Related
Hi , this is My Contribution for Neo L device , i make this kernel use Latest source from Sony , All What you want is available in this kernel :victory:
dont look my status as Junior Member , i never use this account since first use , So look this , dont surprised . . . . this is my first post about development , my post looks Bad
im very thanks to mechmetal for Amazing source Build , so Here we go. . . .this build i get a permissions from Mechmetal ,im very thanks for it
FUSION™ Kernel For Phoenix
/*DISCLAIMER
#include /*
* Your warranty is now void.. LOL I guess you knew it already.*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone
* bootloops and alarm does not go off. Please do some research if you have any
* concerns about features included in my kernel before using it! YOU and only
* YOU are choosing to make these modifications.*/
1.CHANGELOG
-New COOL BOOTLOGO!! , Created By me !! Fajar jarbu
-Add SFB Net Scheduler
-Allow CPU Unaligned Access
-ARM JIT Compiler For Packet Filters
-Based On 4.1.b.0.621 (LATEST for Neo L!!! by jarbu)
-CPU VDD Levels Sysfs Interface
-Cpus NEON & Snapdragon Optimizations
-Optimized ARM RWSEM Algorithm-Optimized CRC32 Algorithm
-Proportional Rate Reduction For TCP
-Reclaim Some Ram
-Add Governors
- InteractiveX,Smartassv2
-Add IO Schedulers
- SIO,V(R)
-Update Android Drivers
-Update Jhash(Mark 2 & Non Mark)
-Update Linux Kernel To 2.6.32.60(LATEST!!)
-Update LZO
-Various Other Patches, Tweaks, Fixes...etc
-FIX Bluetooth
-FIX WIFI
-Add Snappy Compression Support For zRAM
-Apply Patches To RCU
-Change Memory Allocation Method
-Change Memory Split Method
-Enable CFQ I/O Scheduler
-Set Correct Default Min/Max CPU Frequency
-Switch To Snappy Compression For zRAM From Default LZO
-Update CWM To 6.0.3.0
-Update Snappy Drivers-CROSS BREDEER Support!
-Enable KSM For Page MErging
-DynaMic Compresion for page Caching
-OC Up to 1.6 Ghz
-Update KSM
-update LMK
-2 way Call recording
-Joystick wireless
-reconfigured Again in ALL Version
Compiled with GCC LINARO TOOLCHAIN 4.7.3
GOOD CONFIGURATION
SMARTASSv2 + SIO
#Download Links
Version v.4
http://d-h.st/9gS
Version v.4.1
https://www.dropbox.com/s/sxm01ypmwty4jha/Fusion v4.1.img
CREDIT
-Mechmetal
-Wedgess
-Anonymous
-vishal android freaks
:good:
2 posts not needed, mate.. Either get this one off or the one from neo development forum
Regards,
vishal_android freak
vishal_android freak said:
2 posts not needed, mate.. Either get this one off or the one from neo development forum
Regards,
vishal_android freak
Click to expand...
Click to collapse
im sorry about that mate , cause Neo-L dont have specific forum in xda , so iam confuse where i post my work :/
Jarbu12 said:
im sorry about that mate , cause Neo-L dont have specific forum in xda , so iam confuse where i post my work :/
Click to expand...
Click to collapse
That's ok.. Request the mod to delete this..
Regards,
vishal_android freak
Wow you're awesome buddy
Thx for your kernel
I hope Neo L will get specific Room in order we can feel more better. By the way thanks so much for you bro Dev @Jarbu12.
That's so cool, great work bro. So keep developing Dev.
RenderBroken's Custom Kernel for
CM11/AoCP/OmniRom & SlimKat
Witty paragraph goes here
Contributors
These are the people that have helped out this thread in their own way. Whether it by helpful info or by being or giving me motivation to do what I am doing.
@iXNyNe, @trevor.bman, @razen_kain, @mr-cook, @royahaun, @david72262, @SteveMurphy and so on. Practically EVERYONE on both my threads are helpful and contribute to the discussion.
Donators(I KNOW RIGHT?! I never set out to make money doing this but to have someone give me their hard earned money blows me away. THANKS!
@royahaun
@NePanicPas
SGH-S959G Users: Please see Post #2
Changelog
General List
* remove deleted files
* initramfs: update initramfs
* Setup OUT folder to creating Zips
* Build: Setup build script
* Defconfig: Setup for i777
* Build: set -O3 Flags
* stweaks: add profiles for governors
* mach-u1: restore stock TMU profile
* Update recoveries 22/03/2014
* cpufreq: zzmoove v0.8 SOURCE: https://github.com/zanezam/cpufreq-governor-zzmoove/commits/master
* mali: make sampling more lazy
* Revert warning fixes
* bcmdhd: wifi_pm to save power while suspended and when proximity is detected
* build: fix some warnings
* build: revert some of warning fixes
* exynos: tmu: Fix warning and silence spam
* ARM: cache: assume 64-byte L1 cachelines for ARMv7 CPUs
* drivers: Fix general compile warnings and cleanup
* drivers: usb: Fix compile warnings and cleanup
* drivers: misc: Fix compile warnings and cleanup
* drivers: mmc: Fix compile warnings and cleanup
* drivers: input: Fix compile warnings and cleanup
* drivers: power: Fix compile warnings and cleanup
* drivers: video: Fix compile warnings and cleanup
* drivers: media: Fix compile warnings and cleanup
* exynos: Fixes and mess cleanup
* arm: mm: Fix compile warnings for dma
* net: Fix compile warnings
* block: BFQ I/O scheduler v7r2 for linux 3.0.y source: http://algo.ing.unimo.it/people/paolo/disk_sched/sources.php
* ARM: smp: Wait just 1 second for other CPU to halt Currently, the busyloop waiting for a 2nd CPU to stop takes about 4 seconds. Adjust for the overhead of the loop by looping every 1ms instead of 1us.
* arm: LoUIS cache maintenance API
* build: update defconfig + undervolt busfreq and set a higher threshold, this aims battery saving
* pm-hotplug: add tegrak's secondcore support + pm-hotplug enable/disable depending on the selected cpu governor
* input: mxt224: tweak touchscreen when plugged to charger
* Revert "mm: Don't use CMA pages for page cache"
* mm: Don't use CMA pages for page cache All layers of the page cache may take extra references to pages to avoid migration. This is fine for general movable pages but renders CMA pages useless as they cannot be allocated for contiguous m
* arm: remove intelli_plug
* intelli_plug: switch to use dedicated high priority workqueue
* intelliplug: add GT-i9100 touch input
* intelli_plug: tune for dual core mode
* Intelliplug 2.0
* bcmdhd: update to 1.61.58 from google edition jf (4.3) Applied to smdk44x2 appears to help with dialing issues on wifi. jf firmware is ideal also.
