[ROM] [4.4.2 KitKat] N5110UEU2CNE2 Stock Rooted DeOdexed for GT-N5110
This is the official N5110UEU2CNE2 KitKat v4.4.2 (US Version) from Samsung for GT-N5110
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Features
Deodexed
Knox Removed
Rooted
Busybox
Boot Sound Disabled
Requirements
1) A GT-N5110
2) PhilZ / TWRP recovery
3) Kitkat Bootloader or Civato's Custom Kernel Thanks him for his great work!!!
Installation
1. Backup your device, in case you wanted to revert back.
2. Wipe Data/Factory Reset in recovery.
3. Flash the ROM
4. Reboot
5. Run SuperSU
6. If you get an error saying No Binary installed, reboot to recovery and install the latest SuperSU using recovery.
7. Reboot
Download Links:
http://www.androidfilehost.com/?fid=23501681358543946
MD5: 203B51DCB02FB87512CDF6155272D972
Enjoy!!!
XDA:DevDB Information
N5110UEU2CNE2 Stock Rooted DeOdexed, ROM for the Samsung Galaxy Note 8.0
Contributors
pvsgh
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: GT-N5110 Only
Version Information
Status: Stable
Created 2014-06-05
Last Updated 2014-06-11
Reserved!!!
One more
One more, just in case!!
Will test this out when my note come is in the next few days!!
Are there any notable differences in the U.S. released update as apposed to the European one that I am running now?
Sent from my GT-N5110 using XDA Premium HD app
Has anyone had issues getting wifi to activate after flashing? I updated recovery to Philz and clean flashed (a couple of times).
theoctillion said:
Has anyone had issues getting wifi to activate after flashing? I updated recovery to Philz and clean flashed (a couple of times).
Click to expand...
Click to collapse
I'm on NE 1 and had similar issues until I flashed the full TAR (not just A ZIP version). I believe its because Samsung wrote something in the update that requires the new Bootloader to get any connectivity.
Sent from my GT-N5110 using Tapatalk
rwilco12 said:
I'm on NE 1 and had similar issues until I flashed the full TAR (not just A ZIP version). I believe its because Samsung wrote something in the update that requires the new Bootloader to get any connectivity.
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
THANKS! This worked perfectly. For anyone else, I got the ne1 bootloader from http://forum.xda-developers.com/showthread.php?t=2761468 and flashed via ODIN.
Yes you need to have latest bootloader installed to get a working WiFi, this is specified in Requirements in 1st post.
Sent from my SGH-T889 using Tapatalk
pvsgh said:
Yes you need to have latest bootloader installed to get a working WiFi, this is specified in Requirements in 1st post.
Sent from my SGH-T889 using Tapatalk
Click to expand...
Click to collapse
True, although the latest SphereKat kernel from Civato apparently allows proper working wifi even without updating to the new bootloader. Worth it for those who want kitkat but havent upgraded yet, and who don't want to trip knox counter by installing the new bootloader.
sefrcoko said:
True, although the latest SphereKat kernel from Civato apparently allows proper working wifi even without updating to the new bootloader. Worth it for those who want kitkat but havent upgraded yet, and who don't want to trip knox counter by installing the new bootloader.
Click to expand...
Click to collapse
Thanks, updated the requirements section.
glockman4519 said:
Are there any notable differences in the U.S. released update as apposed to the European one that I am running now?
Sent from my GT-N5110 using XDA Premium HD app
Click to expand...
Click to collapse
I'd be interested in knowing that as well.
@BB said:
I'd be interested in knowing that as well.
Click to expand...
Click to collapse
Proper 5 band wifi support (not crippled due to British regulations) and multiuser on stock.
Sent from my LG-D803
Will zip file on internal memory or extSD work?
If I put the N5110UEU2CNE2_Stock_Rooted_DeOdexed.zip file on either the internal memory or extSD will TWRP be able to flash it?
CenturionFive said:
If I put the N5110UEU2CNE2_Stock_Rooted_DeOdexed.zip file on either the internal memory or extSD will TWRP be able to flash it?
Click to expand...
Click to collapse
TWRP seems to have some problems on extSD, if you are using TWRP I would recommend to copy the zip file on internal SD.
