hi guys.i'm stucked on something by 2 days.and i just can't resolve this.i want to put android 4.3 on my Wave 2 S8530,and it's just impossible.i saw that it's working well,without lag,and i want it.i read all the instructions,on every thread,but my phone just don't want to accept it,lol. i did some steps,and i had to wait for about 20 minutes(not kidding) to boot up.and then,to enter in the menu,i had to wait another 5 minutes.and then,restarts,and so on to the end. i did something wrong maybe.if someone could say me what i have to do,i would be grateful.i saw videos on youtube,i did same,but nothing. when i have to mount usb storage in recovery mod,after copying the clockworkmod folder,the sd card unmount by itself.and so,just some files are transfered to card.problem with usb i don't have.maybe the card is the problem.i tried with card reader,and as i told you,i have to wait a long,long time to boot up.altough after that long boot up worked well,was something.but no,is not working.please help me.and if like wasn't enough,all these files are shared with multiupload.and this site didn't work anymore.if you could give me another site from where to download the files i need,i would be.again,grateful.PLEASE!!
userX.x said:
hi guys.i'm stucked on something by 2 days.and i just can't resolve this.i want to put android 4.3 on my Wave 2 S8530,and it's just impossible.i saw that it's working well,without lag,and i want it.i read all the instructions,on every thread,but my phone just don't want to accept it,lol. i did some steps,and i had to wait for about 20 minutes(not kidding) to boot up.and then,to enter in the menu,i had to wait another 5 minutes.and then,restarts,and so on to the end. i did something wrong maybe.if someone could say me what i have to do,i would be grateful.i saw videos on youtube,i did same,but nothing. when i have to mount usb storage in recovery mod,after copying the clockworkmod folder,the sd card unmount by itself.and so,just some files are transfered to card.problem with usb i don't have.maybe the card is the problem.i tried with card reader,and as i told you,i have to wait a long,long time to boot up.altough after that long boot up worked well,was something.but no,is not working.please help me.and if like wasn't enough,all these files are shared with multiupload.and this site didn't work anymore.if you could give me another site from where to download the files i need,i would be.again,grateful.PLEASE!!
Click to expand...
Click to collapse
First, make sure to have rom zip (badadroid v4.x) on SDcard OR on bada user partition and the good zImage (the zImage given with the rom, inside the zip) on bada user partition. If this is done, flash FOTA and Bootfiles (for s8530, not s8500) from Badadroid thread. once done, you should be able to access recovery mode. From recovery mode, you just have to choose "flash zip/flash zip from sdcard0 or sdcard1 (if you choose bada user partition fo ROM zip), wait the flashing to be done, and reboot holding call. Android should boot.
(I assumed you tried to flash badadroid, and not another rom, instructions may differ)
BenzoX said:
First, make sure to have rom zip (badadroid v4.x) on SDcard OR on bada user partition and the good zImage (the zImage given with the rom, inside the zip) on bada user partition. If this is done, flash FOTA and Bootfiles (for s8530, not s8500) from Badadroid thread. once done, you should be able to access recovery mode. From recovery mode, you just have to choose "flash zip/flash zip from sdcard0 or sdcard1 (if you choose bada user partition fo ROM zip), wait the flashing to be done, and reboot holding call. Android should boot.
(I assumed you tried to flash badadroid, and not another rom, instructions may differ)
Click to expand...
Click to collapse
I want to install ULTRA B.U.X 3. that´s the rom i want
i would download from here http://forum.xda-developers.com/showthread.php?t=2609560 but the multiupload site don´t work anymore
userX.x said:
i would download from here http://forum.xda-developers.com/showthread.php?t=2609560 but the multiupload site don´t work anymore
Click to expand...
Click to collapse
BUX is good but outdated, and i don't know if there is any working links...
Try Badadroid
Come here if you need help : http://widget00.mibbit.com/?setting...5d0c&server=irc.Mibbit.Net&channel=#zendrokat
Say my pseudo if you want me to notice.
BenzoX said:
BUX is good but outdated, and i don't know if there is any working links...
Try Badadroid
Come here if you need help : http://widget00.mibbit.com/?setting...5d0c&server=irc.Mibbit.Net&channel=#zendrokat
Say my pseudo if you want me to notice.
Click to expand...
Click to collapse
sorry that i ask,but is badadroid better than BUX? i reefer as performance,gaming,and so on
userX.x said:
sorry that i ask,but is badadroid better than BUX? i reefer as performance,gaming,and so on
Click to expand...
Click to collapse
BUX is old and not allowed on XDA, but it offer good perf.
Badadroid is stable and run good but can't handle lot of apps in background (such as Gapps).
BenzoX said:
BUX is old and not allowed on XDA, but it offer good perf.
Badadroid is stable and run good but can't handle lot of apps in background (such as Gapps).
Click to expand...
Click to collapse
one more thing i ask.if i´m going for zendrokat,for example,can i play hd games as i would have played on BUX? and without lag?
userX.x said:
one more thing i ask.if i´m going for zendrokat,for example,can i play hd games as i would have played on BUX? and without lag?
Click to expand...
Click to collapse
Best for games is either BUX, Zendrokat on ICZen, depending on the game, not Badadroid (even if all these are based on Badadroid team work.)
BenzoX said:
Best for games is either BUX, Zendrokat on ICZen, depending on the game, not Badadroid (even if all these are based on Badadroid team work.)
Click to expand...
