[Q] (Q) 4.4.2 + Sence 6 RUU from AT&T HTC ONE? - AT&T HTC One (M7)

I can´t update my AT&T HTC ONE from OTA beacuse I am in Bolivia... can u help me with the Official RUU plx?!?

Oliverg11x said:
I can´t update my AT&T HTC ONE from OTA beacuse I am in Bolivia... can u help me with the Official RUU plx?!?
Click to expand...
Click to collapse
If you have S-OFF, you can flash the OTA package pulled by @clsA from stock recovery to get Sense 6.0. I believe there's no RUU yet for directly flashing Sense 6.0.

Oliverg11x said:
I can´t update my AT&T HTC ONE from OTA beacuse I am in Bolivia... can u help me with the Official RUU plx?!?
Click to expand...
Click to collapse
hafizimtiaz said:
If you have S-OFF, you can flash the OTA package pulled by @clsA from stock recovery to get Sense 6.0. I believe there's no RUU yet for directly flashing Sense 6.0.
Click to expand...
Click to collapse
I also posted a stock Nandroid of 5.12.502.2 here, Just restore it with TWRP
http://forum.xda-developers.com/showthread.php?t=2775650

hafizimtiaz said:
If you have S-OFF, you can flash the OTA package pulled by @clsA from stock recovery to get Sense 6.0. I believe there's no RUU yet for directly flashing Sense 6.0.
Click to expand...
Click to collapse
Hi all,
Can you (or anyone else) please offer some advice to my situation.
I currently have an AT&T HTC One running 4.3 stock Sense 5.0 (S-On and HBoot 1.55)
My end goal is to run 4.4.2 Sense 6.0 Stock (It has to be stock as I need my phone for work)
I live outside the USA and am using the phone unlocked so I don't have access to OTA from AT&T. Please what would be the best way to proceed?
- Should I download the 4.4.2 Sense 5.5 rom from here http://www.androidruu.com/index.php?developer=M7
and then get the Sense 6 OTA from http://forum.xda-developers.com/showthread.php?t=2659374 and flash with stock recovery or do I need s-off before I can do this.
Please any help would be appreciated and apologies for my newbie question

Related

[Q] Stock OTA Update 4.2.2 - How do I downgrade to 4.1.1 with Sense 4 +?

Stock OTA Update 4.2.2 - How do I downgrade to 4.1.1 with Sense 4 +?
Hello,
Can I make do downgrade to firmware 4.1.1 using RUU file from the official HTC firmware (1.15.605.4 RUU_DLX_WL_JB_45_VERIZON_WWE Radio_1.00.00.1023_3_NV_VZW_1.98_002_release_290923_signed.exe)?
Phone was not unblocking or rotated. This is after the update OTA. Where can I download the RUU and that I can easily use it to make a downgrade?
If such a downgrade would be possible if I could then possibly unlock (bootloader) phone and do S-OFF by Moonshine s-off and install costum roms, etc. .. ?
John823 said:
Stock OTA Update 4.2.2 - How do I downgrade to 4.1.1 with Sense 4 +?
Hello,
Can I make do downgrade to firmware 4.1.1 using RUU file from the official HTC firmware (1.15.605.4 RUU_DLX_WL_JB_45_VERIZON_WWE Radio_1.00.00.1023_3_NV_VZW_1.98_002_release_290923_signed.exe)?
Phone was not unblocking or rotated. This is after the update OTA. Where can I download the RUU and that I can easily use it to make a downgrade?
If such a downgrade would be possible if I could then possibly unlock (bootloader) phone and do S-OFF by Moonshine s-off and install costum roms, etc. .. ?
Click to expand...
Click to collapse
If you are trying to S_OFF your device, and you're on the latest firmware 3.06, then Rumrunner will get you where you want to be :good:
sdamark said:
If you are trying to S_OFF your device, and you're on the latest firmware 3.06, then Rumrunner will get you where you want to be :good:
Click to expand...
Click to collapse
Thanks for the quick reply
For now I would only do the downgrade and be on the stock ROM.
But if later I could do S-OFF, etc. ..? However, if you would like to have a costum ROM maybe in the future.
My question is still as before can I downgrade the RUU?
John823 said:
Thanks for the quick reply
For now I would only do the downgrade and be on the stock ROM.
But if later I could do S-OFF, etc. ..? However, if you would like to have a costum ROM maybe in the future.
My question is still as before can I downgrade the RUU?
Click to expand...
Click to collapse
AFAIK firmware is upgrade only. You can not downgrade firmware
Ok. So I have to do. Unlock the bootloader and do S-OFF as you write and use Costum ROMS.
I understand that it is no longer possible to definitively restore stock 4.1.1?
A stock 4.2.2 you will be able to come back as? In the event of warranty. Well I think?
Thank you for your advice ..
John823 said:
Ok. So I have to do. Unlock the bootloader and do S-OFF as you write and use Costum ROMS.
I understand that it is no longer possible to definitively restore stock 4.1.1?
A stock 4.2.2 you will be able to come back as? In the event of warranty. Well I think?
Thank you for your advice ..
Click to expand...
Click to collapse
Once you are unlocked you certainly can flash older version roms.
Yes you can always return to stock, for the most part, for warranty purposes.
John823 said:
Ok. So I have to do. Unlock the bootloader and do S-OFF as you write and use Costum ROMS.
I understand that it is no longer possible to definitively restore stock 4.1.1?
A stock 4.2.2 you will be able to come back as? In the event of warranty. Well I think?
Thank you for your advice ..
Click to expand...
Click to collapse
once you are s off you can ruu to a lower version, if you really want to