I personally use Philz and it works with both.
pvsgh said:
Yes you need to have latest bootloader installed to get a working WiFi, this is specified in Requirements in 1st post.
Sent from my SGH-T889 using Tapatalk
Click to expand...
Click to collapse
where can i find the bootlader? my wifi isnt working.
raf1919 said:
where can i find the bootlader? my wifi isnt working.
Click to expand...
Click to collapse
Go get Civato's kernel for your device and flash it. It will bring back wifi without updating bootloader which will trip counter. There is a link in OP.
Sent from my GT-N5110 using XDA Premium 4 mobile app
cant get update to stick
Trying to mod my N5110 with the instructions in the OP. It's currently at over the air 4.4.2
Can't seem to get Philz recovery to stick. It came up once, but now if I boot into recovery its gone back to the OEM recovery. Also, root did not take effect after flashing the .zip.
Any ideas?
Where can I get "Kitkat Bootloader"?
bigtexan99 said:
Trying to mod my N5110 with the instructions in the OP. It's currently at over the air 4.4.2
Can't seem to get Philz recovery to stick. It came up once, but now if I boot into recovery its gone back to the OEM recovery. Also, root did not take effect after flashing the .zip.
Any ideas?
Where can I get "Kitkat Bootloader"?
Click to expand...
Click to collapse
If you took the OTA 4.4.2 update you should already have the KK bootloader.
Have you tried rooting with CF-Auto-Root? Once you are rooted the Flashify app can install a custom recovery that is in the "recovery.img" format.
ramjet73
Related
Hello everyone,
STOCK+ Team ($omator & Grooby) are proud to bring you the latest rooted kernels based on samsung stock kernels that you may find in ROM by Samsung.
Why should i use this kernel?
Our kernels are uber-minimal modification of stock kernel used only for rooting (no custom recovery is installed). So the kernel it's like stock just rooted, and there is small chance (or any chance) that it will be detected as modified by service center at the first look
Please find latest of kernels listed below:
ROOTED! I9100XXLPH - ICS (4.0.3) - CL: 1104396 - B.Date: 16-02-2012 -[/b] Touch CWM Recovery Download HERE!
ROOTED! I9100XXLPB - ICS (4.0.3) - CL: 99600 - B.Date: 29-01-2012 - Samsung Recovery Download HERE! or Touch CWM Recovery Download HERE!
Instructions:
1. Flash zImage.tar of choosen kernel using odin (you will find it in package)
2. enable usb debugging in settings->applications
3. while still connected and odin/kies is turned off, run RUNME.BAT (also in package)
4. Install latest Superuser.apk from market!
5. Profit!
If you like our modifications, support us with even a little donation for a beer -> Click to donate!
Don't forget to follow our service at Twitter (@SamsungUpdates) or (soon) Samsung-Updates.com
Best regards for all XDA-DEVELOPERS members! we love ya!
* reserved *
* reserved again *
Looking good mate. Good luck
Sent from my GT-I9100 using XDA App
Touch recovery added to stock kernels, you can choose now if you want a kernel which is only ROOTED with all rest stock by samsung or, base samsung kernel with touch recovery included and rooted
Enjoy!
Thank you..
Is odin version lony ?
goodluck! trying this maybe in the near future
tonz22 said:
Thank you..
Is odin version lony ?
Click to expand...
Click to collapse
Yup, its odin version
Looking forward to see more stock kernel from you. Good luck
Can we get a CWM flashable zip of the touch based version?
Sorry for my stupid question but is this only for ICS? I'm little confused, or can we use this for stock to?
Sent from my Samsung Galaxy SII using Tapatalk
Its for ICS as stated in first post if you want to request any other kernel let me know in this thread.
Also, for now we provide only ODIN images, which is most suitable for people with or without CWM already installed.
Thanks!
(ODIN is in the package.)
I havent used odin in a whille. Could someone please refresh my memory, which do I flash this under, pda, phone or csc? I obviously know this isn't bootloader
Grooby said:
Its for ICS as stated in first post if you want to request any other kernel let me know in this thread.
Also, for now we provide only ODIN images, which is most suitable for people with or without CWM already installed.