Click to collapse
i dunno man,i searched untill now all types of BUX and Zendrokat,and i didn't found anything.all links are closed,like zendrokat.com or megaupload.com. i'll just give up,i didn't went outside for 3 days,just to make my phone running better.but nothing. anyway,thanks for replying!
userX.x said:
i dunno man,i searched untill now all types of BUX and Zendrokat,and i didn't found anything.all links are closed,like zendrokat.com or megaupload.com. i'll just give up,i didn't went outside for 3 days,just to make my phone running better.but nothing. anyway,thanks for replying!
Click to expand...
Click to collapse
These roms are not allowed here, go to badania.de (german website) if you have more question., You'll find some files here
BenzoX said:
These roms are not allowed here, go to badania.de (german website) if you have more question., You'll find some files here
Click to expand...
Click to collapse
tnx brah!you da real mvp! after 3 days of searching,i finally found something good.i use android 4.4 and it´s super!hell yeah:good:
Related
New version 0.7 available!
Now compatible with software version 1.1 !!
Special thanks to Decad3nce for the new framework.jar!
Click to expand...
Click to collapse
Howdy everyone! It's thecubed / IOMonster again!
This time, I'm back with a MONSTER release
For all those asking "What's a Monster RootPack"? It's simple!
It's a SD card image containing a bootable Clockwork Recovery 3.0.0.5 and a set of .zip files that allow you to root your device and install Google Apps (market, gmail, youtube, etc).
All you have to do is read the instructions-- it explains the rest.
Please be sure to read ALL the instructions first before using this utility!
All the instructions can be found here: http://legacyschool.us.to/nookdev/clockwork/rootpack-instructions.html
Be sure to read through them!
Click to expand...
Click to collapse
I'm not one for huge forum posts, so keeping all the instructions on one URL helps me stay organized
Downloads:
Download the RootPack here: http://legacyschool.us.to/nookdev/clockwork/0.7/128mb_rootpack-0.7.tar.gz [mirror]
Or
Download a bootable Clockwork SD card (128mb, 1gb, 2gb, 4gb, 8gb) here:
http://legacyschool.us.to/nookdev/clockwork/0.7/ [mirrors]
Click to expand...
Click to collapse
Updated Zip Files:
Use these if you already have a bootable SD, or even CWM installed on your device:
http://legacyschool.us.to/nookdev/clockwork/0.7/zips
Click to expand...
Click to collapse
Want to build your own CWM SD cards?
Download this: http://legacyschool.us.to/nookdev/clockwork/0.7/buildenv-0.7.tar.gz
It's a complete build environment for making bootable SD cards. Included are the source files for 128mb, 1gb, 2gb, 4gb, and 8gb SD cards.
Click to expand...
Click to collapse
Updates:
Version 0.7
New build environment!
New CWR sizes, rootpack reduced to 128mb image. (We now have 128mb, 1gb, 2gb, 4gb, and 8gb images!)
1.1 Rooting and Google Apps support! (thanks D3cad3nc3!)
FIXED: backup/restore from CWM now works correctly!
Version 0.5
Well, packages.xml is in /data/system, not /system .. oops.
Release of 128mb bootable Clockwork SD card also
Adds block-1.1.zip and unblock-1.1.zip to block the updates the easy way!
Version 0.4r2
Bugfixes. Lots of 'em.
Version 0.4
Fix root.zip and googleapps.zip permissions problems (/data/app and /system/app DO have different owners and permissions)
Bootable CWM base: No change; version bumped to 0.4 just because.
Version 0.3
Update to most recent Clockwork Recovery 3.0.0.5 build (should have working backup/restore, and defaults to ext2/ext3 support instead of ext4)
Fixes root.zip and googleapps.zip bugs (can't believe I forgot a semicolon!)
Updates installclockwork.zip to latest Clockwork Recovery build supporting ext2/3
Version 0.2
Initial public beta release
Click to expand...
Click to collapse
This brings me to my final point: this rootpack has been tested on my device, but I'm sure there are still bugs! If you want a time-tested method for rooting your device, stick with AutoNooter for the time being.
BUT! I really need testers! If you'd like to test this, please let me know.
Questions/comments welcome!
woot! thanks iomonster! this will make my tinkering much easier, mwahahahaha!
CWR works beautifully booting from SDCard, you sir are the man of the hour I shall email you two internets!
However, I do not see the zip files you refer too (Does not really matter that much as by itself its amazing!)
modembug said:
CWR works beautifully booting from SDCard, you sir are the man of the hour I shall email you two internets!
Click to expand...
Click to collapse
The real credits go to the awesome dudes of ClockworkMod, nemith on IRC, FatTire on IRC, [mbm] on IRC, and a LONG list of other people that I am soon to credit with a rather large section in my instructions
Glad it helps!
EDIT: The zips are only in the rootpack_1gb.tar.gz -- they're actually in the sd image. Clockwork_1gb.tar.gz is just a bootable clockwork, for the people who just want a platform without any additions (and a speedy download! the rootpack is 24mb, whereas the clockwork card is only 8mb)
yeah, ive been too preoccupied with work to hop on IRC lately , i need to get my butt back in there... this weekend for sure.
modembug said:
yeah, ive been too preoccupied with work to hop on IRC lately , i need to get my butt back in there... this weekend for sure.
Click to expand...
Click to collapse
No worries...
There's quite a bit going on on IRC... it's where all the cool people hang out
ya i know... i fail! i was there for all the initial excitement and frustration haha
something is up with the img file for the rootpack, it claims not enough space on my 2gb card and my 16gb card... cwr only img seems to be fine.. just a heads up
I take it back.... my work laptop is just a POS, my thinkpad does it just fine! whatever.... so much for Dell!
modembug said:
something is up with the img file for the rootpack, it claims not enough space on my 2gb card and my 16gb card... cwr only img seems to be fine.. just a heads up
Click to expand...