Need At&t Kitkat Htc One RUU, please!

I can't update OTA. I need file RUU Kitkat At&t HTC one now, please!
Why can't you update? RUU's come from HTC, if it's not on the site, it's not here. Remember RUU is Rom Update Utility, not a flash, not a zip but an exe.
hack14u said:
Why can't you update? RUU's come from HTC, if it's not on the site, it's not here. Remember RUU is Rom Update Utility, not a flash, not a zip but an exe.
Click to expand...
Click to collapse
I'm not in US
dzungbot said:
I can't update OTA. I need file RUU Kitkat At&t HTC one now, please!
Click to expand...
Click to collapse
This file does not exist currently. HTC Tech Support has no ETA on a release, either. You can keep checking the following link, as they will post the file there (or, at least they have in the past): http://www.htc.com/us/support/htc-one-att/news/
codejunkie83 said:
This file does not exist currently. HTC Tech Support has no ETA on a release, either. You can keep checking the following link, as they will post the file there (or, at least they have in the past): http://www.htc.com/us/support/htc-one-att/news/
Click to expand...
Click to collapse
Thanks. I checking this link everyday
Waiting....
hey i am also living outside US. and i successfully update my at&t htc one to 4.4.2.
you need s-off for this.
after so-off. just download this RUU file and flash it. you will get stock android 4.3
http://androidruu.com/getdownload.p....13_10.33.1150.01_release_318450_signed_2.exe
after this download and copy this OTA zip package and copy to you phone
http://www.androidfilehost.com/?fid=23329332407573841
after this just boot to the stock recovery and flash this zip and bingoooo. you are now on android kikat.
sorry for bad english
hope it will help you.
bilalbasra said:
hey i am also living outside US. and i successfully update my at&t htc one to 4.4.2.
you need s-off for this.
after so-off. just download this RUU file and flash it. you will get stock android 4.3
http://androidruu.com/getdownload.p....13_10.33.1150.01_release_318450_signed_2.exe
after this download and copy this OTA zip package and copy to you phone
http://www.androidfilehost.com/?fid=23329332407573841
after this just boot to the stock recovery and flash this zip and bingoooo. you are now on android kikat.
sorry for bad english
hope it will help you.
Click to expand...
Click to collapse
thanks, i unlocked bootloader, stock rom 4.3 and flash stock recovery but can't flash ota zip. Maybe i'm not s-off....and non root
dzungbot said:
thanks, i unlocked bootloader, stock rom 4.3 and flash stock recovery but can't flash ota zip. Maybe i'm not s-off....and non root
Click to expand...
Click to collapse
You font need to be s-off, maybe you just need root.
Sent from my HTC One using xda app-developers app
angramenyu said:
You font need to be s-off, maybe you just need root.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
What about this one RUU M7 UL K44 SENSE55 MR Cingular US 4.18.502.7 R10 Radio 4T.24.3218.09 10.26.1718.01L Release 356565 Signed 2?
http://www.htc1guru.com/dld/ruu_m7_...09_10-26-1718-01l_release_356565_signed_2-exe
I think that you can flash it without any issues
Try this
Here is a site that has a variety of Stock RUU roms
http://www.htc1guru.com/
I just extracted the rom.zip and flashed via fastboot command,works fine that way. [email protected] or soff needed,,but i do know with soff that ruu file would error out with 1.55 error until i did the option i listed...may help someone

