on stock ob1? ??
Click to expand...
Click to collapse
You need to be on OB1 firmware. The OB1 stock kernel will cause older firmwares to BL
This ROM sounds like it's right up my alley, so thanks for posting it! I think I'll try flashing this 1, and I have a few questions.
1. Is KNOX removed completely?
2. Does it have the tether MOD of 1TB? If not, is there a way that I can flash it myself?
3. Can I flash Viper4Android or will I have to use another kernel? If I need another kernel, which do you recommend?
So I have to update to stock ob1 via Odin and root it and then flash this rom???
Mad_Technologist said:
This ROM sounds like it's right up my alley, so thanks for posting it! I think I'll try flashing this 1, and I have a few questions.
1. Is KNOX removed completely?
2. Does it have the tether MOD of 1TB? If not, is there a way that I can flash it myself?
3. Can I flash Viper4Android or will I have to use another kernel? If I need another kernel, which do you recommend?
Click to expand...
Click to collapse
1. Yes
2. No, there is a hack in General I believe.
3. Yes, you can flash Viper, use Kt Kernel
esema1o said:
So I have to update to stock ob1 via Odin and root it and then flash this rom???
Click to expand...
Click to collapse
Yes
This rom need tether any chance u can do it
esema1o said:
This rom need tether any chance u can do it
Click to expand...
Click to collapse
Thats why there is Twisted Lollipop. This rom is stock. If I start adding things it would be just like my other roms.....
Yes I try twisted but not good rom I just need stock with tether
esema1o said:
Yes I try twisted but not good rom I just need stock with tether
Click to expand...
Click to collapse
Not good? Are you kidding me
great rom, just one tiny problem... everytime i do a nandroid backup and i flash it back... when the phone reboots and starts it gives me lots of app crashes making the rom unusable, so i have to reflash back completely with wipes and all... any idea if the rom is faulty or perhaps the version of twrp im using?
SeerePetrova said:
great rom, just one tiny problem... everytime i do a nandroid backup and i flash it back... when the phone reboots and starts it gives me lots of app crashes making the rom unusable, so i have to reflash back completely with wipes and all... any idea if the rom is faulty or perhaps the version of twrp im using?
Click to expand...
Click to collapse
Thats recovery related man.......I use the newest TWRP with zero issues
I have pulled the appropriate libs from the OH1 update and put them in a flashable zip for those of you who want a fix for the stagefright Vulnerability, but don't want to update. I am currently on the OC5 build and I flashed the zip and the vulnerability has been fixed.
IMPORTANT: I have only tested this on the stock deodexed OC5, I can not speak on if it will work for anything else. If you're not on the OC5 build flash at your own risk!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not responsible for anything that may or may not happen to your device, I am just telling you my experience. I recommend having a backup as always.
DOWNLOAD:
https://www.androidfilehost.com/?fid=24052804347798028
Sent from my note 3 running Beast Mode rom
Awesome work man..... nice job!!
Hello,
Can I use this on MJ4?
Thanks!
Sent from my SM-N900P using Tapatalk
Was this designed to be installed in recovery?
BHurst said:
Hello,
Can I use this on MJ4?
Thanks!
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Make a backup and try but since it was for lollipop base it may not.... try it and let us know.
Thanks,
Chaz187
---------- Post added at 11:22 AM ---------- Previous post was at 11:22 AM ----------
dcwashington said:
Was this designed to be installed in recovery?
Click to expand...
Click to collapse
Yes flash in recovery
Thank you @Chaz187
Sent from my note 3 running Beast Mode rom
Thank you for this JB
Hey JoHnNYBlaZE716, the binary-script removes the calendar and stuff since the script was from another package. I am not that familiar with Stagefright but I assume only the library files are needed since they seem to be the only thing in the system path.
Code:
delete("/system/app/Calendar.apk");
delete("/system/app/GoogleCalendar.apk");
delete_recursive("/system/app/GoogleCalendar");
delete_recursive("/system/app/CalendarGoogle");
delete_recursive("/system/app/Calendar");
Sorry I took a zip I had laying around, I'll fix that asap
Sent from my note 3 running Beast Mode rom
I have posted a new link for the stage fright fix that doesn't have the delete calendar script in the updater script. Thanks @dyehya for bringing to my attention and for making the new zip. I am currently without a pc at the moment so you were a great deal of help.