Click to collapse
How big did it decompress to be? It should only be around 900MB... unless I accidentally compressed it wrong somehow...
Seems to decompress fine for me.. 941-ish MB.. should fit just fine on any SD 1GB or larger...
What If You're Already Rooted..
Can this be done or (groans mightily) do we have to revert all the way back to stock?
Ok, I followed the directions exactly, and the device went into a boot loop. It installed the Root, then tried to install the googleapps.zip and received an error 6. Tried rebooting and running the googleapps.zip again, same error.
Ultimately, I used the AutoNooter process and it worked perfectly.
naplesbill said:
Ok, I followed the directions exactly, and the device went into a boot loop. It installed the Root, then tried to install the googleapps.zip and received an error 6. Tried rebooting and running the googleapps.zip again, same error.
Ultimately, I used the AutoNooter process and it worked perfectly.
Click to expand...
Click to collapse
Thank you for your feedback! I'll be sure to check out why the device was bootlooping.
As for the error 6, that'll be interesting to track down.. it's probably a missing semicolon somewhere haha.
One question-- when it was bootlooping, did you see the new boot animation? or did it just go to the "touch the future of reading" to the "n" screen and over and over again?
Well this is embarrassing! I forgot to include the modified ramdisk in the root.zip... your device started bootlooping because I renamed the ramdisk, but forgot to copy the new one in place! Gah! Oops!
This, sir, is amazing!!!!
Sent from my rooted droid x
thecubed said:
Well this is embarrassing! I forgot to include the modified ramdisk in the root.zip... your device started bootlooping because I renamed the ramdisk, but forgot to copy the new one in place! Gah! Oops!
Click to expand...
Click to collapse
Well, at least that issue was easy to trace. How about the error 6 with the googleapps.zip?
naplesbill said:
Well, at least that issue was easy to trace. How about the error 6 with the googleapps.zip?
Click to expand...
Click to collapse
Probably a missing semicolon somewhere... I'm not at my desktop at the moment though, I'll post back with an update soon, and replacement .zips just incase you don't want to reburn the SD card. (you can just drag+drop 'em to the SD card once you have it made)
Version 0.3 is now out! Give it a spin and let me know what you think!
thecubed said:
Version 0.3 is now out! Give it a spin and let me know what you think!
Click to expand...
Click to collapse
Getting a 404 error - URL not found!
i had tried the latest one, but i still stack at rebooting,
on my screen, i only see half "N" of the "nook", than no other further,
what can i do now? please.... don't know what to do now....
chienter said:
i had tried the latest one, but i still stack at rebooting,
on my screen, i only see half "N" of the "nook", than no other further,
what can i do now? please.... don't know what to do now....
Click to expand...
Click to collapse
used "8 interrupted Boots" for recovered to the original status,
i guess this time will be the "BIGGEST" lesson i had learned
READ FIRST
Hey,
Welcome to this tut. It's been active for a few months now but there are some things many users and the dev's want to tell you.
1. DO NOT ask questions about when things are finished.
2. Before you ask an question use the SEARCH THIS THREAD button
3. Post tut related questions in THIS THREAD, so do NOT POST QUESTIONS IN THE DEV THREAD
4. Use the THANKS button when you get your answer.
5. Don't ask questions like "I've done everything but it doesnt work" we really can't help you with such a question cause we don't know where what goes wrong..
If your post is violating one of these "thread rules" (don't call then real rules...) then we'll just report your post. getting it deleted.. etc. etc..
For our "Wise" users here (i mean the ones who actually READ before they post) Don't go flame on users asking stupid questions just leave them allone and REPORT the post
Thanks & Enjoy.
ShadowAS1
Okay, to be clear. All this work is COPYRIGHTED By the devs, The TUT is copyrighted by me, so stop frigging CopyPastaing my tut.. . With other words.. ASK PERMISSION TO DO SO, Thanks[/B]
New in this update:
Added new FOTA
Disclaimer:
This stuff is still experimental, me, nor the devs will be responsible for any damage done to you, your phone or whatsoever, so USE AT OWN RISK
Warning:
Do NOT flash when you don't know what you're doing. It could BRICK your phone. And I will NOT support it when you screw up your phone.
FAQ
Q: It doesn't work I've done everything but it doesnt work
A: Do you even think we CAN answer the question if you ask it like that?
Q: My phone shuts down after 2 minutes, why?
A: It's an idle bug.. We're still looking for a solution
Q: When will GB be released, When will the modem drivers be finished.. etc..
A: WE DON'T KNOW! STOP ASKING THIS
What WORKS in this build
WiFi (+dhcp)
Market
3D Games (some maybe not)
Launchers (tested TWLauncher, Zeam, LauncherPRO)
Audio (FULL Working now)
Video's (see my livestream.com example)
What does NOT work in this build
Modem (3G, Calls, ETC) (works partially on oleg's build we're still working on it)
Idle time (also known as the shutdown bug)
Sensors (Causes battery bug)
Supported BOOTLOADERS
S8500DDJE7_MAY
S8500JVKC1_MAR
S8500XXJD9_APR
S8500XXJEE_MAY
S8500XXJEF_JUN
S8500XXJF1_JUN
S8500XXJF4_JUL
S8500XXJH2_DEC
S8500XXJH2_NOV
S8500XXJH3_AUG
S8500XXJI3_FEB
S8500XXJI3_NOV
S8500XXJID_SEP
S8500XXJK2_MAY
S8500XXJL2_APR
S8500XXJL2_DEC
S8500XXJL2_MAR
What do we need?