* ondemand: Add support to consider other cpu load when scaling frequen… …cies
* update defconfig
* ext4: prevent kernel panic in case of uninitialized jinode
* ARM-spinlock: use ticket algorithm for ARMv6+ locking implementation
* ARM: Add optimised swahb32() byteswap helper
* ARM: L1 cache optimization
* ksm: check and skip page, if it is already scanned
* input: touchscreen: revert mxt224_u1 changes
* limit gpu to 440mhz
* Revert "stweaks: remove charge control"
* power: sec_battery_u1: Add charge current interface
* touchscreen: mxt224_u1: use platform data struct directly to set touchscreen threshold values
* touchscreen: prevent applying movhysti setting when the screen is off
* tegrak's touchmove modification to set pixel sensitivity which is known as vitalij value
* mali: create a device file in /sys/module/mali/parameters to read current utilization level
* stweaks: show which frequencies are vpll
* mach-u1: increase max voltage on buck3 (for gpu)
* stweaks: vpll configuration
* mali: exynos4_pmm.c: fix typo
* mali: experimental vpll mode exynos4_pmm.c credits: dorimanx https://github.com/dorimanx/Doriman...mmit/a90b0f4398736d83651a61627fc751efc25970b4
* stweaks: remove charge control
* Revert "power: sec_battery_u1: Add charge current interface"
* Fix typo
* Fix typo
* Update systemcat
* mach-u1: Update TMU profile
* tweak systemstatus script
* build: fix mali libs path
* Update recoveries 07/03/2014
* build: add mali blobs for jb roms also add lights lib needed for BLN
* build: create ramdisk's cpio
* stweaks: change hotplug options for mono-core only
* stweaks: add cpu hotplug control
* arm: auto_hotplug: add max_online_cpus feature https://github.com/mathkid95/linux_lg_kitkat/commit/9f913bc150f0bb36152343cc994cbc65f866fa8f
* cpufreq: remove scaling_available_freqs as it is already in the cpu_undervolting module
* stweaks: restore customconfig.xml merged some test stuff by mistake in https://github.com/gustavoss/androi...mmit/17f5eda45047215f4aeb71210b04dd520759041c
* build: include mali blobs for jb kernel
* build: new build script based on codeworkx's script: https://github.com/codeworkx/GT-I9100_ClockworkMod-Recovery/blob/jellybean/build.sh
* block: bfq: prevent aliased requests from starving other I/O
* build: update defconfig
* iosched: prevent aliased requests from starving other I/O
* sched/nohz: Rewrite, fix and add more accurate load-avg computation
* pegasusq (based on ondemand): cpuidle detection
* sched: use cpu capacity to decide if a ILB is needed
* cpupower: update the cpu_power according to cpu load
* ARM: cpu topology: add debugfs
* ARM: cpu topology: Add asym topology flag for using cpu0 1st
* ARM: topology: Add a topology update notification
* ARM: topology: Add a cpu_power function
* ARM: topology: Update topology according to current sched_mc mode
* ARM: topology: save cpu id of each core
* sched: Ensure cpu_power periodic update
* ARM: 7182/1: ARM cpu topology: fix warning
* ARM: 7011/1: Add ARM cpu topology definition
* cpufreq: ondemand: Remove unnecessary synchronization attempt
* drivers: misc: cpu undervolting driver clean up
* fix typos M = 10^6 m = 10^-3
* system watch scripts
* init: update ramdisk and recoveries, add cpu load to gpuwatch and rename it to systemwatch
* build: fix kernel command line
* stweaks: fix typo
* sched: enable gentle fair sleepers by default Also set the right description from /kernel/sched/features.h I don't see any side effect when using it and it might save some battery
* initramfs: clean up
* mach-exynos: 2MB audio buffer
* build: set SELinux as permissive by default
* Updates from samsung source drop XXUGLM3
Comprehensive List:
Source History
Current Build Date:2/4/2014
Build Downloads
STweaks Download:
https://play.google.com/store/apps/details?id=com.gokhanmoral.stweaks.app&hl=en
Kernel Credits
gokhanmoral, codeworkx and all CM team for their wonderful work (99% of kernel and commits)
franciscofranco, faux123, myfluxi, neobuddy89, omni team and geeckodev for porting mali and s3cfb drivers to smdk4210 ( 0.999%, most of the tweaks in the kernel) Gustavo_s and wiithepeng for getting me through a rough spot
Sources:
https://github.com/RenderBroken/android_kernel_samsung_smdk4412
Testers:
@razen_kain
SGH-S959G Users
Since the the SGH-S959G uses a different partition for its recovery, flashing my kernel will not change the recovery. So to remedy this @mr-cook has created a flashable zip that flashes TWRP 2.6.3.0 onto your device. This zip can be downloaded here:
TWRP 2.6.3.0
You can just flash this after flashing my kernel.
Useful Tips and Apps
Those out there that have contributed better ways to do things will have their ideas posted here so everyone can benefit from their knowledge.
First tip is brought to us by @razen_kain : There's an app called Online Nandroid Backup. It makes a backup without booting into recovery and you can specify the recovery you're using and which partitions you want to backup. Even better you can name your backups which I find VERY helpful when jumping between ROMs.
Play Store Link
reserved 2
Sorry guys. STweaks got jacked on this one and I have to rebuild.
It boots on Onmi and WiFi and everything seems to work...the only issue is that STweaks is not showing as stated before.
Sent from my SGH-I777 using XDA Premium 4 mobile app
Does it matter if we are on cwm or twrp? If not I'll try and flash tomorrow and report back.
Sent from my SGH-S959G using xda app-developers app
bondlolo said:
It boots on Onmi and WiFi and everything seems to work...the only issue is that STweaks is not showing as stated before.
Sent from my SGH-I777 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Sweet, very glad to hear. You should also notice an increase in performance regardless of STweaks. I believe I fixed the problem and am going to rebuild tonight .
grave_digger said:
Does it matter if we are on cwm or twrp? If not I'll try and flash tomorrow and report back.
Sent from my SGH-S959G using xda app-developers app
Click to expand...