Thanks!
(ODIN is in the package.)
Click to expand...
Click to collapse
Like i thought, I got confused.by the stock if you could do a kernel for stock ROM with touch recovery it would be awesome.
You just got Samsunged from Tapatalk
Do we need to execute runme.bat if the phone is already rooted and has su installed?
First of all its a stock rom (dont mix it with team name which is STOCKPLUS) + the touch CWM added (su will install automatically) so just flash with ODIN as PDA and enjoy samsung rom with good recovery and root
secondly, if you got a su installed then you dont need to run runme.bat, just install superuser from market or from package shipped with kernel (adb install Superuser.apk)
Enjoy!
Nagarebozhi said:
Like i thought, I got confused.by the stock if you could do a kernel for stock ROM with touch recovery it would be awesome.
You just got Samsunged from Tapatalk
Click to expand...
Click to collapse
It is stock kernel with touch recovery to get stock rom with touch recovery just install stock ROM (LPB) and then flash this kernel simple and clean
MrBadgerMilk said:
I havent used odin in a whille. Could someone please refresh my memory, which do I flash this under, pda, phone or csc? I obviously know this isn't bootloader
Click to expand...
Click to collapse
put it as PDA
Grooby said:
put it as PDA
Click to expand...
Click to collapse
It will increase custom binary count huh?
Sent from my GT-I9100 using XDA App
Grooby said:
It is stock kernel with touch recovery to get stock rom with touch recovery just install stock ROM (LPB) and then flash this kernel simple and clean
Click to expand...
Click to collapse
But you said it was for ics?, I want a kernel for 2.3.5/2.3.6
But
Grooby said:
Its for ICS as stated in first post if you want to request any other kernel let me know in this thread.
Also, for now we provide only ODIN images, which is most suitable for people with or without CWM already installed.
Thanks!
(ODIN is in the package.)
Click to expand...
Click to collapse
"You just got Samsunged from Tapatalk"
Stock Jelly Bean ROM for unlocked Transformer Prime
Info:
Stock ROM based on WW Jelly Bean 10.4.2.15 (Android 4.1.1)
Fully deodexed
Rooted
New JB bootloader included
TWRP 2.2.2.1 recovery for JB included
Can be flashed over any ROM
Warning:
Use this rom at your own risk. I am not responsible for any bricked devices.
I strongly recommend enabling NVFlash before flashing this ROM here. You CAN NOT enable NVFlash on JB bootloader!!
Use only recovery made for JB or you can brick device.
Instruction:
Download the ROM
Copy the file to your device and reboot into recovery
Wipe data/cache (factory reset) - optional
Flash the ROM update zip
Reboot and wait for final flash and then let the device boot up (it will take some time)
Enjoy Jelly Bean
Download:
WW_epad-user-redvirus-10.4.2.15.zip - 336.68 MB
MD5:a2ab74c20fd3bd1946396c1d0370c4b5
Version without bootloader and recovery:
Only for those with JB bootloader!!
WW_epad-user-redvirus-10.4.2.15-forJB.zip - 328.98 MB
MD5:a62c643ec27597c771b73d7f62ecbade
Thank you sparkym3 for your guide
Is step 3 (Wipe data/cache (factory reset)) absolutely required when updating from .28 rooted ROM for unlocked devices?
Stock ASUS update doesn't require wipe when you update from the older ASUS ROM.
Will this work without wipe if I'm updating from rooted 9.4.2.28 ROM?
Do we get to choose not to install bootloader and recovery during install for us that already have both the jb bootloader and jb recovery?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
CrazyCoder said:
Is step 3 (Wipe data/cache (factory reset)) absolutely required when updating from .28 rooted ROM for unlocked devices?
Stock ASUS update doesn't require wipe when you update from the older ASUS ROM.
Will this work without wipe if I'm updating from rooted 9.4.2.28 ROM?
Click to expand...
Click to collapse
You can install this ROM without wipe. /info updated
andy_rose said:
Do we get to choose not to install bootloader and recovery during install for us that already have both the jb bootloader and jb recovery?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
Click to expand...
Click to collapse
I made a version without bootloader and recovery.
redvirus said:
I made a version without bootloader and recovery.