[Q] Quick Question...t6spr

Which RUU do I need or is there one yet I can use to revert back to stock from NuSense 6.0 Rom for the Sprint Variant? Thanks!!
Skyymiles said:
Which RUU do I need or is there one yet I can use to revert back to stock from NuSense 6.0 Rom for the Sprint Variant? Thanks!!
Click to expand...
Click to collapse
Are you s-off? This matters when it comes to which RUU you should flash. Also do you want to go back to 4.3 or be on 4.4?
cstrife999 said:
Are you s-off? This matters when it comes to which RUU you should flash. Also do you want to go back to 4.3 or be on 4.4?
Click to expand...
Click to collapse
No, not S-off(unfortunately). So I guess I'm stuck on KitKat for the foreseeable future. Or wait until HTC releases an RUU for the official Sense 6 port to the Sprint HTC One Max to revert to stock being S-On?
Skyymiles said:
No, not S-off(unfortunately). So I guess I'm stuck on KitKat for the foreseeable future. Or wait until HTC releases an RUU for the official Sense 6 port to the Sprint HTC One Max to revert to stock being S-On?
Click to expand...
Click to collapse
I'd say s-off then flash one of the RUUs.

ota update and viper 2.0 rom?

I have a HTC One Max it is s-off routed and unlocked
I'm using the viper 1.01 rom verizon 4.3
I would like to use the viper 2.0 rom
kitkat 4.42. Will it work properly as I don,t
have the kitkat 4.42 ota update? What do I have to do
to get the ota update and use the viper 2.0 rom?
Or is it inbedded in the viper 2.0 rom.
I did try flashing it however could not get wi-fi to work.
I did try reading for this in viper forms -but ???
Dayliter said:
I have a HTC One Max it is s-off routed and unlocked
I'm using the viper 1.01 rom verizon 4.3
I would like to use the viper 2.0 rom
kitkat 4.42. Will it work properly as I don,t
have the kitkat 4.42 ota update? What do I have to do
to get the ota update and use the viper 2.0 rom?
Or is it inbedded in the viper 2.0 rom.
I did try flashing it however could not get wi-fi to work.
I did try reading for this in viper forms -but ???
Click to expand...
Click to collapse
I am not exactly sure if you need to take an OTA to be able to flash ViperMax 2.0.0. However, OTA will certainly upgrade your phone's bootloader which is 2.49.0.000
You need to unroot your phone to be able to take OTA.
To unroot:
* Restore stock backup
* flash stock recovery
* Relock your bootloader.
* After all of this, boot into stock recovery and Factory Rest and finally boot into your phone.
Now you should be able to receive OTA.
Let me know if you would need to know something else.
Sent from my HTC One max using XDA Premium 4 mobile app
viper 2.0 rom? if i could find out if ota update inbedded in the viper 2.0 rom. or
farazhassankhan said:
I am not exactly sure if you need to take an OTA to be able to flash ViperMax 2.0.0. However, OTA will certainly upgrade your phone's bootloader which is 2.49.0.000
You need to unroot your phone to be able to take OTA.
To unroot:
* Restore stock backup
* flash stock recovery
* Relock your bootloader.
* After all of this, boot into stock recovery and Factory Rest and finally boot into your phone.
Now you should be able to receive OTA.
Let me know if you would need to know something else.
Sent from my HTC One max using XDA Premium 4 mobile app
Click to expand...
Click to collapse
viper 2.0 rom?
if i could find out if ota update is inbedded in the viper 2.0 rom. or do i need it to use the kk 4.42 custom ROMS-cause rooting ,unlocking was hard for me the 1st goround
Dayliter said:
viper 2.0 rom?
if i could find out if ota update is inbedded in the viper 2.0 rom. or do i need it to use the kk 4.42 custom ROMS-cause rooting ,unlocking was hard for me the 1st goround
Click to expand...
Click to collapse
I didn't understand what you said. Come again please. ?
Sent from my HTC One max using XDA Premium 4 mobile app
Dayliter said:
viper 2.0 rom?
if i could find out if ota update is inbedded in the viper 2.0 rom. or do i need it to use the kk 4.42 custom ROMS-cause rooting ,unlocking was hard for me the 1st goround
Click to expand...
Click to collapse
The 4.4.2 firmware isn't included in Viper 2.0 rom. It can be installed as stated in farazhassankhan post or fastboot installation.
back to stock
jerrycycle said:
The 4.4.2 firmware isn't included in Viper 2.0 rom. It can be installed as stated in farazhassankhan post or fastboot installation.
Click to expand...
Click to collapse
ok ill give the directions farazhassankhan a try this week end --PS- THANKS
Dayliter said:
ok ill give the directions farazhassankhan a try this week end --PS- THANKS
Click to expand...
Click to collapse
