Hi,
So firstly my aux port on the phone was playing up so I bought the replacement part which included the speaker aswel as the new aux port. Took the old one out and put the new one in. The next day my phone rang so i answered it and i could hear the person on the other wnd but they couldnt hear me, when i opened up the voice recorder app there was no sound at all being recorded. I used a needle and checked there was no fluff in the mic which there wasnt but when I tries taking a video there was sound. Ive now found out there is a microphone for calls and voice recording and a separate one at the top for videos.
Is it best to replace the microphone on the main circuit board or would I be able to use the video microphone for calls?
Also when I plug in earphones with a built in mic that works fine for calls.
Any help will be appreciated!
P.s. I'm running CyanogenMod 10.2
Related
Mobile O2 XDA ATOM ROM WM5
Can someone guide me how to reset audio ?
When i get call i got ringing sound but mic and speaker not working at the same time if i open a audio file no sound listen and when i made or receive call all my audio not working including mic.
If i insert headset both mic and ear piece working good.
pls help me to get out of this problem.
tht problem was happened with me play any music and insert ur headset jack slowly and try 2 move it right and left the sound will back tht wht i did try it
Me too, and now it still thare aren't sound
there are any body tell me that it's happen from sound chipset or mic. plug not re-spring when me unplug mic.
Audio issue
Hey I am having the same issue. It seems to happen when after headphone use, so the audio jack could be the issue. I think the reccomendation to move the headphone pin in the jack might work.
But the advise is that if it works, do NOT use the head phones again.
Pirate31, you were right. I could get the audio to work after moving the head phone pin around in the audio jack, done gently. Thanks.
thx rvirdi if u want anything else tht my email [email protected]
ok
bye
the problem is O2 atom
try out a back entrance while the headset jack play media
will it solve the problem if we change the headset jack? my usb-port also kinda loose so I want to change both, are there any guides for this?
Hey all finally i got solution
Opened phone and unplugged all connections and replugged then my phone works fine.
There is a problem when we placed our phone hardly the connections are losses so this kind of problem happened.
Be careful when you open in the top part of phone (camera area).
Hi,
I have samsung vibrant, and have car stereo with bt handsfree, the problem is that the microphone of the car stereo has bad quality, the other side can't hear me.
The vibrant's mic is very good even if the phone is far away
My question is how I can disable bluetooth mic and use the phone internal one? Only the audio from the phone will be routed to the car stereo?
I searched all over the net but nothing, just a lot that searching solution like me.
Searched in android api for microphone disable,there is only mute procedure, no route/disabling.
Maybe some hack, I played with audio service menu of the sgs not found something there
Don't want use aux port for this
Please developers put attention that thing is usefull for a lot of users
Thanks
Your best bet would be to check the Samsung Support or their Forums and search there.
Your best bet would be to check the Samsung Support or their Forums and search there.
Alternatively you can check Here
UP
Sent from my GT-I9000 using xda premium
deliad said:
Hi,
I have samsung vibrant, and have car stereo with bt handsfree, the problem is that the microphone of the car stereo has bad quality, the other side can't hear me.
The vibrant's mic is very good even if the phone is far away
My question is how I can disable bluetooth mic and use the phone internal one? Only the audio from the phone will be routed to the car stereo?
I searched all over the net but nothing, just a lot that searching solution like me.
Searched in android api for microphone disable,there is only mute procedure, no route/disabling.
Maybe some hack, I played with audio service menu of the sgs not found something there
Don't want use aux port for this
Please developers put attention that thing is usefull for a lot of users
Thanks
Click to expand...
Click to collapse
Did you ever find a solution for this? I noticed that Moto Voice and the Google app allow for this, but I can't find a way to do this during phone calls.
Hello.
One day my i9100 got into water and after that it started to behave oddly. It has problems with speaker (I can't hear voice calls) and people who I call can't hear me so it has faulty microphone too. The tricky part is that headphone jack works fine, same as microphone on the bottom, I can talk with people with connected headphones and another speaker works (eg. it makes beepy sounds when I start to record the movie).
I have replaced speaker module (upper one) with no success. Same for software change (stock to CM9).
Do you have any clue what can I do with it?
Hi! First of all, I did research about this, and tried every possible solution posted in this forum, but without success...
The problem is with my s2 main microphone (down one). When making a call sometimes the receiver can't hear me, but if I switch to speaker, then its ok. So I test the mic with voice recorder app, and yes...I've mic problems...I've to scream so the mic barely detect any sound. I tried to open the rubber hole that is over the mic but nothing.... The rare thing is that if I hit the phone, or shake it, suddenly mic works fine...its like random .
what can it be??
Hello, first I want to apologize for my english, it's not my first language but I will try my best.
Well, I have a Blu Life 8 XL with KitKat 4.4.2 (I updated it to Lollipop, then the mic issue starts... I restored factory default config and now its on KitKat again) and after 2 weeks my mic stopped working. I tried everything on the net to fix it but nothing seems to work (disabling noise reduction, cleaning the mics, the paper on the back of the battery that works on nexus 5, disabling google search, etc).
Making tests with the phone's sound recorder I suddenly found this:
When I record something the app seems to be recording (the needle moves just as if the mic capture the sound) but when I play it only noise comes out (like ground noise, static noise).
But if I plug my earphones and play the same recording, now I can hear what I recorded, so the mic is not the problem I guess.
If I record something with the earphones mic, I can hear it with the earphones, or the phone speaker.
Also when calling, I must use the loudspeaker or the earphones becouse otherwise people can't hear me.
Any recomendation, help or something?