Click to expand...
Click to collapse
Thanx man, appreciate it
Downloaded your latest JB for people already with new bootloader and TWRP but it failed to flash.
Can you send me recovery.log?
10x !!!!!!!!!!!
The md5 is fine but it just would not start got failed at the very beginning, I dont know if a recovery log is possible since it never recovered from anything.
Edit: Should have added I was on Craigacgomez US JB with TWRP.
Edit 2: Runing a log, should be ready in a few.
Edit 3: Sent!
Just for the record: I have a CM10 preview rom with CWM 5.8.3.4 currently on my Prime. Am I able to just wipe and flash this like any normal rom? I was told I'd have to revert back to stock ICS before flashing the new release or it might brick.
Sent from my SPH-D710 using xda premium
will try this when i get home and report back!
Hello i am on android 4.0.3 WSG Rom. Am i able to flash this rom?
Sent from my Transformer Prime TF201 using xda app-developers app
Ok the WW for JB bootloader and TWRP worked perfectly my earlier problem was I had TWRP 2.2.2.0 installed for some weird reason once on TWRP 21 it flash no problem. In my case I had to also reflash Superuser 3.2
Thanks for this Rom. Just a question. I have a US TF201 rooted and unlocked. All I am hoping to do is to install stock JB. Can I install this Rom or no? The only other Rom is see that is stock is the one that says JRO03C and that one is for US... But I don't know if it's completely based on the official release for the TF201. Thought it was based off of the update for the 300 or something. I appreciate the help
Sent from my SCH-I535 using Tapatalk 2
antnyp85 said:
Thanks for this Rom. Just a question. I have a US TF201 rooted and unlocked. All I am hoping to do is to install stock JB. Can I install this Rom or no? The only other Rom is see that is stock is the one that says JRO03C and that one is for US... But I don't know if it's completely based on the official release for the TF201. Thought it was based off of the update for the 300 or something. I appreciate the help
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I think its the same official tf201 US version many people prefer the ww tho and if i'm wrong someone will be shortly to correct me lol
---------- Post added at 01:21 AM ---------- Previous post was at 01:14 AM ----------
Nevermind i am wrong but i am running the US update one and is sold
I installed it and it work great, got the buildprop tweak done and browser2ram install, have no complaint, its very smooth and fast, I don't see any reason so far to OC and my Prime is one of the first BC0, still running strong
Thanks for this. Any chance of an odex version too for boot speed?
Sent from my HTC Sensation Z710e using xda premium
Works great on my prime. Thank you!
Had too flash the rom twice before it worked ( maybe because I delete the complete tablet incl. Rom before)
been having trouble since manually updating to official jb not being able to root or get adb to wrk to root just flashed this and it done it all for me ... thanks alot
Sent from my Transformer Prime TF201 using Tapatalk 2
adz63 said:
been having trouble since manually updating to official jb not being able to root or get adb to wrk to root just flashed this and it done it all for me ... thanks alot
Click to expand...
Click to collapse
I also manually updated, lost root, and can't get adb or fastboot to work... And now I'm stuck with the stock recovery, which won't let me select anything. Is there something I need to do first?
Hey guys,
So I recently rooted and installed CWM on my Samsung Galaxy Player 5.0 US Version. I am looking for a Kit Kat ROM. If there is any, could you guide me through how to put it on? Thanks!!!!
take a look here
jstein721 said:
Hey guys,
So I recently rooted and installed CWM on my Samsung Galaxy Player 5.0 US Version. I am looking for a Kit Kat ROM. If there is any, could you guide me through how to put it on? Thanks!!!!
Click to expand...
Click to collapse
http://true-android.blogspot.in/2014/03/update-galaxy-player-50-to-android-442.html?m=1:o
slogger001 said:
http://true-android.blogspot.in/2014/03/update-galaxy-player-50-to-android-442.html?m=1:o
Click to expand...
Click to collapse
I went to the link and clicked on the rom file, but all it showed up with was a list of developers.
Try this
jstein721 said:
I went to the link and clicked on the rom file, but all it showed up with was a list of developers.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2571357
slogger001 said:
http://forum.xda-developers.com/showthread.php?t=2571357
Click to expand...