Click to collapse
No it does not matter.
RenderBroken said:
Sorry guys. STweaks got jacked on this one and I have to rebuild.
Click to expand...
Click to collapse
on both of them ? or just the omni version
eddiemc12 said:
on both of them ? or just the omni version
Click to expand...
Click to collapse
Both im afraid. You can flash build 12/22/2013 for CM11 and it works though.
RenderBroken said:
Both im afraid. You can flash build 12/22/2013 for CM11 and it works though.
Click to expand...
Click to collapse
CM11 im good here.. i didnt try stweaks and also the homescreen shortcuts get removed after update besides that i like it the buttons work
I see build 12-23....is that a good build or is that the build with stweaks messed up?
Sent from my SGH-I777 using Tapatalk 4
txnolesfan93 said:
I see build 12-23....is that a good build or is that the build with stweaks messed up?
Sent from my SGH-I777 using Tapatalk 4
Click to expand...
Click to collapse
same one but still decent not unuseable
Working well over here.
Edit: Holy crap, man. This speed is incredible. Battery life is improved, too. Omni Kernel.
Sent from my SGH-I777 using XDA Premium 4 mobile app
I am working on some merge issues and should be able to build tomorrow. I have to fly out to Alabama though so it wont be til the evening. Soon I will have the kernel ironed out for the i777. Till then consider these build as beta. They wont brick your phone but MAY have minor issues. But just because they may doesn't mean they will have problems. For my rom I was going to replace the stock kernel with the custom built one but I think I will leave the stock one and have the kernel in OP#2. I know some ppl like to have to rock stability the stock kernel has but others want the bleeding edge. I am here to say that I can make both happy.
Kind Regards,
Render
Something i noticed is that recovery says (in twrp Omni) that my phone is a i9100 so it dont let me install nightlies...maybe you have to change the recovery to a i777 recovery?
Thanks for your awesome work anyway!
bondlolo said:
Something i noticed is that recovery says (in twrp Omni) that my phone is a i9100 so it dont let me install nightlies...maybe you have to change the recovery to a i777 recovery?
Thanks for your awesome work anyway!
Click to expand...
Click to collapse
Can you check your build.prop?
ro.product.device (or ro.build.product) should be "i777" or "SGH-I777"
Sent from my SGH-I777 using Tapatalk 2
@RenderBroken,
Perhaps semantics, but it may be worth noting (in the OP by the Omnirom build) that the recovery is TWRP? I admit, I assumed that it was CWM until seeing one of the recent posts.
I plan to link to it in the OMNI OP if that's alright with you. This provides an easier/faster route to a compatible recovery.
massive cheers, and thank you for this.
-Cyril
================================================================================
EDIT: the filename "RenderOMNI-kernel-12-23-CWM.zip" suggests CWM, but flashing the zip definitely gives TWRP, and my kernel version reads: [email protected] #8 <<that's you, correct?
This kernel makes the device noticeably snappier. :beer:
Well my phone is definitely snappier. There's only one little bug I've noticed. If i select to disable backlight illumination from settings/buttons menu they will turn off for a minute but will come back on and stay on until i go back in the menu and turn them on then off again. For now i just have them set for one second and that seems to be working fine. This is on the cm11 version
Sent from my SGH-S959G
thanks for doing this render!
Sent from my SGH-I777 using XDA Premium 4 mobile app
Some words before,
Credits: Lyapota, Flar2, Kozmikkick, Xmister, N3ocort3x, Faux123, Showp1984, TripNRaVeR, Maxwen and all other
My special thx this time goes to Lyapota for his teaching about dt.img (DTS files)
all thx (if i get some) goes to the people above...without those i´m nothing....why...because i can not write kernel codes and patches i can only use it...so this is a copy and paste kernel if you want
Its my own private kernel.....so there want not be many feature requests as i only use this private...maybe different way to s2w (want to have a fixed pos to swipe and not all over the display) and what the future brings
Why i made it...one kernel has cpuquiet but no s2w....an other has s2w but no cpuquiet...so i want both together....
So you see i dont want to steel others work...or something other..just want to share this with people there like or dont like
Code:
[COLOR="Red"][SIZE="5"]CHANGELOG[/SIZE][/COLOR]
Changelog 1.6
-going to try something new :) (and oldschool) ;)
-removed oc
-removed volt interface (uv)
-enabled AVS (Adaptive Voltage Scaling) (for better battery)
(more info here: [URL="http://www.edn.com/design/power-management/4430500/Improving-energy-efficiency-with-adaptive-voltage-scaling-"]http://www.edn.com/design/power-management/4430500/Improving-energy-efficiency-with-adaptive-voltage-scaling-[/URL]
-enabled MSM DCVS for CPU/GPU (a very efficient and wide range of Dynamic Clock)
-removed some i2c things that is not needed
-updated git
Changelog 1.5
-complete remade (had sometimes a strange not wake up even with power button)
-deactivated freq limiter (faux123)
-deactivated max screen off freq (flar2)
-newest Sound Control version (yes with hd) (faux123)
-updated git
Changelog 1.4
-Sound Control Updates (faux123)
-tcp Westwood
-kexec (untested..so let me know)
-some small tuning...