if your s-off you don't want to change you bootloader, just install 2.0 and wait(if someone makes one)for a flashable firmware for s-off users.with stock recovery and hboot removed,
from version 4.3 to4.4.2
Aldo101t said:
if your s-off you don't want to change you bootloader, just install 2.0 and wait(if someone makes one)for a flashable firmware for s-off users.with stock recovery and hboot removed,
Click to expand...
Click to collapse
so you are saying I can flash 4.4.2 roms even tho I am on 4.3 right now (viper 1.0.1) I had tried viper 2. but could not get wi fi to work ------
Do you know if their is some kind of fix for that Wi-Fi ? or mabe it was just me or a bad download I had flashed.
I thought I had to take the OTA update to use 4.4.2 roms --Thanks for yall"s time and efort
Dayliter said:
so you are saying I can flash 4.4.2 roms even tho I am on 4.3 right now (viper 1.0.1) I had tried viper 2. but could not get wi fi to work ------
Do you know if their is some kind of fix for that Wi-Fi ? or mabe it was just me or a bad download I had flashed.
I thought I had to take the OTA update to use 4.4.2 roms --Thanks for yall"s time and efort
Click to expand...
Click to collapse
yeah you can flash it, are you on twrp 2.6.3.0 or higher no problem i would flash viperone 2.. clean flash that is.
wipe:
dalvic
cache
data
system
not the internal(be careful here, you don't check it by mistake
boot to recovery, tap wipe>advanced wipe, then select the above
if wifi still doesn't work you may need to flash the radio from the update. i don't have this phone so, maybe someone here will make a flashable for just the radio are you s-off??
yes i am s-off and got TWRP 2.7(VERIZON HTC one max--- guess i ant in on big hurry i dont even no what atvanatages the ota have over what i already got
Dayliter said:
yes i am s-off and got TWRP 2.7(VERIZON HTC one max--- guess i ant in on big hurry i dont even no what atvanatages the ota have over what i already got
Click to expand...
Click to collapse
Just an updated radio and hboot are the only difference. Who is your provider so I can link you to the correct its firmware.
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Verizon-htc one max
thayl0 said:
Just an updated radio and hboot are the only difference. Who is your provider so I can link you to the correct its firmware.
Sent from my HTC6600LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
VERIZON
Dayliter said:
VERIZON
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=51753483&postcount=129
Sent from my HTC6600LVW using XDA Premium 4 mobile app
boot.img
do i have to use a stock Rom or just go with the viper thats on my phone now)-----or will i have to unlock- root it again
how do i pull the boot.img from the ROM.zip that i am running --
(so please pull the boot.img from the ROM.zip that you're running, and put the boot.img ect.
dont see these answered in the forms tho i am still lookin (i want to get my Ducks in a Row Before i have a go at it)
Dayliter said:
do i have to use a stock Rom or just go with the viper thats on my phone now)-----or will i have to unlock- root it again
how do i pull the boot.img from the ROM.zip that i am running --
(so please pull the boot.img from the ROM.zip that you're running, and put the boot.img ect.
dont see these answered in the forms tho i am still lookin (i want to get my Ducks in a Row Before i have a go at it)
Click to expand...
Click to collapse
The boot.img is located in the vipe zip folder you download that has your rom.zip
Is that what you were asking?
It might just be easier for you to backup your data. And just flash either a stock rom or RUU and it will update itself.
i used RUU and got bootloop now i finaly got it to boot up in to bootloader but when i try to go to recovery it just bootloops Can anyone point me to
the rite direction(verizon htc one max) bootloader says unlocked -s-off -Hboot2.49 Radio 1.36.680122
restored
Dayliter said:
i used RUU and got bootloop now i finaly got it to boot up in to bootloader but when i try to go to recovery it just bootloops Can anyone point me to
the rite direction(verizon htc one max) bootloader says unlocked -s-off -Hboot2.49 Radio 1.36.680122
Click to expand...
Click to collapse
-------------------------------------------------------------------
Never mind i kelp tinkering till TWRP some how booted up and restored to a backup. Thank GOODNESS
Before i use verizon RU should i 1st flash( Stock_Rooted_VZW_2.16.605.2.zip) in place or my viper 1.0.1--
-I dont have my origanl stock or recovery---i am tryin to get the OTA 4.4.2 still-I had problems when i tryed with viper
also should my bootloader be locked or unlocked
Thanks