Click to collapse
The CM rom did not work, neither did the GApps, I had a Paranoid Android Rom set aside but I wanted the PAC Rom. I cannot download a PAC Rom because there is none available. Any advice?
here
jstein721 said:
The CM rom did not work, neither did the GApps, I had a Paranoid Android Rom set aside but I wanted the PAC Rom. I cannot download a PAC Rom because there is none available. Any advice?
Click to expand...
Click to collapse
I think pac rom isn't fully developed u might get some bugs
http://forum.pac-rom.com/Thread-ROM-OFFICIAL-KitKat-4-4-2-YP-G70-PAC-man-4-4-AOSP:)
I went to the link but could not download it...when I hit download it just showed up with a bunch of developers
Sent from my LG-D800 using XDA Free mobile app
4.3.1
So since I couldn't get a Kit Kat Rom and GApps, I ended up putting on a Jelly Bean 4.3.1 ROM with GApps. It works all and well but now the soft touch buttons (menu, home, and back) do not work. How do I fix them
Try BeanStalk
I am currently using Meticulus's BeanStalk ROM which is based on Cyanogenmod.
It is quite quick, and it has a lot of features for customization.
Link:
http://forum.xda-developers.com/showthread.php?t=2613300
Installation Instructions:
Coming from a Pre KitKat ROM
Do a back up!
Do factory reset/ wipe (incl. /system)
In recovery: flash ROM zip file. (You WILL get an assert error!)
Read the warning on the screen.
Flash the ROM again!
Flash Gapps
Reboot.
Please keep in mind that your device needs to be rooted with a custom recovery in order for this method to work.
I did everything you said, including flashing it again, it came up with the same error. Any advice?
artofwinning said:
I am currently using Meticulus's BeanStalk ROM which is based on Cyanogenmod.
It is quite quick, and it has a lot of features for customization.
Link:
http://forum.xda-developers.com/showthread.php?t=2613300
Installation Instructions:
Coming from a Pre KitKat ROM
Do a back up!
Do factory reset/ wipe (incl. /system)
In recovery: flash ROM zip file. (You WILL get an assert error!)
Read the warning on the screen.
Flash the ROM again!
Flash Gapps
Reboot.
Please keep in mind that your device needs to be rooted with a custom recovery in order for this method to work.
Click to expand...
Click to collapse
Is this ROM for the US Version of the Samsung Galaxy Player 5.0 YP-G70? Because when I flashed it then tried to reflash it after the error, it came up with the same error.
jstein721 said:
Is this ROM for the US Version of the Samsung Galaxy Player 5.0 YP-G70? Because when I flashed it then tried to reflash it after the error, it came up with the same error.
Click to expand...
Click to collapse
I am using the YP-G70 with few issues, but it also advertises compatibility with the US version also.
artofwinning said:
I am using the YP-G70 with few issues, but it also advertises compatibility with the US version also.
Click to expand...
Click to collapse
Hmmmm...do you have any workarounds for it because it still comes up with an error when I flash it.
Sent from my LG-D800 using XDA Free mobile app
So I got everything on it, but I went to root checker app and it said my device does not have root accessibility...how do I fix that?
hi
jstein721 said:
So I got everything on it, but I went to root checker app and it said my device does not have root accessibility...how do I fix that?
Click to expand...
Click to collapse
I'm using beanstalk rom too. You have to root again your device, after installing beanstalk rom. hope this solve your problem.
Hello,
i have successfully installed the 4.4.2 KK original rom released on samfirmware 3 weeks ago on my 9205 LTE, and now i would like to downgrade to 4.2.2. Is there a method? Can it be done?
Thanks!
PS: What is the best ROM for mega?
Up!
http://forum.xda-developers.com/showthread.php?t=2773380
trurl3 said:
http://forum.xda-developers.com/showthread.php?t=2773380
Click to expand...
Click to collapse
Not answered at my question.
Tried flashing 4.2.2 and odin fails. What can i do?
corrystile said:
Not answered at my question.
Tried flashing 4.2.2 and odin fails. What can i do?
Click to expand...