-reduce log to gain mem
-updated git
Changelog 1.3
-mpdecision again (original hotplug-now very smooth)
-removed intelli hotplug (eats to much battery)
-color control (thx faux123)
-tuned interactive a bit
-interactive as standard (also please try..you will see smooth animations and fast wakeup)
-memory fixes (thx faux123)
-mako optimations (thx lyapota) [for test versions...i prefer mpdec)
-wifi driver update (thx lyapota)
-updated git
-on epic cidadel 3d benchmark 57.8 (mpdec) to 55 (on mako) ]on ultrahigh graphics mode]
-removed all version..again gsm only...theres more needed...and i cant test
-exfat
Changelog 1.2
-better Intelli Hotplug (faux123)
-mako test version without intellidemand/active-gives a wake up lag
-I2C (Faux123)
-frandom (Faux123)
-Dimmer (lyapota)
-many speed fixes (mainly from Faux123...also flar2 and lyapota) [see git for more info]
-power suspand (Faux123)
-hopefully all versions (not only GSM)
-O3 optimation
-changed gpu -50 to max 644 mhz
-updaded git
-some things more i forgot :)
Changelog 1.1
-Intelli Hotplug (disabled Touch boost by default-better bat) [use Faux app to controll it]
-GPU 220-694
-Smartmax gov
-Intellidemand gov
-Intelliactive gov
-Power Suspend [use faux app to control it]
-test version mako hotplug
-updated git
Changelog 1.0
-complete rebased with 4.4.4 kernel source
Changelog 0.6
-added missing fastcharge... :)
-one small tip...to disable mpdecision complete: delete file mpdecision from /system/bin
(copy to sd before..so you can it push back)
Changelog 0.5
-builded from HTC Source (...means no git clone)
-compiled with linaro arm cortex a15 toolchain on ubuntu machine
-OC/UV patches from flar2 and lyapota
-Sound patches from faux123 and lyapota
-prima W-lan driver
-fix gpu gov simple ondemand from flar2
-max screenoff mhz from flar2
-cpuquiet hotplug from lyapota
-s2w/s2s from flar2
-system rw from flar2
-gboost from flar2
-pocket protection from flar2 (works fine here)
-fastcharge
-init.d script for s2w/s2s/fastcharge/pocket protection
-no verzion or other only gsm (not atm)
-ramdisk is from viper sense...means no problems from superuser
-pocket detection (flar2) [SIZE="1"]...must be a other patch why i had problems on elementery[/SIZE]
Download Kernel 1.6
http://sourceforge.net/projects/ale...Kernels/Alex-V_One_M8_Kernel_1.6.zip/download
Download Kernel 1.6 viper edit
http://sourceforge.net/projects/ale...s/Alex-V_One_M8_Kernel_1.6_viper.zip/download
-why swipe up and not the classic way swipe right...because did you ever try to find the right position to swipe right lets say 01:30 am to check the time...you wont it find fast because of the htc symbol thingy you wont find it fast...so better swipe up with pocket protection on (works for me fine for me on this kernel..got some problems on other)
GITHUB SOURCE:
https://github.com/Alex-V2/One_M8_4.4.3_kernel
updated Source to 4.4.4
old versions:
Code:
1.5
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.5.zip/download[/url]
1.5
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.5_viper.zip/download[/url]
1.4
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.4.zip/download[/url]
1.3
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.3.zip/download[/url]
1.3 mako
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.3_mako_test9.zip/download[/url]
1.2 intelli
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.2.zip/download[/url]
1.2 mako test
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.2_mako_test7.zip/download[/url]
Kernel 1.1 Intelli hotplug
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.1.zip/download[/url]
Kernel 1.1 Test version mako hotplug
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.1_mako_v3.zip/download[/url]
1.0
[url]http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/Alex-V_One_M8_Kernel_1.0.zip/download[/url]
XDA:DevDB Information
Alex-V_Personal_M8_Kernel, Kernel for the HTC One (M8)
Contributors
Alex-V
Kernel Special Features:
Version Information
Status: Stable
Created 2014-12-02
Last Updated 2014-12-02
init.d script include:
Code:
#!/system/bin/sh
#Set Wake Gestures
echo 0 > /sys/android_touch/wake_gestures
#Set Sweep2wake
echo 4 > /sys/android_touch/sweep2wake
#Set Doubletap2wake
echo 0 > /sys/android_touch/doubletap2wake
#Set Sweep2sleep
echo 2 > /sys/android_touch/sweep2sleep
#Set Wake vibration strength
echo 40 > /sys/android_touch/vib_strength
#Set Pocket Detection
echo 1 > /sys/android_touch/pocket_detect
#Set Camera Launch
echo 0 > /sys/android_touch/camera_gesture
#Set FASTCHARGE
echo 1 > /sys/kernel/fast_charge/force_fast_charge
#Set Max screen off
echo 1 > /sys/devices/system/cpu/cpu0/cpufreq/screen_off_max
#gboost settings
echo 1 > /sys/devices/system/cpu/cpufreq/ondemand/gboost;
and for the kernel.xml on viper
Code:
<category title='@wake_options'>
<list title='@sweep_wake' summary='@sweep_wake_summary' file='/sys/android_touch/sweep2wake'>
<entry name='@enable' value='4'/>
usefull things/threads
-for bootloops because off corrupt data partition (thx mike1986. )
http://android-revolution-hd.blogspot.de/2014/09/how-to-fix-random-reboots-on-htc-one-m8.html
-this was my starting guide in the past (htc desire) to compile kernels (thx Droidzone)
http://forum.xda-developers.com/showthread.php?t=1377467
- learning guide all about kernel (thx csec) one x
http://forum.xda-developers.com/showthread.php?t=2276889
- android Image Kitchen -- Unpack/Repack Kernel+Recovery Images, and Edit the ramdisk.
http://forum.xda-developers.com/showthread.php?t=2073775
s-off for t-mobile (sunshine s-off) (no other way until now)
http://forum.xda-developers.com/showthread.php?t=2794020
for cpu changes (oc/uv/gov/sound and other) Trickster Mod
https://play.google.com/store/apps/details?id=com.bigeyes0x0.trickstermod&hl=de
original 4.4.4 Sense Kernel (stock kernel)
http://sourceforge.net/projects/alexvhtcroms/files/HTC_One_M8_Kernels/kernel_4.4.4_v2.zip/download
Sweet!
Nice one mate, still rockin your kernel on my one x.
Wow sweet,the pocket detection works...nice
Sent from my HTC One_M8 using Tapatalk
EternalAndroid said:
Sweet!
Click to expand...
Click to collapse
myheroduane said:
Nice one mate, still rockin your kernel on my one x.
Click to expand...
Click to collapse
hdorius said:
Wow sweet,the pocket detection works...nice
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Yeah...thx for feedback
Nice to see that you decided. And I doubt it will long time "personal"
Will this work on liquid smooth?
Nope this is sense kernel
Sent from my HTC One_M8 using Tapatalk
Whoooooo!!! thanx Alex ?
hdorius said:
Nope this is sense kernel
Sent from my HTC One_M8 using Tapatalk
Click to expand...
Click to collapse
Is there a aosp kernel that supports.multi ROM do you know?
lyapota said:
Nice to see that you decided. And I doubt it will long time "personal"
Click to expand...
Click to collapse
Lol..yeah and thx again for the dt
teaching
lukes91 said:
Whoooooo!!! thanx Alex ?
Click to expand...
Click to collapse
??
Alex-V said:
Lol..yeah and thx again for the dt
teaching
??
Click to expand...