Multiloader: MegaUpload
zImage & stuff: MegaUpload
EXT2 IMG Filesystem: Part1 Part2
FOTA: MegaUpload (Restored old one)
Ok before we start. The tutorial is now 100% Rewritten. But you still need to read carefully
Notice
Clean out your ENTIRE bada storage first cause we will need almost everything of it
Notice2: This project is still in ALPHA Stage. So don't expect a fully awesome working version yet.
In this version all KNOWN fixes are implented except for root
1. Download all the needed files, when you've done so extract the ZIP with the zImage stuff in it and place it in you bada storage root. (you can extract the .001 with 7-zip)
(i made the Images URLS's because they're to big)
1b. Connect your phone and put it in Mass Storage mode
You should copy your files like the Images below
Bada Storage root:
http://ShadowAS1.com/badadroid/storageroot1.png
This should be inside your storage root:
http://ShadowAS1.com/badadroid/storageroot2.png
This should be inside your galaxyboot folder:
http://ShadowAS1.com/badadroid/storageroot3.png
So inside the sorage root should be your galaxyboot folder and the makext2img.sh
inside the galaxyboot folder should be zImage, SBL.bin and the .IMG file
2.Then you should shut down your phone and boot it in download mode:
Vol Down+Camera+Power and you will see DOWNLOAD MODE on the screen
3.Open up multiloader and take over my config here:
http://shadowas1.com/badadroid/multiloader.png
When you click port search the name "LISMORE" should/can popup next to the right COM port
Now click download and wait for it to finish
Okay, now your phone is ready for the first android run
Boot it by holding power+menu+vol up: (see image)
http://shadowas1.com/badadroid/IMG_0052.JPG
Then this should popup (after the SGS screen)
DO NEVER, ABSOLUTELY NEVER PULL OUT BATTERY OR TOUCH THE PHONE IN THIS PROCESS
http://shadowas1.com/badadroid/IMG_0050.JPG
This can take up to 5 minutes.
Now, Two things can happen
1. The phone boots bada
2. The phone shuts down
In any of this cases your phone is absolutely fine. If you have case 2 you can boot bada to check if everythings alright if you wish.
Assuming we all boot bada shut down the phone again
Boot android in the normal way by holding the Power and Call key
=====Removing Android from your bada partitions======
On request i add this one, In order to remove all android stuff put the "mkext2images-remove.sh" in your bada storage root and boot recovery mode again
Goodluck, ShadowAS1
Good Luck,
ShadowAS1
_________________
Changelog:
12-7(2): Added new FOTA
12-7: Added what (doesn't) work(s) list
10-7: Updated some stuff (FW list)
Thanks a lot!!
Great Guide!
But!
If some of you are having problems installing VMware due to processor requirements, we can still use the Ubuntu live CD and use gparted disk utility..
Also, we can also use a live CD version of gparted.. just search it at Google..
Wonderful guide to read, testing it now. Will post my results if i manage it (or not )
Regards
So can i use other apks than that specified above..?
prok**** said:
So can i use other apks than that specified above..?
Click to expand...
Click to collapse
The APKs listed above are ment to avoid crashing
you can use al programs listed in the phone i can not guarantee that it will work completely this is still pre-alpha
Nice guide...thank you
Hi!
I have followed all the steps.
Now I'm in the First-time Run section and when I start Android (end call and then start call buttons) the screen flashes, then the Galaxy S screen appears. After 6-7 seconds, blank screen and... Samsung Wave and Bada screens with bada startup!
I saw other member in other post having the same issue, but he had still no answer.
Any idea?
Yeap, still same problem as mcmollo after following this guide as well ...
Works for me
Thanks
ShadowAS1 said:
The APKs listed above are ment to avoid crashing
you can use al programs listed in the phone i can not guarantee that it will work completely this is still pre-alpha
Click to expand...
Click to collapse
i see .. well if i try i ll let u guys know.. .. thank u for ur support.. still waiting for ubuntu..
Same here
You guys are on xxjl2 firmware right?
kadavil said:
You guys are on xxjl2 firmware right?
Click to expand...
Click to collapse
Yeah, as stated in your and in Shadow's guide.
Yeap, same here: XXJL2 provided in the tutorials.
I have a SanDisk 2GB class 4 microSD card and created a FAT16 primary partition (1GB) and a EXT2 primary partition (1GB).
kadavil said:
You guys are on xxjl2 firmware right?
Click to expand...
Click to collapse
Yes. I repeated the tutorial 3 times, taking care of doing it exactly as you say. But Bada still loading after Galaxy screen.
Maybe compatibility problem with the SD card?.
Mine is KINGSTON MICRO SD HC 8GB CLASS 4
I created a FAT16 primary partition (4GB) and then the EXT2 partition (4GB).
Will we install waveII (s8530) ?
SORRY SORRY I forgot something important. Read the tuto again. you'll notice the edit (because there's abig fat "EDIT" in front of it) This may fix the problems
can i use ubuntu 10.04?
ShadowAS1 said:
SORRY SORRY I forgot something important. Read the tuto again. you'll notice the edit (because there's abig fat "EDIT" in front of it) This may fix the problems
Click to expand...
Click to collapse
thanks, i hope, we ll use stable android on 8530...
So I have tried everything getting this thing (Nook 16GB Tablet) to work (boot off SD [class 4 8gb Sandisk] card into CM10.X+)
I have followed the directions to a T (several several times) and everytime I turn on my Nook it goes to the cyanoboot screen and goes to (SDC) LOADING BOOT and is stuck there, or if I hold the N before it get to it it will allow me to choose my boot option (I've tried the SDC recovery to use automatic partition zip provided on iamafanof's wordpress site; please note I have tried it with manually partitioning, and just leaving image as is and same results).
