My YeahPad A13 tablet was hanging in boot process. That's why I flushed a ROM (with LifeSuite).
Now the tablet starts normally and the android screen is shown, but no touch action
If I connect with the PC the device is always connected as mass storage and ADB/Fastboot do not work.
This makes another flushing difficult... I also cannot boot in recovery mode as no key combnation works...
Any advice? Please
help
noone an idea or some suggestions? :crying:
Hy! i dont know if my phone is completely bricked or not, i must say in the start. ill say what it happened today with it.
I decided to root my phone,i did it by flashing an update.zip file in recovery mode. This worked good, no problems.
After, i wanted to install cyanogenmod. i prepared 3 files of which i read i need. : -ClockWorkMod_Recovery_6.0.3.0 ,CM7-A5 ( the cyanogenmod version) and gaaps.
I entered the recovery mode, and i installed cwm, and made a backup of the system. after that, for no reason i could remember, i didnt continue installing CM7-A5,but i turned on the phone. everything worked, and looked ok. but after, i decided to finish the installation. But when i tryied to enter the recovery mode, i couldnt anymore. and it doesnt start in any way. The Pc is not recognizing it when its connected via usb. (only makes the sound that something is connected, but the filesystem isn't mounted and "adb" and "fastboot" from sdk android does not recognize it).
Now, i press the power button and it freezes at the android logo. Is there any thing i could do ?
Go to recovery?
mihai666 said:
Hy! i dont know if my phone is completely bricked or not, i must say in the start. ill say what it happened today with it.
I decided to root my phone,i did it by flashing an update.zip file in recovery mode. This worked good, no problems.
After, i wanted to install cyanogenmod. i prepared 3 files of which i read i need. : -ClockWorkMod_Recovery_6.0.3.0 ,CM7-A5 ( the cyanogenmod version) and gaaps.
I entered the recovery mode, and i installed cwm, and made a backup of the system. after that, for no reason i could remember, i didnt continue installing CM7-A5,but i turned on the phone. everything worked, and looked ok. but after, i decided to finish the installation. But when i tryied to enter the recovery mode, i couldnt anymore. and it doesnt start in any way. The Pc is not recognizing it when its connected via usb. (only makes the sound that something is connected, but the filesystem isn't mounted and "adb" and "fastboot" from sdk android does not recognize it).
Now, i press the power button and it freezes at the android logo. Is there any thing i could do ?
Click to expand...
Click to collapse
I'm at the same situation, after a mistake in a TCT Bootloader: i've formatted Misc and more partitions.. and now i'm only with a android logo.
The PC recognize a "Broadcom USB wireless modem" when i connect usb and press contemporary volume-.
Recovery not start (android logo) end download mode normally procedure (volume- and power) not working.
I'd like to test to reflash recovery by Recovery Installer By Sls13 v 2.0! but the driver not run with fastboot mode.. i've tried to install ADB Sdk suite and Java Sdk.. i've the usb-driver original, but my system (win7 32bit) make identification of Smart2 as "Broadcom USB wireless modem"..
i accidentally erased boot and bootloader.nor download mode nor recovery work and my pc recognize it like Broadcom USB wireless modem.Any solution?
Hi, I first want to say I am very thankful that you're reading this.
My problem is tablet ematic exp8 just suddenly got bricked .
When I hold power off + volume up or down button, the tablet turns on and doesnt offer me options and only goes to android logo again.
So I have downloaded ematic exp8 image file and usb drivers from their website. I followed some advice and tried to install those drivers but windows said that current version is up to date.
I tried to put image files on SD card but it didnt work.
I tried with LiveSuit but it didnt recognize my tablet.Althought he recognized IMG file.
I feel like usb driver might be the problem since USB debugging is turned off and in device manager Alcatel Andorid ADB interface is listed as driver.
If you have any suggestions please say so.
I have brick the tablet sgpt111us / s (when a black screen is loaded and the system itself does not start).
I tried to reflash the tablet
nothing succeeded.
I mostly took the firmware from xda forum did not work to flash the tablet
When I connected the tablet to a PC
then I saw that the PC does not see the tablet and then I tried
Go to the tablet in the recovery mode
and was surprised that adb sees only that very mode of recovery
Help me please.
PS I was removed by my brother
file build.prop and i from Russia):
Hi , my x96Air v2, 4/32 is stuck on logo and i cant access recovery mode to do a hard reset , is there any solution ?
and can anyone help me please.
PS i can flash roms using the sd card or Amlogic usb burning tool.
I also have an X96Air, 4/32....
After flasching my Image nothing happens on startup.
It takes a while until the logo appears. This is when the device comes to the emergency upload mode. This is the moment where the device becomes recognized by the usb burning tool from amlogic. (when drivers are correctly installed)
Be patient... after fail boots my device always comes back to an emergency upload mode after some time.
Stil searching the Backup of the Device with AM7256 Wifi chip. Have you this Backup?
rogi1 said:
I also have an X96Air, 4/32....
After flasching my Image nothing happens on startup.
It takes a while until the logo appears. This is when the device comes to the emergency upload mode. This is the moment where the device becomes recognized by the usb burning tool from amlogic. (when drivers are correctly installed)
Be patient... after fail boots my device always comes back to an emergency upload mode after some time.
Stil searching the Backup of the Device with AM7256 Wifi chip. Have you this Backup?
Click to expand...
Click to collapse
no i don't have it sorry