Click to collapse
Hi
thanks i will try. This Kernel does not Support Double Tab to Wake right?
gr
okti35 said:
Hi
thanks i will try. This Kernel does not Support Double Tab to Wake right?
gr
Click to expand...
Click to collapse
Sure..simply change the values in the init.d script and reboot
Hi Alex
Thanks for a nice kernel.
Maybe I get this wrong, but I can't find sys/kernel/fast_charge/force_fast_charge file, so not sure whether fastcharge is implemented or not as I can't check whether it is 0 or 1
ckpv5 said:
Hi Alex
Thanks for a nice kernel.
Maybe I get this wrong, but I can't find sys/kernel/fast_charge/force_fast_charge file, so not sure whether fastcharge is implemented or not as I can't check whether it is 0 or 1
Click to expand...
Click to collapse
yeah...you are right...also not find it..i forgot to add it to my git source...just compile 0.6 to bring it back...update will come in 1-2 h (i had added it to my test source..)
thx for the check
Changelog 0.6
Code:
-added missing fastcharge... :)
-.....one small tip...to disable mpdecision complete...delete the file mpdecision from /system/bin (copy to sd before..so you can it push back)
Alex-V said:
Changelog 0.6
Code:
-added missing fastcharge... :)
-.....one small tip...to disable mpdecision complete...delete the file mpdecision from /system/bin (copy to sd before..so you can it push back)
Click to expand...
Click to collapse
Or just rename it to mpdecision.bak and reboot
Good kernel so far
Vegito Kernel for Lenovo Vibe K5/K5 Plus
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Features:
Insecured
adb runnable as root
init.d support
Upgraded to latest Linux version 3.10.107
Now powered by AROMA Installer.
Built Using UBERTC- 4.9 Aarch64 Toolchain along with optimizations like GCC optimization for cortex-a53 ,O3 & Graphite flags.
ThunderPlug - A Dynamic Hotplug Driver by @varun.chitre15 - Takes down all seven cores when phone goes to sleep leading to significant battery savings
Dynamic Fsync - A driver originally written by faux123- Disables Fsync when phone is being used causing significant IO boost.
Added Adreno idler GPU Alogrithm - An efficient workaround for msm-adreno-tz's overheads. Developed by @arter97
Disabled Gentle fair sleepers
F2FS Support ( Import from Motorola Source 7.0 Nougat )
Enabled arch power
Automatic busybox installation
Compatible with systemless root
KSM ( Kernel Sample Merging ) enabled
Uses live Ramdisk patching during flashing, so need not worry about ROMs on which you are flashing on.
Added Double Tap to Wake and Sweep2Wake
Added sound control
Added simple GPU Algorithm - An add-on for MSM-Adreno TZ GPU Governor. Developed by @faux123.
KCAL advanced color control [V2](RGB, Saturation, Value, Contrast, Hue)
CIFS support
zSwap support - A Virtual compressed memory pool - Can be used as a swapping devices for extra RAM.
Reduced idle power consumption
Wakelocks blocked by default thanks to @franciscofranco
Vibration Intensity Control: Let’s you adjust the intensity at which your phone vibrates
IOScheduler
block: Added Sio IOScheduler
block: Added FIOPS IOScheduler
Additional IOSchedulers: BFQ v7r8(recommended)
Governors enabled: ondemand, interactive:
Add sysinterface for GENTLE_FAIR_SLEEPERS [toggle switch]
Frandom driver- Fast Kernel Number Generator.
Kexec Hardboot Supported
Performance enhancements
Added USB fast charge
Introducing Intelli_thermal - A new thermal protection mechanism
Support for CRC-Toggle (Disabled by Default in Misc. TAB).
Improved square root algorithm.
Disabled some debugging
Relax thermal throttling values
Disabled MMC CRC check for extra 30% boost in IO
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Support for the new PowerSuspend algorithm.
Optimized Console FrameBuffer for upto 70% increase in Performance.
Support for Larch Power feature (should improve Battery-Life).
Powersuspend mode
Added bunches of TCP Congestion Algorithm
Downloads
Vegito 6.4 ( Stock based )
Vegito 7.2 ( Lineage based )
Note:
Users can also update my kernel within 1 click by using my own app
Free Version
Paid Version
Google+ Community (Beta testing and releases)
https://plus.google.com/u/0/communities/107248021342303532678
Important:
Do not flash this over other custom kernels!
You should only flash Vegito over the kernel that came with your ROM
Reporting bugs
Grab a logcat, and a console ramoops (if random rebooting) or a dmesg (any other issues) right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
See how to submit a bug report for the appropriate place to report your bug
INSTRUCTIONS
Just flash the zip in twrp and you are good to go!
XDA:DevDB Information
Vegito kernel for lenovo vibe k5, Kernel for the Android General
Contributors
Dreamstar
Source Code: https://github.com/nikitsharma15/Vegito_vibe_k5
Kernel Special Features:
Version Information
Status: Beta
Created 2016-12-04
Last Updated 2017-10-31
Changelog
Code:
Vegito 5.5 - 27/March/17
Power efficient workqueue patches (squashed).
Synced with LineageOS
Cpufreq: interactive: reduce timer with screen off
Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Kernel: reduce overheat
Revert ThunderCharge Control – A driver to control the charging current rate developed by [user=4309448]@varun.chitre15[/user]
Revert MSM_Hotplug driver it contain some problem o.O
Fix simple_ondemand crashing
Disable More Debugging
Possibly More I Missed.)
Vegito 5.2 - 05/Feb/17
Code:
ThunderCharge Control – A driver to control the charging current rate developed by [user=4309448]@varun.chitre15[/user]
Fix simple_ondemand crashing
Disable More Debugging
Possibly More I Missed.)
Vegito 5.0 - 24/Jan/17
Code:
MSM Hotplug - a custom qualcomm based hotplugging driver by @myflux
F2FS Support ( Import from Motorola Source 7.0 Nougat )
Compatible with systemless root
KSM ( Kernel Sample Merging )
Vegito 4.2 - 20/Dec/16
Code:
Kexec Hardboot Supported [Exp]
Performance enhancements
Other Improvements
Vegito 4.0 - 10/Dec/16
Code:
Added Intelli_thermal v3.0 by [user=3332811]@faux123[/user]
Frandom driver- Fast Kernel Number Generator.
Added USB fast charge
Fsync On/Off switch.
Added Sweep2Wake && Sweep2Sleep
Added simple GPU Algorithm - An add-on for MSM-Adreno TZ GPU Governor. Developed by [user=3332811]@faux123[/user].