I have did a complete factory restore via the repart.img method, tried different SDC image versions, bought a new SD card just to make sure it wasn't the card.
The weird thing is I can create a CM7 SD card and it loads fine (so I don't think its the SD Card).
I am at witts end with this; I work in technology as a career (on a bit diff side) and this thing is driving me nuts not working.
I have tried booting tethered as well; the only thing that may be different is that I bought this used and it has an aftermarked (Griffin) charger.
What really sucks was I was originally thought I bought a NC b/c I heard it was easier to create a bootable SDC and found out I had a microphone
Can someone recommend a next approach? The only other thing I could think of was to try the alt boot files on "iamafanof" wordpress site but the links are dead.
I don't care if its 10.1 or 10; just really interested in Android 4.0 period.
Also this Nook was 1.4.3 when I first tried to boot from SD; since then I went through process above and now is 1.4.0 factory reset.
I have looked through the forums EVERYWHERE and I decided to join here to get help - thanks in advance!
I hdon't know why this happens, but just to be clear, have you tried Iamafanof's ready-made CM10 bootbale sd? http://iamafanof.wordpress.com/2012/11/18/cm10-0-jellybean-sdcard-img-for-nook-tablet/
If you decide to install CM10 internally this image can be used as a bootable CWM card even if you don't want to run CM10 from it.
And FWIW, why does it suck that you got a Tablet instead of a NC? The Tablet is so much better, and certainly not any harder to mod.
asawi said:
I hdon't know why this happens, but just to be clear, have you tried Iamafanof's ready-made CM10 bootbale sd? Removed link per 10 post policy
If you decide to install CM10 internally this image can be used as a bootable CWM card even if you don't want to run CM10 from it.
And FWIW, why does it suck that you got a Tablet instead of a NC? The Tablet is so much better, and certainly not any harder to mod.
Click to expand...
Click to collapse
Well guess it doesn't suck considering I payed 50 for a better tablet, I am just annoyed with it at this point. Yes I did, I formatted a SDC and burned that image to it after unzipping ( cm-10-20121231-NOOKTABLET-acclaim-HD-SDC-img.rar ) as well as other versions and they don't work even if I don't mess with partition tables. My only guess is that the boot files in the boot 1st partition of the image aren't compatible with my device which could be explained since I'm sure mine is a late model ( but why does CW7 work ? )
At this point I wonder if its possible to use the CW7 SDC and just copy gapps and the 10.1 Rom over. I'm extremely new at this so hopefully that isn't a stupid idea.
I do want to stay away from rooting internal for various reasons.
Any ideas ?
xXErebuS said:
So I have tried everything getting this thing (Nook 16GB Tablet) to work (boot off SD [class 4 8gb Sandisk] card into CM10.X+)
I have followed the directions to a T (several several times) and everytime I turn on my Nook it goes to the cyanoboot screen and goes to (SDC) LOADING BOOT and is stuck there,
...
I have looked through the forums EVERYWHERE and I decided to join here to get help - thanks in advance!
Click to expand...
Click to collapse
Which direction and which ROM zip file did you try to use?
xXErebuS said:
...
Yes I did, I formatted a SDC and burned that image to it after unzipping ( cm-10-20121231-NOOKTABLET-acclaim-HD-SDC-img.rar ) as well as other versions and they don't work even if I don't mess with partition tables. My only guess is that the boot files in the boot 1st partition of the image aren't compatible with my device which could be explained since I'm sure mine is a late model ( but why does CW7 work ? )
At this point I wonder if its possible to use the CW7 SDC and just copy gapps and the 10.1 Rom over. I'm extremely new at this so hopefully that isn't a stupid idea.
I do want to stay away from rooting internal for various reasons.
Any ideas ?
Click to expand...
Click to collapse
I'd suggest you try flashing flash_kernel_acclaim_30MAR2013_HD_SDC.zip at http://iamafanof.wordpress.com/2013/02/18/cm10-1-jellybean-android-4-2-2-for-nook-tablet-0218/ (under heading "Flash this if your NT doesn’t boot newer kernel" in SDC section).
digixmax said:
I'd suggest you try flashing flash_kernel_acclaim_30MAR2013_HD_SDC.zip at [(under heading "Flash this if your NT doesn’t boot newer kernel" in SDC section).
Click to expand...
Click to collapse
That's for if your doing the internal root though right ? I don't want to do that. I listed above one of the exact zip files I tried, I've tried several of them ( the pre done SDC images). And none of them will boot past cynogenmod .
xXErebuS said:
That's for if your doing the internal root though right ? I don't want to do that. I listed above one of the exact zip files I tried, I've tried several of them ( the pre done SDC images). And none of them will boot past cynogenmod .
Click to expand...
Click to collapse
The version of the kernel fix that I referenced is for SD-based ROM (the file name contains the "SDC" string).
Sent from my Barnes & Noble Nook HD+ using XDA Premium HD app
digixmax said:
The version of the kernel fix that I referenced is for SD-based ROM (the file name contains the "SDC" string).
Sent from my Barnes & Noble Nook HD+ using XDA Premium HD app
Click to expand...
Click to collapse
Ok I now see it (flash_kernel_acclaim_30MAR2013_HD_SDC.zip) but how do I flash it if I can't boot into SDC Recovery from the Cynogenmod screen? Does it modify internal ROM - can I put it on a blank SD Card or on the CM7 and go into recovery?
Sorry if this is a noob question.
Well I've now tried it manually > forum.xda-developers.com/showthread.php?t=2098419
and I get stuck at the same place (booting into SDC Recovery in steps).