Sent from my note 3 running Beast Mode rom
The new fix did not work for me.
The checker still shows me as vulnerable.
TrofeoSC said:
The new fix did not work for me.
The checker still shows me as vulnerable.
Click to expand...
Click to collapse
One of the 2 apps will show as vulnerable still due to Google not catching the issue all the way. It is something on googles end that's all I know. There will most likely be another update fixing it completely. The app you're using should only show one of them in red correct?
You can read more in the article I have linked below
http://www.securityweek.com/android-stagefright-vulnerability-not-patched-properly-google
Sent from my note 3 running Beast Mode rom
Yes, only the top one in the list.
Thanks
JoHnNYBlaZE716 said:
One of the 2 apps will show as vulnerable still due to Google not catching the issue all the way. It is something on googles end that's all I know. There will most likely be another update fixing it completely. The app you're using should only show one of them in red correct?
You can read more in the article I have linked below
http://www.securityweek.com/android-stagefright-vulnerability-not-patched-properly-google
Sent from my note 3 running Beast Mode rom
Click to expand...
Click to collapse
Dude it's been a while u had shown ur OC5 custom rom on tx_dbs_tx's thread.
i guess that's what u r using right now. are you planning to release it?
Will I b able to keep stock root if I do the full update?
Sent from my SM-N900P using XDA Free mobile app
Yes i plqn on releasing my rom it should be about done soon, just touching up a few things. Amd if you take the update for the OH1 then yes you will lose root and go back to stock. You can just flash this zip for the stagefright fix if you want.
JoHnNYBlaZE716 said:
Yes i plqn on releasing my rom it should be about done soon, just touching up a few things. Amd if you take the update for the OH1 then yes you will lose root and go back to stock. You can just flash this zip for the stagefright fix if you want.
Click to expand...
Click to collapse
That's what I keep saying about my theme until I find something else that needs themed, lol.
Sent from my Galaxy Note 3 using AnaKonda Tapatalk
AnaKonda Theme
eREDicate Theme
JoHnNYBlaZE716 said:
Yes i plqn on releasing my rom it should be about done soon, just touching up a few things.
Click to expand...
Click to collapse
Man that answer hasnt changed since july end...hehe !!
I guess you are busy with ur stuff. Btw do release if u get time or else the device is as good as dead.
and any major difference betn OC5 and OH1?
and hopefully u release fix 2 soon too mate....:highfive:
I am using fre3 4.4.4 KitKat ROM and I am on OC5, flashing your zip just makes my phone get stuck on the Samsung logo. Anything special I need to do? Clearing Davik and Cache doesn't fix it.
joelstitch said:
I am using fre3 4.4.4 KitKat ROM and I am on OC5, flashing your zip just makes my phone get stuck on the Samsung logo. Anything special I need to do? Clearing Davik and Cache doesn't fix it.
Click to expand...
Click to collapse
I honestly can't answer your question, I've personally only flashed it being on a stock oc5 rom. No one has reported any issues so I don't know why it wouldn't work. The files were pulled from the oh1 update for the sprint note 3
Sent from my SM-N920P using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the new Project Fi LVY48F 5.1.1 stock ROM. The rom has simply been rooted and made flashable by @jermaine151. This is based on @Stephen's prior work. So is this thread OP. lol
Rom Features
-Stock Android 5.1.1 Project Fi LVY48F base
-Rooted
-Busybox
-No force encrypt kernel
-Persistent ADB enabled
-Custom DPI set at 460
Flash instructions
1. Download ROM from link below
2. Backup current ROM
3. Flash ROM using TWRP*
4. Profit?
*For best results clean wipe but may not be needed if coming from a previous build.
Disclaimer
We are not responsible for any damage done to your device, either hardware or software. You use this ROM at your own risk. We will try to help resolve any issues you have, but we make no guarantees in doing so.
Download
LVY48F_Odxed_Stock.zip
Custom DPI
LVY48F_Odxed_Stock.zip
Mirror
MD5: 5a7a592b210cd17d7b18810b719bc9ac
Radios, Bootloaders, and More:
[FXZ][OTA] Nexus 6 Recovery Flashable Fastboot Files (Unlocked Bootloader Only)
Scroll down to "LVY48F (5.1.1 Project Fi bugfix update 20150910)" and "Click to Show Content." These can be flashed in custom recoveries.