Help - Looking for Some Direction - Updating Firmware, s-off needed?

Hi everyone, I'm Josh and I'm a long time reader of XDA. I'm really struggling with the next steps on my HTC one despite reading ton's of information on XDA and many other sources. I could use some help / clarification.
I recently purchased an HTC One m7 ATT version. I've rooted, installed SuperSU, TWRP and unlocked the phone. I was stuck on choosing a rom but I've hit a new snag. I was going to try ViperOne but noticed they insist you install the latest firmware updates first. Here's where I'm lost. I'm running the stock version that came with my phone when it was locked.
Kitkat 4.4.2, Sense 6
FW# - 5.12.502.2
Hboot - 1.57
Radio - 4m.27.3218.14
I can't seem to get the OTA's, how do you get OTA's, do you have to run official att service sim like gophone? Or can you use straight talk like I currently have? Or do you not even need a sim for OTA's? I don't currently have a sim in the phone, was waiting to get all this sorted first. Will OTA's break root? Would it be beneficial to turn the phone into international version to get OTA's faster and would I lost the 4g lte abilities of phone if I did this?
How do I go about putting these firmware updates on, is s-off required even if you use a signed RUU from "androidruu dot com" for example?
I would like to get the latest official firmware releases on the phone and get it updated to kitkat 4.4.4 from the official releases and then put a custom rom on of my choice.
Is any of this even necessary? Are firmware updates included with the Rom's? How is an RUU different than a rom?
Someone, if possible please help me get this all sorted out, I'm so confused, it would be very much appreciated. Thanks!
jpcreativeimagery said:
I recently purchased an HTC One m7 ATT version. I've rooted, installed SuperSU, TWRP and unlocked the phone. I was stuck on choosing a rom but I've hit a new snag. I was going to try ViperOne but noticed they insist you install the latest firmware updates first. Here's where I'm lost. I'm running the stock version that came with my phone when it was locked.
Kitkat 4.4.2, Sense 6
FW# - 5.12.502.2
Hboot - 1.57
Radio - 4m.27.3218.14
I can't seem to get the OTA's, how do you get OTA's, do you have to run official att service sim like gophone? Or can you use straight talk like I currently have? Or do you not even need a sim for OTA's? I don't currently have a sim in the phone, was waiting to get all this sorted first. Will OTA's break root? Would it be beneficial to turn the phone into international version to get OTA's faster and would I lost the 4g lte abilities of phone if I did this?
Click to expand...
Click to collapse
You wont get OTA's unless you are stock, you can use this to get back to stock: http://forum.xda-developers.com/showthread.php?t=2775650 to be able to receive OTA updates.
jpcreativeimagery said:
Are firmware updates included with the Rom's? How is an RUU different than a rom?
Click to expand...
Click to collapse
No firmwares are never included in ROMs, and RUU reset your phone (both firmware and ROM) to fully stock, but you would need an RUU with same or higher version that you are on now. (with S-ON)
what is latest att firmware
@clsA, nkk71 and I have been talking on the #AndroidRevolution irc channel, we/I am trying to get this resolved to figure out if I need s-off in order to grab latest firmware's before I apply a custom rom because it seems att is way behind everyone else since the rest seem to be 6.0.something. Can you confirm what latest att firmware # is for htc one via their software update on the phone? I have reset phone to stock but it's still stuck on 5.12.xxx.xx (whatever the # is, don't remember right now) and claiming it's up-to-date, trying to figure out if boot-loader also has to be locked in addition to stock rom and stock recovery and root removed (cause I did all that but left bootloader unlocked), I've been reading that it does, but neither of us can confirm this. And do you need official att sim/service to do the updates? Additionally, could you direct to a list of signed firmware updates for flashing with s-on if this is not the latest firmware. Thanks!