I have ruled out it being the SD card (unless I some how managed to get two bad ones that still boot into CM7).
xXErebuS said:
Well I've now tried it manually > forum.xda-developers.com/showthread.php?t=2098419
and I get stuck at the same place (booting into SDC Recovery in steps).
I have ruled out it being the SD card (unless I some how managed to get two bad ones that still boot into CM7).
Click to expand...
Click to collapse
Did you extract and copy to SD the two files boot.img and recovery.img as prescribed in step #6 of http://forum.xda-developers.com/showpost.php?p=36685310&postcount=1?
digixmax said:
Did you extract and copy to SD the two files boot.img and recovery.img as prescribed in step #6 of ]
Click to expand...
Click to collapse
Yes I did. I have another larger flash drive coming in the mail, I do not think its the flash drive though. No one else has ever had this issue? CM7 works fine, I may try to boot into CM9 later this weekend.
Just to clarify I have done manual method and burned image, they boot to the cynogenmod boot menu and if I pick SDC anything it just hangs there.
I almost want to say I don't think it's cynogenmod bc I can choose internal boot from it and it boots into nook fine
xXErebuS said:
I almost want to say I don't think it's cynogenmod bc I can choose internal boot from it and it boots into nook fine
Click to expand...
Click to collapse
This so odd! It seams like there is something wrong woth the boot section on your sd, but I don't see how that could be the problem if indeed you have tried ready-made images that we know work for "everyone else"!
Clutching at straws here, but have you tried Iamafanof's readymade CM10.1 image as well? http://iamafanof.wordpress.com/2013...-1-jellybean-sdcard-img-for-nook-tablet-0110/ (I'm guessing you have, but like I said, clutching at straws...)
xXErebuS said:
Yes I did. I have another larger flash drive coming in the mail, I do not think its the flash drive though. No one else has ever had this issue? CM7 works fine, I may try to boot into CM9 later this weekend.
Just to clarify I have done manual method and burned image, they boot to the cynogenmod boot menu and if I pick SDC anything it just hangs there.
I almost want to say I don't think it's cynogenmod bc I can choose internal boot from it and it boots into nook fine
Click to expand...
Click to collapse
If you pick SDC Recovery from Cyanoboot menu it should say "loading SDC recovery" but it will take some time (up to between 1-2 min) before the CWM menu appears. Same thing with SDC Boot: it will take a bit of time before you see its boot animation. But neither should not take more than a couple of minutes to appear.
Also, for the manual method I'd suggest checking to make sure that boot.img and recovery.img on the SDcard /boot partition are not corrupted in the process of copying them to SDcard.
asawi said:
This so odd! It seams like there is something wrong woth the boot section on your sd, but I don't see how that could be the problem if indeed you have tried ready-made images that we know work for "everyone else"!
Clutching at straws here, but have you tried Iamafanof's readymade CM10.1 image as well? http://iamafanof.wordpress.com/2013...-1-jellybean-sdcard-img-for-nook-tablet-0110/ (I'm guessing you have, but like I said, clutching at straws...)
Click to expand...
Click to collapse
I am about 95% sure I have; I will try it again just to make sure; I tried several different versions of the image for 10.0 and 10.1 as well as the manual methods for both thinking it may be the build.
I will try to boot CM9.X and see if it works since 7 works. Really strange that no one else seems to have the issue.
In addition, I have left it well over 1-2 minutes at the cynogenmod screen and it never boots into CWM or the image (depending on boot option I pick).
So quick update.
I tried building a CM9 card and I got Cynogenmod to boot into SDC recovery (maybe I can use the same boot.img file?) However when trying to boot into SDC (after installing gapps.zip / ROM.zip) it reboots and boots into the normal INT nook.
Granite I may have messed something up with the process since I only did it once; but atleast I got past Cynogenmod screen.
Followed these directions and used these files:
http://iamafanof.wordpress.com/2012/11/11/how-to-guide-bootable-cm7cm9cm10-sdcard-for-nook-tablet/
ive had similar issues , one thing that hit me was that my downloads were incomplete . when you download the images of cm 10.X verify the file size vs the download page stated size and make sure that your downloads are complete. also i would try re downloading them all over again thats what i had to do , and follow the instructions to the dot but give us a link so we can see which ones your reading too , ive learned alot in the past three weeks of non stop hacking and modding on my tablet, its bricked itself three times so far and ive been forced to un brick it ,
the reason why i said that is , sometimes i get so worked up and over whelmed, take a five minuet break and go to the fridge and grab a drink and dont think about this for five minuets , clear your head and calm down then look back at the work you have already completed and examine it step by step fresh , you prob just missed one little detail ,
"it reboots and boots into the normal INT nook. "
if upon reboot it goes to nook , hold power button until its off , then hit power to turn it on , once N shows up hit the N button on the tablet if you have CWM installed to internal , this is like a short cut key to force it to boot to sdc , OR with tablet completely powered off plug in charger cable , it should turn tablet on ,and with cable inserted it should boot to sd card first , if it takes a while then goes to nook OS your sd card is incorrect ,
checked your link this isnt the one i used , i used this link
http://forum.xda-developers.com/showthread.php?t=2056626 yes its for 10.0 but once its installed internally you can connect to wifi and update to 10.1.2 4.2.2 in software on device , just remember to get the right Gapps before hand
forwarning , dont play with the touch screen firmware editor without reading , if you do pm me ill tell you how i crash coursed through that and how to fix it once you break that too lols 10 point is nice though
SD card version works nice too
http://forum.xda-developers.com/showthread.php?t=2098419
Hello,
First of all, if I seem to be rude or impolite, it's just because of my bad english, I apologize in advance...