Uses live Ramdisk patching during flashing, so need not worry about ROMs on which you are flashing on.
Additional IOSchedulers: BFQ v7r8(recommended)
Built Using UBERTC- 4.9 Aarch64 Toolchain along with optimizations like GCC optimization for cortex-a53 ,O3 & Graphite flags.
Vegito 3.0 - 06/Dec/16
Code:
-Added Double Tap to Wake
-Added Faux sound control 3.6
-ThunderPlug - A Dynamic Hotplug Driver by [user=4309448]@varun.chitre15[/user] - Takes down all seven cores when phone goes to sleep leading to significant battery savings..
-Vibration Intensity Control: Let�s you adjust the intensity at which your phone vibrates
-Additional IOSchedulers: BFQ v7r8(recommended),FIOPS
-Disabled MMC CRC check for extra 30% boost in IO
-Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
-Support for the new PowerSuspend algorithm.
-Optimized Console FrameBuffer for upto 70% increase in Performance.
-Support for Larch Power feature (should improve Battery-Life).
-Disabled some debugging
Vegito 2.0 - 05/Dec/16
Code:
Added Dynamic fsync ( Thanks to faux123 )
Added Adreno idler GPU Alogrithm
Enabled arch power
[B]Added some IOScheduler
[/B]Sio IOScheduler
Fiops IOScheduler
Tripndroid IOScheduler
fifo IOScheduler
[B]Added Governors:
[/B]Alucard
Nightmare
SmartassV2
Bioshock
Lionheart
CPU Boost
Powersuspend mode
[B]Added bunches of TCP Congestion Algorithm
[/B]
Vegito 1.0
Code:
- Initial Release
Reserved
Announcement
Introducing my own app to update my kernels within 1 click.
Get it from play store- Vegito Kernel Updater
Please Rate or give your feedback for this app.
Does it work on k5 plus a6020l36? Is it possible to have 2 ring tones to wake up in the next version of your kernel? Thanks for the work.
Wow, Thank you very much for this Kernel, Works With the plus Variant or only the normal?
Rodrigo Rodrigues said:
Wow, Thank you very much for this Kernel, Works With the plus Variant or only the normal?
Click to expand...
Click to collapse
I am not sure but you can give it a try
V2.0 Update
Changelog
Added Dynamic fsync ( Thanks to faux123 )
Added Adreno idler GPU Alogrithm
Enabled arch power
Added Bunches of IOScheduler
Added Bunches of Governors:
Powersuspend mode
Added bunches of TCP Congestion Algorithm
Disabled some debugging.
Download link on first page as usual
Please add double tap to wake
Hey @Dreamstar, you have plans of making this Kernel for Marshmallow and Nougat? And any chance we can get DT2W feature? Thank you very much for your work
Rodrigo Rodrigues said:
Hey @Dreamstar, you have plans of making this Kernel for Marshmallow and Nougat? And any chance we can get DT2W feature? Thank you very much for your work
Click to expand...
Click to collapse
Yes possibly in next update
Wow, a version for Nougat and marshmallow too? @Dreamstar
I just tested and it works in the a6020l36 Brazil variant.
I very much hope that in version 3.0 come DT2W.
Thank you for the work.
@akashi23
Thanks for confirmation,
@Dreamstar
In there any downside of using this kernel on plus(snapdragon 616) version.
DreamStar
I realized something, after a while the cpu governors and schedulers change by default again, same thing with cpu frequencies if changed, I realized that a lot of times also do not appear cpu governors in the kernel managers.
Sorry for bad English.
Please also add USB fast charging. Thanks
And if there's any chance make kernel working on custom ROM too.
And also try to add under clocking/over clocking voltage, CPU.
V3.0 Update
Changelog
Added Double Tap to Wake
Added Faux sound control 3.6
ThunderPlug - A Dynamic Hotplug Driver by @varun.chitre15 - Takes down all seven cores when phone goes to sleep leading to significant battery savings..
Vibration Intensity Control: Let's you adjust the intensity at which your phone vibrates
Additional IOSchedulers: BFQ v7r8(recommended),FIOPS
Disabled MMC CRC check for extra 30% boost in IO
Support for ARCH_Power to reduce Power-Consumption and increase Battery-Life.
Support for the new PowerSuspend algorithm.
Optimized Console FrameBuffer for upto 70% increase in Performance.
Support for Larch Power feature (should improve Battery-Life).
Disabled some debugging
Download link on first page as usual
Dreamstar Thanks for the new kernel version, I'm going to test now.
Dreamstar will i be able to test the kernel in cm 12.1 or it really only works on rom stock?
Please @Dreamstar make this Kernel for Custom ROM's...
Thank you very much for your work
@Dreamstar
Thanks, man! for this kernel. Finally for someone who wants customization on stock ROM.
But I am currently moving to CM 13, So if possible make kernel Compatible with CM 13, please.
My device is Lenovo vibe k5 plus (snapdragon 616) Indian variant.
Thanks again.
Good work keep it up
HandBag Kernel
"Every single feature" Held together with duct tape and magic
Development for the Moto X Style/Pure seems a little quiet, so I decided to patch together my own kernel. I think this is the perfect chance to learn git and the build system for android. Feature requests are welcome!
Disclaimer
Please note that this is my first kernel and that stability and battery life are not guaranteed. Actually, nothing is guaranteed. I am not responsible for bricked devices or lost data. Flash at your own risk.
You will most definitely have to adjust the default settings. Expect lags and fun stuff.
Also note that this kernel is meant for LineageOS based roms. Tested and running daily on XT1575.
Features
Based on Lineage OS source
Additional CPU Governors (Alucard, ElementalX, Despair, Chill, IntelliActive, Lionheart, BioShock, BluActive, Wheatley, ZZMove, Impulse, Relaxed)
Additional I/O Schedulers (Deadline, NOOP, Maple, Row FIOPS, SIO, SIOPlus, TripNDroid, VR, Zen)
Additional Hotplug Drivers (Alucard Hotplug, Autosmp, Bricked Hotplug, MSM Hotplug, Lazyplug) Causes laggy wakeup
Additional TCP congestion algorithms (Default westwood)
KSM/uKSM
Overclock/Underclock
Voltage control
Wake Gestures by flar2
Fsync, Inputboost, Touchboost, and Wakelock Toggles
Kexec Not needed yet
Ofast Actually Os for now (Kernel gets too big and there's no decompression for aarch64)
UBER Toolchain 6.0 Linero Toolchain 6.3.1
Dynamic Fsync
Adreno Idler/Boost
AnyKernel2 Installer
Backlight Dimmer
Color control (KCal)
To-Do
I dunno, you tell me.