clsA, just fyi, he used your Guru Reset ROM 5.12.502.2
but doesnt get any OTA updates
I tried it, but since i'm not on ATT, it doesnt even accept my device
nkk71 said:
clsA, just fyi, he used your Guru Reset ROM 5.12.502.2
but doesnt get any OTA updates
I tried it, but since i'm not on ATT, it doesnt even accept my device
Click to expand...
Click to collapse
@jpcreativeimagery
Well that may be because their have been no updates since that release
http://www.htc.com/us/support/htc-one-att/news/
clsA said:
@jpcreativeimagery
Well that may be because their have been no updates since that release
http://www.htc.com/us/support/htc-one-att/news/
Click to expand...
Click to collapse
aha :laugh:
quick question though.... seems ATT has it's own software update "solution"? flashed your Guru Reset ROM, and gave me "Device not provisioned" (or something like that), and the system update is not the usual htc system updated... weirdish (well, at least for me)
thanks bud
nkk71 said:
aha :laugh:
quick question though.... seems ATT has it's own software update "solution"? flashed your Guru Reset ROM, and gave me "Device not provisioned" (or something like that), and the system update is not the usual htc system updated... weirdish (well, at least for me)
thanks bud
Click to expand...
Click to collapse
Yes they do and you have to be on their network to even download the update on Wifi
clsA said:
Yes they do and you have to be on their network to even download the update on Wifi
Click to expand...
Click to collapse
nasty
nkk71 said:
nasty
Click to expand...
Click to collapse
Well their are enough working RUU + OTApkg.zip you don't really miss much
latest firmware
clsA said:
Well their are enough working RUU + OTApkg.zip you don't really miss much
Click to expand...
Click to collapse
@clsA, do you know of thread that list the latest firmware updates for flashing to an ATT M7_UL with s-off? I'm going to s-off the phone and bite the bullet with sunshine so i can take advantage of the latest firmware with a custom rom since ATT is so slow/behind with the software/firmware updates.
Thanks again for all your help and let me know.
jpcreativeimagery said:
@clsA, do you know of thread that list the latest firmware updates for flashing to an ATT M7_UL with s-off? I'm going to s-off the phone and bite the bullet with sunshine so i can take advantage of the latest firmware with a custom rom since ATT is so slow/behind with the software/firmware updates.
Thanks again for all your help and let me know.
Click to expand...
Click to collapse
Sure ... I recommend converting to the Developers edition for the most updates
after your s-off Change your CID fastboot oem writecid BS_US001
then flash this RUU >> http://www.androidruu.com/getdownlo...8_10.38r.1157.04L_release_353887_signed_3.exe
And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)
I'm uploading the file's I used Here >> https://www.androidfilehost.com/?w=files&flid=24178
Their is also a RUU now from HTC >> http://dl3.htc.com/application/RUU_...4_10.33E.1718.01L_release_404528_signed_2.exe
bricked / boot hang / fixed with reset
clsA said:
Sure ... I recommend converting to the Developers edition for the most updates
after your s-off Change your CID fastboot oem writecid BS_US001
then flash this RUU >>
And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)
I'm uploading the file's I used Here >>
Click to expand...
Click to collapse