I have bought a nook tablet 8G, cyanogenmod (android 4.3.1), as it uses to bootloop very often (and as it needs a simple wipe of data but a re-installation of the apk) every 4 or 5 boots, I thought it would be a great idea to re install a new cyanogen...I thought it would be as easy as on my samsung galaxy
But now, the only thing that it does is to reboot on recovery mode...When I try to power it on, it starts just like if it is ok, then it boots on TWRP mode (my CWM on galaxy seems to be more friendly). I have tried again to reinstall my rom, but it is said that it is "unable to mount data1".
I have also done a wipe dalvik cache but I prefer to stop and ask for further information before I do serious damages
I have also tried to install "flashable fix bootloop" but no way
Thank you very much !
Have you tried re-installing using SD-based CWM (e.g., see http://forum.xda-developers.com/showpost.php?p=51377882&postcount=163 or http://forum.xda-developers.com/showpost.php?p=50828000&postcount=1)?
Hello Digixmax,
Thank you very much for your answer.
Before asking, I have searched and I saw this post http://forum.xda-developers.com/showthread.php?t=2692403, and I am very happy to have the opportunity to be helped by the one who posted it !
I haven't tried it because there are some parts that I don't understand very well but now I'm gonna try :fingers-crossed:
- I have a 32g sd card that I would like to use for my apk, shall I use it to install CM11 or shall I buy a new one ? Will a 2G sd card be sufficient ?
- What does "set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag" mean ? To set = let it free ? "Set its Active flag", I have no idea of what it means, will I understand by doing the manipulation ?
- For the second part, I have to download next u-boot.bin and flashing_boot.img in boot.zip from https://www.mediafire.com/folder/xjwc1a482a6ll/Nook_Tablet but I don't know wich one to choose.
What does MLO means ?
For the other points, I think it will be ok.
Oh...Is it necessary to intall CM10 before upgrading to CM11 ?
Thank you very much Digixmax, I am sorry to bother you with such stupid questions
Sarah B. said:
...
I have a 32g sd card that I would like to use for my apk, shall I use it to install CM11 or shall I buy a new one ?
Click to expand...
Click to collapse
You can just use existing card.
Will a 2G sd card be sufficient ?
Click to expand...
Click to collapse
It should be sufficient for installing CM.
- What does "set the partition ID type for the partition to 0x0C FAT32 LBA and set its Active flag" mean ? To set = let it free ? "Set its Active flag", I have no idea of what it means, will I understand by doing the manipulation ?
Click to expand...
Click to collapse
You should see menu for partition type/flag settings when you're in a disk partition tool.
- For the second part, I have to download next u-boot.bin and flashing_boot.img in boot.zip from https://www.mediafire.com/folder/xjwc1a482a6ll/Nook_Tablet but I don't know wich one to choose.
What does MLO means ?
Click to expand...
Click to collapse
MLO is one of 3 the files you need, they are contained in the zip file succulent_boot.zip
...
Is it necessary to install CM10 before upgrading to CM11 ?
Click to expand...
Click to collapse
No. See http://forum.xda-developers.com/showthread.php?t=2692403 for pointers/tips on installing CM11.
Thanks a lot, Digixmax, I'm gonna do this tomorrow (I've to go to work now).
I will tell you what the situation is as soon as I finish.
Sarah B. said:
Thanks a lot, Digixmax, I'm gonna do this tomorrow (I've to go to work now).
I will tell you what the situation is as soon as I finish.
Click to expand...
Click to collapse
Since your NT is already on CM, you might want to try first the method to update from an older CM version to CM11 outlined at http://forum.xda-developers.com/showthread.php?t=2670589.
digixmax said:
Since your NT is already on CM, you might want to try first the method to update from an older CM version to CM11 outlined at http://forum.xda-developers.com/showthread.php?t=2670589.
Click to expand...
Click to collapse
:victory: :victory: :victory:
Thank you very very very very very much :highfive:
Hi all,
to make it plain and short: I messed up.
I have a GT-S5830i which I unrooted according to the Sticky Note in the forum, installed CWM Recovery and then 'installed from ZIP' a CM9_cooperve_Beta_05.zip that I found in one of the posts in the forum. The installation went on without error message but since then the phone does not make it beyond the initial screen "Samsung Galaxy Ace GT-S5830i". I can start recovery mode and Download mode. In reovery mode I can format cache, data, sdcard, sd-ext but *not* system. Error Message: "E: format_volume: make_ext4fs failed on /dev/block/st19"
I have tried already several methods according to the forum, e.g.
1) 'install from ZIP' older Cyanogenmod
2) the tool ext4_formatter.zip
3) re-flash with ODIN with several tar-ROMs, all failed. Odin finds the phone (since I start Odin as Admin now), but after I hit 'start' it tries to establish a connection to the phone and ends after a while with 'Failed'
I'm basically lost now, don't know what else to do. Any advise is appreciated (it's my mom's phone, she is getting impatient )
Thx, cheers!
Xala
Hi @xalarsk , So you can't format your /system partition , which is required for installation of your rom ,, you need to try this method from here mate . Follow my instruction from the line @post#4 :"1. Download one of the newest ,,," to the end of the post and please do not use CM9 beta , because it is unstable and will wreak havoc with your system eventually . ( either cm7 or cm11 is the place you should go for CyanogenMod experience for cooperVe device ).
If you fail at any level please give us your logcat ( error massage ) for better support for your Odin process you mentioned .
Cygwin not working
Hi @ehsanotaku,
thank you for your quick reply, it's appreciated!