Installation
Flash in recovery
Note: AnyKernel2 will use your existing ramdisk. It's recommended to flash over the kernel that came with your rom or a previous version of my kernel. Refer to AnyKernel2 for restoring after a bad flash.
Downloads
See Downloads Tab under thread title: https://forum.xda-developers.com/devdb/project/?id=20678#downloads
There are two branches:
msm - Uses the stock msm_core_ctl to handle hotplugging
hotplugs - Uses custom hotplugging solutions (Currently only bricked_hotplug)
Special Thanks and Credits
flar2
franciscofranco
nathanchance
frap129
dirtyhank
showp1984
engstk
faux123
neobuddy89
ZaneZam
yank555-lu
HashBang173
varunchitre15
Cl3Kener (UBERTC)
osm0sis (AnyKernel2)
trashy111 (For build server hardware)
... and various other helpful developers!
If I missed someone who should be on here,
please feel free to let me know.
XDA:DevDB Information
HandBag Kernel, Kernel for the Moto X Style (Pure)
Contributors
XDleader555
Source Code: https://github.com/XDleader555/HandBag-Kernel-Clark
Kernel Special Features:
Version Information
Status: Testing
Created 2017-05-15
Last Updated 2018-02-27
Changelog
02/27/18 - v2.3.5
handbag-msm:
Added more overclock values
Separated voltage control to upper and lower bounds for fine tuning
Merged Security commit for WPA exploit
07/31/17 - v2.3.3
handbag-msm:
Forgot to re-enable msm_core_ctl hotplug (oops)
Older Changelogs:
07/30/17 - v2.3.2
Add voltage control
07/28/17 - 4:59PM - msm branch - v2.3.1
Bring back alucard governor
Bring back power efficient workqueue
Bring back Dynamic fsync
Bring back uKSM and patches
Add LCD Notifier
Disable trace_printk
Disable sched_hrtick
07/28/17 - 12:39AM - msm branch - v2.3
Re-enable msm_performance (Default Kernel Hotplugging)
Update Zen Tune from 4.5 to 4.10
Enable Partial Resume
Revert Stack Protection from Strong to Normal
Add Software CRC toggle
Revert Alucard, Autosmp, bricked, msm_hotplug, lazyplug Hotplugs
Revert Dynamic fsync
Revert powersuspend and state_notifier
Temporarily Revert power efficient work queues
Revert KEXEC patches until someone complains
Temporarily Revert uKSM
A lot of other various cherry picks reverted
06/23/17 - 3:23PM - v2.2
Add Alucard Hotplug and Autosmp Hotplug
Add Alucard CPU Governor
Set some cpu defaults on boot from frap129's electron kernel
Cherry-pick f2fs patch to avoid syncing kernel panics
Increase thermal threshold from 46C to 60C. Light load happens around 55C, so we're always throttling
Disable thermal core control (You can re-enable it if you like)
Dynamic Fsync
Add CIFS support
REVERT: wrong vibe control commit
06/15/17 - 11:41PM - v2.1
REVERT: Merge F2FS changes up to May 20th 2016
REVERT: Small updates to msm mdss
REVERT: Switched to bricked_hotplug as default
REVERT: Show cpu voltages (Not actually useful)
REVERT: Update linux from 3.10.102 -> 3.10.105
REVERT: zRam, zSwap, zMalloc Updates
REVERT: linux/random backport from linux 4.1.40
REVERT: Those various "optimizations"
REVERT: Anything relating to state_notifier and system_wq
Bring back PowerSuspend. Why fix what ain't broke.
Add patch to avoid f2fs kernel panic/bootloop when downgrading/upgrading (sidegrading?) to v2.1
05/31/17 - 12:50AM - v2.0
Merge F2FS changes up to May 20th 2016
Small updates to msm mdss
Switched to bricked_hotplug as default
This should really be 1.9.1, but I already made it 2.0. Too lazy to fix ¯\_(ツ)_/¯
05/30/17 - 1:37AM - v1.9
Switch toolchains from UberTC 6.0 to Linero 6.3.1
Add relaxed cpu governor
Show cpu voltages (No editing unfortunately)
Slimbus overclock
UNREVERT: zSwap, zMalloc Updates
Removed powersuspend (not needed)
linux/random backport from linux 4.1.40
Various optimizations I probably missed
05/26/17 - 3:38AM - v1.8
UNREVERT: Update linux from 3.10.102 -> 3.10.105
UNREVERT: zRam updates
disabled zSwap (I don't think anyone uses this, correct me if I'm wrong)
converted msm_hotplug to use state_notifier
converted bricked_hotplug to use state_notifier
05/25/17 - 8:14PM - v1.7.1
Fixed overclock frequency not showing
Fixed enabling/disabling of state_notifier in tuning apps (turns off hotplug suspend)
converted msm_hotplug to use state_notifier I need to touch up on C
05/24/17 - 10:16PM - v1.7
Cleaned source code tree
REVERT: Update linux from 3.10.102 -> 3.10.105
REVERT: Moved msm_hotplug to system_wq
REVERT: Interactive CPU governor pulled from Pixel source
REVERT: zRam, zSwap, zMalloc Updates
REVERT: Overclocking/Underclocking (Just temporary, ran out of time)
05/24/17 - 3:16AM - v1.6
Update linux from 3.10.102 -> 3.10.105
Added Lazyplug
Moved msm_hotplug to system_wq
Avoided boot issue caused by msm_hotplug by setting Lazyplug as default. (msm_hotplug still works if set by user)
05/22/17 - 2:37AM - v1.5
Wake Gestures: Fixed touchscreen not responding when enabling gestures with the screen off
Wake Gestures: Fixed touchscreen not responding in ambient display
Wake Gestures: Phone call detection
Set msm_hotplug as default
Tweaked msm_hotplug defaults slightly
Increased default idle frequency for bricked_hotplug to 600mhz
05/21/17 - 7:38AM - v1.4
Added Wake Gestures by flar2 (DT2W, S2W, S2S)
Added uKSM
Interactive CPU governor pulled from Pixel source (Seems to have fixed our crashing issue)
Added Despair and Chill CPU governors
Power efficient work queue mode (wq_power_saving)
KEXEC
Updated zmalloc and zram
Adreno Boost
Overclocking/Underclocking
05/17/17 - 7:50PM - v1.3
Removed msm_core_ctl to prevent conflicts with bricked hotplug
Renamed bricked_hotplug to prevent confusion
Added msm_hotplug v2.4
Fixed touchboost for those who actually like that
Added color calibration (KCAL)
05/17/17 - 5:57AM - v1.2
Added Governors (IntelliActive, Lionheart, BioShock, BluActive, Wheatley, ZZMove, Impulse)
Added Adreno Idler
Small optimizations
Disabled Touchboost by default
Added Kernel PowerSuspend
05/16/17 - 12:33PM
Fixed backlight dimmer
Removed userspace governor
05/15/17 - 3:29AM
Initial Release
It's highly recommended that you apply your own settings with a kernel manager until I add bootup scripts
Frequently Asked Questions
Q: How do I logcat?