@clsA, thank you so much for that, I actually ended up following @vomer 's guide and turning it into super CID because it seemed that the firmware updates were newer than the developer ones oddly enough, 6.0.9 and 6.0.9.xxx.10 and then there's 6.0.9.xxx.11 and .12 but this is where i hit a snag, all went smoothly using vomers firmwares up till 6.0.9.xxx.10 but then i tried to flash the .11 and .12 from ARHD and the device bricked/ hangs on boot....ended up having to use adb push to get your reset on there and reset the device, flash the original firmware etc...phone is working again (I was tempted to panic but maintained control ;P) but ultimately means i wasted a bunch of time only to have start over again....for now I've left it 5.12 and stock....maybe you could help figure out what went wrong when you get a chance.
Thanks.!
i left recovery and root on during the reset just in case it didn't work but did flash back the stock radio for that rom as well
jpcreativeimagery said:
i left recovery and root on during the reset just in case it didn't work but did flash back the stock radio for that rom as well
Click to expand...
Click to collapse
Theirs nothing wrong with the Stock 5.12.502 firmware from AT&T in fact it's one of the most stable. You can flash mostly any rom you want with that firmware installed. The reason I recommend the Developer edition right now is because Lollipop+Sense is due out any day now on that model.
how to proceed
clsA said:
Theirs nothing wrong with the Stock 5.12.502 firmware from AT&T in fact it's one of the most stable. You can flash mostly any rom you want with that firmware installed. The reason I recommend the Developer edition right now is because Lollipop+Sense is due out any day now on that model.
Click to expand...
Click to collapse
@clsA, I was bent on the firmware update to take advantage of latest enhancements with ARHD and they recommended at least v6 xxx .11 eventhough the rom is based on v6 xxx.12, viperone also strongly advised latest firmware updates....does the developer versions you sent me have the calling fix for when the audio in the call was lost because of google update? Also, quick question, why did you include the 4 xxx something base firmware...i can just proceed with the CID change and start at the 6 series firmwares because I'm already at later version with att stock 5.12 right?
Any idea what happened the other night with the bricking - would boot, hang on black screen after first htc logo on white background and then just have the hardware touch buttons lit....was it because the firmwares ARHD posted required the bootloader to be re-locked? (failed to notice this until after I had semi-bricked it)
Also, what backup app would you recommend? looking to restore all my apps and settings after these wipes etc...getting tired of redoing it all again each time.
Thanks!
jpcreativeimagery said:
@clsA, I was bent on the firmware update to take advantage of latest enhancements with ARHD and they recommended at least v6 xxx .11 eventhough the rom is based on v6 xxx.12, viperone also strongly advised latest firmware updates....does the developer versions you sent me have the calling fix for when the audio in the call was lost because of google update? Also, quick question, why did you include the 4 xxx something base firmware...i can just proceed with the CID change and start at the 6 series firmwares because I'm already at later version with att stock 5.12 right?
Any idea what happened the other night with the bricking - would boot, hang on black screen after first htc logo on white background and then just have the hardware touch buttons lit....was it because the firmwares ARHD posted required the bootloader to be re-locked? (failed to notice this until after I had semi-bricked it)
Also, what backup app would you recommend? looking to restore all my apps and settings after these wipes etc...getting tired of redoing it all again each time.
Thanks!
Click to expand...
Click to collapse
The Developers Edition 4.x RUU is the last RUU .. then it's 3 updates and your at the current version and ready for the Lollipop update
The ARHD International firmware needs the MID changed to work, You can eather edit the android_info.txt or change you MID to make them work