Unfortunately I couldn't get cygwin to install all necessary packets. The ZIP-test always failed. I have a Linux system running (Linux Mint 17) though, and hope that might help. In the meantime I tried to download the already split packages as described in another of your forum posts, but the website provides only exe-files instead of zip-files. Is there another location to download them?
#UPDATE: It seems there is a SplitFUS2 version for linux somewhere but couldn't find links to download. Anybody can help? I'll also PM Doky73
Cheers, Holger
xalarsk said:
Hi @ehsanotaku,
thank you for your quick reply, it's appreciated!
Unfortunately I couldn't get cygwin to install all necessary packets. The ZIP-test always failed. I have a Linux system running (Linux Mint 17) though, and hope that might help. In the meantime I tried to download the already split packages as described in another of your forum posts, but the website provides only exe-files instead of zip-files. Is there another location to download them?
#UPDATE: It seems there is a SplitFUS2 version for linux somewhere but couldn't find links to download. Anybody can help? I'll also PM Doky73
Cheers, Holger
Click to expand...
Click to collapse
Cygwin was meant for windows platform to get the native Linux environment/command line you already got there . You can create a virtual instance of the windows 7 inside virtualbox or any kind of apps you are preferring such as Vmware/Parallel etc etc to get the job done .
Splitfus2 only supports windows platform as far as i know mate,,, either vitalization as i said or the pre-made zip package ( which is clearly not .exe file ,, push the download now and get yourself a descent downland manager,, tested and zip packaged delivered ) from here is the feasible approach for your problem .
Ok, had all the files ready, just the Boot loader <DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.rar seems to be broken. I downloaded the link provided in your post #8 several times with several download managers, also uses 7-zip and several online unrar services..result always the same: The archive is broken. Is that possible? Would you mind to check yourself?
xalarsk said:
Ok, had all the files ready, just the Boot loader <DefaultCalDataWithBoot_S5830iXXLB1_REV00.tar.rar seems to be broken. I downloaded the link provided in your post #8 several times with several download managers, also uses 7-zip and several online unrar services..result always the same: The archive is broken. Is that possible? Would you mind to check yourself?
Click to expand...
Click to collapse
Another fellow had similar issue with my attachment that was corrected here @ post#27
Unbricked, SD card not recognized
Update: Phone has been unbricked, many thanks for that!
Currently I have still issues with the external SD card, which also holds the ZIP files. Phone won't recognize it, not even format it properly. Still working on that.
Cheers, Xala
xalarsk said:
Update: Phone has been unbricked, many thanks for that!
Currently I have still issues with the external SD card, which also holds the ZIP files. Phone won't recognize it, not even format it properly. Still working on that.
Cheers, Xala
Click to expand...
Click to collapse
Mostly this happened because of the bug inside CM9 beta you used . Study this topic mate i troubleshooted while ago for a sample of the symptoms external SD card would show after unstable ICS usage .
Also as an alternative to the method i instructed there , you can format/Re-partition your SD card by putting it inside card reader and using app such as free MiniTool Partition Wizard "Gparted" tool for Linux users Or "iPartiton" for Mac users etc etc ,, to get the job done . You can find several tutorials inside XDA for this matter mate.
Phone works with CM7.2, can I upgrade to CM9?
Hi again,
first of all, props to @ehsanotaku, I will hit the 'Thanks' buttons.
Now, this is a bit beyond the topic, but I'd like to ask anyway for recommendations of CM9 roms. The one I picked from a post inside this forum bricked my phone and made me start this thread, I don't want to go down this road again. So I'd be glad for any recommendation of a stable ROM that will put my phone beyond Android 4.0.
Cheers again,
Xala
So i have a similar issue. I used to have CM11 installed, but i figured thats too slow for me. Then i went back to stock rom (XXMJ2) which works fine. But now i have a problem.
Everytime i want to flash a stock based or cm7 based rom on my phone, it gets messed up. Today i wanted to flash this
http://forum.xda-developers.com/galaxy-ace/s5830i-develop/cm-7-2-kitkat-smart-r2-t3075267
i naturally downloaded clockwork mod recovery (5.0.2.6) and tried to flash it. Flashing was done pretty quickly (10 seconds or so) and when i rebooted, i obviously got stuck at sammy logo. Now booting back to the recovery (first e3 then cwm) i got bunch of error about partritions not being able to be mounted (happens the same if i want to manually mout them or format them)...
So, what to do ?
I have a suspicion, that flashing CM11 and the latest cwm recovery for it somehow messed up partritions.
hojnikb said:
So i have a similar issue. I used to have CM11 installed, but i figured thats too slow for me. Then i went back to stock rom (XXMJ2) which works fine. But now i have a problem.
Everytime i want to flash a stock based or cm7 based rom on my phone, it gets messed up. Today i wanted to flash this
http://forum.xda-developers.com/galaxy-ace/s5830i-develop/cm-7-2-kitkat-smart-r2-t3075267
i naturally downloaded clockwork mod recovery (5.0.2.6) and tried to flash it. Flashing was done pretty quickly (10 seconds or so) and when i rebooted, i obviously got stuck at sammy logo. Now booting back to the recovery (first e3 then cwm) i got bunch of error about partritions not being able to be mounted (happens the same if i want to manually mout them or format them)...
So, what to do ?
I have a suspicion, that flashing CM11 and the latest cwm recovery for it somehow messed up partritions.
Click to expand...
Click to collapse
ok not going to excruciating details of symptoms and explaining all of your errors for now just please read my advice @ post2 of this topic and follow the procedures accordingly and finished it with formatter tools and cm7 instructions you will find there ., after that you can install Kitkat Smart R2 like you are coming from another CM7 build instruction . btw some problem regarding super user privileges and play store 492-498 infamous bug was reported for this fairly new development .