Click to collapse
Nothing. You already installed the newest Knox Bootloader included with the Firmware and it can not be downgraded. If you do downgrade the Bootloader you will brick your phone. You can flash "ROMS" ( not Firmwares ) all you like from previous builds meaning you can flash a Custom 4.2.2 Rom but you can not downgrade the newest Knox Bootloader you installed.
DarkAngel said:
Nothing. You already installed the newest Knox Bootloader included with the Firmware and it can not be downgraded. If you do downgrade the Bootloader you will brick your phone. You can flash "ROMS" ( not Firmwares ) all you like from previous builds meaning you can flash a Custom 4.2.2 Rom but you can not downgrade the newest Knox Bootloader you installed.
Click to expand...
Click to collapse
Really?
I have now the TPH beta installed, but is only a beta, and i really want to return in 4.2.2 firmware, that's absolutely a s*it.
So can't donwgrade with or without root, cannot downgrade bootloader, nothing to return to stock 4.2.2?
All the lag from 4.2 just isn't worth going back. I had to go back to my iPhone 5S until the 4.4.2 came out. Now I'm on 4.4.2 and back on my android and loving it. Never want to go back to the iPhone again.
corrystile said:
Hello,
i have successfully installed the 4.4.2 KK original rom released on samfirmware 3 weeks ago on my 9205 LTE, and now i would like to downgrade to 4.2.2. Is there a method? Can it be done?
Thanks!
Click to expand...
Click to collapse
Yes you can, using a mobile ODIN
Ura535 said:
Yes you can, using a mobile ODIN
Click to expand...
Click to collapse
No!! he can't use odin to flash a 4.2.2 firmware because he flash the 4.4.2 kk firmware with the new knox bootloader if he try to flash an older firmware he will brick his phone. @corrystile you can use the MegaFire v11 to go back to jellybean 4.2.2 thanks to @megalomanic14 this is a TW base rom and it work on both 19200 and 19205.
Sent from my GT-I9200 using XDA Premium 4 mobile app
alexischino said:
No!! he can't use odin to flash a 4.2.2 firmware because he flash the 4.4.2 kk firmware with the new knox bootloader if he try to flash an older firmware he will brick his phone. @corrystile you can use the MegaFire v11 to go back to jellybean 4.2.2 thanks to @megalomanic14 this is a TW base rom and it work on both 19200 and 19205.
Sent from my GT-I9200 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And the rom also works on the i527m mega (Canadian version).
Sent from my SGH-I527M using XDA Free mobile app
Dark Angel can you help?
DarkAngel said:
Nothing. You already installed the newest Knox Bootloader included with the Firmware and it can not be downgraded. If you do downgrade the Bootloader you will brick your phone. You can flash "ROMS" ( not Firmwares ) all you like from previous builds meaning you can flash a Custom 4.2.2 Rom but you can not downgrade the newest Knox Bootloader you installed.
Click to expand...
Click to collapse
I bricked my phone. I restored my previous backup(MK1) made with efs pro. I restored all partitions except user data and system. Now it is not responding with any buttons. When i connect it with pc it shows qhsusb_dload. Can you please make a debrick image for it? Or tell me how can i fix it please.
Thanks
bricked
Damn
briked .sorry for my language
DaHulk07 said:
Damn
Click to expand...
Click to collapse
I got the same problem so listen to me
I installed a custom recovery 《philz recovery 》 then i wiped and format everything...
I reinstalled rom 4.2.2 with odin and i pressed nand erase all button and repartition button on odin and i flashed it then it work but i lost IMEI
Then i installed custom recovery and wipped all and reinstalled the 4.4.2 rom ...trattata
All going good and my phone gt i 9200 really working good
Try it bro
aliyassin said:
I got the same problem so listen to me
I installed a custom recovery 《philz recovery 》 then i wiped and format everything...
I reinstalled rom 4.2.2 with odin and i pressed nand erase all button and repartition button on odin and i flashed it then it work but i lost IMEI
Then i installed custom recovery and wipped all and reinstalled the 4.4.2 rom ...trattata
All going good and my phone gt i 9200 really working good
Try it bro
Click to expand...