clsA said:
The Developers Edition 4.x RUU is the last RUU .. then it's 3 updates and your at the current version and ready for the Lollipop update
The ARHD International firmware needs the MID changed to work, You can either edit the android_info.txt or change you MID to make them work
Click to expand...
Click to collapse
@clsA, hmm, did not see that anywhere in the post...def. did not change MID...but they did specify needing locked bootloader, any idea why? will either of those cause the boot problem I described? Or can the firmware after 6.xxx.10 be incompatible with the att stock rom and i actually needed to flash a rom before proceeding?
When you said earlier "And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)" you mean flash them or can take them via the OTA update service....in the dev edition does the built in OTA update service work with unlock and root?
what version does .401 mean, is that international? I know the .1540 designates developer edition.
What backup for settings and apps would you recommend, would titanium suffice?
Thanks again for all the help.
jpcreativeimagery said:
@clsA, hmm, did not see that anywhere in the post...def. did not change MID...but they did specify needing locked bootloader, any idea why? will either of those cause the boot problem I described? Or can the firmware after 6.xxx.10 be incompatible with the att stock rom and i actually needed to flash a rom before proceeding?
When you said earlier "And then you can take OTA updates up to the current 6.07.1540.2 (3 updates I think)" you mean flash them or can take them via the OTA update service....in the dev edition does the built in OTA update service work with unlock and root?
what version does .401 mean, is that international? I know the .1540 designates developer edition.
What backup for settings and apps would you recommend, would titanium suffice?
Thanks again for all the help.
Click to expand...
Click to collapse
Lollipop is coming in the next few days. Just go back to post #11 and flash the RUU and the OTA updates
I gave you the link to all the file's I used. Your S-off no need to lock the bootloader and you flash the OTA updates from stock recovery yourself
just download them all to your phone sdcard and flash them in order.
I use HTC Backup is all I need. And google keeps my contacts and calender
clsA said:
Lollipop is coming in the next few days. Just go back to post #11 and flash the RUU and the OTA updates
I gave you the link to all the file's I used. Your S-off no need to lock the bootloader and you flash the OTA updates from stock recovery yourself
just download them all to your phone sdcard and flash them in order.
I use HTC Backup is all I need. And google keeps my contacts and calender
Click to expand...
Click to collapse
@clsA: What bout with:
** Tampered **
** unlocked **
M7_UL PVT SHIP S-OFF RH
HBOOT-1.56.0000
RaDIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
Jan 28 2014, 09.32.41.0
Should I follow the same procedure? I want to try out the GPE Lollipop. Just wondering which firmware I should flash?
fc3211 said:
@clsA: What bout with:
** Tampered **
** unlocked **
M7_UL PVT SHIP S-OFF RH
HBOOT-1.56.0000
RaDIO-4T.24.3218.09
OpenDSP-v32.120.274.0909
OS-4.18.502.7
eMMC-boot 2048MB
Jan 28 2014, 09.32.41.0
Should I follow the same procedure? I want to try out the GPE Lollipop. Just wondering which firmware I should flash?
Click to expand...
Click to collapse
Depends on what you mean "Try Out " ? you aether convert to Full GPe or you flash a rom.
If you convert, you simple change your CID and flash the RUU.
If you want to just see if it's for you, flash the rom .. I like this one >> http://forum.xda-developers.com/htc-one/development/rom-google-play-edition-lollipop-v1-00-t2963927
But it does require the latest firmware so yes post #11 would get you to the newest firmware

Categories

Resources