A: You'll need adb or root
Through adb:
Code:
adb logcat -b all -d > %userprofile%/Desktop/logcat.txt
Through your phone:
Download a terminal app
Code:
su
logcat -b all -d > /sdcard/logcat.txt
It'll take about 10 seconds for the command to work. Preferably catch the log as soon as you boot.
Upload the logcat found at the output directory as an attachment.
Q: Where is hybrid mode for powersuspend?
A: https://forum.xda-developers.com/showpost.php?p=72405702&postcount=92
Q: Which Roms work with this kernel? Does it work on CAF Roms?
A: Lineage OS. No guarantees for other Roms, but users have reported that it works on:
Mokee OS
Resurrection Remix
Dirty Unicorns (CAF?)
AICP
CrDroid
Q: What app should I use to tune this kernel?
A: I prefer EX Kernel Manager, but Kernel Adiutor works well too.
Q: Can we get X feature?
A: Working on it.
Nice
Will give it a try!
Great work
---------- Post added at 12:39 PM ---------- Previous post was at 12:38 PM ----------
aakashverma0007 said:
Nice
Will give it a try!
Click to expand...
Click to collapse
Waiting for your new video on this kernal's reviews
Nice work! I was gonna do something similar but I never had time. If I do I might do it for caf-aosp roms. I will flash this kernel with resurrection remix and give some feedback! Very nice job
confirmed working on Mokee OS nightly for 20170514
This won't work with something like CypherOS which is AOSP based right?
you can try... backup your boot.img in recovery, if anything goes wrong you can always recover from that
Confirmed working on Resurrection remix latest weekly.
Bro please include KCAL support if possible. The piece I have does not render good colors. It would be awesome then. Thanks for your efforts.
Bwangster12 said:
This won't work with something like CypherOS which is AOSP based right?
Click to expand...
Click to collapse
I get massive bluetooth battery drain on CypherOS. Trying a different kernel MAY be something that could fix that?
Bwangster12 said:
I get massive bluetooth battery drain on CypherOS. Trying a different kernel MAY be something that could fix that?
Click to expand...
Click to collapse
The Bluetooth drain is just cypher os itself. Other people said they had that problem even on they're Google plus page. Just use a different room like crdroid- resurrection remix, or just plain old lineage, or mokee. You got some nice options.
Curlyfry2121 said:
The Bluetooth drain is just cypher os itself. Other people said they had that problem even on they're Google plus page. Just use a different room like crdroid- resurrection remix, or just plain old lineage, or mokee. You got some nice options.
Click to expand...
Click to collapse
First of all... I feel like no one has recognized the BT drain on CypherOS... so thank you for that. Trying other roms is what I've been doing. I'm currently on Tesla and like it a lot... but have desparately wanted a rom thats as similar to a Google Pixel as possible. Pure Nexus hasn't been updated to Nougat and CypherOS seemed to be what I wanted. Things like Lineage, Tesla, RR, Dirty Unicorns all have their own things. At least with Tesla, I installed Substratum and pixel themes... just not exactly like the Pixel-ness of CypherOS.
Any plans for hotplugging? I'm not really requesting it just wondering what you have in store for the future.
Curlyfry2121 said:
Any plans for hotplugging? I'm not really requesting it just wondering what you have in store for the future.
Click to expand...
Click to collapse
I plan on packing in as many features as possible. Hotplugging is on the list after I get the CPU Governors and boot up scripts in.
Bwangster12 said:
I get massive bluetooth battery drain on CypherOS. Trying a different kernel MAY be something that could fix that?
Click to expand...
Click to collapse
You can try disabling Bluetooth scanning under location setting or disable one of the relevant wakelocks using my kernel with your favorite kernel manager. (I prefer EX Kernel Manager)
XDleader555 said:
I plan on packing in as many features as possible. Hotplugging is on the list after I get the CPU Governors and boot up scripts in.
You can try disabling Bluetooth scanning under location setting or disable one of the relevant wakelocks using my kernel with your favorite kernel manager. (I prefer EX Kernel Manager)
Click to expand...
Click to collapse
Nice, will test any new versions released as soon as possible. Keep up the good work ?
Works on dirty unicorns, which is a caf based rom, so I'm surprised this is working and there's nothing really wrong except in ex kernel manager and I tried kernel auditor I enable backlight dimmer and when I turn the screen off and back on the brightness is much higher than what I have it set as. Anyone else have that?
Same thing on Resurrection remix
XDleader555 said:
I plan on packing in as many features as possible. Hotplugging is on the list after I get the CPU Governors and boot up scripts in.
You can try disabling Bluetooth scanning under location setting or disable one of the relevant wakelocks using my kernel with your favorite kernel manager. (I prefer EX Kernel Manager)
Click to expand...
Click to collapse
YAY thanks! really and truly this phone needs better hotplug to manage the battery better.
Curlyfry2121 said:
Works on dirty unicorns, which is a caf based rom, so I'm surprised this is working and there's nothing really wrong except in ex kernel manager and I tried kernel auditor I enable backlight dimmer and when I turn the screen off and back on the brightness is much higher than what I have it set as. Anyone else have that?
Same thing on Resurrection remix
Click to expand...
Click to collapse
I haven't cherry picked the code for backlight-dimmer yet. Currently having some issues with getting Ofast to work. I'll probably keep Ofast disabled and work on adding features.
EDIT:
Apparently, I did cherry pick it. I'll look into it.
EDIT2:
Fixed, seems like flar2 did something different for the Nexus 5x backlight. Check the downloads tab for the most recent kernel.