Click to collapse
This would probably only work if you were still able to get into " Download Mode " on your phone.
Bricked but download mode good
Ok so I tried this and nothing will boot up now. Was the 4.2.2 a custom rom or stock ? I have a replacement screen that cant boot into firmware 4.3 or 4.4.
jimmykirby said:
Ok so I tried this and nothing will boot up now. Was the 4.2.2 a custom rom or stock ? I have a replacement screen that cant boot into firmware 4.3 or 4.4.
Click to expand...
Click to collapse
Yes this is a very big problem right now. I just ordered two replacements and none of them work
Sent from my SM-N900V using XDA Free mobile app
A work around for the cheap screen issue booting on stock 4.3 and 4.4 is to flash phils recovery and root followed by a zip install of a custom 4.4 rom. Boots right up . Also with custom recovery I have backed up stock 4.2 firmware on a diff. mega and used that to restore on my 4.4 mega. Not a true downgrade but bootable into stock rom. Took me a long while to figure this out. Hope this helps.
jimmykirby said:
A work around for the cheap screen issue booting on stock 4.3 and 4.4 is to flash phils recovery and root followed by a zip install of a custom 4.4 rom. Boots right up . Also with custom recovery I have backed up stock 4.2 firmware on a diff. mega and used that to restore on my 4.4 mega. Not a true downgrade but bootable into stock rom. Took me a long while to figure this out. Hope this helps.
Click to expand...
Click to collapse
How can you do that when there is no root?
Sent from my SM-N900V using XDA Free mobile app
Do you mean boot ? If so ; I removed battery to power off, then put it back , then hold volume down and home button and power at the same time to get into download mode. Then used Odin to flash custom recovery. I used Phils recovery. My issue began when I allowed 4.3 OTA update. I lost boot and stock recovery but could still get into download mode.
jimmykirby said:
Do you mean boot ? If so ; I removed battery to power off, then put it back , then hold volume down and home button and power at the same time to get into download mode. Then used Odin to flash custom recovery. I used Phils recovery. My issue began when I allowed 4.3 OTA update. I lost boot and stock recovery but could still get into download mode.
Click to expand...
Click to collapse
There is no root for 4.4. These are the phones with the problems because can't do anything right now. Does the file you have work for 4.4? Have you tried for that version firmware?
Sent from my SM-N900V using XDA Free mobile app
Is there a rooted 5.1.1 rom for Odin anywhere?
Preferably already deodexed.
Thanks
error666 said:
Is there a rooted 5.1.1 rom for Odin anywhere?
Preferably already deodexed.
Thanks
Click to expand...
Click to collapse
I have a stock rooted ROM here and am working on a deodexed version but I see no benefit/need for creating an Odin version:
http://forum.xda-developers.com/tmo...l/how-to-update-to-g900tof6-5-1-1-pc-t3141404
just asking . apparently with this root method of using a permissive kernel, the privacy mode is broken. any idea if that can be fixed and keep root?
benefit is that it's everything in a single package. including bootloader, modem etc.. twrp is good for flashing a different rom of the same version but for upgrades it's better to use odin. imho.
error666 said:
benefit is that it's everything in a single package. including bootloader, modem etc.. twrp is good for flashing a different rom of the same version but for upgrades it's better to use odin. imho.
Click to expand...
Click to collapse
Those ROM's flash everything but recovery.
Exactly. And u don't wanna flash recovery after u get a custom recovery on board
I'm using cm 12.1. The nighlies are good enough for a daily driver and I love it compared to touchwiz
Sent from my SM-G900T using Tapatalk
muniz_ri said:
I have a stock rooted ROM here and am working on a deodexed version but I see no benefit/need for creating an Odin version:
http://forum.xda-developers.com/tmo...l/how-to-update-to-g900tof6-5-1-1-pc-t3141404
Click to expand...
Click to collapse
The ROM for 5.1.1 isn't flashable through FlashFire to keep root and Knox 0x0 right?
TheAH said:
The ROM for 5.1.1 isn't flashable through FlashFire to keep root and Knox 0x0 right?
Click to expand...
Click to collapse
Correct, you need a custom kernel to root 5.1 which trips the warranty bit any way you flash it.