Suggested Mods:
Xposed
GravityBox
Nexus 6 Double-Tap to Wake
Lightflow Lite or Lightflow Full*
*Lightflow Tutorial
If anyone has other mods to suggest, feel free. These are the ones I use and they work great with this ROM.
Thanks @GuyInDogSuit!!
@GuyInDogSuit yes, I changed my DPI. Sorry about that.
Cheers, I will close my thread off now, as this is newer. Thanks for hosting.
jermaine151 said:
Thanks @GuyInDogSuit!!
@GuyInDogSuit yes, I changed my DPI. Sorry about that.
Click to expand...
Click to collapse
Is it set to 460? That's what ROM Toolbox is telling me.
Just flashed this and everything looks to be working great. Thanks again for doing this, the upgrade prompts were driving me bonkers. I did notice the dpi change and I like it. Much cleaner.
Sent from my Nexus 6 using Tapatalk
Anyone get Android Pay working on this?
can you have one with the Stock DPI please appreciate it and thx
Sent from my Nexus 6 using Tapatalk
davemlinux said:
can you have one with the Stock DPI please appreciate it and thx
Click to expand...
Click to collapse
I don't know how to change it other than with an app once it's flashed.
apristel said:
Anyone get Android Pay working on this?
Click to expand...
Click to collapse
I have Android Pay working on the official LVY48F image, but I'm pretty sure the DPI change that was done with this will not work with it. Also had to hold off on rooting until after it was set up.
Sorry guys. I didn't mean to change it in the rom. I just wanted it set to 460 on my phone. I can give you a different build.prop file or correct it and upload again. Give me a second and I'll upload a correct build and a 2nd flashable zip to correct dpi only.
EDIT: Attached is the flashable zip to set the density to 560 which is stock. I am uploading the full ROM with it corrected and I will post the link here when it's done.
P.S. If someone tries the attached zip, please post and confirm that it fixed your DPI. Thanks!
Here's the link to the same build with the stock 560 DPI: http://d-h.st/K2Ee
thx boss the way o wanted appreciate it
Sent from my Nexus 6 using Tapatalk
I'm getting a system update notification. Go ahead, or ignore?
whiskeymcirish said:
I'm getting a system update notification. Go ahead, or ignore?
Click to expand...
Click to collapse
You shouldn't be receiving an update message is you're running this build. Check your settings about and make sure that your build number is LVY48F. The update will fail if you try to accept it.
I got the update notification when I first booted but have not seen it since.
Was running the wrong version, 48C, my bad. Thanks guys.
whiskeymcirish said:
I'm getting a system update notification. Go ahead, or ignore?
Click to expand...
Click to collapse
If you ever get another one, don't update. It'll fail if you have a custom recovery. Even if you had stock recovery, you'll then lose root and be encrypted again. Wait for a ROM update.
^^ what he said, learned that the hard way
Sent from my Nexus 6 using Tapatalk
GuyInDogSuit said:
If you ever get another one, don't update. It'll fail if you have a custom recovery. Even if you had stock recovery, you'll then lose root and be encrypted again. Wait for a ROM update.
Click to expand...
Click to collapse
I think it'll fail even if you're so much as rooted.
#WhiteUIsMustDie, #EndDarkAppOppression
Hello everyone,
I'm running into an issue here, I flashed this ROM so I could activate my Project Fi invite. Unfortunately, I am getting the same message as I've gotten on every other ROM. First, I will get error T301 and cannot do anything I'm the app. Eventually I get around it by attempting to choose network operators in the settings but get stuck at the part where I am trying to transfer my number. After typing in all the account info and selecting next, I get a notification at the bottom of the screen that reads "something went wrong".
I've been wondering, do I need to flash any of the radios, base (baseband?), or any other of the things that are linked in the OP? If so, which ones?
P.S. I have never flashed a different radio or bootloader etc. on this phone since I purchased in May.
If that's not the case does anyone have any idea what could be the issue? Any help is highly appreciated and I thank you in advance!
Sent from my Nexus 6 using